SEARCH · USGS Science
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Aftershocks offer valuable clues to earthquake behavior. The challenge: quickly deploying sensors to capture the early details of earthquake ruptures within the zone of aftershocks. Telecommunication fibers might be an answer, providing denser networks in otherwise difficult areas, potentially faster than traditional methods.
The U.S. Geological Survey, in cooperation with the Gulf Coast Ecosystem Restoration Council, has used MODFLOW 6 to develop a groundwater-flow model to simulate groundwater and surface-water interactions in the Mobile Bay, Alabama, area. The model results indicated that, on average, groundwater discharge near the coastline is equal to 2.5 percent of the surface water that flows into the bay. The model was also used to determine how changes in recharge, sea level, and groundwater pumping affect groundwater levels and discharge rates. The results indicate that more groundwater discharge occurred in the winter and spring when recharge was higher, sea level was lower, and groundwater pumping was lower than during the summer and fall. Additionally, the amount of emergent groundwater was closely related to sea level; when sea level was higher, there was more area with emergent groundwater. Furthermore, the depth of nonemergent groundwater was related to trends in recharge and pumping. During periods of increased recharge and reduced pumping, a significant portion of the model area exhibited a depth to the water table of less than 1 meter below the land surface. Conversely, during periods of decreased recharge and heightened pumping, much of the model area showed a depth to the water table ranging from 1 to 5 meters.
This study examined the origin of graphite mineralization in the Mesoproterozoic Adirondack Highlands. Flake graphite was mined from the historic mining district around Ticonderoga, New York, USA, from the 1850s to the 1920s. Most of the production and reserves from the district are disseminated graphite from feldspathic quartz schists (e.g., Dixon-American Graphite Co. mine, Faxon property, Flake Graphite Company). Protolith sediments of the schists were deposited in the Trans-Adirondack backarc basin at ca. 1.25 Ga and were metamorphosed to high grade at 1.18–1.15 Ga during the accretionary Shawinigan orogeny and at 1.09–1.02 Ga during the Ottawan phase of the Grenvillian orogeny. Major elements and carbon isotopes of graphite from schists (δ 13 C = −28.1‰ to −5.4‰ relative to Vienna Peedee belemnite) are consistent with derivation from organic carbon in protolith sandstones that devolatilized during metamorphism. Some small mines and prospects in the district mined graphitic calcite marbles and clinopyroxene ± scapolite skarns associated with a pegmatite suite dated by U-Pb in zircon to 1.04–1.01 Ga (e.g., Lead Hill and Crown Point deposits), and rare graphite veins are observed at several deposits. Hydrothermal flake graphite from pegmatites, skarns, and veins are distinct from graphite in schist-hosted deposits and have δ 13 C values that cluster around −7‰ to −5‰, consistent with deposition from igneous CO 2 . Covariation of carbon and oxygen stable isotopes and U-Pb zircon geochronology are not compatible with precipitation from fluids derived from country rock metapelites or marbles. Some graphite districts elsewhere show compelling evidence for remobilization and redeposition of sedimentary-derived carbon as hydrothermal graphite, sometimes as thick veins producing world-class, high-grade deposits. In the Adirondacks, there is evidence for two generations of graphite mineralization with distinct carbon sources: syngenetic graphite with an organic origin in Shawinigan quartz schists and epigenetic graphite with an igneous origin in Ottawan skarns and pegmatites.
The Medicine Lodge thrust system, exposed in east-central Idaho and southwest Montana, is a major segment of the North America Cordilleran fold and thrust belt on which Precambrian and Paleozoic rocks have been telescoped and transported far east of their depositional area. The fault has overlapped rocks that initially were deposited in differing sedimentary environments on opposite sides of the northwest-trending geanticlinal Lemhi arch. The nature of the arch itself has been obscured by later thrusting, but it can be roughly reconstructed as a major landmass recurrently uplifted from Precambrian Y time at least through the Mesozoic. Although sections of the large landmass have been identified in the past as small islands, it was instead a southern extension of Belt island, and exerted a major influence on sedimentation patterns. The thrust has obscured recognition of correlative sedimentary rock units. It also appears to have controlled the distribution of volcanic rocks in satellite centers of the main field of Challis Volcanics. The thrust system has exerted a major influence on the emplacement of granodiorite-quartz monzonite stocks and related mineral deposits in east-central Idaho. Recognition of the fault as a major influence in intrusive activity and deposition of metallic mineral deposits suggests new possibilities for mineral resource exploration in this region. And consideration of the stratigraphic, paleogeographic, and structural framework of sedimentary rocks beneath the thrust suggests the possibility of petroleum and natural gas resources in the region north of the Snake River Plain.
The Zuni Salt Lake is located in a maar in west-central New Mexico and contains hypersaline water that has long been used by Native Americans for religious purposes and the collection of salt. There have been several investigations suggesting different sources for the water and salt to the lake. Springs, seeps, and ephemeral streamflow have all been observed to contribute freshwater to the lake, and brackish to hypersaline seeps have been documented along the banks of the lake. This report summarizes the findings of a study that characterizes the lake’s hydrology, its water and salinity sources, and the hydrogeologic conceptual model. Regional groundwater levels indicate that each of the aquifers in the area have the potential to discharge groundwater to the lake. There is also evidence of vertical groundwater flow pathways at the maar that were likely created by the igneous intrusion that fractured the intersecting aquifers. A detailed water budget was constructed from continuous lake stage, precipitation, and evaporation data to estimate the groundwater inflow to the Zuni Salt Lake. It was determined that groundwater inflow to the lake is 441 ±94 acre-feet per year, which composes as much as 77 percent of the total inflows. The high sodium and chloride concentrations measured in two hypersaline samples collected near the lake indicate that the majority of the dissolved solids entering the lake are from a hypersaline groundwater source. The geochemical and isotopic compositions measured in the lake and surrounding features support the interpretation that hypersaline groundwater is the primary source of salts to the lake, which is likely sourced from the older (and deeper) Permian units. The hypersaline groundwater samples collected during this investigation have a unique aqueous chemistry relative to each of the mapped aquifers, and variability in groundwater compositions is interpreted to result from differences in minerology and residence time.
An investigation of the potential contamination of ground water from septic tank systems blasted in bedrock in Williamson and Davidson Counties, Tennessee, was conducted during 1988-89. Water samples were collected from domestic and observation wells, springs, and surface-water sites in a residential subdivision in the northern part of Williamson County near Nashville. The subdivision has a high density of septic-tank field lines installed into blasted bedrock Water samples also were collected from a well located in an area of Davidson County where field lines were installed in 5 feet of soil. Samples were analyzed for major inorganic constituents, nutrients, total organic carbon, optical brighteners, and bacteria. Although results of analyses of water samples from wells indicate no effect of septic-tank effluent on ground-water quality at these sites, water from two springs located downgradient from the subdivision had slightly larger concentrations of nitrite plus nitrate (2.2 and 2.7 milligrams per liter N), and much larger concentrations of fecal coliform and fecal streptococci bacteria (2,000 to 3,200 and 700 to 900 colonies per 100 milliliters of sample, respectively), than other wells and springs sampled during 1988. Water from one of these springs contained optical brighteners, which indicates that septic-tank effluent is affecting ground-water quality.
Aftershock forecasts can help communities reduce their seismic risk by conveying how many aftershocks can be expected following a large earthquake, and how the expected number of aftershocks and their corresponding ground shaking evolves over time and space. Prior work finds that graphical forecast products may communicate such information better than only text or numbers. To identify which visual products can serve multiple user groups, we held workshops with members of several professions, including emergency managers, engineers, critical infrastructure operators, public health specialists, science communicators, and more. We conducted these workshops in El Salvador, Mexico and the United States to understand which forecast products may be effective across different countries. In these workshops, users performed small-group activities to elicit the types of aftershock forecast information that would support decisions in their respective roles and how this information would optimally be displayed. Maps of shaking hazards were frequently requested across all professions and countries, even for dissimilar forecast uses. The design of these maps, and other product needs, were differentiated by profession, country and other factors. Other forecast products, including those showing forecasts about the magnitudes and time periods of future aftershocks, also served a variety of users, but for different types of decisions. We found a greater variation in user needs by profession than by country, and that user needs also vary with time, communication channel and other contextual factors. We discuss practical implications for user-centered visual communication of operational aftershock forecasts.
The U.S. Geological Survey Astrogeology Science Center houses the Meteor Crater sample collection, an assemblage of over 2,500 meters of cuttings from 161 drill holes into Meteor Crater’s rim, flanks, and ejecta blanket. We have utilized this unique collection to study the composition and spatial distribution of impact-generated materials from within the ejecta blanket. Meteor Crater has historically been known to have generated only a relatively small amount of impact melt compared to other terrestrial craters of similar size. A detailed compositional and textural dataset of impact-derived melts from this impact can therefore be a useful asset in improving our understanding of crater formation, and in particular impact melt formation. We have characterized 42 impact-melt particles from Meteor Crater using a scanning electron microscope and an electron microprobe for textural and compositional analysis. We analyzed samples from six drill holes in the ejecta blanket, situated to the northwest, southeast, south, and southwest of the crater (ejecta northeast of the crater is devoid of impact melts). Impact melts were collected from drill cuttings at various depths within the ejecta blanket, ranging from a few centimeters below the surface down to ~6.5 meters. Backscattered electron (BSE) images were acquired for each analyzed impact-melt particle. To characterize the various textures and phases present in each impact melt, we also took many detailed BSE images. Our geochemical analyses include full spectral profiles using energy dispersive X-ray spectrometry and well-calibrated wavelength dispersive spectrometry for a number of phases, including minerals (olivine, pyroxene, and so on), pristine glass, and metallic inclusions. The full dataset is available in ScienceBase as a data release (Gullikson and others, 2024), accessible at https://doi.org/10.5066/P9OGAJ8P . Our goal for this Open-File Report is to provide a summary of this immense dataset, details on data collection, descriptions of the different phases observed within impact-melt particles (both geochemically and texturally), and observable trends.
The distribution functions for statistics that may be used to assess the significance of differences between sample means, standard deviations, coefficients of skewness, and coefficients of variation are obtained by Monte Carlo experiments. The distributions are expressed as functions of sample size, cross correlation, and skewness. In general, the distributions are more sensitive to cross correlation than to skewness. As sample size increases, however, the distributions tend to become more sensitive to skewness.
Much of the southeastern United States, including all of Florida, is covered by flat-lying sedimentary strata of the Atlantic and Gulf Coastal Plains which have accumulated since Middle Jurassic time. The pre-Middle Jurassic rocks that underlie these coastal plains in Florida, here collectively referred to as “basement,” are known only from a relatively small number of boreholes. This scientific investigations map presents an interpretation of the basement geology in a 1:1,000,000-scale subsurface geologic map with supporting text, data, and figures. The subsurface mapping methodology integrates petrographic, geochronological, thermochronological, geochemical, and mineralogical analyses of drill cores and cuttings in the context of regional geophysical data. The pre-Middle Jurassic rocks of Florida consist of the Gondwanan (West African) Suwannee terrane which was accreted to Laurentia during the Alleghanian orogeny and subsequently intruded by Permian granites, superposed by early Mesozoic rift basins, and partially overlain by bimodal Jurassic volcanic rocks. The younger basement components, specifically the Southwest Florida volcanic province, North Florida tholeiites, early Mesozoic rift basins, and Alleghanian granitoids, have correlative and contemporaneous units throughout the Appalachian orogen. In contrast, Florida’s older basement rocks, including Paleozoic siliciclastic strata of the Suwannee basin, North Florida volcanic series, Osceola and Gaskin intrusive complexes, and the St. Lucie Metamorphic Complex, have neither surface exposures nor unequivocal correlates. Major structures include early Mesozoic normal faults and northwest-striking transfer zones such as the Jay fault. Many of these faults define the boundaries of subbasins within the South Georgia rift system. Top-of-basement structure contours show gentle arches and embayments that are also recognized in overlying coastal plain strata.
Detailed understanding of crustal components and tectonic history of forearcs is important due to their geological complexity and high seismic hazard. The principal component of the Cascadia forearc is Siletzia, a composite basaltic terrane of oceanic origin. Much is known about the lithology and age of the province. However, glacial sediments blanketing the Puget Lowland obscure its lateral extent and internal structure, hindering our ability to fully understand its tectonic history and its influence on modern deformation. In this study, we apply map-view interpretation and two-dimensional modeling of aeromagnetic and gravity data to the magnetically stratified Siletzia terrane revealing its internal structure and characterizing its eastern boundary. These analyses suggest the contact between Siletzia (Crescent Formation) and the Eocene accretionary prism trends northward under Lake Washington. North of Seattle, this boundary dips east where it crosses the Kingston arch, whereas south of Seattle the contact dips west where it crosses the Seattle uplift (SU). This westward dip is opposite the dip of the Eocene subduction interface, implying obduction of Siletzia upper crust at this southern location. Elongate pairs of high and low magnetic anomalies over the SU suggest imbrication of steeply-dipping, deeply rooted slices of Crescent Formation within Siletzia. We hypothesize these features result from duplication of Crescent Formation in an accretionary fold-thrust belt during the Eocene. The active Seattle fault divides this Eocene fold-thrust belt into two zones with different structural trends and opposite frontal ramp dips, suggesting the Seattle fault may have originated as a tear fault during accretion.
The 2020 moment magnitude ( M w ) 6.5 Stanley, Idaho, earthquake raised questions about the history and extent of complex faulting in the northwestern Centennial Tectonic Belt (CTB) and its relation to the Sawtooth normal fault and Eocene Trans‐Challis fault system (TCFS). To explore faulting in this area, we excavated a paleoseismic trench across the Sawtooth fault along the western margin of the CTB, and compared an early Holocene (9.1 ± 2.1 ka, 1δ ) rupture at the site with lacustrine paleoseismic data and fault mapping in the 2020 epicentral region. We find: (1) a history of partial to full rupture of the Sawtooth fault ( M w 6.8–7.4), (2) that shorter ruptures ( M w ≤ 6.9 ) are likely along distributed and discontinuous faults in the epicentral region, (3) that this complex system that hosted the 2020 earthquake is not directly linked to the Sawtooth fault, (4) that the northeast‐trending TCFS likely plays a role in controlling fault length and rupture continuity for adjacent faults, and (5) that parts of the TCFS may facilitate displacement transfer between normal faults that accommodate crustal extension and rotation. Our results help unravel complex faulting in the CTB and imply that relict structures can help inform regional seismic hazard assessments.
Abyssal marine turbidites provide some of the longest and most spatially extensive records of subduction zone earthquake recurrence globally; however, correlation of these deposits over long distances and interpretation of synchronous emplacement requires both an understanding of the turbidite generating systems and precise dating. Here, we present an integrated suite of high-resolution bathymetry, subbottom profiles, and sediment cores from combined autonomous underwater vehicle, remotely operated vehicle, and ship-based studies at a key paleoseismic site in the southern Cascadia subduction zone. We demonstrate how widespread, earthquake-triggered landslides on the lower slope deposit discrete, proximal mass transport deposits (MTDs) that grade offshore into complex, interfingered abyssal turbidites, which correspond to records of megathrust earthquake history. We propose accretion and oversteepening of thrust folds on the lower slope both preconditions the slope to fail and provides a perpetual source of unstable material to fail during every earthquake cycle. Furthermore, we suggest the periodic and pervasive landsliding indicates coseismic deformation of the outer accretionary wedge during megathrust rupture.
Karst subterranean estuaries within globally ubiquitous carbonate aquifers are coastal groundwater ecosystems that provide an essential water resource for human populations. To understand the drivers of salinization within a coastal aquifer in the Yucatan Peninsula (Mexico), we employed hydroacoustics in flooded caves to observe how oceanic and atmospheric events facilitate mixing between the meteoric lens (fresh-brackish groundwater) and the saline groundwater on tidal and episodic timescales. Precipitation during Tropical Storm Carlotta increased the flow and salinity of the meteoric lens without evidence for vertical mixing across the halocline. We postulate that vertical migration of haloclines in the conduit relative to those within the rock matrix during precipitation creates lateral density gradients that drive mixing, and ultimately creates a brackish layer within the meteoric lens. These results provide a mechanistic explanation for vertical and lateral exchange in a coastal carbonate aquifer, which has implications for groundwater response to future climatic change.
Many Mississippi River Delta studies have shown recent declines in fluvial sediment load from the river and associated land loss. In contrast, recent sedimentary processes on the subaqueous delta are less documented. To help address this knowledge gap, multicores were collected offshore from the three main river outlets at water depths of 25–280 m in June 2017 just after the peak river discharge period, with locations selected based on 2017 U.S. Geological Survey seabed mapping. The coring locations included the undisturbed upper foreset, mudflow lobes, gullies, and the undisturbed prodelta. Nine multicores were analyzed for Beryllium-7 activity, and four cores were analyzed for excess Thorium-234 activity via gamma spectrometry, granulometry and X-radiography. Our results indicate a general trend of declining 7 Be and 234 Th activities and inventories with increasing distance from sources and in deeper water. The core X-radiographs are graded from the predominantly physically stratified nearshore to the more bioturbated offshore, consistent with the sedimentation patterns. Sediment focusing assessed via the 7 Be and 234 Th sediment inventories shows preferential sedimentation in gully and lobe environments, whereas the upper foreset and prodelta focusing factors are relatively depleted. Overall, short-term sediment deposition from the main fluvial source remains active offshore from all three major river outlets, despite the overall declining river load.
In the steep and mountainous environment of western Oregon, debris flows pose a considerable threat to property, infrastructure and life. Wildfire is commonly known to increase the susceptibility of steep slopes to debris flows, but the extent of this process in the western Cascades is not well understood. The US Geological Survey (USGS) currently estimates postfire debris-flow likelihood and triggering rainfall thresholds using a model calibrated to a southern California inventory of debris flows generated by excess runoff within the first year after fire. Because of a lack of available data, this model has not been tested in western Oregon, or in locations where postfire debris flows initiate via other mechanisms (e.g., shallow landslides or in-channel failures). Using repeat field observations and aerial imagery, we developed two new debris-flow inventories within and adjacent to the perimeters of five 2020 wildfires in western Oregon: Archie Creek, Holiday Farm, Beachie Creek, Lionshead and Riverside. The first inventory focuses on postfire debris flows (2020–2022); the second focuses on debris flows prior to fires (1995–2020). Our inventories of prefire and postfire debris flows were used to document initiation mechanisms in Oregon's western Cascades and to evaluate the effects of wildfire. We found that wildfire changed the distribution of debris-flow initiation mechanisms in the western Cascades. After the wildfires, annual rates of runoff-generated debris flows increased by 22% and the number of shallow landslide-initiated debris flows decreased by 17% relative to before the wildfires. Despite this shift, shallow landsliding was the dominant debris-flow initiation mechanism in both unburned and burned environments. We found the performance of the current USGS debris-flow likelihood model was degraded relative to other previously tested locations across the intermountain western United States. Our results highlight the need for improved postfire hazard assessment in western Oregon based on regional model calibration that is tuned to the dominant debris-flow initiation mechanisms.
Geometrically complex, multifault ruptures have been observed in recent, damaging earthquakes in southeastern California, sparking renewed efforts to identify physical conditions that promote or inhibit fault discontinuity-spanning coseismic ruptures. The likelihood of ruptures propagating across fault discontinuities is thought to be partly controlled by fault geometries, rupture direction, and the history of strain release. However, these parameters vary in space and time over multiple earthquake cycles, making it difficult to forecast the likelihood that an earthquake on one fault will trigger rupture on a nearby fault. Here we use tectono-geomorphic mapping of a geometrically complex fault zone in Panamint Valley, southeastern California, to assess spatiotemporal variations of paleo-rupture patterns and geometries of fault discontinuities over multiple earthquake cycles. First, we identify ten generations of late Pleistocene to Holocene alluvium using geomorphic parameters and luminescence dating to constrain ages of alluvium and bracket late Holocene earthquake timing. Then, we quantify slip kinematics using high-resolution structure from motion digital surface models. We find the Panamint Valley transtensional relay (PVTR) hosted four late Holocene earthquakes, bracketed to ~5.8–3.4 ka, ~3.8–2.2 ka, ~2.4–0.6 ka, and ~0.64–0.16 ka, with ~0.6–1.1 m of slip per event, correlative to Mw ≈ 6.7–6.9 earthquakes. Additionally, we find similarities in earthquake timing on the Ash Hill, PVTR, and Panamint Valley faults and similarities in the slip magnitude and slip kinematics between the Ash Hill and PVTR faults, implying that the PVTR may co-rupture with nearby faults. Paleo-rupture patterns indicate that seismogenic strain transfer may occur through the PVTR, along different combinations of fault segments and jump distances, over multiple earthquake cycles. These data highlight the utility of tectono-geomorphic mapping in evaluating paleo-rupture patterns and suggest that the PVTR may act to propagate and/or arrest rupture between the Ash Hill and Panamint Valley faults.
The rate of earthquakes in a region is a fundamental input to Probabilistic Seismic Hazard Analysis. We present a Monte Carlo method for computing that rate from seismicity catalogs while including a range of data and analysis uncertainties. This method is applied to regions for which the b value is assumed to be spatially invariant. Each region is broken down into epochs for which each epoch is estimated to have a uniform magnitude of completeness ( M c ). The distribution of earthquake rates for M ≥ M c is determined for each epoch by considering the Poisson likelihood of rates given the number of observed earthquakes with M ≥ M c . We use a Monte Carlo process to include the uncertainty in b , M c , and individual event magnitudes. The result for each epoch is the joint distribution of the Poisson rate of earthquakes with magnitudes larger than the minimum value used to calculate hazard ( M 1 ) and the Gutenberg–Richter b values, which control the extrapolation to other magnitudes. The rate for each region is either the duration‐weighted average over the epochs or, to better capture temporal variations, we also consider mixture models. The mixture models also provide an avenue to allow temporal variations in b values. To implement this joint distribution in a logic tree, we use the mean and 95% confidence branches, each of which is parameterized with an M ≥ M 1 rate and b value. We explore different ways of defining those branches, as well as non‐Gutenberg–Richter branches, and their impact on hazard estimates. The mean hazard, but not the fractiles, is robust with respect to these choices. To illustrate these new methods, we use synthetic data and catalogs from recent U.S. Geological Survey National Seismic Hazard Models for the Central and Eastern United States and for Puerto Rico and the U.S. Virgin Islands.