SEARCH · USGS Science
Results for “Tectonics”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Premetamorphic down-to-basin faulting, folding, and tectonic dewatering, Rangeley area, western Maine
The Rangeley area of western Maine is underlain by a thick sequence of dominantly eugeosynclinal metasedimentary rocks of Ordovician, Silurian, and Devonian age. The dominant structural pattern of these rocks is defined by tight, upright, northeast-trending passive flow folds and by three major normal faults along which younger rocks on the southeast are down-faulted against older rocks on the northwest. Each normal fault, together with a major syncline and a complementary anticline farther southeast, defines a geometrically related fault-fold unit. In best-exposed units, displacement along the faults increases in the direction of plunge of the synclines and of increasing structural relief in the syncline-anticline pairs. A genetic relation between normal faulting and folding is inferred. The dominant fault-fold pattern represents the oldest recognized deformation in the area. Slaty or phyllitic cleavage of this deformation is typically subparallel to the axial surfaces of folds, but locally crosses the faults and the axial surfaces of tight folds at low angles. Metamorphosed clastic dikes along the cleavage suggest that cleavage formation was in part a diagenetic dewatering process. This process probably graded, however, into low-grade metamorphism at depth. It was quickly followed by emplacement of large plutons, local superposed passive slip and flexural slip folding, and by two recognized events of greenschist and amphibolite facies metamorphism. Porphyroblasts of these events have grown across slip cleavages as well as older phyllitic cleavage, and metamorphic zones cross the dominant fault-fold pattern. Deformation, as well as sedimentation, is considered to have been controlled by the ancestral Merrimack synclinorium—a strongly linear two-sided trough that persisted at least from Late Ordovician through Early Devonian time. The fault-fold pattern is inferred to have evolved over a long period of time, as follows: (1) Rapid deposition of 15,000 to 20,000 ft of nearly-impermeable clastic sediments in Late Ordovician and Early Silurian time on the southeast-dipping slope of the sedimentary trough; mass weakened in depth by excess fluid pressure. (2) Continuing sedimentation, down-to-basin creep with associated slump faulting and folding, probably beginning in Middle Silurian time; faults flattened basinward in depth along lower boundary of zone of excess fluid pressure. (3) Horizontal compression developed parallel to slide direction as mass piled against material in the trough; incipient slaty cleavage developed normal to compression, improving vertical permeability. (4) Pore fluids expelled vertically, permitting the slumping mass to compact horizontally, and fold with at least 25 percent shortening. The process culminated in Early Devonian time, during and after deposition of the youngest exposed rocks in the area.
Small plate tectonics in the northeastern Pacific
Lithospheric plate motions in the northeastern Pacific were complicated at about 2.5 m.y. B.P. by the movement along a major northeast-trending fault cutting Cascadia Basin. An estimate of the slip rate along this fault gives critical information on the relative motions of four geometrically interdependent blocks. The fault is presently inactive. Seventy km of slip along this fault during 2 m.y. or less gives an average slip rate of about 3-5 cm/yr or greater, and resulting plate motions suggest a significantly greater rate of net subduction along the continental margin off Oregon than off Washington and Vancouver Island. Subduction rate off Oregon is less sensitive to slip rate along this fault than is subduction off Washington.
Tertiary igneous chronology of the Great Basin of western United States — Implications for tectonic models
The chronology of igneous activity in the Great Basin of western United States is used as a time framework for a simple plate model. This chronology suggests that a plate (Farallon plate) became underthrust to sufficient depth by the middle Tertiary to trigger the eruption of volcanic rocks of andesitic to rhyolitic composition in the central part of the Great Basin, 40 m.y. ago. This plate continued to be underthrust until about 19 m.y. ago, at which time it was completely consumed and volcanic activity ceased. When the oceanic ridge reached a certain point under the Great Basin about 16 m.y. ago, this resulted in the widespread eruption of olivine basalt and the main initial phase of Basin and Range faulting.
Plate tectonic model for the evolution of the eastern Bering Sea Basin
The eastern Bering Sea Basin, composed of the Aleutian and Bowers Basins, is flanked to the north by Mesozoic foldbelts that probably represent zones of plate subduction in Mesozoic time. Present plate subduction occurs 400 to 1,000 km farther south, at the Aleutian Trench. North-south magnetic lineations that formed at an oceanic spreading ridge, probably in Mesozoic time (117 to 132 m.y. ago), have been identified in the Aleutian Basin. The orientation and age of those anomalies can be explained by reconstructing Kula-Farallon Pacific plate motions during late Mesozoic–early Tertiary time. In Mesozoic time, subduction of the Kula plate occurred north of the Aleutian Trench near the present location of the Bering Sea continental margin. At about 70 m.y. B.P. (Late Cretaceous), the zone of subduction shifted south to the present location of the Aleutian Trench, thereby trapping a fragment of oceanic plate imprinted with north-south magnetic lineations within the eastern Bering Sea Basin. A stable basin framework has prevailed behind the Aleutian arc since early Tertiary time.
The Dunbar Gneiss-granitoid dome: Implications for early Proterozoic tectonic evolution of northern Wisconsin
The Dunbar dome in northeastern Wisconsin is a critical structural feature in the early Proterozoic Penokean orogen. It provides exposures of gneisses (Dunbar Gneiss) that structurally underlie the voluminous metavolcanic rocks of northeastern Wisconsin, and exposures of abundant granitoid rocks ranging from tonalite to granite. The granitoid rocks cut both the gneisses in the core and the supracrustal (cover) metavolcanic rocks and were emplaced essentially along the core-cover boundary. The Dunbar Gneiss is calc-alkaline and was derived from volcanic and intrusive rocks of intermediate composition. The various intrusive rocks have calcic, calc-alkaline, and alkali to alkali-calcic compositions, and they progress with time to more SiO 2 and K 2 -rich compositions. U-Pb zircon ages indicate that accumulation of the layered rocks in the core and cover, deformation and metamorphism, and intrusion of the granitoid rocks spanned a relatively short time, ∼1865–1835 Ma. We interpret the dome as being a large-scale, fold-interference structure resulting from polydeformation modified by diapirism. Northeast-oriented folds (F 3 ) and a related mylonitic foliation (S 3 ), nearly confined to the dome, are superposed on northwest-oriented folds (F 2 ) that developed during regional deformation. In the core-cover boundary, these structures are obliterated by a zone of intense deformation—a mylonitic foliation and a steeply plunging stretching lineation—as much as 500 m wide, which we interpret as resulting from diapirism. Metamorphic zoning is concentric: amphibolite facies in inner parts of the mantle and greenschist facies in the outer part of the mantle. The Wisconsin magmatic terrane, as represented by the rocks in the Dunbar dome, differs from the epicratonic, early Proterozoic sedimentary-volcanic sequence (Marquette Range Supergroup) in Michigan, to the north, in stratigraphy, structure, and volume and composition of igneous rocks. Whereas the basalts in northern Michigan are compositionally similar to continental rift basalts, the volcanic rocks in the Dunbar dome have over-all island-arc compositional affinities. The over-all calc-alkaline compositions of the intrusive rocks are similar to those in magmatic arcs formed at convergent plate-margin settings. Accordingly, we interpret the Wisconsin magmatic terrane as an oceanic-arc complex that was sutured to the North American continent during development of the Penokean orogen. Similar interpretations based on broad regional observations have been proposed previously.
Origin and tectonic evolution of the Maclaren and Wrangellia terranes, eastern Alaska Range, Alaska
Major portions of the eastern Alaska Range, south of the Denali fault, in the McCarthy, Nabesna, Mount Hayes, and eastern Healy quadrangles, consist predominantly of the Maclaren and Wrangellia tectono-stratigraphic terranes. The Maclaren terrane consists of the Maclaren Glacier metamorphic belt and the regionally deformed and metamorphosed East Susitna batholith. The Maclaren Glacier metamorphic belt is composed of argillite, metagraywacke, and sparse andesite flows that are progressively regionally metamorphosed from lower greenschist facies to middle amphibolite facies near the East Susitna batholith. The East Susitna batholith is composed of gabbro, quartz diorite, granodiorite, and sparse quartz monzonite. Isotopic ages are as old as a K-Ar hornblende age of 87.5 m.y., possibly reset, and a U-Pb zircon age of 70 m.y. The batholith is intensely deformed and regionally metamorphosed under conditions of the middle amphibolite facies. The Wrangellia terrane is divided into two subterranes: (1) the Slana River subterrane, composed of late Paleozoic andesite to dacite flows, tuff, limestone, and argillite, unconformably overlying massive basalt flows of the Triassic Nikolai Greenstone, Late Triassic limestone, and younger Mesozoic flysch; and (2) the Tangle subterrane, a deeper-water equivalent of the Slana River subterrane, composed of late Paleozoic and Early Triassic aquagene tuff, chert, minor andesite tuff and flows, limestone, unconformably overlying pillow basalt and massive basalt flows of the Triassic Nikolai Greenstone, and Late Triassic limestone. Both subterranes are intruded by locally extensive gabbro and diabase dikes and by cumulate mafic and ultramafic sills. Less extensive terranes (two) are the Clearwater terrane, a sequence of intensely deformed chlorite schist, muscovite schist, marble, and greenstone of Late Triassic age; and an unnamed terrane of ultramafic and associated rocks of presumable Paleozoic or Mesozoic age. Each terrane or subterrane generally has (1) a distinctive time-stratigraphic sequence reflecting a unique geologic history; (2) a missing provenance for bedded sedimentary or volcanic rocks; and (3) bounding thrust or strike-slip faults, interpreted as accretionary sutures. The Maclaren and Wrangellia terranes are juxtaposed along the Broxson Gulch thrust, which consists of an imbricate series of north-dipping thrust faults. Paralleling the Broxson Gulch thrust, a few kilometres to the south, is the north-dipping Eureka Creek thrust, along which are juxtaposed the Slana River and Tangle subterranes. The Maclaren terrane is correlated with the Kluane Schist and the Ruby Range batholith in the southern Yukon Territory, which represent the northward extension of the Taku and Tracy Arm terranes. If correct, this correlation defines a minimum displacement of the Maclaren terrane along the Denali fault of ∼400 km. The Maclaren terrane is interpreted to have formed in a synorogenic Andean-type arc setting on the west margin of Mesozoic North America in the middle to late Mesozoic and early Cenozoic. The Wrangellia terrane is interpreted to have initially formed in an island-arc setting during the late Paleozoic. Subsequently in the Late Triassic, the Wrangellia terrane underwent rifting near the paleoequator, with formation of the Nikolai Greenstone and associated mafic and ultra-mafic igneous rocks. In the middle and late Mesozoic, Wrangellia migrated toward, and was accreted during, the middle Cretaceous to the Maclaren terrane along the Broxson Gulch thrust. Subsequent dispersion of both the Maclaren and Wrangellia terranes along the Denali fault and the Broxson Gulch thrust commenced during the early Tertiary and continues through the present.
Petrology and tectonic significance of augen gneiss from a belt of Mississippian granitoids in the Yukon-Tanana terrane, east- central Alaska
An approximately E-W-trending belt of porphyritic peraluminous granitic rocks, metamorphosed and deformed to augen gneiss, is exposed for 400 km across the Yukon-Tanana terrain. Chemical, textural, and isotopic data from large augen-gneiss bodies indicate that these bodies originated as early Mississippian granitic rocks that assimilated, or were anatectically derived from, early Proterozoic crust or metasedimentary rocks. This plutonic belt probably formed in a middle Palaeozoic continental magmatic arc that developed near the edge of a Precambrian craton somewhere along the western margin of North America and was later translated NW to its present location. U/Pb zircon data and concordance of augen-gneiss contacts with metamorphic layering and with probable late-stage sills suggest that regional metamorphism to amphibolite facies of these rocks was synchronous (late kinematic) with intrusion of the porphyritic granitic protolith. -L.di H.
Jurassic ash-flow sheets, calderas, and related intrusions of the Cordilleran volcanic arc in southeastern Arizona: Implications for regional tectonics and ore deposits
Volcanologic, petrologic, and paleomagnetic studies of widespread Jurassic ash-flow sheets in the Huachuca-southern Dragoon Mountains area have led to identification of four large source calderas and associated comagmatic intracaldera intrusions. Stratigraphic, facies, and contact features of the caldera-related tuffs also provide constraints on the locations, lateral displacements, and very existence for some major northwest-trending faults and inferred regional thrusts in south-eastern Arizona. For example, the intricate Cochise thrust system, as mapped by others in the southern Dragoon Mountains, consists instead of primary depositional contacts within caldera-fill megabreccia, and the inferred regional thrusts do not exist, at least as previously interpreted. Silicic alkalic compositions of the Jurassic caldera-related, ash-flow tuffs; bimodal associated mafic magmatism; and interstratified coarse sedimentary deposits provide evidence for synvolcanic extension and rifting within the Cordilleran magmatic arc. Gold-copper mineralization is associated with subvolcanic intrusions at several of the Jurassic calderas.
A relation among geology, tectonics, and velocity structure, western to central Nevada Basin and Range
In the northwestern to central Nevada Basin and Range, there are correlations between velocity and specific geologic structures of the crust. Mapped range-bounding faults at the surface can be traced to appreciable (10 km) depths based on velocity variations and are consistent with subsurface projections of the faults based on seismic reflection images. The limiting depth of the faults, as indicated by the velocity variations, corresponds to the maximum depth of earthquakes along the seismic profile. Correlations between velocity and the surface geology show that in the upper crust the pre-Cenozoic rocks are underlain by high-velocity (6.0 km/s) rocks, whereas the Tertiary ranges are underlain by lower-velocity (4.0-5.7 km/s) rocks to depths as great as 10 km. Although the Tertiary rocks differ in composition from the Mesozoic rocks, the lower-velocity Tertiary rocks may also be attributed to rock masses which are broken (4.0-5.7 km/s), and the higher-velocity Mesozoic rocks (6.0 km/s) may be attributed to largely unbroken rock masses. The regional seismicity pattern is consistent with this interpretation, as earthquakes are largely confined within or near the base of the low-velocity rocks. These low-velocity, highly fractured rocks are laterally distributed in discrete zones, suggesting that extension is not uniformly distributed but occurs in discrete, highly extended zones. Beneath these highly extended zones, the lower-crustal layers show structural evidence of extension, and velocity measurements suggest that the lowermost crust has been magmatically underplated. The superposition of Tertiary volcanic rocks, highly fractured upper crust, and lower-crustal magmatic underplating suggests that the Tertiary volcanic rocks originated from lower-crustal magmas that migrated to the surface via the highly extended zones. The velocity structure of one of the highly extended zones and the Lahonton Basin resembles that of many continental rifts. The velocity structure beneath central Nevada, however, is much more like normal continental crust. On the basis of isotopic studies, it is concluded that the transition between highly extended crust and more normal crust occurs in the area inferred to be the edge of the North American craton.
Isotopic complexities and the age of the Delfonte volcanic rocks, eastern Mescal Range, southeastern California: Stratigraphic and tectonic implications
Combined U-Pb zircon, Rb-Sr, 40 Ar/ 39 Ar laser-fusion, and conventional K-Ar geochronology establish a late Early Cretaceous age for the Delfonte volcanic rocks. U-Pb zircon analyses define a lower intercept age of 100.5 ± 2 Ma that is interpreted as the crystallization age of the Delfonte sequence. Argon studies document both xenocrystic contamination and postemplacement Ar loss. Rb-Sr results from mafic lavas at the base of the sequence demonstrate compositionally correlated variations in initial 87 Sr/ 86 Sr ratios (Sr i ) from 0.706 for basalts to 0.716 for andesitic compositions. This covariation indicates substantial mixing of subcontinental lithosphere with Proterozoic upper crust. Correlations between Rb/Sr and Sr i may result not only in pseudoisochrons approaching the age of the crustal component, but also in reasonable but incorrect apparent ages approaching the true age. Ages obtained in this study require that at least some of the thrust faulting in the Mescal Range-Clark Mountain portion of the foreland fold-and-thrust belt occurred later than ca. 100 Ma and was broadly contemporaneous with emplacement of the Keystone thrust plate in the Spring Mountains to the northeast. Comparison of the age and Rb-Sr systematics of ash-flow tuff boulders in the synorogenic Lavinia Wash sequence near Goodsprings, Nevada, with those of the Delfonte volcanic rocks supports a Delfonte source for the boulders. The 99 Ma age of the Lavinia Wash sequence is nearly identical to the Delfonte age, requiring rapid erosion, transport, and deposition following Delfonte volcanism.
Tectonic controls on magmatism in the Geysers-Clear Lake region: Evidence from new geophysical models
In order to study magmatism and geothermal systems in The Geysers–Clear Lake region, we developed a detailed three-dimensional tomographic velocity model based on local earthquakes. This high-resolution model resolves the velocity structure of the crust in the region to depths of approximately 12 km. The most significant velocity contrasts in The Geysers–Clear Lake region occur in the steam production area, where high velocities are associated with a Quaternary granitic pluton, and in the Mount Hannah region, where low velocities occur in a 5-km-thick section of Mesozoic argillites. In addition, a more regional tomographic model was developed using traveltimes from earthquakes covering most of northern California. This regional model sampled the whole crust, but at a lower resolution than the local model. The regional model outlines low velocities at depths of 8–12 km in The Geysers–Clear Lake area, which extend eastward to the Coast Range thrust. These low velocities are inferred to be related to unmetamorphosed Mesozoic sedimentary rocks. In addition, the regional velocity model indicates high velocities in the lower crust beneath the Clear Lake volcanic field, which we interpret to be associated with mafic underplating. No large silicic magma chamber is noted in either the local or regional tomographic models. A three-dimensional gravity model also has been developed in the area of the tomographic imaging. Our gravity model demonstrates that all density contrasts can be accounted for in the upper 5–7 km of the crust. Two-dimensional magnetotelluric models of data from a regional, east-west profile indicate high resistivities associated with the granitic pluton in The Geysers production area and low resistivities in the low-velocity section of Mesozoic argillites near Mount Hannah. No indication of midcrustal magma bodies is present in the magnetotelluric data. On the basis of heat flow and geologic evidence, Holocene intrusive activity is thought to have occurred near the Northwest Geysers, Mount Hannah, Sulphur Bank Mine, and perhaps other areas. The geophysical data provide no conclusive evidence for such activity, but the detailed velocity model is suggestive of intrusive activity near Mount Hannah similar to that in the “felsite” of The Geysers production area. The geophysical models, seismicity patterns, distribution of volcanic vents, heat flow, and other data indicate that small, young intrusive bodies that were injected along a northeast trend from The Geysers to Clear Lake probably control the thermal regime.
Active tectonics of the Seattle fault and central Puget sound, Washington - Implications for earthquake hazards
We use an extensive network of marine high-resolution and conventional industry seismic-reflection data to constrain the location, shallow structure, and displacement rates of the Seattle fault zone and crosscutting high-angle faults in the Puget Lowland of western Washington. Analysis of seismic profiles extending 50 km across the Puget Lowland from Lake Washington to Hood Canal indicates that the west-trending Seattle fault comprises a broad (4–6 km) zone of three or more south-dipping reverse faults. Quaternary sediment has been folded and faulted along all faults in the zone but is clearly most pronounced along fault A, the northernmost fault, which forms the boundary between the Seattle uplift and Seattle basin. Analysis of growth strata deposited across fault A indicate minimum Quaternary slip rates of about 0.6 mm/yr. Slip rates across the entire zone are estimated to be 0.7–1.1 mm/yr.
Potential seismic hazards and tectonics of the upper Cook Inlet basin, Alaska, based on analysis of Pliocene and younger deformation
The Cook Inlet basin is a northeast-trending forearc basin above the Aleutian subduction zone in southern Alaska. Folds in Cook Inlet are complex, discontinuous structures with variable shape and vergence that probably developed by right-transpressional deformation on oblique-slip faults extending downward into Mesozoic basement beneath the Tertiary basin. The most recent episode of deformation may have began as early as late Miocene time, but most of the deformation occurred after deposition of much of the Pliocene Sterling Formation. Deformation continued into Quaternary time, and many structures are probably still active. One structure, the Castle Mountain fault, has Holocene fault scarps, an adjacent anticline with flower structure, and historical seismicity. If other structures in Cook Inlet are active, blind faults coring fault-propagation folds may generate M w 6–7+ earthquakes. Dextral transpression of Cook Inlet appears to have been driven by coupling between the North American and Pacific plates along the Alaska-Aleutian subduction zone, and by lateral escape of the forearc to the southwest, due to collision and indentation of the Yakutat terrane 300 km to the east of the basin.
Mesozoic and Cenozoic tectonics of the eastern and central Alaska Range: Progressive basin development and deformation in a suture zone
Analysis of late Mesozoic and Cenozoic sedimentary basins, metamorphic rocks, and major faults in the eastern and central Alaska Range documents the progressive development of a suture zone that formed as a result of collision of an island-arc assemblage (the Wrangellia composite terrane) with the former North American continental margin. New basin-analysis, structural, and geochronologic data indicate the following stages in the development of the suture zone: (1) Deposition of 3-5 km of Upper Jurassic-Upper Cretaceous marine strata (the Kahiltna assemblage) recorded the initial collision of the island-arc assemblage with the continental margin. The Kahiltna assemblage exposed in the northern Talkeetna Mountains represents a Kimmeridgian-Valanginian backarc basin that was filled by northwestward-flowing submarine-fan systems that were transporting sediment derived from Mesozoic strata of the island-arc assemblage. The Kahiltna assemblage exposed in the southern Alaska Range represents a Valanginian-Cenomanian remnant ocean basin filled by west-southwestward-flowing submarine-fan systems that were transporting sediment derived from Paleozoic continental-margin strata uplifted in the along-strike suture zone. A belt of retrograde metamorphism and a regional anticlinorium developed along the continental margin from 115 to 106 Ma, roughly coeval with the end of widespread deposition in the Kahiltna sedimentary basins. (2) Metamorphism of submarine-fan deposits of the Kahiltna basin, located near the leading edge of the island-arc assemblage, occurred at ca. 74 Ma, as determined from a new U-Pb zircon age for a synkinematic sill. Coeval with metamorphism of deposits of the Kahiltna basin in the southern part of the suture zone was development of a thrust-top basin, the Cantwell basin, in the northern part of the suture zone. Geologic mapping and compositional data suggest that the 4 km of Upper Cretaceous nonmarine and marginal marine sedimentary strata in this basin record regional subaerial uplift of the suture zone. (3) Shortening and exhumation of the suture zone peaked from 65 to 60 Ma on the basis of metamorphic and geochronologic data. In the southern part of the suture zone, submarine-fan deposits of the Kahiltna basin, which had been metamorphosed to kyanite schists at ???25 km depth and ???650 ??C, were exhumed and cooled through the biotite closure temperature (???300 ??C) by ca. 62 Ma. In the northern part of the suture zone, this time period was marked by shortening, uplift, and erosion of sedimentary strata of the Cantwell basin. (4) From 60 to 54 Ma, ???3 km of volcanic strata were deposited over deformed sedimentary strata of the Cantwell basin, and several granitic plutons (the McKinley sequence) were emplaced along the suture zone. (5) Following igneous activity, strikeslip displacement occurred from ca. 54 to 24 Ma along the Denali fault system, which had developed in the existing suture zone. Late Eocene-Oligocene strike-slip displacement resulted in the formation of several small sedimentary basins along the Denali fault system. (6) Regional transpressive shortening characterized the suture zone from ca. 24 Ma to the present. Flexural subsidence, related to regional shortening, is represented by late Eocene to Holocene nonmarine deposits of the Tanana foreland basin. Regional subsidence resulted in Miocene coal seams up to 20 m thick and well-developed lacustrine deposits. Overlying the Miocene deposits are ???1.2 km of Pliocene and Holocene conglomeratic deposits. Compositional and paleocurrent data from these younger deposits record regional Neogene uplift of the suture zone and recycling of detritus from older basins to the south that had become incorporated into the uplifted suture zone. Geologic mapping of major thrust faults along the northern and southern margins of the suture zone documents Paleozoic strata thrust over both Pliocene fluvial deposits and Quaternary glacial deposits of the Tanana basin.
Westward tidal lag as the driving force of plate tectonics
As spreading at known interarc basins occurs to the west of westward-dipping subduction zones, and movement of the lower plates is also to the west, it is suggested that all plates move chiefly westward. Rates of motion are equal to a net difference between eastward and westward transport on semidiurnal tidal bulges. Eastward-dipping subduction zones at the leading edges of plates that are primarily continental are overridden by less dense material and are forced to step westward. Yet lines of downbending of westward-dipping subduction zones are fixed with respect to the lower mantle, and interarc basins result from westward movement of their adjacent plates. These fixed subduction zones can be used to calibrate previously measured movement between plates; they suggest that the westward transport imparted during each tidal cycle is as much as 0.3 mm.