SEARCH · USGS Science

Results for “Project Completion Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

USGS2020

Preliminary bedrock geologic map of the Lahore 7.5-minute quadrangle, Orange, Spotsylvania, and Louisa Counties, Virginia

Introduction Bedrock geologic mapping of the Lahore, Va., 7.5-minute quadrangle was completed as part of a broader project, undertaken jointly between the U.S. Geological Survey, the Virginia Division of Geology and Mineral Resources, and other Federal and State agencies to better understand the causative mechanisms of the magnitude-5.8 (M5.8) earthquake that occurred near Mineral, Va., on August 23, 2011. This project involved detailed mapping of eight quadrangles in the epicentral region of the Mineral, Va., earthquake in order to improve our understanding of the geologic framework of the central Virginia seismic zone, which has a long record of historical and prehistoric seismicity. The Lahore 7.5-minute quadrangle contains the contact between Ordovician to Silurian, dioritic and granodioritic rocks of the Lahore and Ellisville plutons and older metasedimentary and metavolcanic rocks. The Lahore quadrangle is northeast of the Ferncliff and Louisa, Va., quadrangles, where the Shores complex is intruded by the Ellisville pluton along the pluton’s southwestern margin. The new mapping in the Lahore quadrangle shows that the Shores complex continues northeast of the Ellisville pluton. A northeast-trending mafic- and ultramafic-bearing belt within the Shores complex is a fault-bounded accretionary zone (accretionary wedge) between rocks of the Chopawamsic Formation and Laurentian slope-and-rise deposits. In the Lahore quadrangle, this belt contains several mappable, northeast- to southwest-trending mafic bodies and also includes small exposures of gabbro and talc schist. The Lahore quadrangle contains structures of both early- and late-Paleozoic age that correspond to the Taconic and Alleghanian orogenies. Taconic (Late Ordovician) S 1 schistosity in layered rocks is typically fine-grained and parallel to compositional layering, when present. Alleghanian (Pennsylvanian) S 2 schistosity is coarser and more micaceous than S 1 and is locally accompanied by a lineation that is represented by mineral lineations, micro-crenulations, or mullion fabric, and represents the hinges of F 2 folds. A foliation in the plutonic rocks is represented by an equilibrium assemblage of aligned mafic minerals and is early Paleozoic in age. Metamorphic grade in the non-plutonic rocks of the Lahore quadrangle ranges from lower-greenschist to the northwest to upper-greenschist to the southeast, as represented by mineral assemblages in non-plutonic rocks. The biotite isograd may be, in part, lithologically controlled by the contact between the informally-named Hardware and Byrd Mill formations, and locally affected by contact metamorphism by the Lahore pluton (western part of map). The Taconic garnet isograd is defined by the sparse presence of small (less than 1 millimeter), euhedral garnet crystals. Both the biotite and garnet isograds continue along strike to the southwest into the Ferncliff and Louisa quadrangles, where the isograds have been identified as Ordovician age (Taconic orogeny) based on muscovite, biotite, and amphibole 40 Ar/ 39 Ar cooling ages. Regionally, the most common trend and plunge of joints is northwest and subvertical, respectively, and orthogonal to the regional strike of foliation. Early Mesozoic extension may have reactivated the Harris Creek fault (southeast corner of map), a late Paleozoic (Alleghanian orogeny) transpressional fault that marks the contact between granodiorite of the Ellisville pluton and the Chopawamsic Formation.

Virginia↗

USGS2014

Integrated synoptic surveys of the hydrodynamics and water-quality distributions in two Lake Michigan rivermouth mixing zones using an autonomous underwater vehicle and a manned boat

The U.S. Geological Survey (USGS), in cooperation with the National Monitoring Network for U.S. Coastal Waters and Tributaries, launched a pilot project in 2010 to determine the value of integrated synoptic surveys of rivermouths using autonomous underwater vehicle technology in response to a call for rivermouth research, which includes study domains that envelop both the fluvial and lacustrine boundaries of the rivermouth mixing zone. The pilot project was implemented at two Lake Michigan rivermouths with largely different scales, hydrodynamics, and settings, but employing primarily the same survey techniques and methods. The Milwaukee River Estuary Area of Concern (AOC) survey included measurements in the lower 2 to 3 miles of the Milwaukee, Menomonee, and Kinnickinnic Rivers and inner and outer Milwaukee Harbor. This estuary is situated in downtown Milwaukee, Wisconsin, and is the most populated basin that flows directly into Lake Michigan. In contrast, the Manitowoc rivermouth has a relatively small harbor separating the rivermouth from Lake Michigan, and the Manitowoc River Watershed is primarily agricultural. Both the Milwaukee and Manitowoc rivermouths are unregulated and allow free exchange of water with Lake Michigan. This pilot study of the Milwaukee River Estuary and Manitowoc rivermouth using an autonomous underwater vehicle (AUV) paired with a manned survey boat resulted in high spatial and temporal resolution datasets of basic water-quality parameter distributions and hydrodynamics. The AUV performed well in these environments and was found primarily well-suited for harbor and nearshore surveys of three-dimensional water-quality distributions. Both case studies revealed that the use of a manned boat equipped with an acoustic Doppler current profiler (ADCP) and multiparameter sonde (and an optional flow-through water-quality sampling system) was the best option for riverine surveys. To ensure that the most accurate and highest resolution velocity data were collected concurrently with the AUV surveys, the pilot study used a manned boat equipped with an ADCP. Combining the AUV and manned boat datasets resulted in datasets that are essentially continuous from the fluvial through the lacustrine zones of a rivermouth. Whereas the pilot studies were completed during low flows on the tributaries, completion of surveys at higher flows using the same techniques is possible, but the use of the AUV would be limited to areas with relatively low velocities (less than 2 feet per second) such as the harbors and nearshore zones of Lake Michigan. Overall, this pilot study aimed at evaluation of AUV technology for integrated synoptic surveys of rivermouth mixing zones was successful, and the techniques and methods employed in this pilot study should be transferrable to other sites with similar success. The use of the AUV provided significant time savings compared to traditional sampling techniques. For example, the survey of outer Milwaukee Harbor using the AUV required less than 7 hours for approximately 600 profiles compared to the 150 hours it would have taken using traditional methods in a manned boat (a 95 percent reduction in man-hours). The integrated datasets resulting from the AUV and manned survey boat are of high value and present a picture of the mixing and hydrodynamics of these highly dynamic, highly variable rivermouth mixing zones from the relatively well-mixed fluvial environment through the rivermouth to the stratified lacustrine receiving body of Lake Michigan. Such datasets not only allow researchers to understand more about the physical processes occurring in these rivermouths, but they provide high spatial resolution data required for interpretation of relations between disparate point samples and calibration and validation of numerical models.

Wisconsin↗

USGS2013

Identification of metrics to monitor salt marsh integrity on National Wildlife Refuges in relation to conservation and management objectives

Executive Summary Most salt marshes in the US have been degraded by human activities, and threats from physical alterations, surrounding land-use, species invasions, and global climate change persist. Salt marshes are unique and highly productive ecosystems with high intrinsic value to wildlife, and many National Wildlife Refuges (NWRs) have been established in coastal areas to protect large tracts of salt marsh and wetland-dependent species. Various management practices are employed routinely on coastal NWRs to restore and enhance marsh integrity and ensure ecosystem sustainability. Prioritizing NWR salt marshes for application of management actions and choosing among multiple management options requires scientifically-based methods for assessing marsh condition. Monitoring is integral to structured decision-making (SDM), a formal process for decomposing a decision into its essential elements. Within a natural resource context, SDM involves identifying management objectives, alternative management actions, and expected management outcomes. The core of SDM is a set of criteria for measuring system performance and evaluating management responses. Therefore, use of SDM to frame natural resource decisions leads to logical selection of monitoring attributes that are linked explicitly to management needs. We used SDM to guide selection of variables for monitoring the ecological integrity of salt marshes within the National Wildlife Refuge System (NWRS). Our objectives were to identify indicators of salt marsh integrity that are effective across large geographic regions, responsive to a wide range of threats, and feasible to implement within funding and staffing constraints of the NWRS. In April, 2008, we engaged interdisciplinary experts in a week-long rapid prototyping SDM workshop to define the essential elements of salt marsh management decisions on refuges throughout the northeastern, southwestern, and northwestern US, corresponding to respective Regions 5, 2, and 1 of the US Fish and Wildlife Service (FWS). Through this process we identified measurable attributes for monitoring salt marsh ecosystems that are integrated into conservation practice and target management objectives. The following salt marsh attributes were identified through the SDM process either for describing state condition to determine management needs or for evaluating the achievement of management objectives: historical condition and geomorphic setting; ditch density; surrounding land use; ratio of open water area to vegetation area; rate of pesticide application; environmental contaminant concentration; change in marsh surface elevation relative to sea level rise; tidal range and groundwater level; surface topography; salinity; and species composition and abundance of vegetation, invasive species, invertebrates, nekton, and breeding and wintering birds. The identified attributes were too broadly defined to serve as operational monitoring variables. Therefore, we tested specific metrics for quantifying most of these attributes in summers of 2008 and 2009. The first four attributes in the above list can be characterized by office-based analysis of existing GIS data layers. The remaining attributes require field-based methods for assessment. We were forced to exclude a small number of attributes from field tests due to inconsistent data (pesticide application rate, environmental contaminant concentrations) or requirements that exceeded the scope of this project (change in marsh surface elevation; surface topography; benthic invertebrates; wintering birds). We evaluated potential metrics for evaluating all remaining field attributes. In partnership with NWRS biologists, we tested rapid versus intensive metrics for monitoring field attributes (tidal range and groundwater level; marsh surface elevation; salinity; and species composition and abundance of vegetation, invasive species, nekton, and breeding birds) at coastal refuges throughout FWS Region 5. Seven refuges participated in metric testing in 2008: Rachel Carson (ME), Parker River (MA), Wertheim (NY), E. B. Forsythe (NJ), Bombay Hook (DE), Prime Hook (DE), and Eastern Shore of Virginia Complex (VA). These seven and two additional refuges participated in metric testing in 2009: Rhode Island Complex (RI) and Stewart B. McKinney (CT). We based all field metrics on existing protocols for salt marsh assessment. Sampling locations were determined randomly within delineated marsh study units (MSUs) at each refuge. Detailed field methods are provided in appendices to this report. Measurements for individual metrics were averaged across samples within MSUs during each year of sampling. Each year, correlation or regression analysis was conducted on average measurements across MSUs within each attribute set to identify redundant metrics. Statistical redundancy between a pair of metrics within an attribute set (i.e., correlation or regression slopes with p-values < 0.05) was considered justification for eliminating one of the pair from the regional set of monitoring metrics. Decisions regarding metric elimination versus retention were based on feasibility of monitoring, considering such factors as sampling time, resources required, and potential for regional standardization in implementation. The result of these tests is a reduced suite of monitoring metrics that targets NWRS management decisions and is practicable for implementing on a regional scale. Based on these tests, we recommend the following list of metrics for monitoring integrity of NWRS salt marshes (marsh attribute category is in parentheses): (historical condition and geomorphic setting) position of marsh in the landscape, marsh shape, degree of fill and/or fragmentation, degree of tidal flushing, amount of aquatic edge; (ditch density) ranking of ditch density from none to severe; (surrounding land use) relative proportion of agricultural land in a 150-m buffer around the marsh, relative proportion of natural land in a 150-m buffer around the marsh, relative proportion of natural land in a 1-km buffer around the marsh; (ratio of open water area to vegetation area) ratio of open water to emergent herbaceous wetlands within the marsh; (marsh surface elevation) elevation referenced to NAVD88 in a representative area of the marsh; (tidal range and groundwater level) percent of time the marsh surface is flooded during deployment of a continuous water-level monitor at a representative marsh location, mean depth of surface flooding as measured by a continuous water-level monitor at a representative location; (salinity) salinity measured in surface water; (vegetation community) vegetation species richness using the point-intercept method in 100-m diameter survey plots, percent cover of various marsh community types within 100-m diameter survey plots; (invasive species abundance) percent cover of invasive plant species measured using the point-intercept method in 100-m diameter survey plots; (nekton community) nekton density, nekton species richness, length of Fundulus heteroclitus ; (breeding bird community) abundance of Willets counted per point during standard call-broadcast surveys, summed abundance of tidal marsh obligate species (Clapper Rail, Willet, Saltmarsh Sparrow, Seaside Sparrow) counted per point during standard call-broadcast surveys. Metrics describing the historical condition, geomorphic setting, and broad landscape features can be assessed using existing GIS databases. Our results support use of rapid methods to assess the majority of field metrics; only those used to describe the nekton community must be measured using intensive methods (throw traps or ditch nets, dependant on habitat configuration). Implementation of these metrics for quantitative assessment of NWRS salt marsh integrity in FWS Region 5 requires developing sampling designs for each refuge. Additionally, it is important to determine how the monitoring information will be used within a management context. SDM should be used to complete the analysis of salt marsh management decisions. The next steps would involve 1) prioritizing and weighting the management objectives; 2) predicting responses to individual management actions in terms of objectives and metrics; 3) using multiattribute utility theory to convert all measurable attributes to a common utility scale; 4) determining the total management benefit of each action by summing utilities across objectives; and 5) maximizing the total management benefits within cost constraints for each refuge. This process would allow the optimum management decisions for NWRS salt marshes to be selected and implemented based directly on monitoring data and current understanding of marsh responses to management actions. Monitoring the outcome of management actions would then allow new monitoring data to be incorporated into subsequent decisions.

Connecticut, Delaware, Maine, Massachusetts, New J↗

USGS2015

Initial characterization of the groundwater system near the Lower Colorado Water Supply Project, Imperial Valley, California

In 2009, the U.S. Geological Survey, in cooperation with the city of Needles, began a study of the hydrogeology along the All-American Canal, which conveys water from the Colorado River to the Imperial Valley. The focus of this study was to gain a better understanding of the effect of lining the All-American Canal, and other management actions, on future total dissolved solids concentrations in groundwater pumped by Lower Colorado Water Supply Project wells that is delivered to the All-American Canal. The study included the compilation and evaluation of previously published hydrogeologic and geochemical information, establishment of a groundwater-elevation and groundwater-quality monitoring network, results of monitoring groundwater elevations and groundwater quality from 2009 to 2011, site-specific hydrologic investigations of the Lower Colorado Water Supply Project area, examination of groundwater salinity by depth by using time-domain electromagnetic surveys, and monitoring of groundwater-storage change by using microgravity methods. Prior to the completion of the All-American Canal in 1940, groundwater in the study area flowed from east to west, and groundwater was recharged primarily by underflow from the Colorado River Valley. After construction of the All-American Canal, groundwater elevations were altered in the study area as seepage of Colorado River water from the All-American Canal and other canals became the dominant recharge source. By 2005, groundwater elevations had increased by as much as 50–70 feet along the All-American Canal. Superimposed on the east-to-west groundwater gradient was groundwater movement away from the All-American Canal to the north and, most likely, to the south into Mexico. After lining the All-American Canal, from 2007 to 2010, groundwater elevations declined as seepage from the All-American Canal decreased. Between 2005 (the last complete groundwater-elevation survey prior to lining the All-American Canal) and 2011, groundwater elevations declined 20–40 feet along the All-American Canal and as much as 40–45 feet in the vicinity of Lower Colorado Water Supply Project pumping wells. Water-quality and isotope data were used to differentiate historically recharged groundwater from groundwater more recently recharged by seepage of Colorado River surface water from the All-American Canal. Prior to the completion of the All-American Canal in 1940, groundwater in the southern part of the study area was primarily sodium-chloride/sulfate type water that had relatively low total dissolved solids concentrations (500–820 milligrams per liter). During 2007–11, groundwater in the southern part of the study area, near the All-American Canal, ranged from sodium-chloride type water to mixed-cation-sulfate type water that had total dissolved solids concentrations generally less than 879 milligrams per liter. The stable-isotopic signature of groundwater near the All-American Canal sampled in 2009–11 indicated inputs of Colorado River water that had been affected by evaporation, and radioactive isotopes indicated that a substantial fraction of water had been recharged recently, within the past 60 years. This contrasted with historically recharged groundwater near the All-American Canal, which had higher sodium and chloride concentrations, and lower calcium and sulfate concentrations, than recent recharge from the All-American Canal. Groundwater at a distance from the All-American Canal, in the East Mesa, Algodones Dunes, Pilot Knob Mesa, and Cargo Muchacho Mountains piedmont, was found to have higher total dissolved solids concentrations (generally greater than 1,000 milligrams per liter) than recently recharged groundwater near the All-American Canal. Time-domain electromagnetic data indicated that low-salinity groundwater was present down to about 377 feet below land surface near the All-American Canal; groundwater salinity at depth increased with distance north from the All-American Canal. Groundwater several miles or more from the canal also did not contain tritium and had a residence time on the order of thousands to tens of thousands of years. The groundwater in the piedmont of the Cargo Muchacho Mountains had a distinctly light stable-isotopic signature indicative of recharge by runoff from local precipitation, whereas the stable isotopic signature of groundwater in the East Mesa and the Algodones Dunes indicated a mixture of local precipitation and historic Colorado River recharge sources. During and after lining the All-American Canal (2007–11), groundwater elevations in the Lower Colorado Water Supply Project area declined, while total dissolved solids concentrations remained relatively constant. The total dissolved solids concentrations in well LCWSP-2 ranged from 650 to 800 milligrams per liter during this study. Depth-specific water-quality and isotope sampling at well LCWSP-2 indicated the groundwater pumped from the deeper part of the screened interval (240–280 feet below land surface) contained a greater proportion of historical groundwater than the groundwater pumped from the shallower part of the screened interval (350–385 feet below land surface). Age-tracer data at well LCWSP-2 indicated that all depths of the screened interval had received recent recharge from seepage of Colorado River water from the All-American Canal.

California↗

USGS1982

Evaulation of remote sensing, geological and geophysical data for south-central New York and northern Pennsylvania

A study was made of the relationship between lineaments observed on Landsat satellite images and the geologic framework of a portion of the Allegheny Plateau of south-central New York and northern Pennsylvania. The area is underlain by a relatively thick sequence of salt and other evaporites in the Silurian Salina Group and is a potential site for deep-storage of solid nuclear waste. A combination of remote sensing techniques, detailed geologic mapping and geophysical investigations were applied to the problem. Because of the premature termination of the Department of Energy contract, only a portion of the total work was completed. The completed portion of the project included 1) digital contrast enhancement of several Landsat multispectral scanner (MSS) images, 2) analysis of lineament patterns from a Landsat MSS-7 mosaic, 3) field mapping of bedrock joint patterns, 4) compilation and analysis of surface and subsurface structure and isopach maps, 5) collection and digital analysis of aeromagnetic data for southern New York, 6) compilation and analysis of aeromagnetic and gravity data for much of New York and Pennsylvania, and 7) analysis of seismic reflection survey lines for selected portions of New York and Pennsylvania. We identified eight major lineaments or lineament zones and studied them in detail. They typically represent linear alignments of the most conspicuous or prominent physiographic features observable on Landsat images. The Cortland-Ithaca, Watkins Glen-Tanghannock, Seneca Lake-Elmira, Painted Post-Blossburg and Endicott-Syracuse conspicuous lineaments include the Corning-Bath, Van Etten-Towanda, Van Etten-Candor and Van Etten-Odessa lineaments. In addition, a major fault system--the West Danby fault zone--was further defined by geologic and geophysical investigations during our study; the fault zone was not recognizable on satellite images. The lineaments and lineament zones were categorized by their azimuthal trends. Those with a northerly orientation (e.g. Van Etten-Towanda, Seneca Lake-Elmira, Painted Post-Blossburg and Endicott-Syracuse) are most common. Northeasterly lineaments (e.g. Cortland-Ithaca and Watkins Glen-Taughannock) also are common. The Corning-Bath and Van Etten-Odessa lineaments have a northwesterly orientation and the Van Etten-Candor lineament is the sole representative of the east-west direction. The West Danby fault system also trends east-west. All the lineaments or lineament zones studied appear to be related, in one fashion or another, to structural disturbances, because changes in the structural attitude of beds or thickness of rocks commonly occur along their extent. The changes in many instances occur on multiple stratigraphic horizons and in a manner suggestive of several different styles of tectonism, leading to the conclusion that the lineaments and lineament zones have been periodically reactivated during the Paleozoic and Mesozoic Eras. Aeromagnetic data commonly show a parallel alignment of contours juxtaposed or on line with lineaments and lineament zones, suggesting that these physiographic alignments owe their origin to features within the crystalline basement. Pre-Alleghanian faulting and depositional patterns show that the study area was affected by basement-controlled adjustments along and in the same direction as most of the lineaments and lineament zones. Actual displacements cannot be proven for all of the lineaments or lineament zones, but changes in dip of the rocks across these features suggest either basement hingelines or small displacement faulting which cannot be resolved by the present data. These displacements occurred in at least Middle-Late Ordovician, Middle-Late Silurian and the Early-Middle Devonian times. The major northeast trending lineament zones (Cortland-Ithaca and Watkins Glen-Taughannock) correspond in orientation and lie along the northeastward projection of the Rome Trough, a postulated Paleozoic aulacogen. Results of

Open-File Report↗

USGS2017

Brackish groundwater in the United States

For some parts of the Nation, large-scale development of groundwater has caused decreases in the amount of groundwater that is present in aquifer storage and that discharges to surface-water bodies. Water supply in some areas, particularly in arid and semiarid regions, is not adequate to meet demand, and severe drought is affecting large parts of the United States. Future water demand is projected to heighten the current stress on groundwater resources. This combination of factors has led to concerns about the availability of freshwater to meet domestic, agricultural, industrial, mining, and environmental needs. To ensure the water security of the Nation, currently [2016] untapped water sources may need to be developed. Brackish groundwater is an unconventional water source that may offer a partial solution to current and future water demands. In support of the national census of water resources, the U.S. Geological Survey completed the national brackish groundwater assessment to better understand the occurrence and characteristics of brackish groundwater in the United States as a potential water resource. Analyses completed as part of this assessment relied on previously collected data from multiple sources; no new data were collected. Compiled data included readily available information about groundwater chemistry, horizontal and vertical extents and hydrogeologic characteristics of principal aquifers (regionally extensive aquifers or aquifer systems that have the potential to be used as a source of potable water), and groundwater use. Although these data were obtained from a wide variety of sources, the compiled data are biased toward shallow and fresh groundwater resources; data representing groundwater that is at great depths and is saline were not as readily available. One of the most important contributions of this assessment is the creation of a database containing chemical characteristics and aquifer information for the known areas with brackish groundwater in the United States. Previously published digital data relating to brackish groundwater resources were limited to a small number of State- and regional-level studies. Data sources for this assessment ranged from single publications to large datasets and from local studies to national assessments. Geochemical data included concentrations of dissolved solids, major ions, trace elements, nutrients, and radionuclides as well as physical properties of the water (pH, temperature, and specific conductance). Additionally, the database provides selected well information (location, yield, depth, and contributing aquifer) necessary for evaluating the water resource. The assessment was divided into national-, regional-, and aquifer-scale analyses. National-scale analyses included evaluation of the three-dimensional distribution of observed dissolved-solids concentrations in groundwater, the three-dimensional probability of brackish groundwater occurrence, and the geochemical characteristics of saline (greater than or equal to 1,000 mg/L of dissolved solids) groundwater resources. Regional-scale analyses included a summary of the percentage of observed grid cell volume in the region that was occupied by brackish groundwater within the mixture of air, water, and rock for multiple depth intervals. Aquifer-scale analyses focused primarily on four regions that contained the largest amounts of observed brackish groundwater and included a generalized description of hydrogeologic characteristics from previously published work; the distribution of dissolved-solids concentrations; considerations for developing brackish groundwater resources, including a summary of other chemical characteristics that may limit the use of brackish groundwater and the ability of sampled wells producing brackish groundwater to yield useful amounts of water; and the amount of saline groundwater being used in 2010.

Professional Paper↗

USGS2018

Geohydrology, geochemistry, and numerical simulation of groundwater flow and land subsidence in the Bicycle Basin, Fort Irwin National Training Center, California

Groundwater pumping from Bicycle Groundwater Basin (referred to as Bicycle Basin) in the Fort Irwin National Training Center, California, began in 1967. From 1967 to December 2010, about 46,000 acre-feet of water had been pumped from the basin and transported to the Irwin Basin. During this time, not only did water levels in the basin decline by as much as 100 feet, the quality of the groundwater pumped from the basin also deteriorated in some wells. The U.S. Geological Survey collected geohydrologic data from existing wells, test holes, and 16 additional monitoring wells installed at 6 sites in Bicycle Basin during 1992–2011 to determine the quantity and quality of groundwater available in the basin. Geophysical surveys, including electrical, gravity, and seismic refraction surveys, were completed to help determine the geometry of the structural basin, delineate depths to the interface between Quaternary and Tertiary rocks, map the depth to the water table, and used to develop a geohydrologic framework and groundwater-flow model for Bicycle Basin. Water samples were used to determine the groundwater quality in the basin and to delineate potential sources of poor-quality groundwater. Analysis of stable isotopes of oxygen and hydrogen in groundwater indicated that presentday precipitation is not a major source of recharge to the basin. Tritium and carbon-14 data indicated that most of the groundwater in the basin was recharged prior to 1952 and had an apparent age of 15,625–39,350 years. Natural recharge to the basin was not sufficient to replenish the groundwater pumped from the basin. Interferograms from synthetic aperture radar data (InSAR), analyzed to evaluate land-surface subsidence between 1993 and 2010, showed 0.23 to 1.1 feet of subsidence during this period near one production well north of Bicycle Lake (dry) playa. A groundwater-flow model of Bicycle Basin was developed and calibrated using groundwater levels for 1964– 2010, and a subsidence model using land-surface deformation data for 1993–2010. Between January 1967 and December 2010, the simulated total recharge from precipitation runoff and underflow from adjacent basins was about 5,100 acre-feet and pumpage from the Bicycle Basin was about 47,000 acrefeet of water. Total outflows exceeded natural recharge during this period, resulting in a net loss of about 42,100 acre-feet of groundwater storage in the basin. The Fort Irwin National Training Center is considering various groundwater-management options in the Bicycle Basin. The groundwater-flow model was used to (1) evaluate changes in groundwater levels and subsidence with the addition of capture and recharge of simulated runoff in retention basins (scenario 1) for predevelopment through 2010; (2) simulate a base case (scenario 2) for reference; and (3) compare projections of alternative future pumping strategies for 2011–60 (scenarios 3–5). Model results from the runoff-capture simulation (scenario 1) indicated that total recharge, including runoff captured using retention basins, locally increased water levels, which partially offset, but did not mitigate, groundwater depletion associated with pumping. Groundwater-storage depletion in scenario 1 was about 14 percent less than without runoff capture. Simulated-drawdown results in model layer 1 in the eastern part of the basin indicated that, because of the captured runoff, simulated heads were as much as 100 feet higher in December 2010 than prior to the onset of development in 1967. In contrast, simulated drawdown for model without runoff capture indicated that, without captured runoff, simulated heads for December 2010 in this area were 80–90 feet lower than during the predevelopment period. Subsidence was mitigated slightly in scenario 1 compared to without runoff capture; the largest decrease in subsidence at observation sites was about 0.07 feet.

California↗

USGS2005

Pre- and post-reservoir ground-water conditions and assessment of artificial recharge at Sand Hollow, Washington County, Utah, 1995-2005

Sand Hollow, Utah, is the site of a surface-water reservoir completed in March 2002, which is being operated by the Washington County Water Conservancy District primarily as an aquifer storage and recovery project. The reservoir is an off-channel facility receiving water from the Virgin River, diverted near the town of Virgin, Utah. It is being operated conjunctively, providing both surface-water storage and artificial recharge to the underlying Navajo aquifer. The U.S. Geological Survey and the Bureau of Reclamation conducted a study to document baseline ground-water conditions at Sand Hollow prior to the operation of the reservoir and to evaluate changes in ground-water conditions caused by the reservoir. Pre-reservoir age dating using tritium/helium, chlorofluorocarbons, and carbon-14 shows that shallow ground water in the Navajo Sandstone in some areas of Sand Hollow entered the aquifer from 2 to 25 years before sample collection. Ground water in low-recharge areas and deeper within the aquifer may have entered the aquifer more than 8,000 years ago. Ground-water levels in the immediate vicinity of Sand Hollow Reservoir have risen by as much as 80 feet since initial filling began in March 2002. In 2005, ground water was moving laterally away from the reservoir in all directions, whereas the pre-reservoir direction of ground-water flow was predominantly toward the north. Tracers, or attributes, of artificial recharge include higher specific conductance, higher dissolved-solids concentrations, higher chloride-to-bromide ratios, more-depleted stable isotopes ( 2 H and 18 O), and higher total-dissolved gas pressures. These tracers have been detected at observation and production wells close to the reservoir. About 15,000 tons of naturally occurring salts that previously accumulated in the vadose zone beneath the reservoir are being flushed into the aquifer. Except for the shallowest parts of the aquifer, this is generally not affecting water quality, largely because of the large saturated thickness of the Navajo aquifer. Since the initial filling of Sand Hollow Reservoir, arsenic concentrations have risen to exceed U.S. Environmental Protection Agency standards only in some shallow observation wells. These increases in arsenic concentration are likely caused by increasing pH associated with artificial recharge beneath the reservoir, rather than flushing of previously accumulated salts in the vadose zone. There has been no trend of increasing arsenic concentration in deeper production wells. Estimated evaporation rates for Sand Hollow Reservoir, calculated by the Jensen-Haise method with data from the Sand Hollow weather station, range from about 55 to 61 inches per year and result in a total evaporative loss of about 6,000 acre-feet of water from March 2002 to September 2004. Rates of artificial recharge of ground water beneath Sand Hollow Reservoir have ranged from about 0.02 to 0.44 feet per day, with an average rate excluding the initial 3-month wetting period of about 0.06 feet per day. A total of about 28,000 acre-feet of recharge to the underlying Navajo aquifer occurred from March 2002 to September 2004.

Utah↗

USGS2007

Preliminary Earthquake Hazard Map of Afghanistan

Introduction Earthquakes represent a serious threat to the people and institutions of Afghanistan. As part of a United States Agency for International Development (USAID) effort to assess the resource potential and seismic hazards of Afghanistan, the Seismic Hazard Mapping group of the United States Geological Survey (USGS) has prepared a series of probabilistic seismic hazard maps that help quantify the expected frequency and strength of ground shaking nationwide. To construct the maps, we do a complete hazard analysis for each of ~35,000 sites in the study area. We use a probabilistic methodology that accounts for all potential seismic sources and their rates of earthquake activity, and we incorporate modeling uncertainty by using logic trees for source and ground-motion parameters. See the Appendix for an explanation of probabilistic seismic hazard analysis and discussion of seismic risk. Afghanistan occupies a southward-projecting, relatively stable promontory of the Eurasian tectonic plate (Ambraseys and Bilham, 2003; Wheeler and others, 2005). Active plate boundaries, however, surround Afghanistan on the west, south, and east. To the west, the Arabian plate moves northward relative to Eurasia at about 3 cm/yr. The active plate boundary trends northwestward through the Zagros region of southwestern Iran. Deformation is accommodated throughout the territory of Iran; major structures include several north-south-trending, right-lateral strike-slip fault systems in the east and, farther to the north, a series of east-west-trending reverse- and strike-slip faults. This deformation apparently does not cross the border into relatively stable western Afghanistan. In the east, the Indian plate moves northward relative to Eurasia at a rate of about 4 cm/yr. A broad, transpressional plate-boundary zone extends into eastern Afghanistan, trending southwestward from the Hindu Kush in northeast Afghanistan, through Kabul, and along the Afghanistan-Pakistan border. Deformation here is expressed as a belt of major, north-northeast-trending, left-lateral strike-slip faults and abundant seismicity. The seismicity intensifies farther to the northeast and includes a prominent zone of deep earthquakes associated with northward subduction of the Indian plate beneath Eurasia that extends beneath the Hindu Kush and Pamirs Mountains. Production of the seismic hazard maps is challenging because the geological and seismological data required to produce a seismic hazard model are limited. The data that are available for this project include historical seismicity and poorly constrained slip rates on only a few of the many active faults in the country. Much of the hazard is derived from a new catalog of historical earthquakes: from 1964 to the present, with magnitude equal to or greater than about 4.5, and with depth between 0 and 250 kilometers. We also include four specific faults in the model: the Chaman fault with an assigned slip rate of 10 mm/yr, the Central Badakhshan fault with an assigned slip rate of 12 mm/yr, the Darvaz fault with an assigned slip rate of 7 mm/yr, and the Hari Rud fault with an assigned slip rate of 2 mm/yr. For these faults and for shallow seismicity less than 50 km deep, we incorporate published ground-motion estimates from tectonically active regions of western North America, Europe, and the Middle East. Ground-motion estimates for deeper seismicity are derived from data in subduction environments. We apply estimates derived for tectonic regions where subduction is the main tectonic process for intermediate-depth seismicity between 50- and 250-km depth. Within the framework of these limitations, we have developed a preliminary probabilistic seismic-hazard assessment of Afghanistan, the type of analysis that underpins the seismic components of modern building codes in the United States. The assessment includes maps of estimated peak ground-acceleration (PGA), 0.2-second spectral acceleration (SA), and 1.0-secon

Open-File Report↗

USGS2021

Status and understanding of groundwater quality in the northern Sierra Nevada foothills domestic-supply aquifer study units, 2015–17—California GAMA Priority Basin Project

Groundwater quality in the northern Sierra Nevada foothills region of California was investigated as part of California State Water Resources Control Board (SWRCB) Groundwater Ambient Monitoring Assessment Priority Basin Project (GAMA-PBP). The region was divided into two study units: the Yuba-Bear watersheds (YBW) study unit and the American-Cosumnes-Mokelumne watersheds (ACMW) study unit. The GAMA-PBP made a spatially unbiased assessment of aquifer systems used for domestic drinking-water supply in the study region, which are predominantly composed of fractured, hard-rock aquifers of varying lithology. These assessments characterized the quality of raw groundwater to evaluate ambient conditions in the domestic-supply aquifer and not the quality of treated drinking water. The study included three components: (1) a status assessment , which characterized the quality of groundwater resources used for domestic drinking-water supply in the YBW and ACMW study units; (2) an understanding assessment , which evaluated natural and anthropogenic explanatory factors that could potentially affect groundwater quality in the study region; and (3) a comparative assessment between the groundwater resources used for domestic and public drinking-water supply in the study region. The status assessment was based on data collected by the GAMA-PBP from 74 sites in the YBW study unit during 2015–16 and 67 sites in the ACMW study unit from 2016 to 2017. To contextualize water-quality results, concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. The status assessment used a grid-based method to estimate proportions of groundwater resources with concentrations approaching or exceeding benchmark thresholds. This method provides spatially unbiased results and allows inter-comparability with similar groundwater-quality assessments. Inorganic constituents with health-based benchmarks were present at high relative concentration (RC), meaning they exceeded the benchmark threshold, in 5.4 and 10 percent of domestic-supply aquifer systems in the YBW and ACMW study units, respectively. Inorganic constituents with aesthetic-based benchmarks were detected at high-RCs in 20 and 28 percent of the YBW and ACMW study units, respectively. The inorganic constituents present at high RC were arsenic, barium, boron, molybdenum, strontium, nitrate, adjusted gross-alpha particle activity, chloride, total dissolved solids, specific conductance, iron, manganese, and hardness. Groundwater samples were tested for presence or absence of three microbial indicators (total coliform, Escherichia coli , and Enterococci ). At least one microbial indicator was present in 26 and 28 percent of the YBW and ACMW study units, respectively. At least one organic constituent was detected in 30 and 42 percent of the YBW and ACMW study units, respectively. Organic constituents were not present at high RC, but tetrachloroethene (PCE), trichloroethene (TCE), and toluene were detected in the YBW study unit at moderate RC (between the benchmark concentration and one-tenth of the benchmark concentration). Methyl tert -butyl ether (MTBE) and chloroform were present at low RC (less than one-tenth of the benchmark concentration) in the YBW and ACMW study units with detection frequencies greater than 10 percent. Perchlorate, a constituent of special interest, was detected in 31 and 41 percent of the YBW and ACMW study units, respectively, at either low or moderate RCs. Relations among select water-quality constituents and potential explanatory factors were evaluated using statistical and graphical approaches. Nitrate, microbial indicators, and perchlorate were all correlated to elevation-dependent variables relating to climate, land use, and recharge condition. Isotopic and dissolved noble-gas tracers indicated these water-quality constituents are associated with recharge conditions associated with irrigation during the summer dry-season, which is common in areas of rural-residential or agricultural land uses. Higher concentrations of iron and manganese were primarily associated with anoxic groundwater in aquifers of metasedimentary lithology. Increased hardness was primarily associated with anoxic groundwater in aquifers of mafic-ultramafic or metavolcanics lithologies at lower elevations in the study region in the Melones fault zone. Chloroform and MTBE were associated with shallow groundwater (wells depths less than 130 m) under oxic and anoxic redox conditions, respectively. The comparative assessment evaluated differences between the aquifer systems used for domestic- and public-supply in study region based on (1) well-construction characteristics, and (2) water quality. Analysis of over 60,000 well-completion reports in the study region showed that although domestic-supply wells span the deepest depth zones in regional aquifers, median depths for public-supply wells were significantly greater than those of domestic-supply wells in both study units. Water-quality data from more than 300 public-supply wells in the study region were assessed using a spatially weighted method for calculation aquifer-scale proportions and compared with the domestic-supply assessment results. Detections of inorganic constituents at high RC and detection frequencies for organic constituents were generally similar between the domestic- and public-supply aquifer systems in both study units, with a few notable exceptions in the ACMW study unit: nitrate was greater for the public- compared to domestic-supply aquifer system and both manganese, hardness, and MTBE were greater in the domestic- compared to public-supply aquifer system. These differences are likely related to contrasting land uses, aquifer lithologies, landscape positions, and depths characterizing domestic- and public-supply wells in the ACMW study unit. Overall, fewer samples from domestic-supply wells in the northern Sierra Nevada foothills exceeded health-based benchmarks compared to aesthetic-based benchmarks for groundwater quality. Exceedences of health-based benchmarks were primarily caused by nitrate and coliform bacteria, which were associated with recharge from diverted surface water used primarily for irrigation. Exceedences of aesthetic-based benchmarks were primarily caused by iron, managanese, and hardness, which were associated with geologic factors. Regional irrigation practices and aquifer lithology can affect groundwater quality in fractured-rock aquifers in the northern Sierra Nevada foothills used for domestic drinking-water supply.

California↗

USGS1993

The Pajarito Plateau: A bibliography

This bibliography is the result of two initially independent projects. As the consulting archaeologist at Los Alamos National Laboratory (LANL), Charlie R. Steen collected entries at the suggestion of the staff of the Environmental Surveillance Group of the Health, Safety, and Environmental Division, HSE-8. The primary purpose was to aid the staff in evaluating cultural resources on LANL lands. In addition to works that related to the archaeology and history of the area, Steen included notations of a few books and articles in other fields such as geology and natural history. It was hoped that they also would be of value to other organizations and to students of past human activities on the Pajarito Plateau. At the same time, the National Park Service (NPS) was planning a major survey of Bandelier National Monument (BNM). As part of this plan, the author was asked to prepare a background document that described research previously carried out in the area, including an annotated bibliography. Although the survey would be limited to the park boundaries, the larger Pajarito Plateau is a more logical study area from physiographic, environmental, and cultural perspectives; hence the focus was on this larger region. Mathien (1986) also included some references to natural resources studies, particularly those initiated by NPS within Bandelier National Monument. Both bibliographies were made available to Colleen Olinger and Beverly Larson of the Health and Environmental Services Group at Los Alamos. They realized that while neither was complete, each included entries missing from the other. Larson suggested the two bibliographies be combined. (At this time, Craig Allen was studying the landscape of the Jemez Mountains [Allen 1984c, 1989]. His investigations included much detailed information on natural resource studies and were added in 1991 and 1992.) To limit the scope of their work, Steen and Mathien had chosen their parameter: the Pajarito Plateau. Geographically, the Pajarito Plateau is described as the high tableland that lies between the Jemez Mountains on the west and the Rio Grande on the east. From north to south, it extends from the Chama Valley to La Cañada de Cochiti (Hewett 1906:14)(Figure 1). Because human activity rarely stops at such definite boundaries, major ethnographic studies of Tewa (San Ildefonso and Santa Clara) and Keres (Cochiti) linguistic groups are included. (Even though most of the historic pueblos occupied by the Tewa and Keres are not located on the Pajarito Plateau, oral traditions and archaeological data suggest that these groups once occupied sites on the plateau.) Towa studies are not included because Steen believed Towa ancestors were not involved in major cultural developments of the Pajarito Plateau. In addition, a bibliography of the Jemez area (home of Towa people) has been prepared by Michael Elliott (1982) and included with his nomination of large Pueblo sites near Jemez Springs to the National Register of Historic Places that is on file at the Museum of New Mexico, Laboratory of Anthropology, in Santa Fe. Both Steen and Mathien included references to geographically and historically related material that does not focus on the Pajarito Plateau but, nonetheless, is important to understanding the area's archaeology and physical environment, for example, lithic resources available from Cerro Pedernal or in the Sangre de Cristo Mountains.

New Mexico↗

USGS2003

Water and sediment quality of the Lake Andes and Choteau Creek basins, South Dakota, 1983-2000

The Bureau of Reclamation has proposed construction of the Lake Andes/Wagner Irrigation Demonstration Project to investigate environmental effects of irrigation of glacial till soils substantially derived from marine shales. During 1983-2000, the U.S. Geological Survey collected hydrologic, water-quality, and sediment data in the Lake Andes and Choteau Creek Basins, and on the Missouri River upstream and downstream from Choteau Creek, to provide baseline information in support of the proposed demonstration project. Lake Andes has a drainage area of about 230 mi2 (square miles). Tributaries to Lake Andes are ephemeral. Water-level fluctuations in Lake Andes can be large, and the lake has been completely dry on several occasions. The outlet aqueduct from Lake Andes feeds into Garden Creek, which enters Lake Francis Case just upstream from Fort Randall Dam on the Missouri River. For Lake Andes tributary stations, calcium, magnesium, and sodium are approximately codominant among the cations, and sulfate is the dominant anion. Dissolved-solids concentrations typically range from about 1,000 mg/L (milligrams per liter) to about 1,700 mg/L. Major-ion concentrations for Lake Andes tend to be higher than the tributaries and generally increase downstream in Lake Andes. Proportions of major ions are similar among the different lake units (with the exception of Owens Bay), with calcium, magnesium, and sodium being approximately codominant among cations, and sulfate being the dominant anion. Owens Bay is characterized by a calcium sulfate water type. Dissolved-solids concentrations for Lake Andes typically range from about 1,400 to 2,000 mg/L. Whole-water nitrogen and phosphorus concentrations are similar among the Lake Andes tributaries, with median whole-water nitrogen concentrations ranging from about 1.6 to 2.4 mg/L, and median whole-water phosphorus concentrations ranging from about 0.5 to 0.7 mg/L. Whole-water nitrogen concentrations in Lake Andes are similar among the different units, with medians that range from about 2.4 to 4.0 mg/L. Median whole-water phosphorus concentrations for the different Lake Andes units range from 0.2 to 0.5 mg/L, and decrease downstream through Lake Andes. Median selenium concentrations are substantially lower for Andes Creek (3 ?g/L (micrograms per liter)) than for the other tributary stations (34, 18, and 7 ?g/L). Median selenium concentrations for the lake stations (ranging from less than 1 to 2 ?g/L) are substantially lower than tributary stations. The pesticides 2,4-D and atrazine were the most commonly detected pesticides in Lake Andes. Median concentrations for 2,4-D for Lake Andes range from 0.07 to 0.11 ?g/L; the median concentration for Owens Bay is 0.04 ?g/L. Median concentrations for atrazine for Lake Andes range from 0.2 to 0.4 ?g/L; the median concentration for Owens Bay is less than 0.1 ?g/L. Concentrations of both 2,4-D and atrazine are largest for the most upstream part of Lake Andes that is most influenced by tributary inflow. Median suspended-sediment concentrations for Lake Andes tributaries range from 22 to 56 mg/L. Most of the suspended sediment transported in the Lake Andes tributaries consists of particles less than 63 ?m (micrometers) in diameter. Concentrations of most constituents in bottom sediments generally had similar ranges and medians for the Lake Andes tributaries. However, Andes Creek generally had lower concentrations of several metals. For Lake Andes, medians and ranges for most constituents generally were similar among the different units. However, selenium concentrations tended to be higher in the upstream part of the lake, and generally decreased downstream. Results of vertical sediment cores collected from a single site in the South Unit of Lake Andes in October 2000 indicate that selenium loading to Lake Andes increased during the period 1952 through 2000. Choteau Creek has a drainage area of 619 mi2. In the upstream part of the basin, Chotea

Water-Resources Investigations Report↗

USGS2019

Using environmental DNA (eDNA) to assess the presence of cavefish and cave crayfish populations in caves of the Ozark Highlands

Many cavefishes and cave crayfishes are considered of conservation concern; however, sampling these species is inherently difficult given their occupied environments. The goal of our project was to verify the presence of select karst organisms while developing the foundation for sampling approaches that might be useful to conservation and management agencies. Our project objectives were to develop assays to amplify deoxyribonucleic acid (DNA) from several species of Ozark cavefishes and cave crayfishes and complete an initial surveillance of locations across the Ozark Highlands using environmental DNA (eDNA). Using DNA either provided by agency cooperators or that we extracted from tissue samples, we PCR amplified and then sequenced the Cytochrome Oxidase 1 (CO1) gene for cave crayfishes and the NADH Dehydrogenase Subunit 2 (ND2) gene for cavefishes. We developed species-specific primers and probes for five cave crayfishes and two cavefishes. From February 2017 to May 2017, we sampled 1–5 sampling units from 42 caves, wells, and springs (i.e., sites) using eDNA and traditional visual surveys. We measured physicochemical parameters at each sampling unit to estimate detection probability associated with both techniques. We also calculated two occupancy covariates for each site using geospatial data. We successfully amplified Troglichthys rosae DNA from the environment and detected DNA representing this species at 24 of 40 sites. At 16 of the sites where we detected T. rosae DNA, we did not visually observe the species. Although our assay for Typlichthys eigenmanni successfully amplified the target DNA from the environment, it also resulted in false absences where the species was visually confirmed. Using eDNA to detect cave crayfishes was much more difficult. The assay for Cambarus subterraneus did not work for eDNA samples and we were unable to pick up DNA from the environment, even at locations where it was visually confirmed. Alternatively, the eDNA surveys worked well for C. tartarus and we were able to amplify DNA at every site where it was visually observed. Our assay for C. aculabrum was based on a single sample obtained from GenBank, and did not amplify eDNA from field samples. Lastly, our eDNA results from samples in the known range of Orconectes stygocaneyi suggested the species may be found at an additional cave. Detection using eDNA based on our O. stygocaneyi assay was likely low because it was designed from a pseudogene; however, positive eDNA samples were sequenced to confirm species-specific DNA. Detection probability of both cavefishes and cave crayfishes varied by survey technique and was influenced by water volume, water clarity, water velocity, and substrate. Detection of cavefishes and cave crayfishes via visual surveys decreased when water volume increased, whereas detection using eDNA increased with greater water volume. Detection between taxa using either sample method was highest in habitats classified by fine substrates, except for eDNA detection of crayfishes which was greatest in coarse substrates. Detection of cavefishes increased with water clarity, but detection of cave crayfishes increased with turbidity. Detection probability of both cavefishes and crayfishes using eDNA increased slightly with water velocity, but decreased with visual surveys as water velocity increased. Occupancy by both taxa was positively related to particular geologic series. Crayfish occupancy was negatively related to fine-scale anthropogenic disturbance (i.e., 500-m buffer around the site), whereas crayfish showed no relationship with disturbance. Our results suggest possible range extensions, provide insights to factors driving detection using both sample techniques, and suggest areas where recharge zones may be shared among caves. Future efforts focused on a comprehensive evaluation of genetic diversity among cave crayfishes to improve assay design could improve detection and the applicability of eDNA as a supplemental and non-invasive sampling approach.

Cooperator Science Series↗

USGS2016

Accuracy assessment/validation methodology and results of 2010–11 land-cover/land-use data for Pools 13, 26, La Grange, and Open River South, Upper Mississippi River System

Introduction/Background The U.S. Geological Survey (USGS)-Upper Midwest Environmental Sciences Center (UMESC) was responsible for development of several land cover/land use (LCU) systemic datasets of the Upper Mississippi River System (UMRS). These efforts (1989 and 2000) were funded by the U.S. Army Corps of Engineers’ Upper Mississippi River Restoration Program (UMRR) Long Term Resource Monitoring (LTRM) element. Development of systemic datasets includes the acquisition, processing, and serving of high-resolution aerial photography and land cover/land use spatial datasets ( http://www.umesc.usgs.gov/data_library/land_cover_use/land_cover_use_data.html ). In 2008, the UMRR reached a collaborative agreement with the U.S. Fish and Wildlife Service-Region 3 to collect high-resolution digital imagery of the entire UMRS floodplain during 2010–11 for LTRM. The UMESC helped acquire, process, and serve this imagery, as well as produce and serve the 2010–11 LCU systemic dataset of the UMRS floodplain. Digital imagery for Pools 13, 26, La Grange, and Open River South was collected using an Applanix DSS 439 digital sensor system with a 40 millimeter lens and Color Infrared (CIR) filter. The imagery was collected at a resolution of 20 centimeters/pixel (8 inches/pixel) for Pool 13 and 40 centimeters/pixel (16 inches/pixel) for Pools 26, Open River South, and La Grange. All imagery was projected to Universal Transverse Mercator (UTM) Zone 15, North American Datum of 1983 (NAD 83). The General Wetland Vegetation Classification (GWVC) system used for mapping is hierarchical, and its 31 classes can be collapsed into broader categories using either a 15- or 7-class level. While the 1989 and 2000 LCU systemic datasets have not gone through a traditional thematic accuracy assessment (AA) in the past, nor have they undergone a validation analysis, the end products are of high quality. For each systemic dataset produced (1989, 2000, 2010–11), extensive field reconnaissance is performed before photointerpretation. The intent of this field reconnaissance is to learn, test, and verify image signatures as they relate to vegetation types. Questionable areas on the imagery are visited, and the plants or land features observed in the area are recorded for reference. This procedure verifies vegetation signatures on the imagery with those on the ground. In addition, once the photointerpretation is complete, the final LCU dataset undergoes extensive quality assurance/quality control to ensure the imagery is mapped correctly. Since the 2000 LCU systemic dataset was developed, there has been a growing interest in completing thematic AAs for the LTRM LCU spatial datasets. The objective of an AA is to measure the probability that a particular location has been assigned its correct vegetation class. An AA estimates thematic (map class) errors in the data, giving users information needed to determine data suitability for a particular application. At the same time, data producers are able to learn more about the nature of errors in the data. Thus, the two attributes of an AA are “producers’ accuracy,” which is the probability that an AA point has been mapped correctly (also referred to as an error of omission); and “users’ accuracy,” which is the probability that the map actually represents what was found on the ground (also referred to as error of commission). Producers’ and users’ accuracies can be obtained from the same set of data by using different analyses. Accuracy assessment is an extensive effort that requires seasonal field personnel and equipment, data entry, analyses, and post processing—tasks that are costly and time consuming. The geospatial team at the UMESC has suggested a validation process for understanding the accuracy of the spatial datasets, which will be tested on at least some areas of the UMRS. Validation is not a true verification of map-class type in the field; however, it can provide the user of the map with useful information that is similar to a field AA. Similar to an AA, validation involves generating random points based on the total area for each map class. However, instead of collecting field data, two or three individuals not involved with the photo-interpretative mapping separately review each of the points onscreen and record a best-fit vegetation type(s) for each site. Once the individual analyses are complete, results are joined together and a comparative analysis is performed. The objective of this initial analysis is to identify areas where the validation results were in agreement (matches) and areas where validation results were in disagreement (mismatches). The two or three individuals then perform an analysis, looking at each mismatched site, and agree upon a final validation class. (If two vegetation types at a specific site appear to be equally prevalent, the validation team is permitted to assign the site two best-fit vegetation types.) Following the validation team’s comparative analysis of vegetation assignments, the data are entered into a database and compared to the mappers’ vegetation assignments. Agreements and disagreements between the map and validation classes are identified, and a contingency table is produced. This document presents the AA processes/results for Pools 13 and La Grange, as well as the validation process/results for Pools 13 and 26 and Open River South.

Iowa, Illinois, Minnesota, Missouri, Wisconsin↗

USGS2016

Assessment of undiscovered hydrocarbon resources of sub-Saharan Africa

Introduction The main objective of the U.S. Geological Survey’s (USGS) National and Global Petroleum Assessment Project is to assess the potential for undiscovered, technically recoverable oil and natural gas resources of the United States and the world (U.S. Geological Survey World Conventional Resources Assessment Team, 2012). The USGS updated assessments that were completed during the USGS World Petroleum Assessment 2000 (U.S. Geological Survey World Energy Assessment Team, 2000) and conducted new assessments in areas around the world that were not previously examined (U.S. Geological Survey World Conventional Resources Assessment Team, 2012). These assessments used the latest geology-based assessment methodology for conventional oil and gas resources. The new assessments are available at the USGS website, ( http://energy.usgs.gov/OilGas/AssessmentsData/WorldPetroleumAssessment.aspx ) . As part of this project, the USGS assessed 13 geologic provinces located in sub-Saharan Africa (U.S. Geological Survey World Conventional Resources Assessment Team, 2012). Coastal provinces were extended offshore to water depths ranging from 2,000 to 4,000 meters (m). Within these 13 geologic provinces 18 assessment units (figs. 1, 2) were identified. The west Africa provinces are (1) the Senegal, containing the passive-margin Senegal Basin of Middle Jurassic to Holocene age; (2) the West African Coastal, characterized by rift, passive-margin, and transform tectonics; (3) the Gulf of Guinea, characterized by transform tectonics; (4) the Niger Delta, containing more than 9,100 m of sedimentary rock and recent sediments; (5) the West-Central Coastal, which contains the Aptian salt basin, is dominated by both rift and sag tectonics, and includes the Congo Basin; and (6) the Orange River Coastal, containing more than 7,000 m of syn-rift and post-rift sedimentary rock. The West African Coastal Province was assessed for the first time, whereas the other five west Africa provinces were reassessed for the 2012 World Oil and Wandrey Gas Resource Assessment (fig. 1 of U.S. Geological Survey World Conventional Resources Assessment Team, 2012). More than 275 new oil and gas fields have been discovered in the six west Africa provinces (IHS Energy, 2008, 2009) since the USGS World Petroleum Assessment in 2000 (U.S. Geological Survey World Energy Assessment Team, 2000). These provinces were assessed because of increased energy exploration activity and new oil and gas discoveries within the provinces. Seven provinces not assessed as part of the World Petroleum Assessment 2000 (U.S. Geological Survey World Energy Assessment Team, 2000) were assessed by the USGS as part of the World Assessment 2012 (U.S. Geological Survey World Conventional Resources Assessment Team, 2012). These provinces are (1) the Chad Province, containing Cretaceous and Cenozoic-age lacustrine, continental, and minor marine rocks; (2) the Sud Province, containing Cretaceous and Paleogene age lacustrine, continental, and minor marine rocks; (3) the South Africa Coastal Province, which contains rift, transform, and passive-margin rocks; (4) the Mozambique Coastal Province, containing rift, drift, and passive-margin rocks; (5) the Morondava Province, which contains failed rift, drift, and passive-margin rocks; (6) the Tanzania Coastal Province, containing rift, drift, and passive-margin rocks; and (7) the Seychelles Province, which contains rift and drift rocks. At the time of this assessment 157 oil and gas fields had been discovered in the seven provinces (IHS Energy, 2009). These provinces were assessed because of increased interest and new oil and gas discoveries within the provinces. The assessment was geology-based and used the total petroleum system (TPS) concept. The geologic elements of a TPS are hydrocarbon source rocks (source rock maturation and hydrocarbon generation and migration), reservoir rocks (quality and distribution), and traps where hydrocarbon accumulates. Using these geologic criteria, 16 conventional total petroleum systems and 18 assessment units in the 13 provinces were defined. The undiscovered, technically recoverable oil and gas resources were assessed for all assessment units.

Data Series↗

USGS2006

Geology, ground-water hydrology, geochemistry, and ground-water simulation of the Beaumont and Banning Storage Units, San Gorgonio Pass area, Riverside County, California

Ground water has been the only source of potable water supply for residential, industrial, and agricultural users in the Beaumont and Banning storage units of the San Gorgonio Pass area, Riverside County, California. Ground-water levels in the Beaumont area have declined as much as 100 feet between the early 1920s and early 2000s, and numerous natural springs have stopped flowing. In 1961, the San Gorgonio Pass Water Agency (SGPWA) entered into a contract with the California State Department of Water Resources to receive 17,300 acre-feet per year of water to be delivered by the California State Water Project (SWP) to supplement natural recharge. Currently (2005), a pipeline is delivering SWP water into the area, and the SGPWA is artificially recharging the ground-water system using recharge ponds located along Little San Gorgonio Creek in Cherry Valley with the SWP water. In addition to artificial recharge, SGPWA is considering the direct delivery of SWP water for the irrigation of local golf courses and for agricultural supply in lieu of ground-water pumpage. To better understand the potential hydrologic effects of different water-management alternatives on ground-water levels and movement in the Beaumont and Banning storage units, existing geohydrologic and geochemical data were compiled, new data from a basin-wide ground-water level and water-quality monitoring network were collected, monitoring wells were installed near the Little San Gorgonio Creek recharge ponds, geohydrologic and geochemical analyses were completed, and a ground-water flow simulation model was developed. The San Gorgonio Pass area was divided into several storage units on the basis of mapped or inferred faults. This study addresses primarily the Beaumont and Banning storage units. The geologic units in the study area were generalized into crystalline basement rocks and sedimentary deposits. The younger sedimentary deposits and the surficial deposits are the main water-bearing deposits in the San Gorgonio Pass area. The water-bearing deposits were divided into three aquifers: (1) the perched aquifer, (2) the upper aquifer, and (3) the lower aquifer based on lithologic and downhole geophysical logs. Natural recharge in the San Gorgonio Pass area was estimated using INFILv3, a deterministic distributed- parameter precipitation-runoff model. The INFILv3 model simulated that the potential recharge of precipitation and runoff in the Beaumont and Banning storage units was about 3,710 acre-feet per year and that the potential recharge in 28 sub-drainage basins upstream of the storage units was about 6,180 acre-feet per year. The water supply for the Beaumont and Banning storage units is supplied by pumping ground water from wells in the Canyon (Edgar and Banning Canyons), Banning Bench, Beaumont, and Banning storage units. Total annual pumpage from the Beaumont and Banning storage units ranged from about 1,630 acre-feet in 1936 to about 20,000 acre-feet in 2003. Ground-water levels declined by as much as 100 feet in the Beaumont storage unit from 1926-2003 in response to ground-water pumping of about 450,160 acre-feet during this period. Since ground-water development began in the San Gorgonio Pass area, there have been several sources of artificial recharge to the basin including return flow from applied water on crops, golf courses, and landscape; septic-tank seepage; and infiltration of storm runoff diversions and imported water into recharge ponds. Return flow from applied water and septic-tank seepage was estimated to reach a maximum of about 8,100 acre-feet per year in 2003. Owing to the great depth of water in much of study area (in excess of 150 feet), the return flow and septic-tank seepage takes years to decades to reach the water table. Stable-isotope data indicate that the source of ground-water recharge was precipitation from storms passing through the San Gorgonio Pass as opposed to runoff from the higher altitudes of the San Bernar

Scientific Investigations Report↗

USGS2014

Simulation of groundwater flow in the Edwards-Trinity and related aquifers in the Pecos County region, Texas

The Edwards-Trinity aquifer is a vital groundwater resource for agricultural, industrial, and public supply uses in the Pecos County region of western Texas. The U.S. Geological Survey completed a comprehensive, integrated analysis of available hydrogeologic data to develop a numerical groundwater-flow model of the Edwards-Trinity and related aquifers in the study area in parts of Brewster, Jeff Davis, Pecos, and Reeves Counties. The active model area covers about 3,400 square miles of the Pecos County region of Texas west of the Pecos River, and its boundaries were defined to include the saturated areas of the Edwards-Trinity aquifer. The model is a five-layer representation of the Pecos Valley, Edwards-Trinity, Dockum, and Rustler aquifers. The Pecos Valley aquifer is referred to as the alluvial layer, and the Edwards-Trinity aquifer is divided into layers representing the Edwards part of the Edwards-Trinity aquifer and the Trinity part of the Edwards-Trinity aquifer, respectively. The calibration period of the simulation extends from 1940 to 2010. Simulated hydraulic heads generally were in good agreement with observed values; 1,684 out of 2,860 (59 percent) of the simulated values were within 25 feet of the observed value. The average root mean square error value of hydraulic head for the Edwards-Trinity aquifer was 34.2 feet, which was approximately 4 percent of the average total observed change in groundwater-level altitude (groundwater level). Simulated spring flow representing Comanche Springs exhibits a pattern similar to observed spring flow. Independent geochemical modeling corroborates results of simulated groundwater flow that indicates groundwater in the Edwards-Trinity aquifer in the Leon-Belding and Fort Stockton areas is a mixture of recharge from the Barilla and Davis Mountains and groundwater that has upwelled from the Rustler aquifer. The model was used to simulate groundwater-level altitudes resulting from prolonged pumping to evaluate sustainability of current and projected water-use demands. Each of three scenarios utilized a continuation of the calibrated model. Scenario 1 extended recent (2008) irrigation and nonirrigation pumping values for a 30-year period from 2010 to 2040. Projected groundwater-level changes in and around the Fort Stockton area under scenario 1 change little from current conditions, indicating that the groundwater system is near equilibrium with respect to recent (2008) pumping stress. Projected groundwater-level declines in the eastern part of the model area ranging from 5.0 to 15.0 feet are likely the result of nonequilibrium conditions associated with recent increases in pumping after a prolonged water-level recovery period of little or no pumping. Projected groundwater-level declines (from 15.0 to 31.0 feet) occurred in localized areas by the end of scenario 1 in the Leon-Belding area. Scenario 2 evaluated the effects of extended recent (2008) pumping rates as assigned in scenario 1 with year-round maximum permitted pumping rates in the Belding area. Results of scenario 2 are similar in water-level decline and extent as those of scenario 1. The extent of the projected groundwater-level decline in the range from 5.0 to 15.0 feet in the Leon-Belding irrigation area expanded slightly (about a 2-percent increase) from that of scenario 1. Maximum projected groundwater-level declines in the Leon-Belding irrigation area were approximately 31.3 feet in small isolated areas. Scenario 3 evaluated the effects of periodic increases in pumping rates over the 30-year extended period. Results of scenario 3 are similar to those of scenario 2 in terms of the areas of groundwater-level decline; however, the maximum projected groundwater-level decline increased to approximately 34.5 feet in the Leon-Belding area, and the extent of the decline was larger in area (about a 17-percent increase) than that of scenario 2. Additionally, the area of projected groundwater-level declines in the eastern part of the model area increased from that of scenario 2—two individual areas of decline coalesced into one larger area. The localized nature of the projected groundwater-level declines is a reflection of the high degree of fractured control on storage and hydraulic conductivity in the Edwards-Trinity aquifer. Additionally, the finding that simulated spring flow is highly dependent on the transient nature of hydraulic heads in the underlying aquifer indicates the importance of adequately understanding and characterizing the entire groundwater system.

Texas↗

USGS1964

Hydrogeology of northwestern Nassau and northeastern Queens Counties, Long Island, New York

A detailed investigation of the geology and ground-water occurrence in northwestern Nassau and northeastern Queens Counties, N.Y., has been completed by the U.S. Geological Survey, in cooperation with the Nassau County Department of Public Works and the New York State Water Resources Commission. The area, about 63 square miles, includes the peninsulas of Great Neck and Manhasset Neck and the western part of Nassau County as far south as Garden City. Unconsolidated sediments of Pleistocene and Cretaceous aged 200 to 800 feet thick, constitute the ground-water reservoir of the area. The reservoir includes three discrete aquifers, not all found in the same locality, which transect geologic boundaries. The shallow unconfined aquifer consists of those permeable Pleistocene and Cretaceous deposits that lie within the upper part of the zone of saturation, which extends from slightly below sea level to more than 110 feet above sea level. It is an abundant source of water in much of the area, particularly in the southern part, where the aquifer consists of coarse sand and gravel in a glacial-outwash plain. The intermediate or principal aquifer consists largely of that part of the Magothy(?) formation that occurs from about 50 feet below sea level downward to the top of the clay member of the Raritan formation. Locally, however, the aquifer includes Pleistocene deposits which blanket the Magothy(?) formation or lie in channels cut into it. Although the principal aquifer has limited extent to the north, it is the chief source of water in most of the area, except the peninsulas. The lower or deep confined aquifer is found beneath the entire project area, and consists of the Lloyd sand member of the Raritan formation and the hydraulically contiguous Jameco gravel. The lower limit of the aquifer is the bedrock surface; its upper limit is defined by the overlying clay member of the Raritan formation and the Gardiners clay, the latter abutting against the clay member on the north or, in some valleys and embankments, lying directly upon the clay member. Thus, hydraulic continuity exists between the Lloyd sand member of the Raritan formation (Cretaceous) and the Jameco gravel (Pleistocene) in the northern part of Manhasset and Great Necks. The two contiguous clay bodies overlying the aquifer, the clay member of the Raritan formation and the Gardiners clay, form an effective confining bed which probably extends beyond the shore lines of the project area. The deep confined aquifer is particularly important on Manhasset and Great Necks where locally it is the only source of water available for large public-supply or industrial needs. In general, ground-water supplies in sufficient quantity and of excellent quality can be obtained from the three aquifers underlying northwestern Nassau and northeastern Queens Counties, N.Y. Ground-water withdrawals for public supply have increased with population growth and expanded use from an average of about 10 millions of gallons per day in 1940 to 30 mgd in 1957. In addition, about 10 mgd are pumped for various industrial, institutional and private uses. Much of the water pumped by industry is returned to the ground by diffusion wells and recharge basins. However, an increasing amount of water is lost from the ground-water reservoir due to the expanding network of server systems discharging directly to the sea. In the Manhasset Neck and Great Neck areas, ground-water resources are approaching full development in terms of the total available supply, if such development has not been reached already (1959). The chief limiting factor to further expansion lies in the geometry of the aquifers and the reduced thickness of permeable saturated sediments. In the northern part of both peninsulas, the ground-water reservoir is only about 200 to 400 feet thick, and, locally, as much as 75 percent of the strata in the reservoir consists of rather impermeable silt and clay of the Raritan formation or the Gardiners clay. I

Water Supply Paper↗