USGS Science⌕ Search

SEARCH · USGS Science

Results for “Natural Resource Modelling”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

Mapping, monitoring, and modeling Western Gateway Community landscape dynamics

Federal public lands in the western United States are becoming increasingly surrounded by Gateway Communities. These communities are undergoing landscape change due to population growth, economic growth, and the resulting land-use development. Socioeconomic, demographic, and land-use changes in Gateway Communities are often perceived as threats to Federal land resources, natural amenities, cultural resources, and recreational opportunities. However, land-surface disturbances on Federal public lands, such as conventional and alternative energy development (which impact surrounding Gateway Communities), are also environmental and societal issues that Federal land and adjacent regional community planners need to consider in their long-range land-use planning.

Fact Sheet↗

Reactive solute transport in streams: 2. Simulation of a pH modification experiment

We present an application of an equilibrium-based solute transport model to a p H-modification experiment conducted on the Snake River, an acidic, metal-rich stream located in the Rocky Mountains of Colorado. During the experiment, instream p H decreased from 4.2 to 3.2, causing a marked increase in dissolved iron concentrations. Model application requires specification of several parameters that are estimated using tracer techniques, mass balance calculations, and geochemical data. Two basic questions are addressed through model application: (1) What are the processes responsible for the observed increase in dissolved iron concentrations? (2) Can the identified processes be represented within the equilibrium-based transport model? Simulation results indicate that the increase in iron was due to the dissolution of hydrous iron oxides and the photoreduction of ferric iron. Dissolution from the streambed is represented by considering a trace compartment consisting of freshly precipitated hydrous iron oxide and an abundant compartment consisting of aged precipitates that are less soluble. Spatial variability in the solubility of hydrous iron oxide is attributed to heterogeneity in the streambed sediments, temperature effects, and/or variability in the effects of photoreduction. Solubility products estimated via simulation fall within a narrow range ( pK sp from 40.2 to 40.8) relative to the 6 order of magnitude variation reported for laboratory experiments ( pK sp from 37.3 to 43.3). Results also support the use of an equilibrium-based transport model as the predominate features of the iron and p H profiles are reproduced. The model provides a valuable tool for quantifying the nature and extent of p H-dependent processes within the context of hydrologic transport.

Water Resources Research↗

Statistical assessment on a combined analysis of GRYN-ROMN-UCBN upland vegetation vital signs

As of 2013, Rocky Mountain and Upper Columbia Basin Inventory and Monitoring Networks have multiple years of vegetation data and Greater Yellowstone Network has three years of vegetation data and monitoring is ongoing in all three networks. Our primary objective is to assess whether a combined analysis of these data aimed at exploring correlations with climate and weather data is feasible. We summarize the core survey design elements across protocols and point out the major statistical challenges for a combined analysis at present. The dissimilarity in response designs between ROMN and UCBN-GRYN network protocols presents a statistical challenge that has not been resolved yet. However, the UCBN and GRYN data are compatible as they implement a similar response design; therefore, a combined analysis is feasible and will be pursued in future. When data collected by different networks are combined, the survey design describing the merged dataset is (likely) a complex survey design. A complex survey design is the result of combining datasets from different sampling designs. A complex survey design is characterized by unequal probability sampling, varying stratification, and clustering (see Lohr 2010 Chapter 7 for general overview). Statistical analysis of complex survey data requires modifications to standard methods, one of which is to include survey design weights within a statistical model. We focus on this issue for a combined analysis of upland vegetation from these networks, leaving other topics for future research. We conduct a simulation study on the possible effects of equal versus unequal probability selection of points on parameter estimates of temporal trend using available packages within the R statistical computing package. We find that, as written, using lmer or lm for trend detection in a continuous response and clm and clmm for visually estimated cover classes with “raw” GRTS design weights specified for the weight argument leads to substantially different results and/or computational instability. However, when only fixed effects are of interest, the survey package (svyglm and svyolr) may be suitable for a model-assisted analysis for trend. We provide possible directions for future research into combined analysis for ordinal and continuous vital sign indictors.

Natural Resource Report↗

Sediment data collected in 2014 and 2015 from around Breton and Gosier Islands, Breton National Wildlife Refuge, Louisiana

Breton Island, located at the southern end of the Chandeleur Islands, supports one of Louisiana’s largest historical brown pelican ( Pelecanus occidentalis ) nesting colonies. Although the brown pelican was delisted as an endangered species in 2009, nesting areas are threatened by continued land loss and are extremely vulnerable to storm impacts. The U.S. Fish and Wildlife Service proposed to restore Breton Island to pre-Hurricane Katrina conditions through rebuilding the shoreface, dune, and back-barrier marsh environments. Prior to restoration, scientists from the U.S. Geological Survey’s (USGS) St. Petersburg Coastal and Marine Science Center Geologic and Morphologic Evolution of Coastal Margins project collected high-resolution geophysical (topography, bathymetry, and sub-bottom profiles) and sedimentologic data from around Breton Island to characterize the geologic framework of the island platform, nearshore, and shelf environments. These data will be used to characterize the geologic framework around Breton Island, identify potential borrow areas for restoration efforts, quantify seafloor change, and provide information for sediment transport and morphologic change models to assess island response to restoration and natural processes. This report, along with the accompanying USGS data release, serves as an archive of sediment data from vibracores, push cores, and submerged grab samples collected from around Breton and Gosier Islands, Louisiana, during two surveys conducted in July 2014 and January 2015 (USGS Field Activity Numbers 2014–314–FA and 2014–336–FA, respectively). Sedimentologic and stratigraphic metrics (for example, sediment texture or unit thicknesses) derived from these data can be used to ground-truth the geophysical data and characterize potential sand resources or can be incorporated into sediment transport or morphologic change models. Data products, including sample location tables, descriptive core logs, core photographs and x-radiographs, results of sediment grain-size analyses, and geographic information system data files with accompanying formal Federal Geographic Data Committee metadata can be downloaded from the accompanying data release.

Louisiana↗

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗

Quaternary vegetation and climate change in the western United States: Developments, perspectives, and prospects

This chapter explores the strengths and shortcomings of the major sources of data on Quaternary vegetation and climate change and discusses the use of models as a means to explore past and potential future environmental changes. The flora and major vegetation types of the western United States are present for several million years. Ongoing changes in atmospheric chemistry , climate, and human activities may lead to major vegetation changes over the coming decades to centuries. The combination of observations from the paleoenvironmental record, modern ecological studies, and modeling now permit assessments of the magnitude of potential future changes in the context of natural variability. They also provide opportunities for hypothesis testing and identification of the processes driving past changes in vegetation and climate. Understanding the dynamics of paleoenvironmental change can contribute to current conservation and natural resource management efforts and will help conservation and natural resource managers anticipate the potential rate, magnitude, and complexity of future vegetation change.

western United States↗

The 3D Elevation Program—Supporting Minnesota's economy

Introduction In Minnesota, high-quality elevation data are essential for agriculture and precision farming, natural resources conservation, flood risk management, infrastructure and construction management, water supply and quality, coastal zone management, and many other business uses. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features.

Minnesota↗

Effects of Proposed Additional Ground-Water Withdrawals from the Mississippi River Valley Alluvial Aquifer on Water Levels in Lonoke County, Arkansas

The Grand Prairie Water Users Association, located in Lonoke County, Arkansas, plans to increase ground-water withdrawals from the Mississippi River Valley alluvial aquifer from their current (2005) rate of about 400 gallons per minute to 1,400 gallons per minute (2,016,000 gallons per day). The effect of pumping from a proposed well was simulated using a digital model of ground-water flow. The proposed additional withdrawals were added to an existing pumping cell specified in the model, with increased pumping beginning in 2005, and specified to pump at a total combined rate of 2,016,000 gallons per day for a period of 46 years. In addition, pumping from wells owned by Cabot Water Works, located about 2 miles from the proposed pumping, was added to the model beginning in 2001 and continuing through to the end of 2049. Simulated pumping causes a cone of depression to occur in the alluvial aquifer with a maximum decline in water level of about 8.5 feet in 46 years in the model cell of the proposed well compared to 1998 withdrawals. However, three new dry model cells occur south of the withdrawal well after 46 years. This total water-level decline takes into account the cumulative effect of all wells pumping in the vicinity, although the specified pumping rate from all other model cells in 2005 is less than for actual conditions in 2005. After 46 years with the additional pumping, the water-level altitude in the pumped model cell was about 177.4 feet, which is 41.7 feet higher than 135.7 feet, the altitude corresponding to half of the original saturated thickness of the alluvial aquifer (a metric used to determine if the aquifer should be designated as a Critical Ground-Water Area (Arkansas Natural Resources Commission, 2006)).

Scientific Investigations Report↗

UAV-based estimate of snow cover dynamics: Optimizing semi-arid forest structure for snow persistence

Seasonal snow cover in the dry forests of the American West provides essential water resources to both human and natural systems. The structure of trees and their arrangement across the landscape are important drivers of snow cover distribution across these forests, varying widely in both space and time. We used unmanned aerial vehicle (UAV) multispectral imagery and Structure-from-Motion (SfM) models to quantify rapidly melting snow cover dynamics and examine the effects of forest structure shading on persistent snow cover in a recently thinned ponderosa pine forest. Using repeat UAV multispectral imagery (n = 11 dates) across the 76 ha forest, we first developed a rapid and effective method for identifying persistent snow cover with 90.2% overall accuracy. The SfM model correctly identified 98% (n = 1280) of the trees, when compared with terrestrial laser scanner validation data. Using the SfM-derived forest structure variables, we then found that canopy shading associated with the vertical and horizontal metrics was a significant driver of persistent snow cover patches ( R 2 = 0.70). The results indicate that UAV image-derived forest structure metrics can be used to accurately predict snow patch size and persistence. Our results provide insight into the importance of forest structure, specifically canopy shading, in the amount and distribution of persistent seasonal snow cover in a typical dry forest environment. An operational understanding of forest structure effects on snow cover will help drive forest management that can target snow cover dynamics in addition to forest health.

Arizona↗

National Assessment of Oil and Gas Project: geologic assessment of undiscovered gas hydrate resources on the North Slope, Alaska

Scientists with the U.S. Geological Survey have completed the first assessment of the undiscovered, technically recoverable gas hydrate resources beneath the North Slope of Alaska. This assessment indicates the existence of technically recoverable gas hydrate resources—that is, resources that can be discovered, developed, and produced using current technology. The approach used in this assessment followed standard geology-based USGS methodologies developed to assess conventional oil and gas resources. In order to use the USGS conventional assessment approach on gas hydrate resources, three-dimensional industry-acquired seismic data were analyzed. The analyses indicated that the gas hydrates on the North Slope occupy limited, discrete volumes of rock bounded by faults and downdip water contacts. This assessment approach also assumes that the resource can be produced by existing conventional technology, on the basis of limited field testing and numerical production models of gas hydrate-bearing reservoirs. The area assessed in northern Alaska extends from the National Petroleum Reserve in Alaska on the west through the Arctic National Wildlife Refuge on the east and from the Brooks Range northward to the State-Federal offshore boundary (located 3 miles north of the coastline). This area consists mostly of Federal, State, and Native lands covering 55,894 square miles. Using the standard geology-based assessment methodology, the USGS estimated that the total undiscovered technically recoverable natural-gas resources in gas hydrates in northern Alaska range between 25.2 and 157.8 trillion cubic feet, representing 95 percent and 5 percent probabilities of greater than these amounts, respectively, with a mean estimate of 85.4 trillion cubic feet.

Alaska↗

Adaptive management framework and decision support tool for invasive annual bromes in seven Northern Great Plains National Park Service units

National Park Service (NPS) units in the northern Great Plains (NGP) were established to preserve and interpret the history of the United States, protect and showcase unusual geology and paleontology, and provide a home for vanishing large wildlife. A unifying feature among these national parks, monuments, and historic sites is northern mixed-grass prairie, which not only provides background scenery and habitat but is the foundation of many park missions. As recognition of the prairie’s importance to park fundamental resources and values has grown, so too has the realization that invasive plants threaten these values by reducing native species diversity, altering food webs, and marring the visitor experience. Cheatgrass ( Bromus tectorum ) and Japanese brome ( Bromus japonicus )—collectively referred to as “annual bromes”—are of particular concern because of their documented increase through time, and their association with lower native plant diversity, in NGP parks. A variety of grazing, herbicide-application, and prescribed-fire experiments have shown promising short-term results for controlling annual bromes in research-scale plots in the NGP, but it is unclear whether these management actions will be as effective at the larger spatial and longer temporal scales relevant to park management. When uncertainties about the effectiveness of different management actions cannot be answered with traditional research approaches in time to prevent resource degradation, yet recurrent management decisions must be made, an adaptive management approach may be appropriate. Thus, in 2017, we began to develop the ABAM—Annual Brome Adaptive Management—framework. The aim of this framework is to reduce uncertainties about methods for controlling annual bromes in seven NGP parks through a formal process of learning from the application of on-going management. A uniform framework across seven parks provides greater opportunities for reducing these uncertainties compared to a single park acting alone or to multiple parks using different adaptive management frameworks. This technical report details the development and expected implementation of the ABAM framework. After briefly introducing the issue (Section 1) and describing the context in which the framework was developed (Section 2), the report describes how a structured decision-making process was used to frame the problem, determine concrete objectives, and decide the alternative actions for achieving those objectives that the framework would be designed around (Section 3). Then the report describes the process used to develop the ABAM decision support system (Section 4). At the core of this system is the ABAM decision support tool, a Bayesian decision network built on nearly two decades of vegetation monitoring data from NGP parks, as well as current literature and ABAMspecific experiments. This tool, referred to as the ABAM model by its intended users, is built to work with the existing vegetation monitoring, prescribed fire, and invasive plant management programs that support the seven ABAM parks. In Section 5, the report describes how output from the ABAM model is produced and used in annual vegetation management decision making. It describes the ABAM R package (Baldwin et al. 2021) and an example R script that leads a user through an annual workflow using the model and the package. This workflow updates the model with information from new monitoring events following management actions of prescribed fire, herbicide application, or a combination thereof. With the updated model, data describing the current condition of vegetation in park management units, and current data for environmental factors included in the model (soil texture, slope, weather, and grazing), the user then runs the model to predict future vegetation conditions—and managers’ happiness with the outcome—in response to each of 10 management actions for each management unit in each park. These predictions inform managers’ decisions regarding locations and types of management actions to apply in the upcoming year. The ABAM framework is in its infancy, and the report concludes (Section 6) with a discussion of its longer-term viability. Successful adaptive management requires commitment for the long term, likely decades. Currently, the predictions of the decision support tool are not expected to be highly accurate, but they ideally will improve over time as more management actions are applied and their outcomes are captured by monitoring. We designed the ABAM decision support tool to work with the existing management and monitoring resources in ABAM parks to maximize the sustainability of the model’s use, but the ABAM framework requires more than the model. Because this application of an adaptive management framework supported by a quantitative decision support tool to guide vegetation management is unique within the NPS (to our knowledge), institutional knowledge and mechanisms for long-term implementation of the ABAM framework do not exist within the agency. Additionally, the ABAM model and the data that inform it could be improved in a variety of ways. Thus, this report concludes with a discussion of ways to both sustain and improve upon the work completed so far.

Montana, Nebraska, South Dakota, Wyoming↗

Mass collecting and the diet breadth model: A Great Basin example

The energetic return rates of many small animal and plant resources are often density dependent. When these resources are collected in mass, change in abundance can dramatically affect diet rank, and challenges the assumption that return rates are generally correlated with body size. When mass collecting is employed, as a result of either natural events (e.g. windrows) or technological developments (e.g. nets), population density may largely determine the overall return rate for a resource. Since a single food or resource type can be many prey types, an increase in the abundance of a food resource can change its diet rank. We examined this relationship at Lakeside Cave in northwestern Utah, and discovered that when the abundance of grasshoppers is high, and mass collecting is productive, the hunting of bighorn sheep and other large animal resources may have been abandoned, contradicting commonly held assumptions about prey size. In archaeological situations it may be necessary to determine what foraging technique was used before assuming that the presence of small animals and fish in the diet is a result of reduced foraging efficiency.

Journal of Archaeological Science↗

Chapter 3: Changes to the Wyoming Basins landscape from oil and natural gas development

Oil and natural gas have been produced in Wyoming since the late 1800s although the rate of extraction has increased substantially in the last two decades. Well pads, roads, and infrastructure built to support resource development alter native vegetation configuration; however, the rate and effect of land cover change resulting from oil and gas extraction has not been quantified across the region. We used a Geographic Information System (GIS) to model development through time and assess change to native vegetation at two spatial extents (field and subbasin) within the Wyoming portion of the Wyoming Basins Ecoregional Assessment (WBEA) area. Since 1900, a minimum of 1,703 km 2 of native vegetation in the WBEA area has been replaced by well pads or roads. Shrublands were, and continue to be, the dominant land cover class and the cover type most affected by oil and gas extraction. Average shrubland patch size has decreased by approximately 10% at the subbasin extent in the WBEA. Core area (≥60 m from edge) size declined by 13% as road development fragmented formerly continuous patches. To date, the majority of land cover change has occurred in formally identified oil and gas fields, which cover about 1% of the WBEA in Wyoming. Approximately 7.5% of shrubland within oil and gas fields has been converted to well pad or a road supporting a well, and shrubland patch size has declined by 45%. Resource reserves, especially natural gas, have been identified outside traditional fields, and development will likely expand as resource development becomes more cost-effective. Revegetation guidelines are in place for development areas addressed by Environmental Impact Assessments although no quantitative data are available to assess how well restoration efforts are restoring landscapes and connecting fragments.

Wyoming↗

Evaluation of artificial cover units as a sampling technique and habitat enhancement for madtoms in rivers

Instream habitat degradation and loss are major threats to freshwater fishes and critical conservation issues among nongame species, due to a lack of research and knowledge concerning their habitat requirements. Instream physical cover is an important component of fish habitat, especially for benthic species that require cover for reproduction and shelter from predators. One such species is the Carolina Madtom Noturus furiosus, a small, imperiled, nongame catfish endemic to the Neuse and Tar river basins of North Carolina. To enhance understanding of instream cover dynamics, we constructed artificial cover units from terra cotta materials and deployed them in rivers to (1) evaluate if they could be an effective passive sampling technique to estimate detection and occupancy of the Carolina Madtom, and (2) determine their potential to enhance habitat in systems where instream cover has been lost. Artificial cover units were deployed at 8 sites in the Neuse and Tar river basins, and collected 30 Carolina Madtoms at 2 sites in the Tar River basin. Occupancy modeling estimated Carolina Madtom detection probability using artificial cover units at 0.92. Compared to other standardized sampling methods, artificial cover units were an efficient, passive sampling technique for detecting Carolina Madtoms. Observations also revealed that artificial cover units were occupied by Carolina Madtoms for reproduction. These findings provide natural resource managers an additional means to assess the status of this imperiled species using an inexpensive, passive sampling device that can provide spawning habitat, protection from predators, and help mitigate effects of instream habitat degradation.

North Carolina↗

Climate, Fire and Geology in the Convergence of Mediterranean-type Climate Ecosystems

Integrating Climate, Fire and Geology in a Fire-prone World Fire challenges the long-standing hegemony of ecology, biogeography and paleoecology that climate and soils are sufficient to explain the origin and distribution of plant species. In a world where half of the land surface is fire-prone (Krawchuk et al . 2009), understanding the past and predicting the future requires a close integration of climate, fire and geology. The dogma that fire is an anthropogenic phenomenon of little use in understanding paleoecology (Axelrod 1980, 1989), or merely incidental to vegetation development (Hopper 2009), is rapidly being replaced with a better understanding of paleofire's impact on land plant evolution (Scott 2000; Pausas & Keeley 2009). Attempts to model future global vegetation patterns have been demonstrated to be inadequate without including both natural and anthropogenic fire regimes (Bond et al . 2005). Bond and Keeley (2005) outlined the conundrum posed by alternative explanations for the present distribution of vegetation and assembly of communities. Classical explanations have invoked resource-based mechanisms that are driven by climate and soils. There are ecosystems where resource-based mechanisms may be sufficient, but on many seasonally dry landscapes ecosystem processes such as fire play a major role in the organization and evolution of vegetation.

Book chapter↗

Fort Collins Science Center

The U.S. Geological Survey's Fort Collins Science Center (FORT) is one of 17 USGS biological science centers nationwide. FORT conducts research and develops technical applications to assist land managers in understanding and managing biological resources, habitats, and ecosystems. Although the majority of FORT's activities are conducted within the 15-state Central Region of the USGS, many FORT projects are national or international in scope. FORT serves all Department of the Interior land management bureaus and other natural resource agencies. In addition, FORT scientists partner with DOI and other federal entities such as CDC, DOE, EPA, NASA, NIH, and USDA to share expertise and resources. FORT also partners with several universities and works cooperatively with states and nongovernmental organizations. Products and services include reports and publications, predictive models and software, maps and GIS products, and other technical assistance in the form of meetings, workshops, training, field visits, and needs assessments.

Fact Sheet↗

Urban hydrology—Science capabilities of the U.S. Geological Survey

Urbanization affects streamflow characteristics, coastal flooding, and groundwater recharge. Increasing impervious areas, streamflow diversions, and groundwater pumpage are some of the ways that the natural water cycle is affected by urbanization. Assessment of the relations among these factors and changes in land use helps water-resource managers with issues such as stormwater management and vulnerability to flood and drought. Scientists with the U.S. Geological Survey (USGS) have the expertise to monitor and model urban hydrologic systems. Streamflow and groundwater data are available in national databases, and analyses of these data, including identification of long-term streamflow trends and the efficacy of management practices, are published in USGS reports.

Fact Sheet↗

The 3D Elevation Program—Supporting the Kansas Economy

Introduction High-resolution elevation data for Kansas inform decision making to improve the State’s economy. Existing elevation data coverage is used to support State water planning initiatives, facilitate infrastructure management, and improve resilience to natural disasters. The expanding availability of current and more accurate elevation data helps better support natural resources conservation, agriculture and precision farming, flood risk management, water supply planning, infrastructure and construction management, and geologic resource assessment and hazard mitigation. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Kansas. The status of available and in-progress 3DEP baseline lidar data in Kansas is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $14.41 million in new benefits annually to the State. The top nine Kansas business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Kansas↗