SEARCH · USGS Science

Results for “Natural Hazards and Earth Systems Sciences (NHESS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,667 records · Page 35Linked to original sources

USGS2025

Slow rupture, long rise times, and multi-fault geometry: The 2020 M6.4 southwestern Puerto Rico mainshock

The M 6.4 mainshock of the southwestern Puerto Rico seismic sequence on 7 January 2020, was one of the most impactful modern earthquakes in the northeastern Caribbean. Due to its offshore location and complex aftershock distribution, its source kinematics remain poorly constrained. This active sequence illuminated a complex set of previously unrecognized structures that indicate multiple causative faults may have slipped during its rupture. Here, we utilize seismic and geodetic observations to enhance model resolution, estimate the finite slip of the mainshock, and test a multi-segment, geologically realistic fault geometry. Our refined model finds a lower rupture velocity and longer rise times than typical for an event of this magnitude. This indicates a slow-evolving rupture process that resembles characteristics of a tsunami earthquake. Although this normal/strike-slip faulting event was not tsunamigenic, these qualities, if pervasive for this region, have important implications for future seismic monitoring and hazards in southwestern Puerto Rico.

Puerto Rico↗

USGS1996

Magnitude and frequency of low flows in the Suwannee River Water Management District, Florida

Low-flow frequency statistics for 20 gaging stations having at least 10 years of continuous record and 31 other stations having less than 10 years of continu ous record or a series of at least two low- flow measurements are presented for unregulated streams in the Suwannee River Water Management District in north-central Florida. Statistics for the 20 continuous-record stations included are the annual and monthly minimum consecutive-day average low- flow magnitudes for 1, 3, 7, 14, and 30 consecutive days for recurrence intervals of 2, 5, 10, 20, and, for some long-term stations, 50 years, based on records available through the 1994 climatic year.Only theannual statistics are given for the 31 other stations; these are for the 7- and 30-consecutive day periods only and for recurrence intervals of 2 and 10 years only. Annual low-flow frequency statistics range from zero for many small streams to 5,500 cubic feet per second for the annual 30- consecutive-day average flow with a recurrenceinterval of 2 years for the Suwannee River near Wilcox (station 02323500). Monthly low-flow frequency statistics range from zero for many small streams to 13,800 cubic feet per second for the minimum 30-consecutive-day average flow with a 2-year recurrence interval for the month of March for the same station. Generally, low-flow characteristics of streams in the Suwannee River Water Management District are controlled by climatic, topographic, and geologic fac tors. The carbonate Floridan aquifer system underlies, or is at the surface of, the entire District. The terrane's karstic nature results in many sinkholes and springs. In some places, springs may contribute greatly to low streamflow and the contributing areas of such springs may include areas outside the presumed surface drainage area of the springs. In other places, water may enter sinkholes within a drainage basin, then reappear in springs downstream from a gage. Many of the smaller streams in the District go dry or have no flow for several months in many years. In addition to the low-flow statistics, four synoptic low-flow measurement surveys were conducted on 161 sites during 1990, 1995, and 1996. The measurements were made to provide "snapshots" of flow conditions of streams throughout the Suwannee River Water Management District. Magnitudes of low flows during the 1990 series of measurements were in the range associated with minimum 7-consecutive-day 50-year recurrence interval to the minimum 7-consecutive-day 20-year recurrence interval, except in Taylor and Dixie Counties, where the magnitudes ranged from the minimum 7-consecutive-day 5-year flow level to the7-consecutive-day 2-year flow level. The magnitudes were all greater than the minimum 7- consecutive-day 2-year flow level during 1995 and 1996. Observations of no flow were recorded at many of the sites for all four series of measurements.

Florida↗

USGS2026

A deep dive into subduction zones and the Japan Trench

Deep beneath the ocean, giant slabs of rock slide beneath one another in areas called subduction zones. These powerful movements shape the planet by building mountains, creating fiery volcanoes, and even causing huge earthquakes. Scientists study subduction zones to understand why these natural events happen and where and how they might occur so we can be better prepared. One important subduction zone is the Japan Trench, where a big earthquake happened in 2011. To learn more about subduction zones, scientists go on ocean drilling expeditions. They sail on research ships, drill into the seafloor, and collect rock samples. These samples help scientists understand what happened in the past and how subduction zones work. In turn, this information helps communities better understand and prepare for future earthquakes.

Frontiers for Young Minds↗

USGS2024

Groundwater-Surface water interactions research: Past trends and future directions

Interactions between groundwater and surface water sustain groundwater-dependent ecosystems and regulate river temperature and biogeochemical cycles, amongst many other processes. These interactions occur in freshwater environments including rivers, springs, lakes, and wetlands, and in coastal environments via tidal pumping, submarine groundwater discharge, and seawater intrusion. Here, we explore groundwater-surface water interactions research using bibliometric analyses of titles, abstracts, and keywords from 20,275 journal papers published between 1970 and 2023 extracted from Scopus. Analyses show that research into groundwater-surface water interactions is highly multi-disciplinary, with growing contributions from the social and biological sciences. The number of groundwater-surface water interactions papers is rapidly increasing with over 1200 papers published per year since 2020. Drawing on our data-driven approach and expert knowledge, we synthesise current research trends and identify critical future research directions. Despite the thousands of papers on groundwater-surface water interactions, important processes are still difficult to quantify or predict at meaningful spatial scales to inform water-resources management. We see benefits in future groundwater-surface water interactions research focusing on: (1) using new technologies including internet-of-things-based sensors, uncrewed vehicles, and remote-sensing approaches for data collection to inform groundwater-surface water interactions at large scales, (2) seeking approaches to upscale site-specific findings to better inform management, and (3) continuing the movement towards multi-disciplinary investigations to better inform the understanding of groundwater-surface water interactions and processes that will enable better management outcomes.

Journal of Hydrology↗

USGS2026

Black rails in Baja California

Summarizing records from 1905 to 2025, we document the presence and distribution of the California black rail ( Laterallus jamaicensis coturniculus ) in northwestern México, particularly Baja California and the Colorado River Delta. This subspecies has a restricted distribution in the western U.S. and northwestern México. We found few records over the past century: sparse detections in the early 1900s and an increase in reported records after 2000. Over 120 years, we compiled 35 documented records of California black rail occurrence in Baja California with a minimum reported count of 56 rails. Our call-broadcast survey methods reconfirmed previously occupied sites and documented the species at a previously unreported site. Surveys in the Baja California portion of the Colorado River Delta yielded 20 detections across nine survey events between 2000 and 2022. In April 2003, standardized surveys detected 12 California black rails: 7 in Bahía de San Quintín, 3 in Arroyo San Telmo, and 2 in Arroyo El Rosario. Our recent survey work (2022–2025) recorded maximum monthly counts of 31 detections at Bahía de San Quintín and 15 detections at Estero de Punta Banda, the latter representing a previously undocumented location for the subspecies. These surveys also yielded the first photographic and acoustic documentation of California black rail in México. The contribution of spatial and temporal data provided by citizen science platforms increased our understanding of the subspecies’ distribution. Enforceable protection of this subspecies’ habitat is needed to safeguard its persistence.

Baja California↗

USGS2024

Oblique contraction along the fastest ocean-continent transform plate boundary focuses rock uplift west of the Fairweather fault, southeast Alaska

Contraction along the Yakutat–North America plate boundary drives 4.6–9.0 mm/year Holocene rock uplift rates along Earth's fastest slipping (≥49 mm/year) ocean–continent transform fault, the Fairweather Fault. Between Icy Point and Lituya Bay, the near-vertical Fairweather fault focuses rock uplift and rapid right-lateral slip by accommodating both vertical and fault-parallel strain during oblique-slip and separate, predominantly strike-slip ruptures. Unusually high uplift rates, indicated by radiocarbon and luminescence dating, result from a 10-km-wide, asymmetric, positive flower structure along a 20°, ∼30-km-long restraining double bend in the Fairweather fault. The principal reverse fault in the flower structure, the offshore, blind Icy Point–Lituya Bay fault, ruptures no more than every 460–1040 years evidenced by uplifted Holocene shorelines. Maximum 3–5 m coseismic uplifts imply 3.1–10 m dip slip per event and earthquake magnitudes of M w 7.0–7.5. The Yakutat block collides obliquely into North America, and our model entails oblique slip on the Fairweather fault with and without corupture on the reverse fault. Oblique slip is evident by vertically offset (>25 m) fluvial and marine terraces and by the primary Fairweather fault strand that strikes >20° to the west of plate-boundary motion.

Alaska↗

USGS2025

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2022

Potentiometric-surface and depth-to-water maps for spring 2022 were created for the Mississippi River Valley alluvial aquifer (MRVA) using groundwater-altitude data from 1,136 wells completed in the MRVA and from the altitude of the top of the water surface in area rivers from 160 streamgages. The potentiometric-surface and depth-to-water maps for 2022 were created to support investigations to characterize the MRVA as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the MRVA for spring 2022 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 340 feet (ft) above the North American Vertical Datum of 1988. The regional direction of groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient was into the depression, and near rivers, where the groundwater gradient can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in much of the Grand Prairie and Delta regions. Depth to water in the MRVA, spring 2022, by well ranged from 5.00 ft above land surface to 145.66 ft below land surface.

Mississippi River Valley alluvial aquifer↗

USGS2025

Benthic habitat map of Olowalu Reef, Maui, Hawaii—Geomorphological structure, biological cover, and geologic zonation determined with spectral, lidar, and acoustic data

The fringing coral reef off Olowalu, Maui, Hawaii, has been identified as a local conservation priority site. In 2007, the National Oceanic and Atmospheric Administration (NOAA) produced a benthic habitat map of the Hawaiian Islands that was used as a foundation for this study. To support place-based management of the reef in the future, the U.S. Geological Survey (USGS) mapped the geologic zone, major and dominant geomorphological structure, biological cover type, and percent of biological cover for 11 square kilometers (km 2 ) of Olowalu Reef at a minimum mapping unit (MMU) of 100 square meters (m 2 ) to create a benthic habitat map. Heads-up digitization was employed on 0.50-meter (m) natural color satellite orthoimagery with ancillary 1-m acoustic backscatter imagery from single-scan sonar (sound navigation and ranging). A 1-m, 4-m, and 8-m digital bathymetric model (DBM) was interpolated from bathymetric lidar (light detection and ranging), and various geomorphometric layers derived from the DBMs were used for habitat interpretation. Still-frame imagery of the seafloor extracted from vessel-towed underwater video transects on Olowalu Reef served as ground validation points ( n =870) during active mapping and accuracy assessment points ( n =216) for thematic accuracy assessment. Thematic accuracy was cross-validated by the Hawai‘i Department of Land and Natural Resources Division of Aquatic Resources. Final thematic accuracy was 88.8 percent for major structure, 85.6 percent for dominant structure, 86.0 percent for major biological cover, and 78.6 percent for type and percent of major biological cover. Reef and hardbottom constituted 52 percent of the total mapped habitat, comprising mostly aggregate reef (31 percent) and pavement (11 percent), with large swaths of spur-and-groove (9 percent). Of this hardbottom, 17 percent was covered with moderate (10 to <50 percent) coral and 27 percent with high coral cover (50 to <90 percent). High (50 to <90 percent) macroalgae cover dominated the continuous sand sheets in offshore bank/shelf zones. The map created in this study supplements the NOAA 2007 map and expands on the observations made by USGS sampling of the reef. The NOAA 2007 map and our map differed in total areal extent by a negligible 6 m 2 and were in general thematic agreement. Our map is intended to serve as a baseline for public access, general research, local-level management, and reef change for future studies.

Hawaii↗

USGS2024

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota↗

USGS2024

Quantitative risk of earthquake disruption to global copper and rhenium supply

Earthquakes have the potential to substantially affect mining operations, potentially leading to supply chain disruptions and adversely affecting the global economy. This study explores the quantification of earthquake risk to copper and rhenium commodity supply by examining the spatial concentration of high earthquake hazard areas and the commodity-specific mining, smelting, and refining operations across the globe. Because many of the largest facilities are concentrated geographically near the highly seismic regions of South America, East Asia, and the Pacific, there is a potential for cascading effects on the entire supply chain. The analysis indicates that the expected annual disruption of global production is 0.3–1.1 percent for copper mines, 1.8–4.0 percent for smelters, and 1.5–3.3 percent for refineries. Expected annual disruption of global rhenium production capacity is 0.32–1.32 percent. The research highlights that the potential lost revenue from earthquake disruptions is from $315 million to $1.29 billion for copper mining, $1.92 billion to $4.33 billion for copper smelting, $2.06 billion to $4.52 billion for copper refining, and $337,000 to $1.40 million for rhenium production capacity.

Open-File Report↗

USGS2024

Simulation of groundwater flow and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River affects agricultural, municipal, and industrial water users and is an important concern in the Western United States. In the Paradox Valley of southwestern Colorado, natural discharge of sodium-chloride brine to the Dolores River from the underlying core of a salt-valley anticline accounts for about 6 percent of the salinity load to the Colorado River. Formation of the Paradox Valley began during the Miocene, and subsequent erosion exposed the Pennsylvania Paradox Formation in the core of the anticline where a cap rock, collapse features, breccia, and sodium-chloride saturated brine developed at the top of the exposed salt diapir. The discharge of brine to the Dolores River is affected by these dissolution features, along with seasonal hydrologic conditions and density-dependent flow between older dense brine and the younger fresh groundwater in the overlying alluvial aquifer. To reduce TDS concentrations in the Dolores River through the Paradox Valley, the Bureau of Reclamation has pumped brine from a series of shallow wells adjacent to the river since July 1996. The pumped brine is collected and piped to a deep disposal well where it is injected into the Mississippian Leadville Limestone at a depth of about 4,570-meters below land surface. The pumping and injection operation is collectively known as the Paradox Valley Unit (PVU), and by 2015, the PVU had substantially reduced TDS concentrations in the Dolores River by about 70 percent. Since 2019, injection-pressure limits and related seismic activity have constrained deep-well injection and thus brine pumping at the PVU. In cooperation with the Bureau of Reclamation, the U.S. Geological Survey developed a MODFLOW-6 three-dimensional, variable-density groundwater flow and TDS transport model of the Paradox Valley to evaluate the effects of PVU pumping operations on brine discharge to the Dolores River and to guide additional research. The finite-difference model grid consists of 76 rows and 48 columns oriented from northwest to southeast in alignment with valley topography and groundwater-flow directions in the near-surface freshwater alluvial aquifer. A 7-layer hydrogeologic framework was developed from existing datasets to represent the alluvial aquifer, cap rock, collapse breccia, and groundwater flow and TDS transport from the underlying Paradox Formation salt to the Dolores River. The model represents a 33-year transient calibration period from 1987 through 2020 that includes pre-PVU conditions from 1987 through June 1996 and post-PVU conditions from July 1996 through 2020. A 1,000-year simulation of groundwater flow and coupled TDS transport computed the initial conditions for the subsequent 33-year transient simulation. Observations of precipitation, streamflow, evaporation, agricultural land use, and PVU brine pumping rates were used to specify appropriate boundary conditions to the model representing time-varying recharge, tributary streamflow, groundwater underflow, evapotranspiration (ET), and PVU pumping. Values for average monthly streamflow and TDS concentration at the upstream streamgage, the Dolores River at Bedrock (USGS streamgage 09169500), were specified as model input where the Dolores River enters Paradox Valley. Observed pumping from the PVU, water levels and TDS concentrations in groundwater, and streamflow and estimated TDS concentrations at the downstream streamgage, the Dolores River near Bedrock (USGS streamgage 09171100), were calibration targets that constrained the manual calibration of model parameters representing aquifer hydraulic conductivity, storage, streambed conductance, recharge, and (ET). Two primary model-calibration targets were the match between observed and simulated TDS mass flux from PVU pumping wells and the match between estimated and simulated TDS mass flux to the Dolores River. The simulated TDS mass withdrawn by pumping wells is calculated by the model as the product of the assigned pumping rate and simulated groundwater TDS concentrations. Because actual pumping rates were assigned as simulated values, the total simulated PVU pumping for the 33-year calibration is within 0.5 percent of the observed values. However, simulated concentrations and thus mass flux of TDS withdrawn by the PVU pumping wells were consistently about 26 percent less than observed values for all the simulated time periods (33-year simulation, pre-PVU, and post-PVU). The representation of brine inflow was explored through additional modeling to evaluate the effect of the simulated brine source on groundwater TDS concentrations. Results indicated that a saturated-salt constant-flux brine source best replicated the magnitude and transient pattern observed for TDS mass flux from PVU pumping wells. The simulated TDS mass flux to the Dolores River is compared to estimates based on observed streamflow and specific conductance (SC) data for the downstream streamgage. The calibrated model provided a close fit of simulated to measured streamflow at the downstream streamgage, and the calibrated model fit to estimated TDS concentrations at the downstream streamgage was reasonable. The greatest differences between simulated and estimated values occurred during drought periods from June 2000 to March 2003, May 2012 to June 2013, and October 2013 to October 2014, when simulated TDS concentrations in the river were greater than estimated concentrations. In general, simulated TDS mass flux to the river for the pre-PVU period is in good agreement with estimated values (2-percent difference), but the model overestimated TDS mass flux to the river by about 41 percent during the post-PVU period. The model uncertainty with respect to TDS mass flux to the river indicates other processes or model parameters not well represented by the model are affecting the system, especially during drought. During model calibration, the most sensitive parameters were identified as vertical hydraulic conductivity of the alluvial aquifer, conductance of the Dolores River streambed, ET extinction depth and rate, and recharge rate. Five 5-year scenarios of conditions for 2021–25 were simulated to assist evaluation of alternative strategies to manage the discharge of brine into the Dolores River. The first scenario simulates no PVU pumping and serves as a base case for comparison to the other scenarios. Two scenarios simulate the effects of varying withdrawal timing at an annual rate about one-third less than during 2010 through 2018. During high-flow spring snowmelt runoff periods when brine discharge is naturally minimized, PVU pumping does not substantially affect salinity in the Dolores River, and comparison of these two scenarios indicates that scheduling brine withdrawals during times of low river stage is nearly as effective at reducing TDS mass flux to the river as pumping brine year-round. Cessation of pumping during periods of high river stage may be advantageous for system maintenance, brine injection, and seismic-risk reduction. The fourth scenario tested the effect of reducing irrigation-return flow on brine discharge and predicted a slight reduction of TDS mass flux to the Dolores River, but not as great a reduction as that of using the PVU to remove brine. The fifth scenario simulated 5 years of drought conditions without PVU pumping and indicates brine discharge during drought about 15 percent greater than during average hydrologic conditions. Results from scenario 5 are consistent with the calibrated model results and indicate that aquifer properties and ET processes and parameters may be affecting simulation results during drought. The Paradox Valley groundwater model provides a reasonable overall match to observed conditions in the Dolores River. The model is useful for evaluating relative differences between brine management scenarios to inform PVU operational decisions and to identify gaps in data and process understanding. Representation of the brine source, hydraulic-conductivity parameters, and recharge and ET processes were identified as potential areas for additional field and modeling research. Additional research in the Paradox Valley might include field-data collection that provides additional information on the hydrogeologic framework, groundwater levels, groundwater TDS concentrations, stream characteristics, and aquifer properties. Additional modeling efforts could benefit from applying advanced tools for model development, calibration, and visualization including parameter-estimation and sensitivity analysis. Statistical evaluation of known model uncertainties such as hydraulic conductivity, streambed conductance, representations of the brine source, recharge, and ET could improve the match between simulated and estimated TDS mass flux from PVU pumping wells and to the Dolores River further informing model predictions and system understanding for the Paradox Valley.

Colorado↗

USGS2026

Deformed submarine terraces in Puget Sound, Pacific Northwest, indicate only one M >~7.5 earthquake on the Seattle fault zone in the past 11,000 yr

Submerged marine terraces in Puget Sound, deformed across the Seattle fault zone (SFZ), indicate that only one earthquake as large as M~7.5 has occurred in at least the past 11 kyr. Previous paleoseismic studies document a M~7.5 earthquake between 923–4 CE, which uplifted coastal marine terraces by as much as 8 m. We demonstrate that this earthquake was the only such event since ~11 ka by mapping and quantifying deformation of older marine terraces, now submerged in Puget Sound. The submerged terraces, attributed to a late-glacial sea-level lowstand, record both glacial isostatic rebound and tectonic deformation. Vertical offset of the ~11 ka terraces within the SFZ is comparable to that of the marine terraces uplifted in 923 CE, implying no additional large (M>~7.5) earthquake on the SFZ since ~11 ka. This result implies a longer recurrence interval than current hazard estimates, which assumes recurrence of M>7.1 events every 5 kyr. Our mapping of SFZ deformation since ~11 ka also supports fault segmentation and contiguous block uplift between the Seattle and Tacoma fault zones.

Washington↗

USGS2025

Summary of results from monitoring the Geysers with continuous passive seismic and repeat magnetotelluric measurements (2021-2023)

Understanding temporal variations in a geothermal field can support operators in decision making that pertains to optimizing production and mitigating hazards. Between 2021 and 2023, The Geysers geothermal field in northern California was monitored with an array of continuous passive seismic sensors and annual repeat magnetotelluric (MT) measurements. Each of these data sets were analyzed and modelled separately to understand the data, sensitivity, and any observable changes. Then, the data were inverted jointly using a crossgradient method to further constrain temporal changes in geophysical properties within the geothermal field. Multiple permutations of annual datasets were used as inputs to the joint inversion. Results demonstrate seismic data constrain smooth inversion of the MT data, and the MT data provide supplementary information about the location of temporal fluid changes. Estimating relative changes in steam saturation for various time intervals of the joint models shows compartmentalized changes in the field, and good spatial correlation with the location of injection wells. These results demonstrate that collecting both passive seismic and MT measurements then modeling them jointly provide complementary information and a relatively inexpensive method for monitoring temporal changes in an active geothermal field that provides results to support operators.

California↗

USGS2025

Peak streamflow trends in Montana and northern Wyoming and their relation to changes in climate, water years 1921–2020

Frequency analysis on annual peak streamflow (hereinafter, peak flow) is essential to water-resources management applications, including critical structure design (for example, bridges and culverts) and floodplain mapping. Nonstationarity is a statistical property of a peak-flow series such that the distributional properties (the mean, variance, or skew) change either gradually (monotonic trend) or abruptly (shift, step change or change point) through time. Not incorporating or accounting for observed nonstationarity into peak-flow frequency analysis might result in a poor representation of the true probability of large floods and thus misrepresent the actual flood risks to life and property. This report summarizes how hydroclimatic variability might affect the temporal and spatial distributions of peak-flow data in the State of Montana (and northern Wyoming) and is part of a larger study to document peak-flow nonstationarity and hydroclimatic changes across a nine-State region consisting of Illinois, Iowa, Michigan, Minnesota, Missouri, Montana, North Dakota, South Dakota, and Wisconsin. A wide range of analyses and statistical approaches are applied to document the primary mechanisms controlling floods and characterize temporal changes in hydroclimatic variables and peak flows. This study was completed in cooperation with the Montana Department of Natural Resources and Conservation. The purpose of this report is to characterize temporal and spatial patterns of nonstationarity in peak flows and hydroclimatology in Montana and northern Wyoming. In this evaluation, peak-flow, daily streamflow, and model-simulated gridded climatic data were examined for monotonic trends, change points, and other statistical properties that might indicate changing climatic and environmental conditions. This report includes background information on the study area, the history of U.S. Geological Survey peak-flow data collection and frequency analysis in Montana, and the review of research relating to hydroclimatic variability and change in Montana. This study might help provide a framework for addressing potential nonstationarity issues in peak-flow frequency updates that commonly are completed by the U.S. Geological Survey in cooperation with other agencies throughout the Nation. The analytical structure of this study includes analyses of monotonic trends and change points in numerous hydroclimatic variables in assigned 30-, 50-, 75-, and 100-year analysis periods. For Montana and part of Wyoming, the 30-, 50-, 75, and 100-year analyses included 157, 70, 48, and 12 streamgages, respectively. For those streamgages, nonstationarities were analyzed in the following variables: (1) climatic variables, including annual and seasonal (winter, spring, summer, and fall) temperature and precipitation; (2) daily streamflow variables, including the annual center of volume duration, annual center of volume median, and peaks over threshold with a mean of four events per year; and (3) annual peak-flow variables, including peak-flow timing and magnitude. A likelihood approach was used to express statistical confidence and assign the nonstationarity results as likely upward or downward (highest statistical confidence), somewhat likely upward or downward (less statistical confidence), or about as likely as not (little statistical confidence; hereinafter, neutral). For the nonstationarity analyses of the climatic, daily streamflow, and peak-flow variables, the results are presented in detail and discussed with respect to statewide patterns and geographic variability. For each of the 30-, 50-, and 75-year analyses, peak-flow change-point and monotonic trend analyses were compiled for streamgages classified with likely downward or likely upward trends. For those streamgages, the associated basin characteristics and nonstationarity results for peak-flow timing, daily streamflow, and climatic variables were investigated and statistically compared to discern associations among other variables that might contribute to the peak-flow nonstationarity results. The 50- and 75-year peak-flow nonstationarities identified in this study are mostly downward, in association with mostly upward temperature and potential evapotranspiration:precipitation monotonic trends. For the 50-, 75-, and 100-year analyses, the peak-flow change points are predominantly downward and are concentrated in the 1970s and 1980s, which indicates general consistency among the longer trend periods. These findings are in association with substantial research documenting globally rising temperature and atmospheric greenhouse gas concentrations that might be largely attributed to anthropogenic activities. Anthropogenic effects might represent long-term (on the order of several decades to more than a century) climate changes that might happen within highly variable natural climate fluctuations. Several paleo studies in the north-central United States have indicated that hydroclimatic extremes (that is, low- and high-streamflow conditions) before European settlement have been outside of extremes since the 1900s. Depending on the interactions of anthropogenic effects and natural climate variability, extreme high-streamflow conditions might occur in the future, even in the presence of long-term downward peak-flow trends.

Montana, Wyoming↗

USGS2025

Bayesian ETAS modeling for the Pacific Northwest: Uncovering effects of tectonic regimes, regional differences, and swarms on aftershock parameters

The Pacific Northwest (PNW) of North America has high seismic hazard due to numerous earthquake sources under populated areas. It hosts several tectonic regimes and subregional seismic zones that are hypothesized to have different patterns of earthquake and aftershock occurrence. It is also predisposed to earthquake swarms, which can complicate the statistical modeling of these patterns. We present the first statistical seismicity model of the PNW catalog using the epidemic‐type aftershock sequence (ETAS) framework. We develop a Bayesian inference procedure that provides a stable estimation of both ETAS parameters and their uncertainties for different sets of PNW earthquakes, even those with very sparse catalogs. The Bayesian approach allows us to investigate how parameter estimates change between the intraslab and crustal tectonic regimes, the northern and southern PNW, and when swarms are included and excluded from the catalog. We also utilize our Bayesian framework to calculate parameter estimates under different prior beliefs about PNW seismicity, as well as to propagate catalog measurement errors into ETAS parameter estimates. We discuss the implications of parameter differences across the region for aftershock forecasting for the PNW.

Pacific Northwest↗

USGS2026

SlideDetect: Spatio-temporal landslide detection using a three-dimensional convolutional neural network

Landslides pose a serious and ongoing threat to both human lives and infrastructure worldwide; therefore, it is of interest to predict where and when landslides are likely to occur. Advances in machine learning techniques have spurred numerous studies aimed at estimating relative landslide propensity, but are limited to spatial (as opposed to temporal) prediction due to the sparsity of landslide timing data. We address this data gap by training SlideDetect, a 3-dimensional convolutional neural network (3D CNN), to identify landslides based on their spatial and temporal occurrence within multitemporal image stacks. We use an inventory of landsides triggered by the 2018 Hokkaido earthquake and two years of monthly composite optical imagery spanning this event. The model can identify not only landslide location but also landslide date with an area under the precision-recall curve (PR-AUC) of 0.84. We further present a new standard for presenting PR curve results that explicitly compares model performance at different confidence thresholds, allowing for clearer model evaluation and comparison. Our new approach to constraining landslide timing paired with this more consistent and objective method for evaluating model performance shows considerable promise, and with further application and testing, SlideDetect could enhance the data availability and tools needed to advance landslide hazard and risk assessments.

JGR Machine Learning and Computation↗

USGS2026

Hydrogeologic conceptualization of the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory, Edwards Air Force Base, Antelope Valley, California, 2017–21

Research and testing within the Air Force Research Laboratory at Edwards Air Force Base in the southwestern Mojave Desert has been conducted since the 1950s. This testing requires large quantities of groundwater for cooling and operations involving hazardous constituents that have entered the groundwater. To better understand the potential movement of contaminants through the groundwater system, the U.S. Geological Survey entered into a cooperative agreement with the U.S. Air Force Civil Engineer Center with the purpose of (1) gaining a more detailed understanding of the hydraulic connection between the unconsolidated basin-fill sediment and the underlying weathered and crystalline bedrock and (2) investigating faults and their potential effect on groundwater flow. This study was specific to the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory. The refined hydrogeologic characterization was derived by evaluating surface geologic maps, a regional gravity model, new subsurface geophysical surveys, lithology data from boreholes, and groundwater-level data. Refinement of the hydrogeologic characterization of the study area involved developing a map of basin-fill sediment thickness, estimating the geometry and depth to bedrock, determining the presence of weathered bedrock material, and identifying the location of faults and subsurface structures. The thickness of basin-fill sediment was derived from a regional gravity model. Basin-fill sediment ranges from less than 20 feet (ft) thick to about 150 ft thick and increases substantially toward a deep structural basin in the northwestern part of the study area. The top of bedrock estimated from the new surface geophysical surveys is generally deeper than the top of bedrock from the regional gravity model. These differences in interpreted bedrock tops indicate that there may be a zone of weathered bedrock in the subsurface, overlying crystalline bedrock. Additional subsurface data evaluating the geometry and thickness of weathered bedrock are necessary for a comprehensive evaluation of weathered bedrock in the study area. Previously unmapped extensions of the Leuhman Fault, Spring Fault Zone, and Boron Gate Fault were identified in the new surface geophysical surveys. Evaluation of groundwater flow between bedrock and basin-fill sediment, and the effects of faults on groundwater flow, was done using groundwater-level data from 2020. The groundwater table was in crystalline bedrock throughout most of the Arroyos and Northeast Air Force Research Laboratory subareas, with a few exceptions where it was in basin-fill sediment and weathered bedrock. Basin-fill sediment, and likely weathered bedrock, was partially saturated in parts of the study area where basin-fill sediment was as thick as 150 ft. Weathered bedrock material may be present near the Spring Fault Zone, and if so, was likely saturated in 2020. The groundwater-level data near and within Spring Fault Zone indicate that the Spring Fault Zone acts as a vertical-along-strike conduit for, and as an across-strike impediment to, groundwater flow. In addition, steep groundwater-level gradients in the southeastern part of the study area indicate that a subsurface structure affecting groundwater flow could be related to the Leuhman Fault. Sufficient groundwater-level data were not available to conclusively determine if the Arroyos, Rich, and Boron Gate Faults, and their inferred extensions from the geophysical surveys, affect the movement or direction of groundwater flow.

California↗

USGS2024

Long-term communication of aftershock forecasts: The Canterbury earthquake sequence in New Zealand

On 14 February 2016, a magnitude (M)5.7 earthquake struck in Christchurch New Zealand (Aotearoa in the Maori language). The shaking caused damage to historic facades, power outages, cliff collapses, rock falls, and liquefaction but no reported injuries or fatalities. This Valentine’s Day earthquake was an aftershock in the Canterbury earthquake sequence (CES), which began on 4 September 2010 with the M7.1 Darfield Earthquake and included the destructive and fatal M6.2 Christchurch aftershock on 22 February 2011. This study, eight months after the Valentine’s Day earthquake and six years after the initiation of the CES, is the first to explore long-term aftershock forecast information and communication needs. The exploratory study also aimed to gather feedback on aftershock scenarios, an alternative form for communicating the forecast. The qualitative study involved workshops with emergency managers, public health officials, and members of the public in Christchurch. Key findings for long-term communication throughout an earthquake sequence include: 1. divergent earthquake experiences affect aftershock communication response and information needs; 2. understanding aftershock sequence behavior is foundational to sense-making when large aftershocks occur; 3. strategic earthquake sequence updates from the trusted science agency and local agencies could serve as important reminders for earthquake preparedness; 4. communication of aftershock forecast uncertainty could aid with both the credibility of the information and living with uncertainty, and 5. inclusion of impact information and preparedness advice into aftershock forecast scenarios could provide links to actionable information. The paper derives implications for research and practice of long-term communications during an aftershock sequence.

Christchurch↗