USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of the Air & Waste Management Association”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 35Linked to original sources
USGS2025

Structural analysis of brittle-plastic shear zones in the Sangre de Cristo Range, southern Colorado USA: Superposition of Rio Grande rift extension on Laramide contraction

The Sangre de Cristo Range in southern Colorado exposes some of the deepest Cenozoic structural levels in the Rocky Mountain region, including mylonitic shear zones associated with both the Laramide orogeny and Rio Grande rift. We investigated the relation between Laramide contraction and Rio Grande rift extension with detailed geologic mapping, kinematic analysis, and geochronometry in a 50 km 2 area centered on the Independence Mine shear zone (IMSZ). The 15−100-m-thick IMSZ is one of several shallowly to moderately (∼45° ± 20°) W-SW−dipping brittle-plastic shear zones along the western flank of the range. These shear zones display microstructural evidence of initiation as top-NE contractional mylonite zones, consistent with regional Laramide kinematics, which have been pervasively overprinted by shear fabrics indicating top-SW extensional reactivation. Both top-NE and top-SW shear fabrics involve cataclasis and quartz dislocation creep, although top-SW shear is more commonly localized along phyllosilicate-lined shear bands. Shear zones are hosted predominately within Proterozoic gneiss, and contain abundant chlorite and white mica derived from alteration of hornblende and feldspar, which indicates that weakening driven by fluid reactions played an important role in localizing strain. Extensional overprinting appears to be most pervasive along more steeply dipping portions of shear zones and where secondary phyllosilicates form an interconnected weak phase, which suggests that reactivation was primarily controlled by geometry and rheological contrasts inherited from contraction. One top-SW shear zone adjacent to the IMSZ cuts a late Oligocene gabbro stock, and monazite grains synkinematic with top-SW shear in the IMSZ yielded late Oligocene to Early Miocene U-Th-Pb dates that correspond with initiation of the Rio Grande rift. Reactivation of weak reverse faults may represent an important structural control during initial extension in the middle crust, prior to slip along the high-angle Sangre de Cristo normal fault system.

Colorado↗
USGS2025

Groundwater flowpath characteristics drive variability in per- and polyfluoroalkyl substances (PFAS) loading across a stream-wetland system

Groundwater-dependent ecosystems in areas with industrial land use are at risk of exposure to a PFAS chemicals. We investigated one such system with several known PFAS source areas, where high and low permeability sediments (glacial) coupled with groundwater-lake and groundwater/surface-water interactions created complex ‘source to seep’ dynamics. Using heat-tracing and chemical methods, numerous preferential groundwater discharge zones were identified and sampled across the upper Quashnet River stream-wetland system in Mashpee, MA, USA, downgradient of Joint Base Cape Cod (JBCC). Surface-water and groundwater samples were analyzed for 40 PFAS compounds between March and October 2022. Samples were collected from groundwater seeps identified as preferential discharge points (PDPs), wells upgradient of the stream-wetland system, contributing flow-through kettle lakes, and along Quashnet River surface-waters. PFAS from sampled waters contained perfluorinated carboxylates (PFPea, PFHxA, PFNA), perfluorinated sulfonates (PFBS, PFPeS, PFHxS, PFOS), fluorotelomer sulfonates (6:2, 8:2 FtS), and perfluoroalkyl sulfonamides (PFOSA). Samples from PDPs and wells had measured PFAS concentrations ranging from non-detect to 4677 ng/L ng/L (mean = 418 ng/L, std. = 709 ng/L), and a range of deuterium excess values (3.2 to 15.9 per mil) indicative of varying degrees of groundwater-lake interaction prior to groundwater flowpath emergence at PDPs. Correlations ( p < 0.01) between deuterium excess, %PFAS precursors, and terminal PFAS compounds highlighted potential precursor transformations associated with lake-groundwater exchange along flowpaths sourcing PDPs. However, some seepages had higher total PFAS concentrations (>1000 ng/L) than upgradient kettle lakes despite showing lake (evaporative) isotopic signatures, indicating the potential for groundwater flowpath convergence at wetland discharge zones and the influence of lakebed PFAS precursor reactions. Results from these synoptic surveys address gaps in the existing PFAS literature by demonstrating the importance of subsurface fate and transport on PFAS compound concentrations and mass loading in preferential groundwater discharge zones.

Massachusetts↗
USGS2025

Revisiting an enigma on California's north coast: The Mw6.5 Fickle Hill earthquake of 21 December 1954

Many earthquakes occur along the North Coast of California in the vicinity of the Mendocino Triple Junction (MTJ), where the Pacific, Gorda, and North American (NA) plates meet, and on the adjacent plate boundaries. The MTJ marks the nexus of the Mendocino and San Andreas faults with the Cascadia subduction zone (CSZ). Historically, most large earthquakes around the MTJ have been within the offshore Gorda plate and its subducted portion beneath the NA plate. North of the MTJ, active faults mapped in the NA plate are part of the CSZ fold‐and‐thrust belt. Although some events have been detected in the NA plate, no large historic events have been associated with mapped surface faults. The 21 December 1954 M w 6.5 earthquake in Humboldt County is one possible exception. Using published data from catalogs and articles, unpublished data from Berkeley’s archives, and S ‐ P times interpreted from two U.S. Coast and Geodetic Survey (USCGS) accelerometers, we determine a probability cloud for the earthquake’s hypocenter using NonLinLoc. The highest probability location lies beneath Fickle Hill just east of the city of Arcata, California, at 40.87° N, 124.03° W, and ∼11 km depth. Using P ‐wave polarities from Berkeley stations and the digitized waveforms from the accelerometers, we find that the focal mechanism most consistent with the data indicates thrust movement with strike, dip, and rake of 350°, 10°, and 90°, respectively, at a depth of 14 km. Given the depth uncertainties of both this event and the megathrust, this implies that the earthquake most likely took place on the subduction interface rather than on the mapped faults in the Mad River fault zone that trend 322° and dip to the northeast. The revisited intensity in the epicentral region also supports a location beneath Fickle Hill to the east of the city of Arcata, California.

California, Idaho, Nevada, Oregon, Washington↗
USGS2024

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 2 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 2, the subject of this scientific investigations map, has a mapped area of 209 km 2 and has water depths that range from about 19 meters (m) on the Stellwagen Bank crest to about 68 m in the Stellwagen Basin. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates across the southwestern part of Stellwagen Bank, in Stellwagen Basin to the west and southwest of the bank, and in Little Stellwagen Basin and the western part of Race Point Channel to the south of the bank. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 733 stations were analyzed, including 656 sediment samples. The geologic substrate maps of quadrangle 2 show the distribution of 19 geologic substrates that represent a wide range of textures, such as rippled and immobile sand, immobile muddy sand and sandy mud, sand that partially veneers gravel, and a boulder ridge. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 2. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that utilize the various substrates, and support seabed management in the region.

Massachusetts↗
USGS2025

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska↗
USGS2026

Evidence for organic and igneous carbon sources in the Mesoproterozoic Adirondack Highlands graphite district, New York

This study examined the origin of graphite mineralization in the Mesoproterozoic Adirondack Highlands. Flake graphite was mined from the historic mining district around Ticonderoga, New York, USA, from the 1850s to the 1920s. Most of the production and reserves from the district are disseminated graphite from feldspathic quartz schists (e.g., Dixon-American Graphite Co. mine, Faxon property, Flake Graphite Company). Protolith sediments of the schists were deposited in the Trans-Adirondack backarc basin at ca. 1.25 Ga and were metamorphosed to high grade at 1.18–1.15 Ga during the accretionary Shawinigan orogeny and at 1.09–1.02 Ga during the Ottawan phase of the Grenvillian orogeny. Major elements and carbon isotopes of graphite from schists (δ 13 C = −28.1‰ to −5.4‰ relative to Vienna Peedee belemnite) are consistent with derivation from organic carbon in protolith sandstones that devolatilized during metamorphism. Some small mines and prospects in the district mined graphitic calcite marbles and clinopyroxene ± scapolite skarns associated with a pegmatite suite dated by U-Pb in zircon to 1.04–1.01 Ga (e.g., Lead Hill and Crown Point deposits), and rare graphite veins are observed at several deposits. Hydrothermal flake graphite from pegmatites, skarns, and veins are distinct from graphite in schist-hosted deposits and have δ 13 C values that cluster around −7‰ to −5‰, consistent with deposition from igneous CO 2 . Covariation of carbon and oxygen stable isotopes and U-Pb zircon geochronology are not compatible with precipitation from fluids derived from country rock metapelites or marbles. Some graphite districts elsewhere show compelling evidence for remobilization and redeposition of sedimentary-derived carbon as hydrothermal graphite, sometimes as thick veins producing world-class, high-grade deposits. In the Adirondacks, there is evidence for two generations of graphite mineralization with distinct carbon sources: syngenetic graphite with an organic origin in Shawinigan quartz schists and epigenetic graphite with an igneous origin in Ottawan skarns and pegmatites.

New York↗
USGS2024

Separating signals in elevation data improves supervised machine learning predictions for hydrothermal favorability

A recent study identified topography (land surface elevation above sea level) as an important input dataset (feature) for predicting the location of hydrothermal systems in the Great Basin in Nevada. Yet, topography is generally a result of more than one geological process and may consequently contain multiple distinct signals. For example, the geologic evolution of the Great Basin has produced both crustal thickening (i.e., regional-scale trends in elevation) and thinning via Basin and Range extensional faulting (i.e., valley-scale topographic relief). We postulate that these geologic processes may affect the occurrence of hydrothermal systems differently. Therefore, we separate the regional trend from the valley-scale signal in the Great Basin, and then use them separately to evaluate the importance of each as predictors for hydrothermal favorability. Our prior work applying supervised machine learning (ML) using the data from the Nevada Machine Learning Project demonstrated that employing a training strategy that randomly selects negative training sites produces better performing models for predicting hydrothermal favorability than a training strategy that uses expert-selected negatives. The models created using both training strategies exhibited a west-east geographic trend in the predictions for the favorability of hydrothermal resources. These models generally predicted higher favorability in western Nevada and lower favorability in eastern Nevada. This west-east trend in predicted favorability correlates with elevation across the Great Basin, which trends higher from west to east. By separating the original elevation feature into distinct features for elevation trend (i.e., regional-scale topography) and detrended elevation (i.e., valley-scale or local relative topography), we find that models using the separated topographic signals consistently outperform competing models that use the original elevation feature. Although western Nevada still exhibits higher favorability than eastern Nevada, using separated signals for regional elevation and local structure reduces the west-east prediction trend in the region and emphasizes structures associated with hydrothermal upflow. This work emphasizes how carefully engineering features to represent geological conditions relevant to hydrothermal systems allows ML algorithms to detect important patterns for predicting hydrothermal resource favorability and leads to better model performance.

Conference Paper↗
USGS2026

Insights into Mountain Pass carbonatite formation from in-situ sulfur isotopes and geochemistry of sulfate and sulfide minerals

The Mountain Pass carbonatite stock hosts a world-class rare earth element deposit and may be classified as a carbonate-sulfate igneous rock, as it contains on average > 50 volume percent carbonate minerals and 20 to 30 volume percent sulfate minerals. The sulfates range in composition from barite to celestine and locally occur with sparse sulfide minerals. We investigate the origin of sulfur enrichment and the occurrence of sulfur-bearing minerals in the Mountain Pass carbonatite with in-situ sulfur isotope and mineral chemistry. Barite cores with δ 34 S of 1 to 3‰ do not coexist with sulfides, whereas celestine rims with δ 34 S of > 3‰ are associated with sulfides with δ 34 S < -10‰. We propose a model in which sulfur-bearing sediments were subducted during episodes of plate convergence in the Mojave Province that preceded Mountain Pass magmatism. Metasomatism of the overlying mantle by melts derived from the subducted sediments generated an unusually carbon- and sulfur-rich source to yield carbonatite magmas. Sulfur from primary carbonatite magmas and ~ 1 to 7% sulfur from subducted sediment melts yielded a slightly enriched δ 34 S composition (relative to depleted mantle δ 34 S of -1‰) for early crystallizing barite. Celestine rims on magmatic barite cores formed at low, hydrothermal temperatures (< 350 °C) based on S isotope thermometry for equilibrium celestine-galena and celestine-pyrite pairs. The sparse sulfides in the carbonatite stock are not in equilibrium with the primary barite cores and therefore do not permit S isotope thermometry estimates of magmatic temperatures. The S/Se ratios of sulfide minerals (> 3,400) typically exceed primitive mantle values (S/Se of 3,340), also consistent with their derivation from hydrothermal fluids. Trace occurrences of sulfide and sulfate minerals in alkaline silicate stocks related to the carbonatite stock have similar δ 34 S compositions and yield similarly low formation temperatures, suggesting regionally extensive and chemically similar sulfur-bearing hydrothermal fluids that imparted lithologically diverse rocks with a consistent sulfur isotope fingerprint.

California, Nevada↗
USGS2026

Uncertainty quantification of geologic energy storage in depleted gas reservoirs using material balance equations embedded in a hierarchical errors-in-variables model

The storage potential for gas in geologic settings, such as depleted hydrocarbon reservoirs and solution-mined salt caverns, is becoming salient to future energy infrastructure planning. Technologies such as carbon capture, utilization, and storage, carbon dioxide-enhanced oil recovery, and natural gas and hydrogen storage help meet growing energy demands, reduce carbon emissions to meet climate goals, and provide energy security amid geopolitical uncertainties. Therefore, estimates of underground gas storage capacity could be useful for efficiently navigating the energy transitions. Material balance is a fundamental method in reservoir engineering for estimating original gas in place and potential storage capacity at the scale necessary for national assessments of subsurface pore space resources. However, the deterministic method cannot accommodate multiple data sources or quantify uncertainty in predictions. In this study, a method that embeds material balance equations within a hierarchical errors-in-variables model is proposed which allows the estimation of the distributions of reservoir properties needed for assessments. Uncertainties associated with these reservoir properties have traditionally been expert-elicited, whereas the uncertainty estimates from the proposed models are data-driven. Capacity and uncertainty estimates can be used in a probabilistic resource assessment, supplementing information traditionally used by assessors or even replacing this expert elicitation step when data are unavailable. Various regression models are compared in a case study of the Michigan Basin, a large contributor to the United States’ current natural gas storage capacity. In particular, errors-in-variables models help ameliorate regression dilution and can quantify uncertainty in predictions of pressure in addition to storage capacity. Overfitting is addressed by quantifying generalization error and model averaging in simple and stratified cross-validation against reported working gas capacity, representing the varying quality and quantity of available data. Incorporating a statistical framework into existing numerical methods in reservoir engineering can improve the quality of estimation, and in particular, this method brings rigor to uncertainty quantification as part of a larger effort by the U.S. Geological Survey to assess domestic energy gas storage resources in depleted hydrocarbon reservoirs.

Mathematical Geosciences↗
USGS2025

Geochemistry and radiogenic isotopes constrain the mantle source region of the Mountain Pass Intrusive Suite, California

The Mountain Pass carbonatite stock is the largest rare earth element (REE) deposit and only active REE mine in the United States. The carbonatite intrusion and spatially associated alkaline silicate intrusions constitute the Mountain Pass Intrusive Suite, which is located within the Mojave Province in California. Both the carbonatite and the alkaline silicate rocks are enriched in large ion lithophile elements and light REEs, and less enriched to depleted in high field strength elements, indicating the mantle source region was metasomatically enriched in incompatible trace elements. The cause of this metasomatic mantle enrichment and the genetic relationship between the carbonatite and the alkaline silicate stocks are poorly understood. In this study, major and trace element geochemical data and isotopic (Rb-Sr, Sm-Nd, and Lu-Hf) data are presented to constrain genesis of the Mountain Pass Intrusive Suite, from mantle source region to the intrusion of the stocks. Our geochemical data are consistent with derivation of the alkaline silicate and carbonatite melts through partial melting from a shared mantle source region rather than through liquid immiscibility or fractional crystallization and separation of a carbothermal fluid. Although the Rb-Sr isotopic system in the Mountain Pass Intrusive Suite is disturbed at the whole-rock scale, the isotopic systems for whole-rock Sm-Nd (εNd i = ‐2.2 ± 0.8) and zircon Lu-Hf (εHf i = 0.1 ± 1.1) are robust and support mantle derivation of the magmas. Geochemical modeling using experimentally derived partition coefficients was used to identify possible causes of enrichment in incompatible elements through metasomatism in the mantle source region. Modeling of metasomatism by melts derived by partial melting of deeply subducted carbonated sediments approximates observed Mountain Pass Intrusive Suite trace element chemistry. Scattered εHf i in inherited zircon (2.8 ± 2.6) is consistent with derivation from an arc-related environment with substantial crustal contamination. Paleotectonic studies in the Mojave Province indicate that regional subduction preceded emplacement of the Mountain Pass Intrusive Suite by ∼300 Ma. Melting of the Mountain Pass source region may have been caused by post-collisional thermal relaxation and extension.

California↗
USGS2025

The influence of pre-existing structures on geothermal springs: Inferences from potential field mapping in Surprise Valley, CA and other sites In the northwestern Great Basin

Surprise Valley, located in the northwestern Great Basin, is an asymmetric extensional basin that marks a major tectonic transition between the relatively un-extended volcanic Modoc Plateau to the west, and the Basin and Range to the east that has undergone 10-15% extension. In addition, it sits just north of the Walker Lane which accommodates up to 20% of dextral slip associated with Pacific-North American plate interactions. Thermal springs issue from eight areas within Surprise Valley. Most of these occur within the basin and are not situated on the main basin forming range-front faults. As a result, efforts to resolve the structural setting of the valley’s hydrothermal system have relied on geophysics to characterize basin structure and geology. Extensive efforts to map the basin with ground and airborne magnetics have revealed a >35 km-long linear, intra-basin magnetic high, interpreted as a buried dike swarm. Geothermal springs on the eastern side of the valley, including Seifert hot springs, Leonards hot springs, and Surprise Valley hot springs (SVHS), are all situated along the magnetic high and occur at local breaks and bends in the anomaly, suggesting that fracture permeability is enhanced along the feature and particularly at these discontinuities. Recent studies, including drilling over the anomaly near SVHS that likely intersected dike material, as well as subsequent mapping and sampling of dikes outcropping along the anomaly on the playa surface south of SVHS, confirm (as previously inferred) that mafic intrusives are the principal source of the anomaly. Similar interpretations made in two other valleys (in southern Oregon and northwestern Nevada), where inferred intra-basin dikes appear to be spatially correlated with hot springs or prospective geothermal resource areas, suggest that the impact of pre-existing basement structure on hydrothermal activity may pertain more generally to other hydrothermal settings throughout the Great Basin. If so, efforts to map basement may enhance understanding structural controls on some geothermal systems. Furthermore, similarities across these disparate sites suggest that magmatism may play a much larger role in accommodating extension and influencing basin evolution across the western Great Basin than previously recognized.

Conference Paper↗
USGS2026

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 3 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 3, the subject of this scientific investigations map, has a mapped area of 185 km 2 and has water depths that range from about 30 meters (m) on the Stellwagen Bank crest to about 135 m in a basin east of South Ninety Bank, which lies off the eastern margin of Stellwagen Bank. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates on the southeastern part of Stellwagen Bank, on adjacent banks and basins in deeper water to the east, in the eastern part of Race Point Channel to the south of the bank, and on the northern slope of Cape Cod. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 309 stations were analyzed, including 279 sediment samples. The geologic substrate maps of quadrangle 3 show the distribution of 21 geologic substrates that represent a wide range of textures, such as rippled sand, immobile sand, immobile muddy sand, sand that partially veneers gravel, and boulder ridges. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 3. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that use the various substrates, and support seabed management in the region.

Quadrangle 3 of the Stellwagen Bank National Marin↗
USGS2025

Hydrogeologic framework and conceptual model of the Red River alluvial aquifer east of Lake Texoma, southeastern Oklahoma, 1980–2022

The 1973 Oklahoma Groundwater Law (Oklahoma Statutes §82-1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s groundwater basins to support a determination of the maximum annual yield for each groundwater basin. At present (2025), the Oklahoma Water Resources Board has not established a maximum annual yield for the Red River alluvial aquifer east of Lake Texoma. To support the evaluation and determination of a maximum annual yield, a hydrogeologic framework and conceptual groundwater-flow model were developed to assess groundwater availability in the Red River alluvial aquifer east of Lake Texoma. The scope of this hydrologic investigation is the alluvium and terrace containing the Red River alluvial aquifer in Oklahoma between Lake Texoma, the Texas State line, and the Arkansas State line, an extent referred to in this report as “the eastern part of the Red River alluvial aquifer.” Parts of the alluvium and terrace extent in Arkansas and Texas are included in some analyses to address hydrologic influences from outside the aquifer’s boundaries in Oklahoma. The eastern part of the Red River alluvial aquifer in southeastern Oklahoma consists of approximately 401,280 acres of Quaternary alluvium and terrace deposits associated with the Red River and its major tributaries. Mean annual recharge to the aquifer for the 1980–2022 study period was estimated to be 8.62 inches per year, or 17.98 percent of the mean annual precipitation over the same period (47.94 inches). This mean annual recharge rate is equivalent to an inflow of approximately 288,250 acre-feet per year for the eastern part of the Red River alluvial aquifer. Recharge estimated using the Soil-Water-Balance code accounts for 98.7 percent of the conceptual-model inflows to the eastern part of the Red River alluvial aquifer. Saturated-zone evapotranspiration accounts for 11.9 percent and net streambed seepage accounts for 87.4 percent of the outflows in the conceptual model.

Arkansas, Oklahoma, Texas↗
USGS2024

Layered intrusions in the Precambrian: Observations and perspectives

Layered intrusions are plutonic bodies of cumulates that form by the crystallization of mantle-derived melts. These intrusions are characterized by igneous layering distinguishable by shifts in mineralogy, texture, or composition. Layered intrusions have been fundamental to our understanding of igneous petrology; however, it is their status as important repositories of critical metals – such as platinum-group elements, chromium, and vanadium – that has predominantly driven associated research in recent decades. Many layered intrusions were emplaced during the Precambrian, predominantly at the margins of ancient cratons during intervals of supercontinent accretion and destruction. It appears that large, layered intrusions require rigid crust to ensure their preservation, and their geometry and layering is primarily controlled by the nature of melt emplacement. Layered intrusions are best investigated by integrating observations from various length-scales. At the macroscale, intrusion geometries can be discerned, and their presence understood in the context of the regional geology. At the mesoscale, the layering of an intrusion may be characterized, intrusion-host rock contact relationships studied, and the nature of stratiform mineral occurrences described. At the microscale, the mineralogy and texture of cumulate rocks and any mineralization are elucidated, particularly when novel microtextural and mineral chemical datasets are integrated. For example, here we demonstrate how mesoscale observations and microscale datasets can be combined to understand the petrogenesis of the perplexing snowball oiks outcrop located in the Upper Banded Series of the Stillwater Complex. Our data suggest that the orthopyroxene oikocrysts did not form in their present location, but rather formed in a dynamic magma chamber where crystals were transported either by convective currents or within crystal-rich slurries. Critical metals may be transported to the level of a nascent intrusion as dissolved components in the melt. Alternatively, ore minerals are entrained from elsewhere in a plumbing system, potentially facilitated by volatile-rich phases. There are many ore-forming processes propounded by researchers to occur at the level of emplacement; however, each must address the arrival of the ore mineral, its concentration of metals, and its accumulation into orebodies. In this contribution, several of these processes are described as well as our perspectives on the future of layered intrusion research.

Precambrian Research↗
USGS2026

Ungulate migrations of the Western United States, volume 6

This report, volume 6 in the “Ungulate Migrations of the Western United States” report series, showcases the migrations of 23 ungulate herds in the Western United States. The report series is produced by the Corridor Mapping Team (CMT). Led by the U.S. Geological Survey, the CMT is a collaboration among 11 State agencies, as well as regional and Federal partners, and an expanding number of Tribal wildlife agencies. The CMT was initiated in response to the U.S. Department of the Interior Secretarial Order 3362, which was signed in 2018 and provided Federal support to expand existing research efforts to study ungulate populations and conserve their migrations throughout the Western United States. Including this volume, the report series has detailed the migrations of 237 unique ungulate herds throughout the Western United States and continues to serve as a valuable resource to guide local and regional management, policy, and on-the-ground work necessary to maintain intact and functional ungulate migrations. This report highlights several guiding principles of the CMT that facilitate collaboration among the diverse set of partners and contribute to the program’s continued successes. Notably, raw global positioning system data are not shared among participating agencies and the U.S. Geological Survey, delineating migration corridors and seasonal ranges relies on empirical data, the CMT provides flexible approaches to participating State and Tribal partners, and regular CMT meetings create a framework for open communication among agency partners that supports transboundary mapping of migrations. The 237 ungulate migrations that have been included in the report series are an expanding inventory, which can help maintain ungulate migrations in perpetuity.

Arizona, California, Colorado, Idaho, Montana, Nev↗
USGS2025

Hydrogeologic mapping and three-dimensional geologic modeling of glacial deposits in a multicounty area of southeastern Michigan, northeastern Indiana, and northwestern Ohio

The glacial deposits underlying southeastern Michigan, northeastern Indiana, and northwestern Ohio are a substantial source of water to communities, agriculture, and industry in the region. Previous efforts to characterize aquifer materials in the area cited a need for additional information about the underlying hydrogeologic characteristics and related groundwater availability as well as improved mapping of the extent and properties of the glacial deposits. Recent U.S. Geological Survey multi-State compilations of water-well drilling records have greatly increased access to high-resolution geologic data, particularly in glacial depositional environments. This study by the U.S. Geological Survey, in cooperation with the Ohio Environmental Protection Agency, uses processed data from the State-managed collections of well records to characterize the glacial deposits in the study area using two methods. The first method creates two-dimensional maps of basic hydrogeologic information commonly required for assessments of groundwater availability, including (1) total thickness of glacial deposits, (2) total thickness of coarse-grained deposits, (3) specific-capacity-based transmissivity and hydraulic conductivity, and (4) texture-based estimated equivalent horizontal and vertical hydraulic conductivity and transmissivity. The second method builds a hydrogeologic framework of the complex glacial aquifer through construction of a volumetric geologic model by using three-dimensional kriging. Results of the volumetric model indicate that aquifer materials are primarily concentrated in the western parts of the study area near the Indiana-Ohio border. Coarse-grained sediments are also present as surficial deposits in the north of the study area where intermixing glacial advances created complex distributions of unconsolidated deposits. Two-dimensional maps of hydrogeologic properties support the volumetric model, showing thicknesses of coarse-grained deposits that reach up to 250 feet in the western sections of the study area and progressively thin to near absence in the east. Visualization of the aquifer materials with a volumetric model generally shows a highly discontinuous distribution of coarse- and fine-grained materials, with no clearly defined boundaries to delineate the extent of the aquifer. Comparisons of cross sections derived from the volumetric model with existing published maps support previous near-surface hydrogeologic interpretations while filling gaps where data are sparse, particularly in deeper parts of the aquifer. Both the two-dimensional maps and the volumetric model provide data that can directly inform assessments of groundwater availability, in addition to having future applications to studies of groundwater flow and transport.

Indiana, Michigan, Ohio↗
USGS2026

Tephra from Kīlauea’s 2008–2018 lava lake eruption—Proximal deposits and dispersal characteristics

A network of ten buckets was established early in the 2008–2018 summit eruption at Kīlauea to collect proximal tephra ejected from the new, informally named the “Overlook crater”; the buckets were emptied on most days of the eruption thereafter. This report summarizes the results of more than 2,400 different sampling intervals (most 1–3 days long) during the eruption, focusing on the physical and dispersal characteristics of the tephra deposits. The network was within about 300 meters south of the vent to capture tephra dispersed by the dominant northeast trade wind. The juvenile tephra mainly reflected spattering at the southeast (SE) sink, a downwelling area in the southeastern part of the lava lake in the Overlook crater that remained in the same area throughout the eruption, with admixtures of solid rock and secondary minerals derived from the wall of the crater. The proportion of juvenile material to lithic material ranged widely early in the eruption but was generally greater than 90 percent for the last 6 years of the eruption as lake level rose and the crater walls decreased in height and became more stable. The accumulation rate of tephra at each bucket was strongly dependent on the location of the bucket and reflects the interplay between lava lake level and wind direction and speed. The mass per unit area (m/a) of collected tephra was a maximum of about 97 kilograms per square meter for the entire eruption, equivalent to a thickness of about 75 millimeters. Thirty-two explosive events with a volcanic explosivity index of −2 to −4 deposited much of the tephra in the network. Fifteen of these rock-fall-induced events occurred within 6 days of one another. Pele’s hair, a volcanic glass predominantly associated with quieter activity at the vent in the final half of the eruption, was dispersed more than 60 kilometers downwind from the lava lake and formed a nearly continuous deposit near the Overlook crater. This eruption was probably the most frequently sampled long-lasting eruption in history, but most of the deposits are ephemeral. The collected samples, although generally of small mass, are retained by the Hawaiian Volcano Observatory and are available for detailed study.

Hawaii↗
USGS2025

Tapwater exposures, residential risk, and mitigation in a PFAS-impacted-groundwater community

Tapwater (TW) safety and sustainability are priorities in the United States. Per/polyfluoroalkyl substance(s) (PFAS) contamination is a growing public-health concern due to prolific use, widespread TW exposures, and mounting human-health concerns. Historically-rural, actively-urbanizing communities that rely on surficial-aquifer private wells incur elevated risks of unrecognized TW exposures, including PFAS, due to limited private-well monitoring and contaminant-source proliferation in urbanizing landscapes. Here, a broad-analytical-scope TW-assessment was conducted in a hydrologically-vulnerable, Mississippi River alluvial-island community, where PFAS contamination of the shallow-alluvial drinking-water aquifer has been documented, but more comprehensive contaminant characterization to inform decision-making is currently lacking. In 2021, we analyzed 510 organics, 34 inorganics, and 3 microbial groups in 11 residential and community locations to assess (1) TW risks beyond recognized PFAS issues, (2) day-to-day and year-to-year risk variability, and (3) suitability of the underlying sandstone aquifer as an alternative source to mitigate TW-PFAS exposures. Seventy-six organics and 25 inorganics were detected. Potential human-health risks of detected TW exposures were explored based on cumulative benchmark-based toxicity quotients ( ∑ TQ ). Elevated risks ( ∑ TQ ≥ 1) from organic and inorganic contaminants were observed in all alluvial-aquifer-sourced synoptic samples but not in sandstone-aquifer-sourced samples. Repeated sampling at 3 sites over 52–55 h indicated limited variability in risk over the short-term. Comparable PFAS-specific ∑ TQ for spatial-synoptic, short-term (3 days) temporal, and long-term (3 years quarterly) temporal samples indicated that synoptic results provided useful insight into the risks of TW-PFAS exposures at French Island over the long-term. No PFAS detections in sandstone-aquifer-sourced samples over a 3 year period indicated no PFAS-associated risk and supported the sandstone aquifer as an alternative drinking-water source to mitigate community TW-PFAS exposures. This study illustrated the importance of expanded contaminant monitoring of private-well TW, beyond known concerns (in this case, PFAS), to reduce the risks of a range of unrecognized contaminant exposures.

Wisconsin↗