USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Waterway, Port, Coastal, and Ocean Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,722 records · Page 35Linked to original sources
USGS2024

Three-dimensional geologic framework model of the Rio San Jose groundwater basin and adjacent areas, New Mexico

As part of a U.S. Geological Survey study in cooperation with the Bureau of Reclamation and the Pueblo of Acoma, New Mexico, and the Pueblo of Laguna, New Mexico, a digital three-dimensional geologic framework model was constructed for the Rio San Jose and its surface-water drainage basin in west-central New Mexico. This three-dimensional model defines the altitude, thickness, and extent of 18 geologic units for use in a regional numerical hydrologic model. The model included an undifferentiated Proterozoic basement layer, 13 consolidated Paleozoic and Mesozoic rock units, and 4 Cenozoic units. Model input data were compiled from published cross sections, well data, structure contour maps, selected geophysical data, and data derived from geologic maps and structural features in the study area. These data were used to construct faulted surfaces that represent the upper and lower subsurface geologic unit boundaries. The digital three-dimensional geologic framework model combines faults, the altitude of the tops of each geologic unit, and boundary lines depicting the subsurface extent of each geologic unit. The digital three-dimensional geologic model described in this report and the corresponding data release represents the generalized geometry of the subsurface geologic units; it reproduces with reasonable accuracy the input geologic data and is consistent with previously published subsurface conceptualizations of the region. The geologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

New Mexico↗
USGS1992

Description and effects of 1988 drought on ground-water levels, streamflow, and reservoir levels in Indiana

Documentation of the 1988 drought in Indiana was undertaken to aid water-management agencies and planners concerned with periods of below-normal precipitation and their effect on commercial, agricultural, and residential water use. Precipitation, temperature, Palmer Drought Severity Indices, and ground- and surface-water levels from water years 1988 and 1989 were compared to the historical record to evaluate severity, extent, and duration of the 1988 drought in Indiana. Three types of drought-climatological, hydrologic, and agricultural--occurred in most of Indiana during water years 1988 and 1989. The drought began toward the end of calendar year 1987 as annual precipitation decreased to 4.6 inches below the long term mean. By the end of September 1988, statewide precipitation deficits had increased to almost 8 inches below normal. High temperatures during the summer months increased the stress on crops, livestock, and people. Northwest Indiana experienced the second warmest June-August on record. Palmer Drought Severity Indices indicated that a moderate-to-severe drought had occurred in Indiana during most of 1988. Ground-water levels were affected substantially in many areas of the State. Record low-water levels were observed at 12 of the 20 monitoring wells included in this report. A go-day ground-water emergency was declared in parts of northwestern Indiana. Streamflow throughout the State was affected to varying degrees by the drought. Annual mean discharge in some rivers was only slightly less than the mean annual discharge, while others flowed at less than half that value. The effects of low streamflows were felt by many as electric power plants reduced or ceased production and public-water utilities requested conservation measures by their customers. Major reservoirs in the State approached or reached record low levels, causing water supplies as well as recreational activities to be diminished. Most major crops produced in Indiana were affected by the dry conditions. Average yields in 1988 ranged from 50 to 86 percent of 1987 yields.

Indiana↗
USGS2024

Revision of ModelMuse to support the use of PEST software with MODFLOW and SUTRA models

Executive Summary ModelMuse is a graphical user interface for several groundwater modeling programs. ModelMuse was updated to generate the input files for the parameter estimation software suite PEST. The software is used with MODFLOW or SUTRA models to run PEST-based parameter estimation and display the updated model inputs after parameter estimation. The PEST input files can also be used with the PEST++ version 5 software suite. Parameter estimation typically requires defining the parameters being adjusted during calibration and observations for assessing calibration quality. After a parameter is defined in ModelMuse, it can be applied to all or part of a model dataset. Pilot points—a parameterization device that facilitates higher levels of parameterization—can be used to assign spatially variable distributions of model inputs. Parameters can be applied to temporally varying features, such as boundary conditions, by either applying them to all the values in a series in one step or by applying separate parameters to individual members of a series. ModelMuse allows the definition of many observation types from various model output files. For MODFLOW 6 and SUTRA models, new options were added to ModelMuse to allow it to display the changed input after parameter estimation is complete. For MODFLOW–2005 and MODFLOW–NWT models, ModelMuse can import an entire model for visualization. An example illustrates the use of PEST with a MODFLOW 6 model in ModelMuse.

Techniques and Methods↗
USGS1976

Hydrogeology of stratified drift in Farmington, Connecticut: Available data and future needs

The purpose of this report is twofold. The first is to update hydrogeologic information on the major stratified-drift deposits that underlie much of Farmington. The second is to outline data requirements for future ground-water evaluation and management. The scope of the report is limited to the stratified drift, as it is the only aquifer capable of sustaining large withdrawals for public or industrial supply. This aquifer is composed of interbedded layers of gravel, sand, silt and clay. Most of this material was deposited by glacial meltwaters, but locally the aquifer contains some unconsolidated deposits of nonglacial origin. The most extensive stratified-drift deposits are in the valleys of the Farmington and Pequabuck Rivers.(See plate B.) A few small areas of stratified drift near East Farmington Heights and Oakland Gardens are not discussed in this report as their potential for large-scale development is slight.

Connecticut↗
USGS2026

The use of fluorite geochemistry and machine learning to identify critical mineral systems

Fluorite (CaF 2 ) is a potential pathfinder to critical mineral and rare earth element (REE) deposits but its application has been limited to a narrow range of mineralization types. I show that fluorite is a robust recorder of mineralization fertility by applying statistical and machine-learning methods to a new global fluorite geochemical database. Distinct median rare earth and trace element patterns are observed among deposit types and genetic environments. Fluorite associated with carbonatites and REE deposits are relatively enriched in Sr and have minimal Eu anomalies. These characteristics define new bivariate discrimination diagrams that correctly identify 78% of carbonatite-related fluorite and 88% of fluorite from REE deposits. Random forest classifiers were developed for a wide range of mineralization types and genetic settings. Trained solely on rare earth element patterns, these models achieve accuracies of 77–79%. Higher classification accuracies (up to 88–96%) are obtained when including elements such as Sr, highlighting the significance of trace elements for optimal fluorite classification. The recognition of diagnostic fluorite compositional fingerprints, particularly in REE-fertile systems, underscores its potential as a pathfinder and indicator for critical mineral exploration in F-bearing environments.

Mineralium Deposita↗
USGS1999

Estimation of magnitude and frequency of floods for streams in Puerto Rico: New empirical models

Flood-peak discharges and frequencies are presented for 57 gaged sites in Puerto Rico for recurrence intervals ranging from 2 to 500 years. The log-Pearson Type III distribution, the methodology recommended by the United States Interagency Committee on Water Data, was used to determine the magnitude and frequency of floods at the gaged sites having 10 to 43 years of record. A technique is presented for estimating flood-peak discharges at recurrence intervals ranging from 2 to 500 years for unregulated streams in Puerto Rico with contributing drainage areas ranging from 0.83 to 208 square miles. Loglinear multiple regression analyses, using climatic and basin characteristics and peak-discharge data from the 57 gaged sites, were used to construct regression equations to transfer the magnitude and frequency information from gaged to ungaged sites. The equations have contributing drainage area, depth-to-rock, and mean annual rainfall as the basin and climatic characteristics in estimating flood peak discharges. Examples are given to show a step-by-step procedure in calculating a 100-year flood at a gaged site, an ungaged site, a site near a gaged location, and a site between two gaged sites.

Puerto Rico↗
USGS2024

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon↗
USGS2025

Aeromagnetic and magnetotelluric imaging of west-central Idaho and the Stibnite-Yellow Pine mining district: A regional to district perspective

Aeromagnetic and magnetotelluric (MT) data are used to better understand the geology and mineral resources near the Stibnite-Yellow Pine mining district in central Idaho. The reduced-to-pole (RTP) transformation of regional-scale aeromagnetic data shows that allochthonous island-arc rocks west of the Salmon River suture are significantly more magnetic than the Laurentian continental rocks east of the suture and that the granitoids of the Idaho batholith have moderate to low magnetization in both early, metaluminous, and late, peraluminous phases. Application of tilt derivative to aeromagnetic data highlights major crustal-scale structures. The 5-km upward continued magnetic data indicate island-arc rocks have deep magnetic sources. The 110-km-long MT profile images resistivity structure to depths around 30 km. At shallow depths, resistivity corresponds to mapped geologic units, with moderate resistivities underlying volcanic and roof-pendant metasedimentary rocks and moderate to high resistivities occurring beneath the Idaho batholith. Crustal-scale moderate resistivities beneath the suture image the results of tectonomagmatic processes that accompanied suturing and translating allochthonous terranes. Low resistivity values beneath and fringing the batholith are derived from metasedimentary rocks that may have served as a melt source and reductant during melt generation and provided metals during later ore formation. In the Stibnite-Yellow Pine mining district, a high-resolution aeromagnetic compilation is shown to correlate with mapped lithologies and mineral deposit-related structures. The RTP transform distinguishes magnetic and nonmagnetic granitoid phases of the Idaho batholith. The tilt derivative highlights metasedimentary rocks, some of which are favorable ore hosts. The Meadow Creek fault hosts the Stibnite and Hangar Flats deposits and is imaged as a magnetic low due to hydrothermal alteration. Reconstructions of magnetic anomaly offsets and orebodies indicate around 3 km of post-95 Ma dextral separation, with some or all of the offset inferred to postdate the main Au mineralization episode (61–66 Ma).

Idaho↗
USGS2024

Assessment of water levels, nitrate, and arsenic in the Carson Valley Alluvial Aquifer and the development of a data visualization tool for the Carson River Basin, Nevada

Residents of Carson Valley, Douglas County, Nevada, rely on the basin-fill alluvial aquifer underlying the valley for drinking water. Since the 1980s, groundwater levels and water-quality data have been collected to monitor the status of the aquifer system and to assist in planning efforts to address current (2024) and future demand. The U.S. Geological Survey (USGS), in cooperation with Douglas County, Nevada, evaluated trends in water levels, nitrate, and arsenic concentrations from a network of monitoring and domestic wells in Carson Valley. This work also assessed the monitoring well network to determine the suitability of wells for characterizing the occurrence of arsenic in the groundwater. Monitoring of constituents, such as nitrate and arsenic concentrations, is needed to assess changes in contaminant distribution and to evaluate the effect that changing land use and groundwater pumping has on their occurrence and transport. Results of the trend analysis indicate water levels are declining ( p <0.05) in 17 of 26 selected monitoring wells (65 percent). Areas with the largest change in water levels, with more than 20 feet of declines, were within the community areas of Johnson Lane, Ruhenstroth, South Agricultural, East Valley, and Fish Springs. Variations in water levels measured in wells from the Central Agricultural, Minden, Foothill, Alpine County (one well), and Gardnerville Ranchos areas show periods of increase and decrease over time, but they also maintain long-term declining trends ( p <0.05). Increases in nitrate concentrations in groundwater samples collected from 9 out of 14 selected monitoring wells (64 percent) are statistically significant ( p <0.05) within the Ruhenstroth, Gardnerville Ranchos, East Valley, Genoa, and Johnson Lane community areas. Samples collected from a well in Indian Hills/Jacks Valley indicated a decreasing trend in nitrate concentration over time. Nitrate concentrations in samples collected from wells in East Valley, Genoa, Johnson Lane, and Indian Hills/Jack Valley were consistently low (less than 3 milligrams per liter [mg/L]) and stable. Nitrate concentrations from selected wells in Johnson Lane and Garnerville Ranchos exceeded the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) of 10 mg/L (as nitrogen) and have trends that are increasing over time. In 2022, a sample collected from Johnson Lane had a concentration (7.3 mg/L) below the MCL with an increasing trend over time. Temporal trend analyses for groundwater arsenic concentrations in Carson Valley could not be done because of a lack of temporal data. However, using available historical data, arsenic concentrations seem to be greater in groundwater from wells located on the eastern and northern areas of the valley than in wells located on the western or southern areas. Groundwater arsenic concentrations exceed 5 micrograms per liter (μg/L) in most samples collected from wells in Johnson Lane, Airport, Central Agricultural, and East Valley areas and in many cases exceed the U.S. Environmental Protection Agency (EPA) MCL of 10 μg/L. Data indicate that groundwater from domestic wells screened at deeper intervals are likely more vulnerable to elevated arsenic concentrations than shallower wells. A groundwater network evaluation for Carson Valley identified potential modifications in the sampling locations and frequency to better understand the effect of groundwater pumping in communities where municipal and domestic demand are greatest, potentially enhancing understanding of contaminant transport in these areas. Potential modifications to the active well network include reducing the frequency of sample collection from existing network wells (6 out of 11) that have consistently shown low and stable nitrate concentrations, adding wells in areas where data are sparse, and increasing the number of wells in areas with elevated groundwater nitrate concentrations. Including the analysis of arsenic in samples from the active groundwater monitoring well network will provide more detail on the temporal and spatial variability of arsenic concentrations. A visualization tool for the Carson River Basin was developed to provide access to discrete and near real-time hydrologic and water-quality data. The Carson River Basin Hydro Mapper (CBH; U.S. Geological Survey, 2023b) shows active and historical discrete water levels measured by the USGS and the State of Nevada Division of Water Resources, discrete groundwater nitrate and arsenic concentration data collected by the USGS, near real-time streamflow, and surface water levels for select waterbodies. The hydrologic data in the CBH provides resource managers, the public, and the scientific community with an easily accessible tool to present and communicate the most up-to-date information available about local and basin-wide water resources.

Nevada↗
USGS2024

Paleoseismology of the Sawtooth fault and implications for fault behavior in the epicentral region of the 2020 Mw 6.5 Stanley, Idaho, earthquake

The 2020 moment magnitude ( M w ⁠⁠ ) 6.5 Stanley, Idaho, earthquake raised questions about the history and extent of complex faulting in the northwestern Centennial Tectonic Belt (CTB) and its relation to the Sawtooth normal fault and Eocene Trans‐Challis fault system (TCFS). To explore faulting in this area, we excavated a paleoseismic trench across the Sawtooth fault along the western margin of the CTB, and compared an early Holocene (9.1 ± 2.1 ka, 1δ ⁠ ) rupture at the site with lacustrine paleoseismic data and fault mapping in the 2020 epicentral region. We find: (1) a history of partial to full rupture of the Sawtooth fault ( M w ⁠ 6.8–7.4), (2) that shorter ruptures ( M w ≤ ⁠⁠6.9 ) are likely along distributed and discontinuous faults in the epicentral region, (3) that this complex system that hosted the 2020 earthquake is not directly linked to the Sawtooth fault, (4) that the northeast‐trending TCFS likely plays a role in controlling fault length and rupture continuity for adjacent faults, and (5) that parts of the TCFS may facilitate displacement transfer between normal faults that accommodate crustal extension and rotation. Our results help unravel complex faulting in the CTB and imply that relict structures can help inform regional seismic hazard assessments.

Idaho↗
USGS2025

Rapid fault healing from cementation controls the dynamics of deep slow slip and tremor

Despite its status as one of the most important discoveries in geophysics, the physical mechanism(s) responsible for slow slip events (SSEs) are not well understood. Here, we synthesize observations of deep SSEs in the Cascadia Subduction Zone and argue that rapid, cohesive fault strengthening may control the dynamics of deep SSEs. Cohesive strength is frequently ignored in constitutive laws used to describe fault rheology in numerical simulations of earthquakes and SSEs alike. To demonstrate its importance, we perform and analyze a suite of petrological experiments that simulate fault healing under representative pressure and temperature conditions. We show that significant cohesive strength recovery caused by dissolution-precipitation processes occurs on timescales of just a few hours. Together, our experimental and observational results support the idea that cohesion is a key component of fault strength under SSE conditions and highlight the need for its inclusion in both future experiments and numerical models of fault slip.

British Columbia, Washington↗
USGS2025

Capturing the uncertainty of seismicity observations in earthquake rate estimates: Implications for probabilistic seismic hazard analysis and the USGS National Seismic Hazard Model

The rate of earthquakes in a region is a fundamental input to Probabilistic Seismic Hazard Analysis. We present a Monte Carlo method for computing that rate from seismicity catalogs while including a range of data and analysis uncertainties. This method is applied to regions for which the b value is assumed to be spatially invariant. Each region is broken down into epochs for which each epoch is estimated to have a uniform magnitude of completeness ( ⁠⁠ M c ). The distribution of earthquake rates for M ≥ M c is determined for each epoch by considering the Poisson likelihood of rates given the number of observed earthquakes with M ≥ M c ⁠ . We use a Monte Carlo process to include the uncertainty in b , ⁠ M c , and individual event magnitudes. The result for each epoch is the joint distribution of the Poisson rate of earthquakes with magnitudes larger than the minimum value used to calculate hazard ( ⁠⁠ M 1 ) and the Gutenberg–Richter b values, which control the extrapolation to other magnitudes. The rate for each region is either the duration‐weighted average over the epochs or, to better capture temporal variations, we also consider mixture models. The mixture models also provide an avenue to allow temporal variations in b values. To implement this joint distribution in a logic tree, we use the mean and 95% confidence branches, each of which is parameterized with an M ≥ M 1 rate and b value. We explore different ways of defining those branches, as well as non‐Gutenberg–Richter branches, and their impact on hazard estimates. The mean hazard, but not the fractiles, is robust with respect to these choices. To illustrate these new methods, we use synthetic data and catalogs from recent U.S. Geological Survey National Seismic Hazard Models for the Central and Eastern United States and for Puerto Rico and the U.S. Virgin Islands.

central and eastern United States, Puerto Rico, U.↗
USGS2024

Temporal, spatial, and chemical evolution of Quaternary high-silica rhyolites in the Mineral Mountains, Utah

The Mineral Mountains in southwestern Utah are a structurally controlled core complex at the confluence of the Colorado Plateau and the Basin and Range physiographic provinces. Aside from hosting Utah’s largest batholith, the Mineral Mountains host some of the State’s youngest high-silica rhyolites, which have been linked to a magma source that is presently being utilized as an enhanced geothermal system. The high-silica rhyolites take the form of effusive lavas and domes, and explosive products are rare. Previous K-Ar dating of these Pleistocene rhyolites placed eruptions between about 790 and 500 kilo-annum (ka) with contemporaneous basalts erupting in the valley to the east of the Mineral Mountains. Large uncertainties on these ages obscured the tempo of eruptions and thus hindered attempts to constrain the timescales of the petrogenetic processes that produced the rhyolites. In this study, we build on previous studies conducted in the 1970s and 1980s by using new geochronologic and geochemical data to investigate the temporal and spatial evolution of the youngest phase of volcanism in the Mineral Mountains. We identify two major eruptive periods, from approximately 850 to 750 ka and from approximately 590 to 480 ka. The older phase is characterized by the eruption of several basaltic lavas, two obsidian flows, and a series of coalescing porphyritic rhyolite domes. The younger phase included the eruption of six evolved high-silica rhyolite domes and one pyroclastic deposit, followed by the eruption of trachyandesite in the adjacent valley to the east. Whole-rock geochemical data indicate that the rhyolites can be divided into three chemical groups, with more evolved compositions erupting through time. The youngest rhyolites along the range crest have the lowest total iron and TiO 2 concentrations and the highest incompatible element concentrations, indicative of increasing differentiation with time and elevation. Improved precision on the eruption ages indicates a recurrence interval of approximately 20 thousand years. The eruptive flux for both periods of rhyolitic volcanism is about 0.01 cubic kilometers per thousand years, which is less than the magma resurgence flux rates for syn-caldera and post-caldera eruptions of the Valles Caldera and Yellowstone Caldera volcanic systems. Collectively, these geochemical, geochronological, and volumetric data may facilitate a better understanding of heat flux and the longevity of magmatic sources related to geothermal resources in similar small-volume, silicic systems.

Utah↗
USGS2024

Formation of vertical columnar seismic structures and seafloor depressions by groundwater discharge in the drowned Miami Terrace platform and overlying deep-water carbonates, southeastern Florida

The presence of vertical cross-formational fluid migration passageways within sedimentary basins can profoundly impact aquifer and reservoir fluid-flow and their identification is fundamental to informing management of subsurface fluid resources (groundwater, oil, gas). In an onshore and offshore southeastern part of Florida, 2D/3D seismic-reflection and bathymetry data document ∼153 vertical columnar structures composed of reflection disruptions up to 790 m in the height and averaging 360 m in diameter, and ∼219 subcircular to circular seafloor depressions up to 1334 m wide. Our study focuses on these features found within the offshore shallow-marine carbonate Miami Terrace platform, which drowned approximately at the end of the middle Miocene, and within overlying Plio-Quaternary deep-water carbonate slope and drift deposits. Most columnar structures are rooted in stratiform aquifers of the Miami Terrace platform and associated with faults or fault intersections produced by Eocene and circa late Miocene tectonics. The columns commonly terminate within the platform or as subcircular depressions along an amalgamated karstic and drowning unconformity at the platform top. The columns typically stretch upwards from a zone of deep karst cavity collapse through the Miami Terrace platform with upward decreasing sag on internal reflections. Following drowning and Plio-Quaternary partial burial of the Miami Terrace platform by deep-water deposits, the subcircular depressions and faults along the platform top were points of origin for a second phase of column growth upward into the deep-water deposits. The continuation of deep platform cavity collapse and column evolution produced pockmarks along paleo-seafloors within the deep-water deposits and at the present-day sea floor. The Plio-Quaternary pockmarks formed at water depths too deep to suggest an origin related to meteoric karst above or near sea level, but rather their formation is suggested to be related to cyclic sea level falls that drove increased groundwater head and density gradients, and seafloor discharge of offshore freshened groundwater sourced from the underlying platform. Plausibly, mixing of freshened groundwater and seawater at the seafloor discharge sites drove dissolution of the host deep-water deposits, which together with erosion by groundwater venting and current scouring formed the pockmarks. Seaward of the Plio-Quaternary seafloor pockmarks, at the late-middle Miocene upper slope of the Miami Terrace platform and along the regional karst/drowning unconformity is a slope-parallel band of ∼189 densely distributed subcircular seafloor depressions with diameters up to 1334 m at water depths up to ∼660 m. It is plausible that along the upper slope, faults and fractures produced by gravity-driven slope instability and possibly tectonics formed a dense network of fluid passageways that promoted upward artesian freshened groundwater flow to sites of discharge where mixing with seawater generated limestone dissolution and the depressions. But tectonic uplift may have forced emersion and initial meteoric sinkhole formation circa late Miocene with later enhancement by freshened groundwater discharge and bottom current erosion.

Florida↗
USGS1976

Water-quality study of a reach of the Merced River in Yosemite National Park and vicinity, California, April 1973 through September 1974

A 25-mile (40-kilometre) reach of the Merced River was studied to provide the National Park Service with water-quality data prior to the operation of a new sewage-treatment plant. Data were collected periodically at four Merced River and two inflow stations. Discharge varied seasonally with highest flow occurring at the time of spring snowmelt runoff. Lowest flow occurred during late summer, coinciding with high park visitor use and elevated water temperature. Water-quality variables investigated were discharge, temperature, major chemical constituents, selected trace metals, specific conductance, suspended sediment, turbidity, dissolved oxygen, pH, alkalinity, carbon dioxide, total organic carbon, nitrogen, phosphorus, algal growth potential, coliform bacteria, periphyton, and benthic invertebrates. Diel measurements were made at some stations to delineate daily fluctuations in selected water-quality variables. Results indicate that water in the reach of the Merced River studied was of good quality. The river had low concentrations of dissolved solids (8 to 41 milligrams per litre) and low alkalinity values (2 to 24 milligrams per litre of alkalinity as CaCO 3 ). Mean concentrations of nitrogen and phosphorus were highest in the Merced River at Rancheria Flat. Algal growth potential tests showed that phosphorus was limiting algal growth at Happy Isles Bridge, El Capitan Bridge, and South Fork Merced River, whereas nitrogen was limiting growth at Rancheria Flat. Input of excessive nitrogen and phosphorus concentrations in the Merced River during the summer low-flow period, and mixing with warm tributary inflow could cause excessive algal growth and production. The algal types found were diatoms, green algae, and blue-green algae. Biomass/chlorophyll a ratios in the Merced River were low (0.3 to 7.7). Benthic invertebrates consisted chiefly of Diptera, Ephemeroptera, and Plecoptera.

California↗
USGS2024

Produced water geochemistry from hydraulically stimulated Niobrara Formation petroleum wells: Origin of salinity and temporal perspectives on treatment and reuse

Produced water (i.e., a mixture of returned injection fluids and geologic formation brines) represents the largest volumetric waste stream associated with petroleum production in the United States. As such, produced water has been the focus of intense study with emphasis on understanding the geologic origin of the fluids, environmental impacts of unintended or intentional release, disposal concerns, and their commodity (e.g., lithium) potential. However, produced water geochemistry from many active petroleum plays remain poorly constrained leading to knowledge gaps associated with the origin of brine salinity and parameters (e.g., radium levels) that can impact treatment, disposal, and possible reuse. Here we evaluate the major ion geochemistry, radium concentrations, and stable water isotope composition of ~120 produced water samples collected from 17 producing unconventional petroleum wells in Weld County, Colorado from the Late Cretaceous Niobrara Formation. This sample set encompasses eight produced water time series from four new wells across production days 0 to ~365 and from four established wells across production days ~1000 to ~1700. Additionally, produced water from nine other established Niobrara Formation wells were sampled at discrete time points ranging from day 458 to day 2256, as well as hydraulic fracturing input fluids. These results expand the available Niobrara Formation produced water geochemical data, previously limited to few wells sampled within the first year of production, allowing for the heterogeneity of major ions and radium to be evaluated. Furthermore, we explore the geochemical relationships between major ion ratios and stable water isotope composition to understand the origin of salinity in Niobrara Formation brines from the Denver-Julesburg Basin. These findings are discussed with perspective toward potential treatment and reuse of Niobrara produced water prior to disposal.

Colorado, Nebraska, Wyoming↗
USGS2024

Preliminary ground and airborne-based geophysical mapping and modelling of an active hydrothermal system at Mammoth Lakes, California

Mammoth Lakes, California hosts a productive hydrothermal system within the seismically active south moat of Long Valley Caldera. Surficial evidence of the shallow hydrothermal system includes discrete zones of tree-kill dispersed between Shady Rest Park and the Casa Diablo Geothermal Power Plant (40 MW), as well as east of the power plant. The tree-kill areas are associated with elevated diffuse CO₂ emissions, heated ground, hydrothermal alteration, diffuse soil H₂S emissions, and gas vents. Previous mapping delineates prominent north and northwest trending structures within the south moat along the southwestern edge of the resurgent dome that may accommodate gas and fluid flow at the Shady Rest Park and Basalt Canyon Tree Kill Areas (SRTKA and BCTKA, respectively). Both tree-kill areas are also located along contacts between resurgent rhyolite, mafic lavas, and surficial deposits which may provide additional pathways for gas and fluid migration in the shallow subsurface. Characterizing structure and lithology using geophysical anomalies is critical to determining primary structural controls on the hydrothermal system and the extent of subsurface alteration at these sites. We conducted ground and airborne-based potential field geophysical surveys to map gravity and magnetic anomalies. These anomalies are then used to model subsurface geology, structure, and hydrothermal alteration. Here we present our preliminary geophysical mapping and modelling results at both tree-kill locations. Gravity and magnetic data suggest complex structural intersections are coincident with heated ground and gas emissions at the SRTKA and BCTKA. Hydrothermal systems are often observed or interpreted to exploit fault intersections which can serve as highly permeable pathways for hydrothermal fluid and gas discharge, enabling economic geothermal energy production. Geophysical mapping and modelling are an effective means of investigating such structural complexity at Mammoth Lakes due to the presence of unidentified and concealed structures.

California↗