USGS Science⌕ Search

SEARCH · USGS Science

Results for “JGR Earth Surface”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

641 records · Page 35Linked to original sources
USGS2025

Widespread occurrence of former anhydrite phenocrysts in Laramide-age magmas related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, USA

Reports of magmatic anhydrite are relatively rare, with only ~30 occurrences documented worldwide so far. However, magmatic anhydrite saturation is difficult to recognize because anhydrite decomposes rapidly in near-surface environments. In most cases, only anhydrite inclusions shielded within other phenocryst phases were able to survive. Alternatively, since anhydrite phenocrysts preserved in fresh volcanic rocks are characteristically intergrown with apatite phenocrysts, the former presence of anhydrite phenocrysts can be recognized based on the occurrence of lath-shaped cavities that show a strong spatial association with apatite phenocrysts. These cavities can be either empty or filled with low-temperature, secondary minerals such as zeolites, carbonates, or microcrystalline silica. A systematic search for the occurrence of such cavities, combined with optical and Raman-spectroscopic identification of anhydrite inclusions preserved within apatite, hornblende and quartz phenocrysts, demonstrates that most of the Laramide-age magmas associated with the Santa Rita and Hanover-Fierro porphyry-skarn Cu (Zn, Mo, Au, Pb) deposits were saturated in magmatic anhydrite. The anhydrite typically coexisted with monosulfide solid solution (MSS), suggesting oxygen fugacities of ~2.0±0.5 log units above the fayalite-magnetite-quartz buffer. The magmas range from andesitic to rhyodacitic in composition, and from shortly pre-mineralization (~61 Ma) to shortly post-mineralization (~57 Ma) in age. In three samples with particularly well-recognizable former anhydrite phenocrysts, their modal abundance could be quantified based on high-resolution scans of polished hand specimens. The observed modal anhydrite abundances of 0.63–1.8 vol% translate into minimum magma sulfur contents of 0.20–0.56 wt% S. The highest sulfur content of 0.56 wt% S is difficult to reconcile with available anhydrite solubility models, but it could be reproduced in an anhydrite solubility experiment performed at 950 °C and 1.15 GPa on a natural latite containing 13.1 wt% dissolved H2O. The sample with the second-highest sulfur content of 0.26 wt% S requires ~10 wt% H2O in the silicate melt, and, consequently, a minimum pressure of ~0.5 GPa. Taken together, the results suggest that the magmas of the Central Mining District were extremely hydrous and thus originated from great depth. Indeed, their major element compositions and reconstructed H2O and S contents agree well with experimentally observed and numerically predicted compositions of residual silicate melts after 50–70 wt% crystallization of ordinary arc basalts at high pressure and high oxygen fugacities.

New Mexico↗
USGS2025

Structural setting and geothermal potential of northeastern Reese River Valley, north-central Nevada: Highly prospective detailed study site for the INGENIOUS project

The northeastern part of the Reese River basin situated ~15 km southeast of Battle Mountain, Nevada, scored highly in the Nevada geothermal play fairway analysis (PFA) for hosting potential hidden geothermal systems. This site (also referred to as Argenta Rise) was therefore chosen for detailed study in the INGENIOUS project (INnovative Geothermal Exploration through Novel Investigations Of Undiscovered Systems). The high PFA scores resulted primarily from favorable structural settings (e.g., fault intersections and pull aparts) with relatively high slip rates on Quaternary faults. The INGENIOUS project is utilizing additional parameters and more rigorous analytical techniques to further advance exploration at this site. This includes integration of geological (e.g., Quaternary fault mapping) and new geophysical datasets (e.g., gravity, magnetics, MT data, and five reprocessed seismic reflection profiles) to build a structural model and to identify specific favorable sites for potential geothermal upwellings. Two-meter temperature surveys were also conducted in the area (139 measurements). This part of north-central Nevada is characterized by systems of intersecting northerly and ENE-striking faults within the broader Humboldt structural zone, a poorly understood belt of ENE-striking faults and relatively high heat flow extending across northern Nevada. Kinematic analysis of exposed fault surfaces shows that ENE-striking faults have accommodated sinistral-normal slip, and normal slip characterizes N- to NNE-striking faults. Northeastern Reese River Valley lies within a broad left step between major ENE-striking fault zones on the northern flanks of the Argenta Rim and Shoshone Range and thus corresponds to a broad pull-apart in the ENE-striking sinistral-normal fault system. Notably, the nearby Beowawe geothermal system in Whirlwind Valley (with abundant sinter, hot springs, and a geothermal power plant) occupies a fault intersection in a relatively small left step in a major ENE-striking sinistral-normal fault and may serve as an analogue for a potential hidden system in northeastern Reese River Valley. Existing geological maps, high-resolution lidar, and seismic reflection data demonstrate that northeastern Reese River Valley is structurally complex with multiple intersections between the ENE- and N- to NNE-striking fault systems. Some of these fault intersections correspond to low resistivity anomalies, magnetic lows, and/or very subtle 2-m temperature anomalies, which may indicate hidden geothermal upwellings. Three-dimensional modeling and temperature-gradient drilling are planned to further evaluate these sites for geothermal activity.

Nevada↗
USGS2025

Geologic map of the Guinevere Planitia quadrangle (V–30), Venus

This 1:5,000,000-scale geologic map of the Guinevere Planitia quadrangle divides the region into 15 geologic material units, defined using Magellan synthetic aperture radar (12.6-centimeter-wavelength radar system; 75 meters per pixel) datasets and including upland terrain units (2.4 percent of the surface area), plains materials units (59 percent), flow materials associated with named and unnamed eruptive centers (37.2 percent), small volcanic edifices, and impact crater materials (1.4 percent). Upland terrain units consist of tessera and lineated upland material, plains materials consist of Guinevere regional plains and Guinevere lineated and mottled plains, and flow materials consist of lobate flow material and plains-forming flow material. Specific lobate flows associated with Atanua Mons, Tuli Mons, Var Mons, and Uilata Fluctus are mapped separately. Other mapped units are impact crater material and small volcanic edifice. In addition to geologic units, we mapped linear features that show patterns of deformation or flow across the quadrangle. These consist of faults, wrinkle ridges, broad arches, channels, troughs, and flow direction indicators. The map region also contains several small volcanic features: shields, depressions, and craters. These, in combination with the plains, large volcanoes, and coronae, show the pervasive influence of volcanism across Venusian lowlands. The rims of nine identified impact features are delineated; large bright and dark haloes, which in some cases are associated with individual impact craters, are mapped as surficial mantling deposits. We documented spatial relationships using the stratigraphic and cross-cutting relationships of the quadrangle’s geologic units and features to provide a synthesis of the region’s geologic history. The upland terrain of the quadrangle indicates intense tectonic deformation and uplift. It is exposed as embayed remnants, typically within the plains, and represents the oldest geologic materials locally and across the region. Guinevere plains and the plains-forming flow unit appear to be assemblages of volcanic flows from multiple sources, including distinct coronae and corona-like structures. The temporal evolution of Guinevere lineated and mottled plains was likely protracted, with continued formation of small volcanic edifices over a long period. The morphologic and radar brightness characteristics of volcanoes in the region indicate their growth may have involved (1) multiple large-scale eruptive centers with recognizable spatial and temporal sequences, (2) extensive lava flow fields with a multitude of flows producing complex, overlapping patterns, and (3) numerous small volcanic edifices, including shields, domes, and cones. Although geologic patterns common to other regions of Venus are evident in the Guinevere Planitia quadrangle, local relative age relationships are inconsistent or unclear, preventing robust stratigraphic correlation. The mapping results do, however, indicate complicated local sequences of volcanic and tectonic activity.

Scientific Investigations Map↗
USGS2023

Explosive trachyte eruptions from the Al Efairia volcanic center in northern Harrat Rahat, Kingdom of Saudi Arabia

Harrat Rahat is an alkali basalt, continental, intraplate volcanic field located within the central-western part of the Kingdom of Saudi Arabia. The northern quarter of Harrat Rahat contains evolved volcanic products that achieve trachyte compositions (>60 weight percent SiO 2 ). Within the Al Efairia volcanic center, pyroclastic-flow and -surge deposits that reflect explosive trachyte volcanism (and minor exposed lava domes that reflect effusive trachyte eruptions) sit at the surface as the youngest expression of volcanic activity within this part of the Harrat Rahat volcanic field. Five trachyte deposits emplaced explosively have been identified within the Al Efairia volcanic center based on geologic mapping, petrography, geochemistry, and paleomagnetism. These units are the trachytes of Um Rgaibah, Gura 5, Gura 4, Al Efairia, and Al Qayf, in descending stratigraphic order. Here, we present 14 40 Ar/ 39 Ar analyses from four of these units, which yield eruption ages of 4.2±5.2 thousand years (ka) for the trachyte of Um Rgaibah, 79.7±1.6 ka for the trachyte of Gura 5, 84.3±1.6 ka for the trachyte of Gura 4, and 88.0±1.8 ka for the trachyte of Al Efairia. The eruption age of the trachyte of Al Qayf has been constrained to between 410.3±3.4 and 418.8±1.9 ka using paleomagnetic correlations and 40 Ar/ 39 Ar ages from overlying and underlying intermediate composition lava flows. Most of these trachytes have distinct geochemical compositions, petrographic characteristics, and directions of remanent magnetization. The exceptions are for the trachytes of Gura 4 and Gura 5, which overlap in their geochemical, petrographic, paleomagnetic, and geochronologic affinities. Based on these similarities, we interpret the trachytes of Gura 4 and Gura 5 to have erupted during a closely spaced (a few decades) time interval from the same magma batch but from craters that are >2 kilometers (km) apart. The eruption of the trachyte of Al Efairia at 88.0±1.8 ka is the result of a different magma batch that erupted a few thousand years prior to the trachytes of Gura 4 and Gura 5. The Al Efairia volcanic center is remarkably different from the Matan volcanic center located ~10 km to the north, which has also erupted young (<150 ka) trachytes. The Matan volcanic center has been shown to produce trachyte compositions only after eruption of basalt followed by intermediate lava flows, whereas only trachyte compositions have erupted within the Al Efairia volcanic center over this same time interval.

Al Efairia volcanic center, Harrat Rahat↗
USGS2025

Spatiotemporal variability of algal biomass and nitrate in Owasco and Seneca Lakes in the Finger Lakes Region, New York, in 2019

Cyanobacterial harmful algal blooms (CyanoHABs) have become increasingly common, threatening the security of water resources globally. The U.S. Geological Survey conducted high-resolution nearshore mapping surveys using boat-mounted multiparameter sondes and nitrate sensors during the summer and fall of 2019 on Owasco Lake and Seneca Lake, two lakes with documented CyanoHABs in the Finger Lakes region of New York State. Discrete sensor measurements and water-quality samples were collected at fixed points along survey routes and continuous data were generated at open-water monitoring platforms. This investigation examined whether water-quality information from nearshore surveys was representative of open-water conditions and if nearshore surveys could be used to identify areas with localized nearshore CyanoHABs and potential sources of nutrients not captured by tributary sampling. In addition to comparisons across methods, nearshore concentrations of nitrate and chlorophyll were evaluated relative to tributary outlets, cyanobacterial abundance and biovolume at discrete locations, and the locations of near-surface CyanoHABs that were designated as “confirmed with high toxins” by the New York State Department of Environmental Conservation. Nitrate and chlorophyll concentrations were comparable across methods for each lake, although concentration ranges were typically higher for nearshore mapping datasets than for nearshore discrete datasets. Nearshore surveys indicated areas of nitrate enrichment that varied temporally in both lakes. Orthophosphate was not routinely detected. Across methods, median chlorophyll concentrations were higher for the summer survey than for the fall survey in Owasco Lake. Nearshore chlorophyll concentrations varied more temporally in Owasco Lake than in Seneca Lake. Phytoplankton and cyanobacterial abundance and biovolume were about five times higher in Owasco Lake than in Seneca Lake. Cyanobacteria dominated the phytoplankton community in most samples, and Microcystis comprised the bulk of the cyanobacterial biovolume. The most abundant potential cyanotoxin-producing (specifically microcystins) genera were Microcystis , Synechococcus , Aphanocapsa , and Pseudanabaena . The cyanobacterial community composition was comparable between open-water monitoring platforms and nearshore samples. Microcystins were detected in seven survey samples from Owasco Lake, in one survey sample from Seneca Lake, and in one sample each from the open-water monitoring platforms on Owasco and Seneca Lakes that were collected about 7 days before the fall surveys. Microcystin detections were not consistently associated with high cyanobacterial cell counts or cyanotoxin-producing genera. Results from nearshore surveys were comparable to open-water monitoring platforms and discrete nearshore observations in the absence of nearshore or open-water CyanoHABs in these systems during the study. Patterns of nearshore concentrations of nitrate and chlorophyll from nearshore surveys may aid in the identification of areas with localized nitrate loading and shifts in phytoplankton abundance and community composition.

New York↗
USGS1993

Ground-water quality near an inactive landfill and sludge-spreading area, Tallahassee, Florida

Ground-water quality of a 120-acre area encompassing an inactive landfill southwest of Tallahassee, Florida, was assessed by installing and sampling 21 monitoring wells. Sludge from a municipal sewage-treatment plant was also applied to the land surface near the landfill site. Water samples were collected from the 21 monitoring wells from June 1987 through September 1990 and analyzed for concentrations of major ions, nitrogen species, trace metals, field measurements, and more than 140 organic constituents. Water quality in the Upper Floridan aquifer at the study site was compared to background water quality in other areas of Leon County. Ground-water quality of the study site was evaluated by the location of wells sampled in relation to the landfill and the sludge-spreading areas. Results of nonparametric statistical analysis indicated that potassium and nitrite plus nitrate as nitrogen concentrations in water samples from wells completed in the Upper Floridan aquifer at the study site were significantly different at the 5 percent probability level from those in samples from background wells completed in this aquifer in Leon County. Median potassium concentrations were 0.4 mg/L (milligrams per liter) in water from wells at the study site and 0.7 mg/L in water from background wells in Leon County. Median nitrite plus nitrate concentrations were 6.48 mg/L in water samples from wells at the study site and 0.51 mg/L in water samples from background wells. Graphical comparison of the water quality characteristics in water from six categories of wells; upgradient, landfill, adjacent to the landfill, downgradient onsite, downgradient offsite, and background Leon County, indicated that sodium, bicarbonate, sulfate, iron, manganese, and dissolved solids concentrations and specific conductance values were highest within the landfill. Upgradient and downgradient well categories include wells in areas affected by sludge spreading. Localized reducing conditions were indicated in a downgradient area by median iron concentrations of 930 and 30 ug/L (micrograms per liter) in samples from wells only 5 feet apart. Nitrite plus nitrate concentrations were lowest in water from wells in the landfill compared to water from the other categories. Concentrations of most trace elements and organic compounds were mostly below detection limits, although State maximum contaminant levels of 1 ug/L for benzene and vinyl chloride and 3 ug/L for tetrachloroethene were exceeded in 14 samples. Concentrations of sodium, potassium, chloride, sulfate, nitrite plus nitrate, total organic and ammonia nitrogen, and ammonia nitrogen in ground water were statistically analyzed in areas affected by sludge-spreading and other areas. Only nitrite plus nitrate and chloride concentrations were significantly different between the two areas. Median nitrite plus nitrate and chloride concentrations in sludge-spreading areas were 6.9 mg/L and 2.9 mg/L, respectively, compared to 1.1 mg/L and 1.8 mg/L in other areas.

Florida↗
USGS2023

Eruptive history of northern Harrat Rahat—Volume, timing, and composition of volcanism over the past 1.2 million years

Harrat Rahat, one of several large, basalt-dominated volcanic fields in the western part of the Kingdom of Saudi Arabia, is a prime example of continental, intraplate volcanism. Excellent exposure makes this an outstanding site to investigate changing volcanic flux and composition through time. We present 93 40 Ar/ 39 Ar ages and 6 36 Cl surface-exposure ages for volcanic deposits throughout northern Harrat Rahat that, integrated with a new geologic map, define 12 eruptive stages. Exposed volcanic deposits in the study area erupted less than 1.2 million years ago (Ma), and 214 of 234 identified eruptions occurred less than 570 thousand years ago (ka). Two eruptions were in the Holocene, including a historically described basaltic eruption in 1256 C.E. and a trachyte eruption newly recognized as Holocene (4.2±5.2 ka). An estimated approximately 82 cubic kilometers (km 3 ; dense rock equivalent) of volcanic products can be documented as having erupted since 1.2 Ma, though this is a lower limit because of concealment of deposits older than 570 ka. Over the last 570 thousand years (k.y.), the average eruption rate was 0.14 cubic kilometers per thousand years (km 3 /k.y.), but volcanism was episodic with periods alternating between low (0.04–0.06 km 3 /k.y.) and high (0.1–0.3 km 3 /k.y.) effusion rates. Before 180 ka, eruptions vented from the volcanic field’s dominant eastern vent axis and from a subsidiary, diffuse, western vent axis. After 180 ka, volcanism focused along the eastern vent axis, and the composition of volcanism varied systematically along its length from basalt dominated in the north to trachyte dominated in the south. We hypothesize that these compositional variations younger than 180 k.y. reflect the growth of a mafic intrusive complex beneath the southern part of the vent axis, which led to the development of evolved magmas. Lastly, these new age data allow for a reassessment of the volcanic recurrence interval at northern Harrat Rahat. Based on available data, volcanism in northern Harrat Rahat over the last 180 k.y. is poorly described using a Poisson distribution with a single recurrence interval. Instead, data for northern Harrat Rahat are better described using a mixed exponential distribution that is applicable for volcanic systems characterized by two different eruptive states, where one state with a longer recurrence interval corresponding to periods of low eruption frequency and one state with a shorter recurrence interval corresponding to periods of high eruption frequency. The preferred model for northern Harrat Rahat over the last 180 k.y. uses a long recurrence interval of 4.0 k.y. and a short recurrence interval of 0.22 k.y.

Professional Paper↗
USGS2024

The EnMAP spaceborne imaging spectroscopy mission: Initial scientific results two years after launch

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80° N to 80° S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

Remote Sensing of Environment↗
USGS1992

Nonpoint-source pollutant discharges of the three major tributaries to Reelfoot Lake, west Tennessee, October 1987-September 1989

An investigation of the concentration and loads of nitrogen, phosphorus, and suspended sediment in storm runoff to Reelfoot Lake, in western Tennessee, was conducted from October 1987 through September 1989. Concentrations of selected herbicides also were defined. Reelfoot Lake, with a surface area of about 15,500 acres, is the largest natural lake in Tennessee and an important recreation and fisheries resource. Previous studies showed that the lake is hypereutrophic, a condition caused by high concentrations of nutrients in water and sediments discharged from the three principal tributaries (South Reelfoot Creek, North Reelfoot Creek, and Running Slough) to the lake. Pesticides, including herbicides, have been detected in the lake's bottom sediments. Storm runoff contributed about 87percent of the total water discharge of the three main tributaries to Reelfoot Lake. South Reelfoot Creek contributed about 4.7 tons per acre per year of suspended sediment, while North Reelfoot Creek contributed about 1.9 tons per acre per year. Running Slough contributed only about 0.31 ton per acre per year of suspended sediment. Most of the suspended sediment was transported by storm runoff between October and March. About 80 percent of the annual streamflow of the three tributaries occurs during these months. The North Reelfoot Creek basin contributed 8.2 pounds per acre per year of total nitrogen and 2.4 pounds per acre per year of total phosphorus. South Reelfoot Creek basin contributed about 6.5 and 1.3 pounds per acre per year of total nitrogen and phosphorus, respectively, while Running Slough basin contributions were 3.4 and 0.86 pounds per acre per year, respectively. The differences in nutrient yields appear to result from more row-crop agriculture and the relatively steeply sloping agricultural land in the North Reelfoot Creek basin. Ninety-one percent of the total nitrogen load and 95 percent of the total phosphorus load in the three streams was transported by storm runoff. Significant differences in the mean concentrations of nutrients in runoff were defined between the active agricultural months (April through September) and the inactive months (October through March). Storm-runoff samples were analyzed for II selected triazine herbicides. Alachlor and atrazine were the most commonly detected herbicides. Thirty-two percent of the samples contained detectable levels of alachlor and 93 percent of the samples contained detectable levels of atrazine. Ninety percent of the samples collected during the active agricultural months contained detectable leveki of alachlor and all 29 samples contained detectable levels of atrazine. Sixteen samples exceeded lifetime health-advisory levels for atrazine in drinking water (3 micrograms per liter); two samples collected from the April IS, 1988, storm at North Reelfoot Creek and South Reelfoot Creek contained 42 and 57 micrograms per liter of atrazine, respectively. Concentrations of the other nine triazine herbicides were generally less than the level of detection (0.1 microgram per liter).

Tennessee↗
USGS2026

Groundwater-level elevations in the bedrock aquifers of the Denver Basin aquifer system, Elbert County, Colorado, 2015–23

Water users in Elbert County, Colorado, rely on groundwater from bedrock aquifers in the Denver Basin aquifer system (upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers) for approximately half of their water uses. Withdrawals from the bedrocks aquifers have increased to meet the water use needs of expanding regional population growth and development. The U.S. Geological Survey, in cooperation with the Elbert County Board of County Commissioners, began a study in 2015 to monitor groundwater levels within Elbert County. The primary purpose of this report is to present a summary of groundwater levels measured during the study period (2015–23) and present results from statistical analyses of changes in groundwater-level elevations through time. Discrete groundwater levels were measured at 36 wells within Elbert County. Seven of those wells contained equipment to make and record continuous groundwater-level measurements at hourly intervals. All aquifers, except the lower Dawson aquifer, had only declining groundwater-level elevations in discrete measurements for wells with statistically significant trends. Of the eight statistically significant trends in the lower Dawson aquifer, two wells indicated increasing groundwater-level elevation from discrete measurements. The groundwater-level elevation trend medians in the upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers were −0.23, −0.66, −0.64, −0.39, and −0.63 feet per year, respectively, for discrete groundwater-level elevation measurements. Trends in continuous groundwater-level elevations were in agreement with statistically significant trends in discrete groundwater-level elevations for all wells. The groundwater-level elevation trend medians in this study, compared to the overall trends in a 2015−2018 study, both indicated declining groundwater-level elevations except in the upper Dawson aquifer, where the trend direction was opposite, a positive trend from 2015 to 2018 and a negative trend (declining groundwater elevations) from 2015 to 2023. The change in trends within the upper Dawson aquifer may be affected by differences in the study period and the trend analysis applied. Trends during the 2015–23 study period were compared to departures from the median 2015 groundwater-level elevation for each site in each aquifer. In general, the departures from the 2015 median supported trends observed at each site and correlated spatially with greater departures near the western border of Elbert County. Additionally, 30-year precipitation data showing wet and dry periods were overlaid with the departure from the 2015 median to assess groundwater-level patterns in wells in the five aquifers. Departures from the 2015 median groundwater-level elevations appeared greatest during the dry period between 2020 and 2023. Potentiometric-surface maps of the upper and lower Dawson aquifers created from static April 2023 groundwater elevations indicated groundwater-flow direction is generally from the south to the north. Results of this study could be used to guide additional groundwater monitoring in Elbert County and could aid in long-term planning of water resources.

Colorado↗
USGS2024

Post-wildfire debris flows

Post-wildfire debris flows pose severe hazards to communities and infrastructure near and within recently burned mountainous terrain. Intense heat of wildfires changes the runoff characteristics of a watershed by combusting the vegetative canopy, litter, and duff, introducing ash into the soil and creating water repellant soils. Following wildfire, rainfall on bare ground is less able to infiltrate into the fire-altered soils and overland flow is less impeded by vegetation. Rainfall runoff in recently burned areas can erode hillslopes owing to the removal of soil binding organic matter near the soil surface by fire. In channels, loose, dry-ravel deposits composed of sand and gravel are readily entrained by concentrated runoff in channels. Entrainment of soil on hillslopes and in channels bulks up the sediment concentration of the rainfall runoff to generate debris flows capable of transporting boulders and large woody debris. Post-wildfire debris flows can be triggered by rainfall conditions that would typically produce little runoff during unburned conditions. The primary rainfall trigger for post-wildfire debris flows is high intensity rainfall during short duration convective rainstorms or periods of high rainfall intensity embedded within a long-duration frontal storm. Numerous observations of debris flows triggered by storms lasting less than an hour following periods of little to no rainfall indicate that antecedent rainfall is not a requirement for initiation of post-wildfire debris flows. Post-wildfire debris-flow hazard assessment entails estimating probability and magnitude of debris flows in the burned area, estimating debris-flow runout and intensity, and defining rainfall intensity-duration thresholds for debris-flow initiation. In the United States, probability and magnitude is estimated using empirically derived models largely based on data collected in southern California. The models provide maps to identify watersheds and drainage paths where post-wildfire hazards are most pronounced. Rainfall intensity-duration thresholds can be incorporated into flood hazard forecasting tools. Currently, work is underway to identify how to best implement debris-flow runout models in burned areas with efficiency and accuracy. Post-wildfire debris flows have been a long-recognized process in the Transverse Ranges of southern California; however, climate change is driving more frequent wildfires to burn more mountainous terrain throughout the western United States and worldwide. As a result, post-wildfire debris flows are becoming a more common threat in areas where they were once infrequent. As the threat of post-wildfire debris flow expands into new areas, evaluating the hazard becomes challenging because the degree to which wildfire increases debris-flow susceptibility varies from region to region. This chapter summarizes the knowledge to date for evaluating post-wildfire debris-flow susceptibility and hazard assessment. We summarize the characteristics of wildfire burn severity, topography, underlying soil and geology, and rainfall conditions that contribute to making a watershed most likely to produce post-wildfire debris flows. Methods for hazard assessment in the United States and other countries are summarized. We highlight knowledge gaps for how post-wildfire debris-flow susceptibility varies throughout the western United States and worldwide and identify research needs to improve hazard assessment methods in different geographies.

Book chapter↗
USGS1996

Hydrogeologic investigation and simulation of ground-water flow in the Upper Floridan Aquifer of north-central Florida and southwestern Georgia and delineation of contributing areas for selected city of Tallahassee, Florida, water-supply wells

A 4-year investigation of the Upper Floridan aquifer and ground-water flow system in Leon County, Florida, and surrounding counties of north-central Florida and southwestern Georgia began in 1990. The purpose of the investigation was to describe the ground-water flow system and to delineate the contributing areas to selected City of Tallahassee, Florida, water-supply wells. The investigation was prompted by the detection of low levels of tetrachloroethylene in ground-water samples collected from several of the city's water-supply wells. Hydrologic data and previous studies indicate that; ground-water flow within the Upper Floridan aquifer can be considered steady-state; the Upper Floridan aquifer is a single water-bearing unit; recharge is from precipitation; and that discharge occurs as spring flow, leakage to rivers, leakage to the Gulf of Mexico, and pumpage. Measured transmissivities of the aquifer ranged from 1,300 ft 2 /d (feet squared per day) to 1,300,000 ft2/d. Steady-state ground-water flow in the Upper Floridan aquifer was simulated using a three-dimensional ground- water flow model. Transmissivities ranging from less than 5,000 ft2/d to greater than 11,000,000 ft 2 /d were required to calibrate to observed conditions. Recharge rates used in the model ranged from 18.0 inches per year in areas where the aquifer was unconfined to less than 2 inches per year in broad areas where the aquifer was confined. Contributing areas to five Tallahassee water-supply wells were simulated by particle- tracking techniques. Particles were seeded in model cells containing pumping wells then tracked backwards in time toward recharge areas. The contributing area for each well was simulated twice, once assuming a porosity of 25 percent and once assuming a porosity of 5 percent. A porosity of 25 percent is considered a reasonable average value for the Upper Floridan aquifer; the 5 percent porosity simulated the movement of ground-water through only solution-enhanced bedding plains and fractures. The contributing areas were generally elliptical in shape, reflecting the influence of the sloping potentiometric surface. The contributing areas delineated for a 5 percent porosity were always much larger than those determined using a 25 percent porosity. The lowest average ground-water velocity computed within a contributing area, using a 25 percent porosity, was 1.0 ft/d (foot per day) and the highest velocity was 1.6 ft/d. The lowest average ground-water velocity, determined using a 5 percent porosity, was 2.4 ft/d and the highest was 7.4 ft/d. The contributing areas for each of the five wells was also determined analytically and compared to the model-derived areas. The upgradient width of the simulated contributing areas were larger than the upgradient width of the analytically determined contributing areas for four of the five wells. The model could more accurately delineate contributing areas because of the ability to simulate wells as partially penetrating and by incorporating complex, three-dimensional aquifer characteristics, which the analytical method could not.

Florida, Georgia↗
USGS2024

Effective site coefficients for the 2024 International Building Code (IBC)

The U.S. National Seismic Hazard Models (NSHMs), developed by the U.S. Geological Survey (USGS), have long been the scientific foundation of seismic design guidelines and have been used to compute design ground motions for construction of new buildings and retrofit of existing buildings in the United States and its territories. The 2018 NSHM is adopted by the 2024 International Building Code (IBC). Prior to the 2018 NSHM update, hazard calculations were required only at one reference site condition defined by V S30 =760 m/s (where V S30 is the time-averaged shear wave velocity from the surface to a depth of 30 m) and three periods (peak ground acceleration, PGA, and pseudo spectral accelerations at periods of 0.2 and 1 s, S s and S 1 ). Site coefficients, F PGA , F a , and F v , were then defined by the Building Seismic Safety Council (BSSC) Provisions Update Committee (PUC) in the site-specific procedures of National Earthquake Hazard Reduction Program (NEHRP) Recommended Seismic Provisions to calculate ground motions for other site classes with different V S30 values at the given periods. The design ground motions at other periods were then estimated using a generic spectral shape that was also defined by the BSSC PUC in NEHRP provisions. In recent years, the engineering community has realized there were deficiencies with the F a and F v site coefficients and the generic spectral shape. To avoid potentially dangerous underestimations of design ground motions for long period structures on soft site conditions in high seismicity regions, the BSSC PUC recommended the use of multi-period response spectra (MPRS) in 2017. As a result, the USGS produced multi-period and multi-V S30 response spectral values in the 2018 NSHM for calculations of design ground motions and the site coefficients F a and F v were eliminated from the 2020 NEHRP Provisions. As these site coefficients were widely used inside and outside of the United States, in this study we back-calculate the “effective” site coefficients F a,eff , and F v,eff by comparing MPRS for various site classes with the MPRS for the reference site condition, and discuss the changes that are observed in the 2024 IBC compared to its previous version in 2021. The effective site coefficients are presented for test site locations and their dependence on various factors including period, ground motion intensity, and regional models are discussed. Ratio maps between the new effective site coefficients and the old ones are then presented for soft site classes and for short and long periods. For soft site classes at short periods, the new effective site coefficients are lower than the old site coefficients for high seismicity regions and higher for low seismicity regions. As it was expected, for soft site classes at long periods and high seismicity regions, the new effective site coefficients are much larger than the old site coefficients without imposing the 50% increase as a penalty that was suggested in the 2021 IBC, whereas they could be much smaller if the 50% increase would have been imposed particularly around New Madrid and Charleston high seismicity regions. For low seismicity regions, the long period effective site coefficients can be smaller or larger by 20% compared to the 2021 IBC coefficients.

Conference Paper↗
USGS2024

Greater sage-grouse habitat of Nevada and northeastern California—Integrating space use, habitat selection, and survival indices to guide areas for habitat management

Executive Summary Greater sage-grouse populations ( Centrocercus urophasianus ; hereafter sage-grouse) are threatened by a suite of disturbances and anthropogenic factors that have contributed to a net loss of sagebrush-dominant shrub cover in recent decades. Declines in sage-grouse populations are largely linked to habitat loss across their range. A key component of conservation and land use planning efforts for sage-grouse involves the continued monitoring and modeling of habitat requirements and suitability across its range. The Bureau of Land Management (BLM) is addressing the management of sage-grouse habitats on BLM-authorized public lands throughout the western United States through a land use planning amendment and associated environmental impact statement (86 FR 66331). More than 25 percent of the range-wide distribution of sage-grouse is within Nevada and northeastern California, and information on sage-grouse distribution and habitat requirements is important to guide appropriate management decisions. Therefore, the BLM has identified the need for updated spatially explicit information on sage-grouse habitat in Nevada and northeastern California to guide the land use planning amendment and associated management decisions. To address this need, researchers with the U.S. Geological Survey, in close cooperation with multiple State and Federal resource agency partners, including BLM, Nevada Department of Wildlife (NDOW) and California Department of Fish and Wildlife (CDFW), sought to map sage-grouse distribution and produce example habitat designations in these states. Herein, we report results of our primary study objective, which was to map sage-grouse habitat and create example habitat management areas, based on more than a decade of location and survival data collected from marked sage-grouse across the study region coupled with lek count survey data managed by the NDOW and the CDFW. We expanded on previously developed methodology to incorporate information on habitat selection and survival during reproductive life stages and specific seasons with updated sage-grouse location and known fate datasets, while also including brood-rearing areas that are understood to be threatened and important for population persistence. We combined predictive habitat map surfaces for each life stage and season with updated information on current occupancy patterns to classify habitat based on its suitability and probability of occupancy. We carried out additional steps to delineate specific example habitat management areas, specifically (1) incorporated corridors connecting key nesting and brood-rearing habitat, (2) corrected outputs for pre-wildfire habitat conditions within areas burned in the last 16 years, and (3) masked out areas of anthropogenic development. Our methodological example of deriving habitat management areas was intended to help inform decisions by BLM and other land managers regarding conservation and management of sage-grouse. Associated data products in the form of habitat maps provide updated, detailed, and comprehensive information about the status of habitats and can be useful to partner agencies in their efforts to designate and rank habitats for this species of high conservation concern in Nevada and California, with full recognition that on-the-ground field data and local sources of information and expertise should be used in conjunction with inferences from these models.

California, Idaho, Nevada↗
USGS2024

Timing and geometry of the Chemehuevi Formation reveal a late Pleistocene sediment pulse into the Lower Colorado River

The Chemehuevi Formation is a distinctive 50−150-m-thick wedge-shaped Pleistocene sedimentary unit deposited by the Colorado River. It lines the perimeters of the river’s floodplains and bedrock canyons for more than 600 km between the mouth of the Grand Canyon and the delta region in the Gulf of California. The formation is composed of a basal tan to light-yellowish-brown and pale-orange mud-dominated facies overlain and interbedded by a light-yellow-brown sand-dominated facies. The unit is one of two extensively exposed aggradational packages in the Lower Colorado River corridor, in addition to a series of other smaller alluvial terrace deposits. The Chemehuevi Formation appears to represent the response of a fully integrated Colorado River system to a significant perturbation, in contrast to the Bullhead Alluvium, which is likely a unique result of Pliocene river integration. The aggradation of the Chemehuevi Formation in the Lower Colorado River corridor may be similarly due to a unique event in the Colorado River system, or it may instead be a well-preserved sedimentary sequence recording typical behavior of the Colorado River below the Grand Canyon in the late Pleistocene. As such, multiple causal mechanisms have been proposed, but no study to date has conclusively explained the Chemehuevi Formation. To help resolve its timing, duration, and origin, we applied post-infrared infrared stimulated luminescence, carbonate U-Th series, and zircon sensitive high-resolution ion microprobe U-Th series geochronology to determine the ages of key exposures of the unit over a wide spatial area. These new data demonstrate that the Chemehuevi Formation was deposited ca. 110−90 ka. The depositional ages collectively overlap, suggesting that deposition occurred rapidly relative to the resolution of the geochronometers. The new depositional timing coincides with a shift from glacial to interglacial conditions after the marine isotope stage 5-6 transition. This observation is consistent with a climate-induced sediment pulse as a causal mechanism, yet correlations with similar deposits in the Colorado River headwaters or in neighboring catchments appear elusive. Potentially, climate transitions between glacial and interglacial periods induced a sediment pulse from hillslopes of the Colorado River system that resulted in the Chemehuevi Formation. An alternative or additional explanation is that the Chemehuevi Formation represents release of lava dam−impounded sediment in the Grand Canyon. The surface geometry of the Chemehuevi Formation projects upstream to the approximate location of lava dams, and the largest possible lava dam impoundment (the Upper Prospect dam) is comparable in volume to the formation. The lava dam hypothesis appears to be a possible explanation for the Chemehuevi Formation. However, tying deposition to a specific lava dam or series of lava dams remains challenging due to discrepancies in timing and volume. The combined effects of a series of lava dams may have led to the Chemehuevi Formation, as the last Pleistocene lava dam eruption coincides with the onset of deposition. Alternatively, the formation may result from the combined effects of both regional climate transitions and the lava dams that created a transient reservoir to compound a climate transition−driven sediment pulse. The geochronologic data presented here do not allow us to distinguish between the lava dam or climate transition hypotheses but will need to be reconciled with any future proposed depositional model.

Arizona, California, Nevada↗
USGS1999

Concentrations and distribution of manmade organic compounds in the Lake Tahoe Basin, Nevada and California, 1997-99

The U.S. Geological Survey, in cooperation with the Tahoe Regional Planning Agency and the Lahontan Regional Water-Quality Control Board, sampled Lake Tahoe, major tributary streams to Lake Tahoe, and several other lakes in the Lake Tahoe Basin for manmade organic compounds during 1997-99. Gasoline components were found in all samples collected from Lake Tahoe during the summer boating season. Methyl tert -butyl ether (MTBE), benzene, toluene, ethylbenzene, and xylenes (BTEX) were the commonly detected compounds in these samples. Most samples from tributary streams and lakes with no motorized boating had no detectable concentrations of gasoline components. Motorized boating activity appears to be directly linked in space and time to the occurrence of these gasoline components. Other sources of gasoline components to Lake Tahoe, such as the atmosphere, surface runoff, and subsurface flow, are minor compared to the input by motorized boating. Water sampled from Lake Tahoe during mid-winter, when motorized boating activity is low, had no MTBE and only one sample had any detectable BTEX compounds. Soluble pesticides rarely were detected in water samples from the Lake Tahoe Basin. The only detectable concentrations of these compounds were in samples from Blackwood and Taylor Creeks collected during spring runoff. Concentrations found in these samples were low, in the 1 to 4 nanograms per liter range. Organochlorine compounds were detected in samples collected from semipermeable membrane devices (SPMD's) collected from Lake Tahoe, tributary streams, and Upper Angora Lake. In Lake Tahoe, SPMD samples collected offshore from urbanized areas contained the largest number and highest concentrations of organochlorine compounds. The most commonly detected organochlorine compounds were cis- and trans-chlordane, p , p' -DDE, and hexachlorobenzene. In tributary streams, SPMD samples collected during spring runoff generally had higher combined concentrations of organochlorine compounds than those collected during baseflow conditions. Upper Angora Lake had the fewest number of organochlorine compounds detected of all lake samples. Dioxins and furans were not detected in SPMD samples from two sites in Lake Tahoe or from two tributary streams. The number of polycyclic aromatic hydrocarbon (PAH) compounds and their combined concentrations generally were higher in samples from Lake Tahoe than those from tributary streams. Areas of high-motorized boating activity at Lake Tahoe had the largest number and highest concentrations of PAH's. PAH compounds were detected in samples from SPMD's in four of six tributary streams during spring runoff, all tributary streams during baseflow conditions, and at all lake sites. The most commonly detected PAH's in tributary streams during spring runoff were phenanthrene, fluoranthene, pyrene, and chrysene, and during baseflow conditions were phenanthrene, 1-methylphenanthrene, diethylnaphthalene, and pyrene. Upper Truckee River, which has an urban area in its drainage basin, had the largest number and highest combined concentration of PAH's of all stream samples. Bottom-sediment from Lake Tahoe had detectable concentrations of p-cresol, a phenol, in all but one sample. A sample collected near Chambers Lodge contained phenol at an estimated concentration of 4 micrograms per kilogram (µg/kg). Bottom-sediment samples from tributary streams had no detectable concentrations of organochlorine or PAH compounds. Several compounds were detected in bottom sediment from Upper Angora Lake at high concentrations. These compounds and their concentrations were p , p' -DDD (10 µg/kg), p , p' -DDE (7.4 µg/kg), 2,6-dimethylnaphthalene (estimated at 190 µg/kg), pentachlorophenol (3,000 µg/kg), and p-cresol (4,400 µg/kg).

California, Nevada↗
USGS1994

Hydrogeology of the Chickasaw National Recreation Area, Murray County, Oklahoma

The Travertine District (Park) of the Chickasaw National Recreation Area, operated and maintained by the National Park Service, is near the City of Sulphur in south-central Oklahoma. The Park was established in 1902 because of its unique hydrologic setting, which includes Rock Creek, Travertine Creek, numerous mineralized and freshwater springs, and a dense cover of riparian vegetation. Since the turn of the century several flowing artesian wells have been drilled within and adjacent to the Park. Discharge from many of these springs and the numbers of flowing wells have declined substantially during the past 86 years. To determine the cause of these declines, a better understanding of the hydrologic system must be obtained. The U.S. Geological Survey, in cooperation with the National Park Service, has appraised hydrologic information obtained for the Park from several studies conducted during 1902-87. The principal geologic units referred to in this report are the Arbuckle Group and the overlying Simpson Group. These rocks are of Upper Cambrian to Middle Ordovician age and are composed of dolomitic limestone, with some sandstones and shales in the Simpson Group. Surface geologic maps give a general understanding of the regional subsurface geology, but information about the subsurface geology within the Park is poor. The Simpson and Arbuckle aquifers are the principal aquifers in the study area. The two aquifers are not differentiated readily in some parts of the study area because of the similarity of the Simpson and Arbuckle rocks; thus, both water-bearing units are referred to frequently as the Arbuckle-Simpson aquifer. The aquifers are confined under the Park, but are unconfined east and south of the Park. Precipitation on the outcrop area of the Arbuckle aquifer northeast and east of the Park recharges the freshwater springs (Antelope and Buffalo Springs) near the east boundary of the Park. The source of water from mineralized springs located in the central part of the Park, and flowing wells within and north of the Park, is believed to be a mix of waters from rocks of the Arbuckle and Simpson Groups. The source of water from two highly mineralized springs, Bromide and Medicine, that ceased to flow in the early 1970’s is believed to be from the Simpson Group. Water-quality characteristics reflect the sources of ground water in the study area. The highly mineralized springs near the western end of the Park are a sodium chloride type with dissolved solids greater than 4,500 mg/L. The freshwater springs near the eastern end of the Park are a calcium bicarbonate type with total dissolved solids of less than 400 mg/L. Flow from the artesian wells has declined substantially during the past 86 years and the wells are estimated to currently discharge only about 10 percent of the total flow reported in 1939. The depletion is believed to be caused by a gradual lowering of the hydraulic head within the aquifer. The influence on the hydrologic system of local municipal and industrial pumping from the Arbuckle-Simpson aquifer is difficult to discern because the system is much more sensitive to precipitation than to pumpage. Ground-water levels and spring flows in this region respond rapidly to precipitation. The effects of withdrawals from the City of Sulphur and Oklahoma Gas and Electric Company power-plant water-well fields are not discernible at wells and springs. The hydrologic system may be influenced by pumping, particularly during extended dry periods of several years, but the impact of pumping on the system cannot be determined without further investigation.

Oklahoma↗
USGS1999

Episodic sediment-discharge events in Cascade Springs, southern Black Hills, South Dakota

Cascade Springs is a group of artesian springs in the southern Black Hills, South Dakota, with collective flow of about 19.6 cubic feet per second. Beginning on February 28, 1992, a large discharge of red suspended sediment was observed from two of the six known discharge points. Similar events during 1906-07 and 1969 were documented by local residents and newspaper accounts. Mineralogic and grain-size analyses were performed to identify probable subsurface sources of the sediment. Geochemical modeling was performed to evaluate the geochemical evolution of water discharged from Cascade Springs. Interpretations of results provide a perspective on the role of artesian springs in the regional geohydrologic framework. X-ray diffraction mineralogic analyses of the clay fraction of the suspended sediment were compared to analyses of clay-fraction samples taken from nine geologic units at and stratigraphically below the spring-discharge points. Ongoing development of a subsurface breccia pipe(s) in the upper Minnelusa Formation and/or Opeche Shale was identified as a likely source of the suspended sediment; thus, exposed breccia pipes in lower Hell Canyon were examined. Upper Minnelusa Formation breccia pipes in lower Hell Canyon occur in clusters similar to the discrete discharge points of Cascade Springs. Grain-size analyses showed that breccia masses lack clay fractions and have coarser distributions than the wall rocks, which indicates that the red, fine-grained fractions have been carried out as suspended sediment. These findings support the hypothesis that many breccia pipes were formed as throats of abandoned artesian springs. Geochemical modeling was used to test whether geochemical evolution of ground water is consistent with this hypothesis. The evolution of water at Cascade Springs could not be suitably simulated using only upgradient water from the Minnelusa aquifer. A suitable model involved dissolution of anhydrite accompanied by dedolomitization in the upper Minnelusa Formation, which is caused by upward leakage of relatively fresh water from the Madison aquifer. The anhydrite dissolution and dedolomitization account for the net removal of minerals that would lead to breccia pipe formation by gravitational collapse. Breccia pipes in the lower Minnelusa Formation are uncommon; however, networks of interconnected breccia layers and breccia dikes are common. These networks, along with vertical fractures and faults, are likely pathways for transmitting upward leakage from the Madison aquifer. It is concluded that suspended sediment discharged at Cascade Springs probably results from episodic collapse brecciation that is caused by subsurface dissolution of anhydrite beds and cements of the upper Minnelusa Formation, accompanied by replacement of dolomite by calcite. It is further concluded that many breccia pipes probably are the throats of artesian springs that have been abandoned and exposed by erosion. The locations of artesian spring-discharge points probably have been shifting outwards from the center of the Black Hills uplift, essentially keeping pace with regional erosion over geologic time. Thus, artesian springflow probably is a factor in controlling water levels in the Madison and Minnelusa aquifers, with hydraulic head declining over geologic time, in response to development of new discharge points. Development of breccia pipes as throats of artesian springs would greatly enhance vertical hydraulic conductivity in the immediate vicinity of spring-discharge points. Horizontal hydraulic conductivity in the Minnelusa Formation also may be enhanced by dissolution processes related to upward leakage from the Madison aquifer. Potential processes could include dissolution resulting from leakage in the vicinity of breccia pipes that are abandoned spring throats, active spring discharge, development of subsurface breccias with no visible surface expression or spring discharge, as well as general areal leakage from the Madison aquifer into the Minnelusa Formation.

South Dakota↗