USGS ScienceSearch

SEARCH · USGS Science

Results for “Hydrology and Earth Systems Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 35Linked to original sources

Overview of The SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest earthquake sequence

We present initial findings from the ongoing Community Stress Drop Validation Study to compare spectral stress‐drop estimates for earthquakes in the 2019 Ridgecrest, California, sequence. This study uses a unified dataset to independently estimate earthquake source parameters through various methods. Stress drop, which denotes the change in average shear stress along a fault during earthquake rupture, is a critical parameter in earthquake science, impacting ground motion, rupture simulation, and source physics. Spectral stress drop is commonly derived by fitting the amplitude‐spectrum shape, but estimates can vary substantially across studies for individual earthquakes. Sponsored jointly by the U.S. Geological Survey and the Statewide (previously, Southern) California Earthquake Center our community study aims to elucidate sources of variability and uncertainty in earthquake spectral stress‐drop estimates through quantitative comparison of submitted results from independent analyses. The dataset includes nearly 13,000 earthquakes ranging from M 1 to 7 during a two‐week period of the 2019 Ridgecrest sequence, recorded within a 1° radius. In this article, we report on 56 unique submissions received from 20 different groups, detailing spectral corner frequencies (or source durations), moment magnitudes, and estimated spectral stress drops. Methods employed encompass spectral ratio analysis, spectral decomposition and inversion, finite‐fault modeling, ground‐motion‐based approaches, and combined methods. Initial analysis reveals significant scatter across submitted spectral stress drops spanning over six orders of magnitude. However, we can identify between‐method trends and offsets within the data to mitigate this variability. Averaging submissions for a prioritized subset of 56 events shows reduced variability of spectral stress drop, indicating overall consistency in recovered spectral stress‐drop values.

California

Insights into Mountain Pass carbonatite formation from in-situ sulfur isotopes and geochemistry of sulfate and sulfide minerals

The Mountain Pass carbonatite stock hosts a world-class rare earth element deposit and may be classified as a carbonate-sulfate igneous rock, as it contains on average > 50 volume percent carbonate minerals and 20 to 30 volume percent sulfate minerals. The sulfates range in composition from barite to celestine and locally occur with sparse sulfide minerals. We investigate the origin of sulfur enrichment and the occurrence of sulfur-bearing minerals in the Mountain Pass carbonatite with in-situ sulfur isotope and mineral chemistry. Barite cores with δ 34 S of 1 to 3‰ do not coexist with sulfides, whereas celestine rims with δ 34 S of > 3‰ are associated with sulfides with δ 34 S < -10‰. We propose a model in which sulfur-bearing sediments were subducted during episodes of plate convergence in the Mojave Province that preceded Mountain Pass magmatism. Metasomatism of the overlying mantle by melts derived from the subducted sediments generated an unusually carbon- and sulfur-rich source to yield carbonatite magmas. Sulfur from primary carbonatite magmas and ~ 1 to 7% sulfur from subducted sediment melts yielded a slightly enriched δ 34 S composition (relative to depleted mantle δ 34 S of -1‰) for early crystallizing barite. Celestine rims on magmatic barite cores formed at low, hydrothermal temperatures (< 350 °C) based on S isotope thermometry for equilibrium celestine-galena and celestine-pyrite pairs. The sparse sulfides in the carbonatite stock are not in equilibrium with the primary barite cores and therefore do not permit S isotope thermometry estimates of magmatic temperatures. The S/Se ratios of sulfide minerals (> 3,400) typically exceed primitive mantle values (S/Se of 3,340), also consistent with their derivation from hydrothermal fluids. Trace occurrences of sulfide and sulfate minerals in alkaline silicate stocks related to the carbonatite stock have similar δ 34 S compositions and yield similarly low formation temperatures, suggesting regionally extensive and chemically similar sulfur-bearing hydrothermal fluids that imparted lithologically diverse rocks with a consistent sulfur isotope fingerprint.

California, Nevada

Pre-Acadian tectonics of the eastern Orange-Milford Belt, south-central Connecticut

This excursion presents a reinterpretation of mapping and new analytical data from the eastern Orange-Milford belt (OMB) in south-central Connecticut. The OMB is a fault-bound terrane of argillites and mafic rocks of anomalously low metamorphic grade—and of poorly constrained ages and tectonic affinity—wedged between kyanite/sillimanite-grade peri- Laurentian rocks to the west and anatectic peri-Gondwanan rocks to the east (Fig. 1A). Our data demonstrate that Ordovician(?) igneous and sedimentary rocks of the OMB were variably metamorphosed in the Ordovician and Silurian but escaped regionally pervasive, high-grade Devonian and later metamorphism. Previous interpretations (Fritts 1963a, 1965a, 1965b; Burger, 1967; Burger and others, 1968; Rodgers, 1985) described these rocks as a conformable sequence of low-grade, Ordovician to Devonian metasediments and metavolcanics. Our results reveal that the “metavolcanics” are not extrusive rocks but rather slivers of lower oceanic crust with complicated high- and low-grade metamorphic fabrics, intruded by a swarm of Silurian sheeted basalt dikes, and in fault contact with the surrounding metasediments. The purpose of this trip is to show evidence of early Paleozoic (Taconic) deformation and metamorphism preserved in rocks of the eastern OMB. These rocks remained shallow, cool, and sufficiently dry during the regionally dominant Acadian and Alleghanian orogenies to have avoided significant overprinting. As such, these rocks serve as windows into a geologic history otherwise unavailable between anatectic rocks of the peri-Gondwanan Bronson Hill, Avalon, and Gander terranes east of the Hartford basin and sillimanite-grade rocks of the peri-Laurentian Hartland and gneiss dome belts west of the OMB. We present major and trace element geochemistry including rare-earth element patterns for all mafic units in the eastern OMB as well as 40 Ar/ 39 Ar age spectra of amphibole, muscovite, and K-feldspar from rocks of the Maltby Lakes complex (of Deasy and others, 2017), Savin Schist, and Wepawaug Schist. Our evidence demonstrates that the units of the OMB have been assembled by faulting or intrusion, and that no stratigraphic relationships exist between the argillaceous schists and the metaigneous rocks.

Connecticut

Fluid inclusion constraints on the geometry of the magmatic plumbing system beneath Mauna Loa – Part 2: Xenoliths

Mauna Loa volcano erupts crystal-poor material at its summit and more crystal-rich material on its rift zones. Some of the more olivine-rich lava flows contain xenoliths with diverse mineralogy, including cumulate harzburgites with high-Mg# orthopyroxenes and high-Fo olivines (both > 84). Previous experimental work and thermodynamic modelling has proposed that high-Mg# orthopyroxenes only crystallize from Mauna Loa melts at high pressures (> 6 kbar, > 20 km), leading to suggestions that there is a region of sub-Moho magma storage at Mauna Loa in addition to the geophysically imaged magma reservoir at 2–5 km depth below the summit. We use melt and fluid inclusion barometry combined with thermodynamic models to further investigate this suggestion. Fluid inclusion data from harzburgites and dunitic xenoliths yield storage depths remarkably similar to those found in non-xenolithic crystals from lavas and tephras, with a clear peak at ~ 2–3 km (below the summit). Depths from melt inclusions in these xenoliths overlap with fluid inclusion pressures, ruling out the possibility of fluid inclusion re-equilibration during a period of stalling in a shallower reservoir. We examine five different thermodynamic models and find that the minimum pressure of olivine-orthopyroxene co-saturation varies by ~ 4 kbar (~ 12 km). These models also fail to predict that orthopyroxene is stable in ~ 15–80% of compositionally relevant experimental charges which grew orthopyroxene. Overall, this shows that phase stability modelling is an unreliable method of determining magma storage depth at Mauna Loa. We suggest that model discrepancies reflect a lack of experimental constraints on orthopyroxene stability at > 1200 ℃ and 0.01–5 kbar. Based on the presence of large oikocrystic orthopyroxenes completely enclosing rounded olivine chadacrysts, we suggest that these harzburgitic xenoliths formed through the reaction of intruding melts with olivine mush piles within the Mauna Loa edifice at ~ 3 km depth below the summit, with no need for a deeper storage reservoir. The predominance of pre-eruptive shallow storage means that there is more chance of detecting reservoir destabilization with geophysical monitoring techniques compared to a scenario where melts are supplied from sub-Moho reservoirs.

Hawaii

Analysis of factors affecting plume remediation in a sole-source aquifer system, southeastern Nassau County, New York

Several plumes of dissolved, chlorinated solvents, including trichloroethylene, have been identified in a sole-source aquifer near the former Northrop Grumman Bethpage Facility and Naval Weapons Industrial Reserve Plant sites in southeastern Nassau County, New York. Past investigations have documented that the groundwater contamination originated from this industrial area and now extends to the south, in the direction of groundwater flow. The intermixed plumes are commonly referred to as the “Navy Grumman groundwater plume.” Detailed groundwater-flow modeling was needed for the New York State Department of Environmental Conservation (NYSDEC) to evaluate design options necessary for the construction, operation, optimization, maintenance, and monitoring of a groundwater extraction and treatment cleanup plan selected in a December 2019 Amended Record of Decision by the NYSDEC to comprehensively address these plumes. Consequently, the NYSDEC began a cooperative study with the U.S. Geological Survey in 2020 to better understand the local hydrogeologic framework using two independent approaches to characterize aquifer heterogeneity and update an existing regional groundwater-flow model to provide transient boundary conditions for new inset groundwater-flow models of the plume area. We developed these detailed inset models for the two independent aquifer characterizations using history-matching techniques coupled with a novel approach to risk-based management optimization of the remedial design. We also used the updated regional model to assess this optimized groundwater extraction and treatment design for potential saltwater intrusion. The ensembles of parameters resulting from history matching provided a platform with which to evaluate capture by water-supply and remedial wells using particle-tracking techniques. Using the ensemble to select a risk stance, we performed multiobjective optimization to identify various configurations of remedial pumping that are consistent with external constraints and that favor potentially competing objectives. Multiple solutions provide tradeoffs that NYSDEC can consider. In general, pumping redistribution may help to prevent further contamination migration downgradient. These and other study results are intended to support decisions for the remedial design focused on the local area encompassing the full extent of the Navy Grumman groundwater plume.

New York

ShakeAlert® and schools: Incorporating earthquake early warning in school districts in Alaska, California, Oregon, and Washington

The U.S. Geological Survey-managed ShakeAlert® earthquake early warning system is the first public alerting system in the United States to provide rapid mass notification when an earthquake is detected. Although public alert delivery via mobile phones began in California in 2019 followed by Oregon and Washington in 2021, little is known about what might drive widespread implementation in at-risk institutional settings such as schools. For example, there has been limited research on how to best integrate earthquake early warning into existing emergency plans, alert systems, and drills to keep school children and personnel safe in an earthquake. To address this gap, in the spring of 2022, every school district superintendent in Alaska, California, Oregon, and Washington was sent a 15-min online survey. The survey assessed superintendent knowledge of ShakeAlert, preferences for alert messaging, and perceived opportunities and barriers to incorporating the system in schools. The results showed that superintendents had low awareness of ShakeAlert but held positive perceptions of the system's potential to enable life-saving protective actions. A major barrier to adoption included the perceived financial cost of implementing and maintaining the system. There were some statistically significant differences in state responses, and future research could investigate the specific needs of each state based on school district size and composition, hazard exposure, and earthquake experience. Together these findings can help inform targeted strategies to increase ShakeAlert adoption in schools and ultimately improve the safety of school children and staff during earthquakes.

Alaska, California, Oregon, Washington

Groundwater-level elevations in the bedrock aquifers of the Denver Basin aquifer system, Elbert County, Colorado, 2015–23

Water users in Elbert County, Colorado, rely on groundwater from bedrock aquifers in the Denver Basin aquifer system (upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers) for approximately half of their water uses. Withdrawals from the bedrocks aquifers have increased to meet the water use needs of expanding regional population growth and development. The U.S. Geological Survey, in cooperation with the Elbert County Board of County Commissioners, began a study in 2015 to monitor groundwater levels within Elbert County. The primary purpose of this report is to present a summary of groundwater levels measured during the study period (2015–23) and present results from statistical analyses of changes in groundwater-level elevations through time. Discrete groundwater levels were measured at 36 wells within Elbert County. Seven of those wells contained equipment to make and record continuous groundwater-level measurements at hourly intervals. All aquifers, except the lower Dawson aquifer, had only declining groundwater-level elevations in discrete measurements for wells with statistically significant trends. Of the eight statistically significant trends in the lower Dawson aquifer, two wells indicated increasing groundwater-level elevation from discrete measurements. The groundwater-level elevation trend medians in the upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers were −0.23, −0.66, −0.64, −0.39, and −0.63 feet per year, respectively, for discrete groundwater-level elevation measurements. Trends in continuous groundwater-level elevations were in agreement with statistically significant trends in discrete groundwater-level elevations for all wells. The groundwater-level elevation trend medians in this study, compared to the overall trends in a 2015−2018 study, both indicated declining groundwater-level elevations except in the upper Dawson aquifer, where the trend direction was opposite, a positive trend from 2015 to 2018 and a negative trend (declining groundwater elevations) from 2015 to 2023. The change in trends within the upper Dawson aquifer may be affected by differences in the study period and the trend analysis applied. Trends during the 2015–23 study period were compared to departures from the median 2015 groundwater-level elevation for each site in each aquifer. In general, the departures from the 2015 median supported trends observed at each site and correlated spatially with greater departures near the western border of Elbert County. Additionally, 30-year precipitation data showing wet and dry periods were overlaid with the departure from the 2015 median to assess groundwater-level patterns in wells in the five aquifers. Departures from the 2015 median groundwater-level elevations appeared greatest during the dry period between 2020 and 2023. Potentiometric-surface maps of the upper and lower Dawson aquifers created from static April 2023 groundwater elevations indicated groundwater-flow direction is generally from the south to the north. Results of this study could be used to guide additional groundwater monitoring in Elbert County and could aid in long-term planning of water resources.

Colorado

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska

Groundwater-storage change in the north Phoenix aquifer, Arizona, 2020–23

The city of Phoenix, Arizona, relies primarily on surface water for municipal water supply. The city also maintains wells to withdraw groundwater, particularly in times of drought and reduced surface-water supply, and to recharge groundwater when excess surface water is available. As of 2023, withdrawals from the aquifer in the northeastern part of the city are a small volume of water, less than 3,000 acre-feet in most years. Each year a similar volume of water is recharged through injection wells. The withdrawal wells are permitted to produce in total more than 20,000 acre-feet per year; increased pumping could lead to future groundwater-storage declines. To better understand groundwater-storage change in the north Phoenix aquifer, a repeat microgravity monitoring network was established in 2020. Measurements of changes in Earth’s gravity provide a direct, non-invasive measurement of subsurface mass change. Groundwater-storage changes were small during the 2020–23 study period, consistent with the relatively small volumes of pumping and recharge. Groundwater levels measured in monitoring wells were stable or increased slightly during this period, although the number of monitoring wells within the area of the gravity monitoring network is sparse. In total, about 15,000 acre-feet of water were pumped and 31,000 acre-feet recharged through injection in the north Phoenix aquifer during the 2020–22 period. Within the monitored area, groundwater storage increased by a small amount, about 1,000 acre-feet, in 2020, and decreased by a larger amount, about 6,000 acre-feet, each year in 2021 and 2022. Storage decreased at 89 of 102 stations from 2020 to 2023. Groundwater-storage decreases greater than the volume of net pumping indicate down-gradient subflow from the aquifer is greater than recharge plus incoming subflow, drying of the unsaturated zone resulting from decreased land-surface recharge, or both. At present (2023), the aquifer appears able to store and supply the relatively small amounts of water needed without excessive drawdown or harmful effects, such as land subsidence and surface inundation. If pumping or recharge increases in the future, the established repeat microgravity network is well suited to capture the spatial extent and magnitude of groundwater-storage changes in the aquifer.

Arizona

Monitoring marine eruptions

Introduction Submarine volcanoes produce much of the same seismicity and eruptive activity as subaerial volcanoes and can pose hazards to society. Although they can be monitored with similar techniques and methods as described in other chapters of this volume, their submerged location brings unique challenges. This chapter addresses these challenges and provides recommendations for monitoring volcanoes fully or partly in marine environments to meet the capabilities described in other chapters of this volume. The United States and its territories host dozens of submarine volcanoes with most (around 60) in the Commonwealth of the Northern Mariana Islands. Approximately 20 of the Northern Mariana Islands submarine volcanoes are known to be hydrothermally active, and 10 have confirmed eruptions since the 1950s (for example, Baker and others, 2008; Tepp and others, 2019a). Nine of those volcanoes were considered by the National Volcanic Threat Assessment (Ewert and others, 2018) to have a combination of eruptive type and summit depth that poses a higher risk of hazardous eruptions, although only one was listed as a moderate (level 3) threat. Other notable submarine volcanoes of interest to the United States that have historically erupted are Axial Seamount off the Washington State coast, Kamaʻehuakanaloa in Hawaiʻi, and Vailuluʻu seamount in American Samoa. All of these, however, have a low risk of hazards because of their depth (greater than 600 meters below sea level) and eruptive type and so are not included in the National Volcanic Threat Assessment. In addition to submarine volcanoes, the submerged flanks of island volcanoes can also be a source of hazardous submarine eruptions—for example, the 1877 eruption of Mauna Loa, Hawai‘i, in Kealakekua Bay (Wanless and others, 2006). The most notable submarine eruption in recent times was the 2022 eruption of Hunga Tonga–Hunga Haʻapai in Tonga, which was one of the largest eruptions on Earth in the past 100 years. It created a massive volcanic plume, unprecedented shock waves, and far-reaching tsunami (Lynett and others, 2022). Other recent submarine eruptions in the Pacific Ocean Basin have produced subaerial plumes that reached aircraft heights (Carey and others, 2014) and large pumice rafts that can affect marine traffic and harbors (for example, Jutzeler and others, 2014; Kornei, 2019). These examples illustrate the potential hazards of major submarine eruptions. Yet, submarine volcanoes are largely unmonitored, and many eruptions occur that are unnoticed or only identified hours or days afterward. Within U.S. territory, submarine volcanoes in the Northern Mariana Islands have been known to produce eruptive activity that can affect society. Reports from fishermen and other marine vessels in the Northern Mariana Islands have noted underwater explosions, sea-surface discoloration, and bubbling water, all of which are known to be signs of submarine volcanic activity. South Sarigan seamount, located about 160 kilometers (km) north of Saipan, erupted in 2010 from greater than 150 meters below the sea surface, resulting in a gas and ash plume that reached more than 11.9 km into the atmosphere (for example, Searcy, 2013; Embley and others, 2014), high enough to affect international air traffic. Precursory and co-eruptive seismicity was detected on the regional Northern Mariana Islands seismic network (Searcy, 2013) and on global monitoring instruments (Green and others, 2013). Monitoring of submarine volcanoes is best accomplished with marine-based instrumentation, which is also useful for monitoring small island volcanoes that may not have the land area necessary for comprehensive subaerial monitoring. The primary marine-based instrumentation used for submarine volcanoes includes ocean-bottom pressure sensors to assess sea-floor deformation, ocean-bottom seismometers (OBSs) to detect seismicity, and both moored and ocean-bottom hydrophones to detect submarine explosions. Other sensors offer important monitoring data, such as turbidity, temperature, and chemistry of hydrothermal emissions. Marine-based instruments are typically deployed in campaign-style networks with no real-time telemetry owing to cost considerations and technical limitations. However, when necessary, marine instruments can be operated in real time using cables to transmit data to land-based facilities; other technologies for this purpose are in use or in development, such as acoustic transmission from the instrument to a moored buoy (Matsumoto and others, 2016) and a winch-based system with a satellite antenna that is part of the instrument mooring (Matsumoto and others, 2019). Emerging technologies for marine-based monitoring may be considered as part of a future monitoring plan. These technologies include ocean gliders and floats with on-board hydrophones that have been used to record earthquakes and submarine eruptions (for example, Matsumoto and others, 2013; Sukhovich and others, 2015) and fiber-optic cables that have been used as strainmeters to detect earthquakes (for example, Marra and others, 2018; Lindsey and others, 2019). Land-based instruments and satellites can also provide some capability for monitoring submarine volcanoes, but they provide more limited observations than marine-based instrumentation.

Scientific Investigations Report

Estimating groundwater level records using MOVE.1 and computing monthly percentiles from estimated groundwater records in Massachusetts

The U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, performed record extensions on groundwater levels at select wells using the Maintenance of Variance Extension type 1 (MOVE.1) method. The groundwater levels estimated from these record extensions were used to compute monthly percentiles to improve future determinations of a groundwater index. In Massachusetts, 27 of 29 short-record study wells with continuous groundwater levels between 0.8 and 8.1 years were suitable for record extensions; 37 long-record index wells were used to extend the groundwater level records at the study wells. The index well selected to pair with a study well was chosen based on Pearson correlation coefficient values; cross-correlation between the two wells; geologic and topographic similarity; and smallest distance spanning the wells. Each study well and its corresponding index well have 1 or more years of concurrent, overlapping data; a Pearson correlation coefficient that exceeded a threshold value of 0.8; and a similar aquifer type and hydrologic characteristics. Of the 29 study wells, 2 showed poor correlations with all index wells and were not considered for record extensions. Performance metrics used to assess the accuracy of the MOVE.1 models indicated that most models provided reasonable estimates of groundwater levels. Root mean square error values ranged from 0.097 to 2.292 feet, with a median of 0.536 foot. Nash-Sutcliffe efficiency coefficient values ranged from 0.623 to 0.996, with a median value of 0.759. Generally, study wells in close geographical proximity to their index well resulted in stronger model performance. The average length of groundwater level records was extended by 14.1 years to a new average of 18.1 years. The estimated groundwater level records from the MOVE.1 models resulted in an increase in the range of highest and lowest groundwater levels at 23 of 27 wells. The increase in range of groundwater levels was between 0.08 to 7.95 feet. Monthly percentiles for State drought indices were computed from the estimated MOVE.1 records and observed records through December 31, 2021. Percentiles computed from estimated records show an average groundwater level about 1.0 foot lower than observed data at the 2d percentile and 0.1 foot lower at the 30th percentile.

Massachusetts

Hydraulic properties of the Madison aquifer system in the western Rapid City area, South Dakota

Available information on hydrogeology, data from borehole geophysical logs, and aquifer tests were used to determine the hydraulic properties of the Madison aquifer. From aquifer-test analysis, transmissivity and storage coefficient were determined for the Minnelusa and Madison aquifers, and vertical hydraulic conductivity (K v ') along with specific storage (Ss') for the Minnelusa confining bed. Borehole geophysical well logs were used to determine the thickness and location of the Minnelusa aquifer, the lower Minnelusa confining bed, and the Madison aquifer within the Madison Limestone. Porosity values determined from quantitative analysis of borehole geophysical well logs were used in analyzing the aquifer-test data. The average porosity at the two aquifer-test sites is about 10 percent in the Minnelusa aquifer, 5 percent in the lower Minnelusa confining bed, and 35 percent in the Madison aquifer. The first aquifer test, which was conducted at Rapid City production well #6, produced measured drawdown in the Minnelusa and Madison aquifers. Neuman and Witherspoon's method of determining the hydraulic properties of leaky two-aquifer systems was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. Analysis of the aquifer test for the Minnelusa aquifer yielded a transmissivity value of 12,000 feet squared per day and a storage coefficient of 3 x 10 -3 . The specific storage of the Minnelusa confining bed was 2 x 10 -7 per foot, and its vertical hydraulic conductivity was 0.3 foot per day. The transmissivity of the Madison aquifer at this site was 17,000 feet squared per day, and the storage coefficient was 2 x 10 -3 . The second aquifer test, which was conducted at Rapid City production well #5 (RC-5) produced measured drawdown only in the Madison aquifer. Hantush and Jacob's method of determining the hydraulic properties of leaky confined aquifers with no storage in the confining bed was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. The analysis of data from the RC-5 aquifer test showed that transmissivity was not equal in all directions. Hantush's method was used to determine the direction of radial anisotropy and magnitude of the major and minor axes of transmissivity. The major axis of transmissivity is at an angle of 42° east of north, and the transmissivity along this axis is about 56,000 feet squared per day. The minor axis of transmissivity is at an angle of 48° west of north, and the transmissivity along this axis is about 1,300 feet squared per day. The major axis of transmissivity intersects Cleghorn Springs, a large resurgent spring on the west edge of Rapid City. The shape of the potentiometric contours of the Madison aquifer near RC-5 agree with the orientation of the transmissivity ellipse. The average value of the storage coefficient from the isotropic analysis of the aquifer-test data was 3.5 x 10 -4 , and the average vertical hydraulic conductivity of the lower Minnelusa confining bed was 9.6 x 10 -3 foot per day.

South Dakota

Investigation of land cover within wetland complexes at Dixie Meadows, Churchill County, Nevada, from October 2015 to January 2022

The U.S. Geological Survey investigated land cover at subannual time steps within six wetland areas in Dixie Valley, Churchill County, Nevada, from October 2015 to January 2022. As requested by the U.S. Fish and Wildlife Service, we used aerial photography and satellite remote sensing data to map surface water and other land cover types within the wetland complexes. We identified five land cover classes using the green normalized difference vegetation index (gNDVI) and its inverse relationship to the normalized difference water index (NDWI) within three U.S. Department of Agriculture National Agriculture Imagery Program aerial images (acquired in 2015, 2017, and 2019) and 110 European Space Agency Sentinel-2 satellite images (acquired 2015–2022). The relative wetness of soil conditions within each land cover class is estimated by comparison to previously published observations of relative conductivity measured by 79 field-based sensors within the wetlands from 2019 to 2021. We mapped the areal coverage of the five land cover classes for approximately 385 acres (1,559,000 square meters [m²]) comprising six individual wetland complexes as well as a larger 1,298- acre (5,254,000-m 2 ) area of interest inclusive of the wetland complexes and adjacent landscape. Land cover of open water (Class 5) primarily within ponds at one of the wetland complexes comprised 8,333 m 2 , on average, of the wetland complexes. Land cover of mixed shallow surface water, saturated soil, and vegetation (Class 4) comprised 111,723 m 2 on average of the wetland complexes. Land cover of dense green vegetation canopy cover (Class 3) that often (46 percent of observations) had underlying surface water or saturated soil conditions comprised 592,522 m 2 on average of the wetland complexes. The remaining areas of the wetland complexes not mapped as these three land cover types (Classes 2 and 1) had sparse vegetation or bare soil cover and commonly (greater than or equal to 67 percent of observations) had dry soil conditions. The investigation of land cover detailed in this report could inform future efforts to map land cover more precisely via higher resolution remote sensing or ground-based surveying or could be incorporated with other environmental monitoring data to characterize habitat and hydrology of the wetland complexes at Dixie Meadows.

Nevada

Hydroacoustic observations reveal drivers of mixing and salinization of a karst subterranean estuary during intense precipitation

Karst subterranean estuaries within globally ubiquitous carbonate aquifers are coastal groundwater ecosystems that provide an essential water resource for human populations. To understand the drivers of salinization within a coastal aquifer in the Yucatan Peninsula (Mexico), we employed hydroacoustics in flooded caves to observe how oceanic and atmospheric events facilitate mixing between the meteoric lens (fresh-brackish groundwater) and the saline groundwater on tidal and episodic timescales. Precipitation during Tropical Storm Carlotta increased the flow and salinity of the meteoric lens without evidence for vertical mixing across the halocline. We postulate that vertical migration of haloclines in the conduit relative to those within the rock matrix during precipitation creates lateral density gradients that drive mixing, and ultimately creates a brackish layer within the meteoric lens. These results provide a mechanistic explanation for vertical and lateral exchange in a coastal carbonate aquifer, which has implications for groundwater response to future climatic change.

Ox Bel Ha cave system, Yucatan peninsula

Will there be water? Climate change, housing needs, and future water demand in California

Climate change in California is expected to alter future water availability, impacting water supplies needed to support future housing growth and agriculture demand. In groundwater-dependent regions like California's Central Coast, new land-use related water demand and decreasing recharge is already stressing depleted groundwater basins. We developed a spatially explicit state-and-transition simulation model that integrates climate, land-use change, water demand, and groundwater gain-loss to examine the impact of future climate and land use change on groundwater balance and water demand in five counties along the Central Coast from 2010 to 2060. The model incorporated downscaled groundwater recharge projections based on a Warm/Wet and a Hot/Dry climate future from a spatially explicit hydrological process-based model. Two urbanization projections from a parcel-based, regional urban growth model representing 1) recent historical and 2) state-mandated housing growth projections were used as alternative spatial targets for future urban growth. Agricultural projections were based on recent historical trends from remote sensing data. Annual projected changes in groundwater balance were calculated as the difference between land-use related water demand, based on historical estimates, and climate-driven recharge plus agriculture return flows. Results indicate that future changes in climate-driven groundwater recharge, coupled with cumulative increases in agricultural water demand, result in overall declines in future groundwater balance, with a Hot/Dry future resulting in cumulative groundwater decline in all but Santa Cruz County. Cumulative declines by 2060 are especially prominent in San Luis Obispo (−2.9 to −5.1 Bm 3 ) and Monterey counties (−6.5 to −8.7 Bm 3 ), despite limited changes in agricultural water demand over the model period. These two counties show declining groundwater reserves in a Warm/Wet future as well, while San Benito and Santa Barbara County barely reach equilibrium. These results suggest future groundwater supplies may not be able to keep pace with regional demand and declining climate-driven recharge, resulting in a potential reduction in water security in the region. However, our county-scale projections showed new housing and associated water demand does not conflict with California's groundwater sustainability goals. Rather, future climate coupled with increasing agricultural groundwater demand may reduce water security in some counties, potentially limiting available groundwater supplies for new housing.

California

Estimating the probability of elevated nitrate (NO2+NO3-N) concentrations in ground water in the Columbia Basin Ground Water Management Area, Washington

Logistic regression was used to relate anthropogenic (man-made) and natural factors to the occurrence of elevated concentrations of nitrite plus nitrate as nitrogen in ground water in the Columbia Basin Ground Water Management Area, eastern Washington. Variables that were analyzed included well depth, depth of well casing, ground-water recharge rates, presence of canals, fertilizer application amounts, soils, surficial geology, and land-use types. The variables that best explain the occurrence of nitrate concentrations above 3 milligrams per liter in wells were the amount of fertilizer applied annually within a 2-kilometer radius of a well and the depth of the well casing; the variables that best explain the occurrence of nitrate above 10 milligrams per liter included the amount of fertilizer applied annually within a 3-kilometer radius of a well, the depth of the well casing, and the mean soil hydrologic group, which is a measure of soil infiltration rate. Based on the relations between these variables and elevated nitrate concentrations, models were developed using logistic regression that predict the probability that ground water will exceed a nitrate concentration of either 3 milligrams per liter or 10 milligrams per liter. Maps were produced that illustrate the predicted probability that ground-water nitrate concentrations will exceed 3 milligrams per liter or 10 milligrams per liter for wells cased to 78 feet below land surface (median casing depth) and the predicted depth to which wells would need to be cased in order to have an 80-percent probability of drawing water with a nitrate concentration below either 3 milligrams per liter or 10 milligrams per liter. Maps showing the predicted probability for the occurrence of elevated nitrate concentrations indicate that the irrigated agricultural regions are most at risk. The predicted depths to which wells need to be cased in order to have an 80-percent chance of obtaining low nitrate ground water exceed 600 feet in the irrigated agricultural regions, whereas wells in dryland agricultural areas generally need a casing in excess of 400 feet. The predicted depth to which wells need to be cased to have at least an 80-percent chance to draw water with a nitrate concentration less than 10 milligrams per liter generally did not exceed 800 feet, with a 200-foot casing depth typical of the majority of the area.

Washington

Structural setting and geothermal potential of northeastern Reese River Valley, north-central Nevada: Highly prospective detailed study site for the INGENIOUS project

The northeastern part of the Reese River basin situated ~15 km southeast of Battle Mountain, Nevada, scored highly in the Nevada geothermal play fairway analysis (PFA) for hosting potential hidden geothermal systems. This site (also referred to as Argenta Rise) was therefore chosen for detailed study in the INGENIOUS project (INnovative Geothermal Exploration through Novel Investigations Of Undiscovered Systems). The high PFA scores resulted primarily from favorable structural settings (e.g., fault intersections and pull aparts) with relatively high slip rates on Quaternary faults. The INGENIOUS project is utilizing additional parameters and more rigorous analytical techniques to further advance exploration at this site. This includes integration of geological (e.g., Quaternary fault mapping) and new geophysical datasets (e.g., gravity, magnetics, MT data, and five reprocessed seismic reflection profiles) to build a structural model and to identify specific favorable sites for potential geothermal upwellings. Two-meter temperature surveys were also conducted in the area (139 measurements). This part of north-central Nevada is characterized by systems of intersecting northerly and ENE-striking faults within the broader Humboldt structural zone, a poorly understood belt of ENE-striking faults and relatively high heat flow extending across northern Nevada. Kinematic analysis of exposed fault surfaces shows that ENE-striking faults have accommodated sinistral-normal slip, and normal slip characterizes N- to NNE-striking faults. Northeastern Reese River Valley lies within a broad left step between major ENE-striking fault zones on the northern flanks of the Argenta Rim and Shoshone Range and thus corresponds to a broad pull-apart in the ENE-striking sinistral-normal fault system. Notably, the nearby Beowawe geothermal system in Whirlwind Valley (with abundant sinter, hot springs, and a geothermal power plant) occupies a fault intersection in a relatively small left step in a major ENE-striking sinistral-normal fault and may serve as an analogue for a potential hidden system in northeastern Reese River Valley. Existing geological maps, high-resolution lidar, and seismic reflection data demonstrate that northeastern Reese River Valley is structurally complex with multiple intersections between the ENE- and N- to NNE-striking fault systems. Some of these fault intersections correspond to low resistivity anomalies, magnetic lows, and/or very subtle 2-m temperature anomalies, which may indicate hidden geothermal upwellings. Three-dimensional modeling and temperature-gradient drilling are planned to further evaluate these sites for geothermal activity.

Nevada

Metal fingerprints of Eocene rhyolite magmas coincident with Carlin-type gold deposition in Nevada USA

Eocene magmatic systems contemporaneous with world-class Carlin-type Au deposits in Nevada (USA) have been proposed by some researchers as a key ingredient for Au mineralization, though evidence conclusively demonstrating their genetic relationship remains tenuous. This study provides the first direct evidence of the pre-eruptive metal budget of volatile- and metal-charged silicic magmas coincident in time (~41 to 34 Ma) and space (within 5 km) with Carlin-type Au deposits. We characterize the pre-eruptive metal fingerprints of these diverse magmatic systems to assess their potential as sources of metals for Carlin-type Au mineralization. Metal abundances from quartz-hosted melt inclusions (Au, Te, Ag, Sb, Tl, Mo, W, Sn, As, Pb, Co, Cu, Ni, and Zn) characterized in situ by SHRIMP-RG and LA-ICP-MS represent our best (and only) estimates for the pre-eruptive metal budget in these systems. Median metal concentrations are generally within one order of magnitude of average upper crust and average continental rhyolite values. But there are two notable exceptions, with median Au contents extending >1 order of magnitude higher than average upper crust and median Cu contents ranging >1 order of magnitude lower than upper crust. Despite this, melts contain lower Au/Cu (<0.1), Au/Ag (<5), and Au/Tl (<0.3) than most ore-grade Carlin-type rock samples and quartz-hosted fluid inclusions, regardless of their age and timing relative to nearby Carlin-type Au mineralization. The metal fingerprints of these magmatic systems, de-fined both by traditional and multivariate compositional data analysis techniques, are distinct from one another. Yet none are particularly specialized, e.g., high Au/Cu, in terms of being ideal ingredients as postulated by magmatic models for Carlin-type Au mineralization. Magmatic Au contents do not appear to be correlated with rhyolite “flavors” in the way that Cu, Sn, and Nb contents are. Fluid/melt partitioning modeling and magma volume estimates support the idea that a diverse array of non-specialized silicic magmas could feasibly contribute some or potentially all of the Au, Ag, and Cu in Carlin-type systems. The compositional diversity among contemporaneous magmatic systems could possibly contribute to some of the diversity observed across Carlin-type Au districts in Nevada.

Nevada