USGS Science⌕ Search

SEARCH · USGS Science

Results for “Structure”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS1973

Ironside Mountain, Oregon: A late Tertiary volcanic and structural enigma

Note: This paper is dedicated to Aaron and Elizabeth Waters on the occasion of Dr. Waters' retirement. Ironside Mountain is a 6- by 10-km block of folded rhyolite, andesite, and basalt flows of the Strawberry Volcanics bounded by a horse-shoe-shaped reverse fault and surrounded by Mesozoic rocks. The toe of the horseshoe points northeast; the fault dips outward at angles of 45° to 90°, has a minimum displacement of 600 m at the toe, and dies out or is buried at the open southwest end. Flows are folded to vertical in a crosswise anticline at the northeast end, and in a synclinal structure along the southwest edge. Local unconformities and thickening of flows in a small basin show that some deformation accompanied volcanism, which has been dated as late Miocene and early Pliocene. No centers of eruption have been identified within the Horseshoe fault. The Ironside Mountain block seems to be a unique expression of cross folding in the region. The northwest-striking Mine Ridge–Ironside anticline follows the main regional trend, and is faulted where two large down-warps strike into it from the northeast. The Ironside Mountain structure is interpreted as being a transverse compressional feature in which opposing reverse faults took the place of anticlinal folding, directly on strike with a syncline to the northeast. A horst of pre-Tertiary rocks, which has been raised at least 600 m, crosses the axes of the abutting structures; the nose of the Horseshoe fault bounds one side of it, and a range-border fault bounds the other. Cross faults, of which we found only one, are believed to have facilitated arching and longitudinal shortening within the horst.

Oregon↗
USGS1993

The Mount Evans batholith in the Colorado Front Range: Revision of its age and reinterpretation of its structure

The Mount Evans batholith, in the central Front Range of Colorado, is composed of a main phase of massive to conspicuously foliated monzogranite and granodiorite and undeformed aplite and pegmatite. The Mount Evans batholith was previously considered to be part of the 1.7 Ga Routt Plutonic Suite. New U-Pb zircon ages on four samples (granodiorite, monzogranite, and granite), however, indicate that the batholith was emplaced at 1,442 ± 2 Ma and belongs to the Berthoud Plutonic Suite. Most of the batholith has igneous textures and structures, except in the vicinity of the Idaho Springs-Ralston shear zone where those features are tectonically recrystallized and foliated. Foliation elsewhere in the batholith is a flow structure. Zircons in two granodiorite samples, collected near the shear zone (just south of the Colorado Mineral Belt), are reversely discordant by about 0.8%-2.1%, with a considerable spread in 207 Pb/ 206 Pb ages. Many of the zircons from these samples contain apatite, K-feldspar, and quartz inclusions that appear to replace zircon along cracks and imperfections from rim to core. We suggest that these inclusions formed during a Laramide ore-forming event and incorporated Early and Middle Proterozoic radiogenic lead scavenged from the country rock. The excess radiogenic lead caused the scatter and reverse discordance in the data. The Mount Evans batholith is anomalous in composition and structure compared to most other 1.4 Ga plutons of the southwestern United States. The differences probably reflect different sources of partial melting; the specific tectonic setting where rocks of such disparate origin are temporally and spatially juxtaposed is not understood.

Colorado↗
USGS1993

Upper-crustal structure beneath the Columbia River Basalt Group, Washington: Gravity interpretation controlled by borehole and seismic studies

A three-dimensional gravity model based on deep-borehole stratigraphy, densities from borehole gravimetry, and crustal structure from deep seismic and electrical surveys puts limits on sub-basalt crustal structure in the northwest quadrant of the Columbia Plateau, Washington. The gravity model indicates that the Miocene Columbia River Basalt Group (CRBG) overlies a broad basin filled with sedimentary rocks that reach thicknesses in excess of 5 km; thickest sub-basalt sedimentary rocks are beneath the late Cenozoic Yakima basin. Analysis of residual gravity shows that the Eocene Chiwaukum graben does not continue beneath the CRBG and that sub-basalt sedimentary rocks are not thrust into the cores of the basalt anticlines in the Yakima fold belt. A gravity high that trends north-south in the center of the CRBG is probably caused by a broad basement ridge marked by thinner sedimentary rocks beneath the Columbia River basalts; the western edge of the north-south basement high is traced at the surface by the Hog Ranch-Naneum Ridge. A major crustal feature, the Olympic- Wallowa lineament, is expressed in the gravity field; the lineament crosses the north-south basement high but does not offset it, suggesting that any strike- slip motion on the lineament preceded development of the north-south basement high. An alternative interpretation of the north-south gravity high, based on a previous seismic study, relates it to a high-density structure in the crystalline basement, perhaps associated with a failed continental rift.

Idaho, Oregon, Washington↗
USGS1998

Structural and kinematic evolution of the Yukon-Tanana upland tectonites, east-central Alaska: A record of late Paleozoic to Mesozoic crustal assembly

The Yukon-Tanana terrane, the largest tectonostratigraphic terrane in the northern North American Cordillera, is polygenetic and not a single terrane. Lineated and foliated (L-S) tectonites, which characterize the Yukon-Tanana terrane, record multiple deformations and formed at different times. We document the polyphase history recorded by L-S tectonites within the Yukon-Tanana upland, east-central Alaska. These upland tectonites compose a heterogeneous assemblage of deformed igneous and metamorphic rocks that form the Alaskan part of what has been called the Yukon-Tanana composite terrane. We build on previous kinematic data and establish the three-dimensional architecture of the upland tectonites through kinematic and structural analysis of more than 250 oriented samples, including quartz c-axis fabric analysis of 39 samples. Through this study we distinguish allochthonous tectonites from parautochthonous tectonites within the Yukon-Tanana upland. The upland tectonites define a regionally coherent stacking order: from bottom to top, they are lower plate North American parautochthonous attenuated continental margin; continentally derived marginal-basin strata; and upper plate ocean-basin and island-arc rocks, including some continental basement rocks. We delineate three major deformation events in time, space, and structural level across the upland from the United States-Canada border to Fairbanks, Alaska: (1) pre-Early Jurassic (>212 Ma) northeast-directed, apparent margin-normal contraction that affected oceanic rocks; (2) late Early to early Middle Jurassic (>188-185 Ma) northwest-directed, apparent margin-parallel contraction and imbrication that resulted in juxtaposition of the allochthonous tectonites with parautochthonous continental rocks; and (3) Early Cretaceous (135-110 Ma) southeast-directed crustal extension that resulted in exposure of the structurally deepest, parautochthonous continental rocks. The oldest event represents deformation within a west-dipping (present coordinates) Permian-Triassic subduction zone. The second event records Early to Middle Jurassic collision of the arc and subduction complex with North American crust, and the third event reflects mid-Cretaceous southeast-directed crustal extension. Events one and two can be recognized and correlated through southern Yukon, even though this region was affected by mid-Cretaceous dextral shear along steep northwest-striking faults. Our data support a model of crustal assembly originally proposed by D. Tempelman-Kluit in which previously deformed allochthonous rocks were thrust over parautochthonous rocks of the attenuated North American margin in Middle Jurassic time. Approximately 50 m.y. after tectonic accretion, east-central Alaska was dissected by crustal extension, exposing overthrust parautochthonous strata.

Alaska↗
USGS1999

Window into the Caledonian orogen: Structure of the crust beneath the East Shetland platform, United Kingdom

Reprocessing and interpretation of commercial and deep seismic reflection data across the East Shetland platform and its North Sea margin provide a new view of crustal subbasement structure beneath a poorly known region of the British Caledonian orogen. The East Shetland platform, east of the Great Glen strike-slip fault system, is one of the few areas of the offshore British Caledonides that remained relatively insulated from the Mesozoic and later rifting that involved much of the area around the British Isles, thus providing an “acoustic window” into the deep structure of the orogen. Interpretation of the reflection data suggests that the crust beneath the platform retains a significant amount of its original Caledonian and older architecture. The upper to middle crust is typically poorly reflective except for individual prominent dipping reflectors with complex orientations that decrease in dip with depth and merge with a lower crustal layer of high reflectivity. The three-dimensional structural orientation of the reflectors beneath the East Shetland platform is at variance with Caledonian reflector trends observed elsewhere in the Caledonian orogen (e.g., north of the Scottish mainland), emphasizing the unique tectonic character of this part of the orogen. Upper to middle crustal reflectors are interpreted as Caledonian or older thrust surfaces that were possibly reactivated by Devonian extension associated with post-Caledonian orogenic collapse.

Geological Society of America Bulletin↗
USGS2002

Structural and tectonic setting of the Charleston, South Carolina, region: Evidence from the Tertiary stratigraphic record

Eleven upper Eocene through Pliocene stratigraphic units occur in the subsurface of the region surrounding Charleston, South Carolina. These units contain a wealth of information concerning the long-term tectonic and structural setting of that area. These stratigraphic units have a mosaic pattern of distribution, rather than a simple layered pattern, because deposition, erosion, and tectonic warping have interacted in a complex manner through time. By generating separate structure-contour maps for the base of each stratigraphic unit, an estimate of the original basal surface of each unit can be reconstructed over wide areas. Changes in sea level over geologic time generate patterns of deposition and erosion that are geographically unique for the time of each transgression. Such patterns fail to persist when compared sequentially over time. In some areas, however, there has been persistent, repetitive net downward of upward movement over the past 34 m.y. These repetitive patterns of persistent motion are most readily attributable to tectonism. The spatial pattern of these high and low areas is complex, but it appears to correlate well with known tectonic features of the region. This correlation suggests that the tectonic setting of the Charleston region is controlled by scissors-like compression on a crustal block located between the north-trending Adams Run fault and the northwest-trending Charleston fault. Tectonism is localized in the Charleston region because it lies within a discrete hinge zone that accommodates structural movement between the Cape Fear arch and the Southeast Georgia embayment.

South Carolina↗
USGS2001

Crustal structure and tectonics from the Los Angeles basin to the Mojave Desert, southern California

A seismic refraction and low-fold reflection survey, known as the Los Angeles Region Seismic Experiment (LARSE), was conducted along a transect (line 1) extending from Seal Beach, California, to the Mojave Desert, crossing the Los Angeles and San Gabriel Valley basins and San Gabriel Mountains. The chief result of this survey is an interpreted cross section that addresses a number of questions regarding the crustal structure and tectonics of southern California that have been debated for decades and have important implications for earthquake hazard assessment. The results (or constraints) are as follows. (1) The maximum depth of the Los Angeles basin along line 1 is 8–9 km. (2) The deep structure of the Sierra Madre fault zone in the northern San Gabriel Valley is as follows. The Duarte branch of the Sierra Madre fault zone forms a buried, 2.5-km-high, moderately north dipping buttress between the sedimentary and volcanic rocks of the San Gabriel Valley and the igneous and metamorphic rocks of the San Gabriel Mountains. (For deeper structure, see following.) (3) There are active crustal décollements in southern California. At middle-crustal depths, the Sierra Madre fault zone appears to sole into a master décollement that terminates northward at the San Andreas fault and projects southward beneath the San Gabriel Valley to the Puente Hills blind thrust fault. (4) The dip and depth extent of the San Andreas fault along line 1 dips steeply (∼83°) northward and extends to at least the Moho. (5) The subsurface lateral extent of the Pelona Schist in southern California is as follows. Along line 1, the Pelona Schist underlies much, if not all of the San Gabriel Mountains south of the San Andreas fault to middle-crustal depths. North of the San Andreas fault, it is apparently not present along the transect.

California↗
USGS2007

Crustal structure of the Alaska Range orogen and Denali fault along the Richardson Highway

A suite of geophysical data obtained along the Richardson Highway crosses the eastern Alaska Range and Denali fault and reveals the crustal structure of the orogen. Strong seismic reflections from within the orogen north of the Denali fault dip as steeply as 25° north and extend downward to depths between 20 and 25 km. These reflections reveal what is probably a shear zone that transects most of the crust and is part of a crustal-scale duplex structure that probably formed during the Late Cretaceous. These structures, however, appear to be relict because over the past 20 years, they have produced little or no seismicity despite the nearby Mw = 7.9 Denali fault earthquake that struck in 2002. The Denali fault is nonreflective, but we interpret modeled magnetotelluric (MT), gravity, and magnetic data to propose that the fault dips steeply to vertically. Modeling of MT data shows that aftershocks of the 2002 Denali fault earthquake occurred above a rock body that has low electrical resistivity (>10 ohm-m), which might signify the presence of fluids in the middle and lower crust.

Special Paper of the Geological Society of America↗
USGS2015

Cenozoic stratigraphy and structure of the Chesapeake Bay region

The Salisbury embayment is a broad tectonic downwarp that is filled by generally seaward-thickening, wedge-shaped deposits of the central Atlantic Coastal Plain. Our two-day field trip will take us to the western side of this embayment from the Fall Zone in Washington, D.C., to some of the bluffs along Aquia Creek and the Potomac River in Virginia, and then to the Calvert Cliffs on the western shore of the Chesapeake Bay. We will see fluvial-deltaic Cretaceous deposits of the Potomac Formation. We will then focus on Cenozoic marine deposits. Transgressive and highstand deposits are stacked upon each other with unconformities separating them; rarely are regressive or lowstand deposits preserved. The Paleocene and Eocene shallow shelf deposits consist of glauconitic, silty sands that contain varying amounts of marine shells. The Miocene shallow shelf deposits consist of diatomaceous silts and silty and shelly sands. The lithology, thickness, dip, preservation, and distribution of the succession of coastal plain sediments that were deposited in our field-trip area are, to a great extent, structurally controlled. Surficial and subsurface mapping using numerous continuous cores, auger holes, water-well data, and seismic surveys has documented some folds and numerous high-angle reverse and normal faults that offset Cretaceous and Cenozoic deposits. Many of these structures are rooted in early Mesozoic and/or Paleozoic NE-trending regional tectonic fault systems that underlie the Atlantic Coastal Plain. On Day 1, we will focus on two fault systems (stops 1–2; Stafford fault system and the Skinkers Neck–Brandywine fault system and their constituent fault zones and faults). We will then see (stops 3–5) a few of the remaining exposures of largely unlithified marine Paleocene and Eocene strata along the Virginia side of the Potomac River including the Paleocene-Eocene Thermal Maximum boundary clay. These exposures are capped by fluvial-estuarine Pleistocene terrace deposits. On Day 2, we will see (stops 6–9) the classic Miocene section along the ~25 miles (~40 km) of Calvert Cliffs in Maryland, including a possible fault and structural warping. Cores from nearby test holes will also be shown to supplement outcrops.

Chesapeake Bay↗
USGS2003

Brittle structures and their role in controlling porosity and permeability in a complex Precambrian crystalline-rock aquifer system in the Colorado Rocky Mountain front range

Expansion of the Denver metropolitan area has resulted in substantial residential development in the foothills of the Rocky Mountain Front Range. This type of sub-urban growth, characteristic of much of the semiarid intermountain west, often relies on groundwater from individual domestic wells and is exemplified in the Turkey Creek watershed. The watershed is underlain by complexly deformed and fractured crystalline bedrock in which groundwater resources are poorly understood, and concerns regarding groundwater mining and degradation have arisen. As part of a pilot project to establish quantitative bounds on the groundwater resource, an outcrop-based geologic characterization and numerical modeling study of the brittle structures and their controls on the flow system was initiated. Existing data suggest that ground-water storage, flow, and contaminant transport are primarily controlled by a heterogeneous array of fracture networks. Inspections of well-permit data and field observations led to a conceptual model in which three dominant lithologic groups underlying sparse surface deposits form the aquifer system-metamorphic rocks, a complex array of granitic intrusive rocks, and major brittle fault zones. Pervasive but variable jointing of each lithologic group forms the "background" permeability structure and is an important component of the bulk storage capacity. This "background" is cut by brittle fault zones of varying structural styles and by pegmatite dikes, both with much higher fracture intensities relative to "background" that likely make them spatially complex conduits. Probabilistic, discrete-fracture-network and finite-element modeling was used to estimate porosity and permeability at the outcrop scale using fracture network data collected in the field. The models were conditioned to limited aquifer test and borehole geophysical data and give insight into the relative hydraulic properties between locations and geologic controls on storage and flow. Results from this study reveal a complex aquifer system in which the upper limits on estimated hydraulic properties suggest limited storage capacity and permeability as compared with many sedimentary-rock and surficial-deposit aquifers.

Geological Society of America Bulletin↗
USGS2004

Geophysical and isotopic mapping of preexisting crustal structures that influenced the location and development of the San Jacinto fault zone, southern California

We examine the role of preexisting crustal structure within the Peninsular Ranges batholith on determining the location of the San Jacinto fault zone by analysis of geophysical anomalies and initial strontium ratio data. A 1000-km-long boundary within the Peninsular Ranges batholith, separating relatively mafic, dense, and magnetic rocks of the western Peninsular Ranges batholith from the more felsic, less dense, and weakly magnetic rocks of the eastern Peninsular Ranges batholith, strikes north-northwest toward the San Jacinto fault zone. Modeling of the gravity and magnetic field anomalies caused by this boundary indicates that it extends to depths of at least 20 km. The anomalies do not cross the San Jacinto fault zone, but instead trend northwesterly and coincide with the fault zone. A 75-km-long gradient in initial strontium ratios (Sri) in the eastern Peninsular Ranges batholith coincides with the San Jacinto fault zone. Here rocks east of the fault are characterized by Sri greater than 0.706, indicating a source of largely continental crust, sedimentary materials, or different lithosphere. We argue that the physical property contrast produced by the Peninsular Ranges batholith boundary provided a mechanically favorable path for the San Jacinto fault zone, bypassing the San Gorgonio structural knot as slip was transferred from the San Andreas fault 1.0-1.5 Ma. Two historical M6.7 earthquakes may have nucleated along the Peninsular Ranges batholith discontinuity in San Jacinto Valley, suggesting that Peninsular Ranges batholith crustal structure may continue to affect how strain is accommodated along the San Jacinto fault zone. ?? 2004 Geological Society of America.

Geological Society of America Bulletin↗
USGS2017

The Valmy thrust sheet: A regional structure formed during the protracted assembly of the Roberts Mountains allochthon, Nevada, USA

A synthesis of field, biostratigraphic, detrital zircon geochronologic, and remote sensing data across north-central Nevada, United States, defines a thick, regionally extensive sheet of Middle–Upper Ordovician Valmy Formation quartzite that structurally overlies deformed early Paleozoic units of the Roberts Mountains allochthon. Late Paleozoic regional unconformities that record tectonic disruptions have been recognized in the foreland of central and eastern Nevada and locally within the Roberts Mountains allochthon; these identify multiple, regional tectonic events between the Devonian–Mississippian initiation of the Antler orogeny and the Permian–Triassic Sonoma orogeny. However, few studies have documented the regional kinematic history of the Robert Mountains allochthon sensu stricto. In the Independence Mountains of northern Nevada, emplacement of the Roberts Mountains allochthon is restricted to the Mississippian. In the Tuscarora Mountains, the range west and southwest of the Independence Mountains, several deformation events have been identified, and emplacement of the thrust sheet containing the Valmy Formation is restricted to the Late Pennsylvanian–Early Permian. These structural and temporal relations, reflected in the Antler foreland basin adjacent to the Roberts Mountains allochthon and overlap sequences, suggest that the Roberts Mountains allochthon is a composite stratigraphic terrane assembled along the Cordilleran margin during two or more late Paleozoic contractional events. Valmy Formation deposits likely represent the development of coalescing submarine fans below or within bypass channels in a deep slope or rise environment. Petrographic characteristics, biostratigraphy, and detrital zircon U-Pb age populations of the Valmy Formation link it to coeval slope and rise turbidites of the Vinini Formation and shelfal Eureka Quartzite; Valmy Formation detrital zircon age populations are dissimilar to the rift-to-drift facies of the Neoproterozoic–Cambrian Prospect Mountain Quartzite. Throughout north-central Nevada, the Valmy Formation is in fault contact with units of the Roberts Mountains allochthon, including the Devonian–Mississippian Slaven Chert, Silurian–Devonian Elder Sandstone, and Cambrian(?)–Ordovician Vinini Formation, which were deformed prior to, or during, emplacement of the thrust sheet containing Valmy Formation quartzite. Our mapping and data synthesis, guided by regional quartz maps based on remote sensing (Advanced Spaceborne Thermal Emission and Reflection Radiometer [ASTER]) data, delineate similar structural relationships discontinuously for >200 km along strike of the Roberts Mountains allochthon. Exploration for concealed gold deposits within reach of drilling requires knowledge of the relative thicknesses of the Roberts Mountains allochthon and the Valmy Formation. Overall thicknesses of deformed Roberts Mountains allochthon units between the Valmy Formation and underlying carbonate rocks, which host large, world-class Carlin-type gold deposits, vary by hundreds of meters, but are generally less than 700 m in three of the areas studied here. Recognition of windows through and klippen of the Roberts Mountains allochthon is essential for identification of areas where deposits may be at or near the surface. Correspondingly, most ongoing exploration for Carlin-type gold deposits subjacent to the Roberts Mountains allochthon targets concealed deposits. The model proposed in this study is applicable to determining depth to rocks prospective for undiscovered deposits.

Nevada↗
USGS2024

Upper crustal seismic velocity structure of the Hayward fault zone, San Francisco Bay, California, USA: Results from the 2016 East Bay Seismic Experiment (EBSI-16)

We developed Vp, Vs, Vp / Vs ratio, and Poisson’s ratio models of the uppermost crust (<4 km depth) from the eastern San Francisco (SF) Bay (California, USA) to near the Calaveras fault along a 15-km-long, linear profile. Upper crustal velocities are highly variable beneath, west, and well east of the Hayward fault. We observe eight notable features, from west to east: (1) Near San Francisco Bay, there is an ~2-km-wide structure with high Vp / Vs ratios (up to 5) and Poisson’s ratios (up to 0.48) extending from the surface to the base of our model, which we suggest the structure is a near-vertical fault that lies along a straight-line projection between the Silver Creek fault to the south and the Point Richmond fault to the north. The structure may be part of an ~90-km-long fault along the eastern SF Bay. (2) The western East Bay Plain, the lower lying area between the bay and the hills, includes up to 800 m of low-velocity sediments ( Vp ~1600–3000 m/s, Vs ~500 m/s to ~1000 m/s), underlain by higher velocity basement rocks ( Vp ~3000–5800 m/s; Vs ~1000–1500 m/s). (3) Between ~1 km and 3 km east of the Bay shoreline, sediments thin in a series of steps (likely faults) toward the Hayward fault. (4) Between ~3 km west and ~1 km east of the Hayward fault (at the East Chabot fault) at depths greater than 1 km, basement Vp (up to 6000 m/s) and Vs (up to 2800 m/s) are high, and Vp / Vs ratios (<2) and Poisson’s ratios (<0.3) are low, suggesting crystalline rocks. Furthermore, a near-vertical zone of low Vp / Vs ratios and Poisson’s ratios is between near-surface traces of the Hayward and East Chabot faults, likely corresponding to the San Leandro Gabbro of Ponce et al. (2003) . (5) Eastward of the East Chabot fault in the upper 1.5 km, basement Vp (~3000 m/s to ~4200 m/s) and Vs (~1200–2000 m/s) are lower than those west of the fault. (6) In the eastern Hayward/Oakland Hills, there are zones of laterally varying, high- and low-velocity ( Vp ~2500–3000 m/s) Jurassic–Cretaceous and Tertiary sediments in the shallow subsurface that likely extend much deeper than imaged. (7) Seismic energy that propagates westward from sources east of the Hayward fault (HF) appear weaker than energy that propagates eastward from sources west of the HF, suggesting that the HF acts as a partial barrier to shallow seismic energy propagation into the more populated eastern SF Bay area. (8) Unlike many fault zones, it appears that the active trace of the Hayward fault (in our study area) is not cored by a prominent, low-velocity zone relative to rocks to the east and west of the active trace. However, the active trace does mark a prominent change from relatively higher velocities to the west and lower velocities to the east.

California↗
USGS2022

Geologic and geomorphic evidence for multi-phase history of strands of the San Andreas fault through the San Gorgonio Pass structural knot, southern California

The San Gorgonio Pass region of southern California is a locus of extensive Quaternary deformation within a multi-strand section of the San Andreas fault zone. The geomorphology of the San Gorgonio Pass region reflects the complicated history of geologic events in the formation of this structurally complex region. We define fault-bounded blocks in San Gorgonio Pass and focus on two that are characterized by extensive crystalline bedrock outcrops with similar bedrock lithologies. These two blocks are separated by the San Bernardino strand of the San Andreas fault. Morphometric variables, including local relief, slope, slope distribution, and surface roughness, consistently demonstrate distinctions between the bedrock upland regions of the two blocks. Geologic observations of the region highlight differences in Quaternary units within the two blocks, reflective of the differing surficial processes active in each block. Within the Kitching Peak block, the morphology highlights a lineament that we informally name the Lion Canyon lineament. This boundary more clearly differentiates the two regions, as compared to the mapped San Bernardino strand, and may represent the previously active strand or bounding structure in this section. The distinction in morphology and surficial processes leads to our interpretation that the Kitching Peak and Pisgah Peak blocks have experienced different uplift histories. This further leads to the conclusion that the San Bernardino strand, broadly defined, has been integrated, at some point in the past, with the Banning strand, allowing for through-going rupture along the fault system. This connectivity may have occurred along the Burro Flats section of the San Bernardino strand or the Lion Canyon lineament. The fault connection along the mapped trace of the San Bernardino strand is not currently evident at the surface, however, suggesting that the integration has been disrupted. We propose this is due to intervals of N-S compression in the region, manifest as slip along the San Gorgonio Pass fault zone and other regional faults. We present evidence for lateral displacement along the San Bernardino and Banning strands of the San Andreas fault, discuss the implications of these displacements, and propose a sequence of fault activity, including multiple phases of activity along the San Bernardino and Banning strand pathway to account for the structural complexity and lack of surficial fault continuity.

California↗
USGS2024

Collision structures of the Prince William terrane and Chugach terrane docking along the Shumagin and Unimak convergent margins, Alaska, USA

Western Alaska’s convergent margins are composed of tectonostratigraphic terranes. On land, terrane assembly is recognized along boundaries or sutures between neighboring geologic elements with distinctly different origins. In marine areas where rock outcrops are covered by sediment, recognizing terrane sutures is problematic. A fault in seismic dip line 5 of the ALEUT project has been interpreted as a terrane suture. It is imaged intermittently down to the 30+-km-deep plate interface. Processing of ALEUT strike line 7 revealed the suture at ~18 km depths extending 300 km along the margin. Upper structures in line 5 are like the structures of adjacent seismic transects where imaging is only 8−10 km deep. They were previously not recognized as the upper reaches of terrane sutures and show structural details obscured at greater depths. The composite data are the basis for a simple tectonic model of terrane docking.

Alaska↗
USGS1990

Age and depositional setting of siliceous sediments in the upper Paleozoic Havallah sequence near Battle Mountain, Nevada; Implications for the paleogeography and structural evolution of the western margin of North America

The upper Paleozoic Havallah sequence of central Nevada is a folded and thrust-faulted association of greenstone, siliceous marine sedimentary rocks, and deep-water clastic rocks. Microfossil assemblages (radiolarians, sponge spicules, and conodonts) are used as tools to unravel the stratigraphy and to interpret the paleoenvironments of the siliceous sedimentary rocks. Nine radiolarian assemblages (Osagean to Guadalupian) are described and used for delineation and correlation of fault-bounded lithotectonic units. The biostratigraphic zonation reveals that the oldest rocks in each lithotectonic unit are progressively younger from the structurally highest to the lowest units, suggesting progressive west-to-east upsection stepping of the Golconda sole thrust with accretion of each unit. Analyses of the radiolarian and sponge spicule faunas permit lateral and temporal comparisons of depositional environments. The lower structural units are coarsening-upward sequences of hemipelagic slope deposits overlain by sponge spicule-rich turbidites derived from a shallow source. The uppermost structural unit is a coarsening-upward basinal sequence. Permian sponge spicules in turbidites of the slope sequences and redeposited fusulinids in the basin sequence are similar to those in adjacent autochthonous (North American) regions. Permian radiolarians and sponge spicules in hemipelagic siliceous argillite of the slope sequences are similar to those in the Northern Sierra terrane to the west; the Havallah basin and the Northern Sierra arc terrane were overlain, therefore, by a similar water mass and may have been in proximity during the Permian. Clastic dikes and sills containing volcanic, metamorphic, and sedimentary rock clasts are Leonardian or younger.

Nevada↗
USGS1994

Faults and structure in the Pierre Shale, central south Dakota

Numerous faults observed at the surface and (or) determined by geometric and geophysical methods to be present as much as several hundred meters below the surface (near-surface faults) have been mapped in a 2,000-km 2 area west of Pierre, S. Dakota. Many of these faults surround an east-west-trending structural high that has been mapped on the lower part of the Virgin Creek Member of the Pierre Shale. Generally, the geometry and displacement of many of the faults precludes slumping from surficial erosion as a mechanism to explain the faults. Seismic-reflection data indicate that several of the faults directly overlie faults in Precambrian basement that have cumulative vertical displacements of as much as 340 m. The structural high is interpreted to have been uplifted by displacements along faults that cut Upper Cretaceous sedimentary rocks. Recent low-level seismicity and fluvial-geomorphic studies of stream patterns, gradients, and orders suggest that rejuvenation of drainages may be taking place as a result of rebound or other tectonic activity. The studies indicate that repeated uplift and subsidence may have been the cause of extensive faulting mapped in the Pierre Shale since its deposition in Cretaceous time. Surficial fault displacements that cause damage to engineered structures are thought to be the result of construction-induced rebound in the Pierre Shale, although tectonic uplift cannot be ruled out as a cause.

Special Paper of the Geological Society of America↗
USGS2003

Neutron powder diffraction studies as a function of temperature of structure II hydrate formed from propane

Neutron powder diffraction data confirm that hydrate samples synthesized with propane crystallize as structure type II hydrate. The structure has been modeled using rigid-body constraints to describe C3H8 molecules located in the eight larger polyhedral cavities of a deuterated host lattice. Data were collected at 12, 40, 100, 130, 160, 190, 220, and 250 K and used to calculate the thermal expansivity from the temperature dependence of the lattice parameters. The data collected allowed for full structural refinement of atomic coordinates and the atomic-displacement parameters.

Canadian Journal of Physics↗