USGS Science⌕ Search

SEARCH · USGS Science

Results for “Stratigraphy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS1974

Stratigraphy and nahcolite resources of the saline facies of the Green River Formation, Rio Blanco County, Colorado

Based on a study of 10 drill cores, a sequence of oil shale and associated nahcolite, nearly 2,000 feet thick, in the lacustrine Green River Formation (Eocene) in the Piceance Creek basin, Rio Blanco County, Colo., was divided in ascending order into zones 1 to 13, B-groove, Mahogany zone (with lower, middle, and upper parts), and A-groove at the top. The odd-numbered zones and the Mahogany zone are mappable subsurface units of relatively thick oil shale and are distinguished from the even-numbered zones and A- and B-grooves which are thinner units of oil shale of lower grade. Large amounts of nahcolite found in zones 5 to 12 occur in (1) coarse-grained crystalline aggregates scattered through oil shale, (2) laterally continuous units of fine-grained crystals disseminated in oil shale, (3) brown microcrystalline beds, and (4) white coarse-grained beds that grade laterally into halitic rocks toward basin center. The original .upper limit of the nahcolite and halitic rocks is not yet completely known, but the present top is marked by a dissolution surface. Above this surface the rocks, extending from zones 11 or 12 upward into the Mahogany zone, form a water-saturated 'leached zone,' a geohydrologic unit in which large amounts of water-soluble minerals probably mostly nahcolite, and halite, were removed by ground-water dissolution. Rocks in the leached zone, mostly oil shale, are commonly broken and fractured and contain crystal cavities and solution breccias. Several solution breccias can be traced laterally into unleached beds of nahcolite and halite. Although evidence of salines is found in rocks above A-groove, the original saline facies that includes most of the bedded deposits extends from zone 5 upward into A-groove. Potentially ruinable beds of white nahcolite as much as 12 feet thick are found at depths of 1,560 or more feet below the surface. Some thicker beds of high-grade nahcolite are believed to be too close to the dissolution surface for safe room-and-pillar mining. Probably the most economical method of mining nahcolite would be as a coproduct of a shale-oil industry. Removal of nahcolite prior to retorting increases significantly the grade of oil shale by as much as 1.6 times, Several zones are more than 300 feet thick and average 30 or more weight percent nahcolite. Resources of nahcolite per square mile range as high as 489 million short tons. The total nahcolite resource in the basin is conservatively estimated at 32 billion short tons, which makes it the secondlargest deposit of sodium carbonate known .in the world.

Open-File Report↗
USGS1975

Stratigraphy and paleontology of coal beds in the Ghazij Shale, Sor Range-Daghari Coal Field, Quetta Division, Pakistan

Coal mine tunnels and surface sections in the Ghazij Shale of early Eocene age in the coal field near Quetta, Pakistan, were sampled in detail in order to make a foraminiferal analysis. This analysis and consequent correlations suggest that the coal seams are lenticular and have little lateral continuity. The planktonic Foraminifera date the geologic age of the coal-bearing sequences as early Eocene. Other Foraminifera indicate the shallow-water environment of deposition of the coal. Evidence is presented to show that coal was deposited in a series of unconnected swamps or marshes.

Quetta↗
USGS1975

Stratigraphy and mineralogy of laterite beds near Ziarat, Quetta Division, Pakistan

Ferruginous aluminous laterite beds crop out in the Ziarat-Loralai area east of Quetta for a strike length of about 60 miles. The beds are steeply dipping, sometimes overturned and faulted, and have an average thickness of 8 feet. Detailed mineralogical and chemical analyses were made on chip-channel samples from four sections of the laterite in the vicinity of the village of Ziarat. One of the sections, 9 1/2 miles southeast of Ziarat, is 21 feet thick and has an average content of 42 percent available alumina, 3.6 percent silica, and 31 percent Fe 2 0 3 . The other sections have an average available alumina content of less than 32 percent. The alumina minerals present are mostly boehmite and diaspore, with minor amounts of kaolinite. The laterite beds, which are between the Dunghan Formation of Paleocene age and the Parh Limestone of Cretaceous age, appear to mark the Cretaceous-Tertiary boundary; if this relationship is confirmed by further work, it would be of considerable assistance in prospecting for aluminous rocks in this and other parts of Pakistan.

Ziarat↗
USGS1976

Stratigraphy and petroleum possibilities of lower Upper Devonian (Frasnian and lower Famennian) strata, Southwestern Utah

The lower Upper Devonian rocks in southwestern Utah--the Guilmette Formation and equivalents--represent a final regressive pulse of the major Late Devonian marine inundation of the Western Interior of the United States and record marine carbonate deposition on a wide continental shelf. They consist primarily of limestone, dolomite, and quartz arenite deposited in a shallow north-trending miogeosyncline, which constituted a single major basin of accumulation on this shelf. The Guilmette Formation and equivalents were deposited in shallow normal to hypersaline marine waters. The environments of deposition include: a moderate- to high-energy intertidal environment, a moderate-energy subtidal environment, a lower energy, deeper subtidal environment below effective wave base, and a high-energy environment in local shallow areas of mud mounds and bioherms. The carbonate deposition of the Guilmette Formation and equivalents was interrupted periodically by the deposition of quartz arenites. These may represent the breaking up of the miogeosynclinal-cratonic pattern of deposition. In most areas, the Guilmette and equivalents are overlain by a thin transgressive marine quartz arenite deposit--the Cove Fort Quartzite and basal Leatham equivalent. Previous paleontologic evidence indicated a general Middle to Late Devonian age for the Guilmette Formation. The present study narrows this range and suggests that the age of the Guilmette Formation and its equivalents is late Middle Devonian (Stringocephalus brachiopod zone) to early Late Devonian (Uppermost Palmatolepis gigas conodont zone). Available subsurface data suggest that the petroleum possibilities of the Guilmette Formation and equivalents in southwestern Utah are poor. Several tests have penetrated .the interval with only minor shows of oil in rocks with low porosity and permeability. Nevertheless, many outcrop samples of the same interval, appear to have excellent porosity and permeability and a strongly fetid odor,

Utah↗
USGS1978

The structure and stratigraphy of the Pen Argyl Member of the Martinsburg Formation in Lehigh and Berks counties, Pennsylvania

The Pen Argyl Member, the upper claystone slate member of the Martinsburg Formation, was studied in three quadrangles in Lehigh and Berks Counties, Pennsylvania. Graptolites collected from the Pen Argyl Member at Lehigh Gap indicate a lower Upper Ordovician (Edenian-Maysvillian) age for the Pen Argyl Member. The Pen Argyl Member in this area is located on the normal limb and in the brow of the large, recumbent Musconetcong nappe. It is a deep water flysch deposit emplaced by turbidity currents from a southeasterly source. Sedimentologic and structural evidence show that the Pen Argyl member overlies the sandy middle Ramseyburg Member, thus supporting the tripartite subdivision of the Martinsburg Formation. Field and thin section study indicates that the penetrative slaty cleavage formed in an indurated rock probably by pressure solution and neocrystallization under lower greenschist facies metamorphism. Strain-slip cleavage formed as a result of a stress couple operating parallel to the slaty cleavage that transposed the slaty cleavage into a more spaced cleavage. Both cleavages are believed to have formed within the same stress continuum and in close succession. Analysis of the folds in the Pen Argyl Member indicate six phases of major and minor folding. The earliest folding, F1, resulted in the development of the recumbent nappe. F2 folds can only be determined statistically; these axes plunge either northeast or southwest Asymmetric folds, F3, and associated F4 crenulations formed within the same stress continuum. F5 folds are large open folds and are exemplified by the Mosservi!le anticline. Kink folds, F6 and associated crenulations are fault related and were the last folds to form. Faults in the Pen Argyl Member range from small displacements along slaty cleavage to large reverse faults. The largest of these, the Eckville fault, is recognized throughout the three quadrangle area. It is a high angle reverse fault that separates the Shochary sequence from the Pen Argyl member to the north. Detailed fabric analysis of the Pen Argyl Member indicates that (1) the strike of the slaty cleavage is consistent throughout the study area, (2) bedding strikes are undulose indicating that the rocks were folded prior to slaty cleavage development, (3) slaty cleavage-bedding intersections indicate an early northeast-southwest fold set and a later east-west trend of fold axes, and (4) slaty cleavage-strain-slip cleavage intersections indicate two periods of strain-slip cleavage development, the later period being fault related. Synthesis of field work and fabric data suggest that the Pen Argyl Member was deposited in the waning stages of flysch deposition during the Taconic orogeny. The nappe, F1, was formed at this time as a result of stress generated by plate convergence to the southeast. Further Taconian deformation of the normal limb of the nappe resulted in the northeast-southwest plunging F2 folds. Initial Alleghenian deformation resulted in the F3 asymmetric folds and slaty cleavage, S1. Later in the same stress continuum the F4 crenulations and strain-slip cleavage, S2, formed. Subsequently, F5 open folding occurred. Kink folds and crenulations, F6, and strain-slip cleavage, S3, formed in conjunction with late Alleghenian reverse faults such as the Eckville fault.

Open-File Report↗
USGS1978

Stratigraphy of the Cache Formation (Pliocene and Pleistocene) in Clear Lake Basin, Lake County, California

Recent geologic mapping in the Clear Lake basin shows that the nonmarine Cache Formation can be subdivided into several members. New names are herein informally used for three distinct deposits called the B, L, and K members. The three members are geographically separate, except where the L member locally unconformably overlies the B member. This study of the Cache Formation provides a framework for understanding the late Cenozoic tectonic, geologic, and climatic histories of the Clear Lake, California, area. The B member is characterized by cross-stratified sandstone with interbedded reddish-brown conglomerate around the margins of the basin, and by gray sandstone and persistent, light-olive-gray conglomerate lower in the section, as it is exposed in the center of the basin. Minor amounts of basaltic tuff are present near the top of the B member in the Clear Lake basin. The B member has a maximum thickness of at least 1,500 m and represents dominantly fluvial and minor lacustrine deposition. This Blancan (Pliocene and early Pleistocene(?)) unit was deposited in a fault-controlled, subsiding basin. The L member is a heterogeneous deposit of pebble conglomerate, sandstone, siltstone, calcareous siltstone, limestone, tuff, and diatomite. This lacustrine unit has a maximum thickness of at least 130 m, and is mid-Pleistocene in age. The K member is composed of lacustrine sandstone and siltstone, and locally interbedded fluvial pebble conglomerate and sandstone. Several tuffs, including the tuff of Adobe Creek, an informally named marker bed, occur in the K member. The K member has a maximum thickness of at least 140 m and is mid-Pleistocene in age. The presence of fossil leaves and cones that represent growth during warm and cold climates indicate that the K member was deposited during both interglacial and glacial climatic conditions. The tuff of Adobe Creek of the K member has been recognized in water wells west and north of surface exposures of the K member. The B member is probably correlative with the Tehama Formation and is apparently unrelated to the sediment of Clear Lake. The L and K members intertongue with and are underlain by flows of the Clear Lake Volcanics. The L and K members are dominated by partly coeval lacustrine deposits that were possibly deposited in different subbasins of the same lake, and are possibly correlative with sediment concealed beneath Clear Lake.

California↗
USGS1979

Petrology and stratigraphy of Paleogene nonmarine sandstones, Cascade Range, Washington

The Cascade Range of Washington north of 47? latitude is composed of probable Paleozoic and Mesozoic metamorphic rocks and Mesozoic and Tertiary plutonic rocks. Several Paleogene nonmarine arkosic sandstone units fringe and in part occur within the complex crystalline core. The early to middle Eocene Chuckanut Formation is present on the west side of the crystalline core in the western foothills of the Cascades. The early to middle Eocene Swauk Formation partially encircles the Mt. Stuart massif of the central Cascades. In the western foothills of the Cascades, between the main body of Chuckanut Formation near Bellingham and the main outcrop area of the Swauk Formation south of Mt. Stuart, many smaller bodies of arkosic sandstone have variously been referred to either the Swauk or Chuckanut Formations. The early Eocene Manastash Formation occurs locally in an area south of the Yakima River. The middle to late Eocene Chumstick Formation is mostly confined to the Chiwaukum graben within the crystalline core and is separated from the Swauk Formation on the southwest by the Leavenworth Fault. The Oligocene Wenatchee Formation unconformably over lies the Chumstick Formation near Wenatchee. The middle to late Eocene Roslyn Formation crops out north of the Yakima River and is underlain by the Teanaway Basalt which separates the Roslyn from the older Swauk Formation. The middle Eocene to early Oligocene Naches Formation forms a north-trending body that crosses the Yakima River and is in fault contact with both the Swauk and Manastash Formations. The middle to late Eocene Puget Group underlies the Quaternary deposits of the Puget Lowland southeast of Seattle on the western flank of the Cascades. The various formations are all composed predominantly of fine- to medium-grained sandstones with lesser amounts of interbedded shale, conglomerate and coal. Compositionally, the units are predominantly either feldspathic or litho-feldspathic subquartzose sandstones. Volcanic rocks are important constituents of the Puget Group, the Chumstick and Naches Formations, and the isolated arkosic bodies. The three older units, however, contain relatively less volcanic lithics to total lithics than do younger units, indicating perhaps the initiation of more widespread volcanic activity in middle Eocene time. Ratios of framework grain parameters show that the terrestrial sandstone units were derived from a mixed plutonic and tectonic source terrane of continental block tectonic provenance with an overprint of magmatic arc provenance. Modal analysis was performed on samples from the various sedimentary units to establish petrologic compositions, and to provide data with which to compare the different units and discuss clast provenance and tectonic regimen. Although the arkosic sandstones have generally uniform framework clast compositions, minor yet significant differences do exist between the units. Basal or basement-onlap portions of the units in particular are locally derived and differ markedly from the overall compositions of the individual units. Many coincidences of composition, age, structure, and bedrock indicate that the Chuckanut and Swauk may have originally been deposited as a single unit that since has been offset approximately 160 kilometers by right lateral strike slip motion starting about 48 Ma. If this hypothetical offset did occur, then major movement on the Straight Creek Fault is bracketed between about 48 Ma and Oligocene time.

Open-File Report↗
USGS1979

Stratigraphy and paleoenvironment of Miocene phosphatic rocks in the East San Francisco Bay region, California

A stratigraphic study of the Monterey Group in the East San Francisco Bay Region, California, indicates that a depositional basin began to subside in early to middle Miocene time. The Miocene sea transgressed from the west or southwest, and the area subsided to a possible water depth of 500 to 2,500 m. The Monterey Group within the study area is a time-transgressive sequence of six sandstone and shale formations. Stratigraphic cycles of interbedded sandstone and shale formations are related to the amount of terrigenous sediment input into the basin as well as the depositional environment. During periods of low terrigenous sedimentation, biogenetic sedimentation in the form of diatomite layers were interbedded with hemipelagic muds and thin turbidite sands. These diatom-rich sediments were probably deposited within the upper bathyal zone (180 to 500 m) and, during lithification, diagenetically altered to form siliceous shales and cherts. As terrigenous sedimentation increased, probably due to periodic uplift east of the study area, biogenetic sedimentation was masked until finer grained sediment at a lower rate of deposition reoccurred. As the basin filled and a higher energy environment prevailed; coarse-grained sediment was again deposited until a lower energy environment resumed. Three types of inorganic phosphate are present within the study area: nodular, Pelletal, and pebbles of sandy phosphatic mudstone. The nodular phosphate is associated with the siliceous shale formations and formed within diatomite layers before compaction and lithification. The other two types of phosphate are found within the sandstone formations and probably originated in a shallower, higher energy environment than the siliceous shales. Faulting was active during middle to late Miocene time. The change in stratigraphic thickness across the Mission fault is 350 m which may approximate the vertical (?) displacement along this fault. This displacement took place in middle to upper Miocene time and apparently caused erosion of the upper formations of the Monterey Group on the west side of the Mission fault before the Briones Formation was deposited in late Miocene time. Depositional thinning of the Monterey Group in the southern portion of the study area may imply that the Hayward and Calaveras faults were also active at this time.

Open-File Report↗