USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing Applications: Society and Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,658 records · Page 34Linked to original sources
USGS2025

Estimated average annualized losses from potential building damage and fatalities due to earthquake-generated tsunamis in the United States

Earthquake-generated tsunamis represent substantial economic threats to states and territories in the United States (U.S.), but we are unaware of any effort to quantify potential impacts at the national level. This gap is partially due to the lack of nationally consistent data on tsunamigenic sources and associated return periods. This study addresses this issue and provides estimates of average annualized losses (AAL) for potential residential fatalities and capital stock losses associated with building damage (i.e., structural, non-structural, contents, and inventory damage) in the U.S. by curating tsunami-hazard information based on deterministic scenarios and probabilistic approaches, calculating potential losses, and estimating return periods where necessary. This assessment was done for the U.S. West Coast, Alaska, Hawaii, U.S. Pacific Territories, and U.S. Atlantic Territories. We estimate that earthquake-generated tsunamis that could affect these states and territories collectively represent $1 billion in potential AAL with 79 % of losses due to residential fatalities and 21 % of losses due to capital stock losses from building damage. We identify AAL variations based on county and county equivalents, states and territories, geographic regions, return periods, and departure-delay assumptions for evacuating residents. Results include high AAL values for potential fatalities in Puerto Rico and the U.S. Pacific Northwest region, high AAL values for potential building-related damage in Hawaii and California, and high building- and population-loss ratios for county equivalents in Alaska and U.S. territories.

International Journal of Disaster Risk Reduction↗
USGS2025

Comparing magmatism and hydrothermal alteration using magnetic modelling and stable isotopes at the Clementine porphyry copper prospect, Montana, USA

Recent mapping of the underexplored Clementine prospect in southwestern Montana has revealed evidence of hydrothermal alteration and mineralized breccia vein gossan interpreted to represent the upper expression of a Cretaceous, sediment-hosted copper porphyry system. The prospect is at the nexus of several Cretaceous granites, including the pre-mineralization Butte Granite and Big Hole Canyon plutons and local pre- to post-mineralization granite intrusions. Here, 3D magnetic inversions and stable isotope data are used to evaluate the spatial and genetic relationship of mineralization and Cretaceous magmatism. Magnetic inversions reveal a zone of high magnetic susceptibility beneath the prospect that is related to an exposure of unaltered, likely post-mineralization granite. The granite appears to connect to the Big Hole Canyon pluton at depth, suggesting it is a late-stage differentiate of the cooling, pre-mineralization pluton that may have been one of several potential heat sources for the mineral system at Clementine. This is supported by carbon isotope values of graphite that indicate organic material in shale of the Cretaceous Kootenai Formation was subject to metamorphism. Preliminary light hydrogen isotope values of actinolite hydrothermal orbs suggest formation following magmatic outgassing during thermal advection from an underlying intrusion.

Montana↗
USGS1997

Nutrients and pesticides in ground water of the Ozark Plateaus in Arkansas, Kansas, Missouri, and Oklahoma

A total of 229 ground-water samples were collected from 215 sites as part of the Ozark Plateaus study unit of the National Water-Quality Assessment Program. These samples were collected from 1993 through 1995 using a network of springs and wells with three scale-dependent components. The first component, the study-unit survey, consisted of 99 randomly selected springs and domestic wells in the Springfield Plateau and Ozark aquifers. The second component, two land-use studies, consisted of 42 springs and domestic wells in a poultry-dominated agricultural area and 40 springs and domestic wells in a cattle-dominated agricultural area overlying the Springfield Plateau aquifer. The third component, the small-watershed study, consisted of 4 springs, 18 domestic wells, and 11 monitoring wells in a small basin within the poultry land-use study area. Samples were analyzed for major ions, nutrients, dissolved organic carbon, methylene blue active substances, tritium, and 88 pesticides and metabolites.The water-quality data from these samples were analyzed with descriptive and statistical methods. Nitrite plus nitrate, which was detected more often and in greater concentrations than any of the other nutrients, ranged from less than 0.05 to 25 milligrams per liter as nitrogen. Nitrite plus nitrate concentrations positively correlated to percent agricultural land use around each site. Median nitrite plus nitrate concentrations generally were greater in samples from springs than in samples from wells. Concentrations of nitrite, ammonia, and ammonia plus organic nitrogen were also affected by land use and also by concentrations of dissolved oxygen in the ground water. Concentrations of phosphorus and orthophosphate probably were affected by land use and also by phosphorus solubility. Pesticides were detected in 80 of 229 samples from 73 of 215 sites. A total of 20 pesticides were detected with a maximum of 5 pesticides detected in any 1 sample. The most commonly detected pesticides were tebuthiuron, atrazine, prometon, desethylatrazine, and simazine. Maximum concentrations ranged from 0.003 to 1.0 microgram per liter. The occurrence and distribution of pesticides were related to land use. Percent agricultural land use was greater for samples with pesticides detected than for samples with no pesticides detected. Pesticides were detected more often in samples from springs than in samples from wells. The occurrence of pesticides also was related to seasonality and chemical characteristics, such as solubility and persistence, of the compounds.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS2024

Forecasting storm-induced coastal flooding for 21st century sea-level rise scenarios in the Hawaiian, Mariana, and American Samoan Islands

Oceanographic, coastal engineering, ecologic, and geospatial data and tools were combined to evaluate the increased risks of storm-induced coastal flooding in the populated Hawaiian, Mariana, and American Samoan Islands as a result of climate change and sea-level rise. We followed a hybrid (dynamical and statistical) downscaling approach to map flooding due to waves and storm surge at 10-square meter resolution along all 1,870 kilometers of these islands’ coastlines for annual (1-year), 20-year, and 100-year return-interval storm events and +0.00 meter (m), +0.25 m, +0.50 m, +1.00 m, +1.50 m, +2.00 m, and +3.00 m sea-level rise scenarios. We quantified the coastal flood depths and extents using the latest climate forcing from Intergovernmental Panel for Climate Change’s Sixth Assessment Report Coupled Model Intercomparison Project. The data generated using these methods provide stakeholders and decision makers with a spatially explicit, rigorous valuation of how, where, and when climate change and sea-level rise increase coastal storm-induced flooding to help identify areas where management and (or) restoration could potentially help reduce the risk to, and increase the resiliency of, the coastal communities in the populated Hawaiian, Mariana, and American Samoan Islands.

Hawaii↗
USGS2025

Noble and base metal distribution and processes affecting ore tenors in the disrupted lower stratigraphy of the Stillwater Complex, USA

Exploration continues for contact-style Ni-Cu sulfide and chromitite-associated PGE mineralization in ultramafic rocks of the Stillwater Complex. At the Iron and Chrome Mountain areas, massive sulfides occur along the complex’s footwall contact and anomalous concentrations of PGE+Au are associated with the three lowermost chromitite seams. Southeast of Chrome Mountain, magmatic layering is highly disrupted by the presence of faults, magmatic breccias, serpentinized discordant dunites, pyroxenite pegmatoids, and disaggregated chromitite seams. The bulk rock chemistry, sulfide chemistry, and noble metal mineralogy of samples from this area were examined to determine the deportment of PGE and processes that led to enrichments in PGE, Au, Cu, Co and Ni. Results show that a sulfide liquid was the principal collector of PGE. If sulfide liquid was initially deposited with chromite, it was disaggregated or redistributed by subsequent melt or fluid infiltration, which may have resulted in the offset of peak PGE(+Cu, Ni) from peak Cr 2 O 3 concentrations, and upgraded PGE tenors. Upon cooling, PGE exsolved from sulfides to form discrete bismuth tellurides, arsenides, arsenic sulfides, antimonides, and alloys, commonly along the margins of sulfide globules. Calculated metal tenors are highest in the disseminated sulfides southwest of Chrome Mountain, whereas massive and net-textured sulfides near the Iron Mountain-Camp zone represent monosulfide solid solution cumulates. At progressively shallower levels, higher metal tenors combined with lower S/Se ratios are consistent with increasing R-factors from 100 to 100,000. Serpentinization and talc-tremolite alteration resulted in S loss through partial replacement of sulfides by secondary silicate+carbonate+magnetite+sulfide assemblages, further upgrading Ni-Cu-PGE tenors. The present work shows that processes responsible for the disruption of magmatic layering and post-magmatic fluid alteration along the intrusion’s lower contact led to noble and base metal enrichments.

Montana↗
USGS2026

A roadmap for identifying and interpreting physical processes and national water model prediction bias associated with baseflow index regimes across the contiguous United States

Understanding how groundwater–surface water interactions shape streamflow variability is critical for diagnosing low flow behavior and prediction bias in continental scale hydrologic models. We present a process informed framework that links observed baseflow (BF) dynamics, watershed attributes, and National Water Model (NWM) performance across the contiguous United States. Using daily observed streamflow from 797 reference quality streamgages, we developed monthly baseflow index (BFI) signatures using a streamgage specific, calibrated digital filter. Hierarchical clustering of these signatures identified seven distinct BFI regimes capturing regional and seasonal variability. We evaluated NWM v3.0 retrospective streamflow performance within each regime using multiple hydrograph and flow duration curve-based metrics. Model skill varied systematically across regimes: mixed flow systems were simulated most accurately, while predominantly BF dominated and quickflow dominated regimes exhibited substantially poorer performance. Across nearly all regimes, the NWM underestimated observed BFI magnitude and frequently failed to reproduce seasonal BF patterns, indicating systematic biases in simulated low flow contributions. To relate these regimes to potential process controls, we trained a Random Forest classifier using static watershed attributes and applied Shapley Additive Explanations to identify features most strongly associated with each regime. Results highlight regionally varying influences, including the dominant role of snow fraction and seasonal runoff timing in snow dominated basins and the importance of evapotranspiration and aridity in quickflow dominated systems. Collectively, these findings demonstrate how hydrologic signatures combined with interpretable machine learning can diagnose regime specific model biases and generate process-based hypotheses about limitations in large scale hydrologic prediction systems.

contiguous United States↗
USGS2025

Updating and recalibrating the integrated Santa Rosa Plain Hydrologic Model to assess stream depletion and to simulate future climate and management scenarios in Santa Rosa, Sonoma County, California

The Santa Rosa Plain Hydrologic Model (SRPHM) was developed and published in 2014 through a collaboration between the U.S. Geological Survey (USGS) and Sonoma Water to analyze the hydrologic system in the Santa Rosa Plain watershed, help meet the increasing demand for fresh water, and prepare for future uncertainties in water resources. The original model simulated hydrological conditions and water use from water years 1975 to 2010. Recently (2023), the USGS, in cooperation with Sonoma Water and the California State Water Resources Control Board, updated the SRPHM model to extend its simulation period to the end of the 2018 calendar year, incorporate new estimates of rural and agricultural water use, and use efficient input format for climate variables. The updated model was recalibrated, and evaluation of the new model calibration is included in this report. This report presents the results of comparing the hydraulic heads, streamflow, and groundwater budget simulated by the updated model with those generated by the original model and observed data. The main difference in the simulated budget between the original and updated SRPHM is the estimates of agricultural pumping, rural domestic pumping, and return flow generated from rural water use that was not simulated in the original model. The revised agricultural pumping is simulated using the agricultural package, which constrains pumping to available groundwater. The use of the agricultural package leads to a more realistic estimation of agricultural water use, with revised agricultural pumping being one-third less than that in the original model. The revised rural pumping is about half of the pumping in the original model because of using detailed parcel data to estimate population density in rural areas instead of coarse census tracts. Overall, average total inflows for water years 2006–10 simulated by the updated model were about 2 percent less than the original model, and the average total updated outflows were nearly 5 percent less than the original model. The updated model was then used to generate stream depletion maps, simulate climate change scenarios during 2019–99, and simulate water rights allocation using the Model for Decision Support in Integrated River Basin Management (MODSIM). The results from simulating eight future climate scenarios indicated either an increase in groundwater storage or no significant change in the next 80 years, along with an increase in recharge, an increase in actual evapotranspiration in six out of eight climate projections, and an increase in surface runoff. The increases in the simulated future groundwater storage, recharge, evapotranspiration, and runoff in most climate projections are mainly driven by the projected increase in precipitation in most of the future climate scenarios. The updated model also was used to test a pilot case study demonstrating water-resource allocation among different users with different water rights using the integrated MODSIM-Groundwater and Surface-Water Flow Model (GSFLOW) platform. The updated SRPHM serves as a valuable tool for analyzing historical and future hydrologic conditions in the Santa Rosa Plain watershed and preparing for future uncertainties.

California↗
USGS2025

Lunar grid systems, coordinate systems, and map projections for the Artemis missions and lunar surface navigation

Foreward This document contains design specifications of a navigational standard for the Moon, including a Lunar Transverse Mercator system, a Lunar Polar Stereographic system, a Lunar Grid Reference System, and a unique coordinate structure, Artemis Condensed Coordinates, for Artemis mission navigation and lunar surface science. The National Aeronautics and Space Administration (NASA) Artemis campaign seeks to place humans on the Moon for the first time since the Apollo missions. Early Artemis missions are heavily focused on the lunar south pole, which promises to return valuable data on the Moon’s geologic record, amongst other mission objectives. Coordinate systems in use today for the lunar south pole provides crew members on the surface neither an efficient nor intuitive means to communicate their position and orientation. A novel grid coordinate system, the Lunar Grid Reference System, is proposed to address these concerns for use in real-time extravehicular activity operations on the lunar surface. The many stakeholders involved in the Artemis missions will need a common system to communicate position and orientation while astronauts are operating on the lunar surface. To that end, Artemis crew members will need that system to be efficient and intuitive to promote efficient extravehicular activity timelines and reduce confusion. In the context of this document, these characteristics are addressed on the design of lunar coordinate systems: Efficient.—The number of characters required to communicate a location within a desired precision level in both local and global contexts, and how many steps are required for a recipient or sender to interpret a location. Intuitive.—How well the system aligns with human perceptual abilities, and whether the system yields distances that have the same relationship to actual lunar surface distance in all directions from the point where a person is located. Technological systems are currently being investigated to supplement the crew members’ ability to locate and orient themselves and other assets on the lunar surface; however, it is unlikely that those systems will be fully operational for the first few landed missions. Even with future positional aids, crew members will still need an efficient and intuitive means to communicate position and orientation. In addition, if technological systems fail, the crews will require land navigation skills and have maps available, thus providing further motivation for a crew-centric coordinate system. The contents of this U.S. Geological Survey (USGS) document detail a comprehensive framework for standardizing lunar crewed surface navigation within NASA and outlines the protocols, methods, and designs necessary for achieving consistency and interoperability across relevant space mission teams and lunar surface navigators. Key components of this document include designs of map projections, projected coordinate reference systems (Lunar Transverse Mercator and Lunar Polar Stereographic systems), and a grid system (Lunar Grid Reference System and Artemis Condensed Coordinates) for the Moon. The work proposed in this document seeks to accomplish something similar to the National Geospatial-Intelligence Agency (NGA) document SIG 0012 (NGA, 2014a), but for using grid systems for the Moon. This report incorporates initial feedback and input from NASA’s Artemis Geospatial Data Team, NASA’s Flight Operations Directorate, National Geodetic Survey, USGS Astrogeology Science Center, and NGA and is intended to serve as a resource for all involved with the Artemis missions, as well as for engineers designing and operating lunar infrastructure.

Techniques and Methods↗
USGS2024

Afterslip and creep in the rate-dependent framework: Joint inversion of borehole strain and GNSS displacements for the Mw 7.1 Ridgecrest earthquake

The elusive transition toward afterslip following an earthquake is challenging to capture with typical data resolution limits. A dense geodetic network recorded the Mw 7.1 Ridgecrest earthquake, including 16 Global Navigation Satellite System (GNSS) stations and 3 borehole strainmeters (BSM). The sub-nanostrain precision and sub-second sampling rate of BSMs bridges a gap between conventional seismologic and geodetic methods, exemplified by atypical postseismic shear strain reversals observed at nearfield (<2 km) station B921 that remain unexplained. We jointly invert GNSS displacements and BSM strains for coseismic and postseismic slip spanning hours to months over 7 independent periods. Cosiesmically, our model resolves the largest slip magnitudes of up to 6.6 m on the mainshock rupture plane, with similar patterns to other inferred slip distributions. The foreshock fault appears to slip coincidently with mainshock, revealing potential asperities activated during the preceding Mw 6.4 event. Postseismically, the best-fitting models adhere to mechanical rate-and-state expectations of logarithmically decaying slip adjacent to the coseismic rupture terminus, and where deep rheologic conditions favor creep. Most spatial variation occurs in the early postseismic timeframe (<1–2 weeks), with evidence for regional rheologic control and static stress dependence. Triggered creep on the neighboring Garlock Fault unexpectedly persists for >178 days—further highlighting the importance of fault networks in postseismic stress redistribution, critical to assessing future hazard.

Journal of Geophysics Research↗
USGS1995

Water-quality assessment of the Ozark Plateaus study unit, Arkansas, Kansas, Missouri, and Oklahoma: Analysis of information on nutrients, suspended sediment, and suspended solids, 1970-92

Water-quality data collected during water years 1970-90 (October 1 to September 30) for 83 surface-water sites and during 1970-92 for 395 ground-water sites in the 48,000 square mile Ozark Plateaus study unit of the National Water Quality Assessment Program were analyzed using selected descriptive and statistical methods. The water- quality data include nutrient (nitrogen and phosphorus), suspended sediment, and suspended- solids data, and ancillary information such as fertilizer use, animal waste, sewage treatment plant, and land use. Statistically significant differences exist in surface-water quality that can be attributed to physiography, land use, and other effects. The sites that were considered to be substantially affected by sewage treatment plants had the largest concentrations of nutrients. Nutrient concentrations generally were larger at sites associated with agricultural basins than at sites associated with forested basins. Statistically significant differences existed in the quality of ground water that can be attributed to hydrogeologic and land-use effects. Nutrient concentrations generally were largest where the water source is indicated to be shallow in origin and where parts of the hydrogeologic units are in agricultural land-use areas. Water quality has changed at several surface-water sites since 1970. Nutrient concentrations appear to have increased at some sites and decreased at other sites. Causes of these apparent trends are not known, but many of the sites with apparent trends are in agricultural areas. Surface-water loads of nutrients and suspended sediment were affected by several factors including streamflow, climate, drainage area, reservoir operation, and inputs from point and nonpoint sources. Annual loads were largest in large basins, with large inputs of nutrients or sediment during periods of high streamflows at locations where reservoir operation effects are not substantial.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS2024

Seismicity zoning at Coso geothermal field and stress changes from fluid production and migration

The Coso geothermal field is a major geothermal power production site in the western United States. It has been observed that low-magnitude seismic events ( M < 3.71) are unevenly distributed in three distinct zones, namely, nearfield (<3 km), midfield (3–6 km), and farfield (> 6 km) from the Coso geothermal plant. These zones exhibit distinct changes in earthquake location before and during geothermal production episodes that began in 1986. After 1986, the midfield region of the main flank experiences a significantly lower seismicity rate than the surrounding areas before production episodes. During 2014–2019, the farfield earthquakes cluster in the eastern and western parts of the greater Coso area, which is discernably different from how those pre-production earthquake events were distributed along the conjugate NW-SE and SW-NW trending structures across the main flank. Here, we analyze the stage of stress with finite-element-based poroelastic simulations to illustrate how the spatiotemporal evolution of the seismicity is associated with the pattern of stress perturbations caused by fluid migration amid the operations of geothermal power plants. Generally, ∼70% of co-production seismicity is found in zones of increased Coulomb stress between 2014 and 2019 at >99% confidence. Meanwhile, the midfield zone of seismic paucity overlaps with the zone of decreasing pore-fluid pressure. Overall, the results provide a physical explanation of how decadal geothermal operations at Coso have perturbed stress-field changes and contributed to the evolving characteristic seismic pattern, shedding insights into assessing the seismic hazard in other geothermal settings.

California↗
USGS2025

Decomposing the Tea Bag Index and finding slower organic matter loss rates at higher elevations and deeper soil horizons in a minerogenic salt marsh

Environmental gradients can affect organic matter decay within and across wetlands and contribute to spatial heterogeneity in soil carbon stocks. We tested the sensitivity of decay rates to tidal flooding and soil depth in a minerogenic salt marsh using the Tea Bag Index (TBI). Tea bags were buried at 10 and 50 cm depths across an elevation gradient in a subtropical Spartina alterniflora marsh in Georgia (USA). Plant and animal communities and soil properties were characterized once, while replicate tea bags and porewaters were collected several times over 1 year. TBI decay rates were faster than prior litterbag studies in the same marsh, largely due to rapid green tea loss. Rooibos tea decay rates were more comparable to natural marsh litter, potentially suggesting that is more useful as a standardized organic matter proxy than green tea. Decay was slowest at higher marsh elevations and not consistently related to other biotic (e.g., plants, crab burrows) or abiotic factors (e.g., porewater chemistry), indicating that local hydrology strongly affected organic matter loss rates. TBI rates were 32 %–118 % faster in the 10 cm horizon than at 50 cm. Rates were fastest in the first 3 months and slowed 54 %–60 % at both depths between 3 and 6 months. Rates slowed further between 6 and 12 months, but this was more muted at 10 cm (17 %) compared to 50 cm (50 %). Slower rates at depth and with time were unlikely due to the TBI stabilization factor, which was similar across depths and decreased from 6 to 12 months. Slower decay at 50 cm demonstrates that rates were constrained by environmental conditions in the deeper horizon rather than the composition of this highly standardized litter. Overall, these patterns suggest that hydrological setting, which affects oxidant introduction and reactant removal and is often overlooked in marsh decomposition studies, may be a particularly important control on organic matter loss in the short term (3–12 months).

Georgia↗
USGS2024

Formation of vertical columnar seismic structures and seafloor depressions by groundwater discharge in the drowned Miami Terrace platform and overlying deep-water carbonates, southeastern Florida

The presence of vertical cross-formational fluid migration passageways within sedimentary basins can profoundly impact aquifer and reservoir fluid-flow and their identification is fundamental to informing management of subsurface fluid resources (groundwater, oil, gas). In an onshore and offshore southeastern part of Florida, 2D/3D seismic-reflection and bathymetry data document ∼153 vertical columnar structures composed of reflection disruptions up to 790 m in the height and averaging 360 m in diameter, and ∼219 subcircular to circular seafloor depressions up to 1334 m wide. Our study focuses on these features found within the offshore shallow-marine carbonate Miami Terrace platform, which drowned approximately at the end of the middle Miocene, and within overlying Plio-Quaternary deep-water carbonate slope and drift deposits. Most columnar structures are rooted in stratiform aquifers of the Miami Terrace platform and associated with faults or fault intersections produced by Eocene and circa late Miocene tectonics. The columns commonly terminate within the platform or as subcircular depressions along an amalgamated karstic and drowning unconformity at the platform top. The columns typically stretch upwards from a zone of deep karst cavity collapse through the Miami Terrace platform with upward decreasing sag on internal reflections. Following drowning and Plio-Quaternary partial burial of the Miami Terrace platform by deep-water deposits, the subcircular depressions and faults along the platform top were points of origin for a second phase of column growth upward into the deep-water deposits. The continuation of deep platform cavity collapse and column evolution produced pockmarks along paleo-seafloors within the deep-water deposits and at the present-day sea floor. The Plio-Quaternary pockmarks formed at water depths too deep to suggest an origin related to meteoric karst above or near sea level, but rather their formation is suggested to be related to cyclic sea level falls that drove increased groundwater head and density gradients, and seafloor discharge of offshore freshened groundwater sourced from the underlying platform. Plausibly, mixing of freshened groundwater and seawater at the seafloor discharge sites drove dissolution of the host deep-water deposits, which together with erosion by groundwater venting and current scouring formed the pockmarks. Seaward of the Plio-Quaternary seafloor pockmarks, at the late-middle Miocene upper slope of the Miami Terrace platform and along the regional karst/drowning unconformity is a slope-parallel band of ∼189 densely distributed subcircular seafloor depressions with diameters up to 1334 m at water depths up to ∼660 m. It is plausible that along the upper slope, faults and fractures produced by gravity-driven slope instability and possibly tectonics formed a dense network of fluid passageways that promoted upward artesian freshened groundwater flow to sites of discharge where mixing with seawater generated limestone dissolution and the depressions. But tectonic uplift may have forced emersion and initial meteoric sinkhole formation circa late Miocene with later enhancement by freshened groundwater discharge and bottom current erosion.

Florida↗
USGS2022

South Carolina and Landsat

South Carolina, the eighth State admitted to the union, transcends its size with its deep, rich history; striking beauty; vast natural resources; and extensive cultural diversity. Home to part of the Blue Ridge Mountains of the Central Appalachians, the Upstate is graced with more than 100 waterfalls, while the Lowcountry borders the Atlantic Ocean with 187 miles of coastline and 35 barrier islands. Forests cover two-thirds of the State, and forestry and agriculture together, as agribusiness, make up South Carolina’s leading industry. Two historic crops—cotton and tobacco—still rank in the top 10 commodities, though corn and soybeans now rank higher. Poultry, cattle, peanuts, and flowers also make the list. South Carolina’s population totals more than five million. Other residents include a variety of wildlife, bird, reptile, and fish species, including Ursus americanus (black bears), Alligator mississippiensis (American alligators), and Tursiops truncatus (bottlenose dolphins). More than 100 tree species also reside in South Carolina, which pays homage to one with its “The Palmetto State” nickname. South Carolina’s subtropical climate, long coastline, and lower elevations make it highly susceptible to tornado and hurricane activity and coastal flooding. Projected sea-level rise is a growing concern. A view from space can help monitor and manage natural resources on the land and in rivers, marshes, and the coast. Landsat reveals not just what an area looks like now, but also insights from decades ago.

South Carolina↗
USGS2024

Volcanic gas monitoring

Introduction As magma rises through the crust, decreasing pressure conditions allow volatiles to exsolve from the magma. These volatiles then migrate upward through the crust, where they can be stored at shallower levels or escape to the atmosphere. Rising magma also heats rock masses beneath volcanic centers, causing water in shallow aquifers and hydrothermal systems to boil and release additional gases and steam (see chapter F , this volume; Ingebritsen and Hurwitz, 2024). The chemistry and quantity of gases that reach the surface during periods of quiescence or volcanic unrest can reveal that gas-rich magma is ascending, crystallizing, or alternatively stalling, with important implications for volcanic hazard (for example, Sutton and others, 1992; Aiuppa and others, 2007, 2021; Werner and others, 2009, 2011, 2012; Moretti and others, 2013; de Moor and others, 2016; Lewicki and others, 2019; Edmonds and others, 2022; Kern and others, 2022; Kunrat and others, 2022). Most volcanoes in Alaska and the western United States are characterized by weak degassing, with one or more low-temperature fumaroles (typically near the local boiling temperature of water) and connect to a deeper and sometimes extensive hydrothermal system (for example, McGee and others, 2001; Symonds and others, 2003a, b). Hydrothermal systems will affect the chemistry of rising gases exsolved from deeper magma (Symonds and others, 2001), including sulfur dioxide (SO 2 ), hydrogen chloride (HCl), and water vapor (for example, Doukas and Gerlach, 1995; Gerlach and others, 1998, 2008; Symonds and others, 2001; Werner and others, 2013). As an example, depending on factors such as temperature, pressure, and oxidation state, rising SO 2 will react with groundwater to form hydrogen sulfide (H 2 S) gas, dissolved sulfate (SO 4 2− ), or elemental sulfur (Christenson, 2000; Symonds and others, 2001; Werner and others, 2008). The reaction and dissolution of SO 2 into shallow groundwater is commonly referred to as scrubbing, and can reduce the likelihood that ascending, degassing magma can be detected. Carbon dioxide, however, in addition to exsolving from magma early in the ascent process, is not easily removed by hydrothermal fluids (Lowenstern, 2001). As scrubbing and other processes take place, the SO 2 /H 2 S, CO 2 /SO 2 , and CO 2 /H 2 S ratios may change. High rates of SO 2 emission indicate that magma has moved to relatively shallow levels in the volcano and that the system has heated up enough to establish dry pathways from depth to the surface. Monitoring multiple gas species and the total output of those species is thereby useful for volcano monitoring during both periods of quiescence, to establish background degassing conditions, and during unrest, when gas geochemistry and emission rates can provide information on changing conditions, such as magma ascent. To provide context for multidisciplinary volcano forecasts, we focus on the following two key required capabilities: (1) characterizing baseline geochemistry and gas discharge from volcanoes and volcanic regions and (2) monitoring changes in gas geochemistry and discharge to inform forecasts of volcanic eruptions and their effects. Sufficient baseline data must be collected to identify and interpret anomalous degassing associated with volcanic unrest (for example, Sorey and others, 1998; Rouwet and others, 2014). Differences in volcano type, baseline degassing rates, local hydrology, and geography (for example, high versus low latitude) will result in a different baseline for each volcano. Volcanoes of any threat level that exhibit one or more degassing phenomena would ideally be monitored by techniques needed to establish baseline degassing data, with the sampling frequency of baseline data dictated by the threat level (table E1). Additional monitoring techniques become necessary during periods of unrest. In general, three of the most important techniques for gas monitoring are (1) direct sampling of fumarole, spring, and soil gases for laboratory geochemical measurements, (2) measurements of the chemical composition of the volcanic plume and emission rates of major gas species (for example, H 2 O, CO 2 , SO 2 , and H 2 S) by satellite, airborne, or ground-based techniques, and (3) measurements of diffuse emissions of CO 2 and other gases through soils. Various methods and instruments may be useful both for baseline studies and during unrest.

Scientific Investigations Report↗
USGS2024

Assessment of the interconnection between Tampa Bay and the Floridan aquifer system: Historical groundwater data compilation and analysis, 1976–2022

The U.S. Geological Survey used existing data collected after the last major navigational channel modification in the mid-1980s to investigate groundwater levels and chloride concentrations in wells in the Floridan aquifer system and other aquifers beneath and near Tampa Bay. Tampa Bay is located on the west-central coast of Florida and provides access for commercial shipping. In 2021, the U.S. Army Corps of Engineers began to investigate alternatives to improve the efficiency of the deep-draft navigation channels within Tampa Bay, reduce costs, improve safety, and analyze the implications of modifying navigational channels. The Floridan aquifer system underlies Tampa Bay and is the primary source of public water supply in the region. Modifications to the channels have the potential to expose the Floridan aquifer system to the saltwater in Tampa Bay, with the potential to increase salinity in wells in the region. Other factors affecting the groundwater levels and the location of the freshwater/saltwater interface were also examined, including changes in sea level, groundwater extraction, and variations in climate. Groundwater levels and well-construction reports were used to identify whether different aquifer units are well-connected. Twelve wells had available data before and after the last major channel modifications, which took place in the 1980s, with six datasets of chloride concentration available in areas along the northern and eastern coastline of Tampa Bay, which is nearest to historical dredging activities. Of these six, Kendall’s τ and p -values indicated increasing trends in chloride concentration for three datasets (TR 11-2, TR 10-2, 51), no trend in chloride concentration for two datasets (TR 9-3, 50), and a decreasing trend in chloride concentration for one dataset (TR 9-1). The upward trends in chloride concentration observed for TR 10-2 and 51 are likely the result of changes in local groundwater withdrawals. Well TR 11-2 had a gradual increasing trend in chloride concentration, fresh groundwater throughout the period of record, and a 3- to 4-foot increase in hydraulic head during the period of record, possibly caused by the construction and control of the Tampa Bypass Canal, resulting in changes to the regional potentiometric surface.

Florida↗