USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geological Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources

Petrology, mineralogy and geochemistry of mined coals, western Venezuela

Upper Paleocene to middle Miocene coal samples collected from active mines in the western Venezuelan States of Táchira, Mérida and Zulia have been characterized through an integrated geochemical, mineralogical and petrographic investigation. Proximate, ultimate, calorific and forms of sulfur values, major and trace element, vitrinite reflectance, maceral concentrations and mineral matter content have been determined for 16 channel samples from 14 mines. Ash yield generally is low, ranging from < 1 to 17 wt.% (mean = 5 wt.%) on a dry basis (db). Total sulfur content is low to moderate, ranging from 1 to 6 wt.%, db (average = 1.7 wt.%). Calorific value ranges from 25.21 to 37.21 MJ/kg (10,840–16,000 Btu/lb) on a moist, mineral-matter-free basis (average = 33.25 MJ/kg, 14,300 Btu/lb), placing most of the coal samples in the apparent rank classification of high-volatile bituminous. Most of the coal samples exhibit favorable characteristics on the various indices developed to predict combustion and coking behavior and concentrations of possible environmentally sensitive elements (As, Be, Cd, Cr, Co, Hg, Mn, Ni, Pb, Sb, Se, Th and U) generally are similar to the concentrations of these elements in most coals of the world, with one or two exceptions. Concentrations of the liptinite maceral group range from < 1% to 70 vol.%. Five samples contain > 20 vol.% liptinite, dominated by the macerals bituminite and sporinite. Collotelinite dominates the vitrinite group; telinite was observed in quantities of ≤ 1 vol.% despite efforts to better quantify this maceral by etching the sample pellets in potassium permanganate and also by exposure in an oxygen plasma chamber. Inertinite group macerals typically represent < 10 vol.% of the coal samples and the highest concentrations of inertinite macerals are found in distantly spaced (> 400 km) upper Paleocene coal samples from opposite sides of Lago de Maracaibo, possibly indicating tectonic controls on subsidence related to construction of the Andean orogen. Values of maximum reflectance of vitrinite in oil ( R o max ) range between 0.42% and 0.85% and generally are consistent with the high-volatile bituminous rank classification obtained through ASTM methods. X-ray diffraction analyses of low-temperature ash residues indicate that kaolinite, quartz, illite and pyrite dominate the inorganic fraction of most samples; plagioclase, potassium feldspar, calcite, siderite, ankerite, marcasite, rutile, anatase and apatite are present in minor or trace concentrations. Semiquantitative values of volume percent pyrite content show a strong correlation with pyritic sulfur and some sulfide-hosted trace element concentrations (As and Hg). This work provides a modern quality dataset for the western Venezuela coal deposits currently being exploited and will serve as the foundation for an ongoing coal quality research program in Venezuela.

International Journal of Coal Geology↗

Fluorescence spectroscopy of ancient sedimentary organic matter via confocal laser scanning microscopy (CLSM)

Fluorescence spectroscopy via confocal laser scanning microscopy (CLSM) was used to analyze ancient sedimentary organic matter, including Tasmanites microfossils in Devonian shale and Gloecapsomorpha prisca ( G. prisca ) in Ordovician kukersite from North American basins. We examined fluorescence emission as a function of excitation laser wavelength, sample orientation, and with respect to location within individual organic entities and in transects across bedded organic matter. Results from spectral scans of the same field of view in Tasmanites with different laser lines showed progressive red-shift in emission maxima with longer excitation wavelengths. This result indicates steady-state Tasmanites fluorescence emission is an overlapping combination of emission from multiple fluorophore functions. Stokes shift decreased with increasing excitation wavelength, further suggesting the presence of multiple fluorophore functions with different S 1 → S 0 transition energies. This observation also indicates that at longer excitation wavelengths, less absorbed light energy is dissipated via collisional transfer than at shorter excitation wavelengths and may suggest fewer polar functions are preferentially absorbing. Confirming earlier results, emission spectra observed from high fluorescence intensity regions (fold apices) in individual Tasmanites are blue-shifted relative to emission from other locations in the same microfossil. We suggest high intensity emission is from photoselective alignment of polarized excitation with the fluorophore absorption and emission transition moment. The blue shift observed in regions of high intensity emission may be due to relative absence or realignment of polar species, e.g., bridging ether or ester functions, although variations in O abundance could not be confirmed with preliminary time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis. Tasmanites occurring in consolidated sediments are flattened from original spherical morphology and, in optical microscopy, this burial deformation results in generally parallel extinction (strain-influenced) and positive elongation. The deformation also induces fluorescence anisotropy observed as variations in emission wavelength when individual Tasmanites are measured from their long axis parallel to bedding, whereas this effect is absent in bedding-normal view. Transects from G. prisca -rich source layers into adjacent reservoir layers show decrease in fluorescence intensity and spectral red-shift (increase in full-width half-maximum with increasing red portion of the half-width). These results may suggest an increase in fluorescence quenching across the source-to-reservoir transition zone, consistent with an increase in aromaticity following petroleum expulsion and migration. These observations are supported by increasing reflectance values measured across similar micro-scale transects. Our results highlight the applicability of CLSM as a broad and under-utilized approach for the characterization of sedimentary organic matter and are discussed with perspective toward petroleum processes and thermal indices research.

International Journal of Coal Geology↗

A Holocene paleosecular variation from 14C-dated volcanic rocks in western North America

A paleosecular variation (PSV) curve for western North America is presented on the basis of 94 virtual geomagnetic poles (VGPs) from dated volcanic rocks sampled at 446 sites. Approximately 60% of the paleomagnetic database has been previously published. A curve defined by “spherical smoothed splines” is fitted to the VGPs, ranked by the quality of the age determinations, where the data density is highest between 3690 and −30 years before present (B.P.) (A.D. 1950), between 7800 and 7050 years B.P., and between 14,060 and 12,700 years B.P. The younger segments of the curve derived from volcanic rocks are similar but less complex than other high-resolution PSV curves derived from lacustrine sediments, particularly the record at Fish Lake, Oregon. The PSV record from lava flows (PSVL), however, is perhaps more reliable in its general shape and chronology because of the higher fidelity of volcanic rocks as magnetic field recorders and because of the greater density of 14 C dates. The new PSVL record provides a partial Holocene master curve for western North America and will be of particular value in dating geological and archeological materials using paleomagnetic directions.

Arizona, California, Colorado, Idaho, New Mexico, ↗

Factors controlling storm impacts on coastal barriers and beaches - A preliminary basis for near real-time forecasting

Analysis of ground conditions and meteorological and oceanographic parameters for some of the most severe Atlantic and Gulf Coast storms in the U.S. reveals the primary factors affecting morphological storm responses of beaches and barrier islands. The principal controlling factors are storm characteristics, geographic position relative to storm path, timing of storm events, duration of wave exposure, wind stress, degree of flow confinement, antecedent topography and geologic framework, sediment textures, vegetative cover, and type and density of coastal development. A classification of commonly observed storm responses demonstrates the sequential interrelations among (1) land elevations, (2) water elevations in the ocean and adjacent lagoon (if present), and (3) stages of rising water during the storm. The predictable coastal responses, in relative order from high frequency beach erosion to low frequency barrier inundation, include: beach erosion, berm migration, dune erosion, washover terrace construction, perched fan deposition, sheetwash, washover channel incision, washout formation, and forced and unforced ebb flow. Near real-time forecasting of expected storm impacts is possible if the following information is available for the coast: a detailed morphological and topographic characterization, accurate storm-surge and wave-runup models, the real-time reporting of storm parameters, accurate forecasts of the storm position relative to a particular coastal segment, and a conceptual model of geological processes that encompasses observed morphological changes caused by extreme storms.

Journal of Coastal Research↗

Tomographic Rayleigh-wave group velocities in the Central Valley, California centered on the Sacramento/San Joaquin Delta

If shaking from a local or regional earthquake in the San Francisco Bay region were to rupture levees in the Sacramento/San Joaquin Delta then brackish water from San Francisco Bay would contaminate the water in the Delta: the source of fresh water for about half of California. As a prelude to a full shear-wave velocity model that can be used in computer simulations and further seismic hazard analysis, we report on the use of ambient noise tomography to build a fundamental-mode, Rayleigh-wave group velocity model for the region around the Sacramento/San Joaquin Delta in the western Central Valley, California. Recordings from the vertical component of about 31 stations were processed to compute the spatial distribution of Rayleigh wave group velocities. Complex coherency between pairs of stations were stacked over 8 months to more than a year. Dispersion curves were determined from 4 to about 18 seconds. We calculated average group velocities for each period and inverted for deviations from the average for a matrix of cells that covered the study area. Smoothing using the first difference is applied. Cells of the model were about 5.6 km in either dimension. Checkerboard tests of resolution, which is dependent on station density, suggest that the resolving ability of the array is reasonably good within the middle of the array with resolution between 0.2 and 0.4 degrees. Overall, low velocities in the middle of each image reflect the deeper sedimentary syncline in the Central Valley. In detail, the model shows several centers of low velocity that may be associated with gross geologic features such as faulting along the western margin of the Central Valley, oil and gas reservoirs, and large cross cutting features like the Stockton arch. At shorter periods around 5.5s, the model’s western boundary between low and high velocities closely follows regional fault geometry and the edge of a residual isostatic gravity low. In the eastern part of the valley, the boundaries of the low velocity zone and gravity anomaly are better aligned at longer periods (around 10.5s) suggesting that the eastern edge of the gravity low is associated with deeper structure. There is a strong correspondence between a low in gravity near the Kirby Hills fault and low velocities from the ambient noise tomography. At longer periods, higher velocities creep in from the east and narrow the overall dimension defined by the lower velocities. Overall, there is a strong correspondence between the shape and location of low velocities in the Rayleigh wave velocity images, and geological and geophysical features.

California↗

#TheSmoreYouKnow and #emergencycute: A conceptual model on the use of humor by science agencies during crisis to create connection, empathy, and compassion

Studies from a variety of disciplines reveal that humor can be a useful method to reduce stress and increase compassion, connection, and empathy between agencies and people they serve during times of crisis. Despite this growing evidence base, humor's use during a geohazard (earthquake, volcanoes , landslides, and tsunami) to aid scientific agencies' crisis communication response has been rarely studied. A broad literature review of humor in crisis and an exploratory examination of several case studies reveal that scientific organizations, specifically those that respond to geohazards, can harness the power of humor to help create connection and empathy with the publics they seek to serve. We find evidence that supports our argument that the use of humor acknowledges a shared human experience, reducing the barriers between public officials, scientists, and the people most impacted by crisis. Public statements made by scientists and public officials during the U.S. Geological Survey (USGS) response to the Kīlauea eruption in 2018 in Hawai'i, United States, and GNS Science/GeoNet (GeoNet) response to the M7.8 Kaikōura/North Hurunui earthquake in 2016 in Aotearoa New Zealand, are used to inform the development of this conceptual model. We then posit a conceptual model which unifies concepts from the literature with our case studies to provide potential guidelines for those crisis communicators working for science agencies on how best to use humor to help people cope during times of crisis. This model can be further tested for future research to determine its effectiveness and utility for scientific agencies responding to geological crises.

International Journal of Disaster Risk Reduction↗

Mapping Curie temperature depth in the western United States with a fractal model for crustal magnetization

We have revisited the problem of mapping depth to the Curie temperature isotherm from magnetic anomalies in an attempt to provide a measure of crustal temperatures in the western United States. Such methods are based on the estimation of the depth to the bottom of magnetic sources, which is assumed to correspond to the temperature at which rocks lose their spontaneous magnetization. In this study, we test and apply a method based on the spectral analysis of magnetic anomalies. Early spectral analysis methods assumed that crustal magnetization is a completely uncorrelated function of position. Our method incorporates a more realistic representation where magnetization has a fractal distribution defined by three independent parameters: the depths to the top and bottom of magnetic sources and a fractal parameter related to the geology. The predictions of this model are compatible with radial power spectra obtained from aeromagnetic data in the western United States. Model parameters are mapped by estimating their value within a sliding window swept over the study area. The method works well on synthetic data sets when one of the three parameters is specified in advance. The application of this method to western United States magnetic compilations, assuming a constant fractal parameter, allowed us to detect robust long-wavelength variations in the depth to the bottom of magnetic sources. Depending on the geologic and geophysical context, these features may result from variations in depth to the Curie temperature isotherm, depth to the mantle, depth to the base of volcanic rocks, or geologic settings that affect the value of the fractal parameter. Depth to the bottom of magnetic sources shows several features correlated with prominent heat flow anomalies. It also shows some features absent in the map of heat flow. Independent geophysical and geologic data sets are examined to determine their origin, thereby providing new insights on the thermal and geologic crustal structure of the western United States.

Journal of Geophysical Research B: Solid Earth↗

Venus cartography

The entire surface of the planet Venus is being mapped at global and regional scales (1:50,000,000 through 1:1,500,000) with synthetic aperture radar (SAR), radar altimeter, and radiometer measurements of physical properties from the Magellan spacecraft. The mapping includes SAR image mosaics, shaded relief maps, and topographic contour overlays made from altimetry data and by radargrammetric methods. Methods used include new techniques of radar image processing that became operational as a result of the Magellan mission. The area being mapped (at a resolution of 75 m/pixel) is roughly equivalent to that of Earth, including seafloors. The mapping is designed to support geologic and geophysical investigations.

Journal of Geophysical Research E: Planets↗

Historical shoreline mapping (I): improving techniques and reducing positioning errors

A critical need exists among coastal researchers and policy-makers for a precise method to obtain shoreline positions from historical maps and aerial photographs. A number of methods that vary widely in approach and accuracy have been developed to meet this need. None of the existing methods, however, address the entire range of cartographic and photogrammetric techniques required for accurate coastal mapping. Thus, their application to many typical shoreline mapping problems is limited. In addition, no shoreline mapping technique provides an adequate basis for quantifying the many errors inherent in shoreline mapping using maps and air photos. As a result, current assessments of errors in air photo mapping techniques generally (and falsely) assume that errors in shoreline positions are represented by the sum of a series of worst-case assumptions about digitizer operator resolution and ground control accuracy. These assessments also ignore altogether other errors that commonly approach ground distances of 10 m. This paper provides a conceptual and analytical framework for improved methods of extracting geographic data from maps and aerial photographs. We also present a new approach to shoreline mapping using air photos that revises and extends a number of photogrammetric techniques. These techniques include (1) developing spatially and temporally overlapping control networks for large groups of photos; (2) digitizing air photos for use in shoreline mapping; (3) preprocessing digitized photos to remove lens distortion and film deformation effects; (4) simultaneous aerotriangulation of large groups of spatially and temporally overlapping photos; and (5) using a single-ray intersection technique to determine geographic shoreline coordinates and express the horizontal and vertical error associated with a given digitized shoreline. As long as historical maps and air photos are used in studies of shoreline change, there will be a considerable amount of error (on the order of several meters) present in shoreline position and rate-of- change calculations. The techniques presented in this paper, however, provide a means to reduce and quantify these errors so that realistic assessments of the technological noise (as opposed to geological noise) in geographic shoreline positions can be made.

Journal of Coastal Research↗

Foreword: function, classification and management of Asian wetlands

Asian wetland conservation is critical for future environmental protection in the region, but these wetlands are understudied. In particular, there is a lack of research studies published in English due to the limited access of Asian researchers to western scientific journals. This special feature of Wetlands showcases primary research conducted in Asian wetlands and was sponsored by various agencies of the U.S. and Chinese governments including the U.S. Geological Survey, U.S. Department of State, and The State Forestry Administration of the People’s Republic of China. The featured articles should be of great value to wetland scientists, managers and policy-makers with an interest in the conservation of Asian wetlands.

Wetlands↗

Annotated bibliography on artificial recharge of ground water, 1955-67

Artificial ground-water recharge has become more important as water use by agriculture, industry, and municipalities increases. Water management agencies are increasingly interested in potential use of recharge for pollution abatement, waste-water disposal, and re-use and reclamation of locally available supplies. Research projects and theoretical analyses of operational recharge systems show increased scientific emphasis on the practice. Overall ground-water basin management systems generally now contain considerations of artificial recharge, whether by direct or indirect methods. Artificial ground-water recharge is a means of conserving surface runoff for future use in places where it would otherwise be lost, of protecting ground-water basins from salt-water encroachment along coastal areas, and of storing and distributing imported water. The biblio-graphy emphasizes technology; however, annotations of articles on waste-water reclamation, ground-water management and ground-water basin management are included. Subjects closely related to artificial recharge, including colloidal flow through porous media, field or laboratory instrumentation, and waste disposal by deep well injection are included where they specifically relate to potential recharge problems. Where almost the same material has been published in several journals, all references are included on the assumption that some publications may be more readily available to interested persons than others. Other publications, especially those of foreign literature, provided abstracts that were used freely as time limitations precluded obtaining and annotating all materials. Abstracts taken from published sources are noted. These are: "Abstracts of North American Geology," U.S. Department of the Interior, Geological Survey; "Abstracts of Recent Published Material on Foil and Water Conservation," ARS-41 series, Agricultural F.esearch Service, U.S. Department of Agriculture; "Water and1 Water Engineering," published by Fuel and Metallurgical Journals, Ltd., London, England; "Journal of Geophysical Research," American Geophysical Union, Washington, D.C.; "American Society of Civil Engineers Transactions," New York; "Selected Bibliography of Hydrology, United Kingdom, for the Years 1955-59," International Association of Scientific Hydrology; "Water Wells, an Annotated Bibliography," California University Water Resources Center Archives Report 13; "Re-use of Effluent in the Future With an Annotated Bibliography," by G. A. Whetstone, Texas Water Development Board Report 8, Austin, Tex.; "Journal of Water Pollution Control Federation," Washington, D.C.; and "A List of Selected Technical References on Artificial Recharge of Ground-Water Reservoirs," compiled by Roy W. Graves, Tulsa University, Information Services Department, Tulsa, Okla. Other notations are self-explanatory, and initials are those of the authors (DCS, DJG, WK). An unpublished compilation of recharge references by Arnon Arad sponsored by the United Nations Educational, Scientific, and Cultural Organization during a training period with the U.S. Geological Survey was also used. The bibliography is arranged alphabetically by author. Where an author has more than one publication, the arrangement is chronological; where an author has more than one publication in a given year, a, b, c, . . . are added. The indexing is by subject and geographic location. Each article was assigned the key words or phrases to best characterize its contents. Units of measure are as they were in the original article; abbreviations retained are generally those in common use such as mg/1 (milligrams per liter), ppm (parts per million), gpm (gallons per minute), km (kilometers), m (meters), cu m per hr (cubic meters p^r hour), cfs (cubic feet per second), me/1 (milliequivalents per liter), psi (pounds per square inch), BOD (biochemical oxygen demand), sq m (square meters), gpd (gallons per day), and mgd (million gallons per day). The bibliography was prepared because of the worldwide interest in the field of artificial recharge and the need for a single source of references to the literature published since 1954. The work is a sequel to the "Annotated Bibliography on Artificial Recharge of Ground Water Through 1954," by D. K. Todd, U.S. Geological Survey Water-Supply Paper 1477, published in 1959.

Water Supply Paper↗

Editors' message: Hydrogeology Journal in 2003

Hydrogeology Journal appeared in six issues containing a total of 710 pages and 48 major articles, including 31 Papers and 14 Reports, as well as some Technical Notes and Book Reviews. The number of submitted manuscripts continues to increase. The final issue of 2003 also contained the annual volume index. Hydrogeology Journal ( HJ ) is an international forum for hydrogeology and related disciplines and authors in 2003 were from about 28 countries. Articles advanced hydrogeologic science and described hydrogeologic systems in many regions worldwide. These articles focused on a variety of general topics and on studies of hydrogeology in 24 countries: Afghanistan, Algeria, Argentina, Australia, Bangladesh, Belgium, Canada, Chile, China, Denmark, France, India, Italy, Mexico, Netherlands, New Zealand, Nigeria, Norway, Portugal, Russia, South Africa, Switzerland, Turkey, and U.S.A. The Guest Editor of the 2003 HJ theme issue on “Hydromechanics in Geology and Geotechnics”, Ove Stephansson, assembled a valuable collection of technical reviews and research papers from eminent authors on important aspects of the subject area.

Hydrogeology Journal↗

Using geologic structures to constrain constitutive laws not accessible in the laboratory

In this essay, we explore a central problem of structural geology today, and in the foreseeable future, which is the determination of constitutive laws governing rock deformation to produce geologic structures. Although laboratory experiments provide much needed data and insights about constitutive laws, these experiments cannot cover the range of conditions and compositions relevant to the formation of geologic structures. We advocate that structural geologists address this limitation by interpreting natural experiments, documented with field and microstructural data, using continuum mechanical models that enable the deduction of constitutive laws. To put this procedure into a historical context, we review the founding of structural geology by James Hutton in the late 18th century, and the seminal contributions to continuum mechanics from Newton to Cauchy that provide the tools to model geologic structures. The procedure is illustrated with two examples drawn from recent and on-going field investigations of crustal and mantle lithologies . We conclude by pointing to future research opportunities that will engage structural geologists in the pursuit of constitutive laws during the 21st century.

Journal of Structural Geology↗

Unusual ice diamicts emplaced during the December 15, 1989 eruption of Redoubt volcano, Alaska

Ice diamict comprising clasts of glacier ice and subordinate rock debris in a matrix of ice (snow) grains, coarse ash, and frozen pore water was deposited during the eruption of Redoubt Volcano on December 15, 1989. Rounded clasts of glacier ice and snowpack are as large as 2.5 m, clasts of Redoubt andesite and basement crystalline rocks reach 1 m, and tabular clasts of entrained snowpack are as long as 10 m. Ice diamict was deposited on both the north and south volcano flanks. On Redoubt's north flank along the east side of Drift piedmont glacier and outwash valley, ice diamict accumulated as at least 3 units, each 1–5 m thick. Two ice-diamict layers underlie a pumice-lithic fall tephra that accumulated on December 15 from 10:15 to 11:45 AST. A third ice diamict overlies the pumiceous tephra. Some of the ice diamicts have a basal ‘ice-sandstone’ layer. The north side icy flows reached as far as 14 km laterally over an altitude drop of 2.3 km and covered an area of about 5.7 km 2 . On Crescent Glacier on the south volcano flank, a composite ice diamict is locally as thick as 20 m. It travelled 4.3 km over an altitude drop of 1.7 km, covering about 1 km 2 . The much higher mobility of the northside flows was influenced by their much higher water contents than the southside flow(s). Erupting hot juvenile andesite triggered and turbulently mixed with snow avalanches at snow-covered glacier heads. These flows rapidly entrained more snow, firn, and ice blocks from the crevassed glacier. On the north flank, a trailing watery phase of each ice-diamict flow swept over and terraced the new icy deposits. The last (and perhaps each) flood reworked valley-floor snowpack and swept 35 km downvalley to the sea. Ice diamict did not form during eruptions after December 15 despite intervening snowfalls. These later pyroclastic flows swept mainly over glacier ice rather than snowpack and generated laharic floods rather than snowflows. Similar flows of mixed ice grains and pyroclastic debris resulted from the November 13, 1985 eruption of Nevado del Ruiz volcano and from eruptions of snowclad Mount St. Helens in 1982–1984. Such deposits at snowclad volcanoes are initially broad and geomorphically distinct, but they soon become extensively reworked and hard to recognize in the geologic record.

Alaska↗

Web-based flood database for Colorado, water years 1867 through 2011

In order to provide a centralized repository of flood information for the State of Colorado, the U.S. Geological Survey, in cooperation with the Colorado Department of Transportation, created a Web-based geodatabase for flood information from water years 1867 through 2011 and data for paleofloods occurring in the past 5,000 to 10,000 years. The geodatabase was created using the Environmental Systems Research Institute ArcGIS JavaScript Application Programing Interface 3.2. The database can be accessed at http://cwscpublic2.cr.usgs.gov/projects/coflood/COFloodMap.html. Data on 6,767 flood events at 1,597 individual sites throughout Colorado were compiled to generate the flood database. The data sources of flood information are indirect discharge measurements that were stored in U.S. Geological Survey offices (water years 1867–2011), flood data from indirect discharge measurements referenced in U.S. Geological Survey reports (water years 1884–2011), paleoflood studies from six peer-reviewed journal articles (data on events occurring in the past 5,000 to 10,000 years), and the U.S. Geological Survey National Water Information System peak-discharge database (water years 1883–2010). A number of tests were performed on the flood database to ensure the quality of the data. The Web interface was programmed using the Environmental Systems Research Institute ArcGIS JavaScript Application Programing Interface 3.2, which allows for display, query, georeference, and export of the data in the flood database. The data fields in the flood database used to search and filter the database include hydrologic unit code, U.S. Geological Survey station number, site name, county, drainage area, elevation, data source, date of flood, peak discharge, and field method used to determine discharge. Additional data fields can be viewed and exported, but the data fields described above are the only ones that can be used for queries.

Colorado↗

Annotated bibliography of scientific research on pygmy rabbits published from 1990 to 2020

Integrating recent scientific knowledge into management decisions supports effective natural resource management and can lead to better resource outcomes. However, finding and accessing scientific knowledge can be time consuming and costly. To assist in this process, the U.S. Geological Survey (USGS) is creating a series of annotated bibliographies on topics of management concern for western lands. Previously published reports introduced a methodology for preparing annotated bibliographies to facilitate the integration of recent, peer-reviewed science into resource management decisions. Therefore, relevant text from those efforts is reproduced here to frame the presentation. Sagebrush ecosystems throughout North America face management challenges including habitat loss and fragmentation. Brachylagus idahoensis (pygmy rabbits) are a sagebrush-obligate species that has experienced population declines and range contraction in recent decades. A disjunct population of pygmy rabbits in the Columbia Basin in Washington was listed as federally endangered in 2003. Due to their specialized habitat requirements and low dispersal ability, pygmy rabbits are a high priority for managers throughout their range. We compiled and summarized peer-reviewed journal articles, data products, and formal technical reports (such as U.S. Forest Service General Technical Reports and U.S. Geological Survey Open-File Reports) on pygmy rabbits published between January 1, 1990 and December 31, 2020. We first conducted a structured search of three reference databases and three government databases using the phrase “pygmy rabbit” or “ Brachylagus idahoensis .” We refined the initial list of products by removing (1) duplicates, (2) products not written in English, (3) publications that were not focused on North America, (4) publications that were not published as research, data products, or scientific review articles in peer-reviewed journals or as formal technical reports, and (5) products for which pygmy rabbits were not a research focus or for which the study did not present new data or findings about pygmy rabbits. We summarized each product using a consistent structure (background, objectives, methods, location, findings, and implications) and identified the management topics (for example, captive breeding, habitat characteristics, and population estimates) addressed by each product. We also noted which publications included new publicly available geospatial data. The review process for this annotated bibliography included an initial internal colleague review of each summary, requesting input on each summary from an author of the original publication, and a formal peer review. Our initial searches resulted in 2,285 total products, of which 105 met our criteria for inclusion. Sensitive/rare wildlife, behavior or demographics, site-scale habitat characteristics, habitat selection, and effects distances or spatial scale were the management topics most commonly addressed. The online version of this bibliography, Science for Resource Managers, will be searchable by topic, location, and year; it will include links to each original publication, where available. The studies compiled and summarized here may inform planning and management actions that seek to maintain and restore sagebrush landscapes and associated native species across the western United States.

Open-File Report↗

Implications of a magnetic model of the Long Valley caldera, California

A quantitative magnetic model of Long Valley, California, shows that the magnetic field above this caldera is dominated by intracaldera Bishop tuff, part of the ash flow tuff whose eruption precipitated the caldera collapse. We propose that about half of the 350 km 3 of intracaldera Bishop tuff, or that part beneath the resurgent dome, has been subjected to extensive hydrothermal alteration. The heat that produced this alteration is apparently associated with the residual magma chamber, and much of the formation may still be hot (>200°C). The magnetic minerals in the remaining intracaldera Bishop tuff have not been drastically altered, presumably because the tuff was not heated sufficiently. As a result, the tuff may not be very hot today. The model also reveals the existence of parts of two large precaldera mountains beneath the caldera fill. The resolving power attained in this investigation was possible because we were dealing with large, magnetically distinct lithologic units and a large amount of geological and geophysical data were available constraints to produce the solution.

California↗

Review and update of the applications of organic petrology: Part 2, geological and multidisciplinary applications

The present paper is focused on organic petrology applied to unconventional and multidisciplinary investigations and is the second part of a two part review that describes the geological applications and uses of this branch of earth sciences. Therefore, this paper reviews the use of organic petrology in investigations of: (i) ore genesis when organic matter occurs associated with mineralization; (ii) the behavior of organic matter in coal fires (self-heating and self-combustion); (iii) environmental and anthropogenic impacts associated with the management and industrial utilization of coal; (iv) archeology and the nature and geographical provenance of objects of organic nature such as jet, amber, other artifacts and coal from archeological sites; and (v) forensic science connected with criminal behavior or disasters. This second part of the review outlines the most recent research and applications of organic petrology in those fields.

International Journal of Coal Geology↗