USGS Science⌕ Search

SEARCH · USGS Science

Results for “Basic Data Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources

Aquatic habitat mapping with an acoustic doppler current profiler: Considerations for data quality

When mounted on a boat or other moving platform, acoustic Doppler current profilers (ADCPs) can be used to map a wide range of ecologically significant phenomena, including measures of fluid shear, turbulence, vorticity, and near-bed sediment transport. However, the instrument movement necessary for mapping applications can generate significant errors, many of which have not been inadequately described. This report focuses on the mechanisms by which moving-platform errors are generated, and quantifies their magnitudes under typical habitat-mapping conditions. The potential for velocity errors caused by mis-alignment of the instrument?s internal compass are widely recognized, but has not previously been quantified for moving instruments. Numerical analyses show that even relatively minor compass mis-alignments can produce significant velocity errors, depending on the ratio of absolute instrument velocity to the target velocity and on the relative directions of instrument and target motion. A maximum absolute instrument velocity of about 1 m/s is recommended for most mapping applications. Lower velocities are appropriate when making bed velocity measurements, an emerging application that makes use of ADCP bottom-tracking to measure the velocity of sediment particles at the bed. The mechanisms by which heterogeneities in the flow velocity field generate horizontal velocities errors are also quantified, and some basic limitations in the effectiveness of standard error-detection criteria for identifying these errors are described. Bed velocity measurements may be particularly vulnerable to errors caused by spatial variability in the sediment transport field.

Open-File Report↗

Leveraging geodetic data to reduce losses from earthquakes

Seismic hazard assessments that are based on a variety of data and the best available science, coupled with rapid synthesis of real-time information from continuous monitoring networks to guide post-earthquake response, form a solid foundation for effective earthquake loss reduction. With this in mind, the Earthquake Hazards Program (EHP) of the U.S. Geological Survey (USGS) Natural Hazards Mission Area (NHMA) engages in a variety of undertakings, both established and emergent, in order to provide high quality products that enable stakeholders to take action in advance of and in response to earthquakes. Examples include the National Seismic Hazard Model (NSHM), development of tools for improved situational awareness such as earthquake early warning (EEW) and operational earthquake forecasting (OEF), research about induced seismicity, and new efforts to advance comprehensive subduction zone science and monitoring. Geodetic observations provide unique and complementary information directly relevant to advancing many aspects of these efforts (fig. 1). EHP scientists have long leveraged geodetic data for a range of influential studies, and they continue to develop innovative observation and analysis methods that push the boundaries of the field of geodesy as applied to natural hazards research. Given the ongoing, rapid improvement in availability, variety, and precision of geodetic measurements, considering ways to fully utilize this observational resource for earthquake loss reduction is timely and essential. This report presents strategies, and the underlying scientific rationale, by which the EHP could achieve the following outcomes: The EHP is an authoritative source for the interpretation of geodetic data and its use for earthquake loss reduction throughout the United States and its territories. The USGS consistently provides timely, high quality geodetic data to stakeholders. Significant earthquakes are better characterized by incorporating geodetic data into USGS event response products and by expanded use of geodetic imaging data to assess fault rupture and source parameters. Uncertainties in the NSHM, and in regional earthquake models, are reduced by fully incorporating geodetic data into earthquake probability calculations. Geodetic networks and data are integrated into the operations and earthquake information products of the Advanced National Seismic System (ANSS). Earthquake early warnings are improved by more rapidly assessing ground displacement and the dynamic faulting process for the largest earthquakes using real-time geodetic data. Methodology for probabilistic earthquake forecasting is refined by including geodetic data when calculating evolving moment release during aftershock sequences and by better understanding the implications of transient deformation for earthquake likelihood. A geodesy program that encompasses a balanced mix of activities to sustain missioncritical capabilities, grows new competencies through the continuum of fundamental to applied research, and ensures sufficient resources for these endeavors provides a foundation by which the EHP can be a leader in the application of geodesy to earthquake science. With this in mind the following objectives provide a framework to guide EHP efforts: Fully utilize geodetic information to improve key products, such as the NSHM and EEW, and to address new ventures like the USGS Subduction Zone Science Plan. Expand the variety, accuracy, and timeliness of post-earthquake information products, such as PAGER (Prompt Assessment of Global Earthquakes for Response), through incorporation of geodetic observations. Determine if geodetic measurements of transient deformation can significantly improve estimates of earthquake probability. Maintain an observational strategy aligned with the target outcomes of this document that includes continuous monitoring, recording of ephemeral observations, focused data collection for use in research, and application-driven data processing and analysis systems. Collaborate on research, development, and operation of affordable, high-precision seafloor geodetic methods that improve earthquake forecasting and event response. Advance computational techniques and instrumentation to enable use of strategies like repeat-pass imagery and low-cost geodetic sensors for earthquake response, monitoring, and research. Engage stakeholders and collaborate with partner institutions to foster operational and research objectives and to safeguard the continued health of geodetic infrastructure upon which we mutually depend. Maintaining a vibrant internal research program provides the foundation by which the EHP can remain an effective and trusted source for earthquake science. Exploiting abundant new data sources, evaluating and assimilating the latest science, and pursuing novel avenues of investigation are means to fulfilling the EHP’s core responsibilities and realizing the important scientific advances envisioned by its scientists. Central to the success of such a research program is engaging personnel with a breadth of competencies and a willingness and ability to adapt these to the program’s evolving priorities, enabling current staff to expand their skills and responsibilities, and planning holistically to meet shared workforce needs. In parallel, collaboration with external partners to support scientific investigations that complement ongoing internal research enables the EHP to strengthen earthquake information products by incorporating alternative perspectives and approaches and to study topics and geographic regions that cannot be adequately covered internally. With commensurate support from technical staff who possess diverse skills, including engineering, information technology, and proficiency in quantitative analysis combined with basic geophysical knowledge, the EHP can achieve the geodetic outcomes identified in this document.

Open-File Report↗

Climatic factors related to land-use planning in the Puget Sound basin, Washington

Climate is a basic part of the natural environment and exerts a strong influence on many of man's activities. In the Puget Sound basin especially, effective land-use planning requires consideration of climatic influences, for the climate differs significantly in the various parts of the area. However, climatic information may not be given adequate consideration in the planning process if pertinent data are not readily available or if the importance of some climatic features is not apparent. The purpose of this study is to review available data related to the climate of the Puget Sound basin and to present selected climatic information along with an evaluation of its significance and general adequacy for planning purposes. This is part of continuing efforts aimed at imporving the accessibility and usefulness of environmental and other data needed for land-use planning, resource development, and environmental protection.

Washington↗

Sea-floor character and surface processes in the vicinity of Quicks Hole, Elizabeth Islands, Massachusetts

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Massachusetts Office of Coastal Zone Management (MA CZM), is producing detailed geologic maps of the coastal sea floor. The imagery, interpretive data layers, and data presented herein were derived from multibeam echo-sounder and sidescan sonar surveys conducted in the vicinity of Quicks Hole, a passage through the Elizabeth Islands, which extend in a chain southwest off Cape Cod, Massachusetts, and from the stations occupied to verify these acoustic data (fig. 1). Basic data layers show sea-floor topography, sun-illuminated shaded relief, and backscatter intensity; interpretive layers show the distributions of surficial sediment, sedimentary environments, and sea-floor features. Presented verification data include sediment grain-size analyses and a gallery of still photographs of the seabed. The multibeam and sidescan data, which cover an approximately 22.9-km 2 area of sea floor that extends from Vineyard Sound on the south to Buzzards Bay on the north, were collected during NOAA hydrographic survey H11076 (fig. 1). Although originally collected for charting purposes, these data provide a fundamental framework for research and management activities along this part of the Massachusetts coastline (Noji and others, 2004), show the composition and terrain of the seabed, and provide information on sediment transport and benthic habitat.

Massachusetts↗

Development and analysis of a meteorological database, Argonne National Laboratory, Illinois

A database of hourly values of air temperature, dewpoint temperature, wind speed, and solar radiation from January 1, 1948, to September 30, 2003, primarily using data collected at the Argonne National Laboratory station, was developed for use in continuous-time hydrologic modeling in northeastern Illinois. Missing and apparently erroneous data values were replaced with adjusted values from nearby stations used as 'backup'. Temporal variations in the statistical properties of the data resulting from changes in measurement and data-storage methodologies were adjusted to match the statistical properties resulting from the data-collection procedures that have been in place since January 1, 1989. The adjustments were computed based on the regressions between the primary data series from Argonne National Laboratory and the backup series using data obtained during common periods; the statistical properties of the regressions were used to assign estimated standard errors to values that were adjusted or filled from other series. Each hourly value was assigned a corresponding data-source flag that indicates the source of the value and its transformations. An analysis of the data-source flags indicates that all the series in the database except dewpoint have a similar fraction of Argonne National Laboratory data, with about 89 percent for the entire period, about 86 percent from 1949 through 1988, and about 98 percent from 1989 through 2003. The dewpoint series, for which observations at Argonne National Laboratory did not begin until 1958, has only about 71 percent Argonne National Laboratory data for the entire period, about 63 percent from 1948 through 1988, and about 93 percent from 1989 through 2003, indicating a lower reliability of the dewpoint sensor. A basic statistical analysis of the filled and adjusted data series in the database, and a series of potential evapotranspiration computed from them using the computer program LXPET (Lamoreux Potential Evapotranspiration) also was carried out. This analysis indicates annual cycles in solar radiation and potential evapotranspiration that follow the annual cycle of extraterrestrial solar radiation, whereas temperature and dewpoint annual cycles are lagged by about 1 month relative to the solar cycle. The annual cycle of wind has a late summer minimum, and spring and fall maximums. At the annual time scale, the filled and adjusted data series and computed potential evapotranspiration have significant serial correlation and possibly have significant temporal trends. The inter-annual fluctuations of temperature and dewpoint are weakest, whereas those of wind and potential evapotranspiration are strongest.

Open-File Report↗

Documentation and user's guide for interactive spectral analysis and filter program package useful in the processing of seismic reflection data

The spectral analysis and filter program package is written in the BASIC language for the HP-9845T desktop computer. The program's main purpose is to perform spectral analyses on digitized time-domain data. In addition, band-pass filtering of the data can be performed in the time domain. Various other processes such as autocorrelation can be performed to the time domain data in order to precondition them for spectral analyses. The frequency domain data can also be transformed back into the time domain if desired. Any data can be displayed on the CRT in graphic form using a variety of plot routines. A hard copy can be obtained immediately using the internal thermal printer. Data can also be displayed in tabular form on the CRT or internal thermal printer or it can be stored permanently on a mass storage device like a tape or disk. A list of the processes performed in the order in which they occurred can be displayed at any time.

Open-File Report↗

Holocene core logs and site statistics for modern patch-reef cores: Biscayne National Park, Florida

The bedrock in Biscayne National Park (BNP), a 1,730-square kilometer (km2) region off southeast Florida, consists of Pleistocene (1.8 million years ago (Ma) to 10,000 years ago (ka)) and Holocene (10 ka to present) carbonate rocks (Enos and Perkins, 1977; Halley and others, 1997; Multer and others, 2002). Most of the surficial limestone in BNP, including the islands of the Florida Keys, was formed at ~125 ka during the highstand of marine oxygen-isotope substage 5e, when sea level was approximately 6 meters (m) higher than today (Chappell and Shackleton, 1986; Multer and others, 2002; Lidz and others, 2003; Siddall and others, 2003; Balsillie and Donoghue, 2004). During the substage-5e regression, the entire Florida Platform became exposed. Subaerial exposure lasted for approximately 115,000 years (kyr), which resulted in erosion and enhancement of karst-like features (Lidz and others, 2006). As the Holocene transgression began to flood the Florida shelf ~7 to 6 ka, the bedrock depression under Biscayne Bay began to flood, and Holocene coral and reef debris laid the foundation for the present reef system (Enos and Perkins, 1977; Lighty and others, 1982; Toscano and Macintyre, 2003; Lidz and others, 2006). More than 3,000 patch reefs exist within the BNP boundary. Most contain hermatypic corals of various species such as those belonging to Montastrea, Diploria, Siderastrea, Porites, Acropora, and Agaricia. Patch reefs within BNP have two morphologies: pinnacle and flat top. Experimental Advanced Airborne Research Lidar (EAARL) data collected along the offshore BNP coral reef tract show that these two morphologies are clearly defined both in the high-resolution bathymetry maps produced by the Lidar data and by statistical analyses of the Lidar dataset (Brock and others, 2008). Brock and others (2008) also show that the pinnacle patch reefs are deeper than the more shallow, broad, and flat patch reefs. The control for these two patch-reef morphologies is unclear; however, their shapes may be due to a slightly lowered sea level or a stillstand in the middle-Holocene around 4 ka that caused erosion of the shallower reefs and allowed the deeper reefs to remain unaffected. Lidz and others (2006) have suggested a stillstand around 4 ka that carved a 2.5-kilometer (km)-wide nearshore rock ledge into the seaward side of every island in the Florida Keys. The objectives of this study were to sample living corals to understand the more recent (<200 years) changes in climate and environmental conditions of the area and to investigate the Holocene (in this case, <8,000 years in the Florida Keys) depositional history at progressively deeper patch-reef sites. This report provides statistics for the cores and core sites and a basic lithologic description of these Holocene cores.

Florida↗

Council Monitoring and Assessment Program (CMAP): Inventory of existing water quality and habitat monitoring, and mapping metadata for Gulf of Mexico Programs

Under the Council-Selected Restoration Component of the RESTORE Act, the Council develops Funded Priority Lists (FPLs) that describe the projects and programs it will fund. Projects and programs funded through this component must be in furtherance of the goals and objectives of the Council’s Comprehensive Plan and address at least one of the restoration criteria identified in the RESTORE Act. The Initial FPL, finalized in December of 2015, had a strong focus on watershed and estuary restoration and foundational cross-Gulf projects. Approved as a Gulf-wide investment in the 2015 Initial FPL, The Council Monitoring and Assessment Program (CMAP) is administered jointly by the National Oceanic and Atmospheric Administration (NOAA) and the U.S. Geological Survey (USGS). Funded activities include the development of basic, foundational components for Gulf-wide monitoring to measure beneficial impacts of investments in Gulf restoration by the Council. The program, in coordination with the Gulf of Mexico Alliance (GOMA) and through collaboration with the Gulf States, Federal and local partners, academia, non-governmental organizations, and business and industry, has leveraged existing resources, capacities, and expertise and build on existing monitoring data and programs.

Alabama, Florida, Georgia, Louisiana, Mississippi,↗

A proposed streamflow data program for Michigan

An evaluation of the streamflow data available in Michigan was made to provide guidelines for planning future water resource programs. The basic steps in the evaluation procedure were (1) definition of the long-term goals of the streamflow data program in quantitative form, (2) examination and analysis of all available data to determine which goals have already been met, and (3) consideration of alternate programs and techniques to meet the remaining objectives. It was found that most goals could not be met by regionalization of the data for gaged basins by regression analysis. This fact indicates that few changes can be made in the present program on the basis of computing data by regression formulas. However, regression formulas that include factors not evaluated as a part of this study, may provide a basis for regional streamflow analysis. The evaluation indicated that some changes in the streamgaging network can be made on the basis of length of records already collected. A streamflow data program based on the guidelines developed in this rstudy is proposed for the future.

Michigan↗

U.S. Geological Survey programs in Texas

The U.S. Geological Survey (USGS) is the Federal Government's primary source of data on the quantity and quality of the Nation's water resources, its principal civilian map making agency, and its primary provider of information on natural hazards and mineral, energy, and biological resources. The USGS makes unbiased scientific information available equally to all interested parties. Most USGS work in Texas involves the appraisal of the State's water resources in cooperation with more than 80 local, State, and Federal agencies. The foundation of a wide range of hydrologic data-collection and interpretive programs is the stream-gaging program. The Texas network of streamflow-gaging stations, which provides water data for water-resources planning and design, hydrologic research, and operation of water-resources projects, is part of a nationwide aggregation of networks that is unique because of nationally consistent, prescribed standards by which the data are collected and processed. The USGS continues to expand collection of data for paper and digital maps. The best-known products of the USGS in Texas are its 1:24,000-scale topographic maps. These maps depict basic natural and cultural features of the landscape. Maps at this scale (1 inch on the map represents 2,000 feet on the ground) are useful for civil engineering, land-use planning, and natural-resource monitoring, and have long been favorites with the general public for a wide variety of outdoor uses. The USGS also continues to monitor geologic conditions in Texas associated with rare but potentially dangerous earthquakes. Recently, the Nation Biological Service (now the Biological Resources Division) joined the USGS to continue their appraisal of the nation's biological resources.

Fact Sheet↗

Field methods for measurement of fluvial sediment

This chapter describes equipment and procedures for collection and measurement of fluvial sediment. The complexity of the hydrologic and physical environments and man's ever-increasing data needs make it essential for those responsible for the collection of sediment data to be aware of basic concepts involved in processes of erosion, transport, deposition of sediment, and equipment and procedures necessary to representatively collect sediment data. In addition to an introduction, the chapter has two major sections. The 'Sediment-Sampling Equipment' section encompasses discussions of characteristics and limitations of various models of depth- and point-integrating samplers, single-stage samplers, bed-material samplers, bedload samplers, automatic pumping samplers, and support equipment. The 'Sediment-Sampling Techniques'` section includes discussions of representative sampling criteria, characteristics of sampling sites, equipment selection relative to the sampling conditions and needs, depth and point-integration techniques, surface and dip sampling, determination of transit rates, sampling programs and related data, cold-weather sampling, bed-material and bedload sampling, measuring total sediment discharge, and measuring reservoir sedimentation rates.

Techniques of Water-Resources Investigations↗

Digital Elevation Models

The Earth Science Information Center (ESIC) distributes digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data files may be grouped into four basic types. The first of these, called a Digital Line Graph (DLG), is the line map information in digital form. These data files include information on base data categories, such as transportation, hypsography, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for a number of ground positions at regularly spaced intervals. The third type is Land Use and Land Cover digital data which provides information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for all known places, features, and areas in the United States identified by a proper name.

Data Users Guide↗

Land use and land cover digital data from 1:250,000- and 1:100,000- scale maps

The Earth Science Information Centers (ESIC) distribute digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. The data files are grouped into four basic types. The first type, called a Digital Line Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for ground positions that are usually at regularly spaced intervals. The third type, Land Use and Land Cover digital data, provide information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for known places, features, and areas in the United States identified by a proper name.

Data Users Guide↗

Development of a National Digital Geospatial Data Framework

This proposal of a data framework to organize and enhance the activities of the geospatial data community to meet needs for basic themes of data was developed in response to a request in Executive Order 12906, Coordinating Geographic Data Acquisition and Access: The National Spatial Data Infrastructure (U.S. Executive Office of the President, 1994). The request stated: in consultation with State, local, and tribal governments and within 9 months of the date of this order, the FGDC shall submit a plan and schedule to OMB [U.S. Office of Management and Budget] for completing the initial implementation of a national digital geospatial data framework ("framework") by January 2000 and for establishing a process of ongoing data maintenance. The framework shall include geospatial data that are significant, in the determination of the FGDC, to a broad variety of users within any geographic area or nationwide. At a minimum, the plan shall address how the initial transportation, hydrology, and boundary elements of the framework might be completed by January 1998 in order to support the decennial census of 2000. The proposal was developed by representatives of local, regional, State, and Federal agencies under the auspices of the Federal Geographic Data Committee (FGDC). The individuals are listed in the appendix of this report. This Framework Working Group identified the purpose and goals for the framework; identified incentives for participation; defined the information content; developed preliminary technical, operational, and business contexts; specified the institutional roles needed; and developed a strategy for a phased implementation of the framework.Members of the working group presented the concepts of the framework for discussion at several national and regional public meetings. The draft of the report also was provided for public, written review. These discussions and reviews were the source of many improvements to the report.The FGDC approved the report for submission to the Office of Management and Budget on March 31, 1995.

Report↗

A proposed streamflow data program for South Carolina

An evaluation of the available streamflow data in South Carolina was made to provide guidelines for planning future surface-water data programs. The basic elements in the evaluation procedure were (1) establishment of objectives and goals of the program, (2) examination and analysis of all available data to determine which goals have already been met, (3) consideration of alternate methods of meeting the remaining goals, and (4) identification of elements that should be included in the future program. Four categories of data form the framework of program design. They are: current-purpose data, planning and design data, data to define long-term trends, and stream environment data. An accuracy goal for planning and design data of an equivalent of 25 years of record was specified for principal streams and an equivalent of 10 years of record was specified for minor streams. It was found that many of the goals could be met by generalizing data for gaged basins by regression analysis. Appropriate changes could be made in the present data program based on this fact. A streamflow data program based on the guidelines developed in this study is proposed for the future.

South Carolina↗

United States Geological Survey Yearbook, fiscal year 1980

It is not very often that a single event is so overwhelming that it changes public perceptions of natural hazards for generations. Perhaps for the U.S. Geological Survey, the explosive volcanic activity of Mount St. Helens began such a change. After 101 years of careful science of the Earth's past and meticulous observations and assessments of the present, predictive earth science was in full public view. However vague and faint the glimpse of the future made possible by earth science, it was enough. Warnings were issued, thousands of lives were saved, and the age of real-time geology began. The Survey's basic mission has not changed, but the power of our analytical tools has increased by several orders of magnitude. The Survey's efforts to understand Earth processes and hydrologic principles continued with the collection, during fiscal year 1980, of valuable new data on the geologic origin and framework, seismicity, and mineral and energy resources of the United States. The Survey is also responsible for classification of the leasable minerals on Federal lands and the regulation of mineral exploration and development activities on Federal and Indian lands. As the principal earth science fact-gathering agency, the Survey provides information for sound decisionmaking by government and private industry. Industry uses the Survey's information in exploring for energy and minerals and improving their efforts to make development of energy and minerals compatible with environmental protection standards. Government uses the Survey's information in conducting leasing operations on public lands, in regulating the safe design and siting of nuclear plants, and in establishing guidelines for determining and locating areas that are subject to geologic hazards such as landslides, earthquakes, and volcanic eruptions. The Yearbook reports a broad range of the Survey's accomplishments during the past fiscal year and provides an overview of future directions. Many of the topics covered will continue to be important natural resource and earth science issues of the 1980's.

Yearbook↗

Chester County ground-water atlas, Chester County, Pennsylvania

Chester County encompasses 760 square miles in southeastern Pennsylvania. Groundwater-quality studies have been conducted in the county over several decades to address specific hydrologic issues. This report compiles and describes water-quality data collected during studies conducted mostly after 1990 and summarizes the data in a county-wide perspective. In this report, water-quality constituents are described in regard to what they are, why the constituents are important, and where constituent concentrations vary relative to geology or land use. Water-quality constituents are grouped into logical units to aid presentation: water-quality constituents measured in the field (pH, alkalinity, specific conductance, and dissolved oxygen), common ions, metals, radionuclides, bacteria, nutrients, pesticides, and volatile organic compounds. Water-quality constituents measured in the field, common ions (except chloride), metals, and radionuclides are discussed relative to geology. Bacteria, nutrients, pesticides, and volatile organic compounds are discussed relative to land use. If the U.S. Environmental Protection Agency (USEPA) or Chester County Health Department has drinking water standards for a constituent, the standards are included. Tables and maps are included to assist Chester County residents in understanding the water-quality constituents and their distribution in the county. Ground water in Chester County generally is of good quality and is mostly acidic except in the carbonate rocks and serpentinite, where it is neutral to strongly basic. Calcium carbonate and magnesium carbonate are major constituents of these rocks. Both compounds have high solubility, and, as such, both are major contributors to elevated pH, alkalinity, specific conductance, and the common ions. Elevated pH and alkalinity in carbonate rocks and serpentinite can indicate a potential for scaling in water heaters and household plumbing. Low pH and low alkalinity in the schist, quartzite, and gneiss rocks can indicate a potential for corrosive water. The only constituent measured in the field that has a USEPA Secondary Maximum Contaminant Level (SMCL) is pH. The SMCL for pH is 6.5-8.5; 64 percent of samples analyzed for pH were acidic (below pH 6.5). Only 1 percent of samples were basic (above pH 8.5). Of the common ions, the USEPA has SMCLs for chloride, sulfate, and total dissolved solids. The USEPA has a SMCL and a Primary Maximum Contaminant Level (PMCL) for fluoride. Chloride is more closely related to land use than geology. In Chester County, chloride exceeded the SMCL (250 mg/L) only in 5 percent of the services (commercial services, community services, and military) land-use areas. No samples analyzed for sulfate exceeded the SMCL (250 mg/L). Only 3 percent of samples analyzed for total dissolved solids exceeded the SMCL (500 milligrams per liter) (mg/L). No samples analyzed for fluoride equaled or exceeded the SMCL (2.0 mg/L) or PMCL (4.0 mg/L). Iron concentrations exceeded the USEPA SMCL in 11 percent of samples and were highest in schist (14 percent) and gneiss (13 percent). Manganese concentrations exceeded the SMCL in 19 percent of samples and were highest in quartzite and schist (both 28 percent). Lead and arsenic were present in low concentrations: the highest concentrations of lead occurred in water from quartzite (8 percent exceeded the USEPA Action Level), and arsenic was detected mostly in Triassic sedimentary rocks (9 percent exceeded the USEPA PMCL). The highest concentrations of copper occurred more frequently in quartzite rocks, and to a lesser extent were evenly distributed between ground water in gneiss, schist, and Triassic sedimentary rocks. Elevated concentrations of radon-222 and the combined radium-226/radium-228 radionuclides were common in water from quartzite and schist. Gross alpha and gross beta particle activities were elevated in water from quartzite and carbonate rocks. In contrast, elevated concentrations of uranium primarily were measured in water from Triassic sedimentary and carbonate rocks. Despite a sampling bias towards agricultural land use, only two samples indicated the presence of fecal coliforms. Samples analyzed for nutrients generally exhibited low concentrations, but about 11 percent of samples collected for nitrate exceeded the USEPA PMCL. Only one nitrite sample (less than 1 percent) exceeded the respective USEPA PMCL. Approximately 190 samples were collected for each of the three pesticides in this report: lindane, dieldrin, and diazinon. Sampling was biased towards agricultural, low-medium density residential, and wooded land uses. Approximately 95 percent of samples for each pesticide were below minimum reporting levels (MRL). Only lindane has a USEPA PMCL, and only one sample exceeded the standard. Results for dieldrin and diazinon were similar, except results for two diazinon samples where concentrations were 57.0 and 490 micrograms per liter (μg/L). Volatile organic compounds in this report were analyzed in water from 198 samples. Sampling was biased towards agricultural, low-medium density residential, and wooded land uses. Two percent of samples analyzed for trichloroethylene and less than 1 percent of samples analyzed for tetrachloroethylene exceeded their respective USEPA PMCLs (each 5.0 μg/L). No samples analyzed for 1,1,1-trichloroethane exceeded the USEPA PMCL (200 μg/L). No samples analyzed for methyl tert-butyl ether exceeded the USEPA Drinking Water Advisory (20μg/L).

Open-File Report↗

Digital line graphs from 1:24,000-scale maps

The Earth Science Information Centers (ESIC) distribute digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data flles are grouped into four basic types. The first of these, called a Digital Line . Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for a number of ground positions that are usually at regularly spaced intervals. The third type is Land Use and Land Cover digital data, which provides information on nine major classes of land use such as urban, agricultural, or forest as wen as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for all known places, features, and areas in the United States identified by a proper name.

Data Users Guide↗