USGS Science⌕ Search

SEARCH · USGS Science

Results for “Annual Review of Environment and Resources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,696 records · Page 34Linked to original sources
USGS2026

A targeted approach for mapping groundwater discharge to surface water and fish thermal refuge in four Lake Ontario tributaries

The duration, magnitude, and frequency of heatwaves are predicted to increase in the coming decades, a combination that can reduce the survival of many fish species. Across the world, there is broad interest in identifying thermal refuge for heat-intolerant fish species and exploring opportunities to enhance or protect these areas. Because deeper groundwater maintains a relatively constant temperature, groundwater-influenced areas along streams can provide cool-water refuge for fish during periods of extreme heat. A targeted approach was developed for identifying existing cold-water zones and areas of substantial groundwater discharge in four high priority Lake Ontario tributaries. Our approach included: (1) predicting where groundwater discharge is most likely with a simple geospatial model and (2) using model predictions to select field sites for intensive high-resolution study, including ground-based mapping of groundwater features (springs, seeps, tributaries) as well as drone-based optical and thermal infrared surveys. Results from field sites were used to both verify model performance and map different types and aerial extents of thermal anomalies. Geospatial modelling successfully predicted regions of widespread groundwater upwelling, later verified and mapped by field and drone surveys. Comparison of model and field survey results further highlighted specific geospatial layers, such as soil/bedrock types and topographic wetness index, as being particularly useful for predicting groundwater influence on streams in the study area. In addition, a comparison of geospatial model results with a model of fish abundances along the studied streams showed significant positive correlations for many heat-intolerant fish species over a wide geographic area. The approach developed in this study can be applied to other watersheds to highlight areas of probable groundwater discharge and could be used by fishery and water resource managers to support cold-water fish habitat management decision-making and resource conservation.

New York↗
USGS2025

Flood-inundation maps for 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, 2023

Digital flood-inundation map libraries for two reaches that constitute 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at Little Papillion Creek at Irvington, Nebr. (USGS station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (USGS station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (USGS station 06610770) streamgages. Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/ . Flood profiles were computed for two different reaches that constitute 14.8 miles of stream length in the study area by using hydraulic models. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot stage intervals for selected stage ranges to represent various flooding scenarios at the streamgages in each reach. The simulated water-surface profiles then were combined with a digital elevation model using a geographic information system, which had a 10-foot grid spacing to delineate the flooding extents and water depths for each stage. The availability of these flood-inundation maps, along with information regarding current stage from the USGS streamgages, can provide emergency management personnel and residents with information that is critical for flood response activities and post flood recovery efforts.

Nebraska↗
USGS2024

Separating signals in elevation data improves supervised machine learning predictions for hydrothermal favorability

A recent study identified topography (land surface elevation above sea level) as an important input dataset (feature) for predicting the location of hydrothermal systems in the Great Basin in Nevada. Yet, topography is generally a result of more than one geological process and may consequently contain multiple distinct signals. For example, the geologic evolution of the Great Basin has produced both crustal thickening (i.e., regional-scale trends in elevation) and thinning via Basin and Range extensional faulting (i.e., valley-scale topographic relief). We postulate that these geologic processes may affect the occurrence of hydrothermal systems differently. Therefore, we separate the regional trend from the valley-scale signal in the Great Basin, and then use them separately to evaluate the importance of each as predictors for hydrothermal favorability. Our prior work applying supervised machine learning (ML) using the data from the Nevada Machine Learning Project demonstrated that employing a training strategy that randomly selects negative training sites produces better performing models for predicting hydrothermal favorability than a training strategy that uses expert-selected negatives. The models created using both training strategies exhibited a west-east geographic trend in the predictions for the favorability of hydrothermal resources. These models generally predicted higher favorability in western Nevada and lower favorability in eastern Nevada. This west-east trend in predicted favorability correlates with elevation across the Great Basin, which trends higher from west to east. By separating the original elevation feature into distinct features for elevation trend (i.e., regional-scale topography) and detrended elevation (i.e., valley-scale or local relative topography), we find that models using the separated topographic signals consistently outperform competing models that use the original elevation feature. Although western Nevada still exhibits higher favorability than eastern Nevada, using separated signals for regional elevation and local structure reduces the west-east prediction trend in the region and emphasizes structures associated with hydrothermal upflow. This work emphasizes how carefully engineering features to represent geological conditions relevant to hydrothermal systems allows ML algorithms to detect important patterns for predicting hydrothermal resource favorability and leads to better model performance.

Conference Paper↗
USGS2025

Leveraging wildfire to augment forest management and amplify forest resilience

Successive catastrophic wildfire seasons in western North America have escalated the urgency around reducing fire risk to communities and ecosystems. In historically frequent-fire forests, fuel buildup as a result of fire exclusion is contributing to increased fire severity. The probability of high-severity fire can be reduced by active forest management that reduces fuels, prompting federal and state agencies to commit significant resources to increase the pace and scale of fuel reduction treatments. However, lower severity areas of wildfires also have the potential to act as “treatments,” and even catastrophic fires with large areas of high severity can still have substantial areas of lower severity fire that may be improving forest conditions locally. We quantified active management and wildfire severity across yellow pine and mixed conifer (YPMC) forests in the Sierra Nevada of California over a 22-year period (2001–2022). We did not detect increases in the area treated through time, but the area of beneficial wildfire (low to moderate severity) increased substantially, exceeding active treatment area in 8 of 22 years. Overall, beneficial wildfire treated ~17% more area than all treatments combined, and roughly four times more area than fire-related treatments alone. We then used disturbance history to evaluate resistance to high-severity wildfire and forest loss across the YPMC range. Of the 2.3 million ha YPMC of forests in 2001, 20% lost mature forests due to high-severity fire by 2022, which is nearly half of all YPMC area burned. Most of the landscape (47%) remains at risk of high-severity fire because it had no restorative disturbances, but 33% of the study area has some level of resistance to high-severity wildfire. In these areas, resistance will need to be enhanced and maintained over time via active management or managed wildfire, but these treatment needs will likely outpace capacity even under optimistic implementation scenarios. Given limited resources for implementing active management and the likelihood of a more fiery future, incorporating beneficial wildfire into landscape-level treatment planning has the potential to amplify the impact of active management treatments.

California, Nevada↗
USGS2024

New U-Pb geochronology and geochemistry of Paleozoic metaigneous rocks from western Yukon and eastern Alaska, cross-border synthesis, and implications for tectonic models

The tectonic evolution of and relation between the Yukon-Tanana terrane and the Lake George assemblage, as well as other associated tectonic assemblages in western Yukon and eastern Alaska, have been debated for decades. The Yukon-Tanana terrane is widely considered to be an allochthonous rifted fragment derived from the Laurentian continental margin, whereas the Lake George assemblage and associated assemblages are currently interpreted to be part of the parautochthonous continental margin of western North America (Laurentia). To address these topics, we present 40 new U-Pb zircon ages and 20 new whole-rock geochemical analyses. We incorporate these data into a new compilation of available geological mapping for a large area that straddles the Alaska-Yukon border, together with 34 previously published U-Pb age determinations and an extensive geochemical database of metaigneous rocks from Late Devonian to Early Mississippian and middle to late Permian assemblages in this area. Magmatism in the Lake George assemblage and related assemblages occurred in two pulses from about 371 to 360 and from about 358 to 347 million years ago (Ma); geochemical discrimination diagrams indicate a large crustal component, possibly indicative of arc magmatism, for felsic metaigneous rocks and a range of tectonic environments for mafic rocks. Magmatism in the Fortymile River and related assemblages, and parts of the Nasina assemblage—all parts of the Yukon-Tanana terrane—are mainly Early Mississippian and span a crystallization age range from about 361 to 343 Ma; geochemical discrimination diagrams for these rocks indicate primarily arc geochemical signatures for both mafic and felsic rocks. Middle to late Permian crystallization ages (about 261–253 Ma) are indicated for felsic metaigneous rocks in the Klondike assemblage and some of the felsic metaigneous rocks in the Nasina assemblage. Based on our mapping, we propose the existence of a possible unconformity between the Mississippian and Permian felsic metavolcanic rocks within the Nasina assemblage that is marked by sporadic occurrences of stretched-pebble conglomerate. Our combined database supports the well-established model of a magmatic arc comprising the Fortymile River and Finlayson assemblages of the rifted Yukon-Tanana terrane continental fragment on which a middle to late Permian arc (Klondike assemblage) was later built. The assemblages of the Yukon-Tanana terrane were subsequently intruded by Late Triassic to Early Jurassic granitoids, presumably during reaccretion of the Yukon-Tanana terrane to the continental margin. Permian and Late Triassic to Early Jurassic intrusions have not been mapped in the now structurally lower plate Lake George assemblage; their absence is one of the lines of evidence that have been used to support the parautochthonous, rather than allochthonous, origin of the Lake George assemblage and related assemblages. Our new data, together with previously published ranges of igneous crystallization ages and geochemical tectonic signatures of the Late Devonian to Early Mississippian magmatic rocks in the Lake George assemblage and associated assemblages and in the Fortymile River, Nasina, and correlated assemblages of the Yukon-Tanana terrane, indicate that the currently accepted interpretation of the Lake George assemblage and associated rocks being part of parauthochthonous North America is not the only possible interpretation of this tectonic entity. Approximately half of the dated intrusive rocks in the Lake George assemblage are contemporaneous with the metaigneous rocks of the Yukon-Tanana terrane arc (<361 Ma). We speculate that our approximately 361 Ma U-Pb age for quartz syenite in part of the North American continental margin in south-central Yukon defines the beginning of rifting of the Laurentian margin. Although the currently favored model of prolonged middle Paleozoic subduction and extension in both the Yukon-Tanana terrane and parautochthonous North America allows for simultaneous middle Paleozoic magmatism on both sides of the Slide Mountain Ocean, we now propose an alternative hypothesis in which the Lake George assemblage represents a deeper part of the rifted Yukon-Tanana terrane arc. If this is the case, the absence of Permian and Late Triassic to Early Jurassic arc rocks in the Lake George assemblage could be explained either by the arcs of these ages not being wide enough to have affected the Lake George assemblage or by tectonic displacement of these arc rocks away from the Lake George assemblage. Our approximately 259 Ma U-Pb zircon age and geochemical analyses of metarhyolite in the Seventymile terrane in Alaska, which comprises remnants of the back-arc basin that separated the Yukon-Tanana terrane from the Laurentian continental margin, confirm the presence of a late middle Permian volcanic arc component to the terrane. Our approximately 319 Ma U-Pb zircon age from the Chicken assemblage (as redefined in this study) in eastern Alaska, combined with previously reported fossil ages and a U-Pb zircon age from this assemblage, indicate that it is a Late Mississippian to Early Pennsylvanian arc assemblage. We propose several other relatively young, locally developed arc assemblages outboard of the ancient continental margin of Laurentia that may correlate with the Chicken assemblage, but we consider its origin to remain an enigma.

Alaska↗
USGS2025

Exploration for blind geothermal systems in the eastern Great Basin of Utah: An update on the “Lund North” INGENIOUS detailed study site

Existing geothermal production in Utah is commonly collocated with surficial expressions of geothermal heat including active hot springs and hot spring deposits. However, geothermal potential across the Great Basin region is thought to be much higher for hidden or blind geothermal systems. Accordingly, exploration techniques that can locate geothermal resources that lack surface thermal features could support future development of these systems. The goal of the INGENIOUS project is to reduce exploration risk and discover new, economically viable hidden geothermal systems in the Great Basin region. This paper summarizes the efforts and preliminary results of blind geothermal resource prospecting in Utah as part of the larger INGENIOUS project. The Lund North site in the Basin and Range province of southwest Utah was designated as the fourth detailed study site for the project. The site was initially identified from the preliminary Play Fairway Analysis (PFA) geothermal favorability map, which is based on various data elements, and the identification of favorable structural settings across Utah. This site contains existing legacy data including a thermal gradient borehole with a heat-flow value exceeding 220 mW/m 2 . New data collected at this site include terrestrial gravity, magnetotellurics, transient electromagnetics, fluid geochemistry, geologic mapping, UAV-based lidar, paleomagnetism, aeromagnetic surveys, and a shallow temperature survey. Preliminary data and model interpretations corroborate the presence of a large, east-dipping, northeast-southwest-trending normal fault on the edge of a typical Basin and Range graben. Quaternary fault mapping refined by high-resolution lidar surveys suggests a complex step over fault geometry. Utilizing multi-disciplinary datasets for further site assessment at Lund North will facilitate the development of a local-scale PFA and geothermal conceptual model. This new data will be used to site successive thermal gradient drilling to verify heat flow with temperatures at depth at the Lund North site and further investigate the existence of a local geothermal system.

Utah↗
USGS2010

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Effective communication in the geosciences requires consistent uses of stratigraphic nomenclature, especially divisions of geologic time. A geologic time scale is composed of standard stratigraphic divisions based on rock sequences and is calibrated in years. Over the years, the development of new dating methods and the refinement of previous methods have stimulated revisions to geologic time scales. Advances in stratigraphy and geochronology require that any time scale be periodically updated. Therefore, Divisions of Geologic Time, which shows the major chronostratigraphic (position) and geochronologic (time) units, is intended to be a dynamic resource that will be modified to include accepted changes of unit names and boundary age estimates. This fact sheet is a modification of USGS Fact Sheet 2007-3015 by the U.S. Geological Survey Geologic Names Committee.

Fact Sheet↗
USGS2025

Rare earth elements on the Moon

Rare earth elements (REEs) are a scarce but vital resource for our modern economies and lifestyles. Since the late 1990s, China has supplied the vast majority of the world’s refined REEs. Increasing global demand has broadened the search for REE deposits to unconventional places, including the Moon. Although most lunar rocks have very low REE concentrations, Apollo samples showed that one type of lunar rock containing potassium (K), REEs, and phosphorus (P)—known by the acronym KREEP—has high concentrations of REEs. Data from orbiting satellites have identified locations where substantial deposits of KREEP are likely. The viability of mining these deposits depends on the evolution of REE economics, the development of the Earth-Moon infrastructure, and the findings from future lunar mineral exploration missions.

Fact Sheet↗
USGS2025

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗
USGS1976

Trace elements in some rocks and slag from the Yemen Arab Republic and their bearing on the iron ore near Sa'dah

Thirty-seven samples of rocks, saprolite, laterite, gossan, and slag were collected in the Yemen Arab Republic during June-July 1975 when field work was conducted to refine an interpretation of the regional geology made from LANDSAT-1 images by M. J. Grolier. These samples we reanalyzed in the laboratories of the U. S. Geological Survey, and the results were interpreted for use in programs of economic development as a guide for the evaluation of mineral resources in the Yemen Arab Republic. The work was undertaken as part of the program of the U. S. Agency for International Development with the cooperation of the Mineral and Petroleum Authority, Ministry of Economy, Yemen Arab Republic.

Open-File Report↗
USGS2025

Footprints of past mining in Alaska (USA) derived from high-resolution satellite imagery

Mapping the land area used for mining in the past is essential for guiding the remediation of affected landscapes and assessing the resource potential of related waste products. Despite significant recent progress delineating footprints of active and inactive mining globally, the known inventory of such mine lands remains incomplete. Here, I describe a new map dataset of footprints of land surface disturbance and waste at sites of past mining in Alaska (USA) based on visual interpretation of satellite imagery. This dataset maps 6–14 times the area of previous regional and global mine footprint maps in Alaska and is the first in the region to explicitly delineate mine waste landforms (e.g., tailings piles). The data are publicly available from the U.S. Geological Survey under a “no rights reserved” Creative Commons (CC0) license agreement.

Alaska↗
USGS2025

Reconnaissance of potential alternate water supply sources for the City of Gary, West Virginia

Seven potential sources of water, consisting of free-flowing discharge from abandoned coal mines at six locations and one abandoned flooded underground coal mine air shaft, were sampled for chemical analysis to assess the quality of the groundwater emanating from the seven mine sources. The six free-flowing mine discharge sources were also assessed for discharge by current-meter measurements on two separate occasions. The U.S. Geological Survey assessed these seven sources to provide information to the City of Gary, West Virginia (W. Va.), and the City of Gary’s consulting engineer with groundwater-quality and flow data to allow them to assess the seven sites as potential alternate sources of water for the City of Gary to augment its existing supply. For the six sites where discharge could be measured, discharge ranged from a minimum of 0.082 cubic feet per second (ft 3 /s) to a maximum of 3.685 ft 3 /s. Of the six sites measured, only two, Harmon Branch at Thorpe, W. Va. (USGS site 372201081303501) and the abandoned public-supply water wells near Havaco, W. Va. (USGS site 372358081344601), had discharge in excess of 1.00 ft 3 /s. Discharge from the abandoned public supply wells was 3.685 ft 3 /s on September 20, 2023, and 2.888 ft 3 /s on October 16, 2023, and discharge from Harmon Branch at Thorpe, W. Va., was 1.049 ft 3 /s on September 22, 2023, and 1.038 ft 3 /s on October 17, 2023. Discharge in the abandoned underground mine air shaft (USGS site 372224081340901) could not be assessed, but the air shaft drains an abandoned mine that likely contains water stored in approximately 1.7 square miles (mi 2 ) of abandoned underground coal mines in the Pocahontas No. 3 coal seam, and possibly an additional 0.9 mi 2 of leakage from the overlying Pocahontas No. 4 coal seam. Discharge for the six sites measured for the study was measured during a period between September 20 and October 18, 2023, and corresponded to the 12th to the 15th percentile of flow-duration statistics for the Tug Fork downstream of Elkhorn Creek at Welch, W. Va. streamgage (USGS site 03212750). Water-quality data for the seven sites sampled overall were acceptable with respect to drinking water standards. Of the 203 constituents analyzed, only a few failed to meet applicable U.S. Environmental Protection Agency (EPA) drinking water standards. Iron exceeded the 300 micrograms per liter (μg/L) secondary maximum contaminant level (SMCL) at only 1 of the 7 sites (14.3 percent) sampled. Iron concentrations ranged from a minimum of less than (<) 5.00 μg/L to a maximum of 724 μg/L with a median concentration of 7.62 μg/L. Manganese exceeded the 50.0 μg/L SMCL at 2 of the 7 sites (28.6 percent) sampled. Manganese concentrations ranged from a minimum of 1.93 μg/L to a maximum of 271 μg/L with a median concentration of 4.03 μg/L. No sites sampled exceeded the arsenic maximum contaminant level (MCL) of 10 μg/L. Arsenic concentrations ranged from a minimum of <0.100 μg/L to a maximum of 2.35 μg/L with a median arsenic concentration of 0.200 μg/L. None of the seven sites sampled for selenium for this study exceeded the EPA MCL of 50.0 μg/L. Selenium concentrations ranged from a minimum of <0.050 μg/L to a maximum of 5.26 μg/L with a median concentration of 3.21 μg/L. All seven sites were sampled for volatile organic compounds (VOCs), semivolatile organic compounds (SVOCs), and polychlorinated biphenyls (PCBs), but most had concentrations below the detection limit. Of the 10 PCB compounds analyzed for the seven sites sampled, none contained detectable concentrations of PCBs or Aroclor compounds. Of the 44 SVOCs analyzed at each of the seven sites sampled, only 1 SVOC, acenaphthene, was detected, at a concentration of 0.02 μg/L. Of the 96 VOCs analyzed, from each of the seven sites sampled, only two were found at detectable concentrations. Trichloromethane was detected only at 1 of the 7 (14.3 percent) sites sampled at a concentration of 0.027 μg/L, and benzene was detected at the same site and 3 additional sites (4 of the 7 sites or 57.1 percent of the sites sampled) at concentrations of 0.028, 0.029, 0.021, and 0.035 μg/L, but none exceeded the EPA MCL for benzene of 5.00 μg/L. Total coliform bacteria are ubiquitous in the environment, and their presence only suggests the potential for contamination by near-surface processes. Escherichia coli ( E. coli ) bacteria are derived from either human or animal fecal material and can be an indicator of potential contamination by pathogenic bacteria or viruses. Total coliform bacteria were detected at all 7 sites sampled at concentrations ranging from 17.5 to greater than (>) 2,420 most probable number per 100 mL (MPN/100 mL) of sample, with a median total coliform concentration of 1,553 MPN/100 mL. Escherichia coli bacteria were detected at 4 of the 7 sites sampled at concentrations ranging from <1 to 11.9 MPN/100 mL, with a median E. coli concentration of 5.1 MPN/100 mL.

West Virginia↗
USGS2025

Geochemistry of quartz and fluid inclusions associated with gold, tungsten, and antimony in the Stibnite-Yellow Pine district, Idaho

Deposits in the historic Stibnite-Yellow Pine district in east-central Idaho were mined for Ag, Au, Hg, Sb, and W. Ore is hosted in breccia and fault zones along NE-striking faults that transect the Atlanta lobe of the Late Cretaceous Idaho batholith and metamorphosed Neoproterozoic to lower Paleozoic rocks. Geochronological studies have delineated five superimposed and zoned hydrothermal events in the mining district which range in age from Late Cretaceous to the Eocene. They formed the following consecutive assemblages: (1) vein and disseminated pre-ore milky quartz (± calcite), muscovite, and brassy pyrite with minor molybdenite and base metal sulfides; (2) vein and disseminated quartz, calcite, sericite, auriferous-pyrite, and arsenopyrite; (3) potassium feldspar, quartz, dolomite, and calcite with vein and disseminated scheelite ± pyrite and arsenopyrite; (4) Au-Ag veins that contain adularia; and (5) breccia, vein, and disseminated quartz, calcite, and stibnite with minor Ag sulfosalts and distal zones of cinnabar and realgar at Fern and Hermes mines. In this study, the pressure, temperature, and composition of ore-forming fluids were measured in Au-, W-, and Sb-bearing samples collected from drill core and surface exposures. Using optical petrography, scanning electron microscopy cathodoluminescence (SEM-CL) and electron microprobe cathodoluminescence (EMPA-CL) imaging, as well as electron microprobe (EMP) and laser ablation-inductively coupled plasma-mass spectrometry trace element analyses, four major overprinting generations of hydrothermal quartz are defined. Fluid inclusion assemblages (FIAs) in each generation of quartz were characterized by microthermometry and laser Raman spectroscopy. Quartz and fluid inclusion paragenesis are as follows: (Qi) altered and overprinted Qi with no coeval FIAs that formed before or during event 1; (Q1) early veins as well as disseminated quartz with dull gray SEM-CL and H 2 O-NaCl-CO 2 FIAs that formed at minimum temperatures and pressures of 281° to 358°C and 1346 to 1789 bar during event 2 (Au); (Q2) vein and disseminated quartz, often euhedral, with H 2 O-NaCl ± CO 2 ± CH 4 FIAs that formed at minimum temperatures and pressures of 183° to 213°C and 72 to 602 bar during event 3 (W); and (Q3) euhedral and disseminated quartz with H 2 O-NaCl FIAs that formed at minimum temperature and pressures of 156° to 161°C and 5 to 6 bar during event 5 (Sb). Stibnite hosts H 2 O-NaCl FIAs trapped at minimum temperatures and pressures of 150° to 189°C and 5 to 12 bar that are similar to those of Q3-hosted FIAs. The quartz paragenetic history in the district follows a progressive temporal path from Tienriched quartz deposited by a relatively deep and higher temperature aqueous-carbonic fluid to a Li, Al, and Sb enriched quartz precipitated from a lower temperature aqueous fluid. Gases in fluid inclusion extracts from ore and gangue minerals were analyzed by mass spectrometry. Noble gas isotope analysis of fluid inclusion extracts revealed three signatures. Pre-ore Qi has R/R A (the isotopic ratio of the sample 3 He/ 4 He to atmospheric 3 He/ 4 He (1.384 × 10 −6 )) values that reflect the composition of the crustal melt-derived Atlanta lobe of the Idaho batholith. Quartz (Q1) and auriferous arsenian pyrite of hydrothermal event 2 have 20 Ne/ 4 He and R/R A values that plot along the air-crust mixing line, and these gases were likely introduced by metamorphic fluids derived from metasedimentary rocks. Stibnite with associated quartz (Q3 ± Q2) have 20 Ne/ 4 He and R/R A values that extend from the air-crust mixing line to the air-mantle mixing line, showing a shift from a crustal signature to an overprinting mantle signature. Late calcite has 20 Ne/ 4 He and R/R A values that extend from air toward the mantle end member, which suggests that magmatic volatiles condensed into meteoric groundwater late in the paragenesis. A mantle volatile source is also supported by high 20 Ne/ 22 Ne ratios. The Stibnite-Yellow Pine district is similar to other Au-W-Sb districts around the world in ore fluid chemistries, with late-stage stibnite being a product of cooling. The fluid pressure-temperature-composition (P-T-X) estimates and the crustal source of He during hydrothermal event 2 gold mineralization are characteristic of orogenic Au deposits, and the observed inclusion reequilibration textures indicate that trapped fluid inclusions were deformed during transitions between the brittle-ductile environment. Scheelite was deposited during event 3 with Q2 quartz and is overgrown by Q3 quartz and stibnite. Our interpretation of the quartz texture, chemistry, and fluid inclusion P-T-X data suggest that Au, W, and Sb mineralization occurred as hydrothermal fluids evolved from H 2 O-NaCl-CO 2 at >300°C and depths of ~4 to 6 km near the ductile to brittle transition to H 2 O-NaCl at ~150°C and epithermal depths as the Idaho batholith was exhumed. Geochronology indicates that from the Late Cretaceous to early Eocene, overprinting hydrothermal events formed deep orogenic Au, intermediate W, and shallow epithermal Au-Ag and Sb. Without comprehensive geochronologic constraints, our fluid inclusion data and textural observations could be interpreted as a single evolving hydrothermal system, as has been done in many other mining districts with similar mineralization.

Idaho↗
USGS2024

Status and understanding of groundwater quality in the Mojave Basin Domestic-Supply Aquifer study unit, 2018—California GAMA Priority Basin Project

Groundwater quality in the western part of the Mojave Desert in San Bernardino County, California, was investigated in 2018 as part of the California State Water Resources Control Board Groundwater Ambient Monitoring and Assessment Program Priority Basin Project. The Mojave Basin Domestic-Supply Aquifer study unit (MOBS) region was divided into two study areas—floodplain and regional—to assess differences between the two major aquifers used for drinking water supply in the area. This assessment characterized the quality of ambient groundwater and not the quality of treated drinking water. The study included three components: (1) a status assessment, which characterized the quality of groundwater resources used for domestic drinking-water supply in the floodplain and regional study areas; (2) a brief understanding assessment, which evaluated factors that could potentially affect the quality of groundwater used by domestic wells in the region; and (3) a comparative assessment between the groundwater resources used by domestic wells and public-supply wells in the two study areas. The domestic-well assessment was based on data collected by the U.S. Geological Survey from 48 domestic wells in January–May 2018. The public-supply assessment was based on data for samples from 322 public-supply wells in 2008–18, either collected by the U.S. Geological Survey or compiled from the California State Water Resources Control Boards Division of Drinking Water publicly available database. Concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. Relative concentrations, defined as the measured concentration divided by the benchmark concentration, were classified as high (greater than 1.0), moderate (greater than 0.5 for inorganic constituents or 0.1 for organic and special-interest constituents, and not high), or low (concentrations lower than moderate). The floodplain and regional study areas were divided into 15 and 35 grid cells, respectively, and grid-based methods were used to compute the areal proportions of the two study areas with high, moderate, or low relative concentrations of individual constituents and classes of constituents. For the domestic-supply assessment, one or more inorganic constituents with health-based benchmarks were detected at high relative concentrations in 58 percent of the regional study area and 13 percent of the floodplain study area. The inorganic constituents with health-based benchmarks detected at high relative concentrations in the regional study area were arsenic, chromium and hexavalent chromium, fluoride, adjusted gross alpha particle activity, uranium, molybdenum, strontium, and nitrate; only arsenic was detected at high relative concentrations in the floodplain study area. One or more inorganic constituents with secondary maximum contaminant level benchmarks were detected at high concentrations in 15 and 6.7 percent of the regional and floodplain study areas, respectively. The constituents detected at high relative concentrations in the regional study area were total dissolved solids, chloride, sulfate, and iron; only total dissolved solids and sulfate were detected at high relative concentrations in the floodplain study area. Organic constituents were not detected at moderate or high relative concentrations in either the regional or floodplain study areas. Volatile organic compounds were detected at low relative concentrations in 21 and 27 percent of the regional and floodplain study areas, respectively, and pesticides were detected at low relative concentrations in 9.1 and 20 percent of the regional and floodplain study areas, respectively. The only individual organic constituent detected in more than 10 percent of either study area was the trihalomethane trichloromethane. Total coliform bacteria were detected in 15 and 27 percent of the grid wells in the regional and floodplain study areas, respectively. The greater prevalence of high relative concentrations of many inorganic constituents in the regional study area compared to the floodplain area likely indicates the greater diversity of geologic material at depth in aquifer material and generally finer-grained alluvium compared to the floodplain study area combined with generally older groundwater that has had more contact time with aquifer materials. In general, trace element concentrations (1) increased with increasing groundwater age, (2) increased with distance from recharge sources in the mountains, and (3) increased with closer proximity to some types of geological units. In general, groundwater from domestic wells in the floodplain study area is young, with most samples containing a component of modern groundwater based on tritium and unadjusted carbon-14 activities, whereas groundwater from domestic wells in the regional study area generally is old, with most samples having unadjusted carbon-14 ages of 5,000–40,000 years. Public-supply wells in MOBS generally were deeper than domestic wells and presumably are in contact with older, more weathered alluvium that may have more mobile trace elements, such as arsenic or uranium. However, only 26 percent of the public-supply regional study area had high relative concentrations of inorganic constituents, compared to 58 percent for the domestic regional study area. The percentages of the public-supply and domestic floodplain study areas with high relative concentrations of inorganic constituents were 11 and 13 percent, respectively. The ages of groundwater used by public-supply and domestic wells in each study area were similar, which was not expected given the greater depth of the public-supply wells. Three potential factors may contribute to these results: (1) greater spatial footprint of domestic well network, which may result in domestic wells pumping groundwater from fractured bedrock or mineralized areas not used by public-supply wells; (2) greater pumping rates in public-supply wells, resulting in more water being withdrawn from coarse-grained, heterogeneous alluvium than finer-grained layers, which may have higher concentrations of (or more mobile) inorganic constituents; and (3) a greater degree of well management with public-supply wells, which may include pausing use of or decommissioning wells if treating or blending water is not feasible to lower constituent concentrations.

California↗
USGS2025

PFAS sampling activities in the U.S. Geological Survey national networks

Per- and polyfluoroalkyl substances (PFAS), frequently called “forever chemicals,” are used for a wide variety of industrial purposes and are often found in common household and industrial items such as firefighting foams, non-stick cookware, and water-resistant materials. The contamination of water, air, and soil by PFAS is a national and global issue due to their widespread occurrence in multiple applications and resistance to biodegradation and other traditional treatment processes. Research indicates that many PFAS can be emitted to the atmosphere and transported and deposited long distances from the source. The U.S. Geological Survey (USGS) Water Resources Mission Area received funding to implement a national-scale sampling effort to assess PFAS occurrence. To follow agency directives, the National Water Quality Network (NWQN) added PFAS sample monitoring for both surface water and groundwater, and also added PFAS monitoring to selected sites in the National Atmospheric Deposition Program (NADP).

General Information Product↗
USGS2025

Benthic habitat map of Olowalu Reef, Maui, Hawaii—Geomorphological structure, biological cover, and geologic zonation determined with spectral, lidar, and acoustic data

The fringing coral reef off Olowalu, Maui, Hawaii, has been identified as a local conservation priority site. In 2007, the National Oceanic and Atmospheric Administration (NOAA) produced a benthic habitat map of the Hawaiian Islands that was used as a foundation for this study. To support place-based management of the reef in the future, the U.S. Geological Survey (USGS) mapped the geologic zone, major and dominant geomorphological structure, biological cover type, and percent of biological cover for 11 square kilometers (km 2 ) of Olowalu Reef at a minimum mapping unit (MMU) of 100 square meters (m 2 ) to create a benthic habitat map. Heads-up digitization was employed on 0.50-meter (m) natural color satellite orthoimagery with ancillary 1-m acoustic backscatter imagery from single-scan sonar (sound navigation and ranging). A 1-m, 4-m, and 8-m digital bathymetric model (DBM) was interpolated from bathymetric lidar (light detection and ranging), and various geomorphometric layers derived from the DBMs were used for habitat interpretation. Still-frame imagery of the seafloor extracted from vessel-towed underwater video transects on Olowalu Reef served as ground validation points ( n =870) during active mapping and accuracy assessment points ( n =216) for thematic accuracy assessment. Thematic accuracy was cross-validated by the Hawai‘i Department of Land and Natural Resources Division of Aquatic Resources. Final thematic accuracy was 88.8 percent for major structure, 85.6 percent for dominant structure, 86.0 percent for major biological cover, and 78.6 percent for type and percent of major biological cover. Reef and hardbottom constituted 52 percent of the total mapped habitat, comprising mostly aggregate reef (31 percent) and pavement (11 percent), with large swaths of spur-and-groove (9 percent). Of this hardbottom, 17 percent was covered with moderate (10 to <50 percent) coral and 27 percent with high coral cover (50 to <90 percent). High (50 to <90 percent) macroalgae cover dominated the continuous sand sheets in offshore bank/shelf zones. The map created in this study supplements the NOAA 2007 map and expands on the observations made by USGS sampling of the reef. The NOAA 2007 map and our map differed in total areal extent by a negligible 6 m 2 and were in general thematic agreement. Our map is intended to serve as a baseline for public access, general research, local-level management, and reef change for future studies.

Hawaii↗
USGS2026

Asynchronous landslide seasonality across the United States

Mid-range landslide outlooks can facilitate weather-related landslide preparedness and disaster response planning, but seasonal landslide activity remains poorly quantified at continental scales. Leveraging >55,000 reported landslides from across the United States (U.S.), we used circular statistics to quantify landslide seasonality in 67 National Weather Service County Warning Areas (CWAs). We found regional differences in landslide season timing and duration, with transitions between domains variably corresponding to climate class or river basin. We assessed differences in seasonality by movement type for slides, flows, and falls, detecting apparent, but uncertain, differences between slide and fall seasonalities in 27 of 35 (77%) of CWAs with both types reported. In the Pacific Northwest, where long records exist, we found a credible shift toward a later mean landslide season in western Washington from 1990 to 2020, but no trend in western Oregon. Our results can provide emergency planners a resource to assess seasonal landslide probability nationwide.

Geophysical Research Letters↗
USGS2025

The role of bedrock circulation depth and porosity in mountain streamflow response to prolonged drought

Quantitative understanding is lacking on how the depth of active groundwater circulation in bedrock affects mountain streamflow response to a multi‐year drought. We use an integrated hydrological model to explore the sensitivity of a variety of streamflow metrics to bedrock circulation depth and porosity under a plausible extreme drought scenario lasting up to 5 years. Endmember depth versus hydraulic conductivity relationships and porosity values for fractured crystalline rock are simulated. With drought, a deeper circulation system with higher drainable porosity more effectively buffers minimum flow and significantly limits perennial stream loss in comparison to a shallow circulation system. Streamflow buffering is accomplished through extensive groundwater storage loss. However, deeper circulation systems experience prolonged recovery from drought in comparison to storage‐limited shallow systems. Research highlights the importance of characterizing the deeper bedrock hydrogeology in mountainous watersheds to better understand and predict drought impacts on stream ecosystem health and water resource sustainability.

Colorado↗