USGS Science⌕ Search

SEARCH · USGS Science

Results for “Soil Dynamics and Earthquake Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,696 records · Page 33Linked to original sources
USGS2026

A novel drive-point multilevel system to investigate PFAS and other contaminants of global concern in the hyporheic zone of a wastewater effluent dominated stream

Contaminants found in treated wastewater discharged to streams, including pharmaceuticals and per- and polyfluoroalkyl substances (PFAS), are of global concern due to their deleterious effects on aquatic ecosystems and potential impacts to human health. Hyporheic zones have strong potential for contaminant attenuation. Assessing this potential requires collection of physical and biogeochemical data within the hyporheic zone. This study tested the applicability of a novel drive-point multilevel system (DP-MLS) for quantifying head profiles and characterizing contaminant concentrations in the hyporheic zone of a temperate region effluent dominated stream (EDS). DP-MLS, each with 4 ports, were installed in the stream bed at two sites, DS-1 and DS-2, 0.2 and 4.7 km downstream of the effluent outfall, respectively. Head profiles were measured and groundwater collected for analysis of pharmaceuticals and PFAS temporally over two years. The DP-MLS withstood rapid changes in stage, ice formation, and floating debris. Vertical hydraulic gradients (VHG) were generally upward but varied in magnitude indicating heterogeneity in hydraulic conductivity and variability in flow conditions. Upward VHG were also about 2X larger at DS-1 than at DS-2. Contaminant concentration profiles consistently showed penetration of pharmaceuticals and PFAS to 1 m below the bed at DS-2 while there was less penetration, lower groundwater concentrations, and more temporal variability in concentrations at DS-1. Integration of the physical and chemical data suggests weaker upwelling conditions at DS-2 are more easily reversed during periods of high stream stage, which could facilitate migration of wastewater contaminants into the bed. However, further studies incorporating other transport processes and reach scale dynamics are required to fully characterize these exchanges. Overall, this study demonstrates the efficacy of these novel DP-MLSs for characterization of the hyporheic zone and provides new insights into the occurrence, composition, and persistence of wastewater derived contaminants in the hyporheic zone of a well-studied EDS.

Iowa↗
USGS2025

Groundwater flowpath characteristics drive variability in per- and polyfluoroalkyl substances (PFAS) loading across a stream-wetland system

Groundwater-dependent ecosystems in areas with industrial land use are at risk of exposure to a PFAS chemicals. We investigated one such system with several known PFAS source areas, where high and low permeability sediments (glacial) coupled with groundwater-lake and groundwater/surface-water interactions created complex ‘source to seep’ dynamics. Using heat-tracing and chemical methods, numerous preferential groundwater discharge zones were identified and sampled across the upper Quashnet River stream-wetland system in Mashpee, MA, USA, downgradient of Joint Base Cape Cod (JBCC). Surface-water and groundwater samples were analyzed for 40 PFAS compounds between March and October 2022. Samples were collected from groundwater seeps identified as preferential discharge points (PDPs), wells upgradient of the stream-wetland system, contributing flow-through kettle lakes, and along Quashnet River surface-waters. PFAS from sampled waters contained perfluorinated carboxylates (PFPea, PFHxA, PFNA), perfluorinated sulfonates (PFBS, PFPeS, PFHxS, PFOS), fluorotelomer sulfonates (6:2, 8:2 FtS), and perfluoroalkyl sulfonamides (PFOSA). Samples from PDPs and wells had measured PFAS concentrations ranging from non-detect to 4677 ng/L ng/L (mean = 418 ng/L, std. = 709 ng/L), and a range of deuterium excess values (3.2 to 15.9 per mil) indicative of varying degrees of groundwater-lake interaction prior to groundwater flowpath emergence at PDPs. Correlations ( p < 0.01) between deuterium excess, %PFAS precursors, and terminal PFAS compounds highlighted potential precursor transformations associated with lake-groundwater exchange along flowpaths sourcing PDPs. However, some seepages had higher total PFAS concentrations (>1000 ng/L) than upgradient kettle lakes despite showing lake (evaporative) isotopic signatures, indicating the potential for groundwater flowpath convergence at wetland discharge zones and the influence of lakebed PFAS precursor reactions. Results from these synoptic surveys address gaps in the existing PFAS literature by demonstrating the importance of subsurface fate and transport on PFAS compound concentrations and mass loading in preferential groundwater discharge zones.

Massachusetts↗
USGS2025

Comparison of creek and bay influences on salt marsh sediment budget and deposition patterns

The resilience of salt marshes with low organic production depends on their effective capture and retention of mineral sediment from adjacent waters. Little prior work has directly compared mechanisms of sediment import from wave-influenced marsh boundaries against those of tidal creeks. We used simultaneous deployment of net-deposition tiles and oceanographic sensors to identify the timing and magnitude of sediment import/export to, and redistribution within, a marsh in south San Francisco Bay. As the marsh has both an eroding bay-exposed scarp and a prominent tidal creek, we investigated the mechanisms and magnitudes of sediment import from the marsh-bay versus the marsh-creek interface. The strong daily sea breezes of the summer season produced most of the wave-driven erosion of the marsh scarp and controlled suspended sediment concentrations; the winter season had weaker winds punctuated by a few storms. A large seasonal difference in suspended sediment concentrations influenced both flood and ebb sediment fluxes to the marsh and led to much higher rates of import in the summer. Both bay-side and creek-side processes were important to total marsh sediment budget. Bay-side sediment contributions were more variable in time due to the bay-influenced environment, and creek-side contributions were overall larger, reflecting the large proportion of the marsh fed by creek water. Sediment was redistributed throughout the system, with erosion near the bay-edge, accretion near the creek-edge and slow import to the marsh interior. The marsh was net importing sediment in the summer and exporting in the winter from different rates of these processes; on an annual scale, the marsh was net importing despite rapid lateral marsh loss. These findings emphasize that a positive sediment budget does not imply a stable marsh and that both creek- and edge-side dynamics are important for marsh sedimentation and geomorphic trajectories. Further, we expand understandings of non-storm and seasonal controls on marsh sedimentation.

California↗
USGS2026

A targeted approach for mapping groundwater discharge to surface water and fish thermal refuge in four Lake Ontario tributaries

The duration, magnitude, and frequency of heatwaves are predicted to increase in the coming decades, a combination that can reduce the survival of many fish species. Across the world, there is broad interest in identifying thermal refuge for heat-intolerant fish species and exploring opportunities to enhance or protect these areas. Because deeper groundwater maintains a relatively constant temperature, groundwater-influenced areas along streams can provide cool-water refuge for fish during periods of extreme heat. A targeted approach was developed for identifying existing cold-water zones and areas of substantial groundwater discharge in four high priority Lake Ontario tributaries. Our approach included: (1) predicting where groundwater discharge is most likely with a simple geospatial model and (2) using model predictions to select field sites for intensive high-resolution study, including ground-based mapping of groundwater features (springs, seeps, tributaries) as well as drone-based optical and thermal infrared surveys. Results from field sites were used to both verify model performance and map different types and aerial extents of thermal anomalies. Geospatial modelling successfully predicted regions of widespread groundwater upwelling, later verified and mapped by field and drone surveys. Comparison of model and field survey results further highlighted specific geospatial layers, such as soil/bedrock types and topographic wetness index, as being particularly useful for predicting groundwater influence on streams in the study area. In addition, a comparison of geospatial model results with a model of fish abundances along the studied streams showed significant positive correlations for many heat-intolerant fish species over a wide geographic area. The approach developed in this study can be applied to other watersheds to highlight areas of probable groundwater discharge and could be used by fishery and water resource managers to support cold-water fish habitat management decision-making and resource conservation.

New York↗
USGS2021

Remote sensing-based actual evapotranspiration assessment in a data-scarce area of Brazil: A case study of the Urucuia Aquifer System

The large groundwater reserves of the Urucuia Aquifer System (UAS) enabled agricultural development and economic growth in the western Bahia State, in northeastern Brazil. Over the last several years, concern has grown around the aquifer’s diminishing water levels, and water balance (WB) studies are in demand. Considering the lack of measured actual evapotranspiration (ET a ), a major component of the water cycle, this work uses the Operational Simplified Surface Energy Balance (SSEBop) model to estimate ET a , and compares it to basin-scale estimates from the Soil Moisture Accounting Procedure (SMAP) monthly model and from an annual WB closure method, based on gridded meteorological data and the Gravity Recovery and Climate Experiment (GRACE) product. Additionally, a comparative assessment of different versions of the SSEBop parameterization was performed. Moderate Resolution Imaging Spectroradiometer (MODIS) imagery was used to implement eight different versions of the SSEBop algorithm over the UAS between 2000 and 2013. SSEBop and SMAP ET a yielded similar seasonal patterns, with correlation coefficient (r) up to 0.65, mean difference (MD) of 0.8 mm/month and mean absolute difference (MAD) of 18.5 mm/month. Comparison of SSEBop annual ET a estimates to annual SMAP and WB closure estimates yielded low MD (12.1 and −7.3 mm/year, respectively) and MAD (82.5 and 82.8 mm/year, respectively), but also low r values (0.00 and 0.37, respectively). The comparison of the different SSEBop versions indicated the need to incorporate a calibration step of the aerodynamic heat resistance (r ah ) parameter. SSEBop results were also used for land cover and drought monitoring. Analysis indicates that agriculture, associated with an increasing trend of atmospheric evaporative demand, is responsible for the decrease in groundwater levels and streamflow in the studied time period.

Urucuia Aquifer System↗
USGS2025

Assessing nonpoint-source uranium pollution in an irrigated stream-aquifer system

Uranium (U) in rocks and soils of arid and semi-arid environments can be mobilized by irrigation and fertilization, posing environmental and health risks. Elevated U, along with selenium (Se) and nitrate (NO 3 ) co-constituents, necessitates careful monitoring and management. We developed a distributed-parameter numerical model to assess U pollution in an irrigated stream-aquifer system, applying it to a 552 km 2 region in Colorado's Lower Arkansas River Valley (LARV) over 14 years. A MODFLOW model, describing groundwater and stream flow, was coupled with an RT3D-OTIS model to portray reactive U transport. Calibration using the PESTPP-iES iterative ensemble smoother (iES) software indicated good agreement with observed U concentrations. The model revealed substantial and variable U levels across the LARV, highlighting potential hotspots and possible contributing factors, such as geological composition of the bedrock and near-surface shale and aquifer sediments derived from them, irrigation practices, and riparian landscape. U levels exceed the chronic standard (85th percentile = 30 μg/L, set by the US Environmental Protection Agency), which is the permissible regulatory threshold, in groundwater across 44 % of the region and along the river by an average factor of 2.9. Simulated average U concentrations in the non-riparian aquifer and river are 124 μg/L and 60 μg/L, respectively, compared with 112 μg/L and 62 μg/L for measured values. The average 85th percentile U concentration is 222 μg/L in the aquifer and 82 μg/L in the river. Average simulated U mass loading to the river is 0.17 kg/day per km, compared to an estimated 0.23 kg/day per km. Findings provide a baseline for comparing future simulated outcomes of alternative best management practices (BMPs) for U pollution mitigation and offer a methodology applicable to other irrigated regions.

Colorado↗
USGS2024

Reduced injection rates and shallower depths mitigated induced seismicity in Oklahoma

The proximity of wastewater disposal to the Precambrian basement is a critical factor influencing induced earthquake rates in the Central United States, but the impact of reducing injection depths has not been widely demonstrated. Beginning in 2015, state regulatory efforts in Oklahoma and Kansas mandated that wells injecting into the lower Arbuckle Group, a basal sedimentary unit, be backfilled with cement (i.e. “plugged back”) so that they inject into shallower formations. This plug back activity gives us a unique opportunity to investigate the relationship between injection depth and induced seismicity rate. To evaluate the impact that decreased injection rates and plug backs had on the seismicity rates, we create a suite of rate-state earthquake models. Observed seismicity rates are best fit when only lower Arbuckle volumes are considered, suggesting the lower Arbuckle injectors were primarily responsible for the seismicity and that plug backs were effective at isolating the injected volumes to shallower formations. Our models demonstrate that if these wells had not been plugged back, seismicity rates would be multiple times larger than they are today. We find that the combination of well plug backs and injection volume decreases can be effective strategies for reducing induced seismicity rates.

Oklahoma↗
USGS2024

3-D geological modeling for numerical flow simulation studies of gas hydrate reservoirs at the Kuparuk State 7-11-12 Pad in the Prudhoe Bay Unit on the Alaska North Slope

Accurate reservoir evaluation requires reliable three-dimensional (3-D) geological models. This study conducted 3-D geological modeling for numerical flow simulation of the B1 sand gas hydrate reservoir at the Kuparuk State 7-11-12 pad, Prudhoe Bay Unit, Alaska North Slope. The model integrates well logs, core, and seismic data to address spatial heterogeneity in geological structures and reservoir properties. Two modeling types were performed: structural framework modeling and petrophysical property modeling. For structural framework modeling, seismic data and well log markers were used to reproduce subsurface structures characterized by a normal fault system. A volume-based modeling algorithm and stair-step gridding were applied. The resulting 3-D model comprised 2,640,000 grid cells across 264 layers, including seven fault grids. For petrophysical property modeling, total porosity was initially modeled using sequential Gaussian simulation with collocated cokriging. To reproduce the upward coarsening of the B1 sand, upscaled log-derived total porosity and a 3-D trend depicting total porosity variation were used as primary and secondary data, respectively. Gas hydrate saturation distribution was modeled similarly, with secondary data from estimated porosity distribution and seismic-derived acoustic impedance map enhancing accuracy. Results indicate higher gas hydrate saturation in the upper part of the B1 sand and areas with higher acoustic impedance. Intrinsic permeability was modeled from the total porosity and clay-bound water volume, and effective permeability was derived from the gas hydrate saturation and intrinsic permeability distributions based on the “Tokyo model”. Effective permeability distributions were influenced by the total porosity, gas hydrate saturation, and intrinsic permeability. Within the same layer, higher gas hydrate saturation leads to decreased effective permeability. In total, 100 sets of multiple scenarios were prepared, providing input data for dynamic flow simulations to evaluate the effects of lateral heterogeneity in reservoir properties and the hydraulic characteristics of faults on production behavior for preassessment before the long-term production test.

Alaska↗
USGS2024

Potentially toxic elements in wild Agassiz’s desert tortoises: Tissue concentrations and association with disease

Background: Desert tortoise ( Gopherus agassizii ) populations have continued to decline due to infectious and other diseases, predation, and habitat alteration. The potential contribution of minerals and heavy metals to tortoise health and susceptibility to disease remains uncertain. Objective: The objective of this study was to evaluate the results of elemental analysis of trace minerals and macrominerals in scute keratin, kidney, and liver tissue from ill and dying desert tortoises salvaged for necropsy between 1993 and 2000. Methods: Salvaged tortoises were categorized by age (adult, juvenile), geographic location, and primary disease based on necropsy findings. A subset of tortoises that were injured or killed by vehicular trauma or predation but with no notable pathologic abnormalities were used as controls. A panel of 21 trace minerals and 6 macrominerals was analyzed in scute keratin, kidney, and liver tissue samples by inductively-coupled plasma spectrometry and atomic absorption spectrophotometry. Results: Necropsies were done on 46 tortoises, including 9 juveniles salvaged from 5 regions in the Colorado and Mojave deserts of California. Primary diseases were cutaneous dyskeratosis (n=9), infection/ inflammation (n=8), malnutrition (n=7), mycoplasmosis (n=5), and urolithiasis (n=3); 14 tortoises were classified as controls. Concentrations of elements differed significantly by tissue, age, desert region, and disease (P < 0.05). Tortoises with cutaneous dyskeratosis had significantly higher Se concentrations, primarily in keratin and liver, than tortoises with other diseases (P < 0.001). Juveniles were more likely than adults to have high Pb, Sn, and Zn levels (P < 0.05). All tortoises had detectable levels of more than one potentially toxic heavy metal, including As, Cd, Cr, Hg, Ni, Pb, Sn and V. Conclusions: Potentially toxic elements are frequently found in tissue from tortoises in desert regions of California, with significantly higher concentrations in diseased tortoises. Metal exposure from soils, mining, historic and ongoing military activities, and other human activities could increase susceptibility to disease in desert tortoises.

California↗
USGS2026

Towards a refined definition of “tidal influence” for the coastal wetland sciences

The astronomical tide relates to lunar (and to a lesser extent solar) influences on rising and falling water bodies, and is a key control of many coastal processes. However, tides manifest along coastal margins in different ways to muddle application beyond Sir Isaac Newton’s first descriptions. Here, we argue that tide, or specifically “tidal,” has not been adequately defined for the coastal wetland sciences to facilitate contemporary interdisciplinary distinction for rapidly changing coastlines and future climate adaptation planning. We provide a brief history of the tidal concept, and we describe tides in a diversity of uncommonly recognized marginal coastal environments. Common astronomical tide manifestations are described through hydrographic examples, then expanded to include those tidal environments exposed additionally to fluvial, meteorological (wind), or groundwater influences. Our expanded definition of “tidal” is intended to be a forward-looking construct as environments will inevitably change with sea-level rise, water extraction, and anthropogenic flow alteration. Our definition of wetland tidal influence, which we broaden, includes those “wetlands affected by astronomic water level fluctuations within coastally restricted environments causing frequent or infrequent surface inundation or groundwater tidal variation that affects the biogeochemistry of the soil (e.g., ion exchange capacity, oxygen state, mineralization processes)”. Astronomic water level fluctuations are often amplified or dampened by non-astronomical events, such as wind. Expanding the definition of what is considered tidal by the scientific community is critical for improved understanding of coastal wetland function and the suite of ecosystem services they provide people and society, including climate mitigation opportunity, management, and adaptation.

Wetlands↗
USGS2024

Vulnerability assessment of groundwater influenced ecosystems in the Northeastern United States

Groundwater-influenced ecosystems (GIEs) are increasingly vulnerable due to groundwater extraction, land-use practices, and climate change. These ecosystems receive groundwater inflow as a portion of their baseflow or water budget, which can maintain water levels, water temperature, and chemistry necessary to sustain the biodiversity that they support. In some systems (e.g., springs, seeps, fens), this connection with groundwater is central to the system’s integrity and persistence. Groundwater management decisions for human use often do not consider the ecological effects of those actions on GIEs. This disparity can be attributed, in part, to a lack of information regarding the physical relationships these systems have with the surrounding landscape and climate, which may influence the environmental conditions and associated biodiversity. We estimate the vulnerability of areas predicted to be highly suitable for the presence of GIEs based on watershed (U.S. Geological Survey Hydrologic Unit Code 12 watersheds: 24–100 km 2 ) and pixel (30 m × 30 m pixels) resolution in the Atlantic Highlands and Mixed Wood Plains EPA Level II Ecoregions in the northeastern United States. We represent vulnerability with variables describing adaptive capacity (topographic wetness index, hydric soil, physiographic diversity), exposure (climatic niche), and sensitivity (aquatic barriers, proportion urbanized or agriculture). Vulnerability scores indicate that ~26% of GIEs were within 30 m of areas with moderate vulnerability. Within these GIEs, climate exposure is an important contributor to vulnerability of 40% of the areas, followed by land use (19%, agriculture or urbanized). There are few areas predicted to be suitable for GIEs that are also predicted to be highly vulnerable, and of those, climate exposure is the most important contributor to their vulnerability. Persistence of GIEs in the northeastern United States may be challenged as changes in the amount and timing of precipitation and increasing air temperatures attributed to climate change affect the groundwater that sustains these systems.

Connecticut, Delaware, District of Columbia, Maine↗
USGS2025

Long-term trends in microseismicity during operational shut-ins at the Coso Geothermal Field, California

Pausing injection and production can lead to induced seismicity in a variety of settings, with some of the largest events occurring during these so-called shut-ins. In geothermal fields, shut-ins are periodically conducted for maintenance on wells and surface infrastructure, thereby offering recurring means of estimating stress changes in the subsurface that lead to increased seismicity rates. Here, we examine daily production and microseismicity data from the Coso Geothermal Field (CGF) in California between 1996 and 2010 to investigate the repetitive trends of operational shut-in microseismicity. Using 24 local seismic stations, we first analyze spatial and temporal trends of over 60,000 earthquakes with magnitudes between -0.4 to 3.8. We find that the northern region exhibits no significant seismicity changes during shut-ins, whereas the rest of the field experiences induced seismicity during almost every shut-in with an increasing intensity towards the southern and eastern portions of the field, highlighting local differences in stress within the CGF. Additionally, we cluster the seismicity using waveform cross-correlation, revealing several earthquake clusters primarily occurring during shut-in periods. These observations suggest that certain fracture and fault sections respond quicker to changes in pore pressure and poroelastic stresses within the geothermal system, possibly highlighting main fluid pathways.

California↗
USGS2023

Oligocene–Miocene northward growth of the Tibetan Plateau: Insights from intermontane basins in the West Qinling Belt, NW China

Growth of the Tibetan Plateau, Earth’s broadest and highest elevation collisional system, shapes orographic barriers, reorganizes drainage networks, and influences surface erosion and sediment delivery, whose changes in space and provenance feed back to intracontinental tectonic processes. Studies of interior basins within the northern Tibetan Plateau provide new sediment accumulation, provenance, paleodrainage, and deformation timing data that enable a reconstruction of the far-field tectono-geomorphic evolution of the rising Tibetan Plateau. Along the northern plateau margin, topographic growth in the West Qinling Belt is inferred to have initiated in the Eocene, nearly coeval with the India-Asia collision, as well as in the late Miocene. However, geological knowledge about the intervening period remains at present enigmatic, and the kinematics and dynamics are uncertain. This study presents a multidisciplinary data set from the intermontane Anhua-Huicheng Basin (AHB; Gansu Province, China) to fill this gap. Magnetostratigraphic dating, regional mapping, and sedimentological analysis imply that contractional deformation and thrust-top basin systems formed within the West Qinling Belt in the Oligocene (not later than ca. 24 Ma). A combination of observations including paleocurrent changes, detrital zircon U-Pb age variations, and appearance of growth strata along the Anhua-Huicheng Basin reveal the rapid uplift of the West Qinling Belt at ca. 15 Ma. Sedimentation in the intermontane basins ended after the late Miocene (ca. 8 Ma), when the region experienced intrabasinal deformation, uplift, and erosion with the establishment of an external drainage system. Since the late Miocene, the growth of the West Qinling Belt reached a climax with the lack of substantial contractional deformation in Cenozoic sequences heralding the onset of the modern kinematic regime and attainment of high elevation. Observed transitions in the tectonostratigraphy and paleodrainage define different phases of deformation and plateau-wide shifts in stress reorganization, which led to the northward growth and later lateral expansion of the Tibetan Plateau.

GSA Bulletin↗
USGS2024

Indications of preferential groundwater seepage feeding northern peatland pools

Groundwater seepage from underlying permeable glacial sedimentary structures, such as eskers, has been hypothesized to directly feed pools in northern peat bogs. These hypotheses directly contradict classical peat bog models for ombrogenous systems, wherein meteoric water is the sole water input to these systems. Variations in the underlying mineral sediment in contact with the peat imply that unrecognized hydrogeologic connectivity may exist with pools in northern peat bogs, particularly where high permeability materials are in contact with the peat. Seepage dynamics originating from these structural variations were investigated using a suite of thermal and hydrogeophysical methods deployed around pools in a peat bog of northeastern Maine, USA. Thermal characterization methods mapped anomalies that were confirmed as matrix seepage or preferential flow pathways (PFPs). Geochemical methods were employed at identified thermal anomalies to confirm upwelling of solute-rich groundwater. Conduits around pools were associated with surficial terminations of suspected peat pipes, based on the inference of pathways extending down into the peat, that focus flow through PFPs in the peat matrix. Discharge also occurred through the peat matrix adjacent to suspected pipe structures and matrix seepage rates were quantified using analysis of diurnal temperature signals recorded at multiple depths. Seepage rates, with a maximum of nearly 0.4 m/d, were measured at localized points around pools. Periods of synchronized temperatures paired with highly muted diurnal temperature signals, recorded in diurnal temperature with depth data, were interpreted qualitatively as activation of strong upward discharge rates through suspected peat pipes. These time periods correlated strongly with local precipitation events around the peatland. Ground-penetrating radar surveys revealed discontinuities in the low permeability glacio-marine clay at the mineral sediment-peat interface, interpreted to be regional glacial esker deposits, which were located beneath and around pools. Heat tracing, specific conductance contrasts, seepage rates, and trace metal concentrations all imply groundwater seepage originating from underlying permeable glacial esker deposits and directly sourcing pools. Preferential groundwater inputs into northern peat bogs may play a key role in developing and maintaining pool systems, with enhanced solute transport impacting peatland ecology, water resources, and carbon cycling.

Maine↗
USGS2025

Regional characterization of coal resources in the U.S. Gulf Coast

There is increasing interest in extracting critical minerals (CM), including rare earth elements (REE), from coals in the United States to address the overreliance on imported REE. The U.S. Gulf Coast and the Williston basins are the two major lignite-bearing basins within the country. Recent REE and CM studies of the lignite in these basins have indicated that the coals may be a viable source material for REE and CM extraction. To evaluate in-place coal as a potential source of REE and CM, the coal resources need to be quantified. This study presents the results of a regional analysis of the U.S. Gulf Coast lignite and bituminous coal resources that might be available as potential sources of REE and CM. The resource analysis used kriging methods to develop isopleth maps of cumulative coal thickness throughout the region using data from 31,181 drill holes and other data points. The estimated total coal resource in the Gulf Coast is about 83 billion metric tons in the upper 90 m (~ 300 ft) of the subsurface. Texas accounted for 40 percent (32 billion metric tons) of the total resource, followed by Mississippi (24 %, 20 billion metric tons), Louisiana (14 %, 12 billion metric tons), Tennessee (10 %, 8.5 billion metric tons), and Arkansas (6 %, 5.1 billion metric tons). The remaining states each accounted for less than 5 percent of the total resource. Georgia had the smallest resource estimated at 7 million metric tons. Here we report the first known state-wide lignite resource estimates for Georgia, Kentucky (820 million metric tons), and Missouri (1,800 million metric tons). A comparison of the results of this study with those of previous Gulf Coast and Williston Basin resource studies is difficult because each study used different data sources, assessment methodologies, overburden depths, and qualifying coal thicknesses. Coal-power electric generation has sharply decreased in past decades and mining of these coals for CM and REE could provide additional co-products such as activated carbon and other uses such as fertilizer (soil enhancer).

EarthArXiv↗
USGS2025

Migration of seismicity from the mantle to the upper crust beneath Harrat Lunayyir volcanic field, Saudi Arabia

Harrat Lunayyir is a volcanic field in Saudi Arabia that experienced a Mw~5.4 earthquake driven by an upper-crustal dike intrusion in May 2009. This volcanic field has exhibited numerous forms of volcanic seismicity both prior to and since the 2009 dike intrusion. Significantly, earthquakes within the lithospheric mantle and, rarely, the lower crust are present in the two-decade long seismicity catalog of Harrat Lunayyir. Here we analyze 24 years of volcanic seismicity at Harrat Lunayyir from 1998 to 2022. We find that: 1) precursory seismicity began at least eight years prior to the 2009 event, with a particularly notable seismic episode one year prior; 2) lithospheric mantle seismicity is highly localized in space and in time, largely occurring in discrete sequences lasting on the order of a few hours to a few days; 3) one seismic sequence clearly migrates upward from the lithospheric mantle to the upper crust, including seismicity within the nominally ductile lower crust; 4) crustal seismicity has been slowly declining over time; and 5) lithospheric-mantle seismicity does not show any apparent decline with time. From these observations we infer that the seismicity is driven by magmatic fluids or volatiles, and seismic monitoring of this volcanic field should continue into the future.

Harrat Lunayyir volcanic field↗
USGS2025

3D viscoelastic models of slip-deficit rate along the Cascadia subduction zone

Interseismic deformation in the Pacific Northwest is constrained by the horizontal crustal velocity field derived from the Global Positioning System (GPS) in addition to vertical rates derived from GPS, leveling, and tide gauge measurements. Such measurements were folded in to deformation models of fault slip rates as part of the 2023 National Seismic Hazard Model (NSHM) update. Here I build upon one of the contributing models, the viscoelastic earthquake-cycle model of Pollitz [2022]. This model permits inclusion of effects of time-dependent viscoelastic relaxation within earthquake cycles (i.e., ‘ghost transients’) and laterally variable elastic and/or ductile material properties. I lever-age these capabilities to incorporate the Cascadia megathrust into Western U.S.-wide deformation models in which crustal fault slip rates are estimated simultaneously with slip deficit rates along the interplate boundary between the descending Juan de Fuca plate and North American plate. This effort includes construction of a margin-wide model of viscoelastic structure founded on the Slab 2.0 model and probes different models of the ductile properties of the surrounding oceanic asthenosphere, continental lower crust, and mantle asthenosphere. This results in new estimates of the distribution of slip deficit rate along the ∼ 1000 km long margin, highlights the importance of correcting for glacial-isostatic adjustment effects, and permits assessment of sensitivity of results to assumed ductile properties.

California, Oregon, Washington↗
USGS2026

Color-Shaded Relief Bathymetry of Lake Chelan, Washington

In 2023, the U.S. Geological Survey (USGS) completed a 3-week field operation in Lake Chelan, Washington, the third deepest lake in the conterminous United States, to acquire sediment cores, high-resolution bathymetry data, and chirp sub-bottom profiles. The high-resolution bathymetry displayed in this map publication was collected using a Norbit Winghead i67-curved array multibeam system; raw data were cleaned and gridded (3 by 3 meters [m]) in the Teledyne CARIS software. In some locations where the slopes of Lake Chelan are near-vertical, multibeam returns were sparse, resulting in artifacts resembling holes that appear as grey dots within the color-shaded bathymetric relief. Although the 2023 bathymetric mapping of Lake Chelan resulted in similar morphometric characteristics to previous hydrographic campaigns (table 1; Kendra and Singleton, 1987; Pelletier and others, 1989), these new data provide a much more detailed understanding of the two physiographic basins that comprise Lake Chelan: the deeper (as deep as 445.8 m [fig. 1]; previously reported as 453 m) and narrower (1–2 kilometers [km] wide) Lucerne Basin to the north, and the shallower (as deep as 127.8 m [fig. 1]), and wider (2–3 km wide) Wapato Basin to the south. With this detailed imaging of Lake Chelan, we find pervasive morphological evidence of slope failure and mass-transport deposits (MTDs) in at least 89 locations within the lake and 63 subaqueous deltas (fig. 2). The deeper Lucerne Basin is dominated by steep slopes and numerous subaqueous deltas fed by steep fluvial catchments, whereas the Wapato Basin contains numerous landslide scarps, scars, and debris aprons along the more gently sloping lake margins, and abundant relict kettle structures from the Pleistocene deglaciation. Lake Chelan’s geomorphic, geophysical, and sediment data contain important records of glacial retreat and advance, regional volcanic eruptions, and earthquakes that generate ground motions severe enough to induce landslides recorded in the sediment as MTDs. The epicenter of the 1872 Washington State Earthquake (M 6.5–7.2; Bakun and others, 2002; Brocher and others, 2017; Sherrod and others, 2021) is along the Spencer Canyon Fault, near the southern end of Lake Chelan. Shaking from this earthquake was strong enough to affect local aquifers, induce liquefaction of unconsolidated sediments, produce large seiches (Brocher and others, 2018), and likely cause landslides within Lake Chelan.

Washington↗