USGS Science⌕ Search

SEARCH · USGS Science

Results for “Photogrammetric Engineering and Remote Sensing (PE&RS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,691 records · Page 33Linked to original sources
USGS2025

A geospatial analysis of water-quality threats from orphan wells in principal and secondary aquifers of the United States

Throughout the history of oil and gas production in the United States, millions of wells have been drilled for exploration and energy production. Hundreds of thousands of unplugged wells are no longer actively producing and are currently under orphan status, with no responsible party obligated for plugging. Orphan wells can pose threats to water resources by providing pathways for contaminants such as hydrocarbons and brines to migrate into water-supply aquifers. In this study, we investigate the potential threats to groundwater resources posed by orphan wells at the national scale. Water-quality data is extremely sparse in relation to orphan wells nationally and may not be suitable for identifying contamination from oil and gas development. We used geospatial and statistical methods to evaluate which principal and secondary aquifer systems may be most susceptible to contamination from orphan wells. Analysis involved three sets of susceptibility factors including: 1) factors related to the number and density of orphan wells; 2) factors that can threaten well integrity and contribute to transport of contaminants; and 3) factors related to groundwater withdrawal rates and the affected populations/communities in the event of water quality disturbances. From a dataset of 117,672 documented orphan wells, 64,203 fall within a principal aquifer system, while the remainder fall within a secondary aquifer system. By assessing the combination of well integrity and hydrogeologic factors within these aquifer systems, five groupings of principal aquifers were identified, where groups ranged from aquifer systems with high numbers of orphan wells, multiple well integrity threats and high withdrawals, to aquifers with a relatively low number of orphan wells, limited well integrity threats and minimal water use. Three regions of the country emerge containing aquifers with higher susceptibility to contamination from orphan oil and gas wells. These regions include 1) The Appalachian Basin (including the Pennsylvanian Aquifer System), 2) The Gulf Coast Aquifers (including the Coastal Lowlands Aquifer system) and 3) The California Aquifers (including the California Coastal Basin Aquifer system). This work is the first multivariate geospatial investigation of orphan wells and groundwater resources on a national scale, and sheds light on which aquifers are most susceptible to groundwater contamination from orphan wells.

Science of the Total Environment↗
USGS2025

Timing of hydrothermal alteration and Au-Sb-W mineralization, Stibnite-Yellow Pine district, Idaho

The Stibnite-Yellow Pine district of central Idaho was mined from the early 1900s until the 1990s, extracting gold, antimony, tungsten, and mercury from veins and disseminated and replacement ores in mountainous terrain along the headwaters of the Salmon River. Mining during the two World Wars supplied critical antimony and tungsten to the war efforts. Recent exploration has delineated mineral resources of over 187 metric tons Au, 274 metric tons Ag, and 93,000 metric tons Sb. Mineralization is hosted in Cretaceous Idaho batholith granitic rocks and a sequence of Neoproterozoic to Paleozoic metasedimentary strata of carbonate and siliciclastic compositions. Historical studies outlined some of the complex paragenesis but debated the absolute age of mineralization. New petrographic and geochronologic work documents a sequence of five hydrothermal events in the Stibnite-Yellow Pine district. Event 1 is related to Cretaceous magmatic and hydrothermal activity and includes events ranging in age from 86 to 75 Ma, including sparse quartz-molybdenite veins dated at 86 Ma. Disseminated gold mineralization of event 2 is associated with sericitic alteration and sulfidation of igneous biotite and replacement of plagioclase by potassium feldspar, largely in granodiorite. Gold is present in zoned arsenian pyrite in both disseminated ores and in crosscutting carbonate-quartz veins containing pyrite and arsenopyrite. The large Yellow Pine deposit, localized at a dilatant bend in the Meadow Creek fault, hosts such disseminated and vein gold. Event 2 is interpreted as the major gold-forming event; 40 Ar/ 39 Ar ages of sericite and potassium feldspar alteration range, respectively, from 70 to 59 and 66 to 56 Ma. The long span is interpreted to reflect the age of gold mineralization and local overprinting by event 3. A narrower range from 66 to 61 Ma is interpreted to date the peak of gold mineralization and alteration. Event 3, tungsten mineralization with scheelite, is texturally later than event 2 gold and localized along the Meadow Creek structure. Event 3 scheelite has been dated by isotope dilution-thermal ionization mass spectrometry (ID-TIMS) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) U-Pb methods at 57 Ma. Event 4, best developed in the West End area, includes gold-silver–bearing quartz-carbonate-pyrite veins and breccias with epithermal textures and potassium feldspar alteration envelopes. Adularia from event 4 yields 40 Ar/ 39 Ar plateau ages of 52 to 51 Ma. Event 5 antimony and mercury mineralization consists of stibnite veins and breccia cements at the Yellow Pine and Hangar Flat deposits as well as cinnabar veins and replacements at the peripheral Fern and Hermes deposits; it is constrained by an LA-ICP-MS U-Pb date on scheelite (ca. 47 Ma) intergrown with stibnite. Minor propylitic and argillic alteration is evident in 47 Ma igneous dikes, which do not contain economic mineralization. The Au-Sb-W ores in the Stibnite-Yellow Pine mining district formed over an extended time period from about 70 to 45 Ma in multiple pulses that were localized along the Meadow Creek fault zone. Each event corresponds to episodes of magmatism and/or hydrothermal activity in the region. Insignificant event 1 skarn and molybdenum mineralization is similar in age to the Thompson Creek porphyry molybdenum deposit in central Idaho. Event 2 gold mineralization occurred during a magmatic gap in central Idaho but was synchronous with magmatism in the Bitterroot lobe further north; event 2 is similar in age to orogenic gold-arsenic mineralization at the Beartrack mine in eastern Idaho. Event 3 scheelite mineralization coincides with tungsten mineralization at the Quartz Creek deposit, late magmatism in the Bitterroot lobe, and rapid exhumation of the Atlanta lobe of the Idaho batholith. Event 4 gold mineralization is coincident with the onset of regional Challis magmatism and extension. Event 5 antimony and mercury mineralization is time-equivalent to epithermal gold mineralization in the nearby Thunder Mountain volcanic field and the peak of Challis magmatism.

Idaho↗
USGS1976

Geology and mineral deposits of the Needle Mountains District, Southwestern Colorado

The Needle Mountains district is set in highly fractured Precambrian granitic rocks that have intruded and metamorphosed older Precambrian metasedimentary rocks. The Precambrian rocks are overlain by outliers of Paleozoic strata and intruded by a late Tertiary stock. Past mineral production reportedly was limited to silver and gold ores presumably taken from small fissure veins. Although the economic potential of the district has not been adequately explored, some evidence indicates potential for base metal deposits.

Colorado↗
USGS2024

Characterization of the water resources of the Pamunkey River watershed in Virginia—A review of water science, management, and traditional ecological knowledge

In central Virginia, the Pamunkey Indian Tribe and Reservation are facing increasingly complex water resource issues related to quantity and quality. Documentation of surface-water, groundwater, water quality, land subsidence, sea-level rise, and river ecology issues in the Pamunkey River watershed and incorporation of traditional ecological knowledge into these research topics may improve understanding of the water resources broadly. This report summarizes the relevant traditional ecological knowledge and scientific literature to elucidate gaps in the total combined knowledge of a suite of water science topics concerning the Pamunkey River watershed. This suite of water science topics includes some of the issues that the Pamunkey Indian Tribe and Reservation are facing within the watershed: fragmentation of streams and management of streamflow, flooding, degrading water quality, groundwater extraction, relative sea-level rise, rapid changes in ecosystems, loss of ecological and biological diversity, and climate change. Gaps in total combined knowledge are pervasive throughout each of these water resource topics. Identifying these knowledge gaps can help inform future research and management strategies.

Virginia↗
USGS2024

Using surficial geologic maps, vegetation, and monitoring to address erosion impacts from grazing in Channel Islands National Park, California

Employing a map-unit classification scheme based on geomorphic process and age, the U.S. Geological Survey (USGS) mapped Quaternary surficial deposits of the five islands comprising Channel Islands National Park (CHIS), California, as no such maps previously existed. Mapping was motivated through an agreement with the National Park Service (NPS) to aid natural resource assessments, including post-grazing disturbance recovery and identification of mass wasting and tectonic hazards. The resulting detailed (1:12,000 scale) maps portray areas of upland erosional transport processes and alluvial, fluvial, eolian, beach, marine terrace, mass wasting, and mixed depositional processes at a scale commensurate with the process signal on the landscape. Detailed, GPS-located observations of sedimentology, pedogenic development, landscape position, and geomorphology constrain map unit identification. In addition, map-unit boundary delineation was determined in a GIS using a variety of high-resolution (sub-meter) aerial imagery and lidar-based DEMs complemented by derivative raster products. The GIS geodatabase schema used is GeMS compliant. Resolvable map-unit widths are as small as 10-15 meter. Locational accuracy of unit boundaries is estimated to be as low as 10 m or better. Detailed mapping is at a scale allowing determination of geomorphic transport processes operating on the landscape and conveys geologic information to land managers at a resolution commensurate with park resources. Map unit ages are constrained by relative soil chronostratigraphy, vertebrate and invertebrate fossils, and materials collected for dating control using radiogenic, luminescence, and cosmogenic radionuclide techniques. Associated topical studies examined connections between geology, surface water, and vegetation distribution and restoration.

California↗
USGS2025

Three-dimensional seismic velocity models for the San Francisco Bay region, California from joint body-wave and surface-wave tomography validated by waveform simulation

A high-resolution seismic velocity model for both P and S waves is essential for the San Francisco Bay (SFB) region to accurately simulate earthquake ground motions and assess seismic hazards in this high-risk region. We present new three-dimensional P-wave and S-wave velocity (Vp and Vs) models of the SFB region developed using joint tomographic inversion with a rich set of earthquake and active-source body-wave data and ambient-noise surface-wave data. We designed a dynamic balance strategy to effectively balance the contributions of body-wave and surface-wave data during each iteration of the inversion. Owing to the complementary resolution of body-wave and surface-wave data, our new models are significantly improved compared to previous tomographic models. Major geologic features in the SFB region, including low-velocity basins, high-velocity Franciscan Complex, granite, and gabbro rocks, and across-fault velocity contrasts, are imaged in our Vp and Vs models. Compared to the geology-based U.S. Geological Survey velocity model, our new model has better defined structures for some important areas that are of great concern for seismic hazard assessment, such as the Sacramento-San Joaquin Delta, and the 2014 magnitude 6.0 South Napa earthquake area. We validated our model by simulating waveforms for a set of moderate-magnitude earthquakes. The good performance of our model in waveform simulation indicates its potential for improving ground motion simulation and seismic hazard assessment in the SFB region.

California↗
USGS2026

Evaluation of nutrient, alkalinity, and acid-neutralizing capacity stabilities in water samples analyzed by the U.S. Geological Survey National Water Quality Laboratory, 2023–24

The U.S. Geological Survey evaluated the stability of water-sample chemical analysis of nutrient, alkalinity, and acid-neutralizing capacity constituents with respect to the duration between sample collection and laboratory analysis, also known as the sample holding time. A study began in the spring of 2023 to evaluate the sample stability, between 2 and 180 days after sample collection, of the chemical properties and chemical constituents of alkalinity as calcium carbonate, filtered; acid-neutralizing capacity as calcium carbonate, unfiltered; total ammonia as nitrogen, filtered; total ammonia plus organic nitrogen as nitrogen, filtered and unfiltered; nitrite as nitrogen, filtered; nitrate plus nitrite as nitrogen, filtered; total nitrogen, filtered and unfiltered; orthophosphate as phosphorous, filtered; and total phosphorus as phosphorus (filtered and unfiltered) in water. Both surface water and groundwater matrices were represented. Sample instability varied by observed property and matrix; therefore, providing general guidance for sample holding time is not possible based on matrices alone. No correlations between field measurements of sample characteristics and sample instability were observed. Although observations for some properties indicate sample stability that exceeds the recognized U.S. Geological Survey National Water Quality Laboratory method holding times, this is not necessarily the case for matrices and seasonal characteristics that were not investigated. Based on the limited number of six sample sources used in this study, some patterns emerge for the 12 observed properties studied. Five observed properties generally indicate stability for as many as 180 days after sampling (total nitrogen as nitrogen, both filtered and unfiltered; orthophosphate as phosphorus, filtered; and phosphorus as phosphorus, both filtered and unfiltered). Other observed properties indicate stability for as many as 180 days for some matrices, but not for others. Finally, some observed properties indicate instability well before 180 days.

Scientific Investigations Report↗
USGS2025

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York and near coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York and near coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater inundation or groundwater emergence flooding. The latter refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As part of a comprehensive study of compound flood hazards in the near coastal areas surrounding Long Island and Long Island Sound, a spatial analysis was completed, in cooperation with the Environmental Protection Agency’s Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 900-meter by 900-meter (approximately 3,000-feet by 3,000-feet) grid cells, for the purposes of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard rank was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percent of area within each cell with slow infiltrating soils. A higher sea level position scenario was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard rank was reviewed in concert with the National Land Cover Data Base to identify developed areas and associated infrastructure that may be at risk to groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface water bodies are not likely to be exposed to groundwater emergence flooding. For Long Island, under a scenario with higher sea level position, a greater groundwater emergence flood hazard is calculated in some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea level condition and a higher sea level position scenario.

EarthArXiv↗
USGS2026

Cajon Pass and the southern San Andreas Fault System: Earthquake cycle stress accumulation and present-day loading

With over a century since the last major rupture affecting the wider Los Angeles region, tectonic stress has steadily built along the southern San Andreas and San Jacinto fault systems, raising concerns of an imminent large earthquake. Cajon Pass, located at the junction of these faults, represents a critical site for potential through-going ruptures in Southern California. We constructed new 4D earthquake cycle simulations using a 1000-year paleoseismic rupture history of the San Andreas Fault System (SAFS) to assess spatial and temporal variations in stress. A semi-analytic Fourier transform model was used to compute stress from 3D dislocations in an elastic plate overlying a Maxwell viscoelastic half-space, assuming a complete coseismic reset of resolved shear stress on ruptured elements. Results show highest stress accumulation north of Cajon Pass (∼1.8 MPa/100 years) due to greater slip rates, and lower rates south of Cajon Pass (∼1.0–1.5 MPa/100 years). By 2025, Coulomb stress is estimated at 2.8 MPa on the Mojave South (MOS) segment, 1.8 MPa on the North San Bernardino (NSB1) segment and 3.6 MPa on the San Jacinto Bernardino (SJB) segment. Segments accumulate stresses with characteristic ranges of pre-event stress interpreted as failure thresholds: 1.2–2.7 MPa for MOS, 0.4–1.6 MPa for NSB1, and 1.2–2.9 MPa for SJB. When the stress disparity between segments SJB and MOS narrows, the faults appear to rupture jointly, suggesting that stress levels may control how Cajon Pass acts as an earthquake gate. These results may inform seismic hazard assessments by linking stress evolution to fault interactions.

California↗
USGS2026

Hydrologic variability drives environmental and geospatial relationships in Smallmouth Bass (Micropterus dolomieu) distribution

Hydrologic variation is a primary driver of stream ecosystems. Changing hydrology can lead to assemblage shifts and alterations in suitable habitat for freshwater species. As climate change is predicted to alter flow patterns in addition to increasing water temperatures, insight into relationships between species occupancy, hydrology, and temperature is critical for understanding current and future distributions. We examined how hydrologic variability, temperature, and other environmental variables interact to influence Micropterus dolomieu (Smallmouth Bass) occurrence. We used Spatial Stream Network models, allowing for the incorporation of spatial autocorrelation along streams' unique dendritic network, to examine Smallmouth Bass occupancy across a range of hydrologic variation in the Ozark-Ouachita Interior Highlands, USA. Hydrologic variation was the main driver of Smallmouth Bass occurrence, with occurrence more likely in groundwater streams with low hydrologic variation and high flow permanence. For groundwater streams, occurrence was positively associated with summer stream temperature and negatively associated with annual stream temperature. As variation increased, more variables showed significant relationships with occurrence. Distance metrics were important for all models, however as hydrologic disturbance increased, flow connected distance played a lesser role and stream distance played a greater role. Hydrologic variability was the overarching determinant of Smallmouth Bass occurrence and strongly influenced the predictive importance of environmental variables and geospatial relationships. Greater hydrologic variability resulted in stronger statistical relationships between occurrence and environmental variables and an increased importance of system connectivity. As climate change alters hydrologic processes and streams become more variable, understanding and accounting for these shifting relationships is essential.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS1976

An environmental assessment of impacts of coal development on the water resources of the Yampa River basin, Colorado and Wyoming; Phase I work plan

Coal resources of the western United States are being developed at ever-increasing rates, causing concerns of the effects of mining and associated activities on the environment. The Yampa River basin in northwestern Colorado and south-central Wyoming is undergoing economic development of its coal, oil and gas, and uranium resources. The Yampa River basin assessment is a 21-year program of the U.S. Geological Survey. It is designed primarily to assess the availability and quality of the basin's water resources. The basin assessment also will evaluate potential environmental and selected socioeconomic impacts of energy-resource development plans proposed by mining and power companies. This report serves as a project work plan for the basin assessment's first-phase work activities. Economic development in the Yampa River basin will result in higher levels of residuals (noneconomic byproducts) being discharged into the environment. Residuals-management encompasses the technological and economic interrelationships that should be considered in order to comply with Federal and State environmental-control regulations regarding air quality, water quality, and disposal of solid wastes. The basin assessment, the first phase that is described by this report, is designed to provide Federal, State, and local decision-makers with the basic environmental information needed to formulate and to evaluate policies for the development of energy resources. The techniques applied and conclusions reached in the Yampa River basin assessment should aid similar studies of other energy-rich basins in the western United States.

Colorado, Wyoming↗
USGS2024

Relatively stable pressure effects and time-increasing thermal contraction control Heber geothermal field deformation

Due to geological complexities and observational gaps, it is challenging to identify the governing physical processes of geothermal field deformation including ground subsidence and earthquakes. In the west and east regions of the Heber Geothermal Field (HGF), decade-long subsidence was occurring despite injection of heat-depleted brines, along with transient reversals between uplift and subsidence. These observed phenomena contradict current knowledge that injection leads to surface uplift. Here we show that high-yield production wells at the HGF center siphon fluid from surrounding regions, which can cause subsidence at low-rate injection locations. Moreover, the thermal contraction effect by cooling increases with time and eventually overwhelms the pressure effects of pressure fluctuation and poroelastic responses, which keep relatively stable during geothermal operations. The observed subsidence anomalies result from the siphoning effect and thermal contraction. We further demonstrate that thermal contraction dominates long-term trends of surface displacement and seismicity growth, while pressure effects drive near-instantaneous changes.

California↗
USGS2024

A history of cryohydrogeology modeling and recent advancements through the integration of solute transport

Groundwater flow systems and permafrost are interrelated because permafrost thaw enhances permeability, while groundwater flow can advect heat and accelerate permafrost thaw (McKenzie et al. 2021). Given amplified climate change in cold regions, there is renewed interest in ‘cryohydrogeology’, the study of groundwater in cold regions. Many data-driven studies have shown that permafrost thaw is leading to activated aquifers and increased baseflow across the pan-Arctic region (e.g. Walvoord and Striegl 2007, Evans et al. 2020). Empirical evidence of a subsurface ‘replumbing’ (Walvoord and Kurylyk 2016) in permafrost regions raises questions about the fate of sequestered contaminants in the North (Langer et al. 2023). We will discuss the history of and emerging opportunities in cryohydrogeological modeling, with a focus on recent contaminant transport modeling.

Conference Paper↗
USGS2026

Guidelines for producing integrated 210Pb and 14C age-models

Accurate reconstructions of past environmental changes are crucial in paleoecological research and require reliable chronologies of sedimentary archives. Establishing robust age-models and obtaining the most appropriate proxies for analysis is a complex scientific endeavor, requiring extensive resources and collaboration among specialists, including radiochronologists. Radiometric dating methods, such as 210 Pb and radiocarbon ( 14 C), are frequently employed to establish chronologies in aquatic sedimentary deposits and peat bogs. In this study, we review key aspects of sampling, analysis, and the principles underlying 210 Pb and 14 C age-models, focusing on methods for developing robust joint chronologies for paleoenvironmental research. Drawing largely from the authors' experiences and group discussions during and after a scientific workshop in 2022, we discuss important considerations for site selection, sampling strategies, and radiometric dating to construct integrated 210 Pb and 14 C age-models. Using expert consensus, this group – called Paleostats – aims to provide a set of best practices for other geochronologists with this methods paper. Among our conclusions, we emphasize the importance of accounting for site-specific factors such as prior information on sedimentation rates to establish appropriate sampling and analytical strategies. The use of appropriate coring devices can minimize disturbance to sediments and ensure the core surface remains intact and preserved until sectioning. Where excess 210 Pb is expected, sectioning at intervals of ≤1 cm provides an adequate sampling resolution for 210 Pb dating. Exceptions are possible, allowing for ~2–3 cm sections in areas with confirmed high sedimentation rates (e.g., > 1 cm yr −1 ). Recovering deeper core sections for 14 C dating with sufficient overlap allows for accounting errors in depth estimates made in the field. Special attention is advised during time intervals where validation proxies, such as the human-made radionuclides 137 Cs or post-bomb 14 C, are expected, and to determine the depth of secular equilibrium between 210 Pb and 226 Ra. Radiocarbon analyses are commonly performed by accelerator mass spectrometry, and age models are constructed mainly using Bayesian statistics with Markov Chain Monte Carlo techniques (e.g., Bacon ). A Bayesian approach ( Plum ) is now available for producing 210 Pb age-models, which infers the 210 Pb ex flux, eliminates the need for selecting an equilibrium depth, and allows dating cores with incomplete 210 Pb ex inventory. Plum offers improved chronologies by integrating raw 210 Pb and 14 C data, and these age-models can be enriched with other dating methodologies, such as identifying tephras and other well-recorded historical events. Harmonized reporting would contribute to making radiometric age-models reproducible, which would benefit from an international effort. Using 210 Pb and 14 C to produce integrated age-models may yield better insights into the interplay between natural and recent anthropogenic forcings on ecosystems. This can enhance our understanding of environmental processes and their impacts on climate change, ultimately supporting science-based assessments and decisions.

Earth-Science Reviews↗
USGS2024

Surficial geology and Quaternary fault map of the Las Vegas Valley, Clark County, Nevada

The Surficial Geology and Quaternary Fault Map of the Las Vegas Valley, Clark County, Nevada is a 1:50,000-scale compilation of published 1:24,000-scale geologic maps integrated with new field and desktop mapping. This geologic map compilation and GIS database are part of a broader study on the Quaternary faults in the Las Vegas Valley, the results of which are summarized in this report. The map compilation utilized a variety of digital base maps to evaluate the characteristics of surficial deposits and Quaternary fault scarps including lidar data in undeveloped parts of the valley and orthorectified historical aerial photos in the urbanized center of the valley. The map distinguishes twenty surficial map units including alluvial-fan and ephemeral-wash deposits, groundwater discharge deposits of the Las Vegas Formation, and alluvium deposits of Las Vegas Wash. Quaternary faults include the Quaternary Las Vegas Valley fault system in the center of the valley and the Frenchman Mountain fault system along the eastern margin. All Quaternary fault traces in the valley were evaluated, and the previously published fault mapping was modified as needed. The new mapping and uniform correlation of surficial deposits displaced by Quaternary faults yields a consistent valley-wide characterization of the recency of fault activity. The map and GIS database include a Quaternary geochronology compilation of 119 previously published surficial deposit ages of various types, 35 new luminescence ages, and 3 new radiocarbon ages. The new age data further bracket the ages of the Las Vegas basin Quaternary stratigraphy and provide new constraints on the timing of Quaternary fault activity.

Nevada↗
USGS2026

Creation of aerial camera system boresight installations in Bangor, Maine; Monroe, Louisiana; and Bassville Park, Florida

Aerial camera systems rely on boresights for defining internal and external metrics. The U.S. Fish and Wildlife Service’s Migratory Bird Surveys Branch required boresights to calibrate their camera systems for creating georeferenced imagery that can then be used in geographic information systems. The U.S. Geological Survey created high-accuracy boresight installations in Bangor, Maine, in July 2024; Monroe, Louisiana, in September 2024; and Bassville Park, Florida, in January 2025 to provide this metric-defining capacity to the U.S. Fish and Wildlife Service. This U.S. Geological Survey Data Report details the methods and results of the boresight installation process and provides camera operators with the data needed to use each of the installations.

Florida, Louisiana, Maine↗
USGS2025

High-pass corner frequency selection and review tool for use in ground-motion processing

Raw seismological waveform data contain noise from the instrument’s surroundings and the instrument itself that can dominate recordings at low and high frequencies. To use these data in ground‐motion modeling, the effects of noise on the signals must be reduced and the signals’ usable frequency range identified. We present automated procedures to efficiently reduce low‐frequency noise that are implemented in the software package gmprocess. These procedures check for, and as needed remove, low‐frequency artifacts in the displacement record using polynomial fits, which can be used in combination with existing signal‐to‐noise ratio (SNR)‐based corner‐frequency selection procedures. The automated selections are then efficiently verified and refined using a graphical user interface (GUI) that plots relevant ground‐motion time series and spectra and tracks modifications to signal processing parameters. We demonstrate these procedures using recordings from the 2020 M 5.1 Sparta, North Carolina, and the 2013 M 4.7 southern Ontario earthquakes. Data processed with the SNR‐only and polynomial criteria for these events contain displacement artifacts in 37% and 23% of processed traces, respectively. Records with remaining artifacts are corrected manually using the GUI. These processing steps illustrate the workflow for efficient data processing with quality control.

Seismological Research Letters↗
USGS2025

U.S. Geological Survey science strategy to address white-nose syndrome and bat health in 2025–2029

Since its discovery in 2006, the fungal disease known as white-nose syndrome (WNS) has killed millions of bats. Of the 47 bat species native to the conterminous United States, Alaska, Hawaii, and Canada, 12 have been affected by WNS, including 3 endangered species and 1 proposed endangered species. WNS has also been detected in 40 States and 9 Canadian Provinces. U.S. Geological Survey (USGS) scientists have been critical in identifying the causal fungus for WNS ( Pseudogymnoascus destructans [Pd]), characterizing the effects of WNS, and tracking the spread of Pd in many bat populations in North America. The mission of the USGS WNS and Bat Health Science Team is to deliver integrated science in order to build resiliency into free-ranging bat populations through more effective WNS management, build capacity for bat health science, and enhance bat health information sharing across USGS science centers and cooperative research units as well as with stakeholders. The USGS can play an important role in supporting regional and national capacity building by providing resources and guidance to local, State, and Tribal management entities and by providing tools to enhance disease management. The USGS Ecosystems Mission Area’s Biological Threats and Invasive Species Research Program is the lead Federal program for free-ranging wildlife disease research and surveillance. As of 2024, guided by the science priorities set by the WNS Steering Committee, USGS scientists are engaged in a nationwide response to WNS. This work is done in close coordination with our partners at the U.S. Fish and Wildlife Service, National Park Service, Bureau of Land Management, U.S. Forest Service of the U.S. Department of Agriculture, U.S. Department of Defense, as well as State and Tribal agencies. In addition to conducting WNS research, the USGS is mapping the spread of WNS and coordinating the North American Bat Monitoring Program (NABat) to understand how WNS and other stressors affect the status and trends of native bats across their range. The USGS is supporting the national WNS response through four science goals: (1) provide situational awareness on the health of bat populations; (2) conduct ecological studies of bats along the gradient of disease vulnerability; (3) contribute actionable science to enhance the resiliency of bat populations; and (4) implement an adaptive, holistic approach to bat health.

Circular↗