USGS Science⌕ Search

SEARCH · USGS Science

Results for “Minerals and the Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources

Environment of deposition of CaCO3 in Elk Lake, Minnesota

Elk Lake is near the present forest-prairie border in northwestern Minnesota, and is also located on the boundary between hard-water lakes that are typical of once-glaciated parts of the north-central United States and more saline prairie lakes of western Minnesota and the Dakotas. The sediments of the prairie lakes just west of Elk Lake are unusual in that they commonly contain high-Mg calcite and dolomite in addition to low-Mg calcite, which is the dominant carbonate mineral in most marl lakes. During the mid-Holocene dry period, prairie conditions expanded eastward into the forested regions of Minnesota. Variations in types and abundances of carbonate minerals in the Holocene sediments of Elk Lake recorded this climatic change. Studies of primary productivity, carbonate saturation, water chemistry, and sediment-trap samples show that low-Mg calcite precipitates during the summer, triggered by algal photosynthesis. The epilimnion of Elk Lake is always oversaturated with calcite, and the degree of oversaturation increases progressively during the summer. The pH of the epilimnion increases from <8.0 after spring overturn to almost 9.0 in late summer in response to photosynthetic removal of CO 2 during the summer months. The rate of calcium depletion from the epilimnion is proportional to the increase in pH and the rate of photosynthetic carbon fixation. Today the only carbonate minerals that are accumulating in the sediments of Elk Lake are low-Mg calcite and manganese carbonate (rhodochrosite). Rhodochrosite, and probably manganese oxyhydroxide, precipitates when manganese-rich anoxic bottom waters come in contact with carbonate-rich oxic surface waters. During the arid mid-Holocene prairie period, however, low-Mg calcite, dolomite, aragonite, and rhodochrosite all accumulated in the sediments of Elk Lake. Dolomite formed in Elk Lake during this period in response to a higher Mg:Ca ratio in the water, just as it is forming today in lakes of the prairie regions of western Minnesota. The coincident occurrence of aragonite and biological indicators of high salinity suggests that the salinity of Elk Lake and the Mg:Ca ratio were higher than in any of the present prairie lakes of western Minnesota.

Minnesota↗

Chemical weathering in a tropical watershed, Luquillo Mountains, Puerto Rico: I. Long-term versus short-term weathering fluxes

The pristine Rio Icacos watershed in the Luquillo Mountains in eastern Puerto Rico has the fastest documented weathering rate of silicate rocks on the Earth's surface. A regolith propagation rate of 58 m Ma-1 calculated from iso-volumetric saprolite formation from quartz diorite, is comparable to the estimated denudation rate (25-50 Ma-1) but is an order of magnitude faster than the global average weathering rate (6 Ma-1). Weathering occurs in two distinct environments; plagioclase and hornblende react at the saprock interface and biotite and quartz weather in the overlying thick saprolitic regolith. These environments produce distinctly different water chemistries, with K, Mg, and Si increasing linearly with depth in saprolite porewaters and with stream waters dominated by Ca, Na, and Si. Such differences are atypical of less intense weathering in temperate watersheds. Porewater chemistry in the shallow regolith is controlled by closed-system recycling of inorganic nutrients such as K. Long-term elemental fluxes through the regolith (e.g., Si = 1.7 ?? 10-8 moles m-2 s-1) are calculated from mass losses based on changes in porosity and chemistry between the regolith and bedrock and from the age of the regolith surface (200 Ma). Mass losses attributed to solute fluxes are determined using a step-wise infiltration model which calculates mineral inputs to the shallow and deep saprolite porewaters and to stream water. Pressure heads decrease with depth in the shallow regolith (-2.03 m H2O m-1), indicating that both increasing capillary tension and graviometric potential control porewater infiltration. Interpolation of experimental hydraulic conductivities produces an infiltration rate of 1 m yr-1 at average field moisture saturation which is comparable with LiBr tracer tests and with base discharge from the watershed. Short term weathering fluxes calculated from solute chemistries and infiltration rates (e.g., Si = 1.4 ?? 10-8 moles m-2 s-1) are compared to watershed flux rates (e.g., Si = 2.7 ?? 10-8 moles m-2 s-1). Consistency between three independently determined sets of weathering fluxes imply that possible changes in precipitation, temperature, and vegetation over the last several hundred thousand years have not significantly impacted weathering rates in the Luquillo Mountains of Puerto Rico. This has important ramifications for tropical environments and global climate change. Copyright ?? 1998 Elsevier Science Ltd.

Geochimica et Cosmochimica Acta↗

Use of airborne imaging spectrometer data to map minerals associated with hydrothermally altered rocks in the northern Grapevine Mountains, Nevada, and California

Three flightlines of Airborne Imaging Spectrometer (AIS) data, acquired over the northern Grapevine Mountains, Nevada, and California, were used to map minerals associated with hydrothermally altered rocks. The data were processed to remove vertical striping, normalized using an equal area normalization, and reduced to reflectance relative to an average spectrum derived from the data. An algorithm was developed to automatically calculate the absorption band parameters band position, band depth, and band width for the strongest absorption feature in each pixel. These parameters were mapped into an intensity, hue, saturation (IHS) color system to produce a single color image that summarized the absorption band information, This image was used to map areas of potential alteration based upon the predicted relationships between the color image and mineral absorption band. Individual AIS spectra for these areas were then examined to identify specific minerals. Two types of alteration were mapped with the AIS data. Areas of quartz-sericite-pyrite alteration were identified based upon a strong absorption feature near 2.21 μm, a weak shoulder near 2.25 μm, and a weak absorption band near 2.35 μm caused by sericite (fine-grained muscovite). Areas of argillic alteration were defined based on the presence of montmorillonite, identified by a weak to moderate absorption feature near 2.21 μm and the absence of the 2.35 μm band. Montmorillonite could not be identified in mineral mixtures. Calcite and dolomite were identified based on sharp absorption features near 2.34 and 2.32 μm, respectively. Areas of alteration identified using the AIS data corresponded well with areas mapped using field mapping, field reflectance spectra, and laboratory spectral measurements.

California, Nevada↗

Animating the biodynamics of soil thickness using process vector analysis: A dynamic denudation approach to soil formation

This paper expands the dynamic denudation framework of landscape evolution by providing new process insights and details on how soil and its signature morphological feature, the biomantle, form and function in the environment. We examine soils and their biomantles from disparate parts of the world, from the tropics through midlatitudes and hyperarid through perhumid, a range that exhibits varying environments for, and of, life. We then explicate the process pathways that cause soils to thicken and thin, and to even disappear, then reform. We do this by examining thickness relationships, where soil thickness stand biomantle thickness bt are functions of upbuilding u and deepening d minus removal r processes, hence st/bt=f(u+d-r). Upbuilding has two subsets, u1, which includes all exogenous (allochthonous-outside) mineral and/or organic inputs to the soil system, and u2, which includes all endogenous (autochthonous-in situ) processes and productions, including weathering. Exogenous u1 inputs include eolian and slopewash inputs (sedimentations) of mineral and organic materials, mass wasting accumulations and the like. Endogenous u2 processes and productions include the sum of in situ bioturbations, biosynthetic productions, organic accumulations, biovoid productions, weathering and volume increases caused by their sum. Endogenous upbuildings, which dominantly occur in the biomantle, are basically biodynamic bd processes and productions, hence u2=bd. Therefore, if exogenous upbuildings u1 are minimal or zero, then biomantle thickness bt is expressed by bt=f(u2-r) or bt=f(bd-r). Drawing on these relationships, we employ a graphic-conceptual device called process vector analysis in a digital animation (see supplementary materials or cf. https://netfiles.uiuc.edu/jdomier/www/temp/ biomantle.html) that illustrates the main pathways that form both Earth's soil and its unique epidermis, the biomantle. We then discuss the main elements of the animation using still frames that represent thickness turning points. We end by encouraging researchers, instructors and students to view Earth's landforms and soils as integrated dynamic entities that are constantly coevolving elements of a global subaerial-subaqueous continuum. ?? 2004 Elsevier B.V. All rights reserved.

Geomorphology↗

Genetic and grade and tonnage models for sandstone-hosted roll-type uranium deposits, Texas Coastal Plain, USA

The coincidence of a number of geologic and climatic factors combined to create conditions favorable for the development of mineable concentrations of uranium hosted by Eocene through Pliocene sandstones in the Texas Coastal Plain. Here 254 uranium occurrences, including 169 deposits, 73 prospects, 6 showings and 4 anomalies, have been identified. About 80 million pounds of U 3 O 8 have been produced and about 60 million pounds of identified producible U 3 O 8 remain in place. The development of economic roll-type uranium deposits requires a source, large-scale transport of uranium in groundwater, and deposition in reducing zones within a sedimentary sequence. The weight of the evidence supports a source from thick sequences of volcanic ash and volcaniclastic sediment derived mostly from the Trans-Pecos volcanic field and Sierra Madre Occidental that lie west of the region. The thickest accumulations of source material were deposited and preserved south and west of the San Marcos arch in the Catahoula Formation. By the early Oligocene, a formerly uniformly subtropical climate along the Gulf Coast transitioned to a zoned climate in which the southwestern portion of Texas Coastal Plain was dry, and the eastern portion humid. The more arid climate in the southwestern area supported weathering of volcanic ash source rocks during pedogenesis and early diagenesis, concentration of uranium in groundwater and movement through host sediments. During the middle Tertiary Era, abundant clastic sediments were deposited in thick sequences by bed-load dominated fluvial systems in long-lived channel complexes that provided transmissive conduits favoring transport of uranium-rich groundwater. Groundwater transported uranium through permeable sandstones that were hydrologically connected with source rocks, commonly across formation boundaries driven by isostatic loading and eustatic sea level changes. Uranium roll fronts formed as a result of the interaction of uranium-rich groundwater with either (1) organic-rich debris adjacent to large long-lived fluvial channels and barrier–bar sequences or (2) extrinsic reductants entrained in formation water or discrete gas that migrated into host units via faults and along the flanks of salt domes and shale diapirs. The southwestern portion of the region, the Rio Grande embayment, contains all the necessary factors required for roll-type uranium deposits. However, the eastern portion of the region, the Houston embayment, is challenged by a humid environment and a lack of source rock and transmissive units, which may combine to preclude the deposition of economic deposits. A grade and tonnage model for the Texas Coastal Plain shows that the Texas deposits represent a lower tonnage subset of roll-type deposits that occur around the world, and required aggregation of production centers into deposits based on geologic interpretation for the purpose of conducting a quantitative mineral resource assessment.

Texas↗

Widespread potential for microbial MTBE degradation in surface-water sediments

Microorganisms indigenous to stream and lake bed sediments, collected from 11 sites throughout the United States, demonstrated significant mineralization of the fuel oxygenate, methyl-tert-butyl ether (MTBE). Mineralization of [U-14C]MTBE to 14CO2 ranged from 15 to 66% over 50 days and did not differ significantly between sediments collected from MTBE contaminated sites and from sites with no history of MTBE exposure. This result suggests that even the microbial communities indigenous to newly contaminated surface water systems will exhibit some innate ability to attenuate MTBE under aerobic conditions. The magnitude of MTBE mineralization was related to the sediment grain size distribution. A pronounced, inverse correlation (p < 0.001; r2 = 0.73) was observed between the final recovery of 14CO2 and the percentage content of silt and clay sized grains (grain diameter < 0.125 mm). The results of this study indicate that the microorganisms that inhabit the bed sediments of streams and lakes can degrade MTBE efficiently and that this capability is widespread in the environment. Thus aerobic bed sediment microbial processes may provide a significant environmental sink for MTBE in surface water systems throughout the United States and may contribute to the reported transience of MTBE in some surface waters.

Environmental Science & Technology↗

Use of raw materials in the United States from 1900 through 2010

Since the beginning of the 20th century, the types and quantities of raw materials used by U.S. manufacturers and consumers have changed over time. This fact sheet quantifies the amounts of those materials (other than food and fuel) that have been input into the U.S. economy annually for a period of 111 years, from 1900 through 2010. It provides a broad overview of all materials used but highlights the use and importance of raw nonfuel minerals in particular. This fact sheet supersedes U.S. Geological Survey Fact Sheet 2009–3008, which was published in April 2009 and covered the period 1900 through 2006. These data have been compiled to help the public and policymakers understand the flow of raw materials used in the United States in physical terms. Such information can be helpful in assessing the past and potential effects of the materials on the environment, evaluating the materials’ intensity of use, and examining the role that these materials play in the economy. It can also provide insight into what may happen to the materials at the end of their useful life.

Fact Sheet↗

Aquifers of Arkansas: protection, management, and hydrologic and geochemical characteristics of groundwater resources in Arkansas

Sixteen aquifers in Arkansas that currently serve or have served as sources of water supply are described with respect to existing groundwater protection and management programs, geology, hydrologic characteristics, water use, water levels, deductive analysis, projections of hydrologic conditions, and water quality. State and Federal protection and management programs are described according to regulatory oversight, management strategies, and ambient groundwater-monitoring programs that currently (2013) are in place for assessing and protecting groundwater resources throughout the State. Physical attributes, groundwater geochemistry, and groundwater quality are described for each of the 16 aquifers of the State. Information in regard to the hydrology and geochemistry of each of the aquifers is summarized from about 550 historical and recent publications. Additionally, more than 8,000 sites with groundwater-quality data were obtained from the U.S. Geological Survey National Water Information System and the Arkansas Department of Environmental Quality databases and entered into a spatial database to investigate distribution and trends in chemical constituents for each of the aquifers. The 16 aquifers of the State were divided into two major physiographic regions of the State: the Coastal Plain Province (referred to as Coastal Plain) of eastern and southern Arkansas, which includes 11 of the 16 aquifers, and the Interior Highlands Division (referred to as Interior Highlands) of western Arkansas, which includes the remaining 5 aquifers. The 11 aquifers in the Coastal Plain consist of various geologic units that are Cenozoic in age and consist primarily of Cretaceous, Tertiary, and Quaternary sands, gravels, silts, and clays. Groundwater in the Coastal Plain represents one of the most valuable natural resources in the State, driving the economic engines of agriculture, while also supplying abundant water for commercial, industrial, and public-supply use. In terms of age from youngest to oldest, the aquifers of the Coastal Plain include Quaternary alluvial aquifers, including the Mississippi River Valley alluvial aquifer (the most important aquifer in Arkansas in terms of volume of use and economic benefits), the Jackson Group (a regional confining unit that served for decades as an important source of domestic supply), and the Cockfield, Sparta, Cane River, Carrizo, Wilcox, Nacatoch, Ozan, Tokio, and Trinity aquifers. The Mississippi River Valley alluvial aquifer accounts for approximately 94 percent of all groundwater used in the State, and the aquifer is used primarily for irrigation purposes. The Sparta aquifer is the second most important aquifer in terms of use, and the aquifer was used in the past dominantly as a source of public and industrial supply, although increasing irrigation use is occurring because of critically declining water levels in the Mississippi River Valley alluvial aquifer. Other aquifers of the Coastal Plain generally are used as important local sources of domestic, industrial, and public supply, in addition to other minor uses. Water quality generally is good for all aquifers of the Coastal Plain, except for elevated iron concentrations and localized areas of high salinity. The high salinity results from intrusion from underlying formations, evapotranspiration processes in areas of low recharge, and inadequate flushing in downgradient areas of residual salinity from deposition in marine environments. Trends in the spatial distribution of individual chemical constituents are related to position along the flow path for most aquifers of the Coastal Plain. These trends include elevated iron and nitrate concentrations with lower pH values and dissolved solids in groundwater from the outcrop areas, transitioning to lower iron and nitrate (related to changes in redox) and higher pH and dissolved solids (dominantly from the dissolution of carbonate minerals) in groundwater downgradient from outcrop areas. Groundwater generally trended from a calcium- to a sodium-bicarbonate water type with increasing cation exchange along the flow path. The Interior Highlands of western Arkansas has less reported groundwater use than other areas of the State, reflecting a combination of factors. These factors include prevalent and increasing use of surface water, less intensive agricultural uses, lower population and industry densities, lesser potential yield of the resource, and lack of detailed reporting. The overall low yields of aquifers of the Interior Highlands result in domestic supply as the dominant use, with minor industrial, public, and commercial-supply use. Where greater volumes are required for growth of population and industry, surface water is the greatest supplier of water needs in the Interior Highlands. The various aquifers of the Interior Highlands generally occur in shallow, fractured, well-indurated, structurally modified bedrock of this mountainous region of the State, as compared to the relatively flat-lying, unconsolidated sediments of the Coastal Plain. In terms of age from youngest to oldest, the aquifers of the Interior Highlands include: the Arkansas River Valley alluvial aquifer, the Ouachita Mountains aquifer, the Western Interior Plains confining system, the Springfield Plateau aquifer, and the Ozark aquifer. Spatial trends in groundwater geochemistry in the Interior Highlands differ greatly from trends noted for aquifers of the Coastal Plain. In the Coastal Plain, the prevalence of long regional flow paths results in regionally predictable and mappable geochemical changes along the flow paths. In the Interior Highlands, short, topographically controlled flow paths (from hilltops to valleys) within small watersheds represent the predominant groundwater-flow system. As such, dense data coverage from numerous wells would be required to effectively characterize these groundwater basins and define small-scale geochemical changes along any given flow path for aquifers of the Interior Highlands. Changes in geochemistry generally were related to rock type and residence time along individual flow paths. Dominant changes in geochemistry for the Ouachita Mountains aquifer and the Western Interior Plains confining system are attributed to rock/water interaction and changes in redox zonation along the flow path. In these areas, groundwater evolves along flow paths from a calcium- to a sodium-bicarbonate water type with increasing reducing conditions resulting in denitrification, elevated iron and manganese concentrations, and production of methane in the more geochemically evolved and strongest reducing conditions. In the Ozark and Springfield Plateau aquifers, rapid influx of surface-derived contaminants, especially nitrogen, coupled with few to no attenuation processes was attributed to the karst landscape developed on Mississippian- and Ordovician-age carbonate rocks of the Ozark Plateaus. Increasing nitrate concentrations are related to increasing agricultural land use, and areas of mature karst development result in higher nitrate concentrations than areas with less karst features.

Arkasas↗

Aerobic biodegradation potential of endocrine disrupting chemicals in surface-water sediment at Rocky Mountains National Park, USA

Endocrine disrupting chemicals (EDC) in surface water and bed sediment threaten the structure and function of aquatic ecosystems. In natural, remote, and protected surface-water environments where contaminant releases are sporadic, contaminant biodegradation is a fundamental driver of exposure concentration, timing, duration, and, thus, EDC ecological risk. Anthropogenic contaminants, including known and suspected EDC, were detected in surface water and sediment collected from 2 streams and 2 lakes in Rocky Mountains National Park (ROMO). The potential for aerobic EDC biodegradation was assessed in collected sediments using 6 14 C-radiolabeled model compounds. Aerobic microbial mineralization of natural (estrone and 17&beta;-estradiol) and synthetic (17&alpha;-ethinylestradiol) estrogen was significant at all sites. ROMO bed sediment microbial communities also effectively degraded the xenoestrogens, bisphenol-A and 4-nonylphenol. The same sediment samples exhibited little potential for aerobic biodegradation of triclocarban, however, illustrating the need to assess a wider range of contaminant compounds. The current results support recent concerns over the widespread environmental occurrence of carbanalide antibacterials, like triclocarban and triclosan, and suggest that backcountry use of products containing these compounds should be discouraged.

Rocky Mountain National Park↗

Aqua de Ney, California, a spring of unique chemical character

The chemistry of water of Aqua de Ney, a cold spring of unusual character located in Siskiyou County, Calif., has been re-examined as part of a study of the relation of water chemistry to rock environment. The water has a pH of 11·6 and a silica content of 4000 parts per million (p.p.m.), the highest values known to occur in natural ground waters. The rocks exposed nearby consist of two volcanic sequences, one predominantly basaltic in composition, the other highly siliceous. Neither these rocks nor the sedimentary and igneous rocks presumed to underlie the area at depth seem to offer explanation of the unusual mineralization which includes 240 p.p.m. of boron, 1000 p.p.m. of sulphide (as H 2 S), and 148 p.p.m. of ammonia nitrogen (as NH 4 ) in a water that is predominantly sodium chloride and sodium carbonate in character. By analogy, it is assumed that water from Aqua de Ney is the product of an initial mixture of connate sea water with a calcium magnesium sulphate water. It is postulated that ion exchange has increased the content of sodium and reduced that of calcium and magnesium, and that sulphate reduction has brought about the high alkalinity, high pH, and high content of sulphide. The large silica value is explained as the result of solution of silica by water having the high pH observed.

California↗

Lead and strontium isotopes as monitors of anthropogenic contaminants in the surficial environment

Isotopic discrimination can be an effective tool in establishing a direct link between sources of Pb contamination and the presence of anomalously high concentrations of Pb in waters, soils, and organisms. Residential wells supplying water containing up to 1600 ppb Pb to houses built on the former Mohr orchards commercial site, near Allentown, Pennsylvania, United States, were evaluated to discern anthropogenic from geogenic sources. Pb and Sr isotopic data and REE data were determined for waters from residential wells, test wells (drilled for this study), and surface waters from pond and creeks. Local soils, sediments, bedrock, Zn-Pb mineralization and coal were also analyzed, together with locally used Pb-As pesticide. Pb isotope data for residential wells, test wells, and surface waters show substantial overlap with Pb data reflecting anthropogenic actions (e.g., burning fossil fuels, industrial and urban processing activities). Limited contributions of Pb from bedrock, soils, and pesticides are evident. High Pb concentrations in the residential waters are likely related to Pb in groundwater accumulating in sediment in the residential water tanks. The Pb isotope features of waters in underlying shallow aquifers that supply residential wells in the region are best interpreted as reflecting a legacy of anthropogenic Pb rather than geogenic Pb.

Book chapter↗

The effects of drought and fire in the extirpation of an abundant semi-aquatic turtle from a lacustrine environment in the southwestern USA

We documented a significant mortality event affecting a southwestern pond turtle ( Actinemys pallida ) population living in a lake in southern California, USA. The area around the lake was impacted by a large wildland fire in 2013 that occurred during a protracted drought. As the mortality event was still unfolding, we collected data in 2014 on water quality, demographic structure, and short-term survivorship of the population. Water quality was poor with low levels of dissolved oxygen and high salinity of up to 45.90 ppt. Many turtles were severely emaciated and coated with a pale mineralized layer on their shells and skin. Estimated survival rate was low leading to a projected 90% decline in 134 days and a high probability of extirpation within a year. The lake was dry in September 2015 with no evidence of live turtles. Necropsies and low volumetric body condition indices suggested death by starvation. Although this semi-aquatic species has the ability to aestivate in upland habitats during periods of low water or move to other nearby water bodies, it is unlikely that many were able to do so because of their extremely poor condition and the severity of the drought conditions throughout the area.

Knowledge and Management of Aquatic Ecosystems↗

Lithium in groundwater used for drinking-water supply in the United States

Lithium concentrations in untreated groundwater from 1464 public-supply wells and 1676 domestic-supply wells distributed across 33 principal aquifers in the United States were evaluated for spatial variations and possible explanatory factors. Concentrations nationwide ranged from <1 to 396 μg/L (median of 8.1) for public supply wells and <1 to 1700 μg/L (median of 6 μg/L) for domestic supply wells. For context, lithium concentrations were compared to a Health Based Screening Level (HBSL, 10 μg/L) and a drinking-water only threshold (60 μg/L). These thresholds were exceeded in 45% and 9% of samples from public-supply wells and in 37% and 6% from domestic-supply wells, respectively. However, exceedances and median concentrations ranged broadly across geographic regions and principal aquifers. Concentrations were highest in arid regions and older groundwater, particularly in unconsolidated clastic aquifers and sandstones, and lowest in carbonate-rock aquifers, consistent with differences in lithium abundance among major lithologies and rock weathering extent. The median concentration for public-supply wells in the unconsolidated clastic High Plains aquifer (central United States) was 24.6 μg/L; 24% of the wells exceeded the drinking-water only threshold and 86% exceeded the HBSL. Other unconsolidated clastic aquifers in the arid West had exceedance rates comparable to the High Plains aquifer, whereas no public supply wells in the Biscayne aquifer (southern Florida) exceeded either threshold, and the highest concentration in that aquifer was 2.6 μg/L. Multiple lines of evidence indicate natural sources for the lithium concentrations; however, anthropogenic sources may be important in the future because of the rapid increase of lithium battery use and subsequent disposal. Geochemical models demonstrate that extensive evaporation, mineral dissolution, cation exchange, and mixing with geothermal waters or brines may account for the observed lithium and associated constituent concentrations, with the latter two processes as major contributing factors.

Science of the Total Environment↗

Anthropogenic and natural lead isotopes in Fe-hydroxides and Fe-sulphates in a watershed associated with arsenic-enriched groundwater, Maine, USA

A survey of the natural and anthropogenic sources of lead contributing to secondary minerals in sulphidic schists associated with arsenic-enriched groundwater in Coastal Maine shows that the most likely source is natural Pb, particularly from coexisting sulphide minerals. The secondary minerals also reflect notable contributions from anthropogenic Pb. The Pb isotopes establish pathways by which Pb, and by inference As, could have been transported from As-bearing minerals (arsenian pyrite, arsenopyrite, lollingite, orpiment, arsenic oxide and others), via sulphide oxidation or carbonation reactions into multiple generations of secondary minerals (goethite, hematite, jarosite, natrojarosite and others). Lead isotopic compositions of the sulphides and secondary minerals determined by thermal ionization mass spectrometry ( n =53) range widely. Lead and As contents of the sulphides and secondary minerals overlap, and are generally positively correlated. Pyrite, the dominant sulphide in sulphidic schists associated with As-enriched groundwater in Coastal Maine, has values of 206 Pb/ 204 Pb from 18.186 to 18.391, 207 Pb/ 204 Pb from 15.617 to 15.657, 208 Pb/ 204 Pb from 38.052 to 38.210, 206 Pb/ 207 Pb from c . 1.1625 to 1.1760 and 208 Pb/ 207 Pb from c . 2.4276 to 2.4394. Mixtures of Fe-hydroxide and oxide minerals (predominantly goethite and hematite) and secondary Fe-sulphate minerals (jarosite, natrojarosite, rozenite and melanterite) in the sulphidic schists have overlapping but generally higher values of 206 Pb/ 204 Pb from 18.495 to 19.747 (one sample at 21.495), 207 Pb/ 204 Pb from 15.595 to 15.722 (one sample at 15.839), 208 Pb/ 204 Pb from 38.186 to 39.162, 206 Pb/ 207 Pb from c. 1.1860 to 1.2575 (one sample at 1.3855) and 208 Pb/ 207 Pb from c . 2.4441 to 2.4865 than the sulphides. Sulphides from Zn-Pb metal mines are somewhat less radiogenic than sulphides from the schists. Other sulphides (mostly pyrite) associated with pegmatites and granitic rocks are heterogeneous and more radiogenic than the pyrite-rich sulphidic schists. Sulphides from other regional bedrock units also have heterogeneous isotope values. Lead isotopic compositions of the sulphides from the sulphidic schists and coexisting Fe-oxides and Fe-sulphates produced by weathering and alteration overlap, but the secondary minerals extend toward more radiogenic values that broadly indicate the addition of Pb from anthropogenic origin. As a component of Pb from extensively used arsenical pesticides may also be present in the secondary minerals, the range in Pb isotope values is consistent with multiple sources: natural Pb from the schists and anthropogenic Pb (industrial and possibly from agricultural activities). Contributions from past mining activities or from other bedrock sources are not implicated.

Maine↗

The Kharapeh orogenic gold deposit: Geological, structural, and geochemical controls on epizonal ore formation in West Azerbaijan Province, Northwestern Iran

The Kharapeh gold deposit is located along the northwestern margin of the Sanandaj–Sirjan Zone (SSZ) in the West Azerbaijan province, Iran. It is an epizonal orogenic gold deposit formed within the deformed zone between central Iran and the Arabian plate during the Cretaceous–Tertiary Zagros orogeny. The deposit area is underlain by Cretaceous schist and marble, as well as altered andesite and dacite dikes. Structural analysis indicates that the rocks underwent tight to isoclinal recumbent folding and were subsequently co-axially refolded to upright open folds during a second deformation. Late- to post-tectonic Cenozoic granites and granodiorites occur northeast of the deposit area. Mineralization mainly is recognized within NW-trending extensional structures as veins and breccia zones. Normal faults, intermediate dikes, and quartz veins, oriented subparallel to the axial surface of the Kharapeh antiform, indicate synchronous extension perpendicular to the fold axis during the second folding event. The gold-bearing quartz veins are >1 km in length and average about 6 m in width; breccia zones are 10–50 m in length and ≤1 m in width. Hydrothermal alteration mainly consists of silicification, sulfidation, chloritization, sericitization, and carbonatization. Paragenetic relationships indicate three distinct stages—replacement and silicification, brecciation and fracture filling, and cataclastic brecciation—with the latter two being gold-rich. Fluid inclusion data suggest mineral deposition at temperatures of at least 220–255°C and depths of at least 1.4–1.8 km, from a H 2 O–CO 2 ±CH 4 fluid of relatively high salinity (12–14 wt.% NaCl equiv.), which may reflect metamorphism of passive margin carbonate sequences. Ore fluid δ 18 O values between about 7‰ and 9‰ suggest no significant meteoric water input, despite gold deposition in a relatively shallow epizonal environment. Similarities to other deposits in the SSZ suggest that the deposit formed as part of a diachronous gold event during the middle to late Tertiary throughout the SSZ and during the final stages of the Zagros orogeny. The proximity of Kharapeh to the main tectonic suture of the orogen, well-developed regional fold systems with superimposed complex fracture geometries, and recognition of nearby volcanogenic massive sulfide systems that suggest a region characterized by sulfur- and metal-rich crustal rocks, collectively indicate an area of the SSZ with high favorability for undiscovered gold resources.

West Azerbaijan Province↗

Metallogenic map of volcanogenic massive sulfide occurrences in Wyoming

Volcanogenic massive sulfide occurrences of Late Archean age and Early Proterozoic age occur in metavolcanic and associated metasedimentary rocks in southeastern, eastern, and central Wyoming. Vein deposits in Archean volcanic terrane have accounted for a large part of the gold production in the State (Miners Delight, locality 8). Past production from all massive sulfide occurrences in the State is poorly known, but it probably did not exceed $13 million at current metal prices. The bulk of the production was from gold mines in the southern Wind River Range (localities 8 and 17). For the most part, the host rocks of the massive sulfide occurrences have been metamorphosed to amphibolite facies. As a result, the depositional environments are, in many cases, difficult to determine. For purposes of discussion, the occurrences are classified by geologic age.

Wyoming↗

Species abundance and potential biological control services in shade vs. sun coffee in Puerto Rico

Birds, lizards and insects were surveyed in three sun and three shade coffee plantations in Puerto Rico to provide a comprehensive comparison of biodiversity between plantations types and to identify potential interrelationships (e.g., biological or natural control services) between members of each taxon and coffee pests. Abundance of avian species, including insectivorous species, was significantly higher in shade coffee. Anolis cristatellus and A. stratulus were significantly more abundant in sun plantations whereas A. gundlachi and A. evermanni were detected more frequently in shade plantations. Insects in the orders Coleoptera, Diptera, Hemiptera, Hymenoptera, Lepidoptera, Neuroptera, and Psocoptera were significantly more abundant in shade coffee, while orthopterans were more abundant in sun. The coffee leaf miner ( Leucoptera coffeela ) and the flatid planthopper ( Petrusa epilepsis ) did not differ significantly between plantation types, nor did the abundance of the wasp complex that parasitizes the coffee leaf miner. These findings confirmed that shade plantations harbor a wide array of elements of biodiversity; but sun plantations may also harbor many elements of biodiversity, and in some cases, in higher abundance than in shade plantations.

Agriculture, Ecosystems and Environment↗

Challenge theme 4: People in the Borderlands: Chapter 6 in United States-Mexican Borderlands: Facing tomorrow's challenges through USGS science

The management of shared resources in the United States–Mexican border region requires cooperation from the people of both countries to assess and understand their relation to the environment. Society is dependent on the long-term healthy functioning of ecosystems and their ability to supply food and raw materials. Likewise, resources and services obtained from nature could be used efficiently within the society. A more equitable distribution of costs and benefits related to goods and services can lead to fewer tensions and a higher quality of life for all the people in the Borderlands. Urban development, background contamination from mineral ore deposits, irrigation, sewage effluent, and even global climate change all have the potential to alter the stability of the fragile systems in the Borderlands (Brady and others, 2001, 2002; Norman, 2007, 2010; Gu and others, 2008; Norman, Gray, and others, 2008; Norman, Hirsch, and Ward, 2008; Norman, Callegary, and others, 2010; Norman, Huth, and others, 2010; Norman, Levick, and others, 2010; Norman, Tallent-Halsell, and others, 2010; Norman, Villarreal, and others 2012). Social efficiency means that because resources should be used where they are needed most, they should be distributed proportionally among human societies and individuals (Azar and others, 1996). Despite the critical role natural resources play in maintaining human and environmental health, current knowledge of the manner in which natural and human-caused forces interact to limit these resources—including their quality and quantity (such as through spatiotemporal changes in precipitation, evapotranspiration, pumping of groundwater, and release of contaminants)—is inadequate. The U.S. Geological Survey (USGS) is trying to understand the relation between changing landscapes, changing demographics, and a changing climate in the Borderlands while the environmental, economic, and societal issues continue to be intertwined between the two nations.

United States-Mexico Borderlands↗