SEARCH · USGS Science

Results for “Issue Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources

USGS2017

Niobium and tantalum

Niobium and tantalum are transition metals that are almost always found together in nature because they have very similar physical and chemical properties. Their properties of hardness, conductivity, and resistance to corrosion largely determine their primary uses today. The leading use of niobium (about 75 percent) is in the production of high-strength steel alloys used in pipelines, transportation infrastructure, and structural applications. Electronic capacitors are the leading use of tantalum for high-end applications, including cell phones, computer hard drives, and such implantable medical devices as pacemakers. Niobium and tantalum are considered critical and strategic metals based on the potential risks to their supply (because current production is restricted to only a few countries) and the significant effects that a restriction in supply would have on the defense, energy, high-tech industrial, and medical sectors. The average abundance of niobium and tantalum in bulk continental crust is relatively low—8.0 parts per million (ppm) niobium and 0.7 ppm tantalum. Their chemical characteristics, such as small ionic size and high electronic field strength, significantly reduce the potential for these elements to substitute for more common elements in rock-forming minerals and make niobium and tantalum essentially immobile in most aqueous solutions. Niobium and tantalum do not occur naturally as pure metals but are concentrated in a variety of relatively rare oxide and hydroxide minerals, as well as in a few rare silicate minerals. Niobium is primarily derived from the complex oxide minerals of the pyrochlore group ((Na,Ca,Ce) 2 (Nb,Ti,Ta) 2 (O,OH,F) 7 ), which are found in some alkaline granite-syenite complexes (that is, igneous rocks containing sodium- or potassium-rich minerals and little or no quartz) and carbonatites (that is, igneous rocks that are more than 50 percent composed of primary carbonate minerals, by volume). Tantalum is derived mostly from the mineral tantalite ((Fe,Mn)(Ta,Nb) 2 O 6 ), which is found as an accessory mineral in rare-metal granites and pegmatites that are also enriched in lithium and cesium (termed lithium-cesium-tantalum (LCT)-type pegmatites). Brazil and Canada are the leading nations that produce niobium mineral concentrates, but Brazil is by far the leading producer, accounting for about 90 percent of production, which comes mostly from weathered material derived from carbonatites. Brazil and Canada also have the largest identified niobium resources; additional resources, although they are less well reported, occur in Angola, Australia, China, Greenland, Malawi, Russia, and South Africa. Australia and Brazil have been the leading producers of tantalum mineral concentrates, although recently Ethiopia and Mozambique have also been significant suppliers of tantalum. Artisanal mining of columbite-tantalite (also called coltan) is practiced in many countries, particularly Burundi, the Democratic Republic of the Congo (Congo [Kinshasa]), Nigeria, Rwanda, and Uganda. Brazil has about 40 percent of the identified tantalum resources; other countries and regions with identified tantalum resources include, in decreasing order of resources, Australia, Asia, Russia and the Middle East, Africa, North America, and Europe. Identified niobium and tantalum resources in the United States are small, low grade, and difficult to recover and process, and are thus not commercially recoverable at current prices. Consequently, the United States meets its current and expected future needs for niobium and tantalum through imports of primary mineral concentrates and alloys and through recovery from foreign and domestic alloy scrap that contain the metals. Environmentally, the main issues related to niobium and tantalum mining are land disruptions, the volume of waste materials and their disposal, and the radioactivity of some tailings and waste materials that contain thorium and uranium. Because of the relative biological inertness of niobium and tantalum, human and ecological health concerns are generally minimal under most natural conditions. Demand for both niobium and tantalum is expected to increase as the world economy continues to recover from the downturn that began in 2008. Increased demand for niobium is linked to increased consumption of microalloyed steel, which is used in the manufacture of cars, buildings, ships, and refinery equipment. Demand for these steels will likely increase with continued economic development in such countries as Brazil, China, and India. In addition, increased global demand for cars, cell phones, computers, superconducting magnets, and other high-tech devices will likely spur increased demand for both niobium and tantalum. The estimated global reserves and resources of niobium and tantalum are large and appear more than sufficient to meet global demand for the foreseeable future, possibly the next 500 years. The sale of “conflict coltan” attributed to rebel forces waging a civil war in Congo (Kinshasa) has been of recent concern and has highlighted the need for a transparent and traceable global supply chain that can exclude illegal columbite-tantalite from the conventional market while discerning legitimate artisanal mine production in central Africa.

Professional Paper↗

USGS1978

Summary appraisals of the Nation's ground-water resources; Alaska

Alaska has enormous surface-water resources, but many of the streams are frozen for most of the year and most contain glacial silt that makes them unacceptable for human use. These factors lend special significance to ground water as a water-supply source, even though perennially frozen ground (permafrost) profoundly modifies ground-water flow systems in much of Alaska north of the maritime southern coast and southeastern panhandle areas. Frozen ground is a virtually impermeable layer that restricts recharge, discharge, and movement of ground water, acts as a confining layer and limits the volume of unconsolidated deposits and bedrock in which water may be stored. Ground water is an untested resource in most of Alaska, but in many areas potential development of ground water far exceeds current use. Alluvium of major river valleys, such as the Yukon, Tanana, Kuskokwim and Susitna Rivers, probably contains the most extensive aquifers in the State. Large amounts of ground water are also stored in glacial outwash aquifers that underlie coastal basins and valleys, such as those at Kenai and Anchorage in the Cook Inlet lowland. Individual wells yielding more than 1,000 gallons per minute have been developed in the Tanana River valley, Cook Inlet lowland, and the coastal valleys at Seward and Juneau. Comparable yields should be possible in other areas that have similar geohydrologic environments. No major aquifers have been identified in glacial and glaciolacustrine deposits of interior valleys or in deltaic deposits. Major bedrock aquifers have been identified only in carbonate rocks of the Brooks Range and on the north side of the Alaska Range. Springs issuing from the carbonate rocks of the Brooks Range have discharges as great as 16,000 gallons per minute. Most ground-water recharge occurs beneath reaches of stream channels that are losing flow to the ground-water system. Most ground-water discharge also takes place along reaches of stream channels. This discharge augments streamflows during summer and maintains low flows during winter when there is no surface-water runoff. On the basis of a streamflow hydrograph separation technique and using the 60 percent flow-duration value as an indicator of ground-water discharge, it is estimated that 25 percent of the total volume of streamflow in Alaska (exclusive of coastal, maritime environments) is contributed by ground-water discharge. The thawing of frozen ground in the permafrost regions of Alaska causes construction and engineering problems. Disturbance of the ground surface disrupts the natural thermal equilibrium and tends to thaw part of the permafrost. Thawing can cause loss of strength, a decrease in volume, and an increase in erosion potential, particularly if the frozen ground is fine grained and poorly drained. Present deficiencies in the ground-water information base are obvious limiting factors to ground-water development in Alaska. There is a need to extend the ground-water data-collection network and to pursue special research into the quantitative aspects of ground-water hydrology in cold regions, particularly the continuous permafrost zone.

Alaska↗

USGS2010

Using airborne geophysical surveys to improve groundwater resource management models

Increasingly, groundwater management requires more accurate hydrogeologic frameworks for groundwater models. These complex issues have created the demand for innovative approaches to data collection. In complicated terrains, groundwater modelers benefit from continuous high‐resolution geologic maps and their related hydrogeologic‐parameter estimates. The USGS and its partners have collaborated to use airborne geophysical surveys for near‐continuous coverage of areas of the North Platte River valley in western Nebraska. The survey objectives were to map the aquifers and bedrock topography of the area to help improve the understanding of groundwater‐surface‐water relationships, leading to improved water management decisions. Frequency‐domain heliborne electromagnetic surveys were completed, using a unique survey design to collect resistivity data that can be related to lithologic information to refine groundwater model inputs. To render the geophysical data useful to multidimensional groundwater models, numerical inversion is necessary to convert the measured data into a depth‐dependent subsurface resistivity model. This inverted model, in conjunction with sensitivity analysis, geological ground truth (boreholes and surface geology maps), and geological interpretation, is used to characterize hydrogeologic features. Interpreted two‐ and three‐dimensional data coverage provides the groundwater modeler with a high‐resolution hydrogeologic framework and a quantitative estimate of framework uncertainty. This method of creating hydrogeologic frameworks improved the understanding of flow path orientation by redefining the location of the paleochannels and associated bedrock highs. The improved models reflect actual hydrogeology at a level of accuracy not achievable using previous data sets.

Conference Paper↗

USGS2009

Characteristics of Southern California coastal aquifer systems

Most groundwater produced within coastal Southern California occurs within three main types of siliciclastic basins: (1) deep (>600 m), elongate basins of the Transverse Ranges Physiographic Province, where basin axes and related fluvial systems strike parallel to tectonic structure, (2) deep (>6000 m), broad basins of the Los Angeles and Orange County coastal plains in the northern part of the Peninsular Ranges Physiographic Province, where fluvial systems cut across tectonic structure at high angles, and (3) shallow (75-350 m), relatively narrow fluvial valleys of the generally mountainous southern part of the Peninsular Ranges Physiographic Province in San Diego County. Groundwater pumped for agricultural, industrial, municipal, and private use from coastal aquifers within these basins increased with population growth since the mid-1850s. Despite a significant influx of imported water into the region in recent times, groundwater, although reduced as a component of total consumption, still constitutes a significant component of water supply. Historically, overdraft from the aquifers has caused land surface subsidence, flow between water basins with related migration of groundwater contaminants, as well as seawater intrusion into many shallow coastal aquifers. Although these effects have impacted water quality, most basins, particularly those with deeper aquifer systems, meet or exceed state and national primary and secondary drinking water standards. Municipalities, academicians, and local water and governmental agencies have studied the stratigraphy of these basins intensely since the early 1900s with the goals of understanding and better managing the important groundwater resource. Lack of a coordinated effort, due in part to jurisdictional issues, combined with the application of lithostratigraphic correlation techniques (based primarily on well cuttings coupled with limited borehole geophysics) have produced an often confusing, and occasionally conflicting, litany of names for the various formations, lithofacies, and aquifer systems identified within these basins. Despite these nomenclatural problems, available data show that most basins contain similar sequences of deposits and share similar geologic histories dominated by glacio-eustatic sea-level fluctuations, and overprinted by syndepositional and postdepositional tectonic deformation. Impermeable, indurated mid-Tertiary units typically form the base of each siliciclastic groundwater basin. These units are overlain by stacked sequences of Pliocene to Holocene interbedded marine, paralic, fluvial, and alluvial sediment (weakly indurated, folded, and fractured) that commonly contain the historically named "80-foot sand," "200-foot sand," and "400-foot gravel" in the upper part of the section. An unconformity, cut during the latest Pleistocene lowstand (?? 18 O stage 2; ca. 18 ka), forms a major sequence boundary that separates these units from the overlying Holocene fluvial sands and gravels. Unconfined aquifers occur in amalgamated coarse facies near the bounding mountains (forebay area). These units are inferred to become lithologically more complex toward the center of the basins and coast line, where interbedded permeable and low-permeability alluvial, fluvial, paralic, and marine facies contain confined aquifers (pressure area). Coastal bounding faults limit intrabasin and/or interbasin flow in parts of many basins. ?? 2009 Geological Society of America.

Special Paper of the Geological Society of America↗

USGS2012

Conflicts between sandhill cranes and farmers in the western United States: evolving issues and solutions

The main conflicts between Sandhill Cranes (Grus canadensis) and farmers in western United States occur in the Rocky Mountain region during migration and wintering periods. Most crop damage by cranes occurs in mature wheat (Triticum aestivum) and barley (Hordeum vulgare), young shoots of alfalfa (Medicago sativa) and cereal grains, chilies (Capsicum annuum), and silage corn (Zea mays). Damage is related to proximity of crop fields to roost sites and timing of crane concentrations relative to crop maturity or vulnerability. The evolution of conflicts between farmers and cranes and current solutions are described for two areas of the Rocky Mountains used by staging, migrating, or wintering cranes: Grays Lake, Idaho, and the Middle Rio Grande Valley, New Mexico. In both areas, conflicts with growing crane populations were aggravated by losses of wetlands and cropland, proximity of crops to roosts and other wetland areas, changing crop types and practices, and increasing urbanization. At Grays Lake, fall-staging cranes damaged barley fields near an important breeding refuge as well as fields 15-50 km away. In the Middle Rio Grande Valley, migrating and wintering cranes damaged young alfalfa fields, chilies, and silage corn. Solutions in both areas have been addressed through cooperative efforts among federal and state agencies, that manage wetlands and croplands to increase food availability and carrying capacity on public lands, provide hazing programs for private landowners, and strategically target crane hunting to problem areas. Sustaining the success of these programs will be challenging. Areas important to Sandhill Cranes in the western United Sates experience continued loss of habitat and food resources due to urbanization, changes in agricultural crops and practices, and water-use conflicts, which threaten the abilities of both public and private landowners to manage wetlands and croplands for cranes. Conservation of habitats and water resources are important to support crane populations and minimize future conflicts with agriculture.

Conference Paper↗

USGS2004

Seismicity and tectonics of El Salvador

The large-scale plate-tectonics framework of El Salvador was defined in the “plate-tectonics revolution” of the 1960s and 1970s, but important issues related to seismic hazards depend on details that have been only recently, or are not yet, understood. Present evidence suggests that coupling across the interface-thrust zone beneath coastal El Salvador is sufficient to produce occasional interface-thrust earthquakes as large as M ∼8. The rate of such earthquakes is determined by the percentage of relative plate motion that is accumulated as elastic strain on the thrust-fault interface between the Cocos and Caribbean plates, which appears to be lower than in many other subduction zones, but is not well established. Earthquakes in the interior of the Cocos plate, such as the El Salvador earthquake of January 13, 2001, account for a significant percentage of Wadati-Benioff zone earthquakes. Separate consideration of the seismic hazard posed by, respectively, Cocos intraplate earthquakes and interface-thrust earthquakes is complicated by the difficulty of separating interface-thrust and Cocos intraplate events in earthquake catalogs. Earthquakes such as the San Vicente–San Salvador sequence of February 13–25, 2001, probably result from the motion of the Central American forearc northwestward with respect to the interior of the Caribbean plate; the geometry of the fault systems that accommodate the motion remains to be worked out. Understanding of this tectonic complexity and associated seismic hazards will be facilitated greatly by the long-term operation of high-sensitivity local seismograph networks, such as that operated by, and currently being upgraded by, the Servicio Nacional de Estudios Territoriales (SNET) of El Salvador.

Special Papers of the Geological Society of Americ↗

USGS2026

Whatever it takes— Shaping the L&O Letters Early Career Publication Honor to deliver true benefit

There are clear advantages for those who openly share their research. Publishing Open Access (OA) articles can increase author visibility (McCabe and Snyder 2014 ), improve productivity metrics (i.e., more diverse and higher citation rates; Huang et al. 2024 ; Piwowar et al. 2018 ), widen collaborative networks (Tai and Robinson 2018 ), and help secure future funding and/or comply with funder mandates (Herrmannova et al. 2019 ; Larivière and Sugimoto 2018 ; McKiernan et al. 2016 and references therein). These benefits can be vital for students and early career researchers (ECRs) trying to advance and thrive in academia. However, publishing papers in Gold OA journals such as L&O Letters comes at a notable financial cost, as these journals require that the corresponding author (or their organization or funder) pay a fee to make their published article immediately freely available to the public. These article processing charges can be prohibitively expensive (Fontúrbel and Vizentin-Bugoni 2021 ; Mekonnen et al. 2022 ; Ross-Hellauer et al. 2022 ). While Read and Publish agreements and waiver programs may be available to help cover these costs, these programs often exclude independent authors as well as those affiliated with ineligible or non-participating institutions (e.g., publisher waivers using the Research4Life eligibility criteria for access currently only allow authors from one of 13 South American countries/territories to publish free of charge). Besides the financial barrier, authors from underrepresented groups can also face a myriad of other publishing roadblocks, such as linguistic challenges (for speakers of English as a foreign language; Amano et al. 2023 ; Franco-Santos 2024 ; Ramírez-Castañeda 2020 ) and geopolitical-scientific bias (e.g., science conducted in the Global South being seen as less impactful and innovative than that conducted in the Global North; Ghosh 2022 ; Smits et al. 2025 ). For context, Global South (GS) and Global North (GN) are not geographic determinations (i.e., South and North hemispheres), but geopolitical classifications regarding a nation's level of development (underdeveloped, developing, or developed). For example: Australia and Brazil are both located in the southern hemisphere, but the former is considered as a Global North (developed) country and the latter as a Global South (underdeveloped or developing) country. When a subset of researchers is unable to openly publish their work, the diversity of voices represented in OA literature can decline (Williams et al. 2023 ). Loss of diversity is a loss to science, as diversity increases productivity, innovation, and scientific impact (refer to opening quote; Freeman and Huang 2014 ; AlShebli et al. 2018 ; Tomillo et al. 2022 ). To partially address the above-mentioned challenges and enable underfunded ECRs to publish their work in OA format, the biennial L&O Letters Early Career Publication Honor (ECPH) was established in 2020 by the ASLO Raelyn Cole Editorial (RCE) Fellows (Hotaling et al. 2022 ). Below we reflect on the benefits, outcomes, and scientific impact of the 2022 call and introduce the articles it helped publish in L&O Letters , which are bundled in this section of the ECPH Virtual Issue. Articles published in L&O Letters during other calls are available in their respective sections. We also refer the reader to six articles published by ECRs in other journals (not included in this Virtual Issue) whose content originally warranted their leading author an ECPH in 2022.

Limnology and Oceanography Letters↗

USGS1992

Toward digital geologic map standards: a progress report

Establishing modern scientific and technical standards for geologic maps and their derivative map products is vital to both producers and users of such maps as we move into an age of digital cartography. Application of earth-science data in complex geographic information systems, acceleration of geologic map production, and reduction of population costs require that national standards be developed for digital geologic cartography and computer analysis. Since December 1988, under commission of the Chief Geologic of the U.S. Geological Survey and the mandate of the National Geologic Mapping Program (with added representation from the Association of American State Geologists), a committee has been designing a comprehensive set of scientific map standards. Three primary issues were: (1) selecting scientific symbology and its digital representation; (2) creating an appropriate digital coding system that characterizes geologic features with respect to their physical properties, stratigraphic and structural relations, spatial orientation, and interpreted mode of origin; and (3) developing mechanisms for reporting levels of certainty for descriptive as well as measured properties. Approximately 650 symbols for geoscience maps, including present usage of the U.S Geological Survey, state geological surveys, industry, and academia have been identified and tentatively adopted. A proposed coding system comprises four-character groupings of major and minor codes that can identify all attributes of a geologic feature. Such a coding system allows unique identification of as many as 105 geologic names and values on a given map. The new standard will track closely the latest developments of the Proposed Standard for Digital Cartographic Data soon to be submitted to the National Institute of Standards and Technology by the Federal Interagency Coordinating Committee on Digital Cartography. This standard will adhere generally to the accepted definitions and specifications for spatial data transfer. It will require separate specifications of digital cartographic quality relating to positional accuracy and ranges of measured and interpreted values such as geologic age and rock composition. Provisional digital geologic map standards will be published for trial implementation. After approximately two years, when comments on the proposed standards have been solicited and modifications made, formal adoption of the standards will be recommended. Widespread acceptance of the new standards will depend on their applicability to the broadest range of earth-science map products and their adaptability to changing cartographic technology.

Conference Paper↗

USGS1964

Ground water in Fountain and Jimmy Camp Valleys, El Paso County, Colorado

The part of Fountain Valley considered in this report extends from Colorado Springs to the Pueblo County line. It is 23 miles long and has an area of 26 square miles. The part of Jimmy Camp Valley discussed is 11 miles long and has an area of 9 square miles. The topography is characterized by level flood plains and alluvial terraces that parallel the valley and by rather steep hills along the valley sides. The climate is semiarid, average annual precipitation being about 13 inches. Farming and stock raising are the principal occupations in the valleys; however, some of the agricultural land near Colorado Springs is being used for housing developments. The Pierre Shale and alluvium underlie most of the area, and mesa gravel caps the shale hills adjacent to Fountain Valley. The alluvium yields water to domestic, stock, irrigation, and public-supply wells and is capable of yielding large quantities of water for intermittent periods. Several springs issue along the sides of the valley at the contact of the mesa gravel and the underlying Pierre Shale. The water table ranges in depth from less than 10 feet along the bottom lands to about 80 feet along the sides of the valleys; the saturated thickness ranges from less than a foot to about 50 feet. The ground-water reservoir in Fountain Valley is recharged by precipitation that falls within the area, by percolation from Fountain Creek, which originates in the Pikes Peak, Monument Valley, and Rampart Range areas, and by seepage from irrigation water. This reservoir contains about 70,000 acre-feet of ground water in storage. The ground-water reservoir in Jimmy Camp Valley is recharged from precipitation that falls within the area, by percolation from Jimmy Camp Creek during periods of streamflow, and by seepage from irrigation water. The Jimmy Camp ground-water reservoir contains about 25,000 acre-feet of water in storage. Ground water is discharged from the area by movement to the south, by evaporation and transpiration in areas of shallow water table, by seepage into Fountain and Jimmy Camp Creeks, and through wells. About 3 to 4 mgd (million gallons per day) of ground water moves through the Fountain Valley alluvium at a velocity of about 15 feet per day. About 1 mgd of ground water moves through the Jimmy Camp Valley alluvium at a velocity of about 6 feet per day. Most of the wells in the area are drilled, but a few are dug. Many large-diameter wells are used for irrigation and public supply: one of the wells

Colorado↗

USGS1995

Acid Rain

Although acid rain is fading as a political issue in the United States and funds for research in this area have largely disappeared, the acidity of rain in the Eastern United States has not changed significantly over the last decade, and it continues to be a serious environmental problem. Acid deposition (commonly called acid rain) is a term applied to all forms of atmospheric deposition of acidic substances - rain, snow, fog, acidic dry particulates, aerosols, and acid-forming gases. Water in the atmosphere reacts with certain atmospheric gases to become acidic. For example, water reacts with carbon dioxide in the atmosphere to produce a solution with a pH of about 5.6. Gases that produce acids in the presence of water in the atmosphere include carbon dioxide (which converts to carbonic acid), oxides of sulfur and nitrogen (which convert to sulfuric and nitric acids}, and hydrogen chloride (which converts to hydrochloric acid). These acid-producing gases are released to the atmosphere through natural processes, such as volcanic emissions, lightning, forest fires, and decay of organic matter. Accordingly, precipitation is slightly acidic, with a pH of 5.0 to 5.7 even in undeveloped areas. In industrialized areas, most of the acid-producing gases are released to the atmosphere from burning fossil fuels. Major emitters of acid-producing gases include power plants, industrial operations, and motor vehicles. Acid-producing gases can be transported through the atmosphere for hundreds of miles before being converted to acids and deposited as acid rain. Because acids tend to build up in the atmosphere between storms, the most acidic rain falls at the beginning of a storm, and as the rain continues, the acids "wash out" of the atmosphere.

Conference Paper↗

USGS1985

The ground-water system and possible effects of underground coal mining in the Trail Mountain area, central Utah

The ground-water system was studied in the Trail Mountain area in order to provide hydrologic information needed to assess the hydrologic effects of underground coal mining. Well testing and spring data indicate that water occurs in several aquifers. The coal-bearing Blackhawk-Star Point aquifer is regional in nature and is the source of most water in underground mines in the region. One or more perched aquifers overlie the Blackhawk-Star Point aquifer in most areas of Trail Mountain. Aquifer tests indicate that the transmissivity of the Blackhawk-Star Point aquifer, which consists mainly of sandstone, siltstone, and shale, ranges from about 20 to 200 feet squared per day in most areas of Trail Mountain. The specific yield of the aquifer was estimated at 0.05, and the storage coefficient is about IxlO"6 per foot of aquifer where confined. The main sources of recharge to the multiaquifer system are snowmelt and rain, and water is discharged mainly by springs and by leakage along streams. Springs that issue from perched aquifers are sources of water for livestock and wildlife on Trail Mountain. Water in all aquifers is suitable for most uses. Dissolved solids concentrations range from about 250 to 700 milligrams per liter, and the predominant dissolved constituents generally are calcium, magnesium, and bicarbonate. Future underground coal mines will require dewatering when they penetrate the Blackhawk-Star Point aquifer. A finitedifference, three-dimensional computer model was used to estimate the inflow of water to various lengths and widths of a hypothetical dewatered mine and to estimate drawdowns of potentiometric surfaces in the partly dewatered aquifer. The estimates were made for a range of aquifer properties and premining hydraulic gradients that were similar to those on Trail Mountain. The computer simulations indicate that mine inflows could be several hundred gallons per minute and that potentiometric surfaces of the partly dewatered aquifer could be drawn down by several hundred feet during a reasonable life span of a mine. Because the Blackhawk-Star Point aquifer is separated from overlying perched aquifers by an unsaturated zone, mine dewatering alone would not affect perched aquifers. Mine dewatering would not significantly change water quality in the Blackhawk-Star Point aquifer. Subsidence will occur above future underground mines, but the effects on the ground-water system cannot be quantified. Subsidence fractures possibly could extend from the roof of a mine into a perched aquifer several hundred feet above. Such fractures would increase down ward percolation of water through the perching bed, and spring discharge from the perched aquifer could decrease. Flow through subsidence fractures also could increase recharge to the Blackhawk-Star Point aquifer and increase inflows to underground mines.

Utah↗

USGS2003

Human-induced contaminant impacts on migratory birds: Lessons from the North American eared grebe ( Podiceps nigricollis )

The effects of aquatic contaminants generated by soda ash mining processes on the North American eared grebe ( Podiceps nigricollis ) population illustrates important issues associated with human-induced habitat degradation on the health of migratory species. Eared grebes have been extensively studied in their staging and breeding habitats, but little is known about their 2- to 3-day migratory periods. During migration, few bodies of water are available to the birds for refuge between freshwater breeding areas in Canada and hypersaline lakes (e.g., Great Salt Lake in Utah or Mono Lake in California) to which they migrate. One geographic refuge area includes a series of "tailings" ponds associated with soda ash mining operations in southwestern Wyoming. The ponds range from 100-1200 acres, with water containing high concentrations of sodium decahydrate (Na 2 CO 3 •10H 2 O). At cool temperatures (generally < 40°F) sodium decahydrate precipitates out of the water and crystallizes on solid objects in the ponds or on the water surface. Bird mortality on these ponds has been recognized since the early 1970's, and the mining companies have developed hazing strategies and rehabilitation programs in order to minimize mortality. In order to determine causes of grebe mortality and devise strategies to reduce mortality, a field epidemiologic investigation was developed with the following objectives: 1) to determine whether eared grebes have quantifiable physiologic abnormalities associated with exposure to soda ash mine pond water; 2) to evaluate physical effects of sodium decahydrate crystallization on grebe survival; 3) to establish cause of death based on necropsy of deceased grebes; 4) to determine long-term survivability of eared grebes after exposure to the pond water; and 5) to evaluate water quality and determine whether aquatic invertebrates are present in the ponds as a possible food source.

California, Utah↗

USGS2025

The influence of pre-existing structures on geothermal springs: Inferences from potential field mapping in Surprise Valley, CA and other sites In the northwestern Great Basin

Surprise Valley, located in the northwestern Great Basin, is an asymmetric extensional basin that marks a major tectonic transition between the relatively un-extended volcanic Modoc Plateau to the west, and the Basin and Range to the east that has undergone 10-15% extension. In addition, it sits just north of the Walker Lane which accommodates up to 20% of dextral slip associated with Pacific-North American plate interactions. Thermal springs issue from eight areas within Surprise Valley. Most of these occur within the basin and are not situated on the main basin forming range-front faults. As a result, efforts to resolve the structural setting of the valley’s hydrothermal system have relied on geophysics to characterize basin structure and geology. Extensive efforts to map the basin with ground and airborne magnetics have revealed a >35 km-long linear, intra-basin magnetic high, interpreted as a buried dike swarm. Geothermal springs on the eastern side of the valley, including Seifert hot springs, Leonards hot springs, and Surprise Valley hot springs (SVHS), are all situated along the magnetic high and occur at local breaks and bends in the anomaly, suggesting that fracture permeability is enhanced along the feature and particularly at these discontinuities. Recent studies, including drilling over the anomaly near SVHS that likely intersected dike material, as well as subsequent mapping and sampling of dikes outcropping along the anomaly on the playa surface south of SVHS, confirm (as previously inferred) that mafic intrusives are the principal source of the anomaly. Similar interpretations made in two other valleys (in southern Oregon and northwestern Nevada), where inferred intra-basin dikes appear to be spatially correlated with hot springs or prospective geothermal resource areas, suggest that the impact of pre-existing basement structure on hydrothermal activity may pertain more generally to other hydrothermal settings throughout the Great Basin. If so, efforts to map basement may enhance understanding structural controls on some geothermal systems. Furthermore, similarities across these disparate sites suggest that magmatism may play a much larger role in accommodating extension and influencing basin evolution across the western Great Basin than previously recognized.

Conference Paper↗

USGS2003

Tidal wetland fluxes of dissolved organic carbon and sediment at Browns Island, California: initial evaluation

Carbon and sediment fluxes from tidal wetlands are of increasing concern in the Sacramento-San Joaquin River Delta (Delta), because of drinking water issues and habitat restoration efforts. Certain forms of dissolved organic carbon (DOC) react with disinfecting chemicals used to treat drinking water, to form disinfection byproducts (DBPs), some of which are potential carcinogens. The contribution of DBP precursors by tidal wetlands is unknown. Sediment transport to and from tidal wetlands determines the potential for marsh accretion, thereby affecting habitat formation. Water, carbon, and sediment flux were measured in the main channel of Browns Island, a tidal wetland located at the confluence of Suisun Bay and the Delta. In-situ instrumentation were deployed between May 3 and May 21, 2002. Water flux was measured using acoustic Doppler current profilers and the index-velocity method. DOC concentrations were measured using calibrated ultraviolet absorbance and fluorescence instruments. Suspended-sediment concentrations were measured using a calibrated nephelometric turbidity sensor. Tidally averaged water flux through the channel was dependent on water surface elevations in Suisun Bay. Strong westerly winds resulted in higher water surface elevations in the area east of Browns Island, causing seaward flow, while subsiding winds reversed this effect. Peak ebb flow transported 36% more water than peak flood flow, indicating an ebb-dominant system. DOC concentrations were affected strongly by porewater drainage from the banks of the channel. Peak DOC concentrations were observed during slack after ebb, when the most porewater drained into the channel. Suspended-sediment concentrations were controlled by tidal currents that mobilized sediment from the channel bed, and stronger tides mobilized more sediment than the weaker tides. Sediment was transported mainly to the island during the 2-week monitoring period, though short periods of export occurred during the spring tide. Future deployments will characterize the seasonal variability of these fluxes.

California↗

USGS2015

Applications of optical sensors for high-frequency water-quality monitoring and research

The recent commercial availability of in-situ optical sensors, together with new techniques for data collection and analysis, provides the opportunity to monitor a wide range of water-quality constituents over time scales during which environmental conditions actually change. Traditional approaches for data collection (daily to monthly discrete samples) are often limited by high sample collection, processing, and analytical costs, difficult site access, and logistical challenges, particularly for long-term sampling at a large number of sites. Optical sensors that continuously measure constituents in the environment by absorbance or fluorescence properties (Figure 1) have had a long history of use in oceanography for measuring highly resolved concentrations and fluxes of organic matter, nutrients, and algal material. However, much of the work using commercially-available optical sensors in rivers and streams has taken place in only the last few years. Figure 1. [NOT SHOWN] Optical sensor technology is now sufficiently developed to warrant broader application for research and monitoring in coastal and freshwater systems, and the United States Geological Survey (a U.S. science agency) is now using these sensors in a variety of research and monitoring programs to better understand water quality in-situ and in real-time. Examples are numerous and range from the applications of nitrate sensors for calculating loads to estuaries susceptible to hypoxia (Pellerin et al., 2014) to the use of fluorometers to estimate methymercury fluxes (Bergamaschi et al., 2011) and disinfection byproduct formation (Carpenter et al., 2013). Transmitting these data in real-time provides information that can be used for early trend detection, help identify monitoring gaps critical for water management, and provide science-based decision support across a range of issues related to water quality, freshwater ecosystems, and human health. Despite the value of these sensors, collecting data that meet high-quality standards requires investment in and adherence to tested and established methods and protocols for sensor operation and data management (Pellerin et al., 2013). For example, optical sensor measurements can be strongly influenced by a variety of matrix effects, including water temperature, inner filtering from highly colored water, and scattering of light by suspended particles (Downing et al., 2012). Characterizing and correcting sensors for these effects – as well as the continued development of common methodologies and protocols for sensor use – will be critical to ensuring comparable measurements across sites and over time. In addition, collaborative efforts such as the Nutrient Sensor Challenge (www.nutrients-challenge.org) will continue to accelerate the development, production and use of affordable, reliable and accurate sensors for a range of environments. REFERENCES Bergamaschi .B.A., Fleck J.A., Downing B.D., Boss E., Pellerin B.A., Ganju N.K., Schoellhamer D.H., Byington A.A., Heim W.A., Stephenson M., Fujii R. (2011), Methyl mercury dynamics in a tidal wetland quantified using in situ optical measurements. Limnology and Oceanography, 56(4): 1355-1371. Carpenter K.D., Kraus T.E.C., Goldman J.H., Saraceno J., Downing B.D., Bergamaschi B.A., McGhee G., Triplett T. (2013), Sources and Characteristics of Organic Matter in the Clackamas River, Oregon, Related to the Formation of Disinfection By-products in Treated Drinking Water: U.S. Geological Survey Scientific Investigations Report 2013–5001, 78 p. Downing .B.D., Pellerin B.A., Bergamaschi B.A., Saraceno J., Kraus T.E.K. (2012), Seeing the light: The effects of particles, temperature and inner filtering on in situ CDOM fluorescence in rivers and streams. Limnology and Oceanography: Methods, 10: 767-775. Pellerin B.A., Bergamaschi B.A., Downing B.D., Saraceno J., Garrett J.D., Olsen L.D. (2013), Optical Techniques for the Determination of Nitrate in En

Conference Paper↗

USGS2017

Tin

Tin (Sn) is one of the first metals to be used by humans. Almost without exception, tin is used as an alloy. Because of its hardening effect on copper, tin was used in bronze implements as early as 3500 B.C. The major uses of tin today are for cans and containers, construction materials, transportation materials, and solder. The predominant ore mineral of tin, by far, is cassiterite (SnO 2 ). In 2015, the world’s total estimated mine production of tin was 289,000 metric tons of contained tin. Total world reserves at the end of 2016 were estimated to be 4,700,000 metric tons. China held about 24 percent of the world’s tin reserves and accounted for 38 percent of the world’s 2015 production of tin. The proportion of scrap used in tin production is between 10 and 25 percent. Unlike many metals, tin recycling is relatively efficient, and the fraction of tin in discarded products that get recycled is greater than 50 percent. Only about 20 percent of the world’s identified tin resources occur as primary hydrothermal hard-rock veins, or lodes. These lodes contain predominantly high-temperature minerals and almost invariably occur in close association with silicic, peraluminous granites. About 80 percent of the world’s identified tin resources occur as unconsolidated secondary or placer deposits in riverbeds and valleys or on the sea floor. The largest concentration of both onshore and offshore placers is in the extensive tin belt of Southeast Asia, which stretches from China in the north, through Thailand, Burma (also referred to as Myanmar), and Malaysia, to the islands of Indonesia in the south. Furthermore, tin placers are almost always found closely allied to the granites from which they originate. Other countries with significant tin resources are Australia, Bolivia, and Brazil. Most hydrothermal tin deposits belong to what can be thought of as a superclass of porphyry-greisen deposits. The hydrothermal tin deposits are all characterized by a close spatial, temporal, and genetic association with highly differentiated, peraluminous porphyritic granite intrusions. The intrusions form pegmatites; disseminated ore; parallel or subparallel, greisen-bordered sheeted veins that either cross-cut the intrusion or are peripheral to it; skarns; and (or) limestone replacements that contain different amounts of cassiterite, molybdenite, and wolframite. The tectonic settings of tin-bearing granites are relatively well understood and of limited variety. Tin and tungsten deposits and their associated igneous rocks are found mainly in continental settings. Historically, prospecting for tin has been carried out by the time-honored methods of panning, drilling, trenching, and assaying. Geophysical and geochemical surveys have been employed to cover large areas more rapidly, isolating areas of possible tin deposits so that drilling can be more effective and less costly. Elemental concentrations and relationships of the lithophile elements, especially barium, lithium, niobium, potassium, rubidium, and zirconium, are the most reliable chemical indicators of ore-forming processes and tin-bearing potential. The average human diet includes an intake of about 10 milligrams per day of tin. Ingestion of tin in significantly greater amounts than 10 milligrams per day may lead to a stomach ache, anemia, and liver and kidney problems. Exposure to some organo-tin compounds can interfere with brain and nervous system function and, in severe cases, can cause death. Extended inhalation of tin oxide—an issue mainly for those people who work in the tin industry—results in a higher potential to develop stannosis, which is a mild disease of the lungs caused by the inhalation of tin-bearing dust. Inorganic tin is poorly absorbed by the body, and no evidence exists for the carcinogenicity of metallic tin and tin compounds in humans. Most placer tin deposits are mined by open pit and (or) dredging methods. Mining of alluvial placers in modern streambeds and riverbeds is likely to increase the amount of sediment delivered downstream. This, combined with potential diversion of rivers and streams, may negatively affect downstream ecosystems. Many of the placer deposits located in Burma, Indonesia, Malaysia, and Thailand are located offshore. Most offshore placer tin deposits are mined by dredging methods, which have the potential to negatively affect benthic, midwater, and pelagic ecosystems. In a congressionally mandated U.S. Department of Defense study of strategic minerals published in 2013, tin has the greatest shortfall amount (insufficient supply to meet demand) at \$416 million; this amount is more than twice that of antimony ($182 million), which is the strategic mineral with the next largest shortfall amount (U.S. Department of Defense, 2013). The United States imported 75 percent of its tin supply in 2015. During the period 2012–15, these imports were from, in descending order of amount imported, Peru, Indonesia, Malaysia, and Bolivia. A promising advancement concerning research into the origin of tin deposits is the recent development of a reliable method of analyzing tin isotopes in cassiterite. Although the mechanism of transport and deposition of tin is fairly well understood, the means by which tin is incorporated into the parent magma at the points of magma generation and ascent needs further investigation. Tin metallogenic provinces worldwide are well known. Consequently, any undiscovered tin deposits will likely be spatially close to known deposits or extensions of the same.

Professional Paper↗

USGS1996

Meeting summary - Coastal meteorology and oceanography: Report of the third prospectus development team of the U.S. Weather Research Program to NOAA and NSF

U.S. Weather Research Program (USWRP) prospectus development teams (PDTs) are small groups of scientists that are convened by the USWRP lead scientist on a one-time basis to discuss critical issues and to provide advice related to future directions of the program. PDTs are a principal source of information for the Science Advisory Committee, which is a standing committee charged with the duty of making recommendations to the Program Office based upon overall program objectives. PDT-1 focused on theoretical issues, and PDT-2 on observational issues; PDT-3 is the first of several to focus on more specialized topics. PDT-3 was convened to identify forecasting problems related to U.S. coastal weather and oceanic conditions, and to suggest likely solution strategies. There were several overriding themes that emerged from the discussion. First, the lack of data in and over critical regions of the ocean, particularly in the atmospheric boundary layer, and the upper-ocean mixed layer were identified as major impediments to coastal weather prediction. Strategies for data collection and dissemination, as well as new instrument implementation, were discussed. Second, fundamental knowledge of air-sea fluxes and boundary layer structure in situations where there is significant mesoscale variability in the atmosphere and ocean is needed. Companion field studies and numerical prediction experiments were discussed. Third, research prognostic models suggest that future operational forecast models pertaining to coastal weather will be high resolution and site specific, and will properly treat effects of local coastal geography, orography, and ocean state. The view was expressed that the exploration of coupled air-sea models of the coastal zone would be a particularly fruitful area of research. PDT-3 felt that forecasts of land-impacting tropical cyclones, Great Lakes-affected weather, and coastal cyclogenesis, in particular, would benefit from such coordinated modeling and field efforts. Fourth, forecasting for Arctic coastal zones is limited by our understanding of how sea ice forms. The importance of understanding air-sea fluxes and boundary layers in the presence of ice formation was discussed. Finally, coastal flash flood forecasting via hydrologic models is limited by the present accuracy of measured and predicted precipitation and storm surge events. Strategies for better ways to improve the latter were discussed.

Conference Paper↗

USGS2006

Water-quality characteristics and contaminants in the rural karst-dominated Spring Mill Lake watershed, southern Indiana

The Spring Mill Lake watershed is located in the Mitchell Plateau, a karst area that developed on Mississippian carbonates in southern Indiana. Spring Mill Lake is a reservoir built in the late 1930s and is located in Spring Mill State Park. Within the park, groundwater from subsurface conduits issues as natural springs and then flows in surface streams to the lake. From 1998 to 2002, surface and subsurface hydrology and water quality were investigated to determine the types and sources of potential contaminants entering the lake. Water samples collected during base flow and a February 2000 storm event were analyzed for selected cations, anions, trace elements, selected U.S. Environmental Protection Agency (EPA) primary and secondary drinkingwater contaminants, nitrogen isotopes, suspended solids, Escherichia coli, and pesticides. All of the water samples met the EPA drinking-water standards for inorganic constituents, except those collected at five sites in August 1999 during a drought. Nitrate nitrogen (NO 3 -N) concentrations were highest during base-flow conditions and displayed a dilutional trend during peak-flow periods. The NO 3 -N concentrations in water samples collected during the 2001 spring fertilizer applications tended to increase from early to late spring. All of the ?? 15 N values were low, which is indicative of either an inorganic source or soil organic matter. Storm discharge contained increased concentrations of total suspended solids; thus, storms are responsible for most of the sediment accumulation in the lake. E. coli levels in 24% of the samples analyzed contained a most probable number (MPN) greater than 235/100 mL, which is the maximum acceptable level set for recreational waters in Indiana. E. coli does appear to be a potential health risk, particularly at Rubble spring. The sources of E. coli found at this spring may include barnyard runoff from a horse barn or wastes from a wastewater treatment facility. The pesticides atrazine, metolachlor, acetochlor, and simazine were detected during the spring of 2001. Atrazine, metolachlor, acetochlor, and simazine are used to suppress weeds during corn and soybean production. Additional sources of atrazine and simazine may result from application to right-of-ways, orchards, and managed forest areas. ?? 2006 Geological Society of America.

Special Paper of the Geological Society of America↗