USGS Science⌕ Search

SEARCH · USGS Science

Results for “Energies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources
USGS2006

An overview of the global variability in radiated energy and apparent stress

a global study of radiated seismic energies ER and apparent stresses τ a reveals systematic patterns. earthquakes with the highest apparent stress occur in regions of intense deformation and rupture strong lithosphere. in oceanic settings, these are strike-slip earthquakes (τ a up to 27 Mpa) occurring intraplate or at evolving ends of transform faults. at subduction zones and intracontinental settings, these are strike slip earthquakes with τ a up to 7 Mpa. normal-fault earthquakes exhibit a more complex pattern. higher τ a ’s (up to5Mpa) are found for intraslab events at depths from 35 to 70 km that occur near zones of intense deformation such as a sharp slab bend or the juncture of colliding slabs. lower τ a ’s (< 1 Mpa) are found for normal-fault earthquakes at the outer rise and outer trench wall or deep in flat warm slabs. the lowest average τ a (0.3 Mpa) is found for thrust-fault earthquakes at subduction zones. the variation of average apparent stress with tectonics suggests a relationship with lithospheric strength and fault maturity. Mature faults, such as plate boundaries that have experienced large cumulative slip, appear to have low strength and tend to yield earthquakes with low apparent stresses. immature faults, in contrast, are stronger and yield high apparent stresses because either they are the result of fresh-rock fracture or at least their cumulative fault slip is quite small. these results have implications of use to the seismic engineering community because ER and its magnitude counterpart Me are reliable indicators of the potential for damaging ground motion.

Book chapter↗
USGS2007

Reducing energy-related CO 2 emissions using accelerated weathering of limestone

The use and impacts of accelerated weathering of limestone (AWL; reaction: CO 2 +H 2 O+CaCO 3 →Ca 2+ +2(HCO 3 - ) is explored as a CO 2 capture and sequestration method. It is shown that significant limestone resources are relatively close to a majority of CO 2 -emitting power plants along the coastal US, a favored siting location for AWL. Waste fines, representing more than 20% of current US crushed limestone production (>10 9 tonnes/yr), could provide an inexpensive or free source of AWL carbonate. With limestone transportation then as the dominant cost variable, CO 2 mitigation costs of $3-$4/tonne appear to be possible in certain locations. Perhaps 10–20% of US point–source CO 2 emissions could be mitigated in this fashion. It is experimentally shown that CO 2 sequestration rates of 10 -6 to 10 -5 moles/sec per m 2 of limestone surface area are achievable, with reaction densities on the order of 10 -2 tonnes CO 2 m -3 day -1 , highly dependent on limestone particle size, solution turbulence and flow, and CO 2 concentration. Modeling shows that AWL would allow carbon storage in the ocean with significantly reduced impacts to seawater pH relative to direct CO 2 disposal into the atmosphere or sea. The addition of AWL-derived alkalinity to the ocean may itself be beneficial for marine biota.

Energy↗
USGS2022

Assessing vegetation recovery from energy development using a dynamic reference approach

Ecologically relevant references are useful for evaluating ecosystem recovery, but references that are temporally static may be less useful when environmental conditions and disturbances are spatially and temporally heterogeneous. This challenge is particularly acute for ecosystems dominated by sagebrush ( Artemisia spp.), where communities may require decades to recover from disturbance. We demonstrated application of a dynamic reference approach to studying sagebrush recovery using three decades of sagebrush cover estimates from remote sensing (1985–2018). We modelled recovery on former oil and gas well pads ( n = 1200) across southwestern Wyoming, USA, relative to paired references identified by the Disturbance Automated Reference Toolset. We also used quantile regression to account for unmodelled heterogeneity in recovery, and projected recovery from similar disturbance across the landscape. Responses to weather and site-level factors often differed among quantiles, and sagebrush recovery on former well pads increased more when paired reference sites had greater sagebrush cover. Little (<5%) of the landscape was projected to recover within 100 years for low to mid quantiles, and recovery often occurred at higher elevations with cool and moist annual conditions. Conversely, 48%–78% of the landscape recovered quickly (within 25 years) for high quantiles of sagebrush cover. Our study demonstrates advantages of using dynamic reference sites when studying vegetation recovery, as well as how additional inferences obtained from quantile regression can inform management.

Wyoming↗
USGS2026

Beach nourishment morphodynamics in a high-energy U.S. West Coast environment

Dredged sediment from engineered inlets can be used to nourish coastlines adjacent to these inlets, serving as a beneficial alternative to offshore disposal. Effective strategies for beneficial use of dredged sediment, however, rely on understanding of local sediment transport. A beach nourishment project utilizing dredged sand was carried out at a highly energetic beach north of the Columbia River mouth (Washington, USA). Within two weeks of placement, during a moderately energetic period, a large part of the beach nourishment had eroded. To predict local hydro- and morphodynamics there, a XBeach model was used, validated with field observations of nearshore hydrodynamics and morphology. It showed that while the subaerial nourishment eroded rapidly, it is likely that the sediment is deposited around the inner bar and is still available to the morphological system of Benson Beach. Additionally, model simulations suggest the nourishment provided a buffer against erosion of the local dune system during its presence.

Washington↗
USGS1987

Wind energy development in California, USA

Windfarms have been developed rapidly in California in the last few years. The impetus has been a legislated goal to generate 10% of California's electricity by windpower by the year 2000, and generous state and federal tax incentives. Windpower is promoted as environmentally benign, which it is in traditional uses. The California program, however, is not traditional: it calls for centralized development of a magnitude sufficient to offset significant amounts of fossil fuels now used to generate electricity. Centralized windfarm development, as exemplified by the Altamont Pass, Tehachapi Mountains, and San Gorgonio Pass developments, involves major road building projects in erosion-sensitive terrain, effective closure of public lands, and other detrimental effects. A windfarm consisting of 200 turbines with 17-m rotors located in steep terrain 16 km from an existing corridor might occupy 235 ha and physically disturb 86 ha. With average annual wind speeds of 22.5 km/h, the farm would generate about 10??106 kWh/year at present levels of capacity. This annual production would offset 1% of one day's consumption of oil in California. To supply 10% of the state's electricity (at 1984 production rates) would require about 600,000 turbines of the type in common use today and would occupy more than 685,000 ha. It is likely that indirect effects would be felt in much larger areas and would include increased air and water pollution resulting from accelerated erosion, degradation of habitat of domestic and wild animals, damage to archaeological sites, and reduction of scenic quality of now-remote areas of the state. ?? 1987 Springer-Verlag New York Inc.

Environmental Management↗
USGS1993

Descriptive models of major uranium deposits in China - Some results of the Workshop on Uranium Resource Assessment sponsored by the International Atomic Energy Agency, Vienna, Austria, in cooperation with China National Nuclear Corporation, Beijing, and the U.S. Geological Survey, Denver, Colorado, and Reston, Virginia

Four major types of uranium deposits occur in China: granite, volcanic, sandstone, and carbonaceous-siliceous-pelitic rock. These types are major sources of uranium in many parts of the world and account for about 95 percent of Chinese production. Descriptive models for each of these types record the diagnostic regional and local geologic features of the deposits that are important to genetic studies, exploration, and resource assessment. A fifth type of uranium deposit, metasomatite, is also modeled because of its high potential for production. These five types of uranium deposits occur irregularly in five tectonic provinces distributed from the northwest through central to southern China. ?? 1993 Oxford University Press.

Nonrenewable Resources↗
USGS2015

Unconventional energy resources: 2015 review. Shale gas and liquids

Introduction As the source rocks from which petroleum is generated, organic-rich shales have always been considered an important component of petroleum systems. Over the last few years, it has been realized that in some mudrocks, sufficient hydrocarbons remain in place to allow for commercial development, although advanced drilling and completion technology is typically required to access hydrocarbons from these reservoirs. Tight oil reservoirs (also referred to as continuous oil accumulations) contain hydrocarbons migrated from source rocks that are geologically/stratigraphically interbedded with or occur immediately overlying/underlying them. Migration is minimal in charging these tight oil accumulations (Gaswirth and Marra 2014 ). Companies around the world are now successfully exploiting organic-rich shales and tight rocks for contained hydrocarbons, and the search for these types of unconventional petroleum reservoirs is growing. Unconventional reservoirs range in geologic age from Ordovician to Tertiary (Silverman et al. 2005 ; EIA 2013a ).

Natural Resources Research↗
USGS2014

Development of the Coastal Storm Modeling System (CoSMoS) for predicting the impact of storms on high-energy, active-margin coasts

The Coastal Storm Modeling System (CoSMoS) applies a predominantly deterministic framework to make detailed predictions (meter scale) of storm-induced coastal flooding, erosion, and cliff failures over large geographic scales (100s of kilometers). CoSMoS was developed for hindcast studies, operational applications (i.e., nowcasts and multiday forecasts), and future climate scenarios (i.e., sea-level rise + storms) to provide emergency responders and coastal planners with critical storm hazards information that may be used to increase public safety, mitigate physical damages, and more effectively manage and allocate resources within complex coastal settings. The prototype system, developed for the California coast, uses the global WAVEWATCH III wave model, the TOPEX/Poseidon satellite altimetry-based global tide model, and atmospheric-forcing data from either the US National Weather Service (operational mode) or Global Climate Models (future climate mode), to determine regional wave and water-level boundary conditions. These physical processes are dynamically downscaled using a series of nested Delft3D-WAVE (SWAN) and Delft3D-FLOW (FLOW) models and linked at the coast to tightly spaced XBeach (eXtreme Beach) cross-shore profile models and a Bayesian probabilistic cliff failure model. Hindcast testing demonstrates that, despite uncertainties in preexisting beach morphology over the ~500 km alongshore extent of the pilot study area, CoSMoS effectively identifies discrete sections of the coast (100s of meters) that are vulnerable to coastal hazards under a range of current and future oceanographic forcing conditions, and is therefore an effective tool for operational and future climate scenario planning.

Natural Hazards↗
USGS2025

Reduction of red bed sedimentary rocks in connection with energy metal ore formation: A case study from the Sinbad seep, Mesa County, Colorado

The Paradox Basin’s Sinbad seep is a modern analog for ancient bleaching of red bed sediments by introduced alkaline, reducing brines. This bleaching, involving reductive alteration of former red beds, is essential ground preparation that enables the altered rocks to trap Cu, U, and V from later oxidized fluids, forming ore deposits. Study of Sinbad thus offers insights into these metallic mineralization processes in the Paradox and other sedimentary basins. The Sinbad seep occurs where shallow groundwater interacts with organic-rich petroleum source rocks, flows up a fault, and discharges into Salt Creek. Ratios of Na/Cl, Na/Br, and Cl/Br, plus high sulfate concentrations, indicate that the salinity of the seep water originated from dissolution of halite and gypsum during topographically driven flow of meteoric water across a diapir of the Pennsylvanian Paradox Formation, rather than from deep basinal brines. In contact with the organic-rich shales of the Paradox, these SO 4 -rich waters become reduced through bacterial reduction, producing H 2 S. The waters react with red beds of the Permian Cutler Formation, causing pervasive bleaching. The bleaching at Sinbad is characterized by iron-conservative reduction of ferric iron in diagenetic hematite and detrital ilmenite and magnetite to Fe sulfides. The ferrous iron is retained in these sulfides likely as sorbed Fe. Associated alteration includes precipitation of quartz and feldspar overgrowths, partial dissolution of detrital quartz and feldspar caused by pressure solution, formation of clay and authigenic rutile, and precipitation of carbonate and gypsum. The Fe sulfides rapidly degenerate to a mixture of jarosite and iron oxides on weathering at the surface. Among the major-oxide elements and most trace elements, there is no statistical difference between unbleached and bleached samples. The exceptions are uranium and sulfur, which are somewhat greater in bleached samples. Fission track radiography illuminates that uranium is preferentially concentrated in iron oxide cements, iron sorbed into detrital clasts, and finely disseminated iron oxide in illite cement in bleached samples. A leaching experiment suggests that uranium may be more easily available for mobilization from rocks that have undergone bleaching alteration, making them potential U sources. In addition, bleached rocks form effective traps for U, V, and some Cu mineralization.

Colorado↗
USGS1992

Triton's surface-atmosphere energy balance

We explore the energetics of Triton's surface-atmosphere system using a model that includes the turbulent transfer of sensible heat as well as insolation, reradiation, and latent heat transport. The model relies on a 1° by 1° resolution hemispheric bolometric albedo map of Triton for determining the atmospheric temperature, the N 2 frost emissivity, and the temperatures of unfrosted portions of the surface consistent with a frost temperature of ≅38 K. For a physically plausible range of heat transfer coefficients, we find that the atmospheric temperature roughly 1 km above the surface is approximately 1 to 3 K hotter than the surface. Atmospheric temperatures of 48 K suggested by early analysis of radio occultation data cannot be obtained for plausible values of the heat transfer coefficients. Our calculations indicate that Triton's N 2 frosts must have an emissivity well below unity in order to have a temperature of ≅38 K, consistent with previous results. We also find that convection over small hot spots does not significantly cool them off, so they may be able to act as continous sources of buoyancy for convective plumes, but have not explored whether the convection is vigorous enough to entrain particulate matter thereby forming a dust devil. Our elevated atmospheric temperatures make geyser driven plumes with initial upward velocities ≤10 m s −1 stagnate in the lower atmosphere. These “wimpy” plumes provide a possible explanation for Triton's “wind streaks.”

Icarus↗
USGS1989

Non-energy minerals and surficial geology of the continental margin of Maryland

The surficial sediments have been mapped and the shallow geologic framework outlined of the Maryland inner continental shelf. The initial study encompassed a small area offshore of Assateague Island but was extended northward to include the Ocean City area and eastward across several linear shoals. The surficial sediments are predominantly sand with mean grain sizes ranging from 0.40 to 2.89∅. Mud and gravel are the mappable components of the surficial sediments. Muds are distributed along a N-S-trending band seaward of the shoreface. Gravels are mapped farther offshore in 18–22 m of water. Four distinct seismic units are identified from seismic reflection profiles. The lowermost unit, T1, exhibits high-angle clinoforms truncated at the top by a locally prominent near-horizontal reflector. Above this reflector are concordant strata with parallel to subparallel bedding designated as Q2. Incised into Q2 is an extensive channel, Q3, that trends both coast-parallel and coast-normal. The upper unit, Q4, overlaps portions of units Q2 and Q3 along the eastward edges of the study area and is represented in the nearshore by (Holocene inlet?) channeling adjacent to the shoreface. Note that this excludes the modern shelf and “sheet”.

Marine Geology↗
USGS1991

A microcomputer program for energy assessment and aggregation using the triangular probability distribution

A general risk-analysis method was developed for petroleum-resource assessment and other applications. The triangular probability distribution is used as a model with an analytic aggregation methodology based on probability theory rather than Monte-Carlo simulation. Among the advantages of the analytic method are its computational speed and flexibility, and the saving of time and cost on a microcomputer. The input into the model consists of a set of components (e.g. geologic provinces) and, for each component, three potential resource estimates: minimum, most likely (mode), and maximum. Assuming a triangular probability distribution, the mean, standard deviation, and seven fractiles (F100, F95, F75, F50, F25, F5, and F0) are computed for each component, where for example, the probability of more than F95 is equal to 0.95. The components are aggregated by combining the means, standard deviations, and respective fractiles under three possible siutations (1) perfect positive correlation, (2) complete independence, and (3) any degree of dependence between these two polar situations. A package of computer programs named the TRIAGG system was written in the Turbo Pascal 4.0 language for performing the analytic probabilistic methodology. The system consists of a program for processing triangular probability distribution assessments and aggregations, and a separate aggregation routine for aggregating aggregations. The user's documentation and program diskette of the TRIAGG system are available from USGS Open File Services. TRIAGG requires an IBM-PC/XT/AT compatible microcomputer with 256kbyte of main memory, MS-DOS 3.1 or later, either two diskette drives or a fixed disk, and a 132 column printer. A graphics adapter and color display are optional. ?? 1991.

Computers & Geosciences↗