USGS Science⌕ Search

SEARCH · USGS Science

Results for “Coastal Sediments”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources
USGS2024

Modeled coastal-ocean pathways of land-sourced contaminants in the aftermath of Hurricane Florence

Extreme precipitation during Hurricane Florence, which made landfall in North Carolina in September 2018, led to breaches of hog waste lagoons, coal ash pits, and wastewater facilities. In the weeks following the storm, freshwater discharge carried pollutants, sediment, organic matter, and debris to the coastal ocean, contributing to beach closures, algae blooms, hypoxia, and other ecosystem impacts. Here, the ocean pathways of land-sourced contaminants following Hurricane Florence are investigated using the Regional Ocean Modeling System (ROMS) with a river point source with fixed water properties from a hydrologic model (WRF-Hydro) of the Cape Fear River Basin, North Carolina's largest watershed. Patterns of contaminant transport in the coastal ocean are quantified with a finite duration tracer release based on observed flooding of agricultural and industrial facilities. A suite of synthetic events also was simulated to investigate the sensitivity of the river plume transport pathways to river discharge and wind direction. The simulated Hurricane Florence discharge event led to westward (downcoast) transport of contaminants in a coastal current, along with intermittent storage and release of material in an offshore (bulge) or eastward (upcoast) region near the river mouth, modulated by alternating upwelling and downwelling winds. The river plume patterns led to a delayed onset and long duration of contaminants affecting beaches 100 km to the west, days to weeks after the storm. Maps of the onset and duration of hypothetical water quality hazards for a range of weather conditions may provide guidance to managers on the timing of swimming/shellfishing advisories and water quality sampling.

Journal of Geophysical Research: Oceans↗
USGS2010

Archive of Sediment Data Collected around the Chandeleur Islands and Breton Island in 2007 and 1987 (Vibracore Surveys: 07SCC04, 07SCC05, and 87039)

In 2006 and 2007, the U.S. Geological Survey (USGS) and collaborators at the University of New Orleans (UNO) collected high-resolution seismic profiles and subsurface cores around the Chandeleur and Breton Islands, Louisiana (Study Area Map). To ground-truth the acoustic seismic surveys conducted in 2006, 124 vibracores were acquired during the 07SCC04 and 07SCC05 cruises in 2007. These cores were collected within the back-barrier, nearshore, and offshore environments. The surveys were conducted as part of a post-hurricane assessment and sediment resource inventory for the Barrier Island Coastal Monitoring (BICM) project. Vibracores were collected offshore using the USGS R/V G.K. Gilbert, while the terrestrial, back-barrier, and nearshore vibracores were collected from the UNO R/V Greenhead. This report serves as an archive of sediment data from two concurrent vibracore surveys (cruises 07SCC04 and 07SCC05) from around the Breton and Chandeleur Islands in 2007 and also documents sediment data from vibracores collected offshore of the Chandeleur Islands in 1987 (cruise 87039). The 1987 vibracores were collected through the collaborated efforts of the USGS, Louisiana Geological Survey (LGS), and Alpine Ocean Seismic. Each vibracore can be identified by cruise and core number.

Data Series↗
USGS2011

Prediction and assimilation of surf-zone processes using a Bayesian network: Part I: Forward models

Prediction of coastal processes, including waves, currents, and sediment transport, can be obtained from a variety of detailed geophysical-process models with many simulations showing significant skill. This capability supports a wide range of research and applied efforts that can benefit from accurate numerical predictions. However, the predictions are only as accurate as the data used to drive the models and, given the large temporal and spatial variability of the surf zone, inaccuracies in data are unavoidable such that useful predictions require corresponding estimates of uncertainty. We demonstrate how a Bayesian-network model can be used to provide accurate predictions of wave-height evolution in the surf zone given very sparse and/or inaccurate boundary-condition data. The approach is based on a formal treatment of a data-assimilation problem that takes advantage of significant reduction of the dimensionality of the model system. We demonstrate that predictions of a detailed geophysical model of the wave evolution are reproduced accurately using a Bayesian approach. In this surf-zone application, forward prediction skill was 83%, and uncertainties in the model inputs were accurately transferred to uncertainty in output variables. We also demonstrate that if modeling uncertainties were not conveyed to the Bayesian network (i.e., perfect data or model were assumed), then overly optimistic prediction uncertainties were computed. More consistent predictions and uncertainties were obtained by including model-parameter errors as a source of input uncertainty. Improved predictions (skill of 90%) were achieved because the Bayesian network simultaneously estimated optimal parameters while predicting wave heights.

Coastal Engineering↗
USGS2012

Feedbacks between inundation, root production, and shoot growth in a rapidly submerging brackish marsh

1. Ecogeomorphic feedbacks between mineral sediment deposition and above-ground plant growth are thought to have dominated the evolution of many coastal ecosystems and landforms. However, land-use-related reductions in sediment delivery rates to estuaries world-wide suggest that these above-ground feedbacks may not apply in some of the world's most vulnerable coastal landscapes. 2. To understand the relationships between sea level rise and marsh survival, we measured root and shoot growth over experimentally manipulated elevations in a rapidly submerging, sediment deficient marsh. 3. Root growth was highest at a distinct optimum elevation in both Schoenoplectus americanus and Spartina patens . S. americanus shoot growth was highest at an optimum elevation, but S. patens shoot growth increased with elevation throughout the intertidal zone. 4. For marsh elevations that are higher than optimum (expected at low sea level rise rates), we propose that an acceleration in the rate of sea level rise will lead to enhanced root growth, organic accretion and wetland stability. For suboptimum marsh elevations (expected at rapid sea level rise rates and/or low sediment supply), increases in the water level will lead to reduced root growth and a decrease in the rate of elevation gain. 5. More than 80% of the marshland in our study area has an elevation below the optimum for root growth, suggesting that this previously unknown feedback could explain observations of rapid marsh deterioration in the region. 6. Synthesis . Below-ground responses of marshes to sea level rise are more broadly applicable than above-ground feedbacks because they are consistent among different species and do not depend on the availability of mineral sediment.

Journal of Ecology↗
USGS2013

Comparison of sediment supply to San Francisco Bay from watersheds draining the Bay Area and the Central Valley of California

Quantifying suspended sediment loads is important for managing the world's estuaries in the context of navigation, pollutant transport, wetland restoration, and coastal erosion. To address these needs, a comprehensive analysis was completed on sediment supply to San Francisco Bay from fluvial sources. Suspended sediment, optical backscatter, velocity data near the head of the estuary, and discharge data obtained from the output of a water balance model were used to generate continuous suspended sediment concentration records and compute loads to the Bay from the large Central Valley watershed. Sediment loads from small tributary watersheds around the Bay were determined using 235 station-years of suspended sediment data from 38 watershed locations, regression analysis, and simple modeling. Over 16 years, net annual suspended sediment load to the head of the estuary from its 154,000 km 2 Central Valley watershed varied from 0.13 to 2.58 (mean = 0.89) million metric t of suspended sediment, or an average yield of 11 metric t/km 2 /yr. Small tributaries, totaling 8145 km 2 , in the nine-county Bay Area discharged between 0.081 and 4.27 (mean = 1.39) million metric t with a mean yield of 212 metric t/km 2 /yr. The results indicate that the hundreds of urbanized and tectonically active tributaries adjacent to the Bay, which together account for just 5% of the total watershed area draining to the Bay and provide just 7% of the annual average fluvial flow, supply 61% of the suspended sediment. The small tributary loads are more variable (53-fold between years compared to 21-fold for the inland Central Valley rivers) and dominated fluvial sediment supply to the Bay during 10 out of 16 yr. If San Francisco Bay is typical of other estuaries in active tectonic or climatically variable coastal regimes, managers responsible for water quality, dredging and reusing sediment accumulating in shipping channels, or restoring wetlands in the world's estuaries may need to more carefully account for proximal small urbanized watersheds that may dominate sediment supply.

California↗
USGS2014

Linking channel hydrology with riparian wetland accretion in tidal rivers

The hydrologic processes by which tide affects river channel and riparian morphology within the tidal freshwater zone are poorly understood, yet are fundamental to predicting the fate of coastal rivers and wetlands as sea level rises. We investigated patterns of sediment accretion in riparian wetlands along the non-tidal through oligohaline portion of two coastal plain rivers in Maryland, U.S.A., and how flow velocity, water level, and suspended sediment concentration (SSC) in the channel may have contributed to those patterns. Sediment accretion was measured over a one year period using artificial marker horizons, channel hydrology was measured over a one month period using acoustic Doppler current profilers, and SSC was predicted from acoustic backscatter. Riparian sediment accretion was lowest at the non-tidal sites (mean and standard deviation = 8 ± 8 mm yr -1 ), highest at the upstream tidal freshwater forested wetlands (TFFW) (33 ± 28 mm yr -1 ), low at the midstream TFFW (12 ± 9 mm yr -1 ), and high at the oligohaline (fresh-to-brackish) marshes (19 ± 8 mm yr -1 ). Channel maximum flood and ebb velocity was 2-fold faster at the oligohaline than tidal freshwater zone on both tidal rivers, corresponding with the differences in in-channel SSC: the oligohaline zone's SSC was more than double the tidal freshwater zone's, and was greater than historical SSC at the non-tidal gages. The tidal wave characteristics differed between rivers, leading to significantly greater in-channel SSC during floodplain inundation in the weakly convergent than the strongly convergent tidal river. Overall sediment accretion was higher in the embayed river likely due to a single storm discharge and associated sedimentation.

Maryl↗
USGS2001

High-resolution seismic reflection/refraction images near the outer margin of the Chesapeake Bay impact crater, York-James Peninsula, southeastern Virginia

Powars and Bruce (1999) showed that the Chesapeake Bay region of southeastern Virginia was the site of an asteroid or comet impact during the late Eocene, approximately 35 million years ago (Fig. 1). Initial borehole and marine seismic-reflection data revealed a 90-km-diameter impact structure, referred to as the Chesapeake Bay Impact Crater (CBIC), that lies buried beneath the southern Chesapeake Bay and surrounding Virginia Coastal Plain (Powars and Bruce, Figs. 1b). Stratigraphic correlations among a series of boreholes suggest that the impact disrupted basement rock and the overlying Cretaceous through middle Eocene deltaic and marine sediments. The CBIC truncates important regional sedimentary aquifer systems and possibly caused differential flushing of connate seawater. Therefore, the CBIC affects the present-day ground-water quantity and quality in the rapidly growing Hampton Roads region of southeastern Virginia. Impact-generated faults in the basement rock may be the sources of small-to-moderate earthquakes that have been occurred around the perimeter of the impact structure over the past few hundred years (Johnson et al., 1998). Powars and Bruce (1999) suggest that 150 m to 490 m of relatively undisturbed, post-impact Coastal-Plain sediments overlie the impact-disrupted sediments and basement rocks west of Chesapeake Bay. Their interpretation of marine seismic data, released from Texaco and Exxon, revealed a central 38-km-wide, 1.6-km-deep disrupted zone in the basement rocks (inner basin), which is surrounded by a 21- to 31-km-wide, 1- km-deep annular trough. Steep rim escarpments surround these features, which they mapped regionally as the outer and inner margins (rims) of the CBIC (Fig. 1b). The outer margin is a slumped terrace zone that has a 120- to 305-m-high gullied escarpment and varies in width from 0.8 to 3.2 km. However, the geographic bounds of the CBIC, its effects on the regional aquifer systems, and the distribution of impact generated faults and fractures in basement are not well determined. To better determine some of the unknowns associated with the CBIC, we conducted a 350-m-long, high-resolution seismic reflection and refraction survey, referred to here as the CBIC-1 seismic survey, on the York-James Peninsula in June 1999. In particular, we attempted to: better define the outer margin of the CBIC, understand lateral variations in the stratigraphic sequence, help assess potential hazards associated with regional seismicity, and determine acquisition parameters needed for shallow-depth seismic imaging in the Chesapeake Bay area.

Virginia↗
USGS1987

Biogeochemical cycling in an organic-rich coastal marine basin. 8. A sulfur isotopic budget balanced by differential diffusion across the sediment-water interface

The sulfur isotopic composition of the sulfur fluxes occurring in the anoxic marine sediments of Cape Lookout Bight, N.C., U.S.A., was determined, and the result of isotopic mass balance was obtained via the differential diffusion model. Seasonal pore water sulfate δ 34 S measurements yielded a calculated sulfate input of 0.6%.. Sulfate transported into the sediments via diffusion appeared to be enriched in the lighter isotope because its concentration gradient was steeper, due to the increase in the measured isotopic composition of sulfate with depth. Similarly, the back diffusion of dissolved sulfide towards the sediment-water interface appeared enriched in the heavier isotope. The isotopic composition of this flux was calculated from measurements of the δ 34 S of dissolved sulfide and was determined to be 15.9%.. The isotopic composition of buried sulfide was determined to be −5.2%. and the detrital sulfur input was estimated to be −6.2%.. An isotope mass balance equation based upon the fluxes at the sediment-water interface successfully predicted the isotopic composition of the buried sulfur flux within 0.5%., thus confirming that isotopes diffuse in response to their individual concentration gradients.

Geochimica et Cosmochimica Acta↗
USGS1983

Quaternary geology of the Rhode Island inner shelf

Five sedimentary units and three erosional unconformities identified in high-resolution seismic-reflection profiles reveal the stratigraphic framework and Quaternary history of the inner continental shelf south of Narragansett Bay, Rhode Island. Late Tertiary to early Pleistocene rivers eroded the pre-Mesozoic bedrock and the Upper Cretaceous to lower Tertiary coastal plain and continental shelf strata to form a lowland and cuesta having a north-facing escarpment. The lowland and landward flanks of the cuesta were modified by glaciers during Pleistocene time and subsequently were overlain by drift and end moraine deposits of the late Wisconsinan ice advance. During deglaciation, freshwater lakes formed between the retreating ice and end moraines. Prior to sea-level rise, the drift and older deposits were cut by streams flowing south and southwestward toward Block Island Sound. As sea level rose, postglacial valleys were partly filled by fluvial, freshwater-peat, estuarine and salt-marsh deposits. Transgressing seas eroded the sea floor, exposing bedrock and coastal plain outcrops, and deposited marine sediments. ?? 1983.

Rhode Island↗
USGS2016

Pleistocene Lake Bonneville as an analog for extraterrestrial lakes and oceans

Geomorphic confirmation for a putative ancient Mars ocean relies on analog comparisons of coastal-like features such as shoreline feature attributes and temporal scales of process formation. Pleistocene Lake Bonneville is one of the few large, geologically young, terrestrial lake systems that exemplify well-preserved shoreline characteristics that formed quickly, on the order of a thousand years or less. Studies of Lake Bonneville provide two essential analog considerations for interpreting shorelines on Mars: (1) morphological variations in expression depend on constructional vs erosional processes, and (2) shorelines are not always correlative at an equipotential elevation across a basin due to isostasy, heat flow, wave setup, fetch, and other factors. Although other large terrestrial lake systems display supporting evidence for geomorphic comparisons, Lake Bonneville encompasses the most integrated examples of preserved coastal features related to basin history, sediment supply, climate, and fetch, all within the context of a detailed hydrograph. These collective terrestrial lessons provide a framework to evaluate possible boundary conditions for ancient Mars hydrology and large water body environmental feedbacks. This knowledge of shoreline characteristics, processes, and environments can support explorations of habitable environments and guide future mission explorations.

Book chapter↗
USGS2009

Chemical weathering of a marine terrace chronosequence, Santa Cruz, California. Part II: Solute profiles, gradients and the comparisons of contemporary and long-term weathering rates

The spatial and temporal changes in hydrology and pore water elemental and 87 Sr/ 86 Sr compositions are used to determine contemporary weathering rates in a 65- to 226-kyr-old soil chronosequence formed from granitic sediments deposited on marine terraces along coastal California. Soil moisture, tension and saturation exhibit large seasonal variations in shallow soils in response to a Mediterranean climate. These climate effects are dampened in underlying argillic horizons that progressively developed in older soils, and reached steady-state conditions in unsaturated horizons extending to depths in excess of 15 m. Hydraulic fluxes (q h ), based on Cl mass balances, vary from 0.06 to 0.22 m yr -1 , resulting in fluid residence times in the terraces of 10-24 yrs. As expected for a coastal environment, the order of cation abundances in soil pore waters is comparable to sea water, i.e., Na > Mg > Ca > K > Sr, while the anion sequence Cl > NO 3 > HCO 3 > SO 4 reflects modifying effects of nutrient cycling in the grassland vegetation. Net Cl-corrected solute Na, K and Si increase with depth, denoting inputs from feldspar weathering. Solute 87 Sr/ 86 Sr ratios exhibit progressive mixing of sea water-dominated precipitation with inputs from less radiogenic plagioclase. While net Sr and Ca concentrations are anomalously high in shallow soils due to biological cycling, they decline with depth to low and/or negative net concentrations. Ca/Mg, Sr/Mg and 87 Sr/ 86 Sr solute and exchange ratios are similar in all the terraces, denoting active exchange equilibration with selectivities close to unity for both detrital smectite and secondary kaolinite. Large differences in the magnitudes of the pore waters and exchange reservoirs result in short-term buffering of the solute Ca, Sr, and Mg. Such buffering over geologic time scales can not be sustained due to declining inputs from residual plagioclase and smectite, implying periodic resetting of the exchange reservoir such as by past vegetational changes and/or climate. Pore waters approach thermodynamic saturation with respect to albite at depth in the younger terraces, indicating that weathering rates ultimately become transport-limited and dependent on hydrologic flux. Contemporary rates R solute are estimated from linear Na and Si pore weathering gradients b solute such that R solute = frac(q h , b solute ?? S v ) where S v is the volumetric surface area and ?? is the stoichiometric coefficient. Plagioclase weathering rates (0.38-2.8 ?? 10 -15 mol m -2 s -1 ) are comparable to those based on 87 Sr/ 86 Sr mass balances and solid-state Na and Ca gradients using analogous gradient approximations. In addition, contemporary solute gradients, under transport-limited conditions, approximate long-term solid-state gradients when normalized against the mass of protolith plagioclase and its corresponding aqueous solubility. The multi-faceted weathering analysis presented in this paper is perhaps the most comprehensive yet applied to a single field study. Within uncertainties of the methods used, present day weathering rates, based on solute characterizations, are comparable to average long-term past rates as evidenced by soil profiles.

Geochimica et Cosmochimica Acta↗
USGS2017

Relationship between water and aragonite barium concentrations in aquaria reared juvenile corals

Coral barium to calcium (Ba/Ca) ratios have been used to reconstruct records of upwelling, river and groundwater discharge, and sediment and dust input to the coastal ocean. However, this proxy has not yet been explicitly tested to determine if Ba inclusion in the coral skeleton is directly proportional to seawater Ba concentration and to further determine how additional factors such as temperature and calcification rate control coral Ba/Ca ratios. We measured the inclusion of Ba within aquaria reared juvenile corals ( Favia fragum ) at three temperatures (∼27.7, 24.6 and 22.5 °C) and three seawater Ba concentrations (73, 230 and 450 nmol kg −1 ). Coral polyps were settled on tiles conditioned with encrusting coralline algae, which complicated chemical analysis of the coral skeletal material grown during the aquaria experiments. We utilized Sr/Ca ratios of encrusting coralline algae (as low as 3.4 mmol mol −1 ) to correct coral Ba/Ca for this contamination, which was determined to be 26 ± 11% using a two end member mixing model. Notably, there was a large range in Ba/Ca across all treatments, however, we found that Ba inclusion was linear across the full concentration range. The temperature sensitivity of the distribution coefficient is within the range of previously reported values. Finally, calcification rate, which displayed large variability, was not correlated to the distribution coefficient. The observed temperature dependence predicts a change in coral Ba/Ca ratios of 1.1 μmol mol −1 from 20 to 28 °C for typical coastal ocean Ba concentrations of 50 nmol kg −1 . Given the linear uptake of Ba by corals observed in this study, coral proxy records that demonstrate peaks of 10–25 μmol mol −1 would require coastal seawater Ba of between 60 and 145 nmol kg −1 . Further validation of the coral Ba/Ca proxy requires evaluation of changes in seawater chemistry associated with the environmental perturbation recorded by the coral as well as verification of these results for Porites species, which are widely used in paleo reconstructions.

Geochimica et Cosmochimica Acta↗
USGS2020

Wave-resolving Shoreline Boundary Conditions for Wave-Averaged Coastal Models

Downscaling broadscale ocean model information to resolve the fine-scale swash-zone dynamics has a number of applications, such as improved resolution of coastal flood hazard drivers, modeling of sediment transport and seabed morphological evolution. A new method is presented, which enables wave-averaged models for the nearshore circulation to include short-wave induced swash zone dynamics that evolve at the wave group scale (i.e. averaged over the short waves). Such dynamics, which cannot be described, by construction through wave-averaged models, play a fundamental role in nearshore hydrodynamics and morphodynamics. The method is based on the implementation of a set of Shoreline Boundary Conditions (SBCs) in wave-averaged models. The chosen set of SBCs allows for proper computation of the short-wave properties at a mean shoreline () taken as the envelope of the actual shoreline. The suitability of the approach is assessed through implementation of the SBCs into the Regional Ocean Modeling System (ROMS) coupled to a spectral wave model (InWave for IG waves and SWAN for wind waves). As the aim is to assess the viability of the approach, the SBCs are implemented only through a one-way coupling to ROMS (i.e. ROMS forcing the SBCs). Four different test cases – with constant, periodic and bichromatic offshore forcing – are run to assess the model performances. The main results of the analysis are: (a) the proposed SBCs can well reproduce the shoreline motion and swash zone dynamics in there for all chosen tests (RMSE and BIAS less than 20 % up to a cross-shore resolution of 4.0 m ( or )) and (b) implementation of the SBCs allows ROMS to accurately simulate the swash zone flows even at a resolution 40 times coarser than that needed by ROMS with its own wet–dry routine to properly describe the same flows. The latter result clearly demonstrates the major computational advantage of using the proposed SBCs. We also show that most of the swash zone dynamics is due to the mean flow (i.e. incoming Riemann variable) and the local (at ) wave height. However, especially in the case of bichromatic waves, the swash zone water volume content also seems to play a crucial role.

Ocean Modeling↗
USGS1989

Style of extensional tectonism during rifting, Red Sea and Gulf of Aden

Models describing the development of the Red Sea and the Gulf of Aden, prior to the present periods of sea-floor spreading, include those that use block faulting on steep normal faults, uniform diffuse shear in continental crust, simple shear on large detachment faults that cut the entire lithosphere, combinations involving detachment faults/ductile deformation/plutonic inflation, and ones that minimize the role of mechanical extension in favor of an earlier stage of sea-floor spreading. Geologic and geophysical studies from the Arabian continental margin in the southern Red Sea and LANDSAT analysis of the northern Somalia margin in the Gulf of Aden suggest that the early continental rifts were long narrow features that formed by extension on closely spaced normal faults above moderate- to shallow-dipping detachments with break-away zones defining one rift flank and root zones under the opposing rift flank. The rift flanks presently form the opposing continental margins across each ocean basin. The detachment on the Arabian margin dips gently to the west, with a breakaway zone now eroded above the deeply dissected terrain of the Arabian escarpment. The Arabian detachment projects westward to middle crustal levels beneath the sediment of the southern Red Sea coastal plain. Strata in the upper plate dip as steeply as 60° to the west, and the beds are repeated by numerous planar and listric normal faults that dip to the east. Most of the faults truncate downward at the detachment. Thus, the upper plate is highly extended and the rocks in its eastern part have been translated about 20 km westward and 21/2- to 5-km downward relative to the rest of Arabia. A prominent detachment surface, with a north dip, is evident in northernmost Somalia where it breaks away north of the Somalian escarpment in an otherwise undeformed section of cratonic strata of Jurassic to Eocene age. The upper plate of the Somalian detachment consists of a highly faulted collage of the cratonic strata. This fault projects to middle crustal levels in the opposing Arabian margin to the northeast.

Journal of African Earth Sciences↗
USGS1999

Restoring marsh elevation in a rapidly subsiding salt marsh by thin-layer deposition of dredged material

Thin-layer deposition of dredged material on coastal marsh by means of high-pressure spray dredging (Jet-Spray??2) technology has been proposed as a mechanism to minimize wetland impacts associated with traditional bucket dredging technologies and to restore soil elevations in deteriorated marshes of the Mississippi River delta. The impact of spray dredging on vegetated marsh and adjacent shallow-water habitat (formerly vegetated marsh that deteriorated to open water) was evaluated in a 0.5-ha Spartina alterniflora-dominated salt marsh in coastal Louisiana. The thickness of dredged sediment deposits was determined from artificial soil marker horizons and soil elevation change was determined from sedimentation-erosion tables (SET) established prior to spraying in both sprayed and reference marshes. The vertical accretion and elevation change measurements were made simultaneously to allow for calculation of shallow (~5 m depth) subsidence (accretion minus elevation change). Measurements made immediately following spraying in July 1996 revealed that stems of S. alterniflora were knocked down by the force of the spray and covered with 23 mm of dredged material. Stems of S. alterniflora soon recovered, and by July 1997 the percent cover of S. alterniflora had increased three-fold over pre-project conditions. Thus, the layer of dredged material was thin enough to allow for survival of the S. alterniflora plants, with no subsequent colonization by plant species typical of higher marsh zones. By February 1998, 62 mm of vertical accretion accumulated at this site, and little indication of disturbance was noted. Although not statistically significant, soil elevation change was greater than accretion on average at both the spray and reference marshes, suggesting that subsurface expansion caused by increased root biomass production and/or pore water storage influence elevation in this marsh region. In the adjacent shallow water pond, 129 mm of sediment was deposited in July 1996 as a result of spraying, and despite initial shallow subsidence and continual erosion through February 1998, water bottom elevation was raised sufficiently to allow S. alterniflora to invade via rhizome growth from the adjacent marsh. Hence, thin-layer deposition of dredged material at this site was effective at restoring and maintaining marsh elevation after 1.5 years. However, if the open water sediment deposits are not soon completely stabilized via further vegetative colonization, erosion may eventually lower elevations to the level where emergent vegetation cannot persist.

Ecological Engineering↗
USGS2012

The offshore export of sand during exceptional discharge from California rivers

Littoral cells along active tectonic margins receive large inputs of sand and gravel from coastal watersheds and commonly lose this sediment to submarine canyons. One hypothesis is that the majority of coarse (sand and gravel) river sediment discharge will be emplaced within and immediately “resupply” local littoral cells. A competing hypothesis is that the infrequent, large floods that supply the majority of littoral sediment may discharge water-sediment mixtures within negatively buoyant hyperpycnal plumes that transport sediment offshore of the littoral cell. Here we summarize pre- and post-flood surveys of two wave-dominated California (United States) river deltas during record to near-record floods to help evaluate these hypotheses: the 1982–1983 delta at the San Lorenzo River mouth and the 2005 delta at the Santa Clara River mouth. Flood sedimentation at both deltas resulted in several meters of aggradation and hundreds of meters of offshore displacement of isobaths. One substantial difference between these deltas was the thick (>2 m) aggradation of sand on the inner shelf of the Santa Clara River delta that contained substantial amounts (∼50%) of littoral-grade sediment. Once deposited on the inner shelf, only a fraction (∼20%) of this river sand was observed to migrate toward the beach over the following 5 yr. Furthermore, simple hypopycnal plume behavior could not explain deposition of this sand on the inner shelf. Thus, during an exceptional flood a substantial amount of littoral-grade sand was exported offshore of the littoral system at the Santa Clara River mouth—likely from hyperpycnal plume processes—and was deposited on the inner shelf.

California↗
USGS2017

Shelf evolution along a transpressive transform margin, Santa Barbara Channel, California

High-resolution bathymetric and seismic reflection data provide new insights for understanding the post–Last Glacial Maximum (LGM, ca. 21 ka) evolution of the ∼120-km-long Santa Barbara shelf, located within a transpressive segment of the transform continental margin of western North America. The goal is to determine how rising sea level, sediment supply, and tectonics combine to control shelf geomorphology and history. Morpho­logic, stratigraphic, and structural data highlight regional variability and support division of the shelf into three domains. (1) The eastern Santa Barbara shelf is south of and in the hanging wall of the blind south-dipping Oak Ridge fault. The broad gently dipping shelf has a convex-upward shape resulting from thick post-LGM sediment (mean = 24.7 m) derived from the Santa Clara River. (2) The ∼5–8-km-wide Ventura Basin obliquely crosses the shelf and forms an asymmetric trough with thick post-LGM sediment fill (mean = 30.4 m) derived from the Santa Clara and Ventura Rivers. The basin is between and in the footwalls of the Oak Ridge fault to the south and the blind north-dipping Pitas Point fault to the north. (3) The central and western Santa Barbara shelf is located north of and in the hanging wall of the North Channel–Pitas Point fault system. The concave-up shape of the shelf results from folding, marine erosion, and the relative lack of post-LGM sediment cover (mean = 3.8 m). Sediment is derived from small steep coastal watersheds and largely stored in the Gaviota bar and other nearshore mouth bars. Three distinct upper slope morphologies result from a mix of progradation and submarine landsliding. Ages and rates of deformation are derived from a local sea-level-rise model that incorporates an inferred LGM shoreline angle and the LGM wave-cut platform. Post-LGM slip rates on the offshore Oak Ridge fault are a mini­mum of 0.7 ± 0.1 mm/yr. Slip rates on the Pitas Point fault system are a minimum of 2.3 ± 0.3 mm/yr near Pitas Point, and decrease to the west across the Santa Barbara Channel. Documentation of fault lengths, slip rates, and rupture modes, as well as potential zones of submarine landsliding, provide essential information for enhanced regional earthquake and tsunami hazard assessment.

California↗
USGS2021

Mapping critical minerals from the sky

Critical mineral resources titanium, zirconium, and rare earth elements occur in placer deposits over vast parts of the U.S. Atlantic Coastal Plain. Key questions regarding provenance, pathways of minerals to deposit sites, and relations to geologic features remain unexplained. As part of a national effort to collect data over regions prospective for critical minerals, the first public high-resolution aeroradiometric survey over the U.S. Atlantic Coastal Plain was conducted over Quaternary sediments in South Carolina. The new data provide an unprecedented view of potential deposits by imaging Th-bearing minerals in the heavy mineral assemblage. Sand ridges show the highest radiometric Th values with localized, linear anomalies, especially along the shoreface and in areas reworked by multiple processes and/or during multiple episodes. Estuarine areas with finer-grained sediments show lower, distributed Th anomalies. Th values averaged over geologic unit areas are similar for both environments, suggesting that heavy minerals are present but have not been locally concentrated in the lower-energy estuarine environments. Radiometric K highlights immature minerals such as mica and potassium feldspar. K is elevated within shallow sediments younger than ca. 130 ka, an attribute that persists in regional data from northern South Carolina to northern Florida. Both K and Th are elevated over the floodplains of the Santee River and other rivers with headwaters in the igneous and metamorphic Piedmont Terrane. The persistence of K anomalies for distances of more than 100 km from the Santee River floodplain suggests that heavy minerals are delivered from the Piedmont to offshore areas by major rivers, transported along the coast by the longshore current, and redeposited onshore by marine processes.

Florida, Georgia, South Carolina↗