USGS Science⌕ Search

SEARCH · USGS Science

Results for “Carbon Capture Science and Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,660 records · Page 33Linked to original sources
USGS2026

Estimating habitat availability for Chinook salmon (Oncorhynchus tshawytscha) and steelhead (O. mykiss) to inform reintroduction planning in the middle Snake River basin, USA

Anadromous fishes have been blocked from the middle Snake River basin since the construction of flood control, irrigation, and hydroelectric projects during the 19 th and 20 th centuries, culminating with the construction of Hells Canyon Dam (river kilometer [rkm] 398) in 1967. Seven large watersheds in the blocked area of the basin are under consideration for Pacific salmon reintroduction. The primary objective of this study was to identify and characterize potential reintroduction sites with high-quality rearing and spawning habitat for Chinook salmon ( Oncorhynchus tshawytscha ) and steelhead ( O. mykiss ) upstream of the Hells Canyon Complex in Idaho, Oregon, and Nevada, USA. We created and tested habitat models to predict rearing presence/absence, rearing abundance, and spawning presence/absence using channel morphology, hydrology, and stream temperature variables obtained from regional peer-reviewed datasets. Habitat models were trained with salmonid presence and abundance records collected in the lower Snake River basin (downstream of Hells Canyon Dam), where anadromous fish can currently access, from 1993 to 2011. Model performance was tested with set-aside data comprised of randomly selected reaches and independent environmental DNA data. An index model was created in the middle Snake River basin for each species by combining results from the habitat models. Modeling covariates differed by species and life stage and included different combinations of August stream temperature, summer flow, channel slope, and quadratic terms for temperature and slope. The habitat models predicted high versus low Chinook salmon and steelhead probability and abundance with 66% to 85% accuracy depending on species and life stage. The index models predicted a total of 2,887 km of Chinook salmon habitat and 2,434 km of steelhead habitat in the blocked area. The three basins in the blocked area with the greatest amount of predicted habitat were the Powder River, South Fork Payette River, and North Fork Payette River for Chinook salmon, and the Powder River, South Fork Boise River, and South Fork Payette River for steelhead. The modeling approach presented here is complementary to other planning efforts for Chinook salmon and steelhead reintroduction in the blocked area of the Snake River basin, and similar approaches may be useful for reintroduction planning in other systems.

Idaho, Nevada, Oregon, Utah, Washington, Wyoming↗
USGS2026

Post-fire soil hydrologic response and recovery in northern California (USA)

Background Wildfires abruptly change landscapes by altering soil properties and vegetation cover. These changes are thought to reduce soil infiltration capacity, making landscapes susceptible to runoff and erosion. However, post-fire soil response is complex and likely varies across locations and time. Aims Here, we aim to understand regional post-fire soil response and recovery by tracking changes across different northern California (USA) lithology and vegetation types. Methods We conducted repeat in situ soil infiltration tests for 3 years post-fire at 31 burned and 10 unburned sites spanning the 2021 Dixie, 2020 LNU Lightning Complex, 2020 Walbridge and 2020 Glass fires. Key results Our two main findings are: (1) burned chaparral soils have increased hydraulic conductivity compared with unburned sites, and (2) infiltration rates return to pre-fire conditions within 3 years across most lithologies and vegetations. Conclusions Recovery might be generalizable by vegetation and lithology but differ regionally, making it important to identify meaningful hydrologic response units (HRUs). Multi-year studies with paired burned and unburned measurements can constrain the recovery timeline and provide information missed by observations solely of burned soils. Implications Understanding where, and for how long, soil remains susceptible to runoff and erosion can help prioritize areas and time periods most in need of mitigation.

California↗
USGS1998

Continuous hydrologic simulation of runoff for the Middle Fork and South Fork of the Beargrass Creek basin in Jefferson County, Kentucky

The Hydrological Simulation Pro-gram-FORTRAN (HSPF) was applied to an urban drainage basin in Jefferson County, Ky to integrate the large amounts of information being collected on water quantity and quality into an analytical framework that could be used as a management and planning tool. Hydrologic response units were developed using geographic data and a K-means analysis to characterize important hydrologic and physical factors in the basin. The Hydrological Simulation Program FORTRAN Expert System (HSPEXP) was used to calibrate the model parameters for the Middle Fork Beargrass Creek Basin for 3 years (June 1, 1991, to May 31, 1994) of 5-minute streamflow and precipitation time series, and 3 years of hourly pan-evaporation time series. The calibrated model parameters were applied to the South Fork Beargrass Creek Basin for confirmation. The model confirmation results indicated that the model simulated the system within acceptable tolerances. The coefficient of determination and coefficient of model-fit efficiency between simulated and observed daily flows were 0.91 and 0.82, respectively, for model calibration and 0.88 and 0.77, respectively, for model confirmation. The model is most sensitive to estimates of the area of effective impervious land in the basin; the spatial distribution of rain-fall; and the lower-zone evapotranspiration, lower-zone nominal storage, and infiltration-capacity parameters during recession and low-flow periods. The error contribution from these sources varies with season and antecedent conditions.

Kentucky↗
USGS2024

Using a time-of-travel sampling approach to quantify per- and polyfluoroalkyl substances (PFAS) stream loading and source inputs in a mixed-source, urban catchment

Understanding per- and polyfluoroalkyl substances (PFAS) mass distribution in surface and groundwater systems can support source prioritization, load reduction, and water management. Thirteen sites within an urban catchment were sampled utilizing a time-of-travel sampling approach to minimize the influence of subdaily fluctuations in mass from PFAS point sources and to quantify PFAS and ancillary chemical loads from various PFAS sources. A larger increase in perfluoroalkyl sulfonate (PFSA) loads (8 to 11 μg/s, up to 618%) than in perfluoroalkyl carboxylate (PFCA) loads (no change to 3.4 μg/s, up to 122%) was observed at sites below tributaries influenced by military bases with known groundwater discharge. Point discharges from two sewage treatment plants (STPs) resulted in increases in PFCA and PFSA loads that were similar (6 and 10 μg/s respectively) below the first STP and greater for PFCA compared to PFSA loads (23 and 13 μg/s respectively) below the second STP. Overall, percent increases in total PFAS load ranged from 20 to 277% for military base inputs and 44 to 77% for STP inputs. A focus catchment that represents only 14% (76.9 km 2 ) of the drainage area at the most downstream site (544 km 2 ) accounted for about 70% of PFSA and 40% of PFCA loads observed at the most downstream site. Results show that by using a time-of-travel sampling approach in mixed, urban settings with several PFAS sources, it is possible to quantify stream loads from individual PFAS sources, thereby improving source attribution and providing actionable data for water-resource managers.

ACS ES&T Water↗
USGS2024

Spatial distribution of API gravity and gas/oil ratios for petroleum accumulations in Upper Cretaceous strata of the San Miguel, Olmos, and Escondido Formations of the south Texas Maverick Basin—Implications for petroleum migration and charge history

The Maverick Basin of south Texas is currently undergoing active exploration and production of gas and oil from tight sandstone reservoirs. The most productive tight sandstones in the basin are in the Upper Cretaceous San Miguel, Olmos, and Escondido Formations. These units are second only to the Eagle Ford Shale in terms of cumulative production volumes. The structural history of the Maverick Basin, from rifting to subsidence to exhumation, has had a profound effect on the characteristics of these reservoirs and the petroleum resources contained therein. This U.S. Geological Survey review of the production history of these strata reflects a recent shift from conventional production to horizontal drilling (unconventional) that exploits low permeability reservoirs in previously overlooked areas of existing oil and gas fields in southern Texas, typically outside of established field boundaries. To investigate the physical properties of the Maverick Basin hydrocarbon accumulations, this case study compiled American Petroleum Institute (API) gravity measurements and calculated cumulative gas/oil ratios (GOR) for thousands of producing wells from the San Miguel, Olmos, and Escondido Formations. Maps were generated from the compiled well production data to show the spatial heterogeneity of API gravity and GOR values for the three formations within the Maverick Basin and immediately outside the basin to the northeast. Within the Maverick Basin, the spatial patterns of API gravity values indicate lighter oils downdip towards the southern basin edge. GOR values indicative of wet and dry gases within the basin are seen interspersed, with values that correspond to black and heavy oils. Differences in the spatial patterns of the petroleum properties within the Maverick Basin are interpreted as effects of Eocene basin inversion caused by Laramide orogenic deformation, and the resulting reservoir exhumation of basin strata. East of the Maverick Basin, spatial distributions of API gravity and GOR values show progressively heavier oils updip to the northwest, grading to dry gases downdip to the southeast, which correlates to the oil and gas windows of the underlying Eagle Ford Shale. Correlation of API gravity and GOR values from the San Miguel, Olmos, and Escondido Formations with thermal maturity data from the Eagle Ford Shale suggests that the Eagle Ford Shale is the petroleum source, and that petroleum migration was approximately vertical for areas to the east of the Maverick Basin. The discontinuity of API gravity and GOR properties within the Maverick Basin implies a complex petroleum charge history, possibly involving the remigration of petroleum and the addition of petroleum from other source intervals in Mexico, to the southwest. Depressurization of exhumed, overpressured reservoirs of the San Miguel, Olmos, and Escondido Formations can explain the intermittent occurrence of gas production throughout the southern Maverick Basin by exsolution of gas from formation brines and the resulting dry gas flushing of hydrocarbon-charged reservoirs. The introduction of dry gas through flushing can, in turn, explain why the patterns of API gravity and GOR values are so dissimilar in the Maverick Basin. This process has implications for possible future production of unconventional resources from undiscovered tight-gas reservoirs in strata of the San Miguel, Olmos, and Escondido Formations, and a different approach to petroleum exploration may be needed in the Maverick Basin relative to exploration techniques applied in other basins within the northern Gulf of Mexico.

Texas↗
USGS2025

Aeromagnetic and magnetotelluric imaging of west-central Idaho and the Stibnite-Yellow Pine mining district: A regional to district perspective

Aeromagnetic and magnetotelluric (MT) data are used to better understand the geology and mineral resources near the Stibnite-Yellow Pine mining district in central Idaho. The reduced-to-pole (RTP) transformation of regional-scale aeromagnetic data shows that allochthonous island-arc rocks west of the Salmon River suture are significantly more magnetic than the Laurentian continental rocks east of the suture and that the granitoids of the Idaho batholith have moderate to low magnetization in both early, metaluminous, and late, peraluminous phases. Application of tilt derivative to aeromagnetic data highlights major crustal-scale structures. The 5-km upward continued magnetic data indicate island-arc rocks have deep magnetic sources. The 110-km-long MT profile images resistivity structure to depths around 30 km. At shallow depths, resistivity corresponds to mapped geologic units, with moderate resistivities underlying volcanic and roof-pendant metasedimentary rocks and moderate to high resistivities occurring beneath the Idaho batholith. Crustal-scale moderate resistivities beneath the suture image the results of tectonomagmatic processes that accompanied suturing and translating allochthonous terranes. Low resistivity values beneath and fringing the batholith are derived from metasedimentary rocks that may have served as a melt source and reductant during melt generation and provided metals during later ore formation. In the Stibnite-Yellow Pine mining district, a high-resolution aeromagnetic compilation is shown to correlate with mapped lithologies and mineral deposit-related structures. The RTP transform distinguishes magnetic and nonmagnetic granitoid phases of the Idaho batholith. The tilt derivative highlights metasedimentary rocks, some of which are favorable ore hosts. The Meadow Creek fault hosts the Stibnite and Hangar Flats deposits and is imaged as a magnetic low due to hydrothermal alteration. Reconstructions of magnetic anomaly offsets and orebodies indicate around 3 km of post-95 Ma dextral separation, with some or all of the offset inferred to postdate the main Au mineralization episode (61–66 Ma).

Idaho↗
USGS2026

Unraveling protracted modification of Archean and Paleoproterozoic crust in central Laurentia, Penokean orogen, with garnet and accessory mineral geochronology and microstructural analysis

Proterozoic metamorphism and deformation of the southern margin of the Superior craton in the Lake Superior region is attributed to the Penokean orogeny (1890−1830 Ma). This model includes a period of crustal inversion in which Archean basement blocks were exhumed through overlying Paleoproterozoic strata, producing the corridor of gneiss domes that parallels the trend of the Penokean orogen across the northern Midcontinent, USA. However, recent geologic mapping and 40 Ar/ 39 Ar geochronology challenge this interpretation, suggesting instead that the gneiss dome structures reflect younger episodes of tectonic activity along the southern margin of Laurentia. In absence of integrated pressure-temperature-time-deformation constraints for these rocks, interpretations are largely limited to their final cooling history, making it difficult to both identify the tectonic forces that shaped the architecture of the Penokean orogenic belt and assess the extent to which later Proterozoic tectonism modified the southern Superior craton. We address this problem with an approach joining thermodynamic modeling, garnet and accessory mineral geochronology, and microstructural analysis for several metamorphic rocks across the gneiss dome corridor. The U-Pb ages of titanite reveal that the Proterozoic geometries of exhumed basement gneiss domes are governed by preexisting Archean structures. Garnet Lu-Hf geochronology constrains the timing of prograde-to-peak metamorphism in the Penokean orogenic belt. Granulite facies metamorphism is related to the final stages of the Penokean orogeny at 1837 Ma and localized in a belt of high-grade rocks near a major Penokean suture. Garnet Lu-Hf ages of samples adjacent to gneiss domes reflect regional metamorphism following the accretionary phase of the Penokean orogeny, between 1825 Ma and 1782 Ma, which we suggest reflects continued crustal thickening related to convergence farther south during this time interval. Combination of garnet microstructures and Sm-Nd ages reflects later exhumation of gneiss domes and buried metasedimentary rocks by ca. 1750 Ma, consistent with previously published 40 Ar/ 39 Ar cooling ages across the region. Reset Lu-Hf and Sm-Nd garnet ages and U-Pb ages of syn-kinematic titanite reflect reactivation of primary Penokean structures during this period of basement uplift. These data document significant modification of the Penokean orogen and the Archean crust of the southern Superior province between 1800 Ma and 1700 Ma. Tectonic activity during this interval coincides with collisional events recognized in western Laurentia, suggesting that the period immediately following the Penokean orogeny may be a broadly important time for crustal growth and modification in proto-North America.

Michigan, Wisconsin↗
USGS2026

Early Miocene volcanic rocks and associated tectonics, Lava Hills and southern Bristol Mountains, California

Volcanic rocks of latest Oligocene to early Miocene age form an east-west belt across part of the central eastern Mojave Desert from the Whipple Mountains on the east to the Rosamond Hills on the west. We term this the central belt because it is separated from northern and southern belts by swaths with no volcanic rocks. Limited geochronologic data indicate that much of the belt is latest Oligocene and early Miocene in age, about 24 to 19 Ma, a finding that is consistent with these rocks being overlain by the 18.8 Ma Peach Spring Tuff in many places. We describe Miocene geology in a central area of the belt, in the Lava Hills, southern Bristol Mountains, and southern Old Dad Mountains. Sedimentary basins formed coeval with early andesite to rhyolite volcanism, progressing from fluvial and lacustrine tuffaceous sandstone to volcanic lavas, tuffs, and breccias, indicating that early basins formed proximal to volcanic edifices. Higher strata are fluvial and lacustrine with lavas punctuating the sequence. Although basins may partly have been formed within topographic lows bounded by volcanic domes, plateaus, and stratovolcanoes, consistent stratigraphic sections over wide areas indicate that tectonic basin evolution affected broad areas. The volcanic section is capped by local basalt flows and the regional Peach Spring Tuff. Limited data on normal faults support interpretations of early extensional basin development caused by northeast-southwest oriented stretching. Later extension caused stratal rotations, tilting early deposits down to the southwest. This tilted and subsequently beveled basin architecture was overlain by the youngest volcanic deposits, primarily rhyolite and basalt. The Peach Spring Tuff, 18.8 Ma, lies within this upper unit. Similar stratigraphic and structural relations are exposed in the nearby Marble Mountains and Van Winkle Mountain sections, reinforcing that a broad area underwent similar volcanism and tectonism. In our study area the upper unit is only very gently tilted except near dextral strike-slip faults of the eastern California shear zone. These late Miocene to Recent faults are represented as four main fault zones spaced about 5 km apart, representing distributed shear north of the Bristol Lake basin.

California↗
USGS2025

A generalized deep learning model to detect and classify volcano seismicity

Volcano seismicity is often detected and classified based on its spectral properties. However, the wide variety of volcano seismic signals and increasing amounts of data make accurate, consistent, and efficient detection and classification challenging. Machine learning (ML) has proven very effective at detecting and classifying tectonic seismicity, particularly using Convolutional Neural Networks (CNNs) and leveraging labeled datasets from regional seismic networks. Progress has been made applying ML to volcano seismicity, but efforts have typically been focused on a single volcano and are often hampered by the limited availability of training data. We build on the method of Tan et al. [2024] ( 10.1029/2024JB029194 ) to generalize a spectrogram-based CNN termed the VOlcano Infrasound and Seismic Spectrogram Neural Network ( VOISS-Net ) to detect and classify volcano seismicity at any volcano. We use a diverse training dataset of over 270,000 spectrograms from multiple volcanoes: Pavlof, Semisopochnoi, Tanaga, Takawangha, and Redoubt volcanoes\replaced (Alaska, USA); Mt. Etna (Italy); and Kīlauea, Hawai`i (USA). These volcanoes present a wide range of volcano seismic signals, source-receiver distances, and eruption styles. Our generalized VOISS-Net model achieves an accuracy of 87 % on the test set. We apply this model to continuous data from several volcanoes and eruptions included within and outside our training set, and find that multiple types of tremor, explosions, earthquakes, long-period events, and noise are successfully detected and classified. The model occasionally confuses transient signals such as earthquakes and explosions and misclassifies seismicity not included in the training dataset (e.g. teleseismic earthquakes). We envision the generalized VOISS-Net model to be applicable in both research and operational volcano monitoring settings.

Volcanica↗
USGS2026

Effects of groundwater withdrawals for water bottling and municipal use, Wards Brook Valley, Maine and New Hampshire

Hydrologic models for the Wards Brook valley near Fryeburg, Maine were developed for historical (2016 – 2021) and hypothetical future conditions (2046 – 2065 and 2080 – 2099) to understand the effects of groundwater withdrawals for bottled water and municipal use on hydrologic conditions (stream base flows and groundwater levels). Analyses showed that the simulated base flows in Wards Brook were reduced because of pumping for both municipal water supplies and for water bottling, and about half of the total pumping impact on the base flows in Wards Brook was from the bottled water extraction. Simulated flows were greater than the minimum recommended streamflow of 2,180 cubic meters per day (400 gallons per minute) throughout the historical period. Simulated groundwater levels at two of three nearby ponds (Round Pond and Davis Pond) were minimally affected by pumping conditions, and effects were primarily from the municipal well closest to the ponds. Several estimates of future projected recharge were used to understand the potential effects of groundwater withdrawals on hydrologic conditions under multiple hypothetical climate conditions. Annual projected recharge rates in the mid- and late-21st century from two climate scenarios (stabilized greenhouse-gas emissions and high greenhouse-gas emissions) were similar to rates for 2016 – 2021. However, monthly recharge patterns for the future periods shifted toward more recharge in the winter months (December, January, and February) and less recharge in April, May, and October relative to 2016 – 2021. The lowest mean monthly base flows from the future emission scenarios all remain larger than the minimum recommended streamflow and indicate no long-term declines in flow relative to historical conditions. However, simulated base flows during hypothetical 3-year drought scenarios declined below minimum recommended streamflow during the summer months in the stabilized- and high-emission scenarios in the mid-21st century. Although water is generally plentiful in the Wards Brook valley, reduced pumping may be needed to maintain streamflows in Wards Brook under future climate conditions similar to modeled drought scenarios.

EarthArXiv↗
USGS2026

Mid-Cretaceous porphyritic magmatism in the Beartooth Mountains of the northern Laramide foreland and its connection to Frontier Formation sediment dispersal in Bighorn basin, Montana-Wyoming (USA), and Cordilleran tectonism

Porphyritic intrusions in the southeast Beartooth Mountains and porphyritic cobbles from the Torchlight conglomerate of the Cenomanian Frontier Formation in Bighorn basin (Montana-Wyoming, USA) bear striking resemblance. We utilize geologic mapping, petrography, geochemistry, and geochronology to characterize rocks from both locations and test whether the Beartooth Mountains area was the provenance for Bighorn basin cobbles. Mapping on Line Creek Plateau in the Beartooth Mountains shows three units with porphyritic phenocrysts consisting dominantly of plagioclase, plagioclase + potassium feldspar, and plagioclase + quartz. Petrography shows embayed quartz, opacitic rims, and zoned plagioclase. Geochemistry characterizes the intrusions as trachydacite to trachyte and trace elements exhibit enrichment in light rare earth elements and slight depletion in heavy rare earth elements relative to primitive mantle. Zircon U-Pb dating shows substantial Archean inheritance and ca. 104−92 Ma dates; some samples display multiple mid-Cretaceous date populations. Bighorn basin porphyritic cobbles exhibit similar modal mineralogy, near-identical geochemistry, and Archean inheritance and mid-Cretaceous geochronology. We suggest the porphyritic cobbles were sourced from basement-hosted porphyritic intrusions now exposed in the Beartooth Mountains, given that geochemistry does not agree with coeval volcanic sources along the Frontier Formation depositional fairway (Idaho batholith) or sedimentary-hosted Beartooth Mountains porphyritic sills intruded into Cambrian shale. Stratigraphic evidence does not support kilometer-scale mid-Cretaceous Beartooth Mountains exhumation to expose basement-hosted porphyritic intrusions, and we therefore present a volcanic hypothesis to bring rocks to the surface. This mid-Cretaceous multimillion-year magmatism is unexplained by tectonic models for the north-central Laramide foreland, and thus we further explore the emplacement processes, spatiotemporal significance, and tectonic implications of these rocks.

Montana, Wyoming↗
USGS2025

Estimated average annualized losses from potential building damage and fatalities due to earthquake-generated tsunamis in the United States

Earthquake-generated tsunamis represent substantial economic threats to states and territories in the United States (U.S.), but we are unaware of any effort to quantify potential impacts at the national level. This gap is partially due to the lack of nationally consistent data on tsunamigenic sources and associated return periods. This study addresses this issue and provides estimates of average annualized losses (AAL) for potential residential fatalities and capital stock losses associated with building damage (i.e., structural, non-structural, contents, and inventory damage) in the U.S. by curating tsunami-hazard information based on deterministic scenarios and probabilistic approaches, calculating potential losses, and estimating return periods where necessary. This assessment was done for the U.S. West Coast, Alaska, Hawaii, U.S. Pacific Territories, and U.S. Atlantic Territories. We estimate that earthquake-generated tsunamis that could affect these states and territories collectively represent $1 billion in potential AAL with 79 % of losses due to residential fatalities and 21 % of losses due to capital stock losses from building damage. We identify AAL variations based on county and county equivalents, states and territories, geographic regions, return periods, and departure-delay assumptions for evacuating residents. Results include high AAL values for potential fatalities in Puerto Rico and the U.S. Pacific Northwest region, high AAL values for potential building-related damage in Hawaii and California, and high building- and population-loss ratios for county equivalents in Alaska and U.S. territories.

International Journal of Disaster Risk Reduction↗
USGS2025

Determination of per- and polyfluoroalkyl substances in water by direct injection of matrix-modified centrifuge supernatant and liquid chromatography/tandem mass spectrometry with isotope dilution

A direct-injection liquid chromatography/tandem mass spectrometry method was developed to determine 34 per- and polyfluoroalkyl substances (PFAS), including selected branched isomers, in centrifuge supernatant of matrix-modified (amended with approximately 50 percent methanol) water samples. The method has been validated in reagent water, surface water, groundwater, and wastewater effluent. Other water types (for example, drinking water, untreated wastewater, and landfill leachate) have been analyzed by the method but not systematically validated. Recovery of isotope-dilution standards, added to each sample, may be used to assess method performance in nonvalidated matrices on a sample-by-sample basis. Using this method, PFAS concentrations were determined in the range of 2–2,000 nanograms per liter in water samples. This range can be extended by diluting concentrated samples. At circumneutral pH, most compounds are present in the environment in their ionized form, and data are reported as such (for example, perfluorooctanoic acid is referred to as “perfluorooctanoate” [PFOA], perfluorooctane sulfonic acid is referred to as “perfluorooctane sulfonate” [PFOS]). Sample preparation procedures were designed without the use of filtration and with minimum sample handling steps to mitigate procedural losses of target compounds due to sorption to surfaces. Further, isotope-dilution quantification allowed for the correction of bias that may result from procedural losses, matrix-induced signal suppression or enhancement, and other factors. Validation experiments to characterize bias and variability, method detection level, and holding time were done in four distinct water matrices—reagent water, surface water, treated wastewater effluent, and groundwater—at multiple concentration levels. Mean PFAS recoveries met data quality objectives of bias and variability studies in all four validation matrices except for two compounds with low and variable recovery in the reagent water matrix only. Isotope-dilution standards, treated as surrogate compounds, were analyzed in more than 1,500 customer-submitted environmental samples with aggregate recovery of 102.5±6.5 percent (mean±standard deviation). Maximum holding times for all target compounds in the four validation matrices were 28 days for refrigerated samples and 90 days for frozen samples.

Techniques and Methods↗
USGS2024

Forecasting storm-induced coastal flooding for 21st century sea-level rise scenarios in the Hawaiian, Mariana, and American Samoan Islands

Oceanographic, coastal engineering, ecologic, and geospatial data and tools were combined to evaluate the increased risks of storm-induced coastal flooding in the populated Hawaiian, Mariana, and American Samoan Islands as a result of climate change and sea-level rise. We followed a hybrid (dynamical and statistical) downscaling approach to map flooding due to waves and storm surge at 10-square meter resolution along all 1,870 kilometers of these islands’ coastlines for annual (1-year), 20-year, and 100-year return-interval storm events and +0.00 meter (m), +0.25 m, +0.50 m, +1.00 m, +1.50 m, +2.00 m, and +3.00 m sea-level rise scenarios. We quantified the coastal flood depths and extents using the latest climate forcing from Intergovernmental Panel for Climate Change’s Sixth Assessment Report Coupled Model Intercomparison Project. The data generated using these methods provide stakeholders and decision makers with a spatially explicit, rigorous valuation of how, where, and when climate change and sea-level rise increase coastal storm-induced flooding to help identify areas where management and (or) restoration could potentially help reduce the risk to, and increase the resiliency of, the coastal communities in the populated Hawaiian, Mariana, and American Samoan Islands.

Hawaii↗
USGS2025

Updating and recalibrating the integrated Santa Rosa Plain Hydrologic Model to assess stream depletion and to simulate future climate and management scenarios in Santa Rosa, Sonoma County, California

The Santa Rosa Plain Hydrologic Model (SRPHM) was developed and published in 2014 through a collaboration between the U.S. Geological Survey (USGS) and Sonoma Water to analyze the hydrologic system in the Santa Rosa Plain watershed, help meet the increasing demand for fresh water, and prepare for future uncertainties in water resources. The original model simulated hydrological conditions and water use from water years 1975 to 2010. Recently (2023), the USGS, in cooperation with Sonoma Water and the California State Water Resources Control Board, updated the SRPHM model to extend its simulation period to the end of the 2018 calendar year, incorporate new estimates of rural and agricultural water use, and use efficient input format for climate variables. The updated model was recalibrated, and evaluation of the new model calibration is included in this report. This report presents the results of comparing the hydraulic heads, streamflow, and groundwater budget simulated by the updated model with those generated by the original model and observed data. The main difference in the simulated budget between the original and updated SRPHM is the estimates of agricultural pumping, rural domestic pumping, and return flow generated from rural water use that was not simulated in the original model. The revised agricultural pumping is simulated using the agricultural package, which constrains pumping to available groundwater. The use of the agricultural package leads to a more realistic estimation of agricultural water use, with revised agricultural pumping being one-third less than that in the original model. The revised rural pumping is about half of the pumping in the original model because of using detailed parcel data to estimate population density in rural areas instead of coarse census tracts. Overall, average total inflows for water years 2006–10 simulated by the updated model were about 2 percent less than the original model, and the average total updated outflows were nearly 5 percent less than the original model. The updated model was then used to generate stream depletion maps, simulate climate change scenarios during 2019–99, and simulate water rights allocation using the Model for Decision Support in Integrated River Basin Management (MODSIM). The results from simulating eight future climate scenarios indicated either an increase in groundwater storage or no significant change in the next 80 years, along with an increase in recharge, an increase in actual evapotranspiration in six out of eight climate projections, and an increase in surface runoff. The increases in the simulated future groundwater storage, recharge, evapotranspiration, and runoff in most climate projections are mainly driven by the projected increase in precipitation in most of the future climate scenarios. The updated model also was used to test a pilot case study demonstrating water-resource allocation among different users with different water rights using the integrated MODSIM-Groundwater and Surface-Water Flow Model (GSFLOW) platform. The updated SRPHM serves as a valuable tool for analyzing historical and future hydrologic conditions in the Santa Rosa Plain watershed and preparing for future uncertainties.

California↗