USGS Science⌕ Search

SEARCH · USGS Science

Results for “Tectonics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources
USGS2001

Vertical tectonics in northern Escanaba Trough as recorded by thick late Quaternary turbidites

Escanaba Trough, the southernmost segment of the Gorda Ridge, is filled by as much as 500 m of late Quaternary turbidite and hemipelagic sediment. Coring at Deep Sea Drilling Project Site 35 and Ocean Drilling Program (ODP) Sites 1037 and 1038 together with 4.5-kHz deep-tow and 3.5-kHz surface-ship seismic reflection profiles enable a distinct pattern of reflections to be mapped throughout Escanaba Trough in the upper part of this sediment fill. The uppermost 80 m of turbidite sediment, which includes at least 11 turbidity current events, were deposited in <7 kyr. Nine of these turbidites are found throughout Escanaba Trough at water depths >3200 m. The turbidity currents were trapped upon entering Escanaba Trough, resulting in all of the sediment in suspension in the flows being deposited. The thickness of the turbidite layers reflects both the flow thickness and the vertical grain concentration within the flow that deposited the layer. Variations in the turbidite thickness with respect to water depth can be used to estimate the degree of relative vertical movement within the floor of Escanaba Trough. In the area of hydrothermal activity near ODP Site 1038, uplift of as much as 140 m has occurred over the past 8 kyr.

California↗
USGS2006

Tectonic stressing in California modeled from GPS observations

What happens in the crust as a result of geodetically observed secular motions? In this paper we find out by distorting a finite element model of California using GPS-derived displacements. A complex model was constructed using spatially varying crustal thickness, geothermal gradient, topography, and creeping faults. GPS velocity observations were interpolated and extrapolated across the model and boundary condition areas, and the model was loaded according to 5-year displacements. Results map highest differential stressing rates in a 200-km-wide band along the Pacific-North American plate boundary, coinciding with regions of greatest seismic energy release. Away from the plate boundary, GPS-derived crustal strain reduces modeled differential stress in some places, suggesting that some crustal motions are related to topographic collapse. Calculated stressing rates can be resolved onto fault planes: useful for addressing fault interactions and necessary for calculating earthquake advances or delays. As an example, I examine seismic quiescence on the Garlock fault despite a calculated minimum 0.1-0.4 MPa static stress increase from the 1857 M???7.8 Fort Tejon earthquake. Results from finite element modeling show very low to negative secular Coulomb stress growth on the Garlock fault, suggesting that the stress state may have been too low for large earthquake triggering. Thus the Garlock fault may only be stressed by San Andreas fault slip, a loading pattern that could explain its erratic rupture history.

Journal of Geophysical Research B: Solid Earth↗
USGS2007

Crustal deformation of the Yellowstone-Snake River Plain volcano-tectonic system-Campaign and continuous GPS observations, 1987-2004

The Yellowstone-Snake River Plain tectonomagmatic province resulted from Late Tertiary volcanism in western North America, producing three large, caldera-forming eruptions at the Yellowstone Plateau in the last 2 Myr. To understand the kinematics and geodynamics of this volcanic system, the University of Utah conducted seven GPS campaigns at 140 sites between 1987 and 2003 and installed a network of 15 permanent stations. GPS deployments focused on the Yellowstone caldera, the Hebgen Lake and Teton faults, and the eastern Snake River Plain. The GPS data revealed periods of uplift and subsidence of the Yellowstone caldera at rates up to 15 mm/yr. From 1987 to 1995, the caldera subsided and contracted, implying volume loss. From 1995 to 2000, deformation shifted to inflation and extension northwest of the caldera. From 2000 to 2003, uplift continued to the northwest while caldera subsidence was renewed. The GPS observations also revealed extension across the Hebgen Lake fault and fault-normal contraction across the Teton fault. Deformation rates of the Yellowstone caldera and Hebgen Lake fault were converted to equivalent total moment rates, which exceeded historic seismic moment release and late Quaternary fault slip-derived moment release by an order of magnitude. The Yellowstone caldera deformation trends were superimposed on regional southwest extension of the Yellowstone Plateau at up to 4.3 &plusmn; 0.2 mm/yr, while the eastern Snake River Plain moved southwest as a slower rate at 2.1 &plusmn; 0.2 mm/yr. This southwest extension of the Yellowstone-Snake River Plain system merged into east-west extension of the Basin-Range province. Copyright 2007 by the American Geophysical Union.

Idaho, Oregon, Utah, Wyoming↗
USGS2008

Quickly erupted volcanic sections of the Steens Basalt, Columbia River Basalt Group: Secular variation, tectonic rotation, and the Steens Mountain reversal

The Steens Basalt, now considered part of the Columbia River Basalt Group (CRBG), contains the earliest eruptions of this magmatic episode. Lava flows of the Steens Basalt cover about 50,000 km 2 of the Oregon Plateau in sections up to 1000 m thick. The large number of continuously exposed, quickly erupted lava flows (some sections contain over 200 flows) allows for small loops in the magnetic field direction paths to be detected. For volcanic rocks, this detail and fidelity are rarely found outside of the Holocene and yield estimates of eruption durations at our four sections of ∼2.5 ka for 260 m at Pueblo Mountains, 0.5 to 1.5 ka for 190 m at Summit Springs, 1–3 ka for 170 m at North Mickey, and ∼3 ka for 160 m at Guano Rim. That only one reversal of the geomagnetic field occurred during the eruption of the Steens Basalt (the Steens reversal at approximately 16.6 Ma) is supported by comparing 40 Ar/ 39 Ar ages and magnetic polarities to the geomagnetic polarity timescale. At Summit Springs two 40 Ar/ 39 Ar ages from normal polarity flows (16.72 ± ± 0.29 Ma (16.61) and 16.92 ± ± 0.52 Ma (16.82); ± ± equals 2 σ error) place their eruptions after the Steens reversal, while at Pueblo Mountains an 40 Ar/ 39 Ar age of 16.72 ± ± 0.21 Ma (16.61) from a reverse polarity flow places its eruption before the Steens reversal. Paleomagnetic field directions yielded 50 nontransitional directional-group poles which, combined with 26 from Steens Mountain, provide a paleomagnetic pole for the Oregon Plateau of 85.7°N, 318.4°E, K = 15.1, A 95 = 4.3. Comparison of this new pole with a reference pole derived from CRBG flows from eastern Washington and a synthetic reference pole for North America derived from global data implies relative clockwise rotation of the Oregon Plateau of 7.4 ± 5.0° or 14.5 ± 5.4°, respectively, probably due to northward decreasing extension of the basin and range.

Geochemistry, Geophysics, Geosystems↗
USGS2011

Brittle and ductile friction and the physics of tectonic tremor

Observations of nonvolcanic tremor provide a unique window into the mechanisms of deformation and failure in the lower crust. At increasing depths, rock deformation gradually transitions from brittle, where earthquakes occur, to ductile, with tremor occurring in the transitional region. The physics of deformation in the transition region remain poorly constrained, limiting our basic understanding of tremor and its relation to earthquakes. We combine field and laboratory observations with a physical friction model comprised of brittle and ductile components, and use the model to provide constraints on the friction and stress state in the lower crust. A phase diagram is constructed that characterizes under what conditions all faulting behaviors occur, including earthquakes, tremor, silent transient slip, and steady sliding. Our results show that tremor occurs over a range of ductile and brittle frictional strengths, and advances our understanding of the physical conditions at which tremor and earthquakes take place.

Geophysical Research Letters↗
USGS2011

Estimates of stress drop and crustal tectonic stress from the 27 February 2010 Maule, Chile, earthquake: Implications for fault strength

The great 27 February 2010 M w 8.8 earthquake off the coast of southern Chile ruptured a ∼600 km length of subduction zone. In this paper, we make two independent estimates of shear stress in the crust in the region of the Chile earthquake. First, we use a coseismic slip model constrained by geodetic observations from interferometric synthetic aperture radar (InSAR) and GPS to derive a spatially variable estimate of the change in static shear stress along the ruptured fault. Second, we use a static force balance model to constrain the crustal shear stress required to simultaneously support observed fore‐arc topography and the stress orientation indicated by the earthquake focal mechanism. This includes the derivation of a semianalytic solution for the stress field exerted by surface and Moho topography loading the crust. We find that the deviatoric stress exerted by topography is minimized in the limit when the crust is considered an incompressible elastic solid, with a Poisson ratio of 0.5, and is independent of Young's modulus. This places a strict lower bound on the critical stress state maintained by the crust supporting plastically deformed accretionary wedge topography. We estimate the coseismic shear stress change from the Maule event ranged from −6 MPa (stress increase) to 17 MPa (stress drop), with a maximum depth‐averaged crustal shear‐stress drop of 4 MPa. We separately estimate that the plate‐driving forces acting in the region, regardless of their exact mechanism, must contribute at least 27 MPa trench‐perpendicular compression and 15 MPa trench‐parallel compression. This corresponds to a depth‐averaged shear stress of at least 7 MPa. The comparable magnitude of these two independent shear stress estimates is consistent with the interpretation that the section of the megathrust fault ruptured in the Maule earthquake is weak, with the seismic cycle relieving much of the total sustained shear stress in the crust.

Maule↗
USGS2021

Can modeling the geologic record contribute to constraining the tectonic source of the AD 1755 Great Lisbon earthquake?

The precise location of the seismic source of 1755 CE Great Lisbon earthquake is still uncertain. The aim of this work is to use an onland sedimentary record in southern Portugal to test and validate seismic sources for the earthquake. To achieve this, tsunami deposit thicknesses from over 150 cores collected at Salgados in southern Portugal were compared to the results of a tsunami sediment transport model (Delft3D-FLOW) that simulates tsunami propagation, inundation, erosion, and deposition. Five different hypothetical seismic sources were modeled with varying bed roughness coefficients to assess how well they reproduced observed patterns of tsunami deposit thicknesses and dune. Modeled and observed historical tsunami arrival times were also used to test different earthquake sources. Based on these comparisons, three modeled earthquake sources were able to reproduce the observed data, suggesting they should be regarded as somewhat more likely sources for the 1755 earthquake in contrast to four other modeled sources. The fault closest to shore (Marquês de Pombal) yielded the best correlations between model and observations.

Lisbon↗
USGS2025

Magmatic volatile flux drives non-eruptive volcano-tectonic seismicity at Mount St. Helens, USA from 2008-2024

Seismicity during non-eruptive periods is useful for observing stress changes related to magmatic transport and volatile exsolution within active volcanoes. Mount St. Helens in Washington, USA, is the most active volcano in the continental United States and has been in quiescence since 2008. To explore the processes driving seismicity at Mount St. Helens, we create a high-resolution seismicity catalog of non-eruptive seismicity from 2008 through 2023, consisting of 31,133 events. We find persistent shallow seismicity (−2.2 to 2 km below sea level (BSL), 0–4.2 km below the surface) throughout the entire study period that concentrates beneath the dacite dome complex from the 1980–1986 and 2004–2008 eruptions. Additionally, there is frequent deeper seismicity (2–8 km BSL, 4.2–12.2 km below the surface) beginning in 2016. We examine a selection of deep earthquake swarms and find complex along-depth seismicity patterns. Within swarms, increases in shallow seismicity rates can precede or are concurrent with increases of deep seismicity rates. Lastly, we discover a series of semi-periodic, shallow, burst-like swarms, consisting of low-amplitude, repetitive similar earthquakes, indicating periodic valve-like release of fluid pressure from the conduit. Increased seismic activity beginning in 2016 indicates ongoing repressurization within the magmatic system driven by recharge or crystallization-induced second boiling within the upper-crustal reservoir after 2008. The data indicate that non-eruptive seismicity at Mount St. Helens is controlled by fluid pressure changes from gas flux sourced from the magma reservoir that migrates through crack networks.

Washington↗
USGS2012

On plate tectonics and the geologic evolution of southwestern North America

Very rapid subduction of the Farallon plate under southwestern North America between 60 and 40 Ma was accompanied by a relatively low volume of magmatism throughout the southwestern United States and northern Mexico. Between 40 and 20 Ma, when subduction slowed significantly and in one area may have even stopped, magmatism became widespread and voluminous from Nevada and Utah to central Mexico. This correlation of rapid subduction with a relatively low volume of magmatism can be explained by the observation that subduction-related andesitic arc volcanism, often formed in a Laramide-style compressional regime, is relatively low volume compared to continental volcanism. The shallow roots of arc volcanic systems are clearly exposed in the porphyry copper deposits found in currently active arcs and common throughout southwestern North America between 60 and 50 Ma. By 43 Ma, worldwide plate motions changed, the Pacific plate began moving away from North America, and subduction of the Farallon plate slowed. By around 36 Ma, the easternmost part of the East Pacific Rise, which was located between the Pioneer and Murray fracture zones, approached the trench and the young, hot, buoyant lithosphere appears to have clogged part of the subduction zone. Uplift on land became widespread. Voluminous continental magmatism formed the Sierra Madre Occidental (SMO) of Mexico, one of the largest batholiths in the world, as well as volcanic centers now exposed in the San Juan Mountains of Colorado and the Rio Grande Rift of New Mexico. Vectors of motion of the Pacific plate relative to the North American plate determined by Stock and Molnar (1988) are consistent with formation of a transtensional environment along the plate boundary sufficient to create a 100- to 200-km-wide void just landward of the old volcanic arc. While the SMO batholith was forming within this void, the Monterey and Arguello microplates just offshore to the west were broken off from the Farallon plate and rotated so that the East Pacific Rise in this immediate area became nearly perpendicular to the trench and perpendicular to the vector of motion of the Pacific plate relative to North America. Formation of the SMO batholith was followed between 24 and 20 Ma by a major increase in the rate of subduction of the Guadalupe plate, a fragment of the former Farallon plate, and by increasing mylonitization, extension, and uplift in the metamorphic core complexes that extend northwestward through southern Arizona from the northern end of the SMO batholith. The plate margin underwent another major change between 12.5 and 10 Ma when subduction again stopped, strike slip faulting became dominant along the coast, the Basin and Range Province opened, and numerous tectonostratigraphic terranes in southern California underwent large rotations. By 3 Ma a large, new terrane had been severed from North America immediately west of the SMO batholith as the Gulf of California opened. These observations can be explained by a model for the weakening and ultimate falling apart of the uppermost part of the subducted oceanic plate in the 20–30 m.y. after the end of rapid subduction. As the plate falls apart, not only is compressional stress relieved, but significant backslip along the old subduction zone is also possible, perhaps bringing blueschists rapidly upward from 20- to 30-km depths.

Journal of Geophysical Research↗
USGS2012

The 40Ar/39Ar ages and tectonic setting of the Middle Eocene northeast Nevada volcanic field

Widespread middle to late Eocene calc-alkalic volcanism, which formed the Northeast Nevada Volcanic Field, marks the earliest Tertiary volcanism in the northern Basin and Range. The central part of this major field in northeast Nevada and adjacent Utah is herein defined by 23 40 Ar/ 39 Ar ages that range from 42.6 to 39.0 Ma, rock chemistry from 12 localities, stratigraphic position of the volcanic rocks above a regional middle Eocene unconformity, volcanic setting, and lithology. The type area is at Nanny Creek, in the northern Pequop Mountains, Nevada, where rhyolite ash flow tuffs are overlain by a thick section of intercalated andesitic to dacitic flows and flow breccias and rhyolite ash flow tuffs. The intermediate composition rocks are locally derived throughout the volcanic field, whereas the sources for rhyolite ash flow tuffs are unknown. The uniform and widespread occurrence of the andesitic and dacitic flows and flow breccias strongly suggests that the upper crust was perforated by intermediate composition magma across the entire region. In the central part of the field the middle Eocene volcanic rocks rest with depositional angular discordance on deformed middle Paleozoic to Triassic strata; ostracode-bearing limestone, probably of early Eocene age, is locally present below the volcanic rocks. In the western and southeastern parts of the field these middle Eocene volcanic rocks rest with depositional angular discordance on lower Eocene lacustrine strata of the Elko and White Sage Formations, respectively. This angular discordance documents a middle Eocene deformational event previously unrecognized in the region.

Journal of Geophysical Research↗
USGS1997

Tectonic evolution of the central Brooks Range mountain front: Evidence from the Atigun Gorge region

Atigun Gorge, at the northern front of the eastern Endicott Mountains, contains well-exposed rocks of the upper part of the Endicott Mountains allochthon and rocks of the structurally higher Picnic Creek or Ipnavik River allochthon. These allochthons contain rocks as young as Early Cretaceous (Valanginian) and are separated by a nearly vertical fault zone that contains exotic blocks of Triassic and Jurassic chert and silicified mudstone. Siliceous rocks of this type are not present in the Endicott Mountains allochthon but are characteristic of the Picnic Creek, Ipnavik River, and some of the other allochthons that structurally overlie the Endicott Mountains allochthon in the central and western Brooks Range. These exotic blocks, therefore indicate that structurally higher rocks of either the Picnic Creek or Ipnavik River allochthon were emplaced during the Early Cretaceous and are preserved along the northern flank of the eastern Endicott Mountains. The deformed thickness of this higher allochthon in the subsurface north of the mountains is unknown but probably exceeds 2 kilometers. Similar relations are mapped east of Atigun Gorge in an area of structural transition from the eastern Endicott Mountains into the northern Philip Smith Mountains, which are formed by the parautochthonous North Slope stratigraphic assemblage. The allochthonous rocks at the mountain front are regionally unconformably overlain by proximal Lower Cretaceous (Albian) foredeep conglomerate at the southern flank of the Colville basin, but at Atigun Gorge, the base of these deposits is interpreted as a possible back thrust at a triangle zone. Conglomerate clasts in the foredeep deposits are dominantly chert, mafic igneous rock, and other lithologies characteristic of the Picnic Creek and Ipnavik River allochthons and scattered clasts from the Endicott Mountains allochthon. The conglomerates show that the chert-rich allochthonous rocks and the Endicott Mountains allochthon were emplaced in the north-central Brooks Range by large-scale crustal shortening (>300 km) between the Valanginian and Albian (∼135 to ∼112 Ma). This orogenic event significantly postdates early stages of Brooks Range orogeny but predates later stages of orogeny documented by stratigraphic and apatite fission-track data. These relations reduce the magnitude of shortening inferred at the triangle zone at the Brooks Range mountain front. The outcrop data suggest that some of the strata preserved at a structurally low level north of the mountain front and visible in the seismic data of the Trans-Alaska Crustal Transect (TACT) may consist of clastic sedimentary rocks of the structurally higher Picnic Creek or Ipnavik River allochthon.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Tectonic relations of carbon dioxide discharges and earthquakes

CO 2 ‐rich springs occur worldwide along major zones of seismicity. They are mostly in young orogenic belts, but some are in areas of rifting continental platforms. Analyses of 13 C content indicate that much of the CO 2 is derived from the mantle and that other important sources are the metamorphism of marine carbonate‐bearing sedimentary rocks and the degradation of organic material. The presence of calc‐silicate minerals, such as pumpellyite in metagraywacke, is evidence of former conversion of carbonate‐bearing rocks into calc‐silicate minerals and release of CO 2 . The CO 2 pressure in fractured rocks of a fault zone reduces the effective normal stress and, if it is sufficiently great, allows the fault to slip. If the pressure were maintained at a sufficiently high level, the fault behavior might be characterized by frequent small earthquakes and aseismic creep such as occur along active segments of the San Andreas system. The presence of CO 2 ‐rich springs may indicate a potentially hazardous seismic region. Monitoring of CO 2 discharges could be useful in earthquake prediction.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Tectonic stresses in the lithosphere: constraints provided by the experimental deformation of rocks.

The strengths of rocks clearly place an upper limit on the stress that can be sustained by the upper half of the lithosphere. Laboratory data on rock rheology are generally lacking at intermediate temperatures and pressures on the important rock types expected in the lithosphere, so a definitive accounting of the strength distribution with depth in the upper lithosphere is presently unattainable. Analogies are drawn between the fragmentary strength data on silicates at intermediate temperature and the more extensive experimental data on marble and limestone, and several tentative conclusions are drawn: First, brittle processes, such as faulting and cataclasis, are expected to control rock strength at low pressures and temperatures. The strengths associated with these brittle mechanisms increase rapidly with increasing effective pressure and are relatively insensitive to temperature and strain rate. Second, the transitions between brittle and ductile processes occur at critical values of the least principal stress σ 3 . I suggest that the concept of the deformation mechanism map of Ashby (1972) be extended to brittle-ductile transitions by normalizing the applied differential stress σ by σ 3 , i.e., the transitions occur at critical values of σ/σ 3 . Third, the high temperature flow law of olivine, widely applied to problems involving flow in the asthenosphere, is inappropriate to the conditions of temperature found in the lithosphere, because different dislocation flow mechanisms dominate at low to intermediate temperatures. The fragmentary rheological data suggest the following rheological structure of the lithosphere where it is inelastically deforming: A rapid pressure-driven increase in rock strength with depth culminates with a shear strength maximum of up to 8 kbar at depths that depend on the state of stress and on the temperature distribution. A review of the mechanisms of weakening associated with water suggests that water weakening effects are probably not important in the oceanic lithosphere but are likely to be controlling in the continental crust.

Journal of Geophysical Research Solid Earth↗
USGS2012

Tectonic setting for ophiolite obduction in Oman

The Samail ophiolite is part of an elongate belt in the Middle East that forms an integral part of the Alpine mountain chains that make up the northern boundary of the Arabian-African plate. The Samail ophiolite represents a portion of the Tethyan ocean crust formed at a spreading center of Middle Cretaceous age (Cenomanian). During the Cretaceous spreading of the Tethyan Sea, Gondwana Land continued its dispersal, and the Arabian-African plate drifted northward about 10°. These events combined with the opposite rotation of Eurasia and Africa initiated the closing of the Tethyan during the Late Cretaceous. At the early stages of closure, downwarping of the Arabian continental margin combined with the compressional forces of closure from the Eurasian plate initiated obduction of the Tethyan oceanic crust along preexisting transform faults, and still hot oceanic crust was detached along oblique northeast dipping thrust faults. Amphibolites developed at the base of the detached hot peridotite as it was thrust southward over oceanic volcanic and sedimentary rocks. Plate configurations combined with palinspastic reconstructions show that subduction and attendant large-scale island arc volcanism did not commence until after the Tethyan sea began to close and after the Samail ophiolite was emplaced southward across the Arabian continental margin. The Samail ophiolite nappe now rests upon a melange consisting mainly of pelagic sediments, volcanics, and detached fragments of the basal amphibolites which in turn rest on autochthonous shelf carbonates of the Arabian platform. Laterites and conglomerates with reworked laterites on the eroded upper surface of the ophiolite indicate a period of emergence prior to the deposition of shallow water Maestrichtian carbonates. Following emplacement (Eocene) of the Samail ophiolite, the Tethyan oceanic crust began northward subduction, and active arc volcanism started just north of the present Jaz Murian depression in Iran.

Journal of Geophysical Research Solid Earth↗
USGS2012

Earthquakes in the Orozco transform zone: seismicity, source mechanisms, and tectonics

As part of the Rivera Ocean Seismic Experiment, a network of ocean bottom seismometers and hydrophones was deployed in order to determine the seismic characteristics of the Orozco transform fault in the central eastern Pacific. We present hypocentral locations and source mechanisms for 70 earthquakes recorded by this network. All epicenters are within the transform region of the Orozco Fracture Zone and clearly delineate the active plate boundary. About half of the epicenters define a narrow line of activity parallel to the spreading direction and situated along a deep topographic trough that forms the northern boundary of the transform zone (region 1). Most focal depths for these events are very shallow, within 4 km of the seafloor; several well-determined focal depths, however, are as great as 7 km. No shallowing of seismic activity is observed as the rise-transform intersection is approached; to the contrary, the deepest events are within 10 km of the intersection. First motion polarities for most of the earthquakes in region 1 are compatible with right-lateral strike slip faulting along a nearly vertical plane, striking parallel to the spreading direction. Another zone of activity is observed in the central part of the transform (region 2). The apparent horizontal and vertical distribution of activity in this region is more scattered than in the first, and the first motion radiation patterns of these events do not appear to be compatible with any known fault mechanism. Pronounced lateral variations in crustal velocity structure are indicated for the transform region from refraction data and measurements of wave propagation directions. The effect of this lateral heterogeneity on hypocenters and fault plane solutions is evaluated by tracing rays through a three-dimensional velocity grid. While findings for events in region 1 are not significantly affected, in region 2, epicentral mislocations of up to 10 km and azimuthal deflections of up to 45&deg; may result from assuming a laterally homogeneous velocity structure. When corrected for the effects of lateral heterogeneity, the epicenters and fault plane solutions for earthquakes in region 2 are compatible with predominantly normal faulting along a topographic trough trending NW&ndash;SE; the focal depths, however, are poorly constrained. These results suggest an en echelon spreading center or leaky transform regime in the central transform region.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Interpretation of gravity data in a complex volcano-tectonic setting, southwestern Nevada

This regional gravity study, based on an irregular 2-km data grid, was conducted during the past few years at Yucca Mountain, southern Nye County, Nevada, as part of a program to locate a suitable repository for high-level nuclear waste. About 100 surface rock samples, three borehole gamma-gamma logs, and one borehole gravity study provide excellent density control. A nearly linear increase in density of 0.26 g/cm 3 per kilometer of depth is indicated in the thick tuff sequences that underlie the mountain. Isostatic and 2.0-g/cm 3 Bouguer corrections were applied to the observed gravity values to remove regional gradients and topographic effects, respectively. The Bare Mountain gravity high, with an isostatic anomaly maximum of 48 mGal, is connected with a greater gravity high over the Funeral Mountains, to the southwest; together, these highs result from a continuous block of dense, metamorphosed Precambrian and Paleozoic rocks that stretches across much of the Walker Lane from the east edge of Death Valley to Bare Mountain. The Calico Hills gravity high appears more likely to originate from a northeast trending buried ridge of Paleozoic rocks that extends southwestward beneath Busted Butte, 5 km southeast of the proposed repository, where two- and three-dimensional modeling indicates that the pre-Cenozoic rocks lie less than 1000 m beneath the surface. Tuff, at least 4000 m thick, fills a large steep-sided depression in the pretuff rocks beneath Yucca Mountain and Crater Flat. The gravity low and the thick tuff section lie within a large collapse area that includes the Crater Flat-Timber Mountain-Silent Canyon caldera complexes. Gravity lows in Crater Flat itself are interpreted to coincide with the source areas of the Prow Pass Member, the Bullfrog Member, and the Tram Member of the Crater Flat Tuff; these source areas add nearly 350 km 2 to the previously recognized extent of the local caldera complexes. Southward extension of the broad gravity low associated with Crater Flat into the Amargosa Desert is evidence for sector graben-type collapse segments related to the formation of the Timber Mountain caldera and superimposed on the other volcanic and extensional structures within Crater Flat.

Journal of Geophysical Research Solid Earth↗