USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing Information”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources

Fire rehabilitation effectiveness: a chronosequence approach for the Great Basin

Federal land management agencies have invested heavily in seeding vegetation for emergency stabilization and rehabilitation (ES&R) of non-forested lands. ES&R projects are implemented to reduce post-fire dominance of non-native annual grasses, minimize probability of recurrent fire, quickly recover lost habitat for sensitive species, and ultimately result in plant communities with desirable characteristics including resistance to invasive species and resilience or ability to recover following disturbance. Land managers lack scientific evidence to verify whether seeding non-forested lands achieves their desired long-term ES&R objectives. The overall objective of our investigation is to determine if ES&R projects increase perennial plant cover, improve community composition, decrease invasive annual plant cover and result in a more desirable fuel structure relative to no treatment following fires while potentially providing habitat for Greater Sage-Grouse, a species of management concern. In addition, we provide the locations and baseline vegetation data for further studies relating to ES&R project impacts. We examined effects of seeding treatments (drill and broadcast) vs. no seeding on biotic and abiotic (bare ground and litter) variables for the dominant climate regimes and ecological types within the Great Basin. We attempted to determine seeding effectiveness to provide desired plant species cover while restricting non-native annual grass cover relative to post-treatment precipitation, post-treatment grazing level and time-since-seeding. Seedings were randomly sampled from all known post-fire seedings that occurred in the four-state area of Idaho, Nevada, Oregon and Utah. Sampling locations were stratified by major land resource area, precipitation, and loam-dominated soils to ensure an adequate spread of locations to provide inference of our findings to similar lands throughout the Great Basin. Nearly 100 sites were located that contained an ES&R project. Of these sites, 61 were seeded by using a drill, 27 were broadcast aerially, and 12 had a combination of both. We randomly sampled three burned and seeded, burned and unseeded, and unburned and unseeded locations in the vicinity of the fire, each within the same ecological site. We measured foliar cover of all plant functional groups (perennial or annual, shrub, grass, forb, native or introduced), biological soil crusts, and abiotic (bare soil and litter) variables using the line-point intercept protocol. Fuel loads and horizontal fuel continuity were measured. We applied linear mixed models to response variables (cover and density of plant groups) relative to the dependent variables (seeding treatments and precipitation/temperature relationships. Post-fire strengths with native perennial grasses or shrubs in mixes did not increase density or cover of these groups significantly relative to unseeded, burned areas. Seeded non-native perennial grasses and the shrub Bassia prostrata were effective in providing more cover in aerial and drill seedings. Seeded non-native perennial grass cover increased with increased annual precipitation regardless of seeding type. Seeding native shrubs, particularly Artemisia tridentata, did not significantly increase shrub cover in burned areas. Cover of undesirable non-native annual grasses was lower in drill seedings relative to unseeded areas but only at higher elevations. Seeding effectiveness after wildfire is unpredictable in drier, low elevation environments, and our findings indicate management objectives are more likely met when focusing efforts on higher elevation or higher precipitation locations where establishment of perennial grasses is more likely. On sites where potential for invasion and dominance of non-native annuals is high, such as lower and drier sites, intensive methods of restoration that include invasive plant control before seeding may be required. Where establishment of native perennial plants is the goal, managers might consider using native-only seed mixtures, because we found that the non-native perennials typically used in Great Basin restoration efforts are selected for their competitive nature and may reduce establishment of less competitive native species. Although we attempted to include information on livestock grazing history after seedings, we were unable to extract sufficient data from files to address this topic that may play an additional role in understanding native plant abundance post-fire seeding. Evaluation of drill and aerial seeding effects on fuel characteristics focused on two metrics that are standard inputs for fire behavior models, fuel load and fuel continuity. Fuel loads were evaluated separately for total fuel load biomass, and the individual components that sum to total biomass, namely herbaceous, shrub, shrub:herbaceous ratio, litter, 10-hour, and 100-hour fuel biomasses. Fuel continuity was evaluated using the following cover categories, total, annual grass, annual forb, perennial forb perennial grass, shrub, litter, vegetative interspace, and perennial interspace. Drill seeding did not affect fuel loads, except to reduce 10-hour fuels, probably due to mechanical destruction of dead and down fuels by the drill seeding equipment. Drill seeding did affect fuel continuity, specifically decreasing total plant cover by increasing perennial grass cover which suppressed annual grass and litter production resulting in a net decrease in continuity, but only at the elevations above approximately 1500m. Aerial seeding had no effect on any fuel load or fuel continuity category. For the Greater Sage-Grouse habitat study, we developed multi-scale empirical models of sage-grouse occupancy in 211 randomly located plots within a 40 million ha portion of the species’ range. We then used these models to predict sage-grouse habitat quality at 101 ES&R seeding projects. We compared conditions at restoration sites to published habitat guidelines. Sage-grouse occupancy was positively related to plot- and landscape-level dwarf sagebrush (Artemisia arbuscula, A. nova, A. tripartita) and big sagebrush steppe, and negatively associated with non-native grass and human development. The predicted probability of sage-grouse occupancy at treated plots was low on average (0.07–0.09) and was not significantly different from burned areas that had not been treated. Restoration was more often successful at higher elevation sites with low annual temperatures, high spring precipitation, and high plant diversity. No plots seeded after fire (n=313) met all overstory guidelines for breeding habitats, but approximately 50% met understory guidelines, particularly for perennial grasses. This trend was similar for summer habitat. Ninety-eight percent of treated plots did not meet winter habitat guidelines. Restoration actions in burned areas did not increase the probability of meeting most guideline criteria. The probability of meeting guidelines was influenced by a latitudinal gradient, local climate, and topography. Post-fire seeding treatments in Great Basin sagebrush shrublands generally have not created high quality habitat for sage-grouse. Understory conditions are more likely to be adequate than those of overstory, but in unfavorable climates, establishing forbs and reducing cheatgrass dominance is unlikely. Reestablishing sagebrush cover will require more than 20 years using the restoration methods of the past two decades. Given current fire frequencies and restoration capabilities, protection of landscapes containing a mix of dwarf sagebrush and big sagebrush steppe, minimal human development, and low non-native plant cover may provide the best opportunity for conservation of sage-grouse habitats. Our database of ES&R locations has used the Land Treatment Digital Library to archive data and location information regarding our study (see Pilliod and Welty 2013). This has contributed to two additional studies. One examined the potential spread of Bassia prostrata (aka Kochia prostrata; forage kochia) from ES&R project locations (Gray and Muir 2013). The second used remote sensing to determine the phenology of vegetation green-up on post-fire seeded sites (Sankey et al. 2013).

California;Idaho;Oregon;Utah↗

Remotely sensing the morphometrics and dynamics of a cold region dune field using historical aerial photography and airborne LiDAR data

This study uses an airborne Light Detection and Ranging (LiDAR) survey, historical aerial photography and historical climate data to describe the character and dynamics of the Nogahabara Sand Dunes, a sub-Arctic dune field in interior Alaska’s discontinuous permafrost zone. The Nogahabara Sand Dunes consist of a 43-km 2 area of active transverse and barchanoid dunes within a 3200-km 2 area of vegetated dune and sand sheet deposits. The average dune height in the active portion of the dune field is 5.8 m, with a maximum dune height of 28 m. Dune spacing is variable with average crest-to-crest distances for select transects ranging from 66–132 m. Between 1952 and 2015, dunes migrated at an average rate of 0.52 m a −1 . Dune movement was greatest between 1952 and 1978 (0.68 m a −1 ) and least between 1978 and 2015 (0.43 m a −1 ). Dunes migrated predominantly to the southeast; however, along the dune field margin, net migration was towards the edge of the dune field regardless of heading. Better constraining the processes controlling dune field dynamics at the Nogahabara dunes would provide information that can be used to model possible reactivation of more northerly dune fields and sand sheets in response to climate change, shifting fire regimes and permafrost thaw.

Remote Sensing↗

Radar and optical mapping of surge persistence and marsh dieback along the New Jersey Mid-Atlantic coast after Hurricane Sandy

This study combined a radar-based time series of Hurricane Sandy surge and estimated persistence with optical sensor-based marsh condition change to assess potential causal linkages of surge persistence and marsh condition change along the New Jersey Atlantic Ocean coast. Results based on processed TerraSAR-X and COSMO-SkyMed synthetic aperture radar (SAR) images indicated that surge flooding persisted for 12 h past landfall in marshes from Great Bay to Great Egg Harbor Bay and up to 59 h after landfall in many back-barrier lagoon marshes. Marsh condition change (i.e. loss of green marsh vegetation) was assessed from optical satellite images (Satellite Pour l’Observation de la Terre and Moderate Resolution Imaging Spectroradiometer) collected before and after Hurricane Sandy. High change in condition often showed spatial correspondence, with high surge persistence in marsh surrounding the lagoon portion of Great Bay, while in contrast, low change and high persistence spatial correspondence dominated the interior marshes of the Great Bay and Great Egg Harbor Bay estuaries. Salinity measurements suggest that these areas were influenced by freshwater discharges after landfall possibly mitigating damage. Back-barrier marshes outside these regions exhibited mixed correspondences. In some cases, topographic features supporting longer surge persistence suggested that non-correspondence between radar and optical data-based results may be due to differential resilience; however, in many cases, reference information was lacking to determine a reason for non-correspondence.

New Jersey↗

GIS applications for military operations in coastal zones

In order to successfully support current and future US military operations in coastal zones, geospatial information must be rapidly integrated and analyzed to meet ongoing force structure evolution and new mission directives. Coastal zones in a military-operational environment are complex regions that include sea, land and air features that demand high-volume databases of extreme detail within relatively narrow geographic corridors. Static products in the form of analog maps at varying scales traditionally have been used by military commanders and their operational planners. The rapidly changing battlefield of 21st Century warfare, however, demands dynamic mapping solutions. Commercial geographic information system (GIS) software for military-specific applications is now being developed and employed with digital databases to provide customized digital maps of variable scale, content and symbolization tailored to unique demands of military units. Research conducted by the Center for Remote Sensing and Mapping Science at the University of Georgia demonstrated the utility of GIS-based analysis and digital map creation when developing large-scale (1:10,000) products from littoral warfare databases. The methodology employed-selection of data sources (including high resolution commercial images and Lidar), establishment of analysis/modeling parameters, conduct of vehicle mobility analysis, development of models and generation of products (such as a continuous sea-land DEM and geo-visualization of changing shorelines with tidal levels)-is discussed. Based on observations and identified needs from the National Geospatial-Intelligence Agency, formerly the National Imagery and Mapping Agency, and the Department of Defense, prototype GIS models for military operations in sea, land and air environments were created from multiple data sets of a study area at US Marine Corps Base Camp Lejeune, North Carolina. Results of these models, along with methodologies for developing large-scale littoral warfare databases, aid the National Geospatial-Intelligence Agency in meeting littoral warfare analysis, modeling and map generation requirements for US military organizations. ?? 2008 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS).

ISPRS Journal of Photogrammetry and Remote Sensing↗

Multiscale habitat use and selection in cooperatively breeding Micronesian kingfishers

Information about the interaction between behavior and landscape resources is key to directing conservation management for endangered species. We studied multi-scale occurrence, habitat use, and selection in a cooperatively breeding population of Micronesian kingfishers (Todiramphus cinnamominus) on the island of Pohnpei, Federated States of Micronesia. At the landscape level, point-transect surveys resulted in kingfisher detection frequencies that were higher than those reported in 1994, although they remained 15-40% lower than 1983 indices. Integration of spatially explicit vegetation information with survey results indicated that kingfisher detections were positively associated with the amount of wet forest and grass-urban vegetative cover, and they were negatively associated with agricultural forest, secondary vegetation, and upland forest cover types. We used radiotelemetry and remote sensing to evaluate habitat use by individual kingfishers at the home-range scale. A comparison of habitats in Micronesian kingfisher home ranges with those in randomly placed polygons illustrated that birds used more forested areas than were randomly available in the immediate surrounding area. Further, members of cooperatively breeding groups included more forest in their home ranges than birds in pair-breeding territories, and forested portions of study areas appeared to be saturated with territories. Together, these results suggested that forest habitats were limited for Micronesian kingfishers. Thus, protecting and managing forests is important for the restoration of Micronesian kingfishers to the island of Guam (United States Territory), where they are currently extirpated, as well as to maintaining kingfisher populations on the islands of Pohnpei and Palau. Results further indicated that limited forest resources may restrict dispersal opportunities and, therefore, play a role in delayed dispersal and cooperative behaviors in Micronesian kingfishers.

Journal of Wildlife Management↗

MODIS derived vegetation index for drought detection on the San Carlos Apache Reservation

A variety of vegetation indices derived from remotely sensed data have been used to assess vegetation conditions, enabling the identification of drought occurrences as well as the evaluation of drought impacts. Moderate Resolution Imaging Spectroradiometer (MODIS) Terra 8-day composite data were used to compute the Modified Soil Adjusted Vegetation Index II (MSAVI 2 ) of four dominant vegetation types over a 13-year period (2002 – 2014) on the San Carlos Apache Reservation in Arizona, US. MSAVI 2 anomalies were used to identify adverse impacts of drought on vegetation, characterized as mean MSAVI 2 below the 13-year average. In terms of interannual variability, we found similar responses between grassland and shrubland, and between woodland and forest vegetation types. We compared MSAVI 2 for specific vegetation types with precipitation data at the same time step, and found a lag time of roughly two months for the peak MSAVI 2 values following precipitation in a given year. All vegetation types responded to summer monsoon rainfall, while shrubland and annual herbaceous vegetation also displayed a brief spring growing season following winter snowmelt. MSAVI 2 values of shrublands corresponded well with precipitation variability both for summer rainfall and winter snowfall, and can be potentially used as a drought indicator on the San Carlos Apache Reservation given its wide geographic distribution. We demonstrated that moderate temporal frequency satellite-based MSAVI 2 can provide drought monitoring to inform land management decisions, especially on vegetated tribal land areas where in situ precipitation data are limited.

International Journal of Advanced Remote Sensing a↗

High-resolution observations of submarine groundwater discharge reveal the fine spatial and temporal scales of nutrient exposure on a coral reef: Faga'alu, AS

Submarine groundwater discharge (SGD) can deliver substantial nutrient and contaminant loads to nearshore coral reefs. Correctly scaling SGD rates from a point source to a reef is generally a linear process involving simplified assumptions on the hydrogeology, bathymetry, and nearshore hydrodynamics that are essential to properly assess SGD scale and impact to individual coral heads. Here, we apply high-resolution SGD techniques to provide information at the scale of individual coral heads in Faga’alu Bay, American Samoa, where focused SGD delivers a plume of freshened and nutrient-rich water directly to the adjacent coral reef. Unoccupied Aerial System-based measurements were used to acquire remotely sensed, calibrated, high-resolution thermal infrared imagery that were coupled with traditional in-situ SGD observations. This approach permits a detailed assessment of SGD and associated nutrient loadings to individual coral heads as a function of time and enables a more realistic method to quantify SGD impact.

Faga’alu Bay↗

Synergistic use of optical and InSAR data for urban impervious surface mapping: A case study in Hong Kong

A wide range of urban ecosystem studies, including urban hydrology, urban climate, land use planning and watershed resource management, require accurate and up‐to‐date geospatial data of urban impervious surfaces. In this study, the potential of the synergistic use of optical and InSAR data in urban impervious surface mapping at the sub‐pixel level was investigated. A case study in Hong Kong was conducted for this purpose by applying a classification and regression tree (CART) algorithm to SPOT 5 multispectral imagery and ERS‐2 SAR data. Validated by reference data derived from high‐resolution colour‐infrared (CIR) aerial photographs, our results show that the addition of InSAR feature information can improve the estimation of impervious surface percentage (ISP) in comparison with using SPOT imagery alone. The improvement is especially notable in separating urban impervious surface from the vacant land/bare ground, which has been a difficult task in ISP modelling with optical remote sensing data. In addition, the results demonstrate the potential to map urban impervious surface by using InSAR data alone. This allows frequent monitoring of world's cities located in cloud‐prone and rainy areas.

International Journal of Remote Sensing↗

A new global 1-km dataset of percentage tree cover derived from remote sensing

Accurate assessment of the spatial extent of forest cover is a crucial requirement for quantifying the sources and sinks of carbon from the terrestrial biosphere. In the more immediate context of the United Nations Framework Convention on Climate Change, implementation of the Kyoto Protocol calls for estimates of carbon stocks for a baseline year as well as for subsequent years. Data sources from country level statistics and other ground-based information are based on varying definitions of 'forest' and are consequently problematic for obtaining spatially and temporally consistent carbon stock estimates. By combining two datasets previously derived from the Advanced Very High Resolution Radiometer (AVHRR) at 1 km spatial resolution, we have generated a prototype global map depicting percentage tree cover and associated proportions of trees with different leaf longevity (evergreen and deciduous) and leaf type (broadleaf and needleleaf). The product is intended for use in terrestrial carbon cycle models, in conjunction with other spatial datasets such as climate and soil type, to obtain more consistent and reliable estimates of carbon stocks. The percentage tree cover dataset is available through the Global Land Cover Facility at the University of Maryland at http://glcf.umiacs.umd.edu.

Global Change Biology↗

Monitoring long-term changes of urban surface temperature using time-series land cover and remote sensing data across 50 major cities in the United States

The increase of developed land changes the Earth’s ecosystems and, in doing so, impacts the natural environment and further affects the services it provides to humans. Urban growth and associated land cover transitions alter the thermal and physical properties of the land surface, resulting in surface temperature change in urban areas. In this study, we integrated both land cover and surface temperature information to characterize surface temperature spatiotemporal variations using the recently available time series of Landsat land surface temperature and annual land change products. We analyzed over thirty-year trends of land surface temperature (LST) in urban and surrounding non-urban lands. We found that the transitions of different land cover types to urban affected urban LST trends differently, and further impacted the temporal trend of urban heat island intensity.

continental United States↗

Archiving and access systems for remote sensing: Chapter 6

Focuses on major developments inaugurated by the Committee on Earth Observation Satellites, the Group on Earth Observations System of Systems, and the International Council for Science World Data System at the global level; initiatives at national levels to create data centers (e.g. the National Aeronautics and Space Administration (NASA) Distributed Active Archive Centers and other international space agency counterparts), and non-government systems (e.g. Center for International Earth Science Information Network). Other major elements focus on emerging tool sets, requirements for metadata, data storage and refresh methods, the rise of cloud computing, and questions about what and how much data should be saved. The sub-sections of the chapter address topics relevant to the science, engineering and standards used for state-of-the-art operational and experimental systems.

Book chapter↗

Geologic remote sensing

Remote-sensing techniques are now being used routinely in geologic interpretation for mineral and energy exploration, plant siting, waste disposal, and the development of models for regional and continental tectonics. New spaceborne methods and associated technologies are being developed to produce data from which geologic information about large areas can be derived much more rapidly than by conventional techniques.

Science↗

Field and laboratory determination of water-surface elevation and velocity using noncontact measurements

Noncontact methods for measuring water-surface elevation and velocity in laboratory flumes and rivers are presented with examples. Water-surface elevations are measured using an array of acoustic transducers in the laboratory and using laser scanning in field situations. Water-surface velocities are based on using particle image velocimetry or other machine vision techniques on infrared video of the water surface. Using spatial and temporal averaging, results from these methods provide information that can be used to develop estimates of discharge for flows over known bathymetry. Making such estimates requires relating water-surface velocities to vertically averaged velocities; the methods here use standard relations. To examine where these relations break down, laboratory data for flows over simple bumps of three amplitudes are evaluated. As anticipated, discharges determined from surface information can have large errors where nonhydrostatic effects are large. In addition to investigating and characterizing this potential error in estimating discharge, a simple method for correction of the issue is presented. With a simple correction based on bed gradient along the flow direction, remotely sensed estimates of discharge appear to be viable.

Conference Paper↗

K1-95-HW: Cruise report 1995 - Preliminary results, phase III: Sediment chemistry and biological sampling survey

Mamala Bay, off the south shore of the island of Oahu, has been used as a repository of dredged material primarily from Pearl and Honolulu Harbors for over a century. The U.S. Geological Survey, U.S. Army Corps of Engineers, and the U.S. Environmental Protection Agency are conducting an integrated study on the distribution and character of dredged materials as well as the effects of dredged material on the marine environment. A three phase study is providing information to evaluate the effects on seafloor substrate and the benthic fauna. The studies include geophysical profiling and imaging, bottom photography, sampling, chemical and physical analyses of sediment, and evaluations of the benthic population, population density, and adverse impacts to the benthic fauna. Phase 1, conducted in 1993, inventoried the seafloor via remote sensing. Sidescan sonar and subbottom profilers characterized the seafloor in and around the disposal sites, and the resulting products reveal the character and extent of the dredged material. These data were used to plan Phase 2 in 1994, a sampling program that employed subbottom profilers, video and still photography, and seafloor sampling to ground truth the sonar mosaic and identify the seafloor substrates responsible for the various acoustic signatures on the sonar images and subbottom profiles. Box coring provided the samples necessary to distinguish dredged material from native sediment, and for the chemical analyses used to determine contaminant concentrations. Phase 3 studies conducted in June of 1995 consisted of box core sampling for chemical and biological analyses. Specific studies include: infaunal taxonomy and population density, bioassay/bioaccumulation, sediment chemistry, and post-disposal resuspension and transport. The 1995 survey, conducted June 14 through 17, resulted in the collection of 39 box cores from 20 different stations. Multiple box cores were composited at 7 different locations occupied in 1994, to provide the material required for the 7 bioassay and bioaccumulation analyses currently underway (Figure 1). Seventeen of the 20 stations occupied provided the biological samples for the benthic infaunal identification and population density study conducted by Dr. Julie Brock of the University of Hawaii, and the sediment chemistry analyses conducted (and completed) by Quanterra Environmental Laboratories (Figure 1). Seven of the 20 stations occupied in 1995 were occupied in 1994, and provide the data for direct comparison of sediment chemistry at the same sites from two consecutive years. The sum total of the data collected from all three phases of the monitoring program will provide the U.S. Army Corps of Engineers and the U.S. Environmental Protection Agency with the information required to make informed decisions as to the management of the South Oahu disposal site in Mamala Bay.

Hawai'i↗

Using remote sensing to quantify ecosystem site potential community structure and deviation in the Great Basin, United States

The semi-arid Great Basin region in the Northwest U.S. is impacted by a suite of change agents including fire, grazing, and climate variability to which native vegetation can have low resilience and resistance. Assessing ecosystem condition in relation to these change agents is difficult due to a lack of a consistent and objective Site Potential (SP) information of the conditions biophysically possible at each site. Our objectives were to assess and quantify patterns in ecosystem condition, based on actual fractional component cover and a SP map and to evaluate drivers of change. We used long-term 90th percentile Landsat NDVI(Normalized Difference Vegetation Index) and biophysical variables to produce a map of SP. Ecosystem condition was assessed using two methods, first we integrated fractional components into an index which was regressed against SP. Regression confidence intervals were used to segment the study area into normal, over-, and under-performing relative to SP. Next, the relationships between SP and fractional component cover produced SP expected component cover, from which we mapped the actual cover deviation. Much of the study area is within the range of conditions expected by the SP model, but degraded conditions are more common than those above SP expectations. We found that shrub cover deviation is more positive at higher elevation, while herbaceous cover deviation has the opposite pattern, supporting the hypothesis that more resistant and resilient sites are less likely to change from the shrub dominated legacy. Another key finding was that regions with significant annual herbaceous invasions tend to have lower than expected bare ground and shrub cover.

Great Basin↗

Remote sensing of volcano deformation and surface change

Volcanic unrest and eruptions are associated with surface deformation and landscape change that can be detected, characterized, and tracked via remote sensing measurements. Subsurface processes, including magma accumulation, withdrawal, and transport, can cause displacements at the surface that are best tracked at subaerial volcanoes with interferometric synthetic aperture radar (InSAR) and Global Navigation Satellite System (GNSS) measurements, although non-volcanic activity, like hydrothermal and tectonic sources, can complicate interpretations. Surface change is often associated with the emplacement of volcanic deposits, which modify the landscape and can experience post-emplacement deformation or morphological changes over time. Measurement of surface topography at volcanoes via remote means is a particularly important capability, given the control that topography exerts on many volcanic hazards and the potential for topographic change measurements to provide information about eruption rates. A much broader set of tools is available to investigate surface change at volcanoes, including not only InSAR and GNSS, but also synthetic aperture radar amplitude data, visible imagery, and lidar, acquired from airborne, ground-based, and satellite platforms. These data can also be used to identify instability of volcanic flanks and even have potential for use in detecting airborne ash plumes. Although hidden from traditional airborne and space-based remote sensing, deformation and surface change associated with submarine volcanism can be investigated with pressure sensors and bathymetric measurements—the below-water remote sensing analogs of GNSS and InSAR, respectively.

Book chapter↗

Compilation of a nationwide river image dataset for identifying river channels and river rapids via deep learning

Remote sensing enables large-scale, image-based assessments of river dynamics, offering new opportunities for hydrological monitoring. We present a publicly available dataset consisting of 281,024 satellite and aerial images of U.S. rivers, constructed using an Application Programming Interface (API) and the U.S. Geological Survey’s National Hydrography Dataset. The dataset includes images, primary keys, and ancillary geospatial information. We use a manually labeled subset of the images to train models for detecting rapids, defined as areas where high velocity and turbulence lead to a wavy, rough, or even broken water surface visible in the imagery. To demonstrate the utility of this dataset, we develop an image segmentation model to identify rivers within images. This model achieved a mean test intersection-over-union ( 𝐼 𝑜 𝑈 ) of 0.57, with performance rising to an actual 𝐼 𝑜 𝑈 of 0.89 on the subset of predictions with high confidence (predicted 𝐼 𝑜 𝑈 > 0.9). Following this initial segmentation of river channels within the images, we trained several convolutional neural network (CNN) architectures to classify the presence or absence of rapids. Our selected model reached an accuracy and F1 score of 0.93, indicating strong performance for the classification of rapids that could support consistent, efficient inventory and monitoring of rapids. These data provide new resources for recreation planning, habitat assessment, and discharge estimation. Overall, the dataset and tools offer a foundation for scalable, automated identification of geomorphic features to support riverine science and resource management.

Remote Sensing↗

Land surface phenology

Certain vegetation types (e.g., deciduous shrubs, deciduous trees, grasslands) have distinct life cycles marked by the growth and senescence of leaves and periods of enhanced photosynthetic activity. Where these types exist, recurring changes in foliage alter the reflectance of electromagnetic radiation from the land surface, which can be measured using remote sensors. The timing of these recurring changes in reflectance is called land surface phenology (LSP). During recent decades, a variety of methods have been used to derive LSP metrics from time series of reflectance measurements acquired by satellite-borne sensors. In contrast to conventional phenology observations, LSP metrics represent the timing of reflectance changes that are driven by the aggregate activity of vegetation within the areal unit measured by the satellite sensor and do not directly provide information about the phenology of individual plants, species, or their phenophases. Despite the generalized nature of satellite sensor-derived measurements, they have proven useful for studying changes in LSP associated with various phenomena. This chapter provides a detailed overview of the use of satellite remote sensing to monitor LSP. First, the theoretical basis for the application of satellite remote sensing to the study of vegetation phenology is presented. After establishing a theoretical foundation for LSP, methods of deriving and validating LSP metrics are discussed. This chapter concludes with a discussion of major research findings and current and future research directions.

Book chapter↗