Report of the first national Conference on Minority Participation in Earth Science and Mineral Engineering
No abstract available.
Conference Paper↗
SEARCH · USGS Science
Results for “Mining Engineering”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Possible reestablishment of sawtimber production following mining in the Osceola National Forest, an analysis of the state-of-the-art, February 9, 1978
There is a good possibility that sawtimber production could be reestablished on the Osceola National Forest. Engineering technology that is coming on-line should allow the establishment of land/water relationships that meet the requirements of desired tree species. Information available on soil-plant relationships indicate an absence of phytotoxic materials in various mining wastes and that good tree growth is possible.
Florida↗
Snow-depth and water-equivalent data for the Fairbanks area, Alaska, spring 1995
Snow depths at 34 sites and snow-water equivalents at 13 sites in the Fairbanks area were monitored during the 1995 snowmelt period (March 30 to April 26) in the spring of 1995. The U.S. Geological Survey conducted this study in cooperation with the Fairbanks International Airport, the University of Alaska Fairbanks, the Alaska Department of Natural Resources-Division of Mining and Water Management, the U.S Army, Alaska, and the U.S. Army Corps of Engineers-Alaska District. These data were collected to provide information about potential recharge of the ground-and surface-water systems during the snowmelt period in the Fairbanks area. This information is needed by companion geohydrologic studies of areas with known or suspected contaminants in the subsurface. Data-collection sites selected had open, boggy, wooded, or brushy vegetation cover and had different slope aspects. The deepest snow at any site, 27.1 inches, was recorded on April 1, 1995; the shallowest snow measured that day was 19.1 inches. The snow-water equivalents at these two sites were 5.9 inches and 4.5 inches, respectively. Snow depths and water equivalents were comparatively greater at open and bog sites than at wooded or brushy sites. Snow depths and water equivalents at all sites decreased throughout the measuring period. The decrease was more rapid at open and boggy sites than at wooded and brushy sites. Snow had completely disappeared from all sites by April 26, 1995.
Open-File Report↗
Mineral resource of the month: feldspar
The article focuses on feldspar, a mineral that composes of potassium, sodium, or a fusion of the two, and its various applications. According to estimates by scientists, the mineral is present at 60 percent of the crust of Earth, wherein it is commonly used for making glass and ceramics. Global mining of feldspar was about 20 million metric tons in 2010, wherein Italy, Turkey, and China mine 55 percent of the feldspar worldwide.
Earth↗
One hundred years of cobalt production in the Democratic Republic of the Congo
Cobalt is an indispensable element for the manufacture of strategic technologies including advanced batteries, jet engines, rare-earth permanent magnets, petroleum catalysts, and tool parts that enable construction, manufacturing, and mining. Cobalt routinely scores high in mineral supply risk assessments due to the concentration of cobalt mine production in the Democratic Republic of the Congo (DRC). This stands in contrast to the fact that DRC cobalt mine production had a 20% compound annual growth rate from 1995 through 2020—in large part due to investments by Chinese firms beginning in the mid-2000s. Given this continuous growth, one may ask why this supply is perceived to be so risky. This analysis illuminates the causes of historic disruptions to DRC cobalt mine and refinery production by analyzing country-level production, historical reports, and cobalt prices back to 1924. The results indicate that the main causes of supply disruptions were damage to transportation routes, underinvestment in maintaining nationalized mining assets, and the disintegration of the DRC economy during the early 1990s. On the other hand, cobalt mine production increased 50% from 1977 to 1979 despite two secessionist conflicts in DRC's cobalt producing region and increased seven-fold from 1996 to 2003 despite two African wars over the DRC and its resources. These results indicate that—barring another economic disintegration or mining industry nationalization—DRC mine production will likely continue to be the dominant supplier of the world's growing demand for cobalt in lithium-ion batteries. These results also indicate that sustained development of transportation (and other) infrastructure in Africa, as well as support for good governance in the DRC may prove key to the continued stability of DRC cobalt mine supplies.
Resources Policy↗
UCODE, a computer code for universal inverse modeling
This article presents the US Geological Survey computer program UCODE, which was developed in collaboration with the US Army Corps of Engineers Waterways Experiment Station and the International Ground Water Modeling Center of the Colorado School of Mines. UCODE performs inverse modeling, posed as a parameter-estimation problem, using nonlinear regression. Any application model or set of models can be used; the only requirement is that they have numerical (ASCII or text only) input and output files and that the numbers in these files have sufficient significant digits. Application models can include preprocessors and postprocessors as well as models related to the processes of interest (physical, chemical and so on), making UCODE extremely powerful for model calibration. Estimated parameters can be defined flexibly with user-specified functions. Observations to be matched in the regression can be any quantity for which a simulated equivalent value can be produced, thus simulated equivalent values are calculated using values that appear in the application model output files and can be manipulated with additive and multiplicative functions, if necessary. Prior, or direct, information on estimated parameters also can be included in the regression. The nonlinear regression problem is solved by minimizing a weighted least-squares objective function with respect to the parameter values using a modified Gauss-Newton method. Sensitivities needed for the method are calculated approximately by forward or central differences and problems and solutions related to this approximation are discussed. Statistics are calculated and printed for use in (1) diagnosing inadequate data or identifying parameters that probably cannot be estimated with the available data, (2) evaluating estimated parameter values, (3) evaluating the model representation of the actual processes and (4) quantifying the uncertainty of model simulated values. UCODE is intended for use on any computer operating system: it consists of algorithms programmed in perl, a freeware language designed for text manipulation and Fortran90, which efficiently performs numerical calculations.
Computers & Geosciences↗
Interagency partnership to assess and restore a degraded urban riverine wetland: Dyke Marsh Wildlife Preserve, Virginia
The narrow-leaved cattail wetland known as Dyke Marsh formally became a land holding of George Washington Memorial Parkway (GWMP, a unit of the national park system) in 1959, along with a congressional directive to honor a newly-let 30-year commercial sand and gravel dredge-mining lease at the site. Dredging continued until 1974 when Public Law 93-251 called for the National Park Service and the United States Army Corps of Engineers to “implement restoration of the historical and ecological values of Dyke Marsh.” By that time, about 83 acres of the marsh remained, and no congressional funding accompanied the passage of the law to effect any immediate conservation or restoration. Decades of dredge mining had severely altered the surface area of Dyke Marsh, the extent of its tidal creek system, and the shallow river bottom of the Potomac River abutting the marsh. Further, mining destabilized the marsh, causing persistent erosion, shoreline retreat, and tidal channel widening after mining ceased. Erosion has continued unchecked until the present; approximately 50 acres of the original marsh are now estimated to remain. The specific cause of persistent erosion had been unknown prior to this collaborative study but previously was assumed to be due to flooding by the Potomac River.
Virginia↗
Drill-hole location maps, Carlsbad mining district, Eddy and Lea Counties, New Mexico
No abstract available.
New Mexico↗
Identifying geomorphic process domains in the synthetic landscapes of West Virginia, USA
Human activities such as mining, agriculture, and urbanization have resulted in severe, large‐scale alteration to landform organization and associated geomorphic processes. The mountaintop mining (MTM) region of West Virginia, USA has experienced dramatic topographic alteration, by removing steep slopes and introducing plateau‐like areas at ridgelines and benches on valley fills. The resulting engineered landforms create synthetic landscapes, disconnected from previous geomorphic processes. Invoking the process domain concept, we compare differences in slope‐area relations, cumulative area distributions (CADs), elevation, slope, upslope accumulated area, and a slope*area product before and after mining to adjacent unmined sub‐catchments in five study basins. Differences in the slope‐area relation include a 42% slope reduction in low drainage areas, corresponding to hillslopes, unchanneled valleys, and debris flow dominated channels, which may fall below thresholds required for debris flow processes. The curved slope‐area relation that represents valley incision by debris flows is replaced by slope‐area relations that resemble basins where gullying and the stream power law dominate. Extremely high chemical weathering of unconsolidated valley fills materials may facilitate process domain shifts from debris flows to gullying and fluvial erosion. The characteristic power law scaling break in CADs that represents the headward limit of the channelized network is subdued in post‐mined sites and may reflect headward channelized network extension in mined basins. Slope‐area relations and CADs present a unique topographic signature of MTM activity, potentially providing an analytical approach to assess impacts on underlying geomorphic processes for other synthetic landscapes such as cities or large‐scale agricultural production.
West Virginia↗
Site characterization techniques
Geoelectrical methods have been used since the 1920's to search for metallic ore deposits. During the last decade, traditional mining geophysical techniques have been adapted for environmental site characterization. Geoelectrical geophysics is now a well developed engineering specialty, with different methods to focus both on a range of targets and on depths below the surface. Most methods have also been adapted to borehole measurements.
Fact Sheet↗
Geostatistical modeling of the gas emission zone and its in-place gas content for Pittsburgh-seam mines using sequential Gaussian simulation
Determination of the size of the gas emission zone, the locations of gas sources within, and especially the amount of gas retained in those zones is one of the most important steps for designing a successful methane control strategy and an efficient ventilation system in longwall coal mining. The formation of the gas emission zone and the potential amount of gas-in-place (GIP) that might be available for migration into a mine are factors of local geology and rock properties that usually show spatial variability in continuity and may also show geometric anisotropy . Geostatistical methods are used here for modeling and prediction of gas amounts and for assessing their associated uncertainty in gas emission zones of longwall mines for methane control. This study used core data obtained from 276 vertical exploration boreholes drilled from the surface to the bottom of the Pittsburgh coal seam in a mining district in the Northern Appalachian basin. After identifying important coal and non-coal layers for the gas emission zone, univariate statistical and semivariogram analyses were conducted for data from different formations to define the distribution and continuity of various attributes. Sequential simulations performed stochastic assessment of these attributes, such as gas content, strata thickness, and strata displacement. These analyses were followed by calculations of gas-in-place and their uncertainties in the Pittsburgh seam caved zone and fractured zone of longwall mines in this mining district. Grid blanking was used to isolate the volume over the actual panels from the entire modeled district and to calculate gas amounts that were directly related to the emissions in longwall mines. Results indicated that gas-in-place in the Pittsburgh seam, in the caved zone and in the fractured zone, as well as displacements in major rock units, showed spatial correlations that could be modeled and estimated using geostatistical methods. This study showed that GIP volumes may change up to 3 MMscf per acre and, in a multi-panel district, may total 9 Bcf of methane within the gas emission zone. Therefore, ventilation and gas capture systems should be designed accordingly. In addition, rock displacements within the gas emission zone are spatially distributed. From an engineering and practical point of view, spatial distributions of GIP and distributions of rock displacements should be correlated with in-mine emissions and gob gas venthole productions.
International Journal of Coal Geology↗
West Virginia Geological Survey's role in siting fluidized bed combustion facilities
A project is presented which demonstrates the role of geology in planning and siting a fluidized bed combustion facility. Whenever a project includes natural resource utilization, cooperation between geologists and design engineers will provide an input that could and should save costs, similar to the one stated in our initial premise. Regardless of whether cost reductions stem from a better knowledge of fuel and sorbent availabilities, or a better understanding of the local hydrology, susceptibility to mine-subsidence, or other geologic hazards, the geological survey has a vital role in planning. Input to planning could help the fluidized-bed developer and design-engineer solve some economic questions and stretch the financial resources at their disposal.
Conference Paper↗
Fungal biology and agriculture: revisiting the field
Plant pathology has made significant progress over the years, a process that involved overcoming a variety of conceptual and technological hurdles. Descriptive mycology and the advent of chemical plant-disease management have been followed by biochemical and physiological studies of fungi and their hosts. The later establishment of biochemical genetics along with the introduction of DNA-mediated transformation have set the stage for dissection of gene function and advances in our understanding of fungal cell biology and plant-fungus interactions. Currently, with the advent of high-throughput technologies, we have the capacity to acquire vast data sets that have direct relevance to the numerous subdisciplines within fungal biology and pathology. These data provide unique opportunities for basic research and for engineering solutions to important agricultural problems. However, we also are faced with the challenge of data organization and mining to analyze the relationships between fungal and plant genomes and to elucidate the physiological function of pertinent DNA sequences. We present our perspective of fungal biology and agriculture, including administrative and political challenges to plant protection research.
Molecular Plant-Microbe Interactions↗
Catalog of selected offices of the Office of Surface Mining, Bureau of Land Management, and Geological Survey relating to coal, 1981
Explore the source record for details and available documents.
Circular↗
Map showing mined areas of the Boulder-Weld coal field, Colorado
Compiled by Raymond E. Lowrie, U.S. Bureau of Mines (1966), and revised by Roger B. Colton, U.S. Geological Survey, assisted by Harold R. Fitch, 1972. In the revision of this map, many mine maps and two unpublished general small-scale maps of the area by F. H. Canis (deceased) and Samuel Tescher (deceased) were used. Much information was obtained orally from Louis A. Gaz, Consulting Engineer, Lafayette, Colorado. Faults shown are from published and unpublished geologic maps of the Erie, Frederick, Lafayette, and Louisville quadrangles by Frank D. Spencer (1961), U.S. Geological Survey; from field work by Colton, and from many large-scale unpublished mine maps loaned by Louis Gaz. Users of this map should consult copies of the large-scale mine maps in the Office of the Colorado State Coal Mine Inspection Group for exact outlines of mined-out areas. Areas affected by collapse over mined-out areas may be larger than limits of mine workings. Depth to mined coal increases generally from west to east and ranges from zero at the outcrop to as much as 500 feet. Boundaries of workings should be verified by drilling. Shafts and drifts are only approximately located, and some may not be shown.
Colorado↗
Preliminary field geotechnical and geophysical logs from a drill hole in the Capps coal field, Cook Inlet region, Alaska
The drilling and logging activity described in this report was undertaken in August 1979, as part of the Energy Lands program of the U.S. Geological Survey. The general objectives of the project, of which this work is a part, are to provide an understanding of the nature, location, and extent of the engineering and environmental concerns in potential coal-development areas of the Cook Inlet region, Alaska. The geotechnical and geophysical logs presented in this report provide some of the basic physical-property and engineering data needed to evaluate geologic hazards, and to predict the response of geologic materials to large-scale coal mining and related development in the Capps coal field of the Beluga coal area. Specifically, the information may be used to help determine such things as natural- and cut-slope stability, spoil-pile stability, ground response to seismic activity, blasting effects, excavatability, bulking characteristics, ground-water conditions, and erosion potential.
Alaska↗
Models, validation, and applied geochemistry: Issues in science, communication, and philosophy
Models have become so fashionable that many scientists and engineers cannot imagine working without them. The predominant use of computer codes to execute model calculations has blurred the distinction between code and model. The recent controversy regarding model validation has brought into question what we mean by a ‘model’ and by ‘validation.’ It has become apparent that the usual meaning of validation may be common in engineering practice and seems useful in legal practice but it is contrary to scientific practice and brings into question our understanding of science and how it can best be applied to such problems as hazardous waste characterization, remediation, and aqueous geochemistry in general. This review summarizes arguments against using the phrase model validation and examines efforts to validate models for high-level radioactive waste management and for permitting and monitoring open-pit mines. Part of the controversy comes from a misunderstanding of ‘prediction’ and the need to distinguish logical from temporal prediction. Another problem stems from the difference in the engineering approach contrasted with the scientific approach. The reductionist influence on the way we approach environmental investigations also limits our ability to model the interconnected nature of reality. Guidelines are proposed to improve our perceptions and proper utilization of models. Use of the word ‘validation’ is strongly discouraged when discussing model reliability.
Applied Geochemistry↗