USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing of Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 31Linked to original sources
USGS2025

Geologic models underpinning the 2024 U.S. Geological Survey assessment of undiscovered oil and gas resources in the Hosston and Travis Peak Formations of the onshore Gulf Coast region, U.S.A.

The Early Cretaceous (Berriasian–Hauterivian) Hosston Formation in Louisiana and eastward is time correlative to the Travis Peak Formation of Texas and southern Arkansas. The formation is a first-order clastic sequence with a regional carbonate transgressive surface as an upper contact. The Hosston and Travis Peak formations contain conventional natural gas and oil accumulations that have been produced for nearly a century. These mature reservoirs contain terrigenous fluvial-deltaic, shore-zone, and paralic deposits across the productive trend; organic-lean mudstone and siltstone lithologies are found outboard of the Lower Cretaceous shelf margin. Producing reservoirs exhibit normal pressure gradients from 0.43 to 0.55 psi/ft (9.7 to 12.4 kpa/m), depths from 4000 to over 20,000 ft (1220 to 6100 m), and temperatures from 150 to 385°F (65 to 196°C). Wells are primarily vertical completions. The number of new field wildcats has been declining since the late 1990s. This paper presents comprehensive geologic models, which include lithofacies maps, structure and isopach maps, burial history models, regional seismic interpretations, and events charts that underpin the recently completed U.S. Geological Survey assessment of undiscovered, technically recoverable hydrocarbons within the Hosston and Travis Peak formations. This study also provides geographic and stratigraphic distributions of Hosston–Travis Peak reservoir properties, including geopressure, reservoir temperature, porosity, permeability, API gravity, and gas-oil ratios. Results indicate estimated undiscovered, technically recoverable mean resources of 28 million barrels of oil and 35.8 trillion cubic ft of gas in conventional and continuous accumulations within the Lower Cretaceous Hosston and Travis Peak formations of the onshore U.S. Gulf Coast region. Quantitative assessment results are detailed in U.S. Geological Survey Fact Sheet 2025–3021 and associated Data Release.

GCAGS Journal↗
USGS1976

Guidelines for collection and field analysis of ground-water samples for selected unstable constituents

The unstable nature of many chemical and physical constituents in ground water requires special collection procedures and field analysis immediately after collection. This report describes the techniques and equipment commonly used in the collection and field analysis of samples for pH, temperature, carbonate, bicarbonate, specific conductance, Eh, and dissolved oxygen.

Open-File Report↗
USGS2024

Paleoseismology of the Sawtooth fault and implications for fault behavior in the epicentral region of the 2020 Mw 6.5 Stanley, Idaho, earthquake

The 2020 moment magnitude ( M w ⁠⁠ ) 6.5 Stanley, Idaho, earthquake raised questions about the history and extent of complex faulting in the northwestern Centennial Tectonic Belt (CTB) and its relation to the Sawtooth normal fault and Eocene Trans‐Challis fault system (TCFS). To explore faulting in this area, we excavated a paleoseismic trench across the Sawtooth fault along the western margin of the CTB, and compared an early Holocene (9.1 ± 2.1 ka, 1δ ⁠ ) rupture at the site with lacustrine paleoseismic data and fault mapping in the 2020 epicentral region. We find: (1) a history of partial to full rupture of the Sawtooth fault ( M w ⁠ 6.8–7.4), (2) that shorter ruptures ( M w ≤ ⁠⁠6.9 ) are likely along distributed and discontinuous faults in the epicentral region, (3) that this complex system that hosted the 2020 earthquake is not directly linked to the Sawtooth fault, (4) that the northeast‐trending TCFS likely plays a role in controlling fault length and rupture continuity for adjacent faults, and (5) that parts of the TCFS may facilitate displacement transfer between normal faults that accommodate crustal extension and rotation. Our results help unravel complex faulting in the CTB and imply that relict structures can help inform regional seismic hazard assessments.

Idaho↗
USGS1976

Transport and dispersion of fluorescent tracer particles for the dune-bed condition, Atrisco Feeder Canal near Bernalillo, New Mexico

A tracer technique in which mineral particles were coated with fluorescent dyes was used to study the rates of transport and dispersion of sediment particles`of various diameters and specific gravities for a dune-bed condition in an alluvial channel. The experiment was conducted in the Atrisco Feeder Canal near Bernalillo, N. Mex., between May 1 and July 14, 1967. A continuous point source of tracers, approximated by injections at 5- or 10-minute intervals, was maintained for 7 days so that the steady-dilution procedure could be used to calculate the transport rate of bed material. After termination of the injection process, the spatial-integration procedure was used to follow the movement of the tracers downstream and to calculate the transport rate. Samples of the bed material in transport and the accompanying tracers moving along the surface of the dune bed were obtained periodically throughout the study with the "dustpan" sampler especially designed for fluorescent tracer studies. In addition, the spatial distributions of the tracers in the dune bed were determined three times during the study by core sampling.

New Mexico↗
USGS2026

High-resolution magnetic survey using an unoccupied aerial vehicle to constrain buried lava flow geometry, volume, and eruptive history of Little Cones, Crater Flat, Nevada

Magnetic surveys are an important tool used to augment geologic mapping in distributed volcanic fields. Using magnetic anomalies, it is possible to model the geometry of shallowly buried volcanic features, such as conduits, sills, and lava flows. This subsurface mapping is important for understanding eruption dynamics and emplacement of lava flows, and it sometimes reveals buried volcanoes no longer visible at the surface. These data are critical to better interpret the numbers, styles, and magnitudes of eruptions in distributed volcanic fields and their associated volcanic hazards. New advances in unoccupied aerial vehicles (UAVs) offer an attractive middle range of resolution and aerial coverage between ground-based magnetic surveys and aeromagnetic surveys. Here, we present the results of a UAV fluxgate magnetic survey of the Little Cones, Nevada, scoria cones, which have been the target of previous ground and aeromagnetic surveys. The magnetic anomalies at Little Cones are of interest because the surrounding alluvium conceals lava flows that erupted from Little Cones, making it very difficult to understand the volume and morphology of lava flows from geologic mapping alone. Nonlinear inversion of UAV-collected magnetic data were used to model the thickness and morphology of buried Little Cones’ lava flows with higher precision than achieved previously. The sequence of events and calculated flow characteristics are then interpreted. The total volume of Little Cones, including concealed lava flows, is approximately 0.016 cubic kilometer, and the initial sheet flow erupted in less than 24 hours. The findings presented herein demonstrate that UAV-based magnetic surveys are a reliable method of data collection and an efficient alternative to other survey methods, facilitating development of a three-dimensional perspective of distributed volcanic fields.

Nevada↗
USGS2022

U-Pb scheelite ages of tungsten and antimony mineralization in the Stibnite-Yellow Pine district, central Idaho

The Stibnite-Yellow Pine district contains the largest antimony resource in the United States, as well as significant gold, and is a historic producer of tungsten. Application of in situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) direct dating of scheelite from two Au-Sb-W ore deposits, Yellow Pine and Hangar Flats, yielded an older group of U-Pb ages in the range of 60.0 ± 2.8 to 57.0 ± 1.1 Ma and a younger U-Pb age for scheelite intergrown with stibnite of 47.4 ± 1.1 Ma. These in situ analyses were calibrated by isotope dilution-thermal ionization mass spectrometry (ID-TIMS) U-Pb lower intercept ages of two coarsely crystalline scheelite samples that yielded ages of 57.52 ± 0.22 and 56.62 ± 0.16 Ma. Scheelite of the latter age is of sufficient quality to serve as a primary reference material for LA-ICP-MS scheelite U-Pb geochronology. The group of older U-Pb scheelite ages agrees with 40 Ar/ 39 Ar ages of 56.9 ± 1.2 to 56.38 ± 0.54 Ma on adularia from Yellow Pine and Hangar Flats, whereas the younger U-Pb scheelite age is similar to an 40 Ar/ 39 Ar age of 46.00 ± 0.40 Ma on adularia from an epithermal gold-silver deposit in the adjacent Thunder Mountain caldera. Our results indicate that the main stage of tungsten mineralization occurred at ca. 57 Ma, whereas the main stage of antimony mineralization occurred at ca. 47 Ma—thereby providing first-time age constraints for antimony and tungsten mineralization in the Stibnite-Yellow Pine district.

Idaho↗
USGS1983

Technique for estimating depth of floods in Tennessee

Estimates of flood depths are needed for design of roadways across flood plains and for other types of construction along streams. Equations for estimating flood depths in Tennessee were derived using data for 150 gaging stations. The equations are based on drainage basin size and can be used to estimate depths of the 10-year and 100-year floods for four hydrologic areas. A method also was developed for estimating depth of floods having recurrence intervals between 10 and 100 years. Standard errors range from 22 to 30 percent for the 10-year depth equations and from 23 to 30 percent for the 100-year depth equations.

Tennessee↗
USGS2025

The effects of line simplification on planform geometry

Data on maps should retain accuracy regardless of scale. Yet, as cartographic lines are generalized, there can be impacts on properties such as topology, density, and planform geometry. Here, we investigate the use of the Scale Specific Sinuosity (S3) metric (Stanislawski et al., 2023) to evaluate the effects of line simplification on planform geometry, which is the bends of streams in map view. We employ an open-source Python S3 workflow to characterize the geometry of five diverse stream channels in the United States. The original data are extracted from the U.S. Geological Survey National Hydrography Dataset 1:24,000-scale vector data (U.S. Geological Survey, 2000) (Table 1), and the simplification is done using the Visvalingam and Whyatt method (2017) with a simplification tolerance of 0.5, 1.0, 1.5, and 2.0 km. The S3 analysis is calculated at each level of simplification and S3 derivatives are generated. Derivatives include measures of sinuosity, fractal dimension, and the dominant bend wavelength. The findings show that the change in planform geometry is scale-dependent, though simplification will have little effect on straighter lines. The change becomes more apparent in complex lines as the degree of simplification aligns with the scale of the dominant bend geometries. These logical conclusions are evidence that the S3 is a useful metric for automated characterization of bend geometry regardless of line complexity.

Conference Paper↗
USGS2025

Gravity and magnetic surveys of the Skaergaard intrusion, East Greenland

Aeromagnetic and gravity surveys of the Skaergaard intrusion in East Greenland were carried out in July–August 1971 as part of a grant to the University of Oregon Center for Volcanology to refine the models of crystallization and differentiation of the intrusion, specifically to test whether the intrusion is underlain by dense rocks of a reservoir 20 kilometers (km) thick (referred to as a “hidden zone”). The Skaergaard intrusion is a source of platinum group elements that are critical mineral resources for many technologies, and because no new data have been collected these legacy datasets remain a valuable asset. The total-intensity aeromagnetic survey was flown in early July 1971 with a proton precession magnetometer at a constant barometric altitude of 1.5 km (5,000 feet) with a nominal line spacing of 1 km. Two gravimeters were used to acquire 168 stations of which 86 were at known altitudes (mainly sea level) and 82 had altitudes measured by altimetry in late July–August 1971. Finally, a north-south ground vertical-intensity magnetic traverse was completed across the intrusion together with collection of oriented hand specimens. The hand specimens were measured for remnant magnetization and density, along with density measurements of more specimens collected by expedition geologists for other purposes. The intrusion is composed of layered gabbro with extensive crystal fractionation that is dense and strongly reversely polarized. After terrain correction and standard Bouguer gravity reduction, the gravity anomaly dataset was corrected for all rock above sea level using the density measurements of the various zones of the intrusion and the topographic and geologic maps (variable density Bouguer gravity reduction). A large regional gradient in the gravity anomaly data was removed using orthogonal polynomial fitting to the gridded data. The zonal volumes of rock below sea level were calculated from the dipping polygonal layer gravity model of the intrusion below sea level and combined with elliptic cross–section cylinders for the various zones above sea level to approximate the original zonal volumes of the intrusion. The residual gravity anomaly of 18–20 milligals (mGal) was only about half of the expected anomaly if a large hidden zone proposed from petrologic considerations were present, and both two-dimensional and three-dimensional models imply that the exposed series of intrusion zones explain the gravity anomaly by their down-dip extension below sea level together with a small hidden-zone volume. A three-dimensional model of the exposed rocks and their down-dip extension below sea level also can account for the aeromagnetic anomaly with little or no requirement for hidden-zone rock. The middle and upper zone units of the intrusion contain the most magnetite and account for most of the aeromagnetic anomaly.

Skaergaard intrusion↗
USGS2025

Apatite geo-thermochronology and geochemistry constrain Oligocene-Miocene growth and geodynamics of the northeastern Tibetan Plateau

Understanding the geodynamics of plateau evolution requires examining the spatial and temporal aspects of mountain building in the northeastern Tibetan Plateau, which are still under debate. Here we integrate apatite geo-thermochronological and geochemical data from the Oligocene-Miocene succession of the Xunhua Basin to elucidate the evolution of the regional topography. The results suggest sediment provenance changes, at ca. 28, 20 and 12 Ma, indicating topographic growth of the West Qinling, Laji Shan, and Jishi Shan source areas, respectively. Our findings reveal Oligocene-Miocene stepwise deformation and middle Miocene stress reorganization within the northeastern Tibetan Plateau. We attribute this to Oligocene lithospheric foundering beneath the south-central Tibetan Plateau and the middle Miocene initiation of sinistral strike-slip faults due to the underthrusting of India and North China. This study highlights the roles of lithospheric removal and continental underthrusting in plateau growth, and the value of multi-proxy apatite analyses in provenance studies.

Northeastern Tibetan Plateau↗
USGS2024

Deep structure of Siletzia in the Puget Lowland: Imaging an obducted plateau and accretionary thrust belt with potential fields

Detailed understanding of crustal components and tectonic history of forearcs is important due to their geological complexity and high seismic hazard. The principal component of the Cascadia forearc is Siletzia, a composite basaltic terrane of oceanic origin. Much is known about the lithology and age of the province. However, glacial sediments blanketing the Puget Lowland obscure its lateral extent and internal structure, hindering our ability to fully understand its tectonic history and its influence on modern deformation. In this study, we apply map-view interpretation and two-dimensional modeling of aeromagnetic and gravity data to the magnetically stratified Siletzia terrane revealing its internal structure and characterizing its eastern boundary. These analyses suggest the contact between Siletzia (Crescent Formation) and the Eocene accretionary prism trends northward under Lake Washington. North of Seattle, this boundary dips east where it crosses the Kingston arch, whereas south of Seattle the contact dips west where it crosses the Seattle uplift (SU). This westward dip is opposite the dip of the Eocene subduction interface, implying obduction of Siletzia upper crust at this southern location. Elongate pairs of high and low magnetic anomalies over the SU suggest imbrication of steeply-dipping, deeply rooted slices of Crescent Formation within Siletzia. We hypothesize these features result from duplication of Crescent Formation in an accretionary fold-thrust belt during the Eocene. The active Seattle fault divides this Eocene fold-thrust belt into two zones with different structural trends and opposite frontal ramp dips, suggesting the Seattle fault may have originated as a tear fault during accretion.

Washington↗
USGS2025

Geochemistry and thermometry of magnetite veins and replacements in iron ore deposits from the Iron Springs district, SW Utah, USA: Relation to magmatic and hydrothermal processes

Ore-genesis, texture, chemical compositions, and thermometry of magnetite were used to better evaluate the origins of iron ore deposits across the Iron Spring district, Utah. Trace element compositions, determined by LA-ICP-MS, were used to calculate temperatures based on X Mg numbers and characterize the trace element signatures of magmatic and hydrothermal magnetite. Magnetite occurs as coarser crystalline grains within veins, breccias, and cavities along with finer crystalline replacements. Magnetite is most commonly intergrown with apatite, phlogopite, and carbonate in veins, breccias, and cavities where apatite occurs separately from the other gangue minerals. The results using empirical trace element discrimination diagrams generally suggest that the magnetite is overall of hydrothermal origin regardless of textural variations or field relationships. The X Mg numbers of the magnetite in the magnetite-apatite ores, however, are suggestive of high temperature magmatic conditions; whereas those of vein, breccia, and replacement occurrences containing other gangue minerals are suggestive of lower temperature hydrothermal processes.

Utah↗
USGS2025

Update of the 2008 provisional Enhanced Geothermal Systems (EGS) assessment for the Great Basin, USA

In response to the Energy Act of 2020, the U.S. Geological Survey (USGS) is updating the Enhanced Geothermal Systems (EGS) resource assessment for the Great Basin, USA. The previous 2008 provisional assessment estimated how much electricity could be generated from EGS resources of the western United States using models of electric-grade heat, models of heat extraction over time, and estimates of how much rock might be stimulated to produce viable amounts of heat. Herein, a similar conceptual strategy is applied, using updated models of heat extraction as a function of fracture spacing and well distance. Previously used reservoir heat delivery models are updated to have a dependence on fracture and well spacing, potentially improving future estimates of EGS resources as ongoing research provides a better understanding about the success of reservoir stimulation as a function of geology and location. For a range of well distances (250-1000 m) and fracture spacings (1-50 m), heat extraction efficiency ranges from 25-62%, demonstrating the importance of accounting for the most likely results of proven viable fracturing technologies. Although fracturing is important, the biggest uncertainty by far in estimating the EGS resource for the Great Basin is estimating which geologic units at what depths can be stimulated sufficiently to produce geothermal energy economically and efficiently. Uncertainties in these factors yield estimates that range over two orders of magnitude with an upper limit of ~174 terawatts-thermal (TWth) produced for 30 years from the upper 7 km of the crust. This upper limit would require significant technological advances to access most of the electric-grade resource across the Great Basin. Assuming that 1% of this estimate will be accessible in the next few decades gives a resource estimate similar to that made in the 2008 provisional assessment. These estimated EGS heat extraction rates far exceed ( greater than 100x) the natural geothermal heat production rate, thus geothermal electricity production at these rates might not be sustainable unless heat is also recharged from other sources (e.g., excess solar energy when supply exceeds demand). In addition to assessment maps and cumulative estimates, the new models of fractured reservoirs developed herein can be used to estimate steady power production given a set of fractures and well spacing, and estimates can be made for setback distances to ensure no thermal interference with nearby powerplants.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2025

Comparative properties of saponitic fault gouge and serpentinite muds cored from mud volcanoes of the Mariana subduction zone

We obtained 12 core samples for physical and chemical characterization from three serpentinite mud volcanoes (Yinazao, Asùt Tesoru, and Fantangisña) located on the forearc of the Mariana subduction system, that were drilled during International Ocean Discovery Program Expedition 366. Two samples from the Fantangisña mud volcano are interpreted to be clay-rich fault gouges derived from the subduction channel. Their bulk compositions are intermediate between the serpentinites and oceanic basalts. The oceanic crustal materials in the gouges have been thoroughly metasomatized and the serpentinites extensively altered to the trioctahedral, Mg-rich smectite clays saponite and corrensite. The only relict phases in clasts of crustal rock are accessory Ti- and P-bearing minerals. The two fault gouge samples have lower frictional strengths ( μ < 0.2) than the serpentinites ( μ = 0.2–0.4), and their measured permeabilities are also somewhat lower. Their physical and compositional properties correspond to saponitic gouges from other faults that juxtapose serpentinite against crustal rocks, in particular gouges from the two creeping traces of the San Andreas Fault recovered in the core from the San Andreas Fault Observatory at Depth. The décollement beneath Fantangisña mud volcano is thus expected to be very weak and likely characterized by stable slip.

Geophysics, Geochemistry, Geosystems↗
USGS2025

Geochemical evidence for the origin of late Quaternary loess, Seward Peninsula, Alaska

Loess is the most widespread surficial deposit in the state of Alaska. Although loess of last glacial age is common in mid-continental North America, records of last glacial loess in Alaska have been elusive. Here we report a record of last glacial loess on the Seward Peninsula, along with studies of a transect of loess localities also thought to date to the last glacial period. Highly diverse hypotheses on the origin of loess on the Seward Peninsula include local volcanic rocks and mountain ranges to the north and south, as well as offshore deposits. We present particle size and mineralogical and geochemical data that indicate that the most likely sources for loess in this part of eastern Beringia are glaciogenic silt particles of the Kobuk River and Noatak River, both of which drain the Brooks Range to the northeast. Northeasterly paleowinds were therefore responsible for loess on the Seward Peninsula. Such winds probably occurred during late summer or early autumn, when river discharge was at a minimum but temperatures were still above freezing. Northeasterly winds during the last glacial period are in good agreement with a recent paleoclimate model.

Alaska↗
USGS2026

Decadal-scale characteristics of natural and anthropogenic dune morphology along North Carolina Barrier Islands (SE Atlantic Coast)

Dunes offer protection to coastal communities from storms, yet quantitative research characterizing human influences on dune systems across decades and 10–100 km spatial scales constitutes a known data gap. This study analyzed a multidecadal archive of dune crest elevations and positions to map mesoscale spatiotemporal trends in foredune morphology across the barrier island coastline of North Carolina, SE Atlantic coast. Results are summarized within four categories of coastline representing a range of coastal management intensities, integrating beach width and dune lateral accommodation space to assess the comparative influence of differing intensities of anthropogenic intervention on dune morphology. These categories account for the presence of structures, roads, and alongshore connectivity to anthropogenic sediment sources (beach nourishment). These categories show distinct dune and beach system characteristics. Dunes are largest in the areas with the longest legacy of coastal management. As categories decrease in development intensity, dune and beach system characteristics generally depart from the large, static dunes and narrow beaches consistent with hold-the-line management. Where small or transgressive dunes exist on heavily developed coasts, they coincide with relatively strong hydrodynamic forcing or sediment-limiting geology. There is evidence of indirect coastal management influence on undeveloped barrier islands with alongshore connectivity to developed barriers. While this analysis was conducted at the mesoscale, the results provide researchers with the framework to make insights at smaller scales than those demonstrated in this study.

North Carolina↗