USGS Science⌕ Search

SEARCH · USGS Science

Results for “Proceedings of the National Academy of Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,688 records · Page 30Linked to original sources
USGS2024

Summary of annual repeat magnetotelluric surveys of the Geysers geothermal field

As part of a multi-year project, funded by the California Energy Commission, annual magnetotelluric (MT) surveys have been collected at The Geysers geothermal field in northern California with the goal of measuring temporal changes within the steam field. The repeat surveys started in 2021 and repeated a 2017 survey (Peacock et al., 2020) with further extension to the southern part of the geothermal field. Temporal variations in the MT transfer functions are observed to be spatially coherent and compartmentalized. Mapping residual phase tensor ellipses demonstrates the direction of maximum change is often aligned with existing fracture orientations. Three dimensional inversion of the MT data, using the inversion results from previous years as the starting model, indicates that the steam reservoir has generally become more resistive over time (~10%), suggesting more steam in the field. A few pockets within the steam field have become more electrically conductive over time and are collocated with injection wells, suggesting either more fluid content in those zones, less steam, or more saline fluids.

California↗
USGS2024

Slip rate for the Rose Canyon fault through San Diego, California, based on analysis of GPS data: Evidence for a potential Rose Canyon–San Miguel-Vallecitos fault connection?

The Rose Canyon fault is the southern extension of the larger Newport–Inglewood–Rose Canyon fault system, which represents a major structural boundary in the Inner Continental Borderland (ICB) offshore of southern California. Ten to fifteen percent of total plate boundary motion in southern California is thought to be accommodated by the faults of the ICB, but the exact distribution of slip is uncertain. With an onshore segment, the Rose Canyon fault offers an opportunity to measure the slip rate using traditional geodetic methods. In this study, we use Global Positioning System (GPS) surface velocities from a combined campaign and continuous GPS network to constrain elastic models of the Rose Canyon fault. We then compare the observed surface velocities with proposed conceptual models of regional fault connections that facilitate the transfer of slip into the Rose Canyon fault to assess how well the observations are explained by the models. The results of elastic half‐space models suggest that the Rose Canyon fault may be slipping toward the higher end of geologic estimates, with the preferred model indicating a slip rate of 2.4 ± 0.5 mm/yr. Although limited in terms of near‐fault benchmarks, we find an improved model fit using an asymmetrical elastic half‐space model and a higher slip rate, suggesting a potential rheological contrast across the Rose Canyon fault, similar to observations from the northern Newport–Inglewood fault segments. Observed GPS surface velocities, background seismicity, and gravity anomalies south of San Diego Bay point toward a more easterly trace for the Rose Canyon fault, suggesting a possible connection with the San Miguel–Vallecitos fault system. Such a connection could increase the potential rupture lengths of future earthquakes and have important consequences for regional seismic hazards.

California↗
USGS2026

Syn-magmatic subsidence during the early stages of continental rifting in the Mesoproterozoic—A reanalysis of legacy data for the Midcontinent Rift, western Lake Superior

The Midcontinent Rift system (ca. 1.1 Ga) is a 2000-km-long series of elongated volcanic and sedimentary troughs and associated intrusive centers exposed chiefly in the Lake Superior region of North America. The rift system represents a long history of intense magmatism and subsequent sedimentation that was arrested by far-field tectonic events before sea-floor spreading was established. The premature cessation preserved a record of processes related to the beginning of continental rifting. The rift system under Lake Superior has been long studied using seismic-reflection data collected as part of the Great Lakes International Multidisciplinary Program on Crustal Evolution (GLIMPCE). We reexamine GLIMPCE Line C by developing a detailed velocity model for time to depth conversion constrained by other legacy data. We corroborate the model and develop a geologic interpretation using gravity and magnetic modeling and ties to geology mapped onshore. We recognize superposed subsiding sedimentary and volcanic basins for the southern half of the Line C depth section. This interpretation differs from previous paradigms that show major crustal faults that bound half-grabens or full grabens. We conclude that high-velocity (6.9 km/s) intrusive zones rather than major crustal faults border the sides of the basins. We speculate that the volcanic basin represents the initiation of seaward dipping reflectors. The syn-magmatic subsidence can be explained by dike injection and volcanic loading. Discrete lava basins throughout the region likely subsided at different times in a disorganized manner along the rift trend, raising questions about the long-term role of lithospheric thinning and melt generation.

Michigan, Minnesota, Ontario, Wisconsin↗
USGS1973

Geohydrology of the Cross-Florida Barge Canal area, with special reference to the Ocala vicinity

The Cross-Florida Barge Canal route commences at Palatka on the St. Johns River, about 75 miles upstream from the Atlantic Ocean, and extends 110 miles southwestward across Peninsular Florida into deep water in the Gulf of Mexico near Yankeetown. The canal will be equipped with five locks, each 600 feet long and 84 feet wide, and the channel will be a minimum of 12 feet deep and 150 feet wide. From near Ocala northeastward, the canal channel will replace much of the natural channel of the Oklawaha River, and will be excavated into beds of the so-called shallow sand aquifer of Miocene age and younger, which overlies limestone of the Floridan aquifer. Westward from Ocala, most of the canal will be excavated below the potentiometric surface into limestone and dolomite of the Floridan aquifer. Water levels of Rodman, Eureka, and Inglis Pools will be controlled by dams and spillways with the limited exchange of water between the pools and the aquifers. The water levels in the Summit Pools will fluctuate with the natural changes in the ground-water level of the Floridan aquifer, although the stage of the pool will be controlled partly by the stage held in the Eureka Pool. A dynamic inflow-outflow relationship will exist between the Summit Pool and the Floridan aquifer. The Floridan aquifer in the canal area is 1,000 to 1,200 feet thick and consists of limestone and dolomite of middle Eocene Miocene age, including from older to younger, the Lake City, Avon Park, and Ocala limestones plus permeable sandy, dolomitic limestone in the lower part of the Hawthorn Formation. It is possible that most of the flow to the two major springs in the area occurs in the upper 100 feet or so of the aquifer in the Ocala Limestone. The aquifer is underlain by the Oldsmar limestone of early Eocene age and is overlain by sand, clayey sand, clay and shell beds of Miocene through Holocene age, in thickness from a few feet to 300 feet. The permeable beds overlying the Floridan aquifer constitute the shallow aquifer, while the poorly permeable ones act as confining beds where the Floridan aquifer is under artesian conditions. A north-south line drawn separating the head of Silver Springs on the west from the Oklawaha River on the east marks the approximate western limit of a continuous blanket of materials of Miocene-Pliocene(?) age covering the rocks of the Floridan aquifer. East of the line, much of the aquifer is under artesian conditions, particularly in the Oklawaha River valley, although in some areas east of the valley, direct recharge through thick permeable Miocene-Pliocene(?) sands occurs. West of the line, only scattered remnants of a once continuous Miocene-Pliocene(?) cover remain. Lack of the cover is a result of erosion on the crest and flank of the Ocala Uplift, a broad northwest-southeast trending anticlinal upwarp, the axis of which is crossed by the canal route in the Dunnellon area. Over most of this area the Floridan aquifer is unconfined and receives direct recharge through a cover of a few tens of feet of sand and clayey sand of Quaternary age. Tensional stresses during the structural evolution of the Ocala Uplift produced an intersecting system of fractures and normal faults in rocks of the Floridan aquifer. The fractures and faults are important controls for orientation of solution channels and, therefore, for development of ground-water circulation patterns. When the system surface streams, which once drained the Barge Canal area, eroded the poorly permeable Miocene-Pliocene(?) cover from the flanks of the Ocala Uplift, surface runoff was reduced and precipitation began to directly infiltrate the underlying limestones. Now only principal streams remain, such as the Oklawaha and Withlacoochee Rivers and a few short tributaries, while one of the most highly developed subsurface drainage systems in the world has evolved in cavernous limestone of the Floridan aquifer. Two of the larger freshwater springs in the world now discharge from the Floridan aquifer in the canal area. Silver Springs near Ocala discharges an average 531 mgd (million gallons per day) down the 4-mile long Silver River, which flows on poorly permeable beds to the Oklawaha River. Rainbow Springs near Dunnellon discharges on average 468 mgd from numerous orifices in the bed of the 5-mile-long Rainbow River, which flows into the Withlacoochee River. The heads of the springs have migrated to their present positions partly because of a tendency of ground-water levels to decline as permeability in the aquifer is increased due to removal of limestone by solution, and because of mechanical erosion of the limestone in the vicinity of the spring heads. Also, points of principal spring discharges have shifted in the past due to changes in ground-water levels in response to changes in sea level. The subsurface drainage system is continuing to evolve today, as evidenced in part by frequent occurrence of new sinkholes and by the presence of significant amounts of calcium bicarbonate in the spring waters. Rodman Pool, at the east end of the canal, is separated from the Floridan aquifer by poorly permeable materials. The pool's operating water level will be only a few feet above the potentiometric surface at the downstream end, and at or slightly below the potentiometric surface at the upstream end. Little exchange of water between the Rodman Pool and the Floridan aquifer is expected. Eureka Pool, just upstream from Rodman Pool, will also be separated from the Floridan aquifer by poorly permeable beds. However, the stage of the pool will be about 15 feet higher than the natural potentiometric surface at the pool's downstream end, and some seepage into the Floridan aquifer is anticipated through faults and leaky parts of the poorly permeable beds, with a consequent rise in ground-water levels in areas adjacent to the lower end of the pool. Possibilities for particulate contamination of the aquifer will tend to be minimized because of the filtering capacity of the materials through which water must pass to reach the aquifer, although the natural filter will not preclude movement into the aquifer of contaminants which might become dissolved in the pool waters. No significant interchange of water between the pool and the aquifer is expected at the upstream end of the Eureka Pool. Present construction plans indicate an operating stage for Eureka Pool which will range between 38 and 40 feet above mean sea level, although it is possible to dredge the pool deep enough to permit a range in stage of 36 to 40 feet. A backwater effect extending up Silver River from the Eureka Pool is expected to regulate the stage at the head of Silver Springs between 39 and 44 feet above mean sea level if the pool ranges between 36 and 40 feet. If Eureka Pool ranges only between 38 and 40 feet, the range of stage at the head of the springs should be about 41 to 44 feet above mean sea level. From Inglis Lock west, the canal will have direct connection with the Gulf, and canal stage will fluctuate with the Gulf tide. Since the canal stage will be slightly lower than the adjacent ground-water levels along much of the reach, there will be some ground-water inflow to the canal. No significant changes in the existing ground-water regime are expected in the vicinity of Inglis Pool, the first step up in the canal east of the Gulf. Existing ground-water and surface-water levels in the area will not change appreciable, and the natural stage and flow of Rainbow Springs, which will flow by way of Rainbow River into Inglis Pool, should not be affected by canal operations. A possible adverse effect of the canal on the Inglis Pool area could result if sea water is locked up from the Gulf through Inglis Lock. However, the high step of 25 feet at the lock, flushing action of continuous flow from Inglis Pool to the lower reaches of the Withlacoochee River, and use of possible preventive locking procedures should minimize the problem. The potential for adverse effects on the ground-water regime is greatest in the area of the Summit Pool. Through most of the length of the pool, the canal channel will be excavated into limestone of the Floridan aquifer to depths of 12 to 27 feet below the potentiometric surface. Changes that will take place in the ground-water flow system in the Silver Springs drainage area, once the canal is completed, were estimated by flow-net analysis. Variation in aquifer transmissivity was determined by calculating transmissivity in 25 different flow cells surrounding Silver Springs. Transmissivity in the 25 cells averages about 15,600,000 gpd/ft [2,090,000 ft2/day (feet squared)], but transmissivity in the six cells through which the Summit Pool passes ranges from 9,000,000 to 44,000,000 gpd/ft (1,210,000 to 5,900,000 ft2/day). Transmissivity was used to compute static stage of the Summit Pool under given ground-water level conditions. Had the canal existed in May 1968 and had the stage of Eureka Pool been held at 36 feet at the time, the static stage in Summit Pool would have been about 42.1 feet above mean sea level. Thus, a conceptual model of the changes in the potentiometric surface wrought by the finished canal was drawn, and zones of ground-water inflow and outflow were delineated. Most outflow from the Summit Pool to the aquifer should be limited to one 4-mile-long zone along the north side of the pool, about 5 miles south of Silver Springs. It is estimated that a water volume equivalent to about 8 percent of the daily flow of Silver Springs will enter the Summit Pool each day from the southern one-third of the Silver Springs drainage area. A like amount will reenter the aquifer at the main zone of outflow and move toward Silver Springs at an estimated average velocity of about 200 feet per day, if something close to the natural static stage of the pool is maintained by return pumpage of the lockage losses. At a velocity of 200 feet per day, water from the Summit Pool would discharge at Silver Springs about 140 days later. However, any estimate of velocity in the highly cavernous limestone aquifer in the area should be used with caution, because difficult to measure changes in porosity and thickness of major zones of flow may cause large variations in velocity. If all lockage losses are returned to the Summit Pool by pumping from Eureka Pool, no net loss from the Silver Springs drainage area, except for some evaporation from the water surface in the canal and possible leakage around locks, will result from canal operations. The zone of outflow from the Summit Pool to the aquifer will be in a natural potentiometric trough, and the zone of inflow will be in a potentiometric ridge area. The equilibrium water level in the pool will tend to be about 1 foot higher than the altitude of the lowest level in the pre-canal potentiometric trough, and about 2 feet lower than the highest level on the pre-canal potentiometric ridge. West of the Silver Springs drainage area just east of Dunnellon Lock, in the area of a local potentiometric high, the water level in the Summit Pool is expected to be about 15 feet below the natural potentiometric surface. In most areas 2 to 3 miles away from the Summit Pool, effects of the canal on the natural potentiometric surface should be slight. The stage of the Summit Pool, judging from the 36-year record for ground-water level changes and the anticipated indirect effect of the controlled stage in Eureka Pool, should have a maximum of about 10.5 feet with a maximum water level of about 51.5 feet above mean sea level and a minimum of about 41.0 feet above mean sea level. Of particular importance in the Summit Pool is an implementation of well planned construction and operational procedures designed to minimize risks of ground-water contamination.

Florida↗
USGS2025

Using peak geometry and shifts in the x-ray spectrum of carbon from electron probe microanalysis to determine thermal maturity of organic matter

During the burial of mudstones, the associated organic matter undergoes gradual thermal maturation, a key process that can influence the reactivity of organic matter during catagenesis, the formation of hydrocarbon deposits and the chemical weathering of mudstones. Conventional methods for assessing the thermal maturity of organic matter often fail to reflect the geochemical heterogeneity between individual organic phases in mudstone samples. Here, we report an alternative, non-destructive, surficial and micro-scale (analytical spot size of ~ 300 nm with about 4 μm diffusion depth for micrometre-size organic grains) method to evaluate the thermal maturity of organic matter in mudstones using the carbon K α X-ray spectrum measured by field emission-electron probe microanalyser (FE-EPMA). Using this method, we observed correlations between parameter values derived from FE-EPMA spectra, including the peak position, the peak area and the intra-sample heterogeneity of these measurements, and independently measured vitrinite/solid bitumen reflectance for a suite of mudstones, representing different age, geological context and burial depth. With the increased values in peak area and position, we identified an increase in the carbon mass fraction of organic matter and the mean nominal oxidation state of carbon approaching zero. These trends, which are consistent with aromatisation and graphitisation, provide the rationale for using FE-EPMA to estimate the thermal maturity of organic matter. To explore some of these trends in more detail, we employed time-of-flight secondary ionisation mass spectrometry, X-ray photoelectron spectroscopy and optical reflectance measurements on a subset of samples.

Geostandards and Geoanalytical Research↗
USGS2025

Hydrogeologic framework and conceptual model of the Red River alluvial aquifer east of Lake Texoma, southeastern Oklahoma, 1980–2022

The 1973 Oklahoma Groundwater Law (Oklahoma Statutes §82-1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s groundwater basins to support a determination of the maximum annual yield for each groundwater basin. At present (2025), the Oklahoma Water Resources Board has not established a maximum annual yield for the Red River alluvial aquifer east of Lake Texoma. To support the evaluation and determination of a maximum annual yield, a hydrogeologic framework and conceptual groundwater-flow model were developed to assess groundwater availability in the Red River alluvial aquifer east of Lake Texoma. The scope of this hydrologic investigation is the alluvium and terrace containing the Red River alluvial aquifer in Oklahoma between Lake Texoma, the Texas State line, and the Arkansas State line, an extent referred to in this report as “the eastern part of the Red River alluvial aquifer.” Parts of the alluvium and terrace extent in Arkansas and Texas are included in some analyses to address hydrologic influences from outside the aquifer’s boundaries in Oklahoma. The eastern part of the Red River alluvial aquifer in southeastern Oklahoma consists of approximately 401,280 acres of Quaternary alluvium and terrace deposits associated with the Red River and its major tributaries. Mean annual recharge to the aquifer for the 1980–2022 study period was estimated to be 8.62 inches per year, or 17.98 percent of the mean annual precipitation over the same period (47.94 inches). This mean annual recharge rate is equivalent to an inflow of approximately 288,250 acre-feet per year for the eastern part of the Red River alluvial aquifer. Recharge estimated using the Soil-Water-Balance code accounts for 98.7 percent of the conceptual-model inflows to the eastern part of the Red River alluvial aquifer. Saturated-zone evapotranspiration accounts for 11.9 percent and net streambed seepage accounts for 87.4 percent of the outflows in the conceptual model.

Arkansas, Oklahoma, Texas↗
USGS2024

Site response in the Walnut Creek–Concord region of the San Francisco Bay, California: Ground motion amplification in a fault-bounded basin

Thirty‐seven portable accelerometers were deployed in the eastern San Francisco Bay communities of Walnut Creek and Concord to study site response in a fault‐bounded, urban, sedimentary basin. Local earthquakes were recorded for a period of two years from 2017 to 2019 resulting in 101 well‐recorded events. Site response is estimated by two methods: the reference site spectral ratio method and a source‐site spectral inversion method. The reference site spectral ratio method allows investigation of the variability of site amplification with source azimuth and frequency. The source‐site spectral inversion method yields the best least‐squares fit to site response for a database of ground‐motion records. Both methods show substantial amplification in the Walnut Creek–Concord basin below 2 Hz indicating strong surface‐wave development. Greater amplification is seen for sources aligned along the long axis of the basin. Inversion using close‐in sources at short distances yields lower amplification at longer periods than the entire data set due to reduced surface‐wave generation for steeper angles of incidence. Inversion of site response spectra for shallow shear‐wave velocity using a global search algorithm yields V S30 values consistent with generalized mapping results based on geology and topography but with greater variability due to local site variations. 3D finite‐element modeling shows greater amplification in the Walnut Creek–Concord basin with a basin‐edge effect likely contributing to higher ground motions. Topography is also seen to lead to increased scattering and shadowing effects.

California↗
USGS2025

Manipulation of the Symbiodiniaceae microbiome confers multigenerational impacts on symbioses and reproductive ecology of its Exaiptasia diaphana host

Symbiodiniaceae-associated microbiota strongly influence cnidarian symbioses. We systematically reduced the bacterial and fungal communities associated with Symbiodiniaceae to study potential effects on the cnidarian holobiont Exaiptasia diaphana (Aiptasia). Clonal anemones were inoculated with xenic Breviolum minutum (SSB01) and microbiome-manipulated cultures after antibacterial or antifungal treatment. The asexual reproduction of pedal laceration allowed for three generations of clonal aposymbiotic Aiptasia to be utilised in this study, from the initial adult generation (G0), to the first (G1), and second (G2) generation. We inoculated small and large G1 Aiptasia with SSB01 algae and monitored onset of symbiosis, rate of algal proliferation, and holobiont characteristics. Sequencing the 16S and 18S rRNA gene regions identified significant differences in the bacterial and fungal communities of the G0 and G1 generations, alongside differences between the size classes of small and large G1 anemones. The microbiome of larger G1 individuals was distinct to the smaller G1 anemones, suggesting a microbiome maturation process. Control Breviolum minutum cultures exhibited a significantly greater proliferation rate in large G1 anemones when compared to antibacterial or antifungal treated cultures, whereas the opposite trend was documented in the small G1 anemones. Although no differences were observed between algal photochemical parameters, or the growth and polyp activity of G1 juveniles, we observed a significant influence in the production of G2 clones between treatments. Overall, we provide strong ecological implications of manipulating Symbiodiniaceae microbiome, not for the algae themselves, but for the maturation of the host Aiptasia, as well as for the cnidarian holobiont over multiple generations.

The ISME Journal↗
USGS2025

The systematics of stable hydrogen (δ2H) and oxygen (δ18O) isotopes and tritium (3H) in the hydrothermal system of the Yellowstone Plateau volcanic field, USA

To improve our understanding of hydrothermal activity on the Yellowstone Plateau volcanic field, we collected and analyzed a large data set of δ 2 H, δ 18 O, and the 3 H concentrations of circum-neutral and alkaline waters. We find that (a) hot springs are fed by recharge throughout the volcanic plateau, likely focused through fractured, permeable tuff units. Previous work had stressed the need for light δ 2 H water recharge restricted to the northern part of the plateau or recharge during past cold periods. However, new data from the Y-7 drill hole suggests that recharge is not restricted to a certain area or a cold period. (b) δ 18 O values of thermal waters in the geyser basins are shifted from the global meteoric water line by temperature-dependent water-rock reactions with higher subsurface temperatures resulting in a greater shift. (c) Large temporal variations in the isotopic composition of meteoric water recharge and small temporal variability in the isotopic composition of hot spring discharge implies that the volume of groundwater in, and around the Yellowstone caldera is substantially larger than the volume of annual water recharge. (d) Hot springs discharged through different rhyolitic units correlate with identifiable differences in δ 2 H and δ 18 O compositions, 3 H concentrations, and water chemistry that imply equilibration at different temperatures and travel along different flow paths. (e) Based on measured 3 H concentrations, we calculate that hot spring waters in the central part of the geyser basins mostly contain <2% post-1950 meteoric water, whereas waters discharged at the basin margins contain larger fractions of post-1950s meteoric water.

Wyoming↗
USGS2025

Melt generation sources and conditions in the wake of a migrating slab window: Geochemistry and petrology of the million-year history of primitive volcanism at Clear Lake volcanic field, California

Clear Lake volcanic field (CLVF) is the northernmost and youngest (~2.2 Ma to 8 ka) of the volcanic centers distributed along the San Andreas transform fault in western California. The initial phase of CLVF volcanism (interval one) occurred between ~2.2 and 1.3 Ma and extends ~35 km southeast of Clear Lake, forming a semi-continuous upland plateau capped by lava flows, with isolated volcanic remnants on the periphery. This volcanism is broadly characterized by geochemically primitive compositions that reflect three source compositions and conditions of melt generation. (1) Partial melting of upwelling asthenospheric mantle lherzolite at moderate pressures (1.2–1.4 GPa) and temperatures (1297–1329 °C) produced high-CaO (9.8–11.3 wt %) basalts with high Al 2 O 3 (16.8–17.6 wt %), Mg#s (66–70), MgO (8–10 wt %), Ni (103–262 μg/g), and Cr (284–609 μg/g). These high-CaO basalts contain olivine (Fo 87–91 ) phenocrysts with Cr-spinel inclusions ± subordinate plagioclase and crop out only in the southern part of the CLVF. (2) Partial melting of depleted sub-continental lithospheric mantle harzburgite at variable pressures (0.7–1.5 GPa) and temperatures (1097–1299 °C) produced a compositional continuum of med-K 2 O, calc-alkaline, high-MgO basalts through high-MgO andesites with high Mg#s (67–77), MgO (8–14 wt %) and high Ni and Cr abundances (154–439 and 340–1124 μg/g, respectively). Mineral assemblages are olivine (Fo 88–93 ) with Cr-spinel inclusions ± subordinate clinopyroxene, orthopyroxene and plagioclase. Small (<2.5 cm) mantle harzburgite xenoliths and mantle olivine xenocrysts are also found in several of these samples. These high-MgO basalts through andesites represent the largest volume of primitive compositions and have erupted predominantly along the main, fault-controlled northwest-southeast trending axis of volcanism with peripheral outcrops to the north, west, and east. (3) Partial melting of the Gorda eclogite slab edge produced adakitic silicic slab melts with strong depletion in the heavy rare earth elements (Yb = 0.6 μg/g). Subsequent reaction of those melts with depleted ultramafic rocks during ascent imprinted the adakitic dacites with high Mg#s (65–78) and elevated Ni (117–210 μg/g) and Cr (191–283 μg/g). Phenocrysts of orthopyroxene (En 87–94 ) with spinel inclusions (Cr# = 80–88) and extremely Ni-rich (9483 μg/g) olivine cores (Fo 84–93 ) record those reactions. Small-volume outcrops of the adakites on the eastern periphery of the CLVF track the passing slab edge. The trio of melting sources recorded by early CLVF magmatism reflect the tectonically complex environment and the hot (1097–1329 °C), shallow (0.7–1.5 GPa) melting conditions for these primitive compositions and provide estimates of the heat delivered to the crust. Over time, this flux led to maturation of the CLVF magmatic system toward the more voluminous and silicic volcanism that characterizes the balance of its subsequent volcanic history and maintains the present-day anomalously high heat flow in the region. The current interval (interval four) of volcanic activity at CLVF is characterized by low-volume, fault-controlled eruptions of basaltic andesite and andesite suggestive of mantle magma and heat delivery to the crust, similar to interval one. This analogous activity provides motivation for the current study and begs the question of whether the system is undergoing thermal priming for renewed silicic volcanism.

California↗
USGS2024

Deep syntectonic burial of the Anthracite belt, Eastern Pennsylvania

Fluid inclusion microthermometry and Raman spectroscopy of fluid inclusions in quartz veins from the Pennsylvanian rocks of the Anthracite belt, eastern Pennsylvania support a deep burial model of coalification in favor of focused orogenic hot fluid flow. High-temperature (250 to 255 °C) trapping of CH 4 ± CO 2 saturated aqueous fluids and CH 4 ± CO 2 inclusions indicate fluid trapping at depths of 11.5 to 13.4 km under a cover of Pennsylvanian to Permian(?) syntectonic load. In the folded rocks to the south of the Anthracite belt, CH 4 ± CO 2 fluid inclusions indicate a sediment load that was up to 16.3 km thick. Re -equilibrated aqueous fluid inclusions from veins in Silurian through Devonian rocks give the same range of trapping conditions but a wide range of fluid salinities suggesting that folding, fracturing, and meteoric recharge resulted in the intermixing of fluids from throughout the stratigraphic succession.

Pennsylvania↗
USGS2024

Surficial geology and Quaternary fault map of the Las Vegas Valley, Clark County, Nevada

The Surficial Geology and Quaternary Fault Map of the Las Vegas Valley, Clark County, Nevada is a 1:50,000-scale compilation of published 1:24,000-scale geologic maps integrated with new field and desktop mapping. This geologic map compilation and GIS database are part of a broader study on the Quaternary faults in the Las Vegas Valley, the results of which are summarized in this report. The map compilation utilized a variety of digital base maps to evaluate the characteristics of surficial deposits and Quaternary fault scarps including lidar data in undeveloped parts of the valley and orthorectified historical aerial photos in the urbanized center of the valley. The map distinguishes twenty surficial map units including alluvial-fan and ephemeral-wash deposits, groundwater discharge deposits of the Las Vegas Formation, and alluvium deposits of Las Vegas Wash. Quaternary faults include the Quaternary Las Vegas Valley fault system in the center of the valley and the Frenchman Mountain fault system along the eastern margin. All Quaternary fault traces in the valley were evaluated, and the previously published fault mapping was modified as needed. The new mapping and uniform correlation of surficial deposits displaced by Quaternary faults yields a consistent valley-wide characterization of the recency of fault activity. The map and GIS database include a Quaternary geochronology compilation of 119 previously published surficial deposit ages of various types, 35 new luminescence ages, and 3 new radiocarbon ages. The new age data further bracket the ages of the Las Vegas basin Quaternary stratigraphy and provide new constraints on the timing of Quaternary fault activity.

Nevada↗
USGS2025

The role of alkali bicarbonate-sulfate brines in the genesis of carbonatite REE resources at the Bear Lodge Alkaline Complex, Wyoming

Rare-earth element (REE) resources in the Bear Lodge Alkaline Complex, Wyoming, are hosted in a variably leached carbonatite dike swarm spatially related to bodies of diatreme breccia. This study examines fluid inclusions in carbonatite dikes, peripheral fluorite breccias, and smoky quartz veins to reconstruct the physiochemical conditions of REE mineralization. Results reveal a multi-stage evolution of carbonatitic fluids: 1) high-temperature (330–432°C), CO 2 -rich magmatic fluids, 2) REE-enriched alkali bicarbonate-sulfate brines, and 3) low-temperature meteoric (117–182°C) or diluted magmatic fluids. Multiphase inclusions (stage-2) contain burbankite, nahcolite, and alkali sulfate daughter crystals, linking the brines to early burbankite [(Na,Ca) 3 (Sr,Ba,REE) 3 (CO 3 ) 5 ] mineralization in carbonatite. REE mobility has been linked to the stability of aqueous complexes with ligands such as Cl-, SO 4 2- , and HCO 3 - . However, light REEs were not initially transported significant distances, rather they crystallized as burbankite from brines or brine-melts associated with the carbonatite magma. Crystallization of burbankite removed Na from the system, leaving residual fluids with high K/Na ratios and promoting potassic fenitization throughout the complex. Fractionation of light and heavy REEs and involvement of low temperature (<300°C), high K/Na bicarbonate brines may have facilitated transport and formation of peripheral occurrences that are more enriched in heavy REEs at Bear Lodge.

Wyoming↗
USGS1976

Effect of deicing chemicals on the hydrologic environment in Massachusetts; evaluation of surface-water data collection

The objective of this study is to develop predictive relationships that can be used to describe the impact of highway deicing salts on the hydrologic environment. A method, presented in an earlier report, for estimating yearly mean chloride concentrations from estimated or actual runoff and salt-application data was applied to the period 1971 through1974 and the results compared with yearly mean chloride concentrations computed from records of specific conductance. Estimates were found to be from minus 63 percent to plus 56 percent in error when the error was expressed as the difference between estimated and computed values as a percentage of the computed values. Chloride concentrations used in this study are computed from specific conductance/chloride concentration relationships and records of specific conductance. Preliminary results from graphic analyses and least-squares regression analysis show that relationships between measured values of specific conductance and chloride concentration have correlation coefficients ranging from 0.30 to 0.97. Analysis of streamflow for all major dissolved constituents is recommended with the purpose of attempting to describe the variations in the specific conductance/chloride concentration relationships.

Massachusetts↗
USGS2024

Geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within northern Medina County, Texas

During 2023–24, the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority, revised a previous publication of the geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers that was completed during 2018–20 within northern Medina County, Texas. The purpose of this report is to present the updated geologic framework and hydrostratigraphy of the rocks containing the Edwards and Trinity aquifers in northern Medina County from field observations of the surficial expressions of the rocks. The report includes a detailed 1:24,000-scale hydrostratigraphic map with names and descriptions of the geologic and hydrostratigraphic units (HSUs) in the study area. This study includes updates to the geology of the Kainer Formation (or its stratigraphic equivalent, the Fort Terrett Formation) with the addition of a burrowed unit between the basal nodular and dolomitic members. The hydrostratigraphy was also updated with the addition of HSU IIA for the upper part of the Devils River Limestone and the Seco Pass HSU for the burrowed member of the Kainer (or Fort Terrett) Formation. The Cretaceous age rocks (listed in ascending order) in the study area are part of the Trinity Group, Edwards Group and stratigraphically equivalent Devils River Limestone, Washita Group, Eagle Ford Group, Austin Group, and Taylor Group, with isolated areas where Late Cretaceous age igneous rocks have intruded. The groups and formations are composed primarily of relatively thick layers of clays, shales, and limestone. The igneous rocks are coarse-grained ultramafic in composition. Hydrostratigraphically, the rocks exposed in the study area (listed in descending order from land surface) are igneous, the upper confining unit to the Edwards aquifer, the Edwards aquifer, the upper zone of the Trinity aquifer, and the upper part of the middle zone of the Trinity aquifer. The karstic carbonate Edwards and Trinity aquifers developed because of their original depositional history, primary and secondary porosity, diagenesis, fracturing, and faulting. These factors have resulted in development of modified porosity, permeability, and transmissivity within and between the aquifers.

Texas↗
USGS2025

Simulation of the impacts of projected climate change on groundwater resources in the urban, semiarid Yucaipa Valley watershed, southern California using an integrated hydrologic model

Managing water resources in semiarid watersheds is challenging due to limited supply and uncertain future climate conditions. This paper examines the impact of future climate changes on an urban watershed in southern California using an integrated hydrologic model. GSFLOW modeling software is used to simulate the nonlinear relationships between climate trends and precipitation partitioning into ET, runoff, and subsurface storage. Four global circulation models (GCMs), each with two greenhouse-gas scenarios, RCP45 and RCP85 are used to project future climate conditions. GCMs include the CanESM2, CNRM-CM5, HadGEM2-ES, and MIROC5 models. The model's simulated hydrologic conditions are compared with historical data to assess changes in water budgets and groundwater supply. Results indicate decreased groundwater storage in most scenarios due to increased natural evapotranspiration, vegetation consumptive use, and streamflow out of the watershed. Only scenarios with substantially increased future precipitation show increased groundwater storage. The study also highlights increased future aridity despite the rise in precipitation and large precipitation events forecast by GCMs, which increase the risk of urban floods and decrease stream leakage and water available to vegetation.

California↗
USGS2025

The influence of nodule versus crust morphology on the composition of seamount-hosted ferromanganese minerals

Ferromanganese mineral precipitation in the global oceans is ubiquitous, occurring in the form of both crusts and nodules at a broad range of depths and seafloor terrains. Although ferromanganese crusts and nodules are both composed of ferromanganese minerals, mineralogy and mean element concentrations compiled for regional crust versus nodule occurrences differ. Notably, most published compilations compare nodules from abyssal plain sediments to crusts forming on seamounts, and do not address the question as to whether mineral morphology may affect the composition of crusts and nodules in addition to environmental factors. To address this, we have compiled a dataset of co-located hydrogenetic (seawater sourced) open-ocean ferromanganese crusts and seamount-hosted nodules. The preliminary data presented here support our hypothesis that co-located crusts and nodules exhibit similar compositions, both in terms of their mineralogy and mean element concentrations, as well as overall variance in concentrations for any given element. These data indicate that local processes influence sample-to-sample variation in both crusts and nodules, in contrast to broader ferromanganese variation reported between open-ocean seamounts- hosted crusts and abyssal plain-hosted nodules.

Conference Paper↗
USGS2024

A seismic nodal deployment to understand magmatic structure in the vicinity of the Pahala earthquake swarm

In summer-fall 2022, 80 three-component SmartSolo IGU-BD3C-5 nodal seismometers were deployed surrounding the Pāhala seismic swarm on the Island of Hawaiʻi, with the goal of improving seismicity catalogs, and seismic velocity images of the crust and upper mantle in this region. The Pāhala swarm, located south of Mauna Loa and Kīlauea, has been the site of a multiyear sustained swarm of seismicity at depths of ~ 25 – 40 km, with order of magnitude increases in rate in 2015, and then again in 2019. This seismicity is possibly related to the input of magma from the mantle plume below, which may then be subsequently transported to volcanic edifices. However, these processes remain enigmatic, in part due to a lack of precise earthquake locations and seismic velocity models in this region. Here we provide an overview of the deployment, an assessment of the quality of the collected data, and discuss the viability of the dataset for local earthquake relocation, tomography, and teleseismic receiver functions. Through comparisons with proximal permanent broadband and short period instruments, we find that the nodes produce high quality data, particularly at periods shorter than 5 s, although we find, document, and correct discrepancies with the gain and polarities of the instruments. We successfully record signals from teleseismic earthquakes, even at periods longer than 5 s (the corner of the flat response of the nodes). We also record local earthquakes, including details related to source characteristics. This indicates that the data is likely to prove useful for investigations using both local and teleseismic earthquake signals to better understand the connections between the deep and shallow magmatic systems of Hawaiʻi. While this deployment provides a snapshot in time, its success may provide a useful benchmark for future studies as the volcanic systems of Hawaiʻi continue to evolve in the future.

Hawaii↗