USGS Science⌕ Search

SEARCH · USGS Science

Results for “Marine Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

Change in morphology and modern sediment thickness on the inner continental shelf offshore of Fire Island, New York between 2011 and 2014: Analysis of hurricane impact

Seafloor mapping investigations conducted on the lower shoreface and inner continental shelf offshore of Fire Island, New York in 2011 and 2014, the period encompassing the impacts of Hurricanes Irene and Sandy, provide an unprecedented perspective regarding regional inner continental shelf sediment dynamics during large storm events. Analyses of these studies demonstrate that storm-induced erosion and sediment transport occurred throughout the study area in water depths up to 30 m. Acoustic backscatter patterns were observed to move from ~1 m to 450 m with a mean of 20 m and movement tended to decrease with increasing water depth. These patterns indicate that both of the primary inner continental shelf sedimentary features in the study area, linear sorted bedforms offshore of eastern Fire Island and shoreface-attached sand ridges offshore of central and western Fire island, migrated alongshore to the southwest. The migration of the sorted bedforms represents the modification of an active ravinement surface and is thought to have liberated a significant volume of sediment. Comparison of isopach maps of sediment thickness show that the volume of modern sediment composing the lower shoreface and shoreface-attached sand ridges decreased by ~2.8 × 106 m3 across the ~73 km2 of common seafloor mapped in both surveys. However, a similar analysis for the relatively calmer 15-yr period prior to 2011 revealed significant accretion. This allows speculation that the shoreface-attached sand ridges are maintained over decadal timescales via sediment supplied through erosion of Pleistocene outwash and lower Holocene transgressive channel-fill deposits exposed on the inner continental shelf, but that the sand ridges also periodically erode and move to the southwest during large storm events. Analyses show that significant storminduced erosion and sediment transport occurs far seaward of the 5 to 9 m depth of closure assumed for Fire Island, where it is thought that an onshore-directed sediment flux from the inner continental shelf to the littoral system is required to balance the coastal sediment budget. It is also thought that the morphology of the shoreface-attached sand ridges controls the persistent shape of the adjacent shoreline through modification of incident waves. Thus, we suggest that the sediment dynamics of the inner continental shelf and both storminduced and anthropogenic modification of the field of shoreface-attached sand ridges be considered in future coastal resiliency planning.

New York↗

The role of deep-water sedimentary processes in shaping a continental margin: The Northwest Atlantic

The tectonic history of a margin dictates its general shape; however, its geomorphology is generally transformed by deep-sea sedimentary processes. The objective of this study is to show the influences of turbidity currents, contour currents and sediment mass failures on the geomorphology of the deep-water northwestern Atlantic margin (NWAM) between Blake Ridge and Hudson Trough, spanning about 32° of latitude and the shelf edge to the abyssal plain. This assessment is based on new multibeam echosounder data, global bathymetric models and sub-surface geophysical information. The deep-water NWAM is divided into four broad geomorphologic classifications based on their bathymetric shape: graded, above-grade, stepped and out-of-grade. These shapes were created as a function of the balance between sediment accumulation and removal that in turn were related to sedimentary processes and slope-accommodation. This descriptive method of classifying continental margins, while being non-interpretative, is more informative than the conventional continental shelf, slope and rise classification, and better facilitates interpretation concerning dominant sedimentary processes. Areas of the margin dominated by turbidity currents and slope by-pass developed graded slopes. If sediments did not by-pass the slope due to accommodation then an above grade or stepped slope resulted. Geostrophic currents created sedimentary bodies of a variety of forms and positions along the NWAM. Detached drifts form linear, above-grade slopes along their crests from the shelf edge to the deep basin. Plastered drifts formed stepped slope profiles. Sediment mass failure has had a variety of consequences on the margin morphology; large mass-failures created out-of-grade profiles, whereas smaller mass failures tended to remain on the slope and formed above-grade profiles at trough-mouth fans, or nearly graded profiles, such as offshore Cape Fear.

Marine Geology↗

Controls on submarine canyon head evolution: Monterey Canyon, offshore central California

The Monterey submarine canyon, incised across the continental shelf in Monterey Bay, California, provides a record of the link between onshore tectonism, fluvial transport, and deep-marine deposition. High-resolution seismic-reflection imaging in Monterey Bay reveals an extensive paleocanyon unit buried below the seafloor of the continental shelf around Monterey and Soquel canyon heads. Paleocanyons shifted position through numerous phases of cut-and-fill in response to Salinas, Pajaro, and San Lorenzo river extensions and avulsions across the continental shelf during high-frequency Pleistocene sea-level and climatic variations. Five seismic facies within the Monterey paleocanyon unit and below the modern canyon are defined to interpret canyon evolution during the Pleistocene. Repeated sea-level oscillations appear to have switched the main fairway(s) of sediment transport. Large-scale erosion and fill occurred in marine environments. Paleocanyon fill is characterized by paleo-axial channel deposits and mass transport deposits, followed by canyon head abandonment and marine sedimentation. The upper portion of the paleocanyon unit contains relatively small channels that were likely incised by erosion in the paleo-Salinas and Pajaro rivers and filled with a mix of nonmarine and marine deposits. Shifting position of submarine canyons over time is characteristic of Monterey Bay, east of the Monterey Bay Fault Zone, and is likely unidentified in other submarine canyon head regions that lack dense high-resolution seismic-reflection subbottom images. We show that canyon heads can be areas of sediment accumulation linked to sea-level oscillations, providing new insights into submarine canyon evolution and sequence stratigraphy.

California↗

Storm impacts on hydrodynamics and suspended-sediment fluxes in a microtidal back-barrier estuary

Recent major storms have piqued interest in understanding the responses of estuarine hydrodynamics and sediment transport to these events. To that end, flow velocity, wave characteristics, and suspended-sediment concentration (SSC) were measured for 11 months at eight locations in Chincoteague Bay, MD/VA, USA, a shallow back-barrier estuary. Daily breezes and episodic storms generated sediment-resuspending waves and modified the flow velocity at all sites, which occupied channel, shoal, and sheltered-bay environments with different bed-sediment characteristics. Despite comparable SSC during calm periods, SSC at the channel locations was considerably greater than at the shoal sites during windy periods because of relatively more erodible bed sediment in the channels. Sediment fluxes were strongly wind modulated: within the bay’s main channel, depth-integrated unit-width sediment flux increased nonlinearly with increasing wind speed. When averaged over all sites, about 35% of the flux occurred during windy periods (wind speed greater than 6 m s −1 ), which represented just 15% of the deployment time. At channel sites, the net water and sediment fluxes were opposite to the direction of the wind forcing, while at shoal sites, the fluxes generally were aligned with the wind, implying complex channel– shoal dynamics. Yearly sediment fluxes exceed previous estimates of sediment delivery to the entirety of Chincoteague Bay. These observations illustrate the dynamic sedimentary processes occurring within microtidal back-barrier lagoons and highlight the importance of storm events in the hydrodynamics and overall sediment budgets of these systems.

Maryland↗

Morphodynamics of a field of crescent-shaped rippled scour depressions: Northern Monterey Bay, CA

Despite the prevalence of rippled scour depression (RSD) on the world's continental shelves and their importance as nursery habitats for many commercially-important species, the processes responsible for their formation and geomorphic evolution are still not well understood. Most studies that focused on RSD evolution have been based on data acquired over multiple years to decades, and often during calmer summer months. Here, multiple geophysical seafloor mapping surveys of a field of RSD's off Santa Cruz, California, USA, were conducted over the course of two winters with distinctly different oceanographic forcing; these results were compared to time series oceanographic measurements made within the survey area, and put into the context of long-term trends from survey data collected during previous decades. Although the migration of these features across the seafloor occurs on decadal time scales, significant change was detected within a given year, depending on the wave climate and fluvial sediment input. RSDs shrank up to 16% or grew up to 28% in a span of a few months. Such change was predominantly the result of redistribution of fine-grained sediment input to the system by local rivers. Migration of the seafloor features appears to be the result of accumulation of fine-grained sediment at the boundary between the RSD and the surrounding fine-grained cap.

California↗

Morphology and genesis of giant seafloor depressions on the southeasterncontinental shelf of the Korean Peninsula

We identify and describe five giant seafloor depressions from the southeastern continental shelf of the Korean Peninsula using multibeam bathymetry, sub-bottom profiler, and multi-channel seismic reflection data, supplemented by piston cores. Multibeam bathymetry data from the shelf show four crescent-shaped depressions (SD1 to SD4) and one near-circular depression (SD5) within a group of NW-SE trending depressions, the largest covering an area of about 7 km 2 on the seafloor. The depressions reach up to ~4.5 km in width and ~2 km in length and have asymmetric cross-sections. Some have depths as large as 40 m below the surrounding seafloor with walls as steep as 45°. The depressions are confined to water depths between 130 and 170 m and bounded on the north by a large submarine channel that was plausibly formed by fluvial or tidal processes during the Last Glacial Maximum (LGM) sea-level lowstand. Multi-channel seismic and sub-bottom profiler data reveal truncated depression walls and the presence of sediment drift deposits within the depressions, indicating that both erosion and deposition are active processes. Flaser and lenticular bedding in the cored drift deposits along with variable grain size (ranging between ~2.6 phi and ~4.3 phi) are diagnostic features of the bottom currents influenced by tidal forces. Depressions SD1 to SD4 lack evidence of fluid or gas escape. In contrast, many features of depression SD5 are characteristic of gas escapes and blowouts, including acoustic anomalies, a 20-m-high carbonate mound or carbonate-encrusted mound, and mud dikes and mud patches in cores. Based on the SD5 example, we think it is likely that the other crescent-shaped seafloor depressions formed originally as pockmarks by gas/fluid venting, and have since become inactive. The pockmarks represent zones of weakened sediment that were eroded, expanded, and merged by bottom currents to form larger seafloor depressions. Modern currents are strong enough to transport shelf sediments, and these currents were probably much stronger at lower sea levels when the Korea Strait was a more restricted passage between the East China Sea and East Sea.

Korea Strait↗

Anthropogenic pollutants and biomarkers for the identification of 2011 Tohoku-oki tsunami deposits (Japan)

Organic geochemistry is commonly used in environmental studies. In tsunami research, however, its applications are in their infancy and it is still rarely used. We present results for two types of organic geochemical markers, biomarkers and anthropogenic markers, present in deposits left by 2011 Tohoku-oki tsunami on the Sendai Plain, Japan. As the tsunami inundated the coastal lowland up to 4.85 km inland, sediments from various sources were eroded, transported and deposited. This led to the distribution of biomarkers from different sources across the Sendai Plain creating a unique geochemical signature in the tsunami deposits. The tsunami also caused destruction along the Sendai coastline, leading to the release of large quantities of environmental pollutants (e.g., fossil fuels, tarmac, pesticides, plastics, etc.) that were distributed across the inundated area. These anthropogenic markers, represented by three main compound groups (polycyclic aromatic hydrocarbons, pesticides, and halogenated compounds), were preserved in tsunami deposits (at least until 2013, prior to land clearing). Their concentrations differed significantly from the pre- and post-tsunami background contamination levels. Organic proxy concentrations can differ for sand and mud deposits due to various factors (e.g., preservation, dilution, microbial alteration). However, it can be concluded that anthropogenic markers and biomarkers have the potential to be a valuable proxy for future studies of recent tsunami deposits because of their high source specificity and relatively good preservation potential providing information about sediment sources and transport pathways (e.g., marine source, evidence of backwash).

Sendai↗

Sediment export and impacts associated with river delta channelization compound estuary vulnerability to sea-level rise, Skagit River Delta, Washington, USA

Improved understanding of the budget and retention of sediment in river deltas is becoming increasingly important to mitigate and plan for impacts expected with sea level rise. In this study, analyses of historical bathymetric change, sediment core stratigraphy, and modeling are used to evaluate the sediment budget and environmental response of the largest river delta in the U.S. Pacific Northwest to western land-use change beginning in ~1850. An estimated 142±28 M m 3 of sediment accumulated offshore of the emergent Skagit River delta in Washington State between 1890 and 2014 and ~68% of which was found in sand deposits. The fraction of sediment retained in sand reservoirs represents 83% of the expected fluvial sand delivery over this time suggesting their potential utility to evaluate the relative contribution of different land uses to sediment runoff through time. A significantly higher ratio of sand retention to delivery during the period 1890–1939 coincided with extensive watershed denudation (clear-cut logging) and channel dredging, relative to the period 1940–2014, which was characterized by improved forest practices and sediment management to protect endangered species but also more extensive river channelization. Retention in the delta foreset of 78% of the sand delivered by the river between 1890 and 1939 was associated with extensive sediment bypassing and delta progradation that is shown to be 5–10x higher than rates over the Holocene. Comparable offshore sand retention over time and higher nearshore retention subsequent to 1940 after normalizing for the assumed reduction in sediment runoff with improved forest practices, suggests that channelization has continued to influence sediment export at a magnitude equivalent to the effects of early logging. Adverse impacts of the bypassing sediment regime to natural hazards risk and ecosystem management concerns are discussed, including the role of the lost sediment as a resource to mitigate subsiding coastal lands vulnerable to flood impacts. The sediment budget and coastal change analyses provide a framework for evaluating opportunities to achieve greater resilience across several sectors of coastal land use important in low-lying deltas worldwide.

Washington↗

Complex sedimentary processes in large coastal embayments and their potential for coastal morphological and paleo tropical cyclone studies: A case study from Choctawhatchee Bay Western Florida, U.S.A

Storminess and sea-level can both have a significant impact on landforms in cyclone-prone coastal regions, although much of our understanding comes from short-timescale modern observations. This study aims to understand the variability of sediment transport and deposition in the Choctawhatchee Bay/Santa Rosa Island in the northern Gulf of Mexico, establishing the dominant sediment transport processes and morphological response of the barrier system to long-term variations in storminess and rising sea-levels. Here, we study the spatial and temporal changes in physicochemical properties of the sedimentary record of Choctawhatchee Bay to examine the character and fidelity of records of storm impacts spanning the Holocene. Proxies for marine and terrestrial conditions in the cores situated closer to the present barrier (proximal) show that sedimentation in coastal areas and marine influence of the bay during the last ~8000 yrs. were mainly determined by barrier response to the Holocene transgression and changes in storminess. In contrast, sedimentation close to the landward shore was governed by terrigenous input. The correlation of grain size and terrigenous proxies with regional hurricane records indicates that hinterland erosion by the rainfall during hurricane events is likely the dominant terrigenous sediment transport mechanism in areas close to the landward shore of the bay. These results suggest that sediment archives in large coastal deposition environments are equally suitable for sea level and cyclone modulated coastal morphological studies and paleo tropical cyclone studies, depending on the location, selected with an understanding of sedimentation processes in the vicinity.

Florida↗

Geochemical insights into formation of enigmatic ironstones from Rio Grande rise, South Atlantic Ocean

Rio Grande Rise (RGR) is an intraplate oceanic elevation in the South Atlantic Ocean that formed at a hotspot on the Mid-Atlantic Ridge during the Cretaceous. In spreading center and hotspot environments, ironstones form mainly by biomineralization of reduced Fe from hydrothermal fluids or oxidation of sulfide deposits. However, RGR has been considered aseismic and volcanically inactive for the past 46 Ma. Here, we investigate the origin of ironstones collected from the summit of RGR using multiple techniques: petrographic observations, X-ray diffraction, U-Th/He geochronology, and chemical composition. The ironstones from RGR consist of finely laminated goethite containing igneous rock fragments, carbonate fluorapatite, and calcite. Our results suggest that Fe oxyhydroxides were precipitated by Fe-oxidizing bacteria forming bacterial mats. The bacterial Fe mats underwent compaction, dewatering, goethite crystallization, and cementation that created the ironstone deposits. U-Th/He geochronology reveals protracted goethite minimum ages extending from the late Miocene to the Quaternary, probably due to multiple generations of mats, slow mineralization rates, and Fe-oxide dissolution-reprecipitation cycles. Flame-like goethite structures underneath FeMn crusts and a chimney-shaped goethite sample with a central channel indicate that the dewatering fluid flowed upward through the deposits, or a thermal fluid source may have been introduced from below the ironstone deposits. High Fe/Mn ratios, low trace metals contents (Ni + Co + Cu), and very low Fe/REY ratios suggest ironstone precipitation from a hydrothermal fluid; however, REY SN plots and bivariate Ce SN /Ce SN ⁎ versus Y SN /Ho SN and Ce SN /Ce SN ⁎ versus Nd plots are inconclusive, and a proximal source of magma was unlikely during the period of mat formation. Given this evidence, we hypothesize that a geothermal circulation system may have facilitated ironstone mineralization at RGR.

Marine Geology↗

Primary deposition and early diagenetic effects on the high saturation accumulation of gas hydrate in a silt dominated reservoir in the Gulf of Mexico

On continental margins, high saturation gas hydrate systems (>60% pore volume) are common in canyon and channel environments within the gas hydrate stability zone, where reservoirs are dominated by coarse-grained, high porosity sand deposits. Recent studies, including the results presented here, suggest that rapidly deposited, silt-dominated channel-levee environments can also host high saturation gas hydrate accumulations. Here we present several sedimentological data sets, including sediment composition, biostratigraphic age from calcareous nannofossils, grain size, total organic carbon (TOC), C/N elemental ratio, δ 13 C-TOC , CaCO 3 , total sulfur (TS), and δ 34 S-TS from sediments collected with pressure cores from a gas hydrate rich, turbidite channel-levee system in the Gulf of Mexico during the 2017 UT-GOM2-1 Hydrate Pressure Coring Expedition. Our results indicate the reservoir is composed of three main lithofacies, which have distinct sediment grain size distributions (type A-silty clay to clayey silt, type B-clayey silt, and type C-sandy silt to silty sand) that are characteristic of variable turbidity current energy regimes within a Pleistocene (< 0.91 Ma) channel-levee environment. We document that the TOC in the sediments of the reservoir is terrestrial in origin and contained within the fine fraction of each lithofacies, while the CaCO 3 fraction is composed of primarily reworked grains, including Cretaceous calcareous nannofossils, and part of the detrital load. The lack of biogenic grains within the finest grained sediment intervals throughout the reservoir suggests interevent hemipelagic sediments are not preserved, resulting in a reservoir sequence of silt dominated, stacked turbidites. We observe two zones of enhanced TS at the top and bottom of the reservoir that correspond with enriched bulk sediment δ 34 S, indicating stalled or slowly advancing paleo-sulfate-methane transition zone (SMTZ) positions likely driven by relative decreases in sedimentation rate. Despite these two diagenetic zones, the low abundance of diagenetic precipitates throughout the reservoir allowed the primary porosity to remain largely intact, thus better preserving primary porosity for subsequent pore-filling gas hydrate. In canyon, channel, and levee environments, early diagenesis may be regulated via sedimentation rates, where high rates result in rapid progression through the SMTZ and minimal diagenetic mineralization and low rates result in the stalling of the SMTZ, enhancing diagenetic mineralization. Here, we observed some enhanced pyritization to implicate potential sedimentation rate changes, but not enough to consume primary porosity, resulting in a high saturation gas hydrate reservoir. These results emphasize the important implications of sedimentary processes, sedimentation rates, and early diagenesis on the distribution of gas hydrate in marine sediments along continental margins.

Alabama, Louisiana, Mississippi↗

Subaqueous clinoforms created by sandy wave-supported gravity flows: Lessons from the central California shelf

Subaqueous clinoforms are an important yet underappreciated shelf feature. Their origins are typically associated with subaerial deltas but recent work has identified similar features in settings without a significant fluvial source. These other studies have shown that such subaqueous clinoforms, also known as infralittoral prograding wedges (IPWs), are created largely by wave-induced processes. This study uses geophysical, sedimentological, and radiocarbon data to determine the sedimentary characteristics and genesis of a shore-parallel subaqueous clinoform developed far from any significant river on the central California continental shelf; a feature known locally as the Cross Hosgri Slope. Sediment cores through the feature reveal that it is composed of beds with an erosive base, followed by a thin coarsening upward sequence of shelly fine sands transitioning to a fining upward sequence marked by alternating parallel and ripple cross laminated very fine sands. The deposit is often capped by fine silts that are commonly interbedded with thin very fine sand beds. Radiocarbon dating of shells within the cores paired with seismic profiles indicate the subaqueous clinoform initiated progradation ~7 ka, nucleating on an older Younger Dryas relict shoreface. We suggest the CHS was created by winter-storm waves mobilizing sands in water depths up to ~ 70 m that transitioned into wave-supported gravity flows. The wave-supported gravity flows traveled downslope to water depths of up to ~85 m, corresponding to the foot of the subaqueous clinoform. They did not travel beyond this depth as wave influence at these depths is negligible and the shelf slope is insufficient to maintain movement of the load alone. Our work suggests that wave-supported gravity flows can entrain very fine sands and silts and build subaqueous clinoforms, even in the absence of a significant river source. Furthermore, we provide a facies model for sandy wave-supported gravity flow deposits.

California↗

Late Pleistocene-Holocene age and stratigraphy of the Currituck Slide Complex, U.S. mid-Atlantic continental slope: Implications for landslide triggering

Considerable effort has been made to link submarine slope failures to changes in local and global-scale environmental conditions, in order to assess landslide hazard probability. Here we provide the first radiocarbon dates of hemipelagic sediment overlying mass transport deposits and inferred failure surfaces of the Currituck Slide Complex (CSC), a prominent landslide scar on the U.S. mid-Atlantic continental slope. The dates, taken from both the upper and lower scars of the complex, constrain the age of the last major failure event to 13,835 and 16,020 years BP. Time correlation of the hemipelagic sediments across the landslide scar and proximal deposit suggests a single failure of both the upper and lower parts of this 160 km 3 volume. A higher rate of sediment supply from the periglacial Appalachian Mountains and from glacial melt-water pulses, with an exposed continental shelf at that time, may have enlarged a shelf-edge delta at the site of the CSC, which may have facilitated or triggered failure. A smaller landslide at the southern edge of the complex with a less well-defined geomorphologic footprint is dated at 5500 BP and possibly represents the reshaping of the seafloor around the CSC triggered by low-frequency earthquakes on the nearby continental margin.

Marine Geology↗

Methane seeps on the U.S. Atlantic margin: An updated inventory and interpretative framework

Since the discovery of >570 methane flares on the northern U.S. Atlantic margin between Cape Hatteras and Georges Bank in the last decade, the acquisition of thousands of kilometers of additional water column imaging data has provided greater coverage at water depths between the outer continental shelf and the lower continental slope. The additional high-resolution data reveal >1400 gas flares, but the removal of probable duplicates from the combined database of new flares and those recognized in 2014 yields ∼1139 unique sites. Most of these sites occur in clusters of 5 or more seeps, leaving about 275 unique locations (including 47 clusters) for seepage along the margin. As a function of depth, seep distribution is heavily skewed toward the upper continental slope at water depths shallower than 400 m on the southern New England margin and ∼ 550 m in the Mid-Atlantic Bight, with additional seeps clustered at ∼1100 m and just deeper than ∼1400 m in both sectors. Despite little ongoing tectonic deformation or active faulting on this passive margin, a variety of processes driven from below the seafloor (e.g., migration of fluids along faults or through permeable strata, seepage above diapirs or other pre-existing structures) and from above (e.g., erosion, sapping, unroofing) contribute to the development of seeps in different settings along the margin. In addition, the prevalence of seeps on promontories overlooking shelf-breaking canyons may be directly related to the three-dimensional nature of the hydrate stability zone in these locations. As a function of depth, the parts of the slope at the contemporary landward limit of gas hydrate stability are devoid of seeps, and the upper slope zones with the most concentrated seepage were not within the gas hydrate stability zone even during the Last Glacial Maximum. Thus, if the large number of upper slope seeps is at least partially sourced in gas hydrate degradation, the gas emitted at these seeps must have migrated there from greater depths on the continental slope.

Marine Geology↗

Insights on gas hydrate formation and growth within an interbedded sand reservoir from well logging at the Qiongdongnan Basin, South China Sea

Although variable well log resolution and its control on saturation estimation has been studied, it has not been directly applied to a specific location to explore the nature of gas hydrate within a sand reservoir. We applied in-situ measurements of resistivities, neutron porosity, and gamma ray at two sites in the Qiongdongnan Basin, South China Sea (QDN-W05–2021 and QDN-W08–2021) to investigate the reservoir parameters of a hydrate-bearing sand reservoir. Our results show that gas hydrate is distributed in 5 zones with a total thickness of 10.7 m and an average saturation of 69% at the QDN-W05–2021 site, while they are distributed in 2 zones with a total thickness of 4.3 m and an average saturation of 49% at the QDN-W08–2021 site. We found that variances in saturations estimated from lateral-extra deep button (RX), phase shift (P40H-P40L), and attenuation (A40H-A40L) resistivities within the laterally mapped continuous sand body were affected by the nature of gas hydrate occurrences. Results indicate gas hydrate forms and accumulates at the center of the sand layer and tends to be less or not present toward the top and base. Integrated with seismic data, the in-situ measurements provide insights in the evolution of a mushroom-shaped, hydrate-gas reservoir system. In the system, free gas is likely horizontally transported from the top-center of the gas chimney to the surrounding areas in the early stage dominated by a warm-gas environment, whereas hydrate forms in the opposite pathway starting from the surrounding areas in the following stage with temperature reducing. Our study suggests that high-resolution in-situ measurements not only are a tool to identify the physical properties, but also can be used to help explain the physical process of hydrate growth and accumulation.

Marine Geology↗

Discerning sediment provenance in the Outer Banks (USA) through detrital zircon geochronology

Detrital zircon data from modern barrier island and estuarine environments in the Outer Banks (Atlantic Coast, USA) were statistically compared to sands from nearby rivers to assist in determining source-to-sink pathways. Fluvial samples, collected from near the Fall Line contact between the Appalachian Orogen and sediments of the coastal plain, all have age unique distributions, making them ideal for tracing provenance. Three samples from the Atlantic foreshore showed high similarities to one another, as well as to three samples from the estuarine (back-barrier) Pamlico and Albemarle Sounds. Mixture modeling with multiple data reduction methods and three different statistical tests for similarity consistently indicated that the nearby Potomac River was the primary source for all Atlantic foreshore and estuarine zircons, followed by minor contributions from the James River in some models. The models indicate little or no sediment contribution from the Susquehanna, Roanoke, Tar, Neuse, Cape Fear, and Peedee Rivers. Both Atlantic foreshore and estuarine sands are therefore interpreted to have initially originated from Appalachian bedrock to the north of their present-day location, and subsequently to have been transported southward through the Chesapeake Bay watershed before deposition in Virginia and North Carolina. Prior to barrier island formation in the last several thousand years, differing geomorphology of the Chesapeake Bay facilitated southward movement of sediments from its constituent rivers via longshore drift, where they were deposited in coastal settings on the mainland. The modern barrier islands, formed during the most recent post-glacial transgression, may be reworked from these deposits, but may also include a contribution from sediments that were derived more recently from relict deposits on the shelf. Oceanographic and sedimentological evidence suggests that movement of sand-sized grains from southern rivers across the back-barrier sounds is unlikely. These findings can assist with coastal resilience planning and resource management in a region under severe threat from climate change and rising sea levels.

North Carolina, Virgina↗

Formation of vertical columnar seismic structures and seafloor depressions by groundwater discharge in the drowned Miami Terrace platform and overlying deep-water carbonates, southeastern Florida

The presence of vertical cross-formational fluid migration passageways within sedimentary basins can profoundly impact aquifer and reservoir fluid-flow and their identification is fundamental to informing management of subsurface fluid resources (groundwater, oil, gas). In an onshore and offshore southeastern part of Florida, 2D/3D seismic-reflection and bathymetry data document ∼153 vertical columnar structures composed of reflection disruptions up to 790 m in the height and averaging 360 m in diameter, and ∼219 subcircular to circular seafloor depressions up to 1334 m wide. Our study focuses on these features found within the offshore shallow-marine carbonate Miami Terrace platform, which drowned approximately at the end of the middle Miocene, and within overlying Plio-Quaternary deep-water carbonate slope and drift deposits. Most columnar structures are rooted in stratiform aquifers of the Miami Terrace platform and associated with faults or fault intersections produced by Eocene and circa late Miocene tectonics. The columns commonly terminate within the platform or as subcircular depressions along an amalgamated karstic and drowning unconformity at the platform top. The columns typically stretch upwards from a zone of deep karst cavity collapse through the Miami Terrace platform with upward decreasing sag on internal reflections. Following drowning and Plio-Quaternary partial burial of the Miami Terrace platform by deep-water deposits, the subcircular depressions and faults along the platform top were points of origin for a second phase of column growth upward into the deep-water deposits. The continuation of deep platform cavity collapse and column evolution produced pockmarks along paleo-seafloors within the deep-water deposits and at the present-day sea floor. The Plio-Quaternary pockmarks formed at water depths too deep to suggest an origin related to meteoric karst above or near sea level, but rather their formation is suggested to be related to cyclic sea level falls that drove increased groundwater head and density gradients, and seafloor discharge of offshore freshened groundwater sourced from the underlying platform. Plausibly, mixing of freshened groundwater and seawater at the seafloor discharge sites drove dissolution of the host deep-water deposits, which together with erosion by groundwater venting and current scouring formed the pockmarks. Seaward of the Plio-Quaternary seafloor pockmarks, at the late-middle Miocene upper slope of the Miami Terrace platform and along the regional karst/drowning unconformity is a slope-parallel band of ∼189 densely distributed subcircular seafloor depressions with diameters up to 1334 m at water depths up to ∼660 m. It is plausible that along the upper slope, faults and fractures produced by gravity-driven slope instability and possibly tectonics formed a dense network of fluid passageways that promoted upward artesian freshened groundwater flow to sites of discharge where mixing with seawater generated limestone dissolution and the depressions. But tectonic uplift may have forced emersion and initial meteoric sinkhole formation circa late Miocene with later enhancement by freshened groundwater discharge and bottom current erosion.

Florida↗

Submarine canyon sediment transport and accumulation during sea level highstand: Interactive seasonal regimes in the head of Astoria Canyon, WA

The majority of submarine canyons on Earth today do not directly intersect littoral or fluvial sediment sources, yet these systems are rarely studied. The shelf-incised head of Astoria Canyon receives sediment from the nearby Columbia River and is subject to energetic forcing from shelf and slope processes, making it an ideal site to evaluate the modern activity of canyons in high-stand sea level conditions. This study uses in-situ data from Astoria Canyon to identify the active sediment transport processes and patterns of accumulation in temperate canyon systems that are decoupled from their sediment sources during sea level highstand. Hydrodynamic data from a benthic tripod deployment in the head of Astoria Canyon shows that sediment resuspension and transport during summer is driven by internal tides and plume-associated nonlinear internal waves. Observations of shoreward-directed currents and low shear stresses (<0.14 Pa) along with sediment trap data suggest that seasonal loading of the canyon head occurs during summer. Nearby long-term wave data show that winter storm significant wave height often exceeds 10 m, driving shear stress capable of resuspending all grain sizes present within the canyon head. Swell events are generally concurrent with downwelling flows, providing a mechanism for episodic downcanyon sediment flux. Century-scale accumulation rates evaluated from sediment cores show slow accumulation in the upper canyon head, but rates progressively increase with depth to at least 300 m. The depositional environment in Astoria Canyon continues to respond to fluvial and oceanic forcing over an annual cycle. This study indicates that canyon heads can continue to function as sites of sediment winnowing and bottom boundary layer export even with a detached, shelf-depth canyon head.

Washington↗