USGS ScienceSearch

SEARCH · USGS Science

Results for “Journal of the Air & Waste Management Association”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 30Linked to original sources

Preliminary observations of the April 5th, 2024, Mw4.8 New Jersey earthquake

On 5 April 2024, 10:23 a.m. local time, a moment magnitude 4.8 earthquake struck Tewksbury Township, New Jersey, about 65 km west of New York City. Millions of people from Virginia to Maine and beyond felt the ground shaking, resulting in the largest number (>180,000) of U.S. Geological Survey (USGS) “Did You Feel It?” reports of any earthquake. A team deployed by the Geotechnical Extreme Events Reconnaissance Association and the National Institute of Standards and Technology documented structural and nonstructural damage, including substantial damage to a historic masonry building in Lebanon, New Jersey. The USGS National Earthquake Information Center reported a focal depth of about 5 km, consistent with a lack of signal in Interferometric Synthetic Aperture Radar data. The focal mechanism solution is strike slip with a substantial thrust component. Neither mechanism’s nodal plane is parallel to the primary northeast trend of geologic discontinuities and mapped faults in the region, including the Ramapo fault. However, many of the relocated aftershocks, for which locations were augmented by temporary seismic deployments, form a cluster that parallels the general northeast trend of the faults. The aftershocks lie near the Tewksbury fault, north of the Ramapo fault.

New Jersey

Stepovers and beyond: Structural control of The Geysers geothermal system and the broader Clear Lake region

Fault geometry exerts a first-order control on geothermal systems by governing stress localization, fracture development, and permeability, yet in complex fault networks or broader shear zones, the relative influence of individual geometric features is often difficult to resolve. In the northern California Coast Ranges, The Geysers geothermal field is commonly interpreted to occur within a releasing stepover, although no single, clearly defined stepover is identified in published studies. To investigate the structural controls on The Geysers and the broader Clear Lake region, a two-dimensional elastic boundary element model is developed to evaluate spatial patterns of dilational strain associated with progressively more complete fault geometries. Model results show that dilation in the region is not controlled by a single structure but instead reflects the combined effects of multiple interacting fault elements. Three primary controls are identified: (1) opposing bends in the regional strike-slip fault system, including a releasing bend along the Maacama fault; (2) the southern fault tip of the Collayomi fault, which generates a prominent dilational lobe beneath the southern Geysers; and (3) a releasing stepover between the Collayomi fault and the Geyser Peak–Mercuryville–Big Sulphur Creek fault system, inferred to collectively behave as a right-lateral shear zone bounding the western margin of The Geysers. Predicted dilational strain magnitudes are sufficient to localize permeability between faults. These results highlight that incorporating complete fault networks and bedrock geological mapping can enhance geothermal assessments and provide a transferable framework for evaluating structurally controlled permeability in tectonically active regions.

California

Simulated mean monthly groundwater-transported nitrogen loads in watersheds on the north shore of Long Island Sound, 1993–2022

Elevated nitrogen loads are pervasive in the Long Island Sound, an estuary that receives freshwater and nutrients from both surface-water and groundwater discharge. Surface-water nitrogen loads to the Long Island Sound are relatively well characterized, but less is known about groundwater-transported nitrogen loads. Prior work on the northern shore of Long Island Sound (Connecticut and areas of New York and Rhode Island) suggested that groundwater travel times are relatively short (median less than 2 years) and that decade-long nutrient legacies are not widespread. Because the travel times are short, groundwater flow and nutrient loads likely vary substantially between months. In the current study, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency’s Long Island Sound Study and the Connecticut Department of Energy and Environmental Protection, developed a set of models to better characterize spatial and temporal patterns of groundwater-transported nitrogen loading from atmospheric deposition, septic systems, and fertilizers within the study area. The models provide an estimate, with uncertainty, of groundwater-transported nitrogen loads in the study area, filling a key gap in the nitrogen budget for Long Island Sound. The models also highlight the spatial and temporal variation in nitrogen loading throughout the study area. The modeling workflow involved four models. (1) A soil-water-balance model was developed by using the Soil-Water-Balance software to simulate groundwater recharge across the study area for water years 2005 through 2022. The simulated mean monthly recharge from the soil-water-balance model was used as input into a groundwater-flow model. (2) The groundwater-flow model was developed by using the MODFLOW 6 software and data for water years 1993 through 2022 and simulates average monthly hydrologic conditions. The groundwater-flow model was calibrated by using the Iterative Ensemble Smoother method within the PEST++ software. The Iterative Ensemble Smoother method generates an ensemble of sets of parameter values, with each set producing reasonable simulated hydrologic parameter values. (3) An ensemble of MODPATH particle-tracking simulations were run to generate particle flow paths and travel times, with each simulation using a different set of the flow model parameters. (4) A nitrogen load model uses the MODPATH simulation outputs to track nitrogen from the land surface through multiple attenuation zones until it discharges into fresh or saline surface water. As with the groundwater-flow model, the nitrogen model simulated average monthly groundwater-transported nitrogen loads for water years 1993 through 2022. One novel aspect of the nitrogen load model is that the nitrogen attenuation parameters were calibrated to observed nitrogen loads. Across the ensemble of simulated nitrogen loads, the median study-area-wide monthly simulated nitrogen loads from the aquifer to Long Island Sound throughout the year ranged from 900 to 18,600 kilograms of nitrogen per day, with a median load of 5,100 kilograms of nitrogen per day. The simulated loads were based on average monthly conditions for water years 1993 through 2022. Loads were highest during the winter and early spring and lowest during the late summer. However, simulated travel times for groundwater and nitrogen loads discharged to Long Island Sound during summer were longer than travel times for groundwater and loads discharged during the winter, indicating that, on average, groundwater discharged during summer traveled along different, and longer, flow paths, than groundwater discharged during winter. This indicates that summer loads would respond more slowly to changes in nitrogen inputs at the water table than winter loads. Over the entire study area, approximately 15 percent of the simulated load is from atmospheric deposition sources, 30 to 40 percent is from fertilizer, and 50 to 60 percent is from septic systems. The final analysis of the study involved simulating the change in groundwater-transported nitrogen load in response to upgrading septic systems or reducing fertilizing inputs to areas of turf grass. Both management interventions reduced the groundwater-transported nitrogen load, and reductions were greater in areas with greater loads from septic systems or turf-grass fertilizers. The delay between management actions and substantial reductions in groundwater-transported nitrogen loads varied seasonally; loads during the late summer months remained elevated longer than the winter loads.

Connecticut, Rhode Island

Global performance of remote sensing-based and reanalysis-driven models to estimate open water evaporation

Evaporation plays an essential role in the water cycle, influencing local and regional climates while directly impacting water availability in lakes. However, directly measuring evaporation over water bodies remains challenging due to the high costs of installing and maintaining the required in situ instrumentation. Although several remote sensing algorithms have been providing evaporation estimates, the lack of a global validation hinders our understanding of their relative uncertainties and performances across different regions. Here, we analyze the performance of a suite of models that leverage satellite data and meteorological reanalysis to estimate evaporation over lakes worldwide. We compare 3 remote sensing-based models, 1 reanalysis-driven model and 1 ensemble approach, using in situ observations from 27 lakes representing a diverse range of geographic and climatic regions. Our results demonstrate that, overall, the ensemble outperformed any individual model in terms of accuracy, with a RMSE and a bias of 1.3 and 0.3 mm day −1 , respectively. These findings highlight the benefits of using an ensemble approach to estimate open water evaporation with satellite-based models at the global scale, leveraging the unique strengths of each model. For the individual models, differences in the representation of heat storage changes and advection effects led to lower values of RMSE and bias, depending on the location and depth of the lakes. This study sets the path for future improvement of open water evaporation algorithms globally, while remote sensing techniques are proven satisfactory to monitoring of water loss in lakes globally, an essential step toward effective large-scale water resources management.

Water Resources Research

Critical review of mercury methylation and methylmercury demethylation rate constants in aquatic sediments for biogeochemical modeling

Mercury is a toxin that causes neurological impairments in adults, is particularly harmful for fetuses and children, and is deadly in severe cases, making it a worldwide health concern. Methylmercury (MeHg) is the environmentally relevant form of mercury (Hg) because it biomagnifies along the food chain. Methylmercury is mainly produced in aquatic sediments via methylation of inorganic Hg (Hg(II)) and transformed back via demethylation. Because transformation rates determine MeHg concentrations, quantification of methylation and demethylation rates is needed to inform management of MeHg. Published rate constants for Hg(II) methylation ( 𝑘 𝑚 ) and MeHg demethylation ( 𝑘 𝑑 ) vary greatly, stemming partly from differences in experimental methods. We conducted a comprehensive review of rate laws, evaluated published rate constants, and performed biogeochemical simulations to assess variability in reported 𝑘 𝑚 and 𝑘 𝑑 . Based on selected studies employing the same pseudo-first-order rate law and similar experimental methods, we found that 𝑘 𝑚 = 0.04 ± 0.03 d −1 is a reasonable range for wetland sediments. Over a number of environments, maximum 𝑘 𝑑 was smaller at sites without Hg source ( 𝑘 𝑑 = 0.5 d −1 ) than at sites with identified Hg source ( 𝑘 𝑑 = 1.8 d −1 ). Larger variability and higher uncertainty in 𝑘 𝑑 compared to 𝑘 𝑚 highlight the need for more research on MeHg demethylation rates. This critical review: (a) aids the design of future experimental studies of 𝑘 𝑚 and 𝑘 𝑑 ; (b) provides guidance for comparing rate constants from different studies; (c) presents a biogeochemical reaction model to assess rate constants; and (d) informs selection of 𝑘 𝑚 and 𝑘 𝑑 values from the literature for use in model simulations.

Critical Reviews in Environmental Science and Tech

Core microbiomes as a potential fingerprinting method of Western USA dust sources

Introduction: Changing frequency and intensity of dust emissions impacts ecosystems and human health. Dust carries microbes, nutrients, heavy metals, and other materials that may change environmental biogeochemistry at deposition sites. Identifying dust sources provides key information on where and when mitigation strategies should be employed. However, commonly used geochemical or isotopic tracers are often not capable of distinguishing between geographic regions. Methods: We explored whether soil bacterial communities may provide distinct fingerprints of dust sources in the western United States. We identified bacterial core communities of dust from ten locations monitored by the National Wind Erosion Research Network (NWERN) with varied land use (cropland, rangeland, and playa), and compared communities to location, soil, and regional characteristics. Samples were collected monthly from Modified Wilson and Cooke (MWAC) samplers, composited by season (spring, summer, and fall), and analyzed using 16S rRNA sequencing. Results: We found distinct bacterial core communities that reflected dust source characteristics. In order of importance, precipitation levels ( p = 0.0001), location ( p = 0.0001), soil texture ( p = 0.0001), seasonality ( p = 0.0001), and elevation (p = 0.0002) were correlated with bacterial community composition. Discussion: Distinct bacterial core communities were associated with site characteristics such as biocrusts, playas, and military base proximity. Our results suggest that the use of core microbiomes may offer a fingerprinting method to identify dust source regions.

Colorado, Nevada, New Mexico, North Dakota, Oklaho

Baseflow and snowmelt sustained streamflow in the Upper Colorado River Basin, 1986-2020

The Upper Colorado River Basin (UCRB) faces substantial water availability limitations. Although most streamflow originates as snowmelt, the partitioning of snowmelt between surface runoff and groundwater recharge and subsequent groundwater discharge to streams is highly uncertain. On average, over half of the streamflow in the UCRB is estimated to originate from groundwater discharge to streams, highlighting the importance of baseflow in sustaining surface water. However, the historical patterns of baseflow and streamflow, along with their variability over space and time and their specific sources, remain unknown at the basin scale. This study addresses those gaps by characterizing the sources and transport pathways of both baseflow and streamflow in the UCRB at a seasonal timestep from 1986 to 2020, including the lagged delivery of subsurface water to streams beyond the current season, using coupled models of baseflow and streamflow. Between 1986 and 2020, on average 63% of UCRB streamflow originated from baseflow. About half of this baseflow took longer than one season to reach streams, and outside the snowmelt season, baseflow was the dominant source of streamflow. Snowmelt was a key source of both baseflow and streamflow. Current season snowmelt contributed 33% of streamflow via runoff, and 22% of the 29% of streamflow that originated as current season baseflow via subsurface flow to streams. Over the study period, baseflow index (BFI) declined in headwaters and increased at mid-elevations. Springtime increases in BFI demonstrate the increasingly important role baseflow plays in water supply. Identifying the sources, locations, and timing of water that contributed to the UCRB outlet can inform management of water resources in the basin.

Arizona, Colorado, New Mexico, Utah, Wyoming

Geospatial PDF map of the compilation of GIS data for the mineral industries and related infrastructure of Africa

Introduction In 2021, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries and related infrastructure of Africa." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of the African region and expand the NMIC's understanding on the impact of mineral industry of African nations in the global economy. The African region, which comprises the independent nations that make up the African continent and its associated islands and dependencies, consists of a total of 58 mineral producing countries. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and development capacity across Africa along with the related infrastructure capable of supporting current (for the reference year 2018) and future extractive industry operations in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries and Related Infrastructure of Africa." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry and related infrastructure GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within Africa.

Open-File Report

U.S.-Mexico Borderland & vegetation community map

People on both sides of the United States-Mexico border need a high-resolution, binational vegetation community map that spans the entire United States-Mexico borderlands. Traditionally, mapping efforts in this region were impeded by complex logistics related to the international border, differing national needs and plans, and resource allocations and priorities. To address this need, scientists from the U.S. Geological Survey (USGS) Southwest Biological Science Center partnered with the Sonoran Joint Venture, the U.S. Fish and Wildlife Service (FWS) Migratory Bird Program, data engineers from the Department of Biosystems Engineering at the University of Arizona, and collaborators from the Wildlands Network, the Borderlands Program to produce the first prototype land cover map within the overlapping Mojave Desert, Sonoran Desert, and the North American Bird Conservation Initiative’s Bird Conservation Region 33 (BCR33) using Landsat satellite data . BCR33 is an area of high biodiversity, providing habitat for bird species of concern and other wildlife. The land cover map supports FWS recovery plan efforts related to conservation planning activities for many species, including Yellow-billed Cuckoo ( Coccyzus americanus ), Cactus Ferruginous Pygmy-Owl ( Glaucidium brasilianum cactorum ), Southwestern Willow Flycatcher ( Empidonax traillii extimus ), Yuma Ridgway’s Rail ( Rallus obsoletus yumanensis ), Bendire’s thrasher ( Toxostoma bendirei ), LeConte’s thrasher ( Toxostoma lecontei ), Masked Bobwhite ( Colinus virginianus ridgwayi ), jaguar ( Panthera onca ), and endangered plants such as Bartram’s stonecrop ( Graptopetalum bartramii ) and the Pima pineapple cactus ( Coryphantha robustispina ssp. robustispina ). In 2024, a Phase-II map for the full BCR33 region was completed, increasing the understanding of the binational nature of natural communities. The published map and associated paper can be found here .

Borderland

Corundum discovered by SuperCam and the Perseverance rover at Jezero crater, Mars

Mars is primarily composed of mafic mineral assemblages and their alteration products, but small, scattered rocks strewn across the landscape offer clues to greater petrological diversity. While traversing the Jezero crater rim, the Perseverance rover encountered several plagioclase-rich light-toned float rocks. SuperCam identified the distinctive signature of corundum (α-Al 2 O 3 ) in these rocks using time-resolved luminescence spectroscopy. Two strong peaks (692.7 and 694.1 nm) with millisecond lifetimes, and additional supporting lines, are consistent with Cr 3+ substitution for Al 3+ in corundum. Corundum forms in Al-rich, Si-depleted environments through magmatic or metamorphic processes. Given the rocks' small size, association with plagioclase, and location on the crater rim, we interpret the most plausible formation scenario to be impact induced metamorphism at the interface of a felsic and a mafic/ultramafic member with the likely action of fluids at some stage, although other possibilities are not excluded.

Geophysical Research Letters

Moment magnitude for small earthquakes in the Delaware basin of west Texas and southeast New Mexico, USA

The Delaware Basin region of west Texas and southeast New Mexico has become one of the most prolific regions of seismic activity in the continental United States due to widespread hydraulic fracturing and wastewater disposal injection. In response to the increased number of earthquakes in this region, rapid and accurate characterization of earthquake sources is necessary to understand the evolution of seismic activity and level of seismic hazard associated with these earthquakes. This study re-evaluates earthquake magnitudes, estimating moment magnitude (MW) for small earthquakes in the Delaware Basin using 1) moment-rate spectra derived from S-wave coda envelopes, and 2) a relative magnitude method that relies exclusively on the ratio of waveform amplitudes between highly correlated waveform pairs. The coda-envelope method produces accurate M W estimates for small earthquakes ( M 1.5 – 3) that are consistent with independent, waveform modeled moment magnitudes for events with M W > 3 . Using the relative amplitudes method to extend these M W magnitudes to many other events, we successfully provide relative moment magnitude ( M W,rel ) values for 81% of the Texas Seismological Network catalog in the Delaware Basin region, and 45% of the USGS Induced Seismicity Project’s catalog of events in southeast New Mexico. The adoption and integration of the calibrated M W,rel method with current magnitude estimation methods offers valuable insights into the relationships between local and moment magnitude and will contribute to improved characterization of widespread induced seismicity.

New Mexico, Texas

Approximate inland extent of saltwater intrusion at the base of the Biscayne aquifer, Miami-Dade County, Florida, 2022

Miami-Dade County is part of a densely populated urban corridor in southeastern Florida. The Biscayne aquifer serves as Miami-Dade County’s primary drinking water source and is characterized by highly permeable karstic limestone and carbonate sand. The aquifer’s coastal location and permeable nature make it susceptible to saltwater intrusion. Monitoring the current inland extent and the rate of movement of the saltwater front in the aquifer can inform management strategies for conserving the long-term sustainability of the county’s water supply. In the 1950s, the U.S. Geological Survey published a map of the inland extent of saltwater intrusion in the Biscayne aquifer and has continued to update this map to monitor changes over time, with the most recent update published in 2018. An updated map has been created showing the approximate inland extent of saltwater intrusion in the Biscayne aquifer in eastern Miami-Dade County in 2022, with the 2018 extent shown for comparison. The inland extent of saltwater intrusion was mapped through the interpretation of borehole electromagnetic induction logs and measurements of chloride and specific conductance in groundwater samples. The location of the saltwater interface at the base of the Biscayne aquifer was represented by the 1,000-milligram-per-liter isochlor. This report describes changes in the location of the saltwater interface from 2018 to 2022. By 2022, the saltwater interface had moved farther inland in both the northern and southern parts of the county, advancing by as much as 0.3 kilometer in the north and up to 0.8 kilometer in the Model Land Area to the south. However, it remained relatively unchanged from its 2018 position in the east-central part of the county.

Florida

Factors contributing to pesticide contamination in riverine systems: The role of wastewater and landscape sources

Wastewater treatment plant (WWTP) discharges can be a source of organic contaminants, including pesticides, to rivers. An integrated model was developed for the Potomac River watershed (PRW) to determine the amount of accumulated wastewater percentage of streamflow (ACCWW) and calculate predicted environmental concentrations (PECs) for 14 pesticides in non-tidal National Hydrography Dataset Plus Version 2.1 stream segments. Predicted environmental concentrations were compared to measured environmental concentrations (MECs) from 32 stream sites that represented a range of ACCWW and land use to evaluate model performance and to assess possible non-WWTP loading sources. Statistical agreement between PECs and MECs was strongest for insecticides, followed by fungicides and herbicides. Principal component analysis utilizing optical fluorescence and ancillary water quality data identified wastewater and urban runoff sources. Pesticides that indicated relatively larger sources from WWTPs included dinotefuran, fipronil, carbendazim, thiabendazole, and prometon whereas imidacloprid, azoxystrobin, propiconazole, tebuconazole, and diuron were more related to urban runoff. In addition, PECs generally comprised a low proportion of MECs, which indicates possible dominant loading sources beyond WWTP discharges. Cumulative potential toxicity was higher for sites with greater ACCWW and/or located in developed areas. Imidacloprid, fipronil, and carbendazim accounted for the largest portion of predicted potential toxicity across sites. The chronic aquatic life toxicity benchmarks for freshwater invertebrates were exceeded for 82 % of the imidacloprid detections ( n = 28) and 47 % of the fipronil detections ( n = 19). These results highlight the ecological implications of pesticide contamination from WWTP discharges and also the potential legacy effects from accumulated soil and groundwater sources. Pesticide management strategies that mitigate both current and historical impacts may improve the health of aquatic ecosystems.

Potomac River watershed

Water-quality assessment of south-central Texas: Occurrence and distribution of volatile organic compounds in surface water and ground water, 1983-94, and implications for future monitoring

The study area of the South-Central Texas study unit of the National Water-Quality Assessment Program comprises the Edwards aquifer in the San Antonio region and its catchment area. The first phase of the assessment includes evaluation of existing water-quality data for surface water and ground water, including volatile organic compounds, to determine the scope of planned monitoring. Most analyses of volatile organic compounds in surface water are from the National Pollutant Discharge Elimination System sites in San Antonio, Texas. Nine volatile organic compounds were detected at the six sites. The three compounds with the most detections at National Pollutant Discharge Elimination System sites are 1,2,4-trimethylbenzene, toluene, and xylene. Analysis of volatile organic compounds in ground water was limited to Edwards aquifer wells. Twenty-eight volatile organic compounds were detected in samples from 89 wells. The five most commonly detected compounds in samples from wells, in descending order, are tetrachloroethene, trichloroethene, bromoform, chloroform, and dibromochloromethane. Detections of volatile organic compounds in surface water and ground water within the South-Central Texas study area are limited to site-specific sources associated with development; therefore, planned monitoring for possible detections of volatile organic compounds as part of the National Water-Quality Assessment Program will emphasize areas of expanding population and development. Monitoring of volatile organic compounds is planned at National Pollutant Discharge Elimination System sites, at basic fixed surface-water sites, and in the ground-water study-unit surveys.

Texas

Birds, breakpoints, and baselines: How citizen science data can reveal ecological boundaries in Kenya’s Upper Tana watershed

Tropical watersheds are increasingly threatened by climate change, land-use conversion, and resource extraction, yet conventional biodiversity monitoring in these systems is often spatially and temporally limited. Citizen science offers a complementary approach, enabling biodiversity data collection over large areas that can supplement professional scientific surveys. We analyzed 10 years (2012–2022) of Upper Tana Watershed bird data from the Kenya Bird Map project, covering 114 pentads (9 × 9 km) within a 17,000 km 2 watershed to assess patterns of bird community composition and distribution across this watershed and to also evaluate the effects of environmental variables, seasonality, and sampling effort to help inform improvements in future citizen science projects. Citizen (or community) scientists recorded 575 species (>50% of Kenya’s total avifauna) in 74 families. Asymptotic species accumulation indicates that most probable species present in the watershed were detected. Threshold indicator taxa analysis revealed distinct ecological boundaries along elevation (∼1,500 m), precipitation (∼1,100 mm), and mean temperature (∼19°C) gradients, corresponding to a turnover from xeric savanna to mesic montane forest assemblages. Notably, bird communities showed little seasonal differentiation between wet and dry periods, consistent with dominance by resident year-round species. Data limitations including uneven survey distribution and frequency, absence of abundance metrics, and coarse representation of local environmental conditions that likely reduced our ability to detect fine-scale species–habitat relationships. Addressing these gaps through spatially balanced sampling at greater resolution, greater survey frequency in underrepresented areas, and improved capture of habitat metrics could strengthen the use of citizen-science bird data for watershed bioassessment. Our findings demonstrate that structured citizen-science initiatives can identify ecological boundaries and inform adaptive management of tropical socio-ecological systems under rapid environmental change.

Upper Tana watershed

Seismic velocity changes from repetitive seismicity at Mauna Loa prior to and during its 2022 eruption

Mauna Loa’s short-lived eruption from late November to early December 2022 marked the culmination of nearly a decade of elevated seismic activity and geodetic inflation. The volcano has been monitored by a network of permanent, short period and broadband seismometers. I used the continuous waveform data from that network starting in 2012 to generate a catalog of seismicity that enhances the US Geological Survey Hawaiian Volcano Observatory’s public seismic catalog with four times the number of earthquakes, which were then grouped by waveform similarity. Analysis of subtle delays in the timing of arrivals of scattered waves between pairs of earthquakes in this catalog yields a history of small changes in the shallow seismic velocity structure of the volcano. Seismic velocities have been shown at other volcanoes to change during unrest and eruption. My results show a decrease in seismic velocity centered on the summit beginning in September 2022, corresponding to the onset of a vigorous precursory swarm of seismic activity and shallow inflation. During the eruption itself, I observe large changes due likely to dike opening along the northeast rift zone and deflation of the summit reservoir. However, seismic velocity changes associated with non-volcanic sources such as ground shaking from large earthquakes and meteorological influences at seasonal and diurnal time scales are also observed, and these dominate the velocity changes prior to the eruption. Proper accounting of these effects will be a requirement for use in real-time monitoring, and this work serves as a starting point in that endeavor for Mauna Loa.

Hawaii

Earthquake rupture arrest from depth‐dependent frictional stability on the Pütürge segment of the East Anatolian Fault Zone, Türkiye (Turkey)

Determining why earthquake ruptures stop is a central challenge in earthquake science and seismic hazard assessment. The Pütürge segment of the East Anatolian Fault Zone, Türkiye, exhibits shallow creep (<∼3 km depth) yet hosts M > 6.5 earthquake ruptures at greater depth. Here, we evaluate whether variations in frictional stability along this segment aided arrest of the 2020 M 6.7 Elaziğ and 2023 M 7.8 Pazarcık earthquake ruptures. Analysis of Sentinel‐1 Synthetic Aperture Radar imagery indicates the 2023 M 7.8 rupture propagated laterally into a metamorphic massif within the Pütürge segment, where slip rapidly decayed below detection limits. Creepmeters along this segment recorded no significant surface afterslip (<3 mm) in the following year. To investigate this fault‐slip behavior, we conducted triaxial friction experiments on Pütürge fault gouge sampled from an outcrop exposure. The gouge, composed primarily of muscovite, quartz, and calcite, is velocity strengthening at conditions approximating 0–2.5 km depth and velocity weakening at 4–5 km depth. This transition to velocity‐weakening friction is associated with enhanced comminution and shear localization observed microstructurally. Our results suggest that depth‐dependent frictional stability of the Pütürge fault segment facilitates rupture nucleation and propagation at depth while maintaining rupture‐arresting behavior near Earth’s surface.

Pütürge segment of the East Anatolian Fault Zone

Geologic framework and Holocene sand thickness offshore of Seven Mile Island, New Jersey

The U.S. Geological Survey assessed the Quaternary evolution of Seven Mile Island, New Jersey, to quantify coastal sediment availability, which is crucial for establishing sediment budgets, understanding sediment dispersal, and managing coastlines. This report presents preliminary interpretations of seismic profiles, maps of Holocene sand thickness from the shoreline to 2 kilometers offshore, and tables quantifying the volume of available sediment along the coastal margin based on data collected during 2021 and 2022. The results reveal spatial variability in the thickness and cross-shore extent of Holocene sand. The study area was separated into northern, central, and southern zones by using underlying stratigraphy and geomorphic features. The characteristics and spatial extent of the Holocene sand deposit indicate that hydrodynamic processes contribute to its spatial variability. Northern Seven Mile Island contains the thickest deposits of Holocene sand that were formed by sediment bypass around the Townsends Inlet ebb-tidal delta. Specifically, swash bars have welded to the updrift end of Seven Mile Island and have formed thick deposits of Holocene sand that thicken landward and taper seaward. Despite their thickness, these deposits have the smallest cross-shore extent; therefore, northern Seven Mile Island has the smallest volume of Holocene sand of the three geomorphic zones. Central Seven Mile Island has the thinnest Holocene sand deposits because this section of the barrier island is outside the influence of ebb-tidal deltas. Southern Seven Mile Island has the greatest volumes of Holocene sand because of increased accommodation and deposition adjacent to the Hereford Inlet ebb-tidal delta. Even though tidal inlets exert variable influence on the three geomorphic zones, sediment is distributed fairly uniformly within each geomorphic zone; each of the three zones contains 31.05–36.48 percent of the volume of available Holocene sand.

New Jersey