SEARCH · USGS Science

Results for “Journal of Maps”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

USGS2011

Hydrologic conditions and terrestrial laser scanning of post-firedebris flows in the San Gabriel Mountains, CA, U.S.A

To investigate rainfall-runoff conditions that generate post-wildfire debris flows, we instrumented and surveyed steep, small watersheds along the tectonically active front of the San Gabriel Mountains, California. Fortuitously, we recorded runoff-generated debris-flows triggered by one spatially restricted convective event with 28 mm of rainfall falling over 62 minutes. Our rain gages, nested hillslope overland-flow sensors and soil-moisture probes, as well as a time series of terrestrial laser scanning (TLS) revealed the effects of the storm. Hillslope overland-flow response, along two ~10-m long flow lines perpendicular to and originating from a drainage divide, displayed only a 10 to 20 minute delay from the onset of rainfall with accumulated totals of merely 5-10 mm. Depth-stratified soil-moisture probes displayed a greater time delay, roughly 20- 30 minutes, indicating that initial overland flow was Hortonian. Furthermore, a downstream channel-monitoring array recorded a pronounced discharge peak generated by the passage of a debris flow after 18 minutes of rainfall. At this time, only four of the eleven hillslope overland flow sensors confirmed the presence of surface-water flow. Repeat TLS and detailed field mapping using GPS document how patterns of rainsplash, overland-flow scour, and rilling contributed to the generation of metter-scale debris flows. In response to a single small storm, the debris flows deposited irregular levees and lobate terminal snouts on hillslopes and caused wide- spread erosion of the valley axis with ground surface lowering exceeding 1.5 m.

California↗

USGS2018

Stream piracy in the Black Hills: A geomorphology lab exercise

The Black Hills of South Dakota exhibits many fine examples of stream piracy that are very suitable for teaching geomorphology lab exercises. This lab goes beyond standard topographic map interpretation by using geologic maps, well logs, gravel provenance and other types of data to teach students about stream piracy. Using a step-by-step method in which the lab exercises ramp up in difficulty, students hone their skills in deductive reasoning and data assimilation. The first exercises deal with the identification of stream piracy at a variety of spatial scales and the lab culminates with an exercise on landscape evolution and drainage rearrangement.

South Dakota↗

USGS2001

U.S. Geological Survey programs and investigations related to soil and water conservation

The U.S. Geological Survey has a rich tradition of collecting hydrologic data, especially for fluxes of water and suspended sediment, that provide a foundation for studies of soil and water conservation. Applied and basic research has included investigations of the effects of land use on rangelands, croplands, and forests; hazards mapping; derivation of flood and drought frequency, and other statistics related to streamflow and reservoir storage; development and application of models of rainfall-runoff relations, chemical quality, and sediment movement; and studies of the interactive processes of overland and channel flow with vegetation. Networks of streamgaging stations and (or) sampling sites within numerous drainage basins are yielding information that extends databases and enhances the ability to use those data for interpretive studies.

International Journal of Sediment Research↗

USGS2011

A comparison of turtle sampling methods in a small lake in Standing Stone State Park, Overton County, Tennessee

We used basking traps and hoop nets to sample turtles in Standing Stone Lake at 2-week intervals from May to November 2006. In alternate weeks, we conducted visual basking surveys. We collected and observed four species of turtles: spiny softshell (Apalone spinifera), northern map turtle (Graptemys geographica), pond slider (Trachernys scripta), and snapping turtle (Chelydra serpentina). Relative abundances varied greatly among sampling methods. To varying degrees, all methods were species selective. Population estimates from mark and recaptures of three species, basking counts, and hoop net catches indicated that pond sliders were the most abundant species, but northern map turtles were 8Ã— more abundant than pond sliders in basking trap catches. We saw relatively few snapping turtles basking even though population estimates indicated they were the second most abundant species. Populations of all species were dominated by adult individuals. Sex ratios of three species differed significantly from 1:1. Visual surveys were the most efficient method for determining the presence of species, but capture methods were necessary to obtain size and sex data.

Tennessee↗

USGS2007

Comparative lahar hazard mapping at Volcan Citlaltépetl, Mexico using SRTM, ASTER and DTED-1 digital topographic data

In this study, we evaluated and compared the utility of spaceborne SRTM and ASTER DEMs with baseline DTED-1 “bald-earth” topography for mapping lahar inundation hazards from volcan Citlaltépetl, Mexico, a volcano which has had a history of producing debris flows of various extents. In particular, we tested the utility of these topographic datasets for resolving ancient valley-filling deposits exposed around the flanks of the volcano, for determining their magnitude using paleohydrologic methods and for forecasting their inundation limits in the future. We also use the three datasets as inputs to a GIS stream inundation flow model, LAHARZ, and compare the results. In general all three datasets, with spatial resolution of 90 m or better, were capable of resolving debris flow and lahar deposits at least 3 × 10 6 m 3 in volume or larger. Canopy- and slope-related height errors in the ASTER and SRTM DEMs limit their utility for measuring valley-filling cross-sectional area and deriving flow magnitude for the smallest deposits using a cross-sectional area to volume scaling equation. Height errors in the ASTER and SRTM DEMs also causes problems in resolving stream valley hydrography which controls lahar flow paths and stream valley morphology which controls lahar filling capacity. However, both of the two spaceborne DEM datasets are better than DTED-1 at resolving fine details in stream hydrography and erosional morphologies of volcaniclastics preserved in the valleys around the more humid, eastern flanks of the volcanic range. The results of LAHARZ flow inundation modeling using all three DEMs as inputs are remarkably similar and co-validate one another. For example, at Citlaltépetl all lahar simulations show that the city of Orizaba is the most vulnerable to flows similar in magnitude to, or larger than, one that occurred in 1920. Many of the other cities and towns illustrated are built higher up on terrace deposits of older debris flows, and are safe from all but the largest flows, which occur less frequently. Finally, ASTERs 60 km swath width and 8% duty cycle presents a challenge for mapping lahar inundation hazards at E–W oriented stream valleys in low-latitude areas with persistent cloud cover. However, its continued operations enhances its utility as a means for updating the continuous but one-time coverage of SRTM, and for filling voids in the SRTM dataset such as those that occur along steep-sided valleys prone to hazards from future lahars.

Journal of Volcanology and Geothermal Research↗

USGS2003

Imaging spectroscopy: Earth and planetary remote sensing with the USGS Tetracorder and expert systems

Imaging spectroscopy is a tool that can be used to spectrally identify and spatially map materials based on their specific chemical bonds. Spectroscopic analysis requires significantly more sophistication than has been employed in conventional broadband remote sensing analysis. We describe a new system that is effective at material identification and mapping: a set of algorithms within an expert system decision‐making framework that we call Tetracorder. The expertise in the system has been derived from scientific knowledge of spectral identification. The expert system rules are implemented in a decision tree where multiple algorithms are applied to spectral analysis, additional expert rules and algorithms can be applied based on initial results, and more decisions are made until spectral analysis is complete. Because certain spectral features are indicative of specific chemical bonds in materials, the system can accurately identify and map those materials. In this paper we describe the framework of the decision making process used for spectral identification, describe specific spectral feature analysis algorithms, and give examples of what analyses and types of maps are possible with imaging spectroscopy data. We also present the expert system rules that describe which diagnostic spectral features are used in the decision making process for a set of spectra of minerals and other common materials. We demonstrate the applications of Tetracorder to identify and map surface minerals, to detect sources of acid rock drainage, and to map vegetation species, ice, melting snow, water, and water pollution, all with one set of expert system rules. Mineral mapping can aid in geologic mapping and fault detection and can provide a better understanding of weathering, mineralization, hydrothermal alteration, and other geologic processes. Environmental site assessment, such as mapping source areas of acid mine drainage, has resulted in the acceleration of site cleanup, saving millions of dollars and years in cleanup time. Imaging spectroscopy data and Tetracorder analysis can be used to study both terrestrial and planetary science problems. Imaging spectroscopy can be used to probe planetary systems, including their atmospheres, oceans, and land surfaces.

Journal of Geophysical Research E: Planets↗

USGS2021

Past, present, and future of Mars Polar Science: Outcomes and outlook from the 7th International Conference on Mars Polar Science and Exploration

Mars Polar Science is a subfield of Mars science that encompasses all studies of the cryosphere of Mars and its interaction with the Martian environment. Every 4 yr, the community of scientists dedicated to this subfield meets to discuss new findings and debate open issues in the International Conference on Mars Polar Science and Exploration (ICMPSE). This paper summarizes the proceedings of the seventh ICMPSE and the progress made since the sixth edition. We highlight the most important advances and present the most salient open questions in the field today, as discussed and agreed upon by the participants of the conference. We also feature agreed-upon suggestions for future methods, measurements, instruments, and missions that would be essential to answering the main open questions presented. This work is thus an overview of the current status of Mars Polar Science and is intended to serve as a road map for the direction of the field during the next 4 yr and beyond, helping to shape its contribution within the larger context of planetary science and exploration.

The Planetary Science Journal↗

USGS1973

Petrography and structural relations of granitic basement rocks in the Monterey Bay area, California

In the past, the granitic basement of the Coast Ranges has been thought to be dominantly quartz diorite and low in K-feldspar. However, a study of outcrops around Monterey Bay, basement well samples, and dredge samples from Monterey Bay shows that the granitic basement averages about 15 to 20 percent K-feldspar. Therefore, as a sedimentary provenance, the basement around Monterey Bay could have contributed abundant K-feldspar to the Cenozoic sedimentary deposits of the region; that is, in the Monterey Bay area the local basement is an adequate source for the abundant K-feldspar in the sedimentary units. The distribution of basement rocks and mapped faults, coupled with gravity-geophysical data, suggests that the area between the San Andreas and Sur-Nacimiento fault zones (the Salinian block) near Monterey Bay is broken into several discrete structural blocks. Some of these blocks juxtapose not only different basement rocks, but also different contour patterns on the buried basement surface. These features suggest large strike-slip movements along some faults within the Salinian block in the Monterey Bay area.

California↗

USGS2013

Injection, transport, and deposition of tephra during event 5 at Redoubt Volcano, 23 March, 2009

Among the events of the 2009 eruption at Redoubt Volcano, Alaska, event 5 was the best documented by radar, satellite imagery, and deposit mapping. We use the new Eulerian tephra transport model Ash3d to simulate transport and deposition of event 5 tephra at distances up to 350 km. The eruption, which started at about 1230 UTC on 23 March, 2009, sent a plume from the vent elevation (estimated at 2.3 ± 0.1 km above sea level or a.s.l.) to about 16 ± 2 km above sea level in 5 min. The plume was a few kilometers higher than would be expected for the estimated average mass eruption rate and atmospheric conditions, possibly due to release of most of the eruptive mass in the first half of the 20-minute event. The eruption injected tephra into a wind field of high shear, with weak easterly winds below ~ 3 km elevation, strong southerly winds at 6–10 km and weak westerlies above ~ 16 km. Model simulations in this wind field predicted development of a northward-migrating inverted “v”-shaped cloud with a southwest-trending arm at a few kilometers elevation, which was not visible in IR satellite images due to cloud cover, and a southeast-trending arm at > 10 km elevation that was clearly visible. Simulations also predicted a deposit distribution that strongly depended on plume height: a plume height below 15 km predicted ash deposits that were located west of those mapped, whereas good agreement was reached with a modeled plume height of 15–18 km. Field sampling of the deposit found it to contain abundant tephra aggregates, which accelerated the removal of tephra from the atmosphere. We were able to reasonably approximate the effect of aggregation on the deposit mass distribution by two methods: (1) adjusting the grain-size distribution, taking the erupted mass < = 0.063 mm in diameter and distributing it evenly into bins of coarser size; and (2) moving 80–90% of the mass < = 0.063 mm into a single particle bin ranging in size from 0.25 to 1 mm. These methods produced an area inside the 100 g m − 2 isomass lines that was within a few tens of percent of mapped area; however they under-predicted deposit mass at very proximal (< 50 km) and very distal (> 250 km) locations. Modeled grain-size distributions at sample locations are also generally coarser than observed. The mismatch may result from a combination of limitations in field sampling, approximations inherent in the model, errors in the numerical wind field, and aggregation of particles larger than 0.063 mm.

Alaska↗

USGS2022

Geology and stratigraphic correlation of the Murray and Carolyn Shoemaker formations across the Glen Torridon region, Gale crater, Mars

The Glen Torridon (GT) region within Gale crater, Mars, occurs in contact with the southern side of Vera Rubin ridge (VRR), a well-defined geomorphic feature that is comparatively resistant to erosion. Prior to detailed ground-based investigation of GT, its geologic relationship with VRR was unknown. Distinct lithologic subunits within the Jura member (Murray formation), which forms the upper part of VRR, made it possible to be also identified within GT. This indicates that the strata pass across the geomorphic divide between regions. Furthermore, the cross-bedded lower part of the overlying Knockfarril Hill member (Carolyn Shoemaker formation) also occurs within both VRR and GT. Correlation of both units demonstrates that the strata form a continuous stratigraphic succession regardless of large-scale geomorphic expression. The lithologic change from mudstone (Jura member) to cross-bedded sandstone (Knockfarril Hill member) heralds a significant shift in paleoenvironment from lacustrine to fluvial. The upper part of the Knockfarril Hill member consists of interbedded mudstone and sandstone that transitions to the overlying finely laminated mudstone of the Glasgow member, and a return to lacustrine deposition. In GT, the Stimson formation unconformably overlies the Glasgow member, where it demarks the southern boundary of GT. Contacts for each stratigraphic unit were defined and transferred to a high-resolution image base to make a geologic map and cross sections perpendicular to the NE strike. Stratal dips cannot exceed 2° NW to retain the positions of stratigraphic units in the locations they are exposed throughout GT.

Journal of Geophysical Research: Planets↗

USGS2020

Seismicity induced by massive wastewater injection near Puerto Gaitán, Colombia

Seven years after the beginning of a massive wastewater injection project in eastern Colombia, local earthquake activity increased significantly. The field operator and the Colombian Geological Survey immediately reinforced the monitoring of the area. Our analysis of the temporal evolution of the seismic and injection data together with our knowledge of the geological parameters of the region indicate that the surge of seismicity is being induced by the re-injection of produced water into the same three producing reservoirs. Earthquake activity began on known faults once disposal rates had reached a threshold of ∼2 × 10 6 m 3 of water per month. The average reservoir pressure had remained constant at 7.6 MPa after several years of production, sustained by a large, active aquifer. Surface injection pressures in the seismically active areas remain below 8.3 MPa, a value large enough to activate some of the faults. Since faults are mapped throughout the region and many do not have seismicity on them, we conclude that the existence of known faults is not the only control on whether earthquakes are generated. Stress conditions of these faults are open to future studies. Earthquakes are primarily found in four clusters, located near faults mapped by the operator. The hypocentres reveal vertical planes with orientations consistent with focal mechanisms of these events. Stress inversion of the focal mechanisms gives a maximum compression in the direction ENE-WSW, which is in agreement with borehole breakout measurements. Since the focal mechanisms of the earthquakes are consistent with the tectonic stress regime, we can conclude that the seismicity is resulting from the activation of critically stressed faults. Slip was progressive and seismic activity reached a peak before declining to few events per month. The decline in seismicity suggests that most of the stress has been relieved on the main faults. The magnitude of a large majority of the recorded earthquakes was lower than 4, as the pore pressure disturbance did not reach the mapped large faults whose activation might have resulted in larger magnitude earthquakes. Our study shows that a good knowledge of the local fault network and conditions of stress is of paramount importance when planning a massive water disposal program. These earthquakes indicate that while faults provide an opportunity to dispose produced water at an economically attractive volume–pressure ratio, the possibility of induced seismicity must also be considered.

Puerto Gaitan↗

USGS1995

Seafloor environments within the Boston Harbor-Massachusetts Bay sedimentary system: a regional synthesis

Modern seafloor sedimentary environments within the glaciated, topographically complex Boston Harbor and Massachusetts Bay area have been interpreted and mapped from an extensive collection of sidescan sonar records and supplemental marine geologic data. Three categories of environments are present that reflect the dominant long-term processes of erosion or nondeposition, deposition, and sediment reworking. Indicates areas within the Boston Harbor-Massachusetts Bay sedimentary system where fine-grained sediments and associated contaminants are likely to be either moved or deposited. It also provides a guide to the locations and variability of benthic habitats. -from Authors

Journal of Coastal Research↗

USGS2015

Strain accumulation across the Prince William Sound asperity, Southcentral Alaska

The surface velocities predicted by the conventional subduction model are compared to velocities measured in a GPS array (surveyed in 1993, 1995, 1997, 2000, and 2004) spanning the Prince William Sound asperity. The observed velocities in the comparison have been corrected to remove the contributions from postseismic (1964 Alaska earthquake) mantle relaxation. Except at the most seaward monument (located on Middleton Island at the seaward edge of the continental shelf, just 50 km landward of the deformation front in the Aleutian Trench), the corrected velocities qualitatively agree with those predicted by an improved, two-dimensional, back slip, subduction model in which the locked megathrust coincides with the plate interface identified by seismic refraction surveys, and the back slip rate is equal to the plate convergence rate. A better fit to the corrected velocities is furnished by either a back slip rate 20% greater than the plate convergence rate or a 30% shallower megathrust. The shallow megathrust in the latter fit may be an artifact of the uniform half-space Earth model used in the inversion. Backslip at the plate convergence rate on the megathrust mapped by refraction surveys would fit the data as well if the rigidity of the underthrust plate was twice that of the overlying plate, a rigidity contrast higher than expected. The anomalous motion at Middleton Island is attributed to continuous slip at near the plate convergence rate on a postulated, listric fault that splays off the megathrust at depth of about 12 km and outcrops on the continental slope south-southeast of Middleton Island.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

Spatially telescoping measurements for improved characterization of groundwater-surface water interactions

The suite of measurement methods available to characterize fluxes between groundwater and surface water is rapidly growing. However, there are few studies that examine approaches to design of field investigations that include multiple methods. We propose that performing field measurements in a spatially telescoping sequence improves measurement flexibility and accounts for nested heterogeneities while still allowing for parsimonious experimental design. We applied this spatially telescoping approach in a study of ground water-surface water (GW-SW) interaction during baseflow conditions along Lucile Creek, located near Wasilla, Alaska. Catchment-scale data, including channel geomorphic indices and hydrogeologic transects, were used to screen areas of potentially significant GW-SW exchange. Specifically, these data indicated increasing groundwater contribution from a deeper regional aquifer along the middle to lower reaches of the stream. This initial assessment was tested using reach-scale estimates of groundwater contribution during baseflow conditions, including differential discharge measurements and the use of chemical tracers analyzed in a three-component mixing model. The reach-scale measurements indicated a large increase in discharge along the middle reaches of the stream accompanied by a shift in chemical composition towards a regional groundwater end member. Finally, point measurements of vertical water fluxes -- obtained using seepage meters as well as temperature-based methods -- were used to evaluate spatial and temporal variability of GW-SW exchange within representative reaches. The spatial variability of upward fluxes, estimated using streambed temperature mapping at the sub-reach scale, was observed to vary in relation to both streambed composition and the magnitude of groundwater contribution from differential discharge measurements. The spatially telescoping approach improved the efficiency of this field investigation. Beginning our assessment with catchment-scale data allowed us to identify locations of GW-SW exchange, plan measurements at representative field sites and improve our interpretation of reach-scale and point-scale measurements.

Alaska↗

USGS2024

High resolution identification and quantification of diffuse deep groundwater discharge in mountain rivers using continuous boat-mounted helium measurements

Discharge of deeply sourced groundwater to streams is difficult to locate and quantify, particularly where both discrete and diffuse discharge points exist, but diffuse discharge is one of the primary controls on solute budgets in mountainous watersheds. The noble gas helium is a unique identifier of deep groundwater discharge because groundwater with long residence times is commonly enriched in helium. In this study, a portable mass spectrometer was used to measure longitudinal variation in dissolved helium concentrations in two mountainous rivers at high spatial resolution not feasible with traditional sampling techniques. Helium profiles were then simulated using a mass-balance model to quantify longitudinal variation in groundwater discharge to the receiving rivers. Results indicate helium concentrations were enriched by multiple orders of magnitude above atmospheric equilibrium in both rivers and that this persisted for up to 18 km below observed pulse inputs in the Colorado River. Helium mass-balance models match observed longitudinal patterns with the exception of sharp initial increases in helium observed in the rivers. Increased longitudinal groundwater discharge rates correspond to mapped geologic structures in both watersheds that likely transport deep geothermal water. Models show variable sensitivity to spatial assignment of input variables representing the groundwater source, illustrating the importance of collecting data from discrete groundwater discharges where possible. The methodology shows promise for field experiments designed to assess air–water exchange rates and to quantify total groundwater discharge from a combination of discrete and diffuse sources.

Colorado, Utah↗

USGS2008

Reconstructed historical land cover and biophysical parameters for studies of land-atmosphere interactions within the eastern United States

Over the past 350 years, the eastern half of the United States experienced extensive land cover changes. These began with land clearing in the 1600s, continued with widespread deforestation, wetland drainage, and intensive land use by 1920, and then evolved to the present-day landscape of forest regrowth, intensive agriculture, urban expansion, and landscape fragmentation. Such changes alter biophysical properties that are key determinants of land-atmosphere interactions (water, energy, and carbon exchanges). To understand the potential implications of these land use transformations, we developed and analyzed 20-km land cover and biophysical parameter data sets for the eastern United States at 1650, 1850, 1920, and 1992 time slices. Our approach combined potential vegetation, county-level census data, soils data, resource statistics, a Landsat-derived land cover classification, and published historical information on land cover and land use. We reconstructed land use intensity maps for each time slice and characterized the land cover condition. We combined these land use data with a mutually consistent set of biophysical parameter classes, to characterize the historical diversity and distribution of land surface properties. Time series maps of land surface albedo, leaf area index, a deciduousness index, canopy height, surface roughness, and potential saturated soils in 1650, 1850, 1920, and 1992 illustrate the profound effects of land use change on biophysical properties of the land surface. Although much of the eastern forest has returned, the average biophysical parameters for recent landscapes remain markedly different from those of earlier periods. Understanding the consequences of these historical changes will require land-atmosphere interactions modeling experiments.

Journal of Geophysical Research D: Atmospheres↗

USGS2012

Active high-resolution seismic tomography of compressional wave velocity and attenuation structure at Medicine Lake Volcano, northern California Cascade Range

We determine compressional wave velocity and attenuation structures for the upper crust beneath Medicine Lake volcano in northeast California using a high-resolution active source seismic tomography method. Medicine Lake volcano is a basalt through rhyolite shield volcano of the Cascade Range, lying east of the range axis. The Pg wave from eight explosive sources which has traveled upward through the target volume to a dense array of 140 seismographs provides 1- to 2-km resolution in the upper 5 to 7 km of the crust beneath the volcano. The experiment tests the hypothesis that Cascade Range volcanoes of this type are underlain only by small silicic magma chambers. We image a low-velocity low- Q region not larger than a few tens of cubic kilometers in volume beneath the summit caldera, supporting the hypothesis. A shallower high-velocity high-density feature, previously known to be present, is imaged for the first time in full plan view; it is east-west elongate, paralleling a topographic lineament between Medicine Lake volcano and Mount Shasta. This lineament is interpreted to be the result of an old crustal weakness now affecting the emplacement of magma, both on direct ascent from the lower crust and mantle and in migration from the shallow silicic chamber to summit vents. Differences between this high-velocity feature and the equivalent feature at Newbeny volcano, a volcano in central Oregon resembling Medicine Lake volcano, may partly explain the scarcity of surface hydrothermal features at Medicine Lake volcano. A major low-velocity low- Q feature beneath the southeast flank of the volcano, in an area with no Holocene vents, is interpreted as tephra, flows, and sediments from the volcano deeply ponded on the downthrown side of the Gillem fault, a normal fault mapped at the surface north of the volcano. A high- Q normal-velocity feature beneath the north rim of the summit caldera may be a small, possibly hot, subsolidus intrusion. A high-velocity low- Q region beneath the eastern caldera may be an area of boiling water between the magma chamber and the ponded east flank material. These structural data are useful both for understanding Cascade Range volcanism and for geothermal development in progress on the volcano.

Journal of Geophysical Research Solid Earth↗

USGS2007

Monitoring flooding in coastal wetlands by using radar imagery and ground-based measurements

Satellite radar was used in a Florida Juncus roemerianus marsh to map tidal flooding, a critical control of coastal vegetation distribution. Radar images taken during a time of near-continuous recordings of ground-based hydrology measurements directly linked marsh flooding to lowered radar returns and indicated a negative covariation between flood frequency and radar return. Flood-extent contours extracted from the radar images and calibrated with point depth measurements showed marsh elevation could be estimated to about 8 cm compared to the 150 cm topographic contours currently available.

International Journal of Remote Sensing↗