SEARCH · USGS Science

Results for “Environmental Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

USGS2009

Annual Maximum Stages and Discharges of Selected Streams in Virginia through 2007

Annual maximum stages and discharges for continuous-record and partial-record streamflow-gaging stations in Virginia are summarized through the 2007 water year. Data are included for over 500 active and discontinued streamflow-gaging stations operated by the U.S. Geological Survey, the Virginia Department of Environmental Quality, and other agencies for which 2 or more years of record are available. Additional information is provided for each station, including a brief description of gage location, drainage area, type of gage, vertical datum if known, method of development of the stage-discharge relation, bankfull stage if known, degree of regulation upstream from each gage, and pertinent remarks about historical data or local conditions that may affect peak flows.

Open-File Report↗

USGS2014

A geochemical perspective of Red Mountain: an unmined volcanogenic massive sulfide deposit in the Alaska Range

The U.S. Geological Survey (USGS) has investigated the environmental geochemistry of a group of unmined volcanogenic massive sulfide (VMS) deposits in the Bonnifield mining district, Alaska Range, east-central Alaska. The spectacularly colored Red Mountain deposit is the best exposed of these and provides excellent baseline geochemical data for natural environmental impacts of acidic rock drainage, metal dissolution and transport, and acidic salt and metal precipitation from an exposed and undisturbed VMS deposit.

Alaska↗

USGS1978

Nuclear power reactor sites in the southeastern United States

This report describes nuclear power reactor sites in the southeastern United States. The map indicates the location of all sites as of July 1976 in the conterminous United States, and a later published report will include all sites. The project is one of several in the National Environmental Overview Program of the U.S. Geological Survey which will identify and summarize geologic, hydrologic, and topographic topics associated with future energy, mineral resource, and land use development in the United States. The increasing use of atomic energy creates a need for the dissemination of information about nuclear reactors. Because power plant safety is related, in part, to the geology and seismology of the plant area and surroundings, this study is focused primarily on that relationship. Information about the geology and seismology is summarized from reports prepared by consultants to utility companies and submitted by the companies to the U.S. Nuclear Regulatory Commission (formerly the U.S. Atomic Energy Commission) in support of the application for a construction permit. Coordinates for site locations were established by the author from descriptive information in the reports. The U.S. Geological Survey 7-1/2 minute topographic maps were used in confirming the geographic location of the sites. The coordinates may in some cases represent the planned location rather than the exact actual location.

Open-File Report↗

USGS1996

Preliminary investigation of the distribution and resources of coal in the Kaiparowits Plateau, southern Utah

This report on the coal resources of the Kaiparowits Plateau, Utah is a contribution to the U.S. Geological Survey's (USGS) 'National Coal Resource Assessment' (NCRA), a five year effort to identify and characterize the coal beds and coal zones that could potentially provide the fuel for the Nation's coal-derived energy during the first quarter of the twenty-first century. For purposes of the NCRA study, the Nation is divided into regions. Teams of geoscientists, knowledgeable about each region, are developing the data bases and assessing the coal within each region. The five major coal-producing regions of the United States under investigation are: (1) the Appalachian Basin; (2) the Illinois Basin; (3) the Gulf of Mexico Coastal Plain; (4) the Powder River Basin and the Northern Great Plains; and (5) the Rocky Mountains and the Colorado Plateau. Six areas containing coal deposits in the Rocky Mountain and Colorado Plateau Region have been designated as high priority because of their potential for development. This report on the coal resources of the Kaiparowits Plateau is the first of the six to be completed. The coal quantities reported in this study are entirely 'resources' and represent, as accurately as the data allow, all the coal in the ground in beds greater than one foot thick. These resources are qualified and subdivided by thickness of coal beds, depth to the coal, distance from known data points, and inclination (dip) of the beds. The USGS has not attempted to estimate coal 'reserves' for this region. Reserves are that subset of the resource that could be economically produced at the present time. The coal resources are differentiated into 'identified' and 'hypothetical' following the standard classification system of the USGS (Wood and others, 1983). Identified resources are those within three miles of a measured thickness value, and hypothetical resources are further than three miles from a data point. Coal beds in the Kaiparowits Plateau are laterally discontinuous relative to many other coal bearing regions of the United States. That is, they end more abruptly and are more likely to fragment or split into thinner beds. Because of these characteristics, the data from approximately 160 drill holes and 40 measured sections available for use in this study are not sufficient to determine what proportion of the resources is technologically and economically recoverable. The Kaiparowits Plateau contains an original resource of 62 billion short tons of coal in the ground. Original resource is defined to include all coal beds greater than one foot thick in the area studied. None of the resource is recoverable by surface mining. However, the total resource figure must be regarded with caution because it does not reflect geologic, technological, land-use, and environmental restrictions that may affect the availability and the recoverability of the coal. At least 32 billion tons of coal are unlikely to be mined in the foreseeable future because the coal beds are either too deep, too thin to mine, inclined at more than 12?, or in beds that are too thick to be completely recovered in underground mining. The estimated balance of 30 billion tons of coal resources does not reflect land use or environmental restrictions, does not account for coal that would be bypassed due to mining of adjacent coal beds, does not consider the amount of coal that must remain in the ground for roof support, and does not take into consideration the continuity of beds for mining. Although all of these factors will reduce the amount of coal that could be recovered, there is not sufficient data available to estimate recoverable coal resources. For purposes of comparison, studies of coal resources in the eastern United States have determined that less than 10 percent of the original coal resource, in the areas studied, could be mined economically at today's prices (Rohrbacher and others, 1994).

Open-File Report↗

USGS1998

Evaluation of chemical data from selected sites in the Surface-Water Ambient Monitoring Program (SWAMP) in Florida

A cooperative study between the Florida Department of Environmental Protection (FDEP) and the U.S. Geological Survey was conducted to assess the integrity of selected water-quality data collected at 150 sites in the FDEP Surface-Water Ambient Monitoring Program (SWAMP) in Florida. The assessment included determining the consistency of the water-quality data collected statewide, including commonality of monitoring procedures and analytes, screening of the gross validity of a chemical analysis, and quality assurance and quality control (QA/QC) procedures. Four tests were used to screen data at selected SWAMP sites to estimate the gross validity of selected chemical data: (1) the ratio of dissolved solids (in milligrams per liter) to specific conductance (in microsiemens per centimeter); (2) the ratio of total cations (in milliequivalents per liter) multiplied by 100 to specific conductance (in microsiemens per centimeter); (3) the ratio of total anions (in milliequivalents per liter) multiplied by 100 to specific conductance (in microsiemens per centimeter); and (4) the ionic charge-balance error. Although the results of the four screening tests indicate that the chemical data generally are quite reliable, the extremely small number of samples (less than 5 percent of the total number of samples) with sufficient chemical information to run the tests may not provide a representative indication of the analytical accuracy of all laboratories in the program. In addition to the four screening tests, unusually low or high values were flagged for field and laboratory pH (less than 4.0 and greater than 9.0) and specific conductance (less than 10 and greater than 10,000 microsiemens per centimeter). The numbers of flagged data were less than 1 percent of the 19,937 water samples with pH values and less than 0.6 percent of the 16,553 water samples with specific conductance values. Thirty-four agencies responded to a detailed questionnaire that was sent to more than 60 agencies involved in the collection and analysis of surface-water-quality data for SWAMP. The purpose of the survey was to evaluate quality assurance methods and consistency of methods statewide. Information was compiled and summarized on monitoring network design, data review and upload procedures, laboratory and field sampling methods, and data practices. Currently, most agencies that responded to the survey follow FDEP-approved QA/QC protocol for sampling and have quality assurance practices for recording and reporting data. Also, most agencies responded that calibration procedures were followed in the laboratory for analysis of data, but no responses were given about the specific procedures. Approximately 50 percent of the respondents indicated that laboratory analysis methods have changed over time. With so many laboratories involved in analyzing samples for SWAMP, it is difficult to compare water quality from one site to another due to different reporting conventions for chemical constituents and different analytical methods over time. Most agencies responded that calibration methods are followed in the field, but no specific details were provided. Grab samples are the most common method of collection. Other data screening procedures are necessary to further evaluate the validity of chemical data collected at SWAMP sites. High variability in the concentration of targeted constituents may signal analytical problems, but more likely changes in concentration are related to hydrologic conditions. This underscores the need for accurate measurements of discharge, lake stage, tidal stage at the time of sampling so that changes in constituent concentrations can be properly evaluated and fluxes (loads) of nutrients or metals, for example, can be calculated and compared over time.

Florida↗

USGS2005

Monitoring-well network and sampling design for ground-water quality, Wind River Indian Reservation, Wyoming

The Wind River Indian Reservation, located in parts of Fremont and Hot Springs Counties, Wyoming, has a total land area of more than 3,500 square miles. Ground water on the Wind River Indian Reservation is a valuable resource for Shoshone and Northern Arapahoe tribal members and others who live on the Reservation. There are many types of land uses on the Reservation that have the potential to affect the quality of ground-water resources. Urban areas, rural housing developments, agricultural lands, landfills, oil and natural gas fields, mining, and pipeline utility corridors all have the potential to affect ground-water quality. A cooperative study was developed between the U.S. Geological Survey and the Wind River Environmental Quality Commission to identify areas of the Reservation that have the highest potential for ground-water contamination and develop a comprehensive plan to monitor these areas. An arithmetic overlay model for the Wind River Indian Reservation was created using seven geographic information system data layers representing factors with varying potential to affect ground-water quality. The data layers used were: the National Land Cover Dataset, water well density, aquifer sensitivity, oil and natural gas fields and petroleum pipelines, sites with potential contaminant sources, sites that are known to have ground-water contamination, and National Pollutant Discharge Elimination System sites. A prioritization map for monitoring ground-water quality on the Reservation was created using the model. The prioritization map ranks the priority for monitoring ground-water quality in different areas of the Reservation as low, medium, or high. To help minimize bias in selecting sites for a monitoring well network, an automated stratified random site-selection approach was used to select 30 sites for ground-water quality monitoring within the high priority areas. In addition, the study also provided a sampling design for constituents to be monitored, sampling frequency, and a simple water-table level observation well network.

Scientific Investigations Report↗

USGS2007

Use of borehole-radar methods to monitor a steam-enhanced remediation pilot study at a quarry at the former Loring Air Force Base, Maine

Single-hole radar reflection and crosshole radar tomography surveys were used in conjunction with conventional borehole-geophysical methods to evaluate the effectiveness of borehole-radar methods for monitoring the movement of steam and heat through fractured bedrock. The U.S. Geological Survey, in cooperation with U.S. Environmental Protection Agency (USEPA), conducted surveys in an abandoned limestone quarry at the former Loring Air Force Base during a field-scale, steam-enhanced remediation (SER) pilot project conducted by the USEPA, the U.S. Air Force, and the Maine Department of Environmental Protection to study the viability of SER to remediate non-aqueous phase liquid contamination in fractured bedrock. Numerical modeling and field experiments indicate that borehole-radar methods have the potential to monitor the presence of steam and to measure large temperature changes in the limestone matrix during SER operations. Based on modeling results, the replacement of water by steam in fractures should produce a decrease in radar reflectivity (amplitude of the reflected wave) by a factor of 10 and a change in reflection polarity. In addition, heating the limestone matrix should increase the bulk electrical conductivity and decrease the bulk dielectric permittivity. These changes result in an increase in radar attenuation and an increase in radar-wave propagation velocity, respectively. Single-hole radar reflection and crosshole radar tomography data were collected in two boreholes using 100-megahertz antennas before the start of steam injection, about 10 days after the steam injection began, and 2 months later, near the end of the injection. Fluid temperature logs show that the temperature of the fluid in the boreholes increased by 10?C (degrees Celsius) in one borehole and 40?C in the other; maximum temperatures were measured near the bottom of the boreholes. The results of the numerical modeling were used to interpret the borehole-radar data. Analyses of the single-hole radar reflection data showed almost no indication that steam replaced water in fractures near the boreholes because (1) no change of polarity was observed in the radar reflections; (2) variations in the measured traveltimes were unsubstantial; and (3) most of the observed decreases in reflectivity were too small to have resulted from the replacement of water by steam. Analyses of the crosshole radar tomography data also support the conclusion that steam did not replace water in the fractures around the boreholes because traveltime-difference and attenuation-difference tomograms showed only small decreases in velocity and small increases in attenuation accompanying the steam injection. The radar data are consistent with an increase in the conductivity of the limestone as a result of heating of the limestone matrix near the boreholes. Single-hole radar reflection data collected near the end of the steam injection near the bottom of the borehole with the largest temperature increase showed substantial attenuation. Also, reflector analysis showed small decreases in the amplitudes of radar-wave reflections in data collected before injection and data collected near the end of the collection period. In the crosshole radar tomography data, decreases in velocity and small increases in attenuation also are consistent with temperature increases in the matrix.

Maine↗

USGS2007

Characterization of Preferential Ground-Water Seepage From a Chlorinated Hydrocarbon-Contaminated Aquifer to West Branch Canal Creek, Aberdeen Proving Ground, Maryland, 2002-04

Wetlands act as natural transition zones between ground water and surface water, characterized by the complex interdependency of hydrology, chemical and physical properties, and biotic effects. Although field and laboratory demonstrations have shown efficient natural attenuation processes in the non-seep wetland areas and stream bottom sediments of West Branch Canal Creek, chlorinated volatile organic compounds are present in a freshwater tidal creek at Aberdeen Proving Ground, Maryland. Volatile organic compound concentrations in surface water indicate that in some areas of the wetland, preferential flow paths or seeps allow transport of organic compounds from the contaminated sand aquifer to the overlying surface water without undergoing natural attenuation. From 2002 through 2004, the U.S. Geological Survey, in cooperation with the Environmental Conservation and Restoration Division of the U.S. Army Garrison, Aberdeen Proving Ground, characterized preferential ground-water seepage as part of an ongoing investigation of contaminant distribution and natural attenuation processes in wetlands at this site. Seep areas were discrete and spatially consistent during thermal infrared surveys in 2002, 2003, and 2004 throughout West Branch Canal Creek wetlands. In these seep areas, temperature measurements in shallow pore water and sediment more closely resembled those in ground water than those in nearby surface water. Generally, pore water in seep areas contaminated with chlorinated volatile organic compounds had lower methane and greater volatile organic compound concentrations than pore water in non-seep wetland sediments. The volatile organic compounds detected in shallow pore water in seeps were spatially similar to the dominant volatile organic compounds in the underlying Canal Creek aquifer, with both parent and anaerobic daughter compounds detected. Seep locations characterized as focused seeps contained the highest concentrations of chlorinated parent compounds, relatively low concentrations of chlorinated daughter compounds, and insignificant concentrations of methane in shallow pore water samples. These seeps were primarily along the creek edge or formed a dendritic-like pattern between the wetland and creek channel. In contrast, seep locations characterized as diffuse seeps contained relatively high concentrations of chlorinated daughter compounds (or a mixture of daughter and parent compounds) and detectable methane concentrations in shallow pore water samples. These seeps were primarily along the wetland boundary. Qualitative thermal infrared surveys coupled with quantitative verification of temperature differences, and screening for volatile organic compound and methane concentrations proved to be effective tools in determining the overall extent of preferential seepage. Hydrologic and physical properties of wetland sediments were characterized at two focused and one diffuse seep location. In the seeps with focused discharge, measured seepage was consistent over the tidal cycle, whereas more variability with tidal fluctuation was measured in the diffuse seep location. At all locations, areas were identified within the general seep boundaries where discharge was minimal. In all cases, the geometric mean of non-zero vertical flux measurements was greater than those previously reported in the non-seep wetland sediments using flow-net analysis. Flux was greater in the focused discharge areas than in the diffuse discharge area, and all fluxes were within the range reported in the literature for wetland discharge. Vertical hydraulic conductivity estimated from seepage flux and a mean vertical gradient at seeps with focused discharge resulted in a minimum hydraulic conductivity two orders of magnitude greater than those estimated in the non-seep sediment. In contrast, vertical conductivity estimates at a diffuse seep were similar to estimates along a nearby line of section through a non-seep area.

Scientific Investigations Report↗

USGS2006

Cadmium risks to freshwater life: derivation and validation of low-effect criteria values using laboratory and field studies

In 2001, the U.S. Environmental Protection Agency (EPA) released updated aquatic life criteria for cadmium. Since then, additional data on the effects of cadmium to aquatic life have become available from studies supported by the EPA, Idaho Department of Environmental Quality (IDEQ), and the U.S. Geological Survey, among other sources. Updated data on the effects of cadmium to aquatic life were compiled and reviewed and low-effect concentrations were estimated. Low-effect values were calculated using EPA's guidelines for deriving numerical national water-quality criteria for the protection of aquatic organisms and their uses. Data on the short-term (acute) effects of cadmium on North American freshwater species that were suitable for criteria derivation were located for 69 species representing 57 genera and 33 families. For longer-term (chronic) effects of cadmium on North American freshwater species, suitable data were located for 28 species representing 21 genera and 17 families. Both the acute and chronic toxicity of cadmium were dependent on the hardness of the test water. Hardness-toxicity regressions were developed for both acute and chronic datasets so that effects data from different tests could be adjusted to a common water hardness. Hardness-adjusted effects values were pooled to obtain species and genus mean acute and chronic values, which then were ranked by their sensitivity to cadmium. The four most sensitive genera to acute exposures were, in order of increasing cadmium resistance, Oncorhynchus (Pacific trout and salmon), Salvelinus ('char' trout), Salmo (Atlantic trout and salmon), and Cottus (sculpin). The four most sensitive genera to chronic exposures were Hyalella (amphipod), Cottus, Gammarus (amphipod), and Salvelinus. Using the updated datasets, hardness dependent criteria equations were calculated for acute and chronic exposures to cadmium. At a hardness of 50 mg/L as calcium carbonate, the criterion maximum concentration (CMC, or 'acute' criterion) was calculated as 0.75 mug/L cadmium using the hardness-dependent equation CMC = e(0.8403 ? ln(hardness)-3.572) where the 'ln hardness' is the natural logarithm of the water hardness. Likewise, the criterion continuous concentration (CCC, or 'chronic' criterion) was calculated as 0.37 mug/L cadmium using the hardness-dependent equation CCC = (e(0.6247 ? ln(hardness)-3.384)) ? (1.101672 - ((ln hardness) ? 0.041838))). Using data that were independent of those used to derive the criteria, the criteria concentrations were evaluated to estimate whether adverse effects were expected to the biological integrity of natural waters or to selected species listed as threatened or endangered. One species was identified that would not be fully protected by the derived CCC, the amphipod Hyalella azteca. Exposure to CCC conditions likely would lead to population decreases in Hyalella azteca, the food web consequences of which probably would be slight if macroinvertebrate communities were otherwise diverse. Some data also suggested adverse behavioral changes are possible in fish following long-term exposures to low levels of cadmium, particularly in char (genus Salvelinus). Although ambiguous, these data indicate a need to periodically review the literature on behavioral changes in fish following metals exposure as more information becomes available. Most data reviewed indicated that criteria conditions were unlikely to contribute to overt adverse effects to either biological integrity or listed species. If elevated cadmium concentrations that approach the chronic criterion values occur in ambient waters, careful biological monitoring of invertebrate and fish assemblages would be prudent to validate the prediction that the assemblages would not be adversely affected by cadmium at criterion concentrations.

Scientific Investigations Report↗

USGS2009

Mercury Loads in the South River and Simulation of Mercury Total Maximum Daily Loads (TMDLs) for the South River, South Fork Shenandoah River, and Shenandoah River: Shenandoah Valley, Virginia

Due to elevated levels of methylmercury in fish, three streams in the Shenandoah Valley of Virginia have been placed on the State's 303d list of contaminated waters. These streams, the South River, the South Fork Shenandoah River, and parts of the Shenandoah River, are downstream from the city of Waynesboro, where mercury waste was discharged from 1929-1950 at an industrial site. To evaluate mercury contamination in fish, this total maximum daily load (TMDL) study was performed in a cooperative effort between the U.S. Geological Survey, the Virginia Department of Environmental Quality, and the U.S. Environmental Protection Agency. The investigation focused on the South River watershed, a headwater of the South Fork Shenandoah River, and extrapolated findings to the other affected downstream rivers. A numerical model of the watershed, based on Hydrological Simulation Program-FORTRAN (HSPF) software, was developed to simulate flows of water, sediment, and total mercury. Results from the investigation and numerical model indicate that contaminated flood-plain soils along the riverbank are the largest source of mercury to the river. Mercury associated with sediment accounts for 96 percent of the annual downstream mercury load (181 of 189 kilograms per year) at the mouth of the South River. Atmospherically deposited mercury contributes a smaller load (less than 1 percent) as do point sources, including current discharge from the historic industrial source area. In order to determine how reductions of mercury loading to the stream could reduce methylmercury concentrations in fish tissue below the U.S. Environmental Protection Agency criterion of 0.3 milligrams per kilogram, multiple scenarios were simulated. Bioaccumulation of mercury was expressed with a site-specific exponential relation between aqueous total mercury and methylmercury in smallmouth bass, the indicator fish species. Simulations indicate that if mercury loading were to decrease by 98.9 percent from 189 to 2 kilograms per year, fish tissue methylmercury concentrations would drop below 0.3 milligrams per kilogram. Based on the simulations, the estimated maximum load of total mercury that can enter the South River without causing fish tissue methylmercury concentrations to rise above 0.3 milligrams per kilogram is 2.03 kilograms per year for the South River, and 4.12 and 6.06 kilograms per year for the South Fork Shenandoah River and Shenandoah River, respectively.

Scientific Investigations Report↗

USGS2011

Predicting lake trophic state by relating Secchi-disk transparency measurements to Landsat-satellite imagery for Michigan inland lakes, 2003-05 and 2007-08

Inland lakes are an important economic and environmental resource for Michigan. The U.S. Geological Survey and the Michigan Department of Natural Resources and Environment have been cooperatively monitoring the quality of selected lakes in Michigan through the Lake Water Quality Assessment program. Sampling for this program began in 2001; by 2010, 730 of Michigan’s 11,000 inland lakes are expected to have been sampled once. Volunteers coordinated by the Michigan Department of Natural Resources and Environment began sampling lakes in 1974 and continue to sample (in 2010) approximately 250 inland lakes each year through the Michigan Cooperative Lakes Monitoring Program. Despite these sampling efforts, it still is impossible to physically collect measurements for all Michigan inland lakes; however, Landsat-satellite imagery has been used successfully in Minnesota, Wisconsin, Michigan, and elsewhere to predict the trophic state of unsampled inland lakes greater than 20 acres by producing regression equations relating in-place Secchi-disk measurements to Landsat bands. This study tested three alternatives to methods previously used in Michigan to improve results for predicted statewide Trophic State Index (TSI) computed from Secchi-disk transparency (TSI (SDT)). The alternative methods were used on 14 Landsat-satellite scenes with statewide TSI (SDT) for two time periods (2003– 05 and 2007–08). Specifically, the methods were (1) satellitedata processing techniques to remove areas affected by clouds, cloud shadows, haze, shoreline, and dense vegetation for inland lakes greater than 20 acres in Michigan; (2) comparison of the previous method for producing a single open-water predicted TSI (SDT) value (which was based on an area of interest (AOI) and lake-average approach) to an alternative Gethist method for identifying open-water areas in inland lakes (which follows the initial satellite-data processing and targets the darkest pixels, representing the deepest water, before regression equations are created); and (3) checking to see whether the predicted TSI (SDT) values compared well between two regression equations, one previously used in Michigan and an alternative equation from the hydrologic literature. The combination of improved satellite-data processing techniques and the Gethist method to identify open-water areas in inland lakes during 2003–05 and 2007–08 provided a stronger relation and statistical significance between predicted TSI (SDT) and measured TSI than did the AOI lake-average method; differences in results for the two methods were significant at the 99-percent confidence level. With regard to the comparison of the regression equations, there were no statistically significant differences at the 95-percent confidence level between results from the two equations. The previously used equation, in combination with the Gethist method, yielded coefficient of determination (R 2 ) values of 0.71 and 0.77 for the periods 2003–05 and 2007–08, respectively. The alternative equation, in combination with the Gethist method, yielded R 2 values of 0.74 and 0.75 for 2003–05 and 2007–08, respectively. Predicted TSI (SDT) and measured TSI (SDT) values for lakes used in the regression equations compared well, with R 2 values of 0.95 and 0.96 for predicted TSI (SDT) for 2003–05 and 2007–08, respectively. The R 2 values for statewide predicted TSI (SDT) for all inland lakes with available open-water areas for 2003–05 and 2007–08 were 0.91 and 0.93, respectively. Although the two equations predicted similar trophic-state classes, the alternative equation is planned to be used for future prediction of TSI (SDT) values for Michigan inland lakes, to promote consistency in comparing predicted values between States and for potential use in trend analysis.

Michigan↗

USGS2011

Estimated loads of suspended sediment and selected trace elements transported through the Clark Fork basin, Montana, in selected periods before and after the breach of Milltown Dam (water years 1985-2009)

Milltown Reservoir is a National Priorities List Superfund site in the upper Clark Fork basin of western Montana where sediments enriched in trace elements from historical mining and ore processing have been deposited since the completion of Milltown Dam in 1908. Milltown Dam was breached on March 28, 2008, as part of Superfund remediation activities to remove the dam and excavate contaminated sediment that had accumulated in Milltown Reservoir. In preparation for the breach of Milltown Dam, permanent drawdown of Milltown Reservoir began on June 1, 2006, and lowered the water-surface elevation by about 10 to 12 feet. After the breach of Milltown Dam, the water-surface elevation was lowered an additional 17 feet. Hydrologic data-collection activities were conducted by the U.S. Geological Survey in cooperation with U.S. Environmental Protection Agency to estimate loads of suspended sediment and trace elements transported through the Clark Fork basin before and after the breach of Milltown Dam. This report presents selected results of the data-collection activities.

Scientific Investigations Report↗

USGS2016

Surface-water quality and suspended-sediment quantity and quality within the Big River Basin, southeastern Missouri, 2011-13

Missouri was the leading producer of lead in the United States—as well as the world—for more than a century. One of the lead sources is known as the Old Lead Belt, located in southeast Missouri. The primary ore mineral in the region is galena, which can be found both in surface deposits and underground as deep as 200 feet. More than 8.5 million tons of lead were produced from the Old Lead Belt before operations ceased in 1972. Although active lead mining has ended, the effects of mining activities still remain in the form of large mine waste piles on the landscape typically near tributaries and the main stem of the Big River, which drains the Old Lead Belt. Six large mine waste piles encompassing more than 2,800 acres, exist within the Big River Basin. These six mine waste piles have been an available source of trace element-rich suspended sediments transported by natural erosional processes downstream into the Big River. A study was performed by the U.S. Geological Survey in cooperation with U.S. Environmental Protection Agency, Region 7, to calculate and characterize suspended-sediment quantity and quality within the Big River basin after reclamation of the mine waste piles ended in 2012. Streamflow and suspended sediments were quantified and sampled at two locations along a 68-mile reach of the Big River between Bonne Terre and Byrnes Mill, Missouri. The results will help regulatory agencies, such as the U.S. Environmental Protection Agency and U.S. Fish and Wildlife Service, determine impaired reaches and ecosystems for remedial and restoration efforts. Continuous stream stage, water temperature, and turbidity, and discrete suspended-sediment concentration data were collected at the two sites between October 2011 and September 2013. Suspended-sediment samples were collected during various hydrologic conditions to develop a regression model between discrete suspended-sediment concentration and continuous turbidity. Suspended sediments collected during stormflow events were analyzed for concentrations of trace elements such as barium, cadmium, lead, and zinc within two sediment size fractions. Event loads and annual loads of suspended sediment and select trace elements in suspended sediments also were calculated. Suspended-sediment loads computed by the regression model increased downstream from about 201,000 tons at the upstream site to about 355,000 tons at the downstream site during the study period. Stormflow-event-based (hereinafter referred to as “event-based”) suspended-sediment loads ranged from 180 to 32,000 tons at the upstream sampling site and 390 to 53,000 tons at the downstream site along the Big River. Although only seven stormflow events at the upstream site and six at the downstream site were sampled, the event-based suspended-sediment loads accounted for nearly 30 percent of the total suspended-sediment loads computed at both sites, indicating most of the suspended sediment transported through the Big River occurs during higher streamflows. Sediment quality guidelines, known as the threshold effect concentration and the probable effect concentration, used to assess toxicity of trace-element concentrations in sediments were compared to the cadmium, lead, and zinc concentrations in suspended sediment samples collected during stormflow events. All concentrations of cadmium, lead, and zinc in event-based suspended sediment samples exceeded the threshold and probable effect concentrations. Lead and zinc concentrations in the sediment size fraction less than 0.063 millimeters also exceeded the toxic effect threshold, above which sediment is considered to be heavily polluted causing adverse effects on sediment-dwelling organisms. Concentrations of cadmium and zinc in event-based suspended sediment samples were notably higher in samples from the upstream site than samples from the downstream site, indicating the sources of sediments enriched in these trace elements decrease in the downstream area of the watershed. The reduction in concentration of cadmium and zinc could be from dissolution of the constituents during transport or possibly a decrease in downstream source material. The lead concentration exceedance of the probable effects concentration as well as the threshold effects concentration indicates that lead-rich suspended sediments in the fraction less than 0.063 millimeters are readily available within the Big River Basin for transport. These sediments remain in the system from historical mining, and as the reclamation of mine waste piles in the upstream area of the watershed reduce additional sediment loadings, these fine sediments may be continually released as the river scours the streambed and erodes stream banks causing the lead-rich suspended sediment to remain in a state of equilibrium. Barium concentrations in suspended-sediments were nearly twice as high in stormflow event samples collected at the downstream site as compared to samples from the upstream site. The source of barium in the Big River could be from Mineral Fork and Mill Creek, which flow through the historical barite (barium sulfate, also known as tiff) mining district in Washington County, and discharge into the Big River between the two study sites. Total trace-element loads and yields in suspended sediments were computed from the sampled events for each year in the study. The total barium loads in suspended sediments were higher for sampled events collected at the downstream site than the upstream site during both study years. Cadmium and zinc loads in suspended sediments were lower at the downstream site than the upstream site, although the decrease in total load was not substantial during the study period. Lead loads in suspended sediments were lower at the downstream site during the first study year, with a slightly higher load downstream in the second year though the increase from upstream to downstream was small. Event-based yields were higher at the upstream site, indicating that readily available sediment sources are closer to the upstream site where more mining affected areas are located. The estimates determined during large precipitation events indicate that large sources of suspended sediments with large concentrations of trace elements are still available for transport within the Big River.

Missouri↗

USGS2016

Evaluation of background concentrations of selected chemical and radiochemical constituents in water from the eastern Snake River Plain aquifer at and near the Idaho National Laboratory, Idaho

The U.S. Geological Survey and Idaho Department of Environmental Quality Idaho National Laboratory (INL) Oversight Program in cooperation with the U.S. Department of Energy determined background concentrations of selected chemical and radiochemical constituents in the eastern Snake River Plain aquifer to aid with ongoing cleanup efforts at the INL. Chemical and radiochemical constituents including calcium, magnesium, sodium, potassium, silica, chloride, sulfate, fluoride, bicarbonate, chromium, nitrate, tritium, strontium-90, chlorine-36, iodine-129, plutonium-238, plutonium-239, -240 (undivided), americium-241, technetium-99, uranium-234, uranium-235, and uranium-238 were selected for the background study because they were either not analyzed in earlier studies or new data became available to give a more recent determination of background concentrations. Samples of water collected from wells and springs at and near the INL that were not believed to be influenced by wastewater disposal were used to identify background concentrations. Groundwater in the eastern Snake River Plain aquifer at and near the INL was divided into two major water types (western tributary and eastern regional) based on concentrations of lithium less than and greater than 5 micrograms per liter (μg/L). Median concentrations for each constituent were used to define the upper limit of background. The upper limit of background concentrations for inorganic chemicals for western tributary water was 40.7 milligrams per liter (mg/L) for calcium, 15.3 mg/L for magnesium, 8.30 mg/L for sodium, 2.32 mg/L for potassium, 23.1 mg/L for silica, 11.8 mg/L for chloride, 21.4 mg/L for sulfate, 0.20 mg/L for fluoride, 176 mg/L for bicarbonate, 4.00 μg/L for chromium, and 0.655 mg/L for nitrate. The upper limit of background concentrations for inorganic chemicals for eastern regional water was 34.05 mg/L for calcium, 13.85 mg/L for magnesium, 14.85 mg/L for sodium, 3.22 mg/L for potassium, 31.0 mg/L for silica, 14.15 mg/L for chloride, 20.2 mg/L for sulfate, 0.4675 mg/L for fluoride, 165 mg/L for bicarbonate, 3.00 μg/L for chromium, and 0.995 mg/L for nitrate. The upper limit of background concentrations for radiochemical constituents for western tributary water was 34.15 ±2.35 picocuries per liter (pCi/L) for tritium, 0.00098 ±0.00006 pCi/L for chlorine-36, 0.000011 ±0.000005 pCi/L for iodine-129, <0.0000054 pCi/L for technetium-99, 0 pCi/L for strontium-90, plutonium-238, plutonium-239, -240 (undivided), and americium-241, 1.36 pCi/L with undetermined uncertainty for uranium-234, 0.025 ±0.001 pCi/L for uranium-235, and 0.541 ±0.001 pCi/L for uranium-238. The upper limit of background concentrations for radiochemical constituents for eastern regional water was 5.43 ±0.574 pCi/L for tritium, 0.0002048 ±0.0000054 pCi/L for chlorine-36, 0.000000865 ±0.000000015 pCi/L for iodine-129, <0.0000054 pCi/L for technetium-99, 0 pCi/L for strontium-90, plutonium-238, plutonium-239, -240 (undivided), and americium-241, 1.32 ±0.77 pCi/L for uranium-234, 0.016 ±0.012 pCi/L for uranium-235, and 0.477 ±0.044 pCi/L for uranium-238.

Idaho↗

USGS2017

Sequence stratigraphy, seismic stratigraphy, and seismic structures of the lower intermediate confining unit and most of the Floridan aquifer system, Broward County, Florida

Deep well injection and disposal of treated wastewater into the highly transmissive saline Boulder Zone in the lower part of the Floridan aquifer system began in 1971. The zone of injection is a highly transmissive hydrogeologic unit, the Boulder Zone, in the lower part of the Floridan aquifer system. Since the 1990s, however, treated wastewater injection into the Boulder Zone in southeastern Florida has been detected at three treated wastewater injection utilities in the brackish upper part of the Floridan aquifer system designated for potential use as drinking water. At a time when usage of the Boulder Zone for treated wastewater disposal is increasing and the utilization of the upper part of the Floridan aquifer system for drinking water is intensifying, there is an urgency to understand the nature of cross-formational fluid flow and identify possible fluid pathways from the lower to upper zones of the Floridan aquifer system. To better understand the hydrogeologic controls on groundwater movement through the Floridan aquifer system in southeastern Florida, the U.S. Geological Survey and the Broward County Environmental Planning and Community Resilience Division conducted a 3.5-year cooperative study from July 2012 to December 2015. The study characterizes the sequence stratigraphy, seismic stratigraphy, and seismic structures of the lower part of the intermediate confining unit aquifer and most of the Floridan aquifer system. Data obtained to meet the study objective include 80 miles of high-resolution, two-dimensional (2D), seismic-reflection profiles acquired from canals in eastern Broward County. These profiles have been used to characterize the sequence stratigraphy, seismic stratigraphy, and seismic structures in a 425-square-mile study area. Horizon mapping of the seismic-reflection profiles and additional data collection from well logs and cores or cuttings from 44 wells were focused on construction of three-dimensional (3D) visualizations of eight sequence stratigraphic cycles that compose the Eocene to Miocene Oldsmar, Avon Park, and Arcadia Formations. The mapping of these seismic-reflection and well data has produced a refined Cenozoic sequence stratigraphic, seismic stratigraphic, and hydrogeologic framework of southeastern Florida. The upward transition from the Oldsmar Formation to the Avon Park Formation and the Arcadia Formation embodies the evolution from (1) a tropical to subtropical, shallow-marine, carbonate platform, represented by the Oldsmar and Avon Park Formations, to (2) a broad, temperate, mixed carbonate-siliciclastic shallow marine shelf, represented by the lower part of the Arcadia Formation, and to (3) a temperate, distally steepened carbonate ramp represented by the upper part of the Arcadia Formation. In the study area, the depositional sequences and seismic sequences have a direct correlation with hydrogeologic units. The approximate upper boundary of four principal permeable units of the Floridan aquifer system (Upper Floridan aquifer, Avon Park permeable zone, uppermost major permeable zone of the Lower Floridan aquifer, and Boulder Zone) have sequence stratigraphic and seismic-reflection signatures that were identified on cross sections, mapped, or both, and therefore the sequence stratigraphy and seismic stratigraphy were used to guide the development of a refined spatial representation of these hydrogeologic units. In all cases, the permeability of the four permeable units is related to stratiform megaporosity generated by ancient dissolution of carbonate rock associated with subaerial exposure and unconformities at the upper surfaces of carbonate depositional cycles of several hierarchical scales ranging from high-frequency cycles to depositional sequences. Additionally, interparticle porosity also contributes substantially to the stratiform permeability in much of the Upper Floridan aquifer. Information from seismic stratigraphy allowed 3D geomodeling of hydrogeologic units—an approach never before applied to this area. Notably, the 3D geomodeling provided 3D visualizations and geocellular models of the depositional sequences, hydrostratigraphy, and structural features. The geocellular data could be used to update the hydrogeologic structure inherent to groundwater flow simulations that are designed to address the sustainability of the water resources of the Floridan aquifer system. Two kinds of pathways that could enable upward cross-formational flow of injected treated wastewater from the Boulder Zone have been identified in the 80 miles of high-resolution seismic data collected for this study: a near-vertical reverse fault and karst collapse structures. The single reverse fault, inferred to be of tectonic origin, is in extreme northeastern Broward County and has an offset of about 19 feet at the level of the Arcadia Formation. Most of the 17 karst collapse structures identified manifest as columniform, vertically stacked sagging seismic reflections that span early Eocene to Miocene age rocks equivalent to much of the Floridan aquifer system and the lower part of the overlying intermediate confining unit. In some cases, the seismic-sag structures extend upward into strata of Pliocene age. The seismic-sag structures are interpreted to have a semicircular shape in plan view on the basis of comparison to (1) other seismic-sag structures in southeastern Florida mapped with two 2D seismic cross lines or 3D data, (2) comparison to these structures located in other carbonate provinces, and (3) plausible extensional ring faults detected with multi-attribute analysis. The seismic-sag structures in the study area have heights as great as 2,500 vertical feet, though importantly, one spans about 7,800 feet. Both multi-attribute analysis and visual detection of offset of seismic reflections within the seismic-sag structures indicate faults and fractures are associated with many of the structures. Multi-attribute analysis highlighting chimney fluid pathways also indicates that the seismic-sag structures have a high probability for potential vertical cross-formational fluid flow along the faulted and fractured structures. A collapse of the seismic-sag structures within a deep burial setting evokes an origin related to hypogenic karst processes by ascending flow of subsurface fluids. In addition, paleo-epigenic karst related to major regional subaerial unconformities within the Florida Platform generated collapse structures (paleo-sinkholes) that are much smaller in scale than the cross-formational seismic-sag structures.

Florida↗

USGS2019

Development and evaluation of a record extension technique for estimating discharge at selected stream sites in New Hampshire

Daily mean discharges are needed for rivers in New Hampshire for the management of instream flows. It is impractical, however, to continuously gage all streams in New Hampshire, and at many sites where information is needed, the discharge data required do not exist. For such sites, techniques for estimating discharge are available. The U.S. Geological Survey, in cooperation with the New Hampshire Department of Environmental Services, developed and evaluated the accuracy of estimated discharge records for six discontinued U.S. Geological Survey streamgages in New Hampshire. The estimated records were developed by using the maintenance of variance extension, type 1 (MOVE.1), record extension technique and were generated for periods with concurrent observed records to allow for evaluation. The six discontinued streamgages were on New Hampshire designated rivers throughout the State and had drainage areas ranging from 35.6 to 395 square miles with little to no regulation. Estimated records for four of the six streamgages had Nash-Sutcliffe efficiency coefficients greater than 0.85. The other two streamgages had Nash-Sutcliffe efficiency coefficients between 0.45 and 0.60. For the four streamgages with the higher Nash-Sutcliffe efficiency coefficients, more than 35 percent of the estimated record was within 15 percent of the observed record. At the other two streamgages, more than 23 percent of the estimated record was within 15 percent of the observed record. At lower discharges (exceeded 80 percent of the time), for four of the six streamgages, more than 40 percent of the estimated record was within 15 percent of the observed record. The site with the lowest Nash-Sutcliffe efficiency coefficient had more than 14 percent of the estimated record at low discharges within 15 percent of the observed record.

New Hampshire↗

USGS2025

Microbial source tracking in Cedar and Crane Creeks near Curtice, Ohio, 2021

Elevated concentrations of Escherichia coli ( E. coli ) bacteria and signs of sewage lead to impairment of Cedar and Crane Creeks near the town of Curtice, Ohio. In 2021, the U.S. Geological Survey, in cooperation with Ohio Environmental Protection Agency, collected samples and analyzed them for concentrations of E. coli and microbial source tracking (MST) markers to help characterize the locations and sources of fecal contamination and better inform potential remediation strategies. The study included a total of 118 samples collected at 12 sites (6 on Cedar Creek and 6 on Crane Creek) from May to September 2021 during wet and dry weather conditions. All samples were analyzed for E. coli concentrations, and human and canine-associated MST markers. A subset of samples was analyzed for MST markers associated with swine, ruminant, cattle, horse, waterfowl, and poultry. Human-origin fecal contamination was found at all sites sampled in this study and concentrations of the human-associated MST marker HF183/BacR287 were significantly correlated with E. coli concentrations. The HF183/BacR287 marker was detected in 114 of 118 samples and the detection frequency in samples at each site ranged from 90 to 100 percent. E. coli concentrations exceeded the Ohio Environmental Protection Agency’s regulatory statistical threshold (410 most probable number of E. coli per 100 milliliters) in 91 percent of samples. These findings verified that Cedar and Crane Creeks are impaired by bacteria, and the HF183/BacR287 marker results support that human-origin fecal contamination is the dominant contributor to that impairment. The canine-associated MST marker BacCan was also prevalent in collected samples (detected in 112 of 118 samples); however, BacCan can also be detected in human waste, so it is not feasible to ascertain whether canine feces is a source of contamination in these watersheds. Human fecal contamination was nearly uniform among sites, but the Martin Williston Road ditch effluent site along Crane Creek had a significantly higher median HF183/BacR287 concentration than the other Crane Creek sites. Results indicate that the Martin Williston Road ditch is a potential source of human-origin fecal contamination to Crane Creek. There is likely additional human fecal contamination upstream from the study area.

Ohio↗

USGS2026

Simulation of groundwater flow to evaluate hydrogeologic controls on a PFAS plume, Coakley Landfill Superfund site, Rockingham County, New Hampshire

Per- and polyfluoroalkyl substances (PFAS), including perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), have been detected at combined concentrations above 2,000 nanograms per liter (ng/L) at groundwater seep locations near the Coakley Landfill Superfund site, in North Hampton, New Hampshire. The landfill was active from 1972 to 1985. An impermeable cap was placed on the landfill in 1998. The adjacent area to the Coakley Landfill has many water supply wells, and transport of PFAS compounds to the wells is a concern. Fracture anisotropy in the underlying bedrock aquifer complicates the understanding of PFAS transport because groundwater preferentially travels along fractures that may not align with the prevailing groundwater flow direction. In 2018, the U.S. Environmental Protection Agency and the U.S. Geological Survey began an investigation of the groundwater flow from the Coakley Landfill site. This report describes the modification of a numerical groundwater-flow model for the local area around the Coakley Landfill and summarizes findings of the investigation. In addition, this report includes a brief description of PFOA and PFOS occurrence, a discussion of model construction, evaluation of model performance through calibration, and discussion of simulation results for two periods (before and after capping). Limitations are also discussed. Results show that simulated groundwater flow moves from the Coakley Landfill to the west and north. Advective transport modeling using particle tracking shows that groundwater from the landfill discharges primarily to streams to the west and north, and a small amount is transported to distal wells. Dilution of contaminants through advection and dispersion likely plays a role in whether PFAS compounds from the landfill will be detected above laboratory reporting levels at distal wells.

New Hampshire↗