USGS Science⌕ Search

SEARCH · USGS Science

Results for “Clay Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources
USGS2008

Paleoclimatic significance of chemical weathering in loess-derived paleosols of subarctic central Alaska

Chemical weathering in soils has not been studied extensively in high-latitude regions. Loess sequences with modern soils and paleosols are present in much of subarctic Alaska, and allow an assessment of present and past chemical weathering. Five sections were studied in detail in the Fairbanks, Alaska, area. Paleosols likely date to mid-Pleistocene interglacials, the last interglacial, and early-to-mid-Wisconsin interstadiale. Ratios of mobile (Na, Ca, Mg, Si) to immobile (Ti or Zr) elements indicate that modern soils and most interstadial and interglacial paleosols are characterized by significant chemical weathering. Na2O/TiO2 is lower in modern soils and most paleosols compared to parent loess, indicating depletion of plagioclase. In the clay fraction, smectite is present in Tanana and Yukon River source sediments, but is absent or poorly expressed in modern soils and paleosols, indicating depletion of this mineral also. Loss of both plagioclase and smectite is well expressed in soils and paleosols as lower SiO 2/TiO2. Carbonates are present in the river source sediments, but based on CaO/TiO2, they are depleted in soils and most paleosols (with one exception in the early-to-mid-Wisconsin period). Thus, most soil-forming intervals during past interglacial and interstadial periods in Alaska had climatic regimes that were at least as favorable to mineral weathering as today, and suggest boreal forest or acidic tundra vegetation. ?? 2008 Regents of the University of Colorado.

Arctic, Antarctic, and Alpine Research↗
USGS1996

Porosity factors that control the hydraulic conductivity of soil-saprolite transitional zones

Slowly permeable transitional horizons separate soil and saprolite, but these horizons cannot be identified easily in the field. The objectives of this study were to determine why the soil-saprolite transitional zone (BC and CB horizons) is slowly permeable, and to evaluate ways for identifying it in the field. Two saprolite deposits were studied in the North Carolina Piedmont. At each site, saturated and unsaturated hydraulic conductivities ( K sat and K unsat ) were measured for major horizons. Volume fractions of water-conducting pores were also compared with the changes in hydraulic conductivity with depth. Horizon mean K sat values at both sites ranged from virtually 0 to approximately 3 cm h -1 . The lowest K sat values (<0.3 cm h -1 ) occurred in or near the transitional horizons that were directly below the Bt horizons. Changes in the volume of pores within or between mineral grains (termed inter/intraparticle pores ) with depth corresponded to changes in both K sat and K unsat . In the transitional horizons, the inter/intraparticle pores were plugged with clay and this caused the horizons to have low K values. In situ measurements of K sat with depth were the most accurate technique to use for identifying transitional zones in the field. Examination of both the soil and rock structures in pits was also an acceptable technique. Texture and consistence were not considered reliable for pin-pointing transitional horizons.

North Carolina↗
USGS2004

Petrography and character of the bedrock surface beneath western Cape Cod, Massachusetts

Cores collected during recent drilling in western Cape Cod, Massachusetts provide insight into the topography and petrology of the underlying bedrock. 62 drill sites spread over a ???140 km2 study area produced cores of granitoids (31), orthogneisses (20), basalts/diabases (4), amphibolites (3), felsic mylonites (2), and dolomitic rock (2). Granitoid cores range in composition from granite to tonalite to quartz diorite, but are dominated by single-mica granites. Alteration is common in nearly all cores examined in this study, and is evidenced by the secondary growth of chlorite and epidote. The granitoids resemble rocks of the Dedham and Fall River terranes (Wones and Goldsmith 1991). Gneisses from the study area generally contain the mineral assemblage hornblende+plagioclase+quartz+biotite+epidote??chlorite?? sphene??K-feldspar??sericite+oxides. Based on mineral assemblages, we estimate peak metamorphic grade to be of lower amphibolite facies. X-ray powder diffraction of unmetamorphosed dolomitic cores shows presence of layered silicates (clays), plagioclase, and possible magnesite. Contours of the bedrock surface show locally irregular topography suggesting erosion by glacial scour. The distribution of lithologies suggests a possible continuation of the New Bedford gneissic terrane that outcrops 25 km to the west. Dolomitic rocks may represent a lithified fault gouge material at the eastern edge of the gneissic zone. Basalts/diabases are interpreted to be post-metamorphic dikes of Late Paleozoic age, or possibly associated with Mesozoic rifting.

Massachussets↗
USGS2025

Deformation mechanisms in quartz veins and shear zones elucidate the origin of gold mineralization at Pogo, Alaska

Pogo is a quartz vein hosted, ca. 8 Moz gold deposit. Although it has similarities to orogenic and magmatic-hydrothermal deposits, its origin remains enigmatic. Observations from surface exposures, underground workings, and drill core provide new constraints on quartz vein origins with implications for mineralization. Abundant, largely barren metamorphic segregation quartz veins are found throughout interior Alaska and share characteristics with mineralized quartz veins at Pogo. Pogo quartz veins show crystal plastic deformation fabrics consistent with greenschist to amphibolite facies metamorphism and a lack of internal shear. In contrast, gold in Pogo quartz veins occurs in brittle microfaults and fractures with sulphides such as arsenopyrite and pyrrhotite. Major and minor cataclastic shear zones also exist at Pogo. Cataclastic shear zones commonly cut the mineralized quartz veins and porphyroclasts are dominated by quartz with the same plastic deformation fabrics found in the major Pogo quartz veins. The porphyroclasts, and the carbonaceous clay-rich matrix they sit in, also contain gold indicating that the shear zones postdate quartz and earliest gold deposition. These observations suggest that competency contrasts between the quartz veins and their phyllosilicate-rich host rocks controlled transient permeability formed by late, preferential brittle deformation events localizing sulphide ± gold deposition.

Alaska↗
USGS1957

Geology and ground-water resources of Galveston County, Texas

Galveston County, on the Texas gulf coast, is underlain by alternating beds of sand and clay. These sand and clay strata crop out in belts that roughly parallel the coastline and dip gently southeastward at an angle gre? +,er than the slope of the land, thereby creating artesian aquifers. The formations that yield potable water to wells are the Lissie formation, the "Alta Loma" sand and other sands of the Beaumont clay, and beach and dune sands of Recent aie. Most of the potable water is obtained on the mainland of Galveston County. The water from most wells on Galveston Island is highly mineralized. Before 1948, water for all public use and nearly all industrial use was derived from wells. Most ground water now used in the county is pumped from areas around Alta Loma and Texas City. The average daily pumpage in these areas increased from 6 million gallons in 1938 to 17.8 million gallons in 1940 and reached a peak of about 34 million gallons in 1945. Between 1945 and 1948 the rate of pumpage was nearly constant, but in 1948 surface water was diverted from the Brazos River to supply some of the Texas City industries and, as a result, the use of ground water was reduced about 30 percent. Water levels declined in county wells as the pumpage increased during the years prior to 1948. Since water from the Brazos River has been utilized the levels have risen in many wells and tended to become constant in others. Subsidence of the land in a large part of the county, particularly in the Texas City area, is attributed to the excessive withdrawal of ground water. Salt-water encroachment has been a problem in the county for many years. Salt water was present in the lower part of the "Alta Loma" sand in the Alta Loma and Texas City areas and throughout that sand on Galveston Island when the first wells were drilled. Encroachment from either below or downdip took place with the lowering of artesian pressure in the aquifer in the vicinity of Alta Loma and Texas City. Pumping tests reveal that the average coefficient of transmissibility of the "Alta Loma" sand is 102,000 at Alta Loma and 153,000 at Texas City. The coefficients- of transmissibility of sands in the upper part of the Beaumont clay around Texas City average 27,300. Surface water from the Brazos River, used for the irrigation of rice since 1942, was made available in 1948 to industries in Texas City as a substitute for ground water. The water from the Brazos River is variable in quality, but probably can be utilized on a somewhat larger scale than at present. Much additional ground water could be obtained from both the "Alta Loma" sand and the upper part of the Beaumont clay, especially in the northern and western parts of the county. Before large developments of supplies are planned, however, these areas should be explored by test drilling. The problems of well spacing and pumping rates should be thoroughly studied in order to determine the maximum development permitted by the ground-water supply. Current observations should be continued with special emphasis on the progress of salt-water encroachment.

Water Supply Paper↗
USGS1976

Mineral resources of Elko County, Nevada

Of the 66 named mining districts in Elko County, 56 have been productive of one or more of 19 different commodities: 11 metals--copper, gold, silver, lead, zinc, mercury, tungsten, manganese, iron, uranium, and antimony; 8 nonmetals--sand and gravel, stone, barite, diatomite, gems, oil shale, volcanic ash, and clay. In addition to the commodities produced, at least 5 others--beryllium, molybdenum, tin, phosphorite, and petroleum, occur in amounts sufficient to warrant exploration. The other districts have been explored, but no production has been recorded. Total value-when-sold of production recorded through 1969 was nearly $91 million; actual production was considerably greater, especially if sand and gravel, barite, and other nonmetallic products before 1953 are included. In value of metals produced, the five highest districts are Mountain City ($26 million), Tuscarora ($11 million), Jarbidge ($10 million), Aura ($6 million), and Railroad (nearly $5 million). The Rio Tinto copper mine in the Mountain City district yielded $21 million. Of the 17 districts that produced nonmetallic minerals, Bootstrap .is the largest producer, containing the Rossi mine, one of the two largest barite mines in the United States. Most of /he metals produced name from veins and replacement deposits in limestone or dolomite near granitic stocks; exceptions are manganese and mercury, which are not associated with known or inferred stocks; mercury is further excepted because it occurs in volcanic rocks, as do a few deposits of the major metals. The largest deposit--the Rio Tinto lode--was a combination of fissure filling and replacement along a bedding plane shear zone 150 ft wide and 1,200 ft long in carbonaceous shale of the Valmy Formation; this deposit is apparently older than the Mountain City stock and its mineralization may be related to Paleozoic mafic volcanism later than a major thrust fault, inferred to underlie the area at a depth of about 5,000 ft. Most of the nonmetallic minerals mined were sedimentary bedded deposits, but mica was mined from pegmatite deposits, and turquoise from both placer and hydrothermal deposits. The largest known reserves of metals (1973) are of porphyry copper in the Dolly Varden district and gold in the Bootstrap district. Reserves of barite also are presumed to be large. The greatest potential for future production of metals, notably copper and gold, appears to be in the known districts or extensions of them and peripheral to deposits that are related to known or concealed plutons and thrust faults. Potential resources in deposits too low in grade to be worked profitably at the present time include all commodities that have been produced and, in addition, known, deposits of beryllium, molybdenum, tin, and phosphorite. Speculative resources in undiscovered deposits may reasonably be predicted to include all known commodities as well as others that are unsuspected. Petroleum may yet be produced from the Elko Formation and geothermal energy from the Ruby Valley and Elko areas.

Open-File Report↗
USGS2026

Evidence for a biological origin of uranium-rich carbon masses within the Ediacaran Salt Range Formation of Pakistan

Thucholites are unique organic structures found in igneous and sedimentary rocks composed of a U-C-rich interior enclosed by an organic outer shell. Their formation and occurrence have perplexed scientists for over 100 years. Typically, thucholites are sparse in sedimentary rocks but where found in abundance, they may be the result of rapid paleoecological disruptions, e.g., volcanic ashfall. Here, we evaluated thucholites from the Ediacaran Salt Range Formation of the Indus Basin in Pakistan using field emission scanning electron microscopy (FESEM) and nanoscale secondary ion mass spectroscopy (NanoSIMS) to propose a two-stage mechanism for thucholite development. NanoSIMS results suggest organic matter in thucholite cores formed by biological fractionation (represented by the presence of lighter 13 C/ 12 C and 34 S/ 32 S) while the outer organic mantle formed via radiolysis-induced polymerization. FESEM elemental analysis confirms compositional differences between the two thucholite components (core and mantle), further implying their contrasting origins. Dimensional comparison of thucholite cores and their U-bearing mineral morphologies to ancient and modern U-biomineralized microbes suggests that the thucholite cores formed from metal-biological interactions. The presence of volcanogenic biotite, alkali feldspar, and clay spherules (interpreted as devitrified volcanic glass) with thucholite suggests that the thucholite cores in the Salt Range Formation are biological responses to rapid paleoenvironmental change from volcanic eruption which preserved the fossilized morphologies of Proterozoic microorganisms.

Salt Range↗
USGS2004

Geochemistry of Mercury and other trace elements in fluvial tailings upstream of Daguerre Point Dam, Yuba River, California, August 2001

This study was designed to characterize the particle-size distribution and the concentrations of total mercury (HgT), methylmercury (MeHg), and other constituents in sediments trapped behind Daguerre Point Dam, a 28-foot-high structure on the lower Yuba River in California. The results of the study will assist other agencies in evaluating potential environmental impacts from mobilization of sediments if Daguerre Point Dam is modified or removed to improve the passage of anadromous fish. Methylmercury is of particular concern owing to its toxicity and propensity to bioaccumulate. A limited amount of recent work on hydraulic and dredge tailings in other watersheds has indicated that mercury and MeHg concentrations may be elevated in the fine-grained fractions of placer mining debris, particularly clay and silt. Mercury associated with tailings from placer gold mines is a source of continued contamination in Sierra Nevada watersheds and downstream water bodies, including the Sacramento?San Joaquin Delta and the San Francisco Bay of northern California. Churn drilling was used to recover sediments and heavy minerals at 5-foot intervals from six locations upstream of Daguerre Point Dam. Maximum depth of penetration ranged from 17.5 to 35 feet below land surface, resulting in 31 discreet drilled intervals. Drilling in permeable, unconsolidated sediments below the streambed of the Yuba River released a significant volume of water along with the sediment, which complicated the sampling and characterization effort. Overflow of a silty fraction sampled at the drill site contained suspended sediment consisting predominantly of silt and clay, with HgT concentration ranging from 33 to 1,100 ng/g (nanogram per gram) dry weight. A sandy fraction, collected after sieving sediment through a 2-millimeter vibratory screen, contained from 14 to 82 percent sand and 1 to 29 percent silt plus clay, and had HgT concentrations ranging from 6.8 to 81 ng/g dry weight. A clay-silt fraction, sampled from material remaining in suspension after the sandy fraction settled for 15-20 minutes, contained mercury concentrations from 23 to 370 ng/g dry weight. Concentrations of MeHg were less than the detection limit (<0.001 ng/g dry weight) in 30 of 31 samples of the sandy fraction. In the suspended clay-silt fraction, MeHg was detected in 16 of 31 samples, in which it ranged in concentration from 0.04 (estimated) to 0.61 ng/g wet weight. Potential rates of mercury methylation and demethylation were evaluated in seven samples using radiotracer methods. Mercury methylation (MeHg production) potentials were generally low, ranging from less than 0.15 to about 1.6 ng/g/d (nanogram per gram of dry sediment per day). Mercury demethylation (MeHg degradation) potentials were moderately high, ranging from 1.0 to 2.2 ng/g/d. The ratio of methylation potential (MP) to demethylation potential (DP) ranged from less than 0.14 to about 1.4 (median = 0.24, mean = 0.44, number of samples = 7), suggesting that the potential for net production of MeHg in deep sediments is generally low. The MeHg production rates and MP/DP ratios were higher in the shallower interval in two of the three holes where two depth intervals were assessed, whereas the MeHg concentrations were higher in the shallower interval for all three holes. A similar spatial distribution was found for concentrations of solid-phase sulfide (measured as total reduced sulfur and likely representing iron-sulfide and iron-disulfide compounds), which were much higher in shallower samples (about 700 to about 2,100 nanomoles per gram, dry sediment) than in deeper samples (32 to 55 nanomoles per gram, dry sediment) in these three holes. If reduced sulfur compounds are oxidized to sulfate as a consequence of sediment disturbance, the activity of sulfate-reducing bacteria might be stimulated, causing a short-term increase in methylation of inorganic Hg(II) (divalent mercury).

California↗
USGS2007

Sedimentary rock-hosted Au deposits of the Dian-Qian-Gui area, Guizhou, and Yunnan Provinces, and Guangxi District, China

Sedimentary rock-hosted Au deposits in the Dian-Qian-Gui area in southwest China are hosted in Paleozoic and early Mesozoic sedimentary rocks along the southwest margin of the Yangtze (South China) Precambrian craton. Most deposits have characteristics similar to Carlin-type Au deposits and are spatially associated, on a regional scale, with deposits of coal, Sb, barite, As, Tl, and Hg. Sedimentary rock-hosted Au deposits are disseminated stratabound and(or) structurally controlled. The deposits have many similar characteristics, particularly mineralogy, geochemistry, host rock, and structural control. Most deposits are associated with structural domes, stratabound breccia bodies, unconformity surfaces or intense brittle-ductile deformation zones, such as the Youjiang fault system. Typical characteristics include impure carbonate rock or calcareous and carbonaceous host rock that contains disseminated pyrite, marcasite, and arsenopyrite-usually with ??m-sized Au, commonly in As-rich rims of pyrite and in disseminations. Late realgar, orpiment, stibnite, and Hg minerals are spatially associated with earlier forming sulfide minerals. Minor base-metal sulfides, such as galena, sphalerite, chalcopyrite, and Pb-Sb-As-sulphosalts also are present. The rocks locally are silicified and altered to sericite-clay (illite). Rocks and(or) stream-sediment geochemical signatures typically include elevated concentrations of As, Sb, Hg, Tl, and Ba. A general lack of igneous rocks in the Dian-Qian-Gui area implies non-pluton-related, ore forming processes. Some deposits contain evidence that sources of the metal may have originated in carbonaceous parts of the sedimentary pile or other sedimentary or volcanic horizons. This genetic process may be associated with formation and mobilization of petroleum and Hg in the region and may also be related to As-, Au-, and Tl-bearing coal horizons. Many deposits also contain textures and features indicative of strong structural control by tectonic domes or shear zones and also suggest syndeformational ore deposition, possibly related to the Youjiang fault system. Several sedimentary rock-hosted Au deposits in the Dian-Qian-Gui area also are of the red earth-type and Au grades have been concentrated and enhanced during episodes of deep weathering. ?? 2006 Elsevier B.V. All rights reserved.

Ore Geology Reviews↗
USGS1973

Geology and mineral resources of central Antioquia Department (Zone IIA), Colombia

This report summarizes the geology of an area of some 6000 square kilometers in the northern part of the Central Cordillera of the Colombian Andes. The area, in north-central Department of Antioquia, was mapped between 1964 and 1968 as part of the Inventario Minero Nacional (IMN) project. Mineral resources are summarized within a larger area, designated as subzone ILK of IMN Zone If, which comprises almost 22,000 sq. kin, including the area mapped geologically by IMN and additional areas mapped by other agencies. The oldest formation is a micaceous paragneiss of early Paleozoic or possibly late Precambrian age. A thick geosynclinal sedimentary series accumulated during the Paleozoic Era and became regionally metamorphosed to greenschist (locally amphibolite) facies during the Permian or early Triassic; these schists and gneisses are designated collectively as the Valdivia Group. The Permian(?) orogenic episode included intrusion of concordant syntectonic plutons, mostly of tonalitic composition. Rocks of unequivocal Triassic or Jurassic age are not recognized. The Cretaceous is well represented by both igneous and sedimentary assemblages. Eugeosynclinal alpine ophiolites comprising submarine basalt flows and numerous intrusions of gabbro and serpentinite are prominent in the Lower Cretaceous, together with flysch composed of marine shale and lesser sandstone and conglomerate. The Upper Cretaceous is represented along the west border of the mapped area by submarine basalt flows and pyroclastic rocks, locally Interbedded with fine-grained clastic sedimentary beds, and lenses of dark laminated chert, at least part of which is radiolarian. The Late Cretaceous was marked by an orogenic event that profoundly folded and faulted all rocks and in the Central Cordillera caused low-grade metamorphism, the overprint of which is hardly observable in pre-Cretaceous rocks elsewhere. The Late Cretaceous orogeny culminated with discordant intrusion of the epizonal tonalitic Antioquian batholith. Displacement along the great Romeral wrench fault may have begun in the Cretaceous. Plutonism continued into the Cenozoic, exemplified by the hornblende-diorite Sabanalarga pluton. Intermontane basins were filled with molasse derived from the erosion of adjacent highlands; Tertiary sedimentation in marshy areas included organic carboniferous matter subsequently converted to lignite or subbituminous coal. The Sabanalarga fault system originated in the Late Tertiary; intermittent displacement continued on the older wrench faults such as the Romeral. Epeirogenic uplift, which probably began in the Pliocene and continued through the Pleistocene and Holocene, brought on renewed erosion which has sculptured the mountains into their present form. Mineral resources in subzone IIA are varied but not of outstanding importance. Gold and silver mining, significant in past centuries, is minor today. Ferruginous laterite on serpentinite once considered as a potential source of iron ore is not economically exploitable. IMN has explored nickeliferous laterite at the extreme northwest corner of subzone IIA; this is a potential resource, exploitable only after exhaustion of the larger and richer nickel laterite deposit at Cerro Matoso, farther to the north and outside the boundaries of Zone If. Known deposits of mercury, chromium, manganese, and copper are small, with limited economic potential. Nonmetallic resources include raw materials for cement, including portland cement. Saprolite clay is widely used in making common red brick and tile, still a dominant construction material in all but the most modern multistory buildings. Aggregate materials are varied and abundant. Kaolin of good quality near La Union is important as a ceramic raw mineral filler. Tertiary subbituminous coal beds are an important energy resource in western subzone IIA, and have a good potential for greater development. Deposits of sodic feldspar, talc, decorative stone, and silica a

Open-File Report↗
USGS1954

Carnotite-bearing sandstone in Cedar Canyon, Slim Buttes, Harding County, South Dakota

Carnotite-bearing sandstone and clay have been found in the Chadron formation of the White River group of Oligocene age in the southern part of the Slim Buttes area, Harding County, S. Dak. Locally the mineralized sandstone contains as much as 0.23 percent uranium. The uranium and vanadium ions are believed to have been derived from the overlying mildly radioactive tuffaceous rocks of the Arikaree formation of Miocene age. Analyses of water from 26 springs issuing from the Chadron and Arikaree formations along the margins of Slim Buttes show uranium contents of as much as 200 parts per billion. Meteoric water percolating through tuffaceous rocks is thought to have brought uranium and other ions into environments in the Chadron formation that were physically and chemically favorable for the deposition of carnotite.

South Dakota↗
USGS1983

Major and trace elements in Mahogany zone oil shale in two cores from the Green River Formation, piceance basin, Colorado

The Parachute Creek Member of the lacustrine Green River Formation contains thick sequences of rich oil-shale. The richest sequence and the richest oil-shale bed occurring in the member are called the Mahogany zone and the Mahogany bed, respectively, and were deposited in ancient Lake Uinta. The name "Mahogany" is derived from the red-brown color imparted to the rock by its rich-kerogen content. Geochemical abundance and distribution of eight major and 18 trace elements were determined in the Mahogany zone sampled from two cores, U. S. Geological Survey core hole CR-2 and U. S. Bureau of Mines core hole O1-A (Figure 1). The oil shale from core hole CR-2 was deposited nearer the margin of Lake Uinta than oil shale from core hole O1-A. The major- and trace-element chemistry of the Mahogany zone from each of these two cores is compared using elemental abundances and Q-mode factor modeling. The results of chemical analyses of 44 CR-2 Mahogany samples and 76 O1-A Mahogany samples are summarized in Figure 2. The average geochemical abundances for shale (1) and black shale (2) are also plotted on Figure 2 for comparison. The elemental abundances in the samples from the two cores are similar for the majority of elements. Differences at the 95% probability level are higher concentrations of Ca, Cu, La, Ni, Sc and Zr in the samples from core hole CR-2 compared to samples from core hole O1-A and higher concentrations of As and Sr in samples from core hole O1-A compared to samples from core hole CR-2. These differences presumably reflect slight differences in depositional conditions or source material at the two sites. The Mahogany oil shale from the two cores has lower concentrations of most trace metals and higher concentrations of carbonate-related elements (Ca, Mg, Sr and Na) compared to the average shale and black shale. During deposition of the Mahogany oil shale, large quantities of carbonates were precipitated resulting in the enrichment of carbonate-related elements and dilution of most trace elements as pointed out in several previous studies. Q-mode factor modeling is a statistical method used to group samples on the basis of compositional similarities. Factor end-member samples are chosen by the model. All other sample compositions are represented by varying proportions of the factor end-members and grouped as to their highest proportion. The compositional similarities defined by the Q-mode model are helpful in understanding processes controlling multi-element distributions. The models for each core are essentially identical. A four-factor model explains 70% of the variance in the CR-2 data and 64% of the O1-A data (the average correlation coefficients are 0. 84 and 0. 80, respectively). Increasing the number of factors above 4 results in the addition of unique instead of common factors. Table I groups the elements based on high factor-loading scores (the amount of influence each element has in defining the model factors). Similar elemental associations are found in both cores. Elemental abundances are plotted as a function of core depth using a five-point weighted moving average of the original data to smooth the curve (Figure 3 and 4). The plots are grouped according to the four factors defined by the Q-mode models and show similar distributions for elements within the same factor. Factor 1 samples are rich in most trace metals. High oil yield and the presence of illite characterize the end-member samples for this factor (3, 4) suggesting that adsorption of metals onto clay particles or organic matter is controlling the distribution of the metals. Precipitation of some metals as sulfides is possible (5). Factor 2 samples are high in elements commonly associated with minerals of detrital or volcanogenic origin. Altered tuff beds and lenses are prevalent within the Mahogany zone. The CR-2 end-member samples for this factor contain analcime (3) which is an alteration product within the tuff beds of the Green River Formation. Th

Conference Paper↗
USGS2003

Historic mills and mill tailings as potential sources of contamination in and near the Humboldt River basin, northern Nevada

Reconnaissance field studies of 40 mining districts in and near the Humboldt River basin have identified 83 mills and associated tailings impoundments and several other kinds of mineral-processing facilities (smelters, mercury retorts, heap-leach pads) related to historic mining. The majority of the mills and tailings sites are not recorded in the literature. All tailings impoundments show evidence of substantial amounts of erosion. At least 11 tailings dams were breached by flood waters, carrying fluvial tailings 1 to 15 km down canyons and across alluvial fans. Most of the tailings sites are dry most of the year, but some are near streams. Tailings that are wet for part of the year do not appear to be reacting significantly with those waters because physical factors such as clay layers and hard-pan cement appear to limit permeability and release of metals to surface waters. The major impact of mill tailings on surface- water quality may be brief flushes of runoff during storm events that carry acid and metals released from soluble mineral crusts. Small ephemeral ponds and puddles that tend to collect in trenches and low areas on tailings impoundments tend to be acidic and extremely enriched in metals, in part through cycles of evaporation. Ponded water that is rich in salts and metals could be acutely toxic to unsuspecting animals. Rare extreme storms have the potential to cause catastrophic failure of tailings impoundments, carry away metals in stormwaters, and transport tailings as debris flows for 1 to 15 km. In most situations these stormwaters and transported tailings could impact wildlife but probably would impact few or no people or domes-tic water wells. Because all identified historic tailings sites are several kilometers or more from the Humboldt River and major tributaries, tailings probably have no measurable impact on water quality in the main stem of the Humboldt River.

Nevada↗
USGS2021

Long-term African dust delivery to the eastern Atlantic Ocean from the Sahara and Sahel regions: Evidence from Quaternary paleosols on the Canary Islands, Spain

Africa is the most important source of dust in the world today and dust storms from that continent frequently deposit sediment on the nearby Canary Islands. Many investigators have inferred African dust inputs to Canary Islands paleosols based only on the presence of quartz. However, some local rocks do contain this mineral, so quartz alone is insufficient proof of dust deposition. Further, it is not known whether the Sahara Desert or the Sahel region is more important as a dust source. We address these issues by study of sequences of Pleistocene aeolian sands on the islands of Lanzarote and Fuerteventura. Aeolian sands are composed mostly of marine carbonate minerals and locally derived volcanic minerals. They date from the early-middle Pleistocene to the Holocene. Trace element geochemistry shows that the soils formed from both locally derived basalt and African dust. Major element geochemistry and clay mineralogy indicate that dust additions to the Canary Islands likely come from both the Sahara and Sahel. Dust delivered from the Sahel indicates that droughts in that region have had a history extending through much of the Quaternary. Accretionary-inflationary profile development, from dust accretion, is evident in the upward growth of Canary Islands paleosols.

Quaternary Science Reviews↗
USGS2001

Widespread potential for microbial MTBE degradation in surface-water sediments

Microorganisms indigenous to stream and lake bed sediments, collected from 11 sites throughout the United States, demonstrated significant mineralization of the fuel oxygenate, methyl-tert-butyl ether (MTBE). Mineralization of [U-14C]MTBE to 14CO2 ranged from 15 to 66% over 50 days and did not differ significantly between sediments collected from MTBE contaminated sites and from sites with no history of MTBE exposure. This result suggests that even the microbial communities indigenous to newly contaminated surface water systems will exhibit some innate ability to attenuate MTBE under aerobic conditions. The magnitude of MTBE mineralization was related to the sediment grain size distribution. A pronounced, inverse correlation (p < 0.001; r2 = 0.73) was observed between the final recovery of 14CO2 and the percentage content of silt and clay sized grains (grain diameter < 0.125 mm). The results of this study indicate that the microorganisms that inhabit the bed sediments of streams and lakes can degrade MTBE efficiently and that this capability is widespread in the environment. Thus aerobic bed sediment microbial processes may provide a significant environmental sink for MTBE in surface water systems throughout the United States and may contribute to the reported transience of MTBE in some surface waters.

Environmental Science & Technology↗
USGS1995

Comparison of hydrothermal alteration of carboniferous carbonate and siliclastic rocks in the Valles caldera with outcrops from the Socorro caldera, New Mexico

Continental Scientific Drilling Program (CSDP) drill hole VC-2B [total depth 1761.7 m (5780 ft); maximum temperature 295 °C] was continuously cored through the Sulphur Springs hydrothermal system in the western ring-fracture zone of the 1.14 Ma Valles caldera. Among other units, the hole penetrated 760.2 m (2494.1 ft) of Paleozoic carbonate and siliciclastic strata underlying caldera fill and precaldera volcanic and epiclastic rocks. Comparison of the VC-2B Paleozoic rocks with corresponding lithologies within and around the 32.1 Ma Socorro caldera, 192 km ( 119 miles) to the south-southwest, provides insight into the variability of alteration responses to similar caldera-related hydrothermal regimes. The Pennsylvanian Madera Limestone and Sandia Formation from VC-2B preserve many of the sedimentological and diagenetic features observed in these units on a regional basis and where unaffected by high temperatures or hydrothermal activity. Micrites in these formations in VC-2B are generally altered and mineralized only where fractured or brecciated, that is, where hydrothermal solutions could invade carbonate rocks which were otherwise essentially impermeable. Alteration intensity (and correspondingly inferred paleopermeability) is only slightly higher in carbonate packstones and grainstones, low to intermediate in siltstones and claystones, and high in poorly cemented sandstones. Hydrothermal fracture-filling phases in these rocks comprise sericite (and phengite), chlorite, allanite, apatite, an unidentified zeolite and sphene in various combinations, locally with sphalerite, galena, pyrite and chalcopyrite. Terrigenous feldspars and clays are commonly altered to chlorite and seriate, and euhedral anhydrite “porphyroblasts” with minor chlorite occur in Sandia Formation siltstone. Fossils are typically unaltered, but the walls of some colonial bryozoans in the Madera Limestone are altered to the assemblage chlorite-sericite-epidote-allanite. La, Ce and Nd are present in an unidentified hydrothermal mineral occurring throughout much of the VC-2B Pennsylvanian sequence. Carboniferous carbonate and siliciclastic formations within and around the Socorro caldera show a similar style of alteration and mineralization to their Valles caldera counterparts, but by contrast locally host commercial, caldera-related, base-metal sulfide deposits. As in the Valles rocks, mineralization and alteration in those of the Socorro caldera were strongly controlled by porosity. Unless disrupted by fractures, breccias, or karst cavities ( not identified in Valles caldera drill holes), the rocks remained relatively unaltered. Where these features allowed ingress of mineralizing hydrothermal solutions, base-metal sulfides and rare-earth-element-bearing minerals were precipitated.

New Mexico↗
USGS2021

The trajectory of soil development and its relationship to soil carbon dynamics

It has been postulated that the amount of soil organic carbon (SOC) associated with soil minerals exhibits a threshold relationship in response to effective soil moisture (estimated as precipitation less evapotranspiration). To better characterize the role of moisture in influencing mechanisms of SOC storage during pedogenesis, we compare soils from two different chronosequence sites: the Santa Cruz and Mattole River marine terraces that together form a soil age-by-climate gradient (i.e., climo-chronosequence). Our results demonstrate how variation in the effective soil moisture may drive soil development along divergent pedogenic trajectories, resulting in variations in the form and depth distribution of secondary weathering products. In particular, the residual metals Fe and Al are directly related to the type of secondary minerals that accumulate during weathering, and these variations are coupled to differences in the storage and long-term preservation of SOC both within and between soils. Over time, these differences in soil development may lead to ‘pedogenic thresholds’ that further differentiate soil characteristics and influence SOC dynamics. In this case, the pedogenic threshold takes the form of clay-rich argillic horizons that once formed, inhibit aqueous transport, decouple shallow and deep soil environments, and potentially limit SOC inputs and increase microbial recycling in deep soils. Our data suggest argillic horizon development is favorable in the drier Santa Cruz soils, where kaolinite is the dominant secondary weathering product. In contrast, greater available moisture in soils of the Mattole chronosequence drive a different weathering trajectory characterized by the accumulation of more amorphous secondary minerals. As a result, the Mattole soils and do not exhibit argillic horizon development but are instead characterized by greater accumulation of SOC across all depths sampled. Overall, our results illustrate how the interaction of climate (i.e., moisture) and time may shape the trajectory of soil development and the dynamics of SOC storage and preservation.

California↗