USGS Science⌕ Search

FIND YOUR NEXT DISCOVERY

Results for “Scientific Reports”

Original records, connected by a shared subject.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

530 records · Page 3Linked to original sources
USGS2024

Three-dimensional geologic framework model of the Rio San Jose groundwater basin and adjacent areas, New Mexico

As part of a U.S. Geological Survey study in cooperation with the Bureau of Reclamation and the Pueblo of Acoma, New Mexico, and the Pueblo of Laguna, New Mexico, a digital three-dimensional geologic framework model was constructed for the Rio San Jose and its surface-water drainage basin in west-central New Mexico. This three-dimensional model defines the altitude, thickness, and extent of 18 geologic units for use in a regional numerical hydrologic model. The model included an undifferentiated Proterozoic basement layer, 13 consolidated Paleozoic and Mesozoic rock units, and 4 Cenozoic units. Model input data were compiled from published cross sections, well data, structure contour maps, selected geophysical data, and data derived from geologic maps and structural features in the study area. These data were used to construct faulted surfaces that represent the upper and lower subsurface geologic unit boundaries. The digital three-dimensional geologic framework model combines faults, the altitude of the tops of each geologic unit, and boundary lines depicting the subsurface extent of each geologic unit. The digital three-dimensional geologic model described in this report and the corresponding data release represents the generalized geometry of the subsurface geologic units; it reproduces with reasonable accuracy the input geologic data and is consistent with previously published subsurface conceptualizations of the region. The geologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

New Mexico↗
USGS2024

Mapping karst groundwater flow paths and delineating recharge areas for springs in the Little Sequatchie and Pryor Cove watersheds, Tennessee

The Little Sequatchie River and Pryor Cove Branch, in southern Tennessee, drain the eastern escarpment of the Cumberland Plateau to the Sequatchie River near the southern end of the Sequatchie Valley. The Little Sequatchie River is the largest tributary to the Sequatchie River by drainage area, covering over 120 square miles. The hydrology of the two drainage areas has been largely altered by karst processes, which has caused the majority of the streams to sink at the contact between the Mississippian Pennington Formation and the underlying Mississippian Bangor Limestone. The U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service and Tennessee Department of Environment and Conservation, initiated a study in 2021 to map the karst groundwater pathways in both watersheds in order to delineate recharge areas for several springs. One of these springs, Sequatchie Cave, represents a significant habitat for two Species of Greatest Conservation Need, the Glyphopsyche sequatchie (Sequatchie caddisfly) and the federally endangered Marstonia ogmorhaphe (royal marstonia). Springs and springflow-dominated streams in the Little Sequatchie River valley and Pryor Cove also provide water for agricultural practices and serve as a drinking water source for nearby communities. During the study, a total of 25 dye injections were conducted over eight rounds from January 2022 through March 2023. Dye traces from these injections helped to delineate recharge areas for six major springs, ranging from 7.3 to 65.2 square miles in area. The majority of the dye traces remained subsurface (from sinkpoint to recovery site) for long distances, with karst groundwater travelling nearly 8 miles before resurfacing. The dye traces also had rapid traveltimes, often travelling hundreds to thousands of feet per hour. The goal of this project was to provide scientific data related to karst groundwater pathways and spring recharge areas to aid State and Federal agencies in making informed decisions to protect and preserve this unique and vulnerable karst system.

Tennessee↗
USGS2026

Escherichia coli monitoring and assessment in 2022 and 2023 after beach restoration at Lake St. Clair Metropark Beach, Macomb County, Michigan

Lake St. Clair Metropark Beach in Michigan has a history of closures because of elevated Escherichia coli ( E. coli ) concentrations in its recreational waters. To reduce closures, restoration projects were implemented in 2021 to deter waterfowl from congregating on the beach. In this study, the U.S. Geological Survey, in cooperation with the Michigan Department of the Environment, Great Lakes, and Energy and in collaboration with Huron-Clinton Metroparks and the Macomb County Health Department, monitored E. coli from 2022–23 in surface water, shallow groundwater, and sediment at Lake St. Clair Metropark Beach. Results were compared to data from a prerestoration (2018–19) study. A significant decrease in daily geometric mean E. coli concentrations in surface water was observed postrestoration, but the number of high concentration events increased. This resulted in more frequent beach closures postrestoration. Surface-sediment E. coli concentrations significantly decreased after restoration, and waterfowl populations generally decreased from 2021 to 2023, suggesting that the deterrence measures could be influencing E. coli concentrations in surface sediments and surface water. Groundwater E. coli concentrations were orders of magnitude higher than those in surface water and revealed no change correlated with restoration. Seepage measurements indicated that groundwater occasionally discharges into surface water, potentially providing a transport mechanism for E. coli to reach the lake. Continued monitoring and consideration of environmental factors could help to better understand the beach system.

Michigan↗
USGS2025

Flood-inundation maps for Río de la Plata in and near Comerío, Puerto Rico, 2025

Digital flood-inundation maps for a 3.1-mile reach of Río de la Plata in and near Comerío, Puerto Rico, were created by the U.S. Geological Survey (USGS). Water-surface profiles were computed for the stream reach by using a one-dimensional steady-state step-backwater model. The model was calibrated to the current (2025) stage-streamflow relation (rating curve 11.0) for the USGS streamgage 50043800, Río de la Plata at Comerío, Puerto Rico. The resulting hydraulic model was then used to compute 16 water-surface profiles for water levels (flood stages) ranging from 10.00 to 40.00 feet at the streamgage and ranging from “action stage” to above “major flood stage” as reported by the National Weather Service. The 40.00-foot stage was selected because it exceeds the peak stage of 34.86 ft recorded during Hurricane Maria at the USGS streamgage 50043800, Río de Plata at Comerío, Puerto Rico. The simulated water-surface profiles were then used in combination with a digital elevation model derived from light detection and ranging data to map the inundated areas associated with each flood profile. The flood-inundation maps and the supporting hydraulic model produced by this study can be used by emergency managers and local officials to assess flood mitigation strategies and to define flood hazard areas to help protect life and property, to coordinate flood response activities such as evacuations and road closures, and to aid post-flood recovery efforts.

Comerio↗
USGS2024

Geologic map of the southern Stillwater Range, Nevada

The southern Stillwater Range in west-central Nevada contains the western part of the Oligocene Stillwater-Clan Alpine caldera complex, which extends about 55 kilometers (km) east from the west side of the Stillwater Range to the northwestern Desatoya Mountains. The complex consists of at least seven nested ignimbrite calderas and subjacent plutonic rocks emplaced into a complex basement composed of Mesozoic metasedimentary and metavolcanic rocks and Cretaceous granitic plutons. The calderas formed during large-volume (100s to greater than (>) 2,500 cubic kilometers [km 3 ]) eruptions of silicic ignimbrites between about 30.4 and 25.1 million years before present (Ma). The Job Canyon and Poco Canyon calderas and the western part of the much larger Elevenmile Canyon caldera, and their plutonic roots, are exposed in the southern Stillwater Range. There, the caldera complex was steeply tilted during large-magnitude crustal extension in the middle Miocene, and further exhumed during the late Miocene to Holocene Basin and Range extension that formed the modern Stillwater Range. This tilted crustal section affords an exceptional opportunity to view structural cross sections of ignimbrite calderas and their plutonic roots to paleodepths as much as 9–10 km.

Nevada↗
USGS2025

Bedrock geologic map of the Bellows Falls 7.5- x 15-minute quadrangle, Windham and Windsor Counties, Vermont, and Sullivan and Cheshire Counties, New Hampshire

Introduction The bedrock geology of the Bellows Falls 7.5- x 15-minute quadrangle, Vermont and New Hampshire, consists of polydeformed Ordovician to Devonian metasedimentary, metavolcanic, and metaplutonic rocks of the Connecticut Valley trough, Bronson Hill anticlinorium (or Bronson Hill terrane), and the Central Maine terrane. Previous work in this area includes a 1:62,500-scale published map and text (1946), State geologic maps of New Hampshire (1997) and Vermont (2011), and various maps and reports presented largely as parts of field trip guidebooks. A provisional open-file map of the geology of the Vermont part of the Bellows Falls 7.5- x 15-minute quadrangle, completed in 1997, is incorporated and revised on this map based on additional fieldwork. This study recognizes three major structural levels from west to east and from lowest to highest: (1) autochthonous rocks of the Connecticut Valley trough; (2) allochthonous rocks of the New Hampshire sequence and Bronson Hill arc in the Monroe thrust sheet (or nappe), including the Skitchewaug nappe; and (3) allochthonous rocks of the Fall Mountain thrust sheet or nappe.

New Hampshire, Vermont↗
USGS2025

A probabilistic assessment methodology for the evaluation of geologic energy storage capacity—Natural gas storage in depleted hydrocarbon reservoirs

The need for energy storage, particularly underground, where capacity and duration may far exceed battery storage technologies, is especially relevant given the increasing demands for reliable power alongside the development of intermittent renewable electricity sources. Geologic energy storage facilities already exist, and expanded use would enable storing gases such as methane and hydrogen. In 2018, a National Academies of Sciences, Engineering, and Medicine report, “Future Directions for the U.S. Geological Survey's Energy Resources Program,” recommended that the U.S. Geological Survey (USGS) prioritize assessing underground energy storage in geologic formations in the United States. The U.S. Geological Survey has since developed a methodology for assessing natural gas storage capacities in depleted hydrocarbon reservoirs on a national scale. The methodology introduced in this report prescribes three approaches for calculating gas storage capacity. This methodology relies on the availability of input data, including cumulative hydrocarbon production records, reservoir petrophysical properties, and reservoir pressure data. Assessment inputs can be obtained from public, State-level databases and propriety national-scale databases, although the use of analogs could be warranted for estimating input parameters. Probabilistic assessment results are aggregated to play, petroleum province, regional, and national scales. The steps defined in this report are demonstrated on the Michigan Basin Province, which includes the Mississippian Sandstone Gas Play and the Clinton Structural Play. This methodology could be used to systematically and consistently assess hydrocarbon plays and provinces for natural gas storage capacity across the United States.

Michigan↗
USGS2025

Geologic map of the Greater Antilles and Virgin Islands

Introduction The geologic map of the Greater Antilles and Virgin Islands is a compilation of information from the literature, integrated to provide a seamless geologic map of the region. This map was prepared to serve as a base map for a mineral resource assessment of the region. Several small-scale regional geologic maps of the region have been prepared in the past. This report supersedes an earlier version of the geologic map of the Greater Antilles and the Virgin Islands that was released as U.S. Geological Survey (USGS) Open-File Report 2019–1036. For this report, the regional geologic overview shown on sheet 1 covers Cuba; the island of Hispaniola, which includes Haiti and Dominican Republic; Jamaica; the Cayman Islands; Puerto Rico; and the U.S. and British Virgin Islands. Sheet 2 shows the geology of Cuba and Cayman Islands, sheet 3 the geology of Jamaica, sheet 4 the geology of Hispaniola, and sheet 5 the geology of Puerto Rico and Virgin Islands. Accompanying the maps are three tables: table 1 lists the map units (in alphabetical order by map-unit label), their ages, and the countries or territories in which they can be found. These are listed in alphabetical order for ease in locating unit names from the symbols on the maps. Table 2 is a list of sources for the geologic map compilation of Puerto Rico. Table 3 shows formations in the Devil’s Race Course Group of Jamaica.

Greater Antilles, Virgin Islands↗
USGS2025

Geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within Hays County, Texas

During 2023–24, the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority, revised a previous publication of the geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers that was completed during 2018 within Hays County, Texas. The purpose of this report is to present the updated geologic framework and hydrostratigraphy of the rocks containing the Edwards and Trinity aquifers in Hays County from field observations of the surficial expressions of the rocks. The report includes a detailed 1:24,000-scale hydrostratigraphic map with names and descriptions of the geologic framework and hydrostratigraphic units (HSUs) in the study area. The study includes updates to the interpretation of the Kainer Formation of the Edwards Group with the addition of a burrowed unit between the basal nodular and dolomitic members. Hydrostratigraphy was also updated with the addition of the Seco Pass HSU for the burrowed member of the Kainer Formation. The study also includes updates to the interpretation of the hydrostratigraphy of the Trinity aquifer with the addition of the cavernous HSU at the top of the upper zone of the Trinity aquifer and the Herff Falls HSU between the Bulverde and Rust HSUs of the middle zone of the Trinity aquifer. This updated report provides additional information about a complex aquifer system. The complexity in the aquifer system results from a combination of the original depositional history, bioturbation, development of primary and secondary porosity, postdepositional diagenesis, fracturing, and faulting.

Texas↗
USGS2026

Reconstructing the Quaternary depositional history using geologic mapping and three-dimensional modeling of the subsurface near Fort Morgan, northeastern Colorado

Centered on Fort Morgan, Colorado, this study is intended to build from previous work by adding a three-dimensional (3D) view of the subsurface to better understand the depositional history of Quaternary deposits. A 1:100,000 scale geologic map was made by combining previous geologic maps, regional soil maps, and recent field investigations. In addition to the geologic mapping, drill hole lithologic data from water wells and oil and gas exploration were compiled and lithologic units simplified to best represent the stratigraphy of the Quaternary deposits. From these subsurface data, a 3D subsurface model was constructed, trimmed at the surface by a digital elevation model, and a bedrock surface foundation gridded from drill hole data was added. The surface of the 3D model was then compared visually to the surficial geologic map. Cross sections were constructed from the 3D model and compared to site-specific drilling that was done as part of this project. Finally, the model was examined in detail to reconstruct the depositional history of the subsurface alluvial and eolian units. Alluvial and fluvial drainage basins exposed in the subsurface have a greater areal extent than the present-day narrow drainages. Older eolian sand in the subsurface tends to be interbedded with loess indicating coeval deposition. Holocene sand, both eroded from bedrock exposed at the surface north of the study area and reworked from the South Platte River, buries most of the interbedded older sand and loess.

Colorado↗
USGS2024

Substrate Enhancement Pilot Project—Monitoring summary and evaluation, Kootenai River, Idaho, 2012–22

To assess changes in substrate conditions and the efficacy of artificially placed substrates at select sites on the Kootenai River near Bonners Ferry, Idaho, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, completed repeat bathymetric, velocimetric, and underwater videography surveys. Collectively, three project sites throughout the Kootenai River make up the Substrate Enhancement Pilot Project (SEPP), an effort intended to improve spawning and egg incubation viability at locations identified to be aquatic habitat limited for the endangered Kootenai River white sturgeon (Acipenser transmontanus). Following the placement of coarse substrates at each site, bathymetric, velocimetric, and underwater videography data were collected from 2012 to 2022 to assess the role of deposition and erosion on maintaining suitable white sturgeon spawning and incubation substrates. Minimal erosion and deposition occurred at all Substrate Enhancement Pilot Project sites, according to interannual and intra-annual net volumetric changes between bathymetric surveys. Depending on the timing of bathymetric surveys relative to the annual peak streamflow conditions, isolated locations of deposition or erosion were observed at each site and the potential for deposition or erosion was supported by measured mean depth-averaged velocities. This study concluded that variability of deposition and scour were common at each site throughout the monitoring period and may be attributed to fluctuations in streamflow. Repeat bathymetric, underwater videography, and velocity mapping surveys were used to verify the interstitial spaces and surfaces of substrates at each SEPP site remained free of fine sediments for intervals longer than a year but were susceptible to deposition between high streamflow events.

Idaho↗
USGS2026

Water use permits as of July 2024 and reported water use near the North Unit of Theodore Roosevelt National Park, North Dakota, 1980–2023

Starting in the early 2000s, increasing oil and gas development in western North Dakota created a need for additional water resources from surface-water and groundwater sources near the North Unit of Theodore Roosevelt National Park. To summarize the use of water in that area, the U.S. Geological Survey, in cooperation with the National Park Service, developed a map of surface-water and groundwater resources, aquifers, and water-use diversions, and plotted water-use trends from 1980 to 2023. Reported water used from permits in the map area has more than doubled since 2020, increasing from about 750 acre-feet in 2020 to about 2,300 acre-feet in 2022 and 2,000 acre-feet in 2023. Surface water provided the primary source of reported water used for the study period with an average of about 410 acre-feet per year from 1980 through 2017 and about 1,330 acre-feet per year from 2018 through 2023. After 2011, groundwater sourced from the Little Missouri River, Tobacco Garden Creek, Fox Hills, Fort Union, and Dakota aquifers became a larger portion of total annual reported water use from permits in the map area. From 1980 through 2015, water use for irrigation averaged 86 percent of the total annual reported surface-water and groundwater use in the map area. Starting in 2011, however, industrial uses became a proportionally larger total use of water, and in 2015, became the highest reported volume of water use in the map area. From 2011 to 2023, industrial use designated for water depots increased from 50 acre-feet to about 1,370 acre-feet, accounting for about 70 percent of total reported water use in the map area in 2023.

North Dakota↗
USGS2026

Colored shaded-relief bathymetric and acoustic-backscatter maps of Jenkinson Lake with orthomosaic of the Sly Park Creek and Hazel Creek area, California

The Caldor Fire was ignited on August 14, 2021, and burned almost 222,000 acres (898 square kilometers) in forested terrain of the central and western Sierra Nevada, California. During the subsequent two months, the fire burned nearly all of Sly Park Creek watershed in El Dorado County. The El Dorado Irrigation District manages the water supply for the area using storage in Jenkinson Lake, a 1.6-kilometer- (1.0-mile-) wide and 3.6-kilometer- (2.2-mile-) long reservoir, located south of the town of Pollock Pines. Several weeks after the fire, the U.S. Geological Survey began investigations into post-fire landscape responses, including sediment yield, by measuring new sediment deposition in Jenkinson Lake. This study focused on the collection and processing of bathymetric and acoustic-backscatter data, as well as onshore aerial imagery in and around Jenkinson Lake, to support wildfire science after the Caldor Fire. A colored shaded-relief bathymetric map (sheet 1) and an acoustic backscatter map (sheet 2) show the lake floor morphology and backscatter intensities.

California↗
USGS2026

Continuous monitoring and temporal variability of fluorescence of dissolved organic matter in karst groundwater of the Edwards aquifer, south-central Texas, 2019–24

Widespread urbanization on the Edwards aquifer recharge zone in south-central Texas has prompted the development of new approaches and tools for evaluating the current and future status of water quality in the San Antonio and Barton Springs segments of the Edwards aquifer. The U.S. Geological Survey, in cooperation with the San Antonio Water System and the City of Austin, applied continuous monitoring of fluorescence of dissolved organic matter (fDOM) to characterize the sources and transport of dissolved organic matter and associated constituents in the Edwards aquifer. Continuous fDOM time-series data were adjusted using empirically derived temperature, turbidity, and inner-filter-effect correction factors prior to analysis and interpretation. Fully corrected fDOM time-series data from the study sites were evaluated for short- and long-term temporal variability in fDOM in the context of the hydrologic and climatic conditions that occurred during the 5-year study period to understand vulnerability of the aquifer to potential contaminants in recharge. Study results indicate that fDOM is an effective proxy for dissolved organic carbon that, in turn, is indicative of the influx of recent surface water and associated contaminants, and thus, aquifer vulnerability to those contaminants. Although other continuously monitored water-quality parameters provide insights into changes in water quality in response to varying hydrologic conditions, the quantitative relation between fDOM and dissolved organic carbon directly indicates the timing and magnitude of pulses of organic constituents derived from the land surface, whereas other water-quality parameters do not.

Texas↗
USGS2025

Hydraulic conductivity and transmissivity estimates from slug tests in wells within the Mississippi Alluvial Plain, Arkansas and Mississippi, 2020

During the spring and summer of 2020, the U.S. Geological Survey conducted single-well slug tests on selected observation wells within the Mississippi Alluvial Plain in Arkansas and Mississippi to estimate hydraulic conductivity and transmissivity values for the Mississippi River Valley alluvial and middle Claiborne aquifers. Well and aquifer data were collected from field measurements, well-construction reports, and published aquifer-thickness information. A total of 324 slug-in and slug-out tests were conducted on 48 wells by using mechanical slugs to displace the water column and submersible pressure transducers to record changes in water levels in the wells. Hydraulic conductivity of the aquifers in which the wells are screened was estimated by curve fitting the water-level-change data using aquifer test analysis software. Estimates of aquifer transmissivity were made by multiplying the estimated hydraulic conductivity value by the aquifer thickness at well locations. Mean hydraulic conductivity estimates for 44 observation wells screened in the Mississippi River Valley alluvial aquifer range from 3 to 401 feet per day, and mean transmissivity estimates range from 285 to 80,559 feet squared per day. Mean hydraulic conductivity estimates for four observation wells screened in units of the middle Claiborne aquifer range from 0.14 to 183 feet per day, and mean transmissivity estimates range from 55 to 67,913 feet squared per day. The results from these tests can be used to improve the understanding of water availability and groundwater migration, to refine groundwater models, and to ultimately provide stakeholders and decisionmakers better information for management of the groundwater resources within the Mississippi Alluvial Plain.

Arkansas, Mississippi↗
USGS2026

Streamflow, base-flow, and precipitation trends and simulated effects of groundwater withdrawals from the North Fork Red River aquifer on base flows upgradient from Lake Altus, western Oklahoma, 1980–2022

The U.S. Geological Survey, in cooperation with the Bureau of Reclamation, used five scenarios created from a previously published numerical groundwater-flow model (1980–2013) and historical streamflow records (1980–2022) to investigate the relation between groundwater withdrawals from the North Fork Red River aquifer and inflows to Lake Altus from the North Fork Red River in western Oklahoma. The five scenarios were (1) a scaled-equal-proportionate-share (EPS) groundwater-withdrawal scenario, (2) a study-area-scaled-reported groundwater-withdrawal scenario, (3) a zonal-scaled-reported groundwater-withdrawal scenario, (4) a historical drought-threshold scenario, and (5) a base-flow and evapotranspiration depletion scenario. For the scaled-EPS groundwater-withdrawal scenario, EPS groundwater withdrawals were often much higher than reported groundwater withdrawals and greatly decreased base flows for most scale factors. For the study-area-scaled-reported groundwater-withdrawal scenario, base flows were reduced more but by smaller percentages during wet periods than during dry periods when scaling simulated reported groundwater withdrawals. For the zonal-scaled-reported groundwater-withdrawal scenario, scaling simulated reported groundwater withdrawals within selected zones with more groundwater withdrawals did not always affect base flows more than scaling reported groundwater withdrawals within zones with less groundwater withdrawals. For the historical drought-threshold scenario, curtailing groundwater withdrawals at the drought thresholds increased annual base flows to Lake Altus by about 1,169 to 3,665 acre-feet. For the base-flow and evapotranspiration depletion scenario, the distance between a groundwater well and a stream was a major factor affecting base flow to the North Fork Red River when increasing groundwater withdrawals; however, spatially variable hydrologic properties and saturated-zone evapotranspiration could also affect the relation between base flows and groundwater withdrawals.

Oklahoma↗
USGS2025

Using the D-Claw software package to model lahars in the Middle Fork Nooksack River drainage and beyond, Mount Baker, Washington

Lahars, or volcanic mudflows, are the most hazardous eruption-related phenomena that will affect communities living along rivers that originate on Mount Baker. In the past 15,000 years, the largest lahars from Mount Baker have affected the Middle Fork Nooksack River drainage and beyond. Here we use the physics-based D-Claw software package to model nine lahar scenarios that are initiated as water-saturated landslides between Sherman Crater and the Roman Wall on the Mount Baker edifice and flow down the Middle Fork Nooksack River. The scenarios range in volume from 1 to 260 million cubic meters and have an initial hydraulic permeability from 10 −12 to 10 −10 meters squared. Model output includes data such as flow depth, velocity, runout distance, area inundated, arrival time, and sediment concentration as well as information that allows scientists to calculate other important hydrologic characteristics such as lahar discharge. These data are important to officials who have the responsibility to plan for, or take mitigation measures against, future Mount Baker lahars. To check the validity of the D-Claw results, we compare the scenarios to known geologic information. We also compare D-Claw results with empirical models that have been used in the past to determine potential inundation areas, runout distances, and arrival times. These comparisons highlight similarities and differences between empirical and physics-based models. We also present D-Claw scenario-based animations to help scientists, officials, and lay people alike to visualize how future lahars could affect communities.

Washington↗
USGS2026

Simulation of groundwater flow to evaluate hydrogeologic controls on a PFAS plume, Coakley Landfill Superfund site, Rockingham County, New Hampshire

Per- and polyfluoroalkyl substances (PFAS), including perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), have been detected at combined concentrations above 2,000 nanograms per liter (ng/L) at groundwater seep locations near the Coakley Landfill Superfund site, in North Hampton, New Hampshire. The landfill was active from 1972 to 1985. An impermeable cap was placed on the landfill in 1998. The adjacent area to the Coakley Landfill has many water supply wells, and transport of PFAS compounds to the wells is a concern. Fracture anisotropy in the underlying bedrock aquifer complicates the understanding of PFAS transport because groundwater preferentially travels along fractures that may not align with the prevailing groundwater flow direction. In 2018, the U.S. Environmental Protection Agency and the U.S. Geological Survey began an investigation of the groundwater flow from the Coakley Landfill site. This report describes the modification of a numerical groundwater-flow model for the local area around the Coakley Landfill and summarizes findings of the investigation. In addition, this report includes a brief description of PFOA and PFOS occurrence, a discussion of model construction, evaluation of model performance through calibration, and discussion of simulation results for two periods (before and after capping). Limitations are also discussed. Results show that simulated groundwater flow moves from the Coakley Landfill to the west and north. Advective transport modeling using particle tracking shows that groundwater from the landfill discharges primarily to streams to the west and north, and a small amount is transported to distal wells. Dilution of contaminants through advection and dispersion likely plays a role in whether PFAS compounds from the landfill will be detected above laboratory reporting levels at distal wells.

New Hampshire↗