SEARCH · USGS Science
Results for “Scientific Drilling”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
SUSTAIN drilling at Surtsey volcano, Iceland, tracks hydrothermal and microbiological interactions in basalt 50 years after eruption
The 2017 Surtsey Underwater volcanic System for Thermophiles, Alteration processes and INnovative concretes (SUSTAIN) drilling project at Surtsey volcano, sponsored in part by the International Continental Scientific Drilling Program (ICDP), provides precise observations of the hydrothermal, geochemical, geomagnetic, and microbiological changes that have occurred in basaltic tephra and minor intrusions since explosive and effusive eruptions produced the oceanic island in 1963–1967. Two vertically cored boreholes, to 152 and 192 m below the surface, were drilled using filtered, UV-sterilized seawater circulating fluid to minimize microbial contamination. These cores parallel a 181 m core drilled in 1979. Introductory investigations indicate changes in material properties and whole-rock compositions over the past 38 years. A Surtsey subsurface observatory installed to 181 m in one vertical borehole holds incubation experiments that monitor in situ mineralogical and microbial alteration processes at 25–124 ∘C. A third cored borehole, inclined 55∘ in a 264∘ azimuthal direction to 354 m measured depth, provides further insights into eruption processes, including the presence of a diatreme that extends at least 100 m into the seafloor beneath the Surtur crater. The SUSTAIN project provides the first time-lapse drilling record into a very young oceanic basaltic volcano over a range of temperatures, 25–141 ∘C from 1979 to 2017, and subaerial and submarine hydrothermal fluid compositions. Rigorous procedures undertaken during the drilling operation protected the sensitive environment of the Surtsey Natural Preserve.
Radiocarbon dating of silica sinter deposits in shallow drill cores from the Upper Geyser Basin, Yellowstone National Park
To explore the timing of hydrothermal activity at the Upper Geyser Basin (UGB) in Yellowstone National Park, we obtained seven new accelerator mass spectrometry (AMS) radiocarbon 14 C ages of carbonaceous material trapped within siliceous sinter. Five samples came from depths of 15–152 cm within the Y-1 well, and two samples were from well Y-7 (depths of 24 cm and 122 cm). These two wells, at Black Sand and Biscuit Basins, respectively, were drilled in 1967 as part of a scientific drilling program by the U.S. Geological Survey ( White et al., 1975 ). Even with samples as small as 15 g, we obtained sufficient carbonaceous material (a mixture of thermophilic mats, pollen, and charcoal) for the 14 C analyses. Apparent time of deposition ranged from 3775 ± 25 and 2910 ± 30 14 C years BP at the top of the cores to about 8000 years BP at the bottom. The dates are consistent with variable rates of sinter formation at individual sites within the UGB over the Holocene. On a basin-wide scale, though, these and other existing 14 C dates hint that hydrothermal activity at the UGB may have been continuous throughout the Holocene.
Petrographic observations on the Exmore breccia, ICDP-USGS drilling at Eyreville, Chesapeake Bay impact structure, USA
The International Continental Scientific Drilling Program (ICDP)-U.S. Geological Survey (USGS) Eyreville A and B drill cores sampled crater fill in the region of the crater moat, ??9 km to the NE of the center of the Chesapeake Bay impact structure, Virginia, USA. They provide a 953 m section (444-1397 m depth) of sedimentary clast breccia and intercalated sedimentary and crystalline megablocks knownas Exmore beds, deposited on top of the impactite sequence between 1397 and 1551 m depth. We petrographically investigated the sandy-clayey groundmass-dominated breccia, which resembles a diamictite ("Exmore breccia"), and which, in its lower parts, carries sedimentary and crystalline blocks. The entire breccia interval is characterizedby the presence of glauconite and bioclastic carbonate, which distinguishes the Exmore breccia from other sandy facies above and below in the stratigraphy. The sediment-clast breccia exhibits strong heterogeneity from sample to sample with respect to groundmass nature, e.g., clay versus sand content, as well as clast content, in general, and shocked clast content, in particular. There is a consistently signifi cantly larger macroscopic sedimentary to crystalline clast content. On the microscopic scale, the intersample sediment to crystalline clast ratios are quite variable. A very small component of shocked material, in the form of shock-deformed quartz, and to an even lesser degree feldspar, and somewhat more abundant but still relatively scarce shardshaped,altered melt particles, is present throughout the section. However, between ??458 and 469 m, and between 514 and 527 m depths, the abundance of such melt particlesis notably enhanced. These sections are also chemically distinct and relatively more mafic than the other parts of the Exmore breccia. It appears that from the time of deposition of the 527 m material, calming of the ocean occurred over the crater area as a result of abatement of resurge activity, so that ejecta from the plume abovethe crater could accumulate within the crater area to a larger degree. Deposition ofejecta fallout from the collapsing ejecta plume was terminated by the time of deposition of the 458 m material. This raises questions about the positioning of the exact upper contact of Exmore breccia to post-Exmore sediment (Chickahominy Formation), which is currently placed at 444 m depth and which possibly should be revisedto 458 m depth. Based on a signifi cant record of granite-derived material with shocked minerals, the shocked debris component seems to be largely derived from crystalline target rocks. This provides further evidence that the basement-derived material of the basal section of the Eyreville drill cores, which is essentially unshocked, is likely of an allochthonous nature and that the drilling did not intersect the actual crater floor. 76??W. ?? 2009 Geological Society of America.
Dipping reflectors in the Norwegian Sea—ODP Leg 104 drilling results: LEG 104 SCIENTIFIC PARTY
Ocean Drilling Program (ODP) Leg 104 successfully completed a number of deep drill holes on the Outer V0ring Plateau and the Vering Basin during July and August 1985 (Fig. 1; Eldholm, Thiede, Taylor et al. 1986). One of the principal objectives of the leg was to drill and sample a thick oceanward-dipping wedge of seismic reflectors, known to characterize much of the multichannel seismic (MCS) profile data recorded across ocean-continent transitions in the NE Atlantic north of 55°N. Elsewhere, these reflectors have previously been the target of deep drilling during Legs 48 and 81 of the International Phase of Ocean Drilling IPOD (Montadert, Roberts et al. 1979; Roberts, Schnitker et al. 1984). These efforts met with some success, sampling only the uppermost part of the sequence and identifying a series of tholeiitic lava flows. Over the Outer V~ring Plateau, a number of MCS profiles reveal a distinct change in seismic character at the base of the well-stratified dipping reflector sequence, where an irregular surface characterized by a band of low-frequency, high-amplitude reflectors occurs. This surface is referred to as K. Prior to Leg 104, therefore, relatively little was known regarding the variation in petrographic character of the flows at depth, their evolution and origin, and particularly the character of the material below the reflector sequence. A single deep drillhole (642E) successfully recovered a section through the
Scientific results of the Hydrate-01 Stratigraphic Test Well Program, Western Prudhoe Bay Unit, Alaska North Slope
The United States Department of Energy, the MH21-S Research Consortium of Japan, and the United States Geological Survey are collaborating to enable gas hydrate scientific drilling and extended-duration reservoir response testing on the Alaska North Slope. To feasibly execute such a test, a location is required that is accessible from existing roads and gravel pads and that can be occupied without disrupting ongoing industry operations. A review of potential locations meeting these criteria determined the likely occurrence of gas hydrate in two fine-grained marginal-marine sands of Tertiary age in the vicinity of the inactive “Kuparuk State 7-11-12” exploration pad in the western Prudhoe Bay Unit (PBU). Existing well and seismic data for that site were insufficient to preclude the potential for free gas occurrence within the deeper (and most prospective) target sand. Therefore, with support from the PBU Working Interest Owners, Alaska Department of Natural Resources, and Petrotechnical Resources Alaska, the Hydrate-01 Stratigraphic Test Well (STW) was drilled in December 2018 to confirm the suitability of the site for future gas hydrate scientific testing. The Hydrate-01 well was successfully drilled to −3290 ft (1003 m) subsea vertical depth at a bottom hole location of approximately 900 ft (∼275 m) east of the surface location. The drilling program featured acquisition of a full suite of logging while drilling data, the collection of side-wall pressure cores, and the installation of distributed temperature and distributed acoustic sensor fiber-optic cables. The log data acquired confirmed the occurrence of gas hydrate at high saturation in two target sands. Integrated evaluation of log and sidewall core data provide petrophysical and geomechanical property information that allow for potential reservoir response to depressurization to be simulated. The deeper “B1 sand” is deemed to be most favorable for reservoir response testing as a result of confirmed gas hydrate occurrence in sediments of high intrinsic permeability, location within 100 ft (30 m) of the base of gas hydrate stability, and minimal risk for direct communication with permeable water-bearing (hydrate-free) zones. The shallower “D1 sand” provides a secondary target that is differentiated by colder in situ temperatures and the interpreted direct hydraulic communication to a lower section of non-hydrate-bearing, water-saturated sand. The Hydrate-01 log data also confirm the occurrence of at least one sub-seismic fault in close proximity to the B1 sand reservoir. To better image the distribution of the gas-hydrate-bearing reservoir sections and associated faults, a three-dimensional (3D) vertical seismic profile was conducted in early 2019 using the distributed acoustic sensors installed as part of the Hydrate-01 STW completion. Detailed two-dimensional (2D) and 3D geologic models have been constructed to enable numerical simulations to inform the planning for potential future scientific tests of reservoir response to depressurization at the site.
The birds of DSDP leg 96
Leg 96 of the Deep-Sea Drilling Project (DSDP) was the final leg of the very successful first scientific drilling program. An unexpected, low-pressure system caused birds from the coastal areas of Texas and Louisiana to seek shelter on the drilling platform.
Density of basalt core from Hilo drill hole, Hawaii
Density measurements of 1600 samples of core from 889 to 3097 m depth below sea level in the Hawaii Scientific Drilling Program hole near Hilo, Hawaii show marked differences between the basaltic rock types and help define stratigraphy in the hole. Water-saturated densities of subaerial lava flows (occurring above 1079 m depth) have the broadest range because of the large density variation within a single lava flow. Water-saturated densities commonly range from 2.0 to 3.0 with an average of 2.55 ?? 0.24 g/cc. Dikes and sills range from 2.8 to 3.1 g/cc). Densities of hyaloclastite commonly range from 2.3 to 2.7, with an overall average of about 2.5 g/cc. The low-density of most hyaloclastite is due primarily to palagonitization of abundant glass and presence of secondary minerals in the interstices between fragments. Four principal zones of pillow lava, separated by hyaloclastite, occur in the drill core. The shallowest (1983-2136 m) is paradoxically the densest, averaging 3.01 ?? 0.10 g/cc. The second (2234-2470 m) is decidedly the lightest, averaging 2.67 ?? 0.13 g/cc. The third (2640-2790 m) and fourth (2918-bottom at 3097 m) are high, averaging 2.89 ?? 0.17 and 2.97 ?? 0.08 g/cc, respectively. The first pillow zone includes degassed pillows i.e. lava erupted on land that flowed into the sea. These pillows are poor in vesicles, because the subaerial, one-atmosphere vesicles were compressed when the flow descended to deeper water and higher pressure. The second (low-density, non-degassed) pillow zone is the most vesicle-rich, apparently because it was erupted subaqueously at a shallow depth. The higher densities of the third and fourth zones result from a low vesicularity of only a few percent and an olivine content averaging more than 5% for the third zone and about 10% for the fourth zone. The uppermost hyaloclastite extending about 400 m below the bottom of the subaerial basalt is poorly cemented and absorbs up to 6 wt% of water when immersed. Progressing downward the hyaloclastite absorbs less water and becomes better cemented. This change is apparently due to palagonitization of glass and addition of secondary minerals in the deeper older hyaloclastite, a process favored by the increase of temperature with depth. The cementation is largely complete at 1800 m depth where the temperature attains about 20??C. The zone of freshest, uncemented hyaloclastite represents the weakest rock in the drill hole and is a likely level for tectonic or landslide disruption. ?? 2001 Published by Elsevier Science B.V.
High-resolution seismic-reflection images across the ICDP-USGS Eyreville deep drilling site, Chesapeake Bay impact structure
The U.S. Geological Survey (USGS) acquired two 1.4-km-long, high-resolution (~5 m vertical resolution) seismic-reflection lines in 2006 that cross near the International Continental Scientific Drilling Program (ICDP)-USGS Eyreville deep drilling site located above the late Eocene Chesapeake Bay impact structure in Virginia, USA. Five-meter spacing of seismic sources and geophones produced high-resolution images of the subsurface adjacent to the 1766-m-depth Eyreville core holes. Analysis of these lines, in the context of the core hole stratigraphy, shows that moderate-amplitude, discontinuous, dipping reflections below ~527 m correlate with a variety of Chesapeake Bay impact structure sediment and rock breccias recovered in the cores. High-amplitude, continuous, subhorizontal reflections above ~527 m depth correlate with the uppermost part of the Chesapeake Bay impact structure crater-fill sediments and postimpact Eocene to Pleistocene sediments. Reflections with ~20-30 m of relief in the uppermost part of the crater-fill and lowermost part of the postimpact section suggest differential compaction of the crater-fill materials during early postimpact time. The top of the crater-fill section also shows ~20 m of relief that appears to represent an original synimpact surface. Truncation surfaces, locally dipping reflections, and depth variations in reflection amplitudes generally correlate with the lithostrati-graphic and sequence-stratigraphic units and contacts in the core. Seismic images show apparent postimpact paleochannels that include the first possible Miocene paleochannels in the Mid-Atlantic Coastal Plain. Broad downwarping in the postim-pact section unrelated to structures in the crater fill indicates postimpact sediment compaction.
EMD Gas Hydrates Committee annual report
Global research on the potential commercial viability of gas extraction from gas hydrates is continuing, predominantly in Asia and in the United States, where recent efforts have focused on the exploration and characterization of gas hydrate petroleum systems and conducting controlled production tests of gas hydrate deposits hosted in mostly sand-rich reservoir systems. In 2017, gas hydrate production testing was conducted in marine settings in the offshore of Japan and China. An additional test was conducted in the Shenhu region of the South China Sea in 2020 to further evaluate the effectiveness of various well completion technologies to produce gas from gas hydrates. Late in 2018, a research partnership led by the U.S. Department of Energy National Energy Technology Laboratory and the Japan Oil, Gas and Metals National Corporation established a new Alaska North Slope test site for an extended gas hydrate production pilot with the completion of a stratigraphic test well. With the successful completion of the Prudhoe Bay Unit Hydrate-01 stratigraphic test well, planning is now underway for drilling of three additional wells at the Alaska test site, which will include a geoscience data well and two production test wells. In 2019, the Government of India released the results of one of the most comprehensive gas hydrate scientific drilling investigations ever undertaken, the leadership of the Indian National Gas Hydrate Program Expedition 02 reported on the discovery of several significant gas hydrate accumulations that were considered suitable for future gas hydrate production testing. In September of 2019, the U.S. Geological Survey released a new assessment of the technically recoverable gas hydrate resources on the Alaska North Slope. In 2018, the University of Texas at Austin released a comprehensive report describing the operational and initial technical results of the UT-GOM2-1 Hydrate Pressure Coring Expedition, which drilled and partially cored two wells in Green Canyon Block 955 in the deepwater Gulf of Mexico. The results of these recently complete gas hydrate geologic and production studies have been further reviewed in this AAPG-EMD Gas Hydrate Committee report.
Tectonic erosion and consequent collapse of the Pacific margin of Costa Rica: Combined implications from ODP leg 170, seismic offshore data, and regional geology of the Nicoya Peninsula
The convergent margin off the Pacific coast of the Nicoya Peninsula of Costa Rica exhibits evidence for subduction erosion caused by the underthrusting Cocos plate. Critical evidence for efficacy of this process was recovered at the Ocean Drilling Program (ODP) drilling Site 1042 (Leg 170), positioned ???7 km landward of the Middle America trench axis off the Nicoya Peninsula. The primary drilling objective at this site was to identify the age and origin of a regionally extensive and prominent seismic discontinuity, the so-called base-of-slope sediment (BOSS) horizon or surface. The BOSS horizon, which can be traced landward from near the trench to the Nicoya coastal area and parallel to it for hundreds of kilometers, separates a low-velocity (??? 2.0-2.5 km s-1) sequence of slope sediment, from an underlying sequence of much higher-velocity (> 4-4.5 km s-1) rock. Site 1042 reached the acoustically defined BOSS horizon at a below sea level depth of ??? 3900 m and yielded a carbonate-cemented calcarenitic breccia of early-middle Miocene age. Sedimentological, geochemical, paleontological, and cement paragenesis data document that the breccia accumulated in a shallow water depositional environment. On the basis of coastal exposures, the BOSS horizon, as a margin-wide geologic interface, can be temporally and lithostratigraphically correlated to a regional angular unconformity. This unconformity, known as the Mal Pais unconformity, separates Neogene and younger shelf-to-littoral beds from the underlying mafic units of the Mesozoic Nicoya Complex and Cretaceous and early Tertiary sedimentary sequences. At Site 1042 it is inferred that tectonism caused the vertical subsidence of the early Neogene breccia from a shallow to a deep water setting. The Mal Pais unconformity of the BOSS horizon thus connects the rock fabric of the outermost part of margin to that of coastal Nicoya and implies that in the early Neogene the Nicoya shelf extended seaward to near the present trench axis. This circumstance requires that the early Neogene trench axis was at least 50 km seaward of where it is now located. The long-term effects of subduction erosion, similar to those described for the scientifically drilled Japan, Tonga, and Peru margins, best account for offshore and onshore evidence for a post-Paleogene history of crustal thinning and landward trench migration of Costa Rica's Pacific margin. During the past 16-17 Myr the calculated mass removal and landward migration rates are 34-36 km3 Myr-1 km-1 of margin, and 3 km Myr-1, respectively. These values are similar to those found for other Pacific margins dominated by nonaccretionary subduction zone processes.
A review of the exploration, discovery, and characterization of highly concentrated gas hydrate accumulations in coarse-grained reservoir systems along the Eastern Continental Margin of India
The analysis of 3-D seismic data has become one of the most powerful ways to identify sand-rich gas hydrate reservoir systems and to directly identify highly concentrated gas hydrate prospects. Scientific drilling programs have shown that the occurrence of highly concentrated gas hydrate accumulations in coarse-grained, sand-rich, reservoir systems has a significant impact on the physical properties of sediments, allowing gas hydrates to be “directly detected” by conventional seismic analysis techniques. One of the most diagnostic responses of a gas hydrate-bearing sand reservoir is that of a high-velocity sedimentary section and an associated high-amplitude seismic response with a reflection polarity matching that of the seafloor. Knowledge of this physical relationship guided the Indian National Gas Hydrate Program Expedition 02 (NGHP-02) in their pre-drill site review and selection effort along the eastern continental margin of India in 2016. Within the planning, operational and post-operational data analysis phases of the NGHP-02 Expedition, scientists relied heavily on the analyses of the (1) pre-expedition acquired 3-D seismic data from offshore India, (2) downhole logging data acquired during NGHP-02 and (3) core samples and data obtained from NGHP-02 conventional- and pressure-cores to identify gas hydrates and assess the geologic controls on the formation and stability of these accumulations. Data analysis has confirmed the presence of extensive sand-rich depositional systems throughout the deepwater portions of the Krishna-Godavari and Mahanadi Basins in the Bay of Bengal. Two areas of the Krishna-Godavari Basin contain substantial gas hydrate accumulations in sand-rich systems, representing candidate sites for future potential energy exploitation.
Comparison of hydrothermal alteration of carboniferous carbonate and siliclastic rocks in the Valles caldera with outcrops from the Socorro caldera, New Mexico
Continental Scientific Drilling Program (CSDP) drill hole VC-2B [total depth 1761.7 m (5780 ft); maximum temperature 295 °C] was continuously cored through the Sulphur Springs hydrothermal system in the western ring-fracture zone of the 1.14 Ma Valles caldera. Among other units, the hole penetrated 760.2 m (2494.1 ft) of Paleozoic carbonate and siliciclastic strata underlying caldera fill and precaldera volcanic and epiclastic rocks. Comparison of the VC-2B Paleozoic rocks with corresponding lithologies within and around the 32.1 Ma Socorro caldera, 192 km ( 119 miles) to the south-southwest, provides insight into the variability of alteration responses to similar caldera-related hydrothermal regimes. The Pennsylvanian Madera Limestone and Sandia Formation from VC-2B preserve many of the sedimentological and diagenetic features observed in these units on a regional basis and where unaffected by high temperatures or hydrothermal activity. Micrites in these formations in VC-2B are generally altered and mineralized only where fractured or brecciated, that is, where hydrothermal solutions could invade carbonate rocks which were otherwise essentially impermeable. Alteration intensity (and correspondingly inferred paleopermeability) is only slightly higher in carbonate packstones and grainstones, low to intermediate in siltstones and claystones, and high in poorly cemented sandstones. Hydrothermal fracture-filling phases in these rocks comprise sericite (and phengite), chlorite, allanite, apatite, an unidentified zeolite and sphene in various combinations, locally with sphalerite, galena, pyrite and chalcopyrite. Terrigenous feldspars and clays are commonly altered to chlorite and seriate, and euhedral anhydrite “porphyroblasts” with minor chlorite occur in Sandia Formation siltstone. Fossils are typically unaltered, but the walls of some colonial bryozoans in the Madera Limestone are altered to the assemblage chlorite-sericite-epidote-allanite. La, Ce and Nd are present in an unidentified hydrothermal mineral occurring throughout much of the VC-2B Pennsylvanian sequence. Carboniferous carbonate and siliciclastic formations within and around the Socorro caldera show a similar style of alteration and mineralization to their Valles caldera counterparts, but by contrast locally host commercial, caldera-related, base-metal sulfide deposits. As in the Valles rocks, mineralization and alteration in those of the Socorro caldera were strongly controlled by porosity. Unless disrupted by fractures, breccias, or karst cavities ( not identified in Valles caldera drill holes), the rocks remained relatively unaltered. Where these features allowed ingress of mineralizing hydrothermal solutions, base-metal sulfides and rare-earth-element-bearing minerals were precipitated.
Methane hydrates
Gas hydrate is a solid, naturally occurring substance consisting predominantly of methane gas and water. Recent scientific drilling programs in Japan, Canada, the United States, Korea and India have demonstrated that gas hydrate occurs broadly and in a variety of forms in shallow sediments of the outer continental shelves and in Arctic regions. Field, laboratory and numerical modelling studies conducted to date indicate that gas can be extracted from gas hydrates with existing production technologies, particularly for those deposits in which the gas hydrate exists as pore-filling grains at high saturation in sand-rich reservoirs. A series of regional resource assessments indicate that substantial volumes of gas hydrate likely exist in sand-rich deposits. Recent field programs in Japan, Canada and in the United States have demonstrated the technical viability of methane extraction from gas-hydrate-bearing sand reservoirs and have investigated a range of potential production scenarios. At present, basic reservoir depressurisation shows the greatest promise and can be conducted using primarily standard industry equipment and procedures. Depressurisation is expected to be the foundation of future production systems; additional processes, such as thermal stimulation, mechanical stimulation and chemical injection, will likely also be integrated as dictated by local geological and other conditions. An innovative carbon dioxide and methane swapping technology is also being studied as a method to produce gas from select gas hydrate deposits. In addition, substantial additional volumes of gas hydrate have been found in dense arrays of grain-displacing veins and nodules in fine-grained, clay-dominated sediments; however, to date, no field tests, and very limited numerical modelling, have been conducted with regard to the production potential of such accumulations. Work remains to further refine: (1) the marine resource volumes within potential accumulations that can be produced through exploratory drilling programs; (2) the tools for gas hydrate detection and characterisation from remote sensing data; (3) the details of gas hydrate reservoir production behaviour through additional, well-monitored and longer duration field tests and (4) the understanding of the potential environmental impacts of gas hydrate resource development. The results of future production tests, in the context of varying market and energy supply conditions around the globe, will be the key to determine the ultimate timing and scale of the commercial production of natural gas from gas hydrates.
Analysis of fractures intersecting Kahi Puka Well 1 and its relation to the growth of the island of Hawaii
As part of the Hawaii Scientific Drilling Project, Kahi Puka Well 1 penetrated about 275 m of Mauna Loa basalts overlying a sequence of Mauna Kea flow units as it was drilled and cored to a total depth of 1053 m below land surface. A borehole televiewer (BHTV) was run in most of the well in successive stages prior to casing in order to obtain magnetically oriented acoustic images of the borehole wall. A total of 283 individual fractures were identified from this log and characterized in terms of strike and dip. These data are divided into three vertical sections based upon age and volcanic source, and lower hemisphere stereographic plots identify two predominant, subparallel fracture subsets common to each section. Assuming that most of the steeply dipping fractures observed in the BHTV log are tensile features generated within basalt flows during deposition and cooling, this fracture information can be combined with models of the evolution of the island of Hawaii to investigate the depositional history of these Mauna Loa and Mauna Kea basalts over the past 400 kyr. The directions of high-angle fractures appear to be generally parallel to topography or to the coastline at the time of deposition, as is supported by surface mapping of modern flows. Consequently, an overall counterclockwise rotation of about 75?? in the strike of these fractures from the bottom to the top of the well represents a systematic change in depositional slope direction over time. We attribute the observed rotation in the orientations of the two predominant fracture subsets over the past 400 kyr to changes in the configurations of volcanic sources during shield building and to the structural interference of adjacent volcanoes that produces shifts in topographic patterns.
Geophysics at Katmai: Geophysical expedition to Novarupta Volcano, Katmai National Park, Alaska
The great eruption of 1912 in the Aleutian Range of Alaska (Figure 1) is exceptional for both its size and relative simplicity. It was the largest eruption of this century and the largest rhyolitic outburst in almost 20 centuries. The 60-hour, 30-km 3 (ejecta volume) eruption produced extensive fallout deposits, an ash-flow sheet that gave rise to the Valley of Ten Thousand Smokes, and the 3-km-diameter Mt. Katmai caldera. Because magma reached the surface through uniform nonvolcanic basement and the vent underwent little or no collapse (unusual for such a large event), the site provides an ideal target for surface geophysical and subsurface coring exploration of structures and conditions produced by explosive volcanism [Panel on Volcanic Studies at Katmai, 1989]. A project to investigate upper crustal magmatic processes at Katmai is part of the U.S. Continental Scientific Drilling Program [Eichelberger and Hildreth, 1986]. The surface studies phase of this project was undertaken last summer and preliminary results are now emerging.
Did the Aleutian Basin form by plate capture or backarc basin opening?
The origin of the Aleutian Basin is unresolved because its crust is deeply buried beneath sediments. It has been interpreted as forming in the Eocene when the Beringian convergent margin jumped seaward to south of the Aleutian arc, thereby capturing a large sector of Cretaceous Pacific crust. Alternatively, it may have formed by backarc spreading. We present new magnetic and seismic reflection data compilations and review other pertinent data to evaluate these two possibilities. Arguments for entrapment are: 1) Palaeomagnetic and geologic data document that the Aleutian arc formed approximately in place and as a seaward, on-strike continuation of the Alaska Peninsula; 2) basin-central spreading anomalies trend N-S, normal to the Aleutian arc and exhibit amplitudes and lengths typically formed at mid-ocean ridges; 3) seismic reflection profiles document that cross-basin depositional sequences are like those expected of filling a fixed-width basin. Arguments for a backarc spreading origin include: 1) The perpendicular orientation of magnetic anomalies in the Aleutian Basin and the northern Pacific Plate suggest different origins; 2) the sub-parallel orientation of Aleutian Basin spreading magnetic fabric and Palaeogene rift basins on the Bering Shelf suggest a common extensional regime; 3) thinner continental crust beneath outer-shelf basins is consistent with extension; 4) lineated magnetic fabrics on the margins of the basin are similar to early rifting magnetic fabrics found in other backarc basins; 5) basin heat flow is consistent with Palaeogene seafloor spreading; 6) its marginal basin setting is analogous to marginal basins elsewhere that formed by extension and seafloor spreading, not entrapment; and 7) entrapment requires formation of the Aleutian subduction zone by transference, a mode of subduction initiation that has not yet been documented. We present evidence for both interpretations and underscore the need for continued data collection (e.g. scientific drilling) to test competing hypotheses. Similar approaches may be useful for understanding thickly sedimented marginal basins elsewhere.