USGS Science⌕ Search

SEARCH · USGS Science

Results for “New Mexico Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2018

Geologic map of the San Antonio Mountain area, northern New Mexico and southern Colorado

The geologic map of the San Antonio Mountain area in northern New Mexico and southern Colorado is located along the west-central part of the San Luis Valley. The San Luis Valley is the geomorphic expression of the San Luis Basin, an extensional basin associated with the northern Rio Grande rift. Deposits within the map area record volcanic, sedimentary, and tectonic processes over the last ~33 million years. Oldest exposed deposits include Oligocene volcanic rocks associated with the southeast San Juan Mountains locus of volcanism within the Southern Rocky Mountains volcanic field. Overlying deposits of the Southern Rocky Mountains volcanic field are volcaniclastic sedimentary rocks interbedded with predominantly basaltic lava flows of Oligocene to Miocene age. Basalt to rhyolite volcanic rocks of the Pliocene to Pleistocene Taos Plateau volcanic field unconformably overlie Oligocene to Miocene volcanic and sedimentary deposits. Superposed on the Tertiary deposits are Pleistocene to Holocene alluvial and colluvial deposits. North- to northwest-trending faults displace rocks within the map area. Magnitude of deformation is broadly correlative with age of the deposits inasmuch as Oligocene to Miocene rocks display a greater degree of fault displacement and east tilting than Pliocene volcanic rocks. Within the map area, faults displace Oligocene to Miocene deposits 10–30 meters with generally down-to-west offset, and the units dip eastward 3–7 degrees. Pliocene volcanic rocks exhibit shallower eastward dips inferred primarily from the slope of upper lava flow surfaces that dip eastward from 1–3 degrees and lava flows are generally displaced less than 5 meters.

Colorado, New Mexico↗
USGS2002

Simulation of Ground-Water Flow in the Middle Rio Grande Basin Between Cochiti and San Acacia, New Mexico

This report describes a three-dimensional, finite difference, ground-water-flow model of the Santa Fe Group aquifer system within the Middle Rio Grande Basin between Cochiti and San Acacia, New Mexico. The aquifer system is composed of the Santa Fe Group of middle Tertiary to Quaternary age and post-Santa Fe Group valley and basin-fill deposits of Quaternary age. Population increases in the basin since the 1940's have caused dramatic increases in ground-water withdrawals from the aquifer system, resulting in large ground-water-level declines. Because the Rio Grande is hydraulically connected to the aquifer system, these ground-water withdrawals have also decreased flow in the Rio Grande. Concern about water resources in the basin led to the development of a research plan for the basin focused on the hydrologic interaction of ground water and surface water (McAda, D.P., 1996, Plan of study to quantify the hydrologic relation between the Rio Grande and the Santa Fe Group aquifer system near Albuquerque, central New Mexico: U.S. Geological Survey Water-Resources Investigations Report 96-4006, 58 p.). A multiyear research effort followed, funded and conducted by the U.S. Geological Survey and other agencies (Bartolino, J.R., and Cole, J.C., 2002, Ground-water resources of the Middle Rio Grande Basin, New Mexico: U.S. Geological Survey Circular 1222, 132 p.). The modeling work described in this report incorporates the results of much of this work and is the culmination of this multiyear study. The purpose of the model is (1) to integrate the components of the ground-water-flow system, including the hydrologic interaction between the surface-water systems in the basin, to better understand the geohydrology of the basin and (2) to provide a tool to help water managers plan for and administer the use of basin water resources. The aquifer system is represented by nine model layers extending from the water table to the pre-Santa Fe Group basement rocks, as much as 9,000 feet below the NGVD 29. The horizontal grid contains 156 rows and 80 columns, each spaced 3,281 feet (1 kilometer) apart. The model simulates predevelopment steady-state conditions and historical transient conditions from 1900 to March 2000 in 1 steady-state and 52 historical stress periods. Average annual conditions are simulated prior to 1990, and seasonal (winter and irrigation season) conditions are simulated from 1990 to March 2000. The model simulates mountain-front, tributary, and subsurface recharge; canal, irrigation, and septic-field seepage; and ground-water withdrawal as specified-flow boundaries. The model simulates the Rio Grande, riverside drains, Jemez River, Jemez Canyon Reservoir, Cochiti Lake, riparian evapotranspiration, and interior drains as head-dependent flow boundaries. Hydrologic properties representing the Santa Fe Group aquifer system in the ground-water-flow model are horizontal hydraulic conductivity, vertical hydraulic conductivity, specific storage, and specific yield. Variable horizontal anisotropy is applied to the model so that hydraulic conductivity in the north-south direction (along model columns) is greater than hydraulic conductivity in the east-west direction (along model rows) over much of the model. This pattern of horizontal anisotropy was simulated to reflect the generally north-south orientation of faulting over much of the modeled area. With variable horizontal anisotropy, horizontal hydraulic conductivities in the model range from 0.05 to 60 feet per day. Vertical hydraulic conductivity is specified in the model as a horizontal to vertical anisotropy ratio (calculated to be 150:1 in the model) multiplied by the horizontal hydraulic conductivity along rows. Specific storage was estimated to be 2 x 10-6 per foot in the model. Specific yield was estimated to be 0.2 (dimensionless). A ground-water-flow model is a tool that can integrate the complex interactions of hydrologic boundary conditions, aquifer materials

Water-Resources Investigations Report↗
USGS1980

Bibliography of geology and hydrology, southwestern New Mexico

The southwestern part of New Mexico is recognized as a source of abundant and varied natural resources. This bibliography of over 2,700 references concerned with geology, hydrology, chemistry, and geography has been compiled to assist physical science researchers in their study and development of this region.

New Mexico↗
USGS1979

Bibliography of geology and hydrology, eastern New Mexico

The High Plains of the eastern New Mexico region are recognized as an abundant and varied source of natural resources. The bibliography of over 1,900 references concerned with geology, hydrology, chemistry, and geography has been compiled to assist physical science researchers in their study of this region. (Kosco-USGS)

Water-Resources Investigations Report↗
USGS1984

Seismic refraction studies in the San Juan Basin, Northwest New Mexico

The U.S. Geological Survey is studying some of the features of the earth's crust in the San Juan Basin region, northwest New Mexico. As a part of this study seismic refraction-reflection measurements were made in and around the basin using explosions and earthquakes as energy sources. Record sections and traveltime tables were derived from the measurements.

Open-File Report↗
USGS1869

Preliminary Field Report of the United States Geological Survey of Colorado and New Mexico

SIR : In accordance with your instructions dated Washington, April 1, 1869, I have the honor to transmit my preliminary field report of the United States geological survey of Colorado and New Mexico, conducted by me, under your direction, during the past season. A portion of your instructions is as follows : “You will proceed to the field of your labors as soon as the necessary arrangements can be made and the season will permit, and your attention will be especially directed to the geological, mineralogical and agricultural resources of the Territories herein designated; you will be required to ascertain the age, order of succession, relative position, dip, and comparative thickness of the different strata and geological formations, and examine with care all the beds, veins, and other deposits, of ores, coals, clays, marls, peat, and other mineral substances, as well as the fossil remains of the different formations; and you will also make full collections in geology, mineralogy, and paleontology, to illustrate your notes taken in the field.”

Colorado, New Mexico↗
USGS2012

Geologic framework, regional aquifer properties (1940s-2009), and spring, creek, and seep properties (2009-10) of the upper San Mateo Creek Basin near Mount Taylor, New Mexico

The U.S. Geological Survey, in cooperation with the U.S. Forest Service, examined the geologic framework, regional aquifer properties, and spring, creek, and seep properties of the upper San Mateo Creek Basin near Mount Taylor, which contains areas proposed for exploratory drilling and possible uranium mining on U.S. Forest Service land. The geologic structure of the region was formed from uplift of the Zuni Mountains during the Laramide Orogeny and the Neogene volcanism associated with the Mount Taylor Volcanic Field. Within this structural context, numerous aquifers are present in various Paleozoic and Mesozoic sedimentary formations and the Quaternary alluvium. The distribution of the aquifers is spatially variable because of the dip of the formations and erosion that produced the current landscape configuration where older formations have been exhumed closer to the Zuni Mountains. Many of the alluvial deposits and formations that contain groundwater likely are hydraulically connected because of the solid-matrix properties, such as substantive porosity, but shale layers such as those found in the Mancos Formation and Chinle Group likely restrict vertical flow. Existing water-level data indicate topologically downgradient flow in the Quaternary alluvium and indiscernible general flow patterns in the lower aquifers. According to previously published material and the geologic structure of the aquifers, the flow direction in the lower aquifers likely is in the opposite direction compared to the alluvium aquifer. Groundwater within the Chinle Group is known to be confined, which may allow upward migration of water into the Morrison Formation; however, confining layers within the Chinle Group likely retard upward leakage. Groundwater was sodium-bicarbonate/sulfate dominant or mixed cation-mixed anion with some calcium/bicarbonate water in the study area. The presence of the reduction/oxidation-sensitive elements iron and manganese in groundwater indicates reducing conditions at some time or in some location(s) in most aquifers. Frequent detections of zinc in the alluvium aquifer may represent anthropogenic influences such as mining. Along the mesas in the upper San Mateo Creek Basin, springs that form various creeks, including El Rito and San Mateo Creeks, discharge from the basalt-cap layer and the upper Cretaceous sedimentary layers. Streamflow in El Rito and San Mateo Creeks flows down steep gradients near the mesas sustained by groundwater discharges, and this streamflow transitions to shallow groundwater contained within the valley alluvium through infiltration where the subsequent groundwater is restricted from downward migration by the shaly Menefee Formation. This shallow groundwater reemerges at seeps where the land surface has been eroded below the groundwater level. Spring- and creek-water samples contained small amounts of dissolved solutes, and seep water contained substantially larger amounts of dissolved solutes. The pH of water within the creeks was neutral to alkaline, and all locations exhibited well-oxygenated conditions, although typically at substantially less than saturated levels. Changes in the stable-isotope ratios of water between spring and summer samples indicate differences in source-water inputs that likely pertain to seasonal recharge sources. Results of the water-isotope analysis and geochemical modeling indicate little evaporation and chemical weathering at the spring and creek sites but stronger evaporation and chemical weathering by the time the water reaches the seep locations in the center of the upper San Mateo Creek Basin.

New Mexico↗
USGS2014

Geology and total petroleum systems of the Paradox Basin, Utah, Colorado, New Mexico, and Arizona

The geological model for the development of the Total Petroleum Systems (TPSs) within the Paradox Basin formed the foundation of the recent U.S. Geological Survey assessment of undiscovered, technically recoverable resources in the basin. Five TPSs were defined, of which three have known production and two are hypothetical. These TPSs are based on geologic elements of the basin and the potential development of Precambrian, Devonian, Pennsylvanian, Permian-Mississippian, and Cretaceous source rock intervals. The most studied source intervals are the Pennsylvanian black shales that were deposited during relative high stands in an otherwise evaporitic basin. These black shales are the source for most of the discovered hydrocarbons in the Paradox Basin. A second oil type can be traced to either a Mississippian or Permian source rock to the west, and therefore requires long-distance migration to explain its presence in the basin. Upper Cretaceous continental to nearshore-marine sandstones are interbedded with coal beds that have recognized coalbed methane potential. Precambrian and Devonian TPSs are considered hypothetical, as both are known to have organic-rich intervals, but no discovered hydrocarbons have been definitively typed back to either of these units.

Arizona, Colorado, New Mexico, Utah↗
USGS1943

Geology of the Cimarron Range, New Mexico

In north-central New Mexico the rugged Cimarron Range marks the eastern margin of the Southern Rocky Mountains, abruptly rising more than 5000 feet above the adjacent Great Plains. Structurally the range is a northward-plunging anticline with a core of pre-Cambrian crystalline rocks. Faulting along the eastern and western margins of the anticline separates the mountains from the Great Plains and the Moreno Valley. North of Cimarron Canyon the anticline plunges beneath the Tertiary sediments of the Raton Coal Basin. To the south the structure is obscured by the basaltic flows of the Ocaté Mesa. Upturned Paleozoic to Tertiary sedimentary rocks crop out along the eastern and northern margin of the anticlinal uplift. Regional relations are obscured by extensive Tertiary intrusions in the northern portion of the area and by the lava flows to the south. In the valley of Rayado Creek a volcanic plug which fed some of the lava flows has been exposed by erosion. In this region there is evidence for a Mid-Tertiary surface of low relief in the central portion of the mountains, a later lava-capped surface believed to be the equivalent of the Broad Valley Stage, the surface of the Park Plateau, and the Ocate Mesa. Three well-developed gravel-capped Pleistocene pediment surfaces extend steplike from the mountain front into the Great Plains. Both structurally and topographically the Cimarron Range is similar to the Colorado Front Range. An attempt is made to reconstruct the geologic history of the Cimarron Range and to fit it into the broader story of the development of the Southern Rocky Mountains in New Mexico. © 1943 Geological Society of America.

New Mexico↗
USGS2012

Assessment of remaining recoverable oil in selected major oil fields of the Permian Basin, Texas and New Mexico

The U.S. Geological Survey (USGS) recently completed an estimate of technically recoverable, conventional oil in selected oil fields in the Permian Basin in west Texas and southeastern New Mexico. The mean total volume of potential additional oil resources that might be added using improved oil-recovery technologies was estimated to be about 2.7 billion barrels of oil.

New Mexico;Texas↗
USGS1989

Geologic map of the Latir Volcanic Field and adjacent areas, northern New Mexico

This map was first published as a printed edition in 1989. The geologic data have now been captured digitally and are presented here along with images of the printed map sheet and component parts as PDF files. This map encompasses all or parts of ten 7.5 minute quadrangles in the Taos Range of the Sangre de Cristo Mountains in northern New Mexico. Geologic mapping was initiated in this area by the U.S. Geological Survey in response to its mandate under the Wilderness Act of 1964 to evaluate the mineral resource potential of the Latir and Wheeler Peak Wildernesses and the Columbine-Hondo Wilderness Study Area in the Carson National Forest. The mapping was later extended to adjacent areas in order to better understand the regional geology and geologic history of the range. The present map focuses on the early Tertiary (largely Oligocene) Latir Volcanic Field and plutonic rocks associated with it. The basement rocks in the map area are Paleoproterozic amphibolite-facies metasedimentary and metavolcanic rocks intruded by large bodies of quartz monzonite, granodiorite and gabbro dated at between 1,750 and 1,690 Ma. The basement rocks are locally overlain by Mississippian limestone or by Pennsylvanian and Permian redbeds. The basement rocks were thrust eastward across a thick section of similar late Paleozoic rocks along low-angle faults during the Laramide Orogeny. Post-Laramide erosion largely removed the sedimentary cover from the basement rocks and reduced the topography to a low-relief surface locally overlain by scattered lenses of Eocene to Oligocene shale, sandstone, and conglomerate. It was on this surface that the earliest rocks of the Latir Volcanic Field were deposited, beginning in the Oligocene, about 30 Ma. The early volcanic rocks comprise a thick sequence of andesite, dacite, and minor rhyolite, deposited as flows, breccia, and volcaniclastic sediments from numerous local volcanic centers; thin layers of rhyolite tuff are from distant eruptions, some probably in the San Juan Mountains. These volcanic rocks probably record early growth of an upper-crustal batholith. At 25 Ma enormous eruptions of peralkaline rhyolite ash-flow tuff were accompanied by collapse of the roof of the growing batholith to form the Questa Caldera, a volcanic depression at least 14 km across. The ash flows traveled for tens of kilometers from the caldera rims to form a widespread sheet of densely welded tuff; ash also fell back to fill the subsiding caldera depression. Concurrent extension along northwest-trending faults segmented the volcanic edifice and rotated the originally sub-horizontal layers, so that some are nearly vertical. Formation of the caldera was accompanied by further batholith growth, involving intrusion of large plutons of granite, granodiorite, and related rocks into both caldera fill and the adjacent rocks, including both the earlier volcanic rocks and the basement rocks. The large molybdenum deposit along the Red River east of Questa is related to the emplacement of one of these late granitic plutons. Intrusive activity continued into the Miocene. Development of the Rio Grande Rift beginning at about 15 Ma was accompanied by development of the north-south trending normal faults along the western foot of the Taos Range. The rift is filled with thousands of meters of clastic sediments interleaved with basalt flows, some as young as 3.6 Ma. The bounding faults of the rift cut the Questa Caldera so that the western part of the original structure is now deeply buried beneath the rift fill.

New Mexico↗
USGS2005

Questa baseline and pre-mining ground-water quality investigation. 14. Interpretation of ground-water geochemistry in catchments other than the Straight Creek catchment, Red River Valley, Taos County, New Mexico, 2002-2003

The U.S. Geological Survey, in cooperation with the New Mexico Environment Department, is investigating the pre-mining ground-water chemistry at the Molycorp molybdenum mine in the Red River Valley, New Mexico. The primary approach is to determine the processes controlling ground-water chemistry at an unmined, off-site but proximal analog. The Straight Creek catchment, chosen for this purpose, consists of the same Tertiary-age quartz-sericite-pyrite altered andesite and rhyolitic volcanics as the mine site. Straight Creek is about 5 kilometers east of the eastern boundary of the mine site. Both Straight Creek and the mine site are at approximately the same altitude, face south, and have the same climatic conditions. Thirteen wells in the proximal analog drainage catchment were sampled for ground-water chemistry. Eleven wells were installed for this study and two existing wells at the Advanced Waste-Water Treatment (AWWT) facility were included in this study. Eight wells were sampled outside the Straight Creek catchment: one each in the Hansen, Hottentot, and La Bobita debris fans, four in a well cluster in upper Capulin Canyon (three in alluvial deposits and one in bedrock), and an existing well at the U.S. Forest Service Questa Ranger Station in Red River alluvial deposits. Two surface waters from the Hansen Creek catchment and two from the Hottentot drainage catchment also were sampled for comparison to ground-water compositions. In this report, these samples are evaluated to determine if the geochemical interpretations from the Straight Creek ground-water geochemistry could be extended to other ground waters in the Red River Valley , including the mine site. Total-recoverable major cations and trace metals and dissolved major cations, selected trace metals, anions, alkalinity; and iron-redox species were determined for all surface- and ground-water samples. Rare-earth elements and low-level As, Bi, Mo, Rb, Re, Sb, Se, Te, Th, U, Tl, V, W, Y, and Zr were determined on selected samples. Dissolved organic carbon (DOC), mercury, sulfate stable isotope composition (δ 34 S and δ 18 O of sulfate), stable isotope composition of water (δ 2 H and δ 18 O of water) were measured for selected samples. Chlorofluorocarbons (CFC) and 3 He and 3 H were measured for age dating on selected samples. Linear regressions from the Straight Creek ground-water data were used to compare ground-water chemistry trends in non-Straight Creek ground waters with Straight Creek alluvial ground-water chemistry dilution trends. Most of the solute trends for the ground waters are similar to those for Straight Creek but there are some notable exceptions. In lithologies that contain substantial pyrite mineralization, acid waters form with similar chemistries to those in Straight Creek and all the waters tend to be calcium-sulfate type. Hottentot ground waters contain substantially lower calcium concentrations relative to those in Straight Creek. This anomaly results from the exposure of rhyolite porphyry in the Hottentot scar and weathering zone. The rhyolite contains less calcium than the altered andesites and tuffs in the Straight Creek catchment and probably does not have the abundant gypsum and calcite. The Hansen ground waters have reached gypsum saturation and have similar calcium, magnesium, and beryllium concentrations as Straight Creek ground waters but have lower concentrations of fluoride, manganese, zinc, cobalt, nickel, copper, and lithium. Lower concentrations of elements related to mineralization at Hansen likely reflect the more distal location of Hansen with respect to intrusive centers that provided the heat source for hydrothermal alteration. The other ground water with water chemistry trends that are outside the Straight Creek trends was from an alluvial well from Capulin Canyon (CC2A). Although it had pH values near 6.0 and most major ions similar to the other Capulin Canyon ground waters, it contained high concentrations of fluoride, manganese, aluminum, iron, beryllium, and zinc similar to a mineralized zone and had low alkalinity. Saturation indices indicate that solubility constraints continue to provide upper limits on some solute concentrations. Siderite, ferrihydrite, calcite, gypsum, rhodochrosite, and barite provide limits for concentrations of Fe(II), Fe(III), Ca, Mn, and Ba, respectively. Beryllium concentrations may be subject to an upper concentration limit by the solubility of Be(OH) 2 but these concentrations probably are not reached in the ground waters. Ground-water isotopic data were consistent with the meteoric water line estimated for precipitation in the Red River Valley, indicating that all the ground waters examined in this study were meteoric, recent in origin, and showed no substantial indication of evaporation. Tritium-helium-3 and chlorofluorocarbon (CFC) age dating were partially successful. Generally, dates were consistent with location and depth of wells. Two samples had good agreement between CFC dates and tritium-helium dates, whereas a third reflected either substantial mixing with younger or older waters or complications arising from excess helium-4. The well at La Bobita appeared to contain a large component of modern water, most likely as a result of mixing with water from Red River alluvial deposits.

New Mexico↗
USGS2005

Questa baseline and pre-mining ground-water quality investigation. 5. Well installation, water-level data, and surface- and ground-water geochemistry in the Straight Creek drainage basin, Red River Valley, New Mexico, 2001-03

The U.S. Geological Survey, in cooperation with the New Mexico Environment Department, is investigating the pre-mining ground-water chemistry at the Molycorp molybdenum mine in the Red River Valley, northern New Mexico. The primary approach is to determine the processes controlling ground-water chemistry at an unmined, off-site, proximal analog. The Straight Creek drainage basin, chosen for this purpose, consists of the same quartz-sericite-pyrite altered andesitic and rhyolitic volcanic rock of Tertiary age as the mine site. The weathered and rugged volcanic bedrock surface is overlain by heterogeneous debris-flow deposits that interfinger with alluvial deposits near the confluence of Straight Creek and the Red River. Pyritized rock in the upper part of the drainage basin is the source of acid rock drainage (pH 2.8-3.3) that infiltrates debris-flow deposits containing acidic ground water (pH 3.0-4.0) and bedrock containing water of circumneutral pH values (5.6-7.7). Eleven observation wells were installed in the Straight Creek drainage basin. The wells were completed in debris-flow deposits, bedrock, and interfingering debris-flow and Red River alluvial deposits. Chemical analyses of ground water from these wells, combined with chemical analyses of surface water, water-level data, and lithologic and geophysical logs, provided information used to develop an understanding of the processes contributing to the chemistry of ground water in the Straight Creek drainage basin. Surface- and ground-water samples were routinely collected for determination of total major cations and selected trace metals; dissolved major cations, selected trace metals, and rare-earth elements; anions and alkalinity; and dissolved-iron species. Rare-earth elements were determined on selected samples only. Samples were collected for determination of dissolved organic carbon, mercury, sulfur isotopic composition (34S and 18O of sulfate), and water isotopic composition (2H and 18O) during selected samplings. One set of ground-water samples was collected for helium-3/tritium and chlorofluorocarbon (CFC) age dating. Several lines of evidence indicate that surface water is the primary input to the Straight Creek ground-water system. Straight Creek streamflow and water levels in wells closest to the apex of the Straight Creek debris fan and closest to Straight Creek itself appear to respond to the same seasonal inputs. Oxygen and hydrogen isotopic compositions in Straight Creek surface water and ground water are similar, and concentrations of most dissolved constituents in most Straight Creek surface-water and shallow (debris-flow and alluvial) aquifer ground-water samples correlate strongly with sulfate (concentrations decrease linearly with sulfate in a downgradient direction). After infiltration of surface water, dilution along the flow path is the dominant mechanism controlling ground-water chemistry. However, concentrations of some constituents can be higher in ground water than can be accounted for by concentrations in Straight Creek surface water, and additional sources of these constituents must therefore be inferred. Constituents for which concentrations in ground water can be high relative to surface water include calcium, magnesium, strontium, silica, sodium, and potassium in ground water from debris-flow and alluvial aquifers and manganese, calcium, magnesium, strontium, sodium, and potassium in ground water from the bedrock aquifer. All ground water is a calcium sulfate type, often at or near gypsum saturation because of abundant gypsum in the aquifer material developed from co-existing calcite and pyrite mineralization. Calcite dissolution, the major buffering mechanism for bedrock aquifer ground water, also contributes to relatively higher calcium concentrations in some ground water. The main source of the second most abundant cation, magnesium, is probably dissolution of magnesium-rich carbonates or silicates.

New Mexico↗