USGS Science⌕ Search

FIND YOUR NEXT DISCOVERY

Results for “Final Technical Report”

Original records, connected by a shared subject.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

534 records · Page 3Linked to original sources
USGS2025

Flow heterogeneity controls dissolution dynamics in topologically complex rocks

Rock dissolution is a common subsurface geochemical reaction affecting pore space properties, crucial for reservoir stimulation, carbon storage, and geothermal energy. Predictive models for dissolution remain limited due to incomplete understanding of the mechanisms involved. We examine the influence of flow, transport, and reaction regimes on mineral dissolution using 29 time-resolved data from 3D rocks. We find that initial pore structure significantly influences the dissolution pattern, with reaction rates up to two orders of magnitude lower than batch conditions, given solute and fluid-solid boundary constraints. Flow unevenness determines the location and rate of dissolution. We propose two models describing expected dissolution patterns and effective reaction rates based on dimensionless metrics for flow, transport, and reaction. Finally, we analyze feedback between evolving flow and pore structure to understand conditions that regulate/reinforce dissolution hotspots. Our findings underscore the major impact of flow arrangement on reaction-front propagation and provide a foundation for controlling dissolution hotspots.

Geophysical Research Letters↗
USGS2025

Prospectivity modeling of the NASA VIPER landing site at Mons Mouton near the Lunar South Pole

We use a high-resolution digital elevation model and a numerical thermal model to produce a variety of inputs for a water-ice prospectivity model for the Volatiles Investigating Polar Exploration Rover (VIPER) landing site. These input data are maps of topography, surface slope, surface aspect, surface curvature, maximum temperature, depth to ice stability, permanently shadowed regions (PSRs), distance to PSRs, and PSR density. This model predicts where water ice is most likely within the top meter of regolith, assuming plausible relationships between ice concentration and the various inputs. The model is designed to be adjusted in near-real time as data are collected during the VIPER mission. As such, it is a tool for both analyzing data from the mission as well as planning operations. Since the current model, at this point, relies only on orbital remote sensing, the final version will also be a tool to extrapolate the VIPER mission results across the lunar poles.

Planetary Science Journal↗
USGS2024

A benchmark dataset and workflow for landslide susceptibility zonation

Landslide susceptibility shows the spatial likelihood of landslide occurrence in a specific geographical area and is a relevant tool for mitigating the impact of landslides worldwide. As such, it is the subject of countless scientific studies. Many methods exist for generating a susceptibility map, mostly falling under the definition of statistical or machine learning. These models try to solve a classification problem: given a collection of spatial variables, and their combination associated with landslide presence or absence, a model should be trained, tested to reproduce the target outcome, and eventually applied to unseen data. Contrary to many fields of science that use machine learning for specific tasks, no reference data exist to assess the performance of a given method for landslide susceptibility. Here, we propose a benchmark dataset consisting of 7360 slope units encompassing an area of about 4,100 km 2 "> 4,100 km 2 in Central Italy. Using the dataset, we tried to answer two open questions in landslide research: (1) what effect does the human variability have in creating susceptibility models; (2) how can we develop a reproducible workflow for allowing meaningful model comparisons within the landslide susceptibility research community. With these questions in mind, we released a preliminary version of the dataset, along with a “call for collaboration,” aimed at collecting different calculations using the proposed data, and leaving the freedom of implementation to the respondents. Contributions were different in many respects, including classification methods, use of predictors, implementation of training/validation, and performance assessment. That feedback suggested refining the initial dataset, and constraining the implementation workflow. This resulted in a final benchmark dataset and landslide susceptibility maps obtained with many classification methods. Values of area under the receiver operating characteristic curve obtained with the final benchmark dataset were rather similar, as an effect of constraints on training, cross–validation, and use of data. Brier score results show larger variability, instead, ascribed to different model predictive abilities. Correlation plots show similarities between results of different methods applied by the same group, ascribed to a residual implementation dependence. We stress that the experiment did not intend to select the “best” method but only to establish a first benchmark dataset and workflow, that may be useful as a standard reference for calculations by other scholars. The experiment, to our knowledge, is the first of its kind for landslide susceptibility modeling. The data and workflow presented here comparatively assess the performance of independent methods for landslide susceptibility and we suggest the benchmark approach as a best practice for quantitative research in geosciences.

Earth-Science Reviews↗
USGS2026

Groundwater source water assessment area delineation of public supply wells in the Treasure Valley, western Idaho

The Idaho Department of Environmental Quality (IDEQ) is responsible for assessing the source water for public water supply systems including the delineation of source water assessment areas for wells, which are defined as the subsurface areas contributing water to a well during a period of time. Part of the IDEQ assessment plan is to update source water assessments over time. The U.S. Geological Survey (USGS) developed a new groundwater-flow model for part of the western Snake River Plain aquifer in southwestern Idaho. This groundwater- flow model provided a new opportunity for IDEQ to update source water assessment for public water supply wells within the model boundary. The USGS, in cooperation with IDEQ, used the USGS Treasure Valley Groundwater Flow Model along with a MODPATH particle tracking post-processing program to reassess public-water supply source water assessment areas. The USGS created an automated script that requests a well location, depth, and pumpage rate, and then incorporates that information into the Treasure Valley Groundwater Flow Model combined with the MODPATH model to create 3-, 6-, and 10-year time of travel zones that are output to a geographic information system shapefile. The TVSWA_Delineator script provides a fast, transparent tool for IDEQ to reassess or create new public-water supply source water assessment area delineations based on new and updated information and is available as a Python script and a Windows executable with the compiled script and all necessary components. TVSWA_Delineator utilizes a quadtree approach to rediscretize the Treasure Valley Groundwater Flow Model grid around the pumping well location from 1-mile cell lengths telescoped down to 1/16 mile. This rediscretization increases the source water assessment area delineation resolution near the pumping well and minimizes the effect of weak sinks in the MODPATH model. The stress inputs for each month of the final 10 years (2006 to 2015) of the Treasure Valley Groundwater Flow model historical simulation were averaged for the particle tracking analysis. The MODPATH model used backwards tracking of particles released at each stress period to create the source water assessment area delineations. This report documents the creation of the TVSWA_Delineator Python script, including adaptations made to the Treasure Valley Groundwater Flow Model, creation of a companion MODPATH model, and post-processing results to provide source water assessment areas.

Idaho↗
USGS2026

Tephra from Kīlauea’s 2008–2018 lava lake eruption—Proximal deposits and dispersal characteristics

A network of ten buckets was established early in the 2008–2018 summit eruption at Kīlauea to collect proximal tephra ejected from the new, informally named the “Overlook crater”; the buckets were emptied on most days of the eruption thereafter. This report summarizes the results of more than 2,400 different sampling intervals (most 1–3 days long) during the eruption, focusing on the physical and dispersal characteristics of the tephra deposits. The network was within about 300 meters south of the vent to capture tephra dispersed by the dominant northeast trade wind. The juvenile tephra mainly reflected spattering at the southeast (SE) sink, a downwelling area in the southeastern part of the lava lake in the Overlook crater that remained in the same area throughout the eruption, with admixtures of solid rock and secondary minerals derived from the wall of the crater. The proportion of juvenile material to lithic material ranged widely early in the eruption but was generally greater than 90 percent for the last 6 years of the eruption as lake level rose and the crater walls decreased in height and became more stable. The accumulation rate of tephra at each bucket was strongly dependent on the location of the bucket and reflects the interplay between lava lake level and wind direction and speed. The mass per unit area (m/a) of collected tephra was a maximum of about 97 kilograms per square meter for the entire eruption, equivalent to a thickness of about 75 millimeters. Thirty-two explosive events with a volcanic explosivity index of −2 to −4 deposited much of the tephra in the network. Fifteen of these rock-fall-induced events occurred within 6 days of one another. Pele’s hair, a volcanic glass predominantly associated with quieter activity at the vent in the final half of the eruption, was dispersed more than 60 kilometers downwind from the lava lake and formed a nearly continuous deposit near the Overlook crater. This eruption was probably the most frequently sampled long-lasting eruption in history, but most of the deposits are ephemeral. The collected samples, although generally of small mass, are retained by the Hawaiian Volcano Observatory and are available for detailed study.

Hawaii↗
USGS2026

A case study of maximum depositional ages from terrestrial sandstones near the Cretaceous—Paleogene transition, western Williston Basin, USA

We present a new Bayesian method for deriving maximum depositional ages from detrital K-feldspar using total-fusion 40 Ar/ 39 Ar data. Individual analyses weighted by K/Ca ratio, age uncertainty, and percent radiogenic argon prioritize a result to come from accurately measured volcanic sources. Results from this method applied to sandstones from the Hell Creek region of northeastern Montana show that detrital K-feldspar maximum depositional ages align closely with detrital U-Pb zircon ages as well as tephra based chronostratigraphic constraints from both 40 Ar/ 39 Ar and U-Pb data. An age model informed by maximum depositional ages and available tephra data provides an estimate of 1.74 ± 1.04 Ma for the duration of deposition for the Hell Creek Formation. Combined age model and maximum depositional age data suggest ≤ 1.84 Ma of missing time is represented by the Hell Creek and Fox Hills formational disconformity, coinciding with the final regression of the Western Interior seaway.

Montana↗
USGS2025

Benthic habitat map of Olowalu Reef, Maui, Hawaii—Geomorphological structure, biological cover, and geologic zonation determined with spectral, lidar, and acoustic data

The fringing coral reef off Olowalu, Maui, Hawaii, has been identified as a local conservation priority site. In 2007, the National Oceanic and Atmospheric Administration (NOAA) produced a benthic habitat map of the Hawaiian Islands that was used as a foundation for this study. To support place-based management of the reef in the future, the U.S. Geological Survey (USGS) mapped the geologic zone, major and dominant geomorphological structure, biological cover type, and percent of biological cover for 11 square kilometers (km 2 ) of Olowalu Reef at a minimum mapping unit (MMU) of 100 square meters (m 2 ) to create a benthic habitat map. Heads-up digitization was employed on 0.50-meter (m) natural color satellite orthoimagery with ancillary 1-m acoustic backscatter imagery from single-scan sonar (sound navigation and ranging). A 1-m, 4-m, and 8-m digital bathymetric model (DBM) was interpolated from bathymetric lidar (light detection and ranging), and various geomorphometric layers derived from the DBMs were used for habitat interpretation. Still-frame imagery of the seafloor extracted from vessel-towed underwater video transects on Olowalu Reef served as ground validation points ( n =870) during active mapping and accuracy assessment points ( n =216) for thematic accuracy assessment. Thematic accuracy was cross-validated by the Hawai‘i Department of Land and Natural Resources Division of Aquatic Resources. Final thematic accuracy was 88.8 percent for major structure, 85.6 percent for dominant structure, 86.0 percent for major biological cover, and 78.6 percent for type and percent of major biological cover. Reef and hardbottom constituted 52 percent of the total mapped habitat, comprising mostly aggregate reef (31 percent) and pavement (11 percent), with large swaths of spur-and-groove (9 percent). Of this hardbottom, 17 percent was covered with moderate (10 to <50 percent) coral and 27 percent with high coral cover (50 to <90 percent). High (50 to <90 percent) macroalgae cover dominated the continuous sand sheets in offshore bank/shelf zones. The map created in this study supplements the NOAA 2007 map and expands on the observations made by USGS sampling of the reef. The NOAA 2007 map and our map differed in total areal extent by a negligible 6 m 2 and were in general thematic agreement. Our map is intended to serve as a baseline for public access, general research, local-level management, and reef change for future studies.

Hawaii↗
USGS2025

Gravity and magnetic surveys of the Skaergaard intrusion, East Greenland

Aeromagnetic and gravity surveys of the Skaergaard intrusion in East Greenland were carried out in July–August 1971 as part of a grant to the University of Oregon Center for Volcanology to refine the models of crystallization and differentiation of the intrusion, specifically to test whether the intrusion is underlain by dense rocks of a reservoir 20 kilometers (km) thick (referred to as a “hidden zone”). The Skaergaard intrusion is a source of platinum group elements that are critical mineral resources for many technologies, and because no new data have been collected these legacy datasets remain a valuable asset. The total-intensity aeromagnetic survey was flown in early July 1971 with a proton precession magnetometer at a constant barometric altitude of 1.5 km (5,000 feet) with a nominal line spacing of 1 km. Two gravimeters were used to acquire 168 stations of which 86 were at known altitudes (mainly sea level) and 82 had altitudes measured by altimetry in late July–August 1971. Finally, a north-south ground vertical-intensity magnetic traverse was completed across the intrusion together with collection of oriented hand specimens. The hand specimens were measured for remnant magnetization and density, along with density measurements of more specimens collected by expedition geologists for other purposes. The intrusion is composed of layered gabbro with extensive crystal fractionation that is dense and strongly reversely polarized. After terrain correction and standard Bouguer gravity reduction, the gravity anomaly dataset was corrected for all rock above sea level using the density measurements of the various zones of the intrusion and the topographic and geologic maps (variable density Bouguer gravity reduction). A large regional gradient in the gravity anomaly data was removed using orthogonal polynomial fitting to the gridded data. The zonal volumes of rock below sea level were calculated from the dipping polygonal layer gravity model of the intrusion below sea level and combined with elliptic cross–section cylinders for the various zones above sea level to approximate the original zonal volumes of the intrusion. The residual gravity anomaly of 18–20 milligals (mGal) was only about half of the expected anomaly if a large hidden zone proposed from petrologic considerations were present, and both two-dimensional and three-dimensional models imply that the exposed series of intrusion zones explain the gravity anomaly by their down-dip extension below sea level together with a small hidden-zone volume. A three-dimensional model of the exposed rocks and their down-dip extension below sea level also can account for the aeromagnetic anomaly with little or no requirement for hidden-zone rock. The middle and upper zone units of the intrusion contain the most magnetite and account for most of the aeromagnetic anomaly.

Skaergaard intrusion↗
USGS2024

Hydrologic investigations and a preliminary conceptual model of the groundwater system at North Penn Area 1 Superfund Site, Souderton, Montgomery County, Pennsylvania

The U.S. Geological Survey (USGS) conducted hydrogeologic investigations, reviewed existing data, and developed a preliminary conceptual model of the groundwater system as part of technical support of the U.S. Environmental Protection Agency (EPA) at the North Penn Area 1 Superfund Site (hereafter, the NP1 Site) located within the Borough of Souderton in Montgomery County, Pennsylvania. Field work and monitoring took place during 2012–18. The area is underlain by sedimentary formations that form a fractured-rock aquifer used for drinking water and industrial supply. The EPA placed the Site on the National Priorities List in 1989, identifying tetrachloroethylene (PCE) and trichloroethylene (TCE) as contaminants of concern. During 2012–18, the USGS conducted field activities that included drilling an 82-foot (ft)-deep monitoring well (MG 2220) in 2016, reconstructing a 208-ft-deep former industrial production well (MG 668 [Granite Knitting Mill]), and collecting borehole geophysical and video logs and water levels from those and five additional wells, which ranged in depth from about 50 to 200 ft below land surface. Continuous water levels were collected during 2014–17, and a synoptic set of water levels were measured in April 2018 in the seven wells. The borehole geophysical logs (caliper, acoustic televiewer, natural gamma, single-point resistance, vertical flow, and fluid temperature and resistivity) and borehole video logs in the seven wells were evaluated to assess potential for lithologic correlation and to identify and describe water-bearing features, which included both low- and high-angle fractures and other openings oriented along dipping bedding planes, joints, or possible faults. Borehole geophysical logs collected by USGS in 1992 in a 300-ft-deep former production well near the Site were also evaluated. Few to no distinctive features were identified on geophysical logs (natural gamma and single-point resistance) that could be used for correlation, thus limiting this approach to determining local geologic structure. Extensive fracturing in the upper 62 ft of monitoring well MG 2220 indicates that the well was likely drilled through a zone of faulting, and other evidence of faulting is present in the area near the Site. Assessment of continuous water levels showed hydraulic connections among some wells as indicated by rising or falling water levels in response to changes in pumping rates at nearby wells. A map of water levels measured in April 2018 indicates potential for groundwater flow generally toward the stream to the south and southwest of the Site, but the limited water-level data are insufficient to describe vertical groundwater gradients or lateral gradients in any detail. Review of 1999–2022 volatile organic compound (VOC) monitoring data collected by the Pennsylvania Department of Environmental Protection for five monitoring wells indicates that the highest groundwater concentrations of PCE and TCE were found in samples from extraction well MG 2201 (S-1) downgradient from, and nearest to, the previously identified Site contaminant source area, and these concentrations fluctuated through time. PCE concentrations were higher than TCE concentrations in samples from all five monitoring wells and were much higher than TCE concentrations in samples from extraction well MG 2201 (S-1). Temporally variable recharge is a possible factor affecting observed fluctuations in PCE concentrations in groundwater samples from well extraction MG 2201 (S-1), as indicated by a general inverse relation between PCE concentrations and water levels in a nearby long-term observation well. The PCE concentration of 1,830 micrograms per liter (μg/L) in a May 2018 water sample from monitoring well MG 2220 was more than four times the PCE concentration of 444 μg/L in a December 2017 sample from the nearby extraction well MG 2201 (S-1), which is open to fewer fractures. Low concentrations of VOCs were measured in surface water at two stream sites downgradient from wells with the highest groundwater VOC concentrations at the Site, indicating that discharge of contaminated groundwater to the stream is likely. Development of a conceptual model of the groundwater system was constrained by limited data. In areas with no pumping, groundwater-flow directions generally are thought to be controlled by topography and geologic structure (bedding orientation) and likely to the south and southwest of the Site, with local flow directions affected by orientations of fractures, joints, and local faults. Additional investigations that could help improve the conceptual model of the groundwater system and help delineate the extent of groundwater contamination and its transport are discussed.

Pennsylvania↗
USGS2026

A practical decision tool for marine bird mortality assessments

Given the rise in anthropogenic, environmental, and disease events contributing to marine bird mortality, there is a critical need to improve the rigor of mortality assessments. Deficits in data collection and mortality estimation can hinder a manager’s ability to document the scale of events and assess population level impacts. Therefore, to inform decisions required during activities, such as conservation status assessments or harvest management, organizations may choose to incorporate mortality assessments into response plans. Resources, capacity, and assets to assess mortality vary across jurisdictions (federal, state, Indigenous, local, etc.), and clear guidance to support mortality assessments is often unavailable or not clearly addressed. Here, we present a decision support tool to help managers identify and evaluate survey options to assess bird mortality in a diverse array of scenarios. The objective of the decision tool is to improve data collection and availability, which will increase the ability to estimate mortality robustly, given situation-specific attributes and constraints. This decision tool is designed to guide the response when a mortality event is initially encountered and offers suggestions for assessment and reporting procedures in the absence of other guidance or to complement existing protocols. The decision tool is also meant to inform decision making for response determination and resource allocation. The tool facilitates examination of options for further assessment and monitoring, which users determine by examining questions pertaining to species prioritization, determination of mortality minimum spatial extent, and the potential magnitude of impacts on affected species. Finally, identification of appropriate survey methods that address imperfect detection when a complete census is not possible are determined by exploring location, spatial and temporal extent, and the type of species affected. Ultimately, this decision tool aims to facilitate and improve the standardization of mortality assessments, equipping managers with a practical resource to navigate the decision-making process for marine bird mortality estimation.

Ornithological Applications↗
USGS2025

A method to obtain remotely sensed grain size distributions from nonplanar granular deposits

Constraining the grain size distribution of granular deposits with complex surfaces is difficult with existing approaches. Field and laboratory techniques are time consuming and limited by the maximum grain size that laboratories can accommodate. In this study, we present a new method to identify the coarse fraction of the grain size distribution at a debris-flow fan deposit surveyed with terrestrial laser scanning (TLS) in Glenwood Canyon, Colorado, USA. This method is a novel grain segmentation algorithm developed for application to point cloud data of deposits with complex surfaces and angular grains ranging in size from centimeters to a meter. This approach combines an existing random forest machine learning method with a novel iterative clustering algorithm. We compared the grain size distribution from our algorithm with a Wolman pebble count conducted in the field, and found a root mean squared error of less than 2 cm from the 5th to 95th percentile of the grain size distribution of grains ranging from cobble to boulder sized (6.3–78 cm in our application). Finally, we compared our new algorithm with an existing open-source grain segregation algorithm, and our method outperformed the selected alternative when applied to the debris-flow deposit point cloud.

Colorado↗
USGS2025

Preliminary field report of landslide hazards following Hurricane Helene

Executive Summary This report reflects our knowledge regarding the widespread landslide activity associated with Hurricane Helene observed during the U.S. Geological Survey’s (USGS) mission assignment to North Carolina in October 2024. The material in this report was originally prepared for the Federal Emergency Management Agency under mission assignment DR-4827-NC. The data and commentary in this report are reflective of a report provided to the Federal Emergency Management Agency (FEMA) on October 18, 2024, as well as information provided in briefings at the Buncombe County Emergency Operations Center. The report has been modified for public dissemination. This assessment was based on systematic visual examination and mapping of landslide locations from aerial and satellite imagery, visual and photographic observations from low-level helicopter overflights and conversations with local landslide experts from the North Carolina Geological Survey and Appalachian Landslide Consultants PLLC, and more than 50 years of combined landslide hazard professional experience of the mission-assigned field team. No systematic field investigations were done by the USGS. While responding to the event, the USGS did not identify any landslides that posed an immediate major threat to recovery personnel in parts of nine counties in North Carolina (Avery, Buncombe, Henderson, McDowell, Mitchell, Polk, Rutherford, Watauga, and Yancey); however, threats from renewed landslide activity may remain heightened in localized areas for months or even years. Known areas of the most abundant landslide occurrence include Bat Cave, Lake Lure, Chimney Rock, Swannanoa, Black Mountain, Fairview, steep areas in Asheville, and the Blue Ridge Parkway. The USGS shared detailed locations of known landslides with the Emergency Operations Centers. The thousands of landslide scars on hillsides and landslide deposits on flatter ground may present some threat to recovery activities. Soil and rocks will continue to erode from newly exposed landslide scars and may pose a threat to people and infrastructure who are immediately nearby. In general, the steeper and taller the landslide scar, the greater the potential threat. This threat is heightened during periods of rainfall and increases with the duration and intensity of rainstorms. Very heavy rainfall, or repeated rainfall events during short periods, could also initiate new landslides on steep slopes. Excavation of landslide deposits, particularly excavation of those deposits directly adjacent to steep slopes, may also pose a threat to nearby people and equipment. An interagency collaborative mapping effort led by the USGS that informed this assessment identified 1,155 landslide locations by the October 2024 briefings, but that number increased to 2,217 in a final reviewed version of the locations published in January 2025. Locations were mapped from satellite imagery, fixed-wing and helicopter surveys, media and social media, and field reports in the 3 weeks following the passage of the remnants of Hurricane Helene. USGS products outlined in this report are publicly available and include geotagged photographs from aerial reconnaissance, hazard models, an interactive view of mapped landslide locations, and landslide safety and education resources.

North Carolina, South Carolina, Tennessee, Virgini↗
USGS2024

Geophysical identification of potential groundwater – surface water interactions in the Bonita Peak Mining District, San Juan County, Colorado

This report includes the results and interpretation of geophysical investigations to aid in the location, identification, and conceptual site model (CSM) development of the near surface groundwater and surface water hydrology of the Upper Cement Creek and California Gulch of the Animas Rivers within the Bonita Peak Mining Districts (BPMD). Mine influenced water (MIW) from numerous mine adits within the BPMD has altered the geochemistry and ecology of these ground and surface waters. Many studies of varying scales have investigated the geology, hydrogeology, geochemistry, and aqueous chemistry of these adits and impacted areas. Field investigations using non-invasive geophysical methods were conducted in the summer of 2019 to aid in identifying potential groundwater inputs to these streams and further the CSM of the near surface within and along these streams. Two field deployments were completed in August and September of 2019. In August 2019, Phase 1 was completed using multifrequency electromagnetic induction (EMI) and thermal infrared imaging (TIR) to measure the bulk electrical conductivity, magnetic susceptibility, and the temperature response at known and suspected groundwater seeps into the Upper Cement Creek and California Gulch stretches of these alpine streams. Results and interpretation from Phase 1 were used to co-locate stretches of these streams for further detailed fiber optic distributed temperature system (FODTS) monitoring of the temperature dynamics for submeter identification of potential groundwater seeps during Phase 2. Phase 2 included additional EMI measurements, FODTS measurements, and repeated some Phase 1 measurements for improved data quality. All these data were used for the combined qualitative interpretation identifying seep locations. The data from both Phase 1 and Phase 2 are available in the USGS data release at: https://www.sciencebase.gov/catalog/item/5f18a30082cef313ed84879b. These data include detailed near-surface electrical conductivity and magnetic susceptibility mapping, discrete TIR imaging, and several kilometers of FODTS data. These data were georeferenced and used to identify potential groundwater seeps into these streams. The results indicate a complex near surface geophysical and hydrogeologic regime. Seeps are classified and spatially correlated to the EMI, TIR, and geochemical sampling results. This report is a thorough compilation of the geophysical field efforts in the summer of 2019, the data processing, and interpretations of these data. These data alone should not be used for final interpretations of the complex hydrogeology within these alpine systems. Rather, these data should be combined with other known data from various investigations to further refine the CSM and guide decisions for future investigations, watershed protective measures, and other site decisions. Geographical information system (GIS) layers of these results are available to project managers for such integration and combined interpretations.

Colorado↗
USGS2026

Evaluating machine learning approaches to identify and predict oil and gas produced water lithium concentrations

Recently, the demand for battery-grade lithium has substantially increased, largely due to electrification of the transportation sector. The search for new lithium sources has turned to produced waters (frequently brines), a large-volume wastewater by-product of oil and gas extraction. Geochemical analysis indicates the presence of varying concentrations of lithium from produced water samples collected across the United States and represented in the U.S. Geological Survey’s National Produced Water Geochemical Database, as well as mixtures of Marcellus Shale produced water included in the Pennsylvania Department of Environmental Protection’s Oil and Gas Well Waste Reports. We first examined whether the geochemical signature of the lithium-bearing produced waters is sufficiently distinct so that machine learning (ML) can be used to correctly classify samples to the formation of origin. The produced water sample data used to assess classification accuracy were from the Marcellus Shale, Utica Shale and Point Pleasant Formation (Utica), and Smackover Formation oil and gas wells. Further, we evaluated the potential for ML to accurately classify Marcellus Shale produced water spatially (i.e., northeast versus southwest Pennsylvania). We then investigated whether ML algorithms applied to a suite of geochemical concentration data (i.e. Ba, Br, Cl, K, Mg, Sr) may be used to predict the lithium concentration of an unknown sample. Finally, we applied an estimated economic lithium grade cutoff of 150 milligrams per liter (mg/l) and assessed the utility of ML to predict whether a produced water sample would fall above or below the grade cutoff based on the suite of geochemical parameters. Four machine learning algorithms—Random Forest (RF), Gradient Boosting Trees (GBT), Extreme Boosting (XGBoost), and Deep Neural Networks (DNN) were assessed. This study successfully demonstrates that all four machine learning methods can precisely and accurately estimate lithium concentrations and geologic formation classification. The products of this study contribute to the growing body of knowledge aimed at expanding the lithium resource base within the United States.

Alabama, Arkansas, Florida, Georgia, Louisiana, Mi↗
USGS2025

Review and synthesis of the applications of machine learning to coalbed methane recovery

Over the last 30 years, a substantial literature has evolved on the use of machine learning (ML) to assess, predict, and improve the efficiency of coalbed methane (CBM) recovery. In the United States, the production of CBM declined as shale gas production matured, but CBM continues to be an important energy resource in other parts of the world. ML applications that have the potential to improve CBM reservoir management and production forecasts, and to increase exploration and operational efficiency, are still of significant interest. The integration of geostatistical techniques into the CBM ML applications has been largely absent but represents an opportunity for improvement. The literature demonstrates the widespread interest in, and applicability of, ML algorithms applied to CBM problems, and that they continue to result in improvements in predictive performance. However, (1) much of the research is more academic than operational, (2) many results are based on simulations, or small or proprietary datasets, (3) ML performance information can be inconsistent and sometimes entirely omitted, (4) most methodologies are unique to the specific CBM situation and likely not generalizable, (5) no standard data repositories are available to directly compare the performance of competing algorithms, and (6) the spatial component is often omitted. Finally, relatively new ML protocols involving causality analysis and reinforced learning, as well as hybrid workflows combining both supervised and unsupervised learning, are anticipated to dominate the future investigations. Integration of geostatistical and geospatial analysis with ML should enhance performance.

Book chapter↗
USGS2025

Constraining large magnitude event source and path effects using ground motion simulations

The purpose of this study is to use ground motion simulations to investigate ways in which source and path effects for large magnitude events can be represented in non-ergodic GMMs. While we initially developed computation techniques using CyberShake simulations, the range of magnitudes and source-site combinations is not adequate to replicate what is observed empirically. We therefore designed a new ground motion simulation study, which includes earthquakes with a large range of magnitudes distributed uniformly on a fault plane, and sites covering a large range of rupture distances and azimuths. After running a large suite of simulations (M4-M7), we then develop a non-ergodic GMM with the simulation data. We find that the within-site residuals are dominated by the radiation pattern, rupture directivity, and slip patterns. Next, we modify an existing rupture directivity model to fit and remove the observed radiation pattern and rupture directivity from the residuals. We also minimize the contributions of slip patterns by averaging the within-site residuals among multiple source realizations. Finally, after removing the source effects from the within-site residuals, we compare the path effects computed with different magnitude groups using two approaches. The first approach only considers the small events that have the same shortest path to a site with the large events, while the second approach considers all small events on the fault plane. The results indicate that the path effects of large events cannot be satisfactorily approximated with that of small events using either approach.

Conference Paper↗
USGS2025

Framework for assessing intranational risk of critical mineral sectors: Case study of India

Recent geopolitical actions regarding the supply of critical minerals have highlighted both the threats posed by countries dominating a critical mineral supply chain, and the potential mitigations served by alternative supplier countries. However, no systematic quantification exists for the intranational factors that determine such threats or mitigations. This study outlines a methodological framework for quantifying the intranational risk profile of critical mineral sectors and compares them with the sector's international potential for leverage. The four intranational factors of concentration, synchronization, private sector involvement, and regulatory obstacles were analyzed across multiple scales in order to determine an intranational risk score that quantifies the resilience or fragility of the critical mineral sector in question. Network analysis was also separately conducted to identify the most important entities operating across all critical mineral sectors. Finally, this study assessed the critical mineral sector's global share of reserves and production to determine an international risk score that quantifies the country's critical mineral sector's leverage potential. A case study of India showed that two critical mineral sectors with high leverage potential, chromite and barite, were respectively intranationally resilient and fragile. Of the remaining sectors with minimal leverage, five sectors such as aluminum were intranationally resilient and may serve as viable mitigation options for future critical mineral supply. Three sectors such as titanium were intranationally fragile, but recent regulatory developments may both decrease intranational risk and increase international risk, potentially making them major critical mineral sectors in the future.

Resources Policy↗
USGS2026

Ten new insights in climate science 2025

Interdisciplinary understanding is vital for delivering sound climate policy advice. However, navigating the ever-growing and increasingly diverse scholarly literature on climate change is challenging for any individual researcher. This annual synthesis highlights and explains recent advances across a variety of fields of climate change research. This year, the 10 insights focus on: (1) the record-warmth of 2023/2024 and the elevated Earth energy imbalance; (2) acceleration of ocean warming and intensifying marine heatwaves; (3) northern land carbon sinks under strain; (4) reinforcing feedback between biodiversity loss and climate change; (5) accelerated depletion of groundwater; (6) global dengue incidence; (7) global income losses and labour productivity declines; (8) strategic scaling of CDR; (9) integrity challenges in carbon credit markets and emerging responses; and (10) effective policy mixes for emissions reductions. The insights have been written to be accessible to researchers from different fields, serving as entry-points to specific topics, as well as providing an overview of the evolving landscape of climate change research. In the final section, the insights are used to develop overarching policy-relevant messages. This paper provides the basis for a science-policy report that was shared with all Party delegations ahead of COP30 in Belém, Brazil.

Global Sustainability↗