USGS Science⌕ Search

SEARCH · USGS Science

Results for “Developments in Petrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS1981

Stable isotope systematics in mesozoic granites of Central and Northern California and Southwestern Oregon

18O, D, and H2O+ contents were measured for whole-rock specimens of granitoid rocks from 131 localitics in California and southwestern Oregon. With 41 new determinations in the Klamath Mountains and Sierra Nevada, initial strontium isotope ratios are known for 104 of these samples. Large variations in ??18O (5.5 to 12.4), ??D (-130 to -31), water contents (0.14 to 2.23 weight percent) and initial strontium isotope ratios (0.7028 to 0.7095) suggest a variety of source materials and identify rocks modified by secondary processes. Regular patterns of variation in each isotopic ratio exist over large geographical regions, but correlations between the ratios are generally absent except in restricted areas. For example, the regular decrease in ??D values from west to east in the Sierra Nevada batholith is not correlative with a quite complex pattern of ??18O values, implying that different processes were responsible for the isotopic variations in these two elements. In marked contrast to a good correlation between (87Sr/86Sr)o and ??18O observed in the Peninsular Ranges batholith to the south, such correlations are lacking except in a few areas. ??D values, on the other hand, correlate well with rock types, chemistry, and (87Sr/86Sr)o except in the Coast Ranges where few of the isotopic signatures are primary. The uniformly low ??D values of samples from the Mojave Desert indicate that meteoric water contributed much of the hydrogen to the rocks in that area. Even so, the ??18O values and 18O fractionations between quartz and feldspar are normal in these same rocks. This reconnaissance study has identified regularities in geochemical parameters over enormous geographical regions. These patterns are not well understood but merit more detailed examination because they contain information critical to our understanding of the development of granitoid batholiths. ?? 1981 Springer-Verlag.

Contributions to Mineralogy and Petrology↗
USGS1983

Reconnaissance geology of the Jabal Saq Quadrangle, sheet 26/43 C, Kingdom of Saudi Arabia

The Jabal Saq quadrangle is located in the northeastern part of the Arabian Shield at the northern end of the Najd region between lat 26?00' and 26?30' N. and long 43?00' and 43?30' E. The northeastern two-thirds of the quadrangle is underlain by Paleozoic sedimentary rocks, the southwestern one-third by Proterozoic metamorphic and igneous rocks. The oldest rocks in the quadrangle are weakly metamorphosed immature sandstones that may correlate with the Murdama group. They have been intruded by several large plutons ranging in composition from mafic granodiorite to syenogranite. A densely developed fracture cleavage cuts the metamorphic rocks; otherwise, no structural features were recorded. The quadrangle has low mineral potential; no ancient mines were identified. The Dharaymeeah syenogranite forms a large pluton and bears some petrologic resemblance to alkali granites identified elsewhere in the Arabian Shield that have documented potential for containing deposits of lithophile rare metals. Analyses of wadi sediment samples collected in the quadrangle suggest that the syenogranite may also be enriched in some of these elements. The anomalously radioactive Usba monzogranite resembles highly evolved peraluminous granite plutons that elsewhere in the world are associated with deposits of tin and tungsten.

Open-File Report↗
USGS1987

Petrologic and experimental evidence for the etching of garnets by organic acids in the upper Jurassic Morrision Formation, northwestern New Mexico

The upper Jurassic Morrison Formation in the southern part of the San Juan Basin contains uniquely etched detrital garnets characterized by smooth, crystallographically controlled faceted surfaces. The etched garnets occur in relatively homogeneous Morrison sandstones in discrete stratigraphic zones that are bounded above and below by sandstones bearing unetched garnets. Diagenetic alterations associated with etched garnets include etched staurolite, skeletal plagioclase, regularly interstratified illite-smectite, iron-rich chlorite, ankerite, albite, diagenetically altered (organic-poor) uranium ore, and extensive secondary porosity. Etching of garnets and partial to complete dissolution of other aluminosilicate minerals were caused by high concentrations of organic acids generated during the maturation of epigenetic organic matter (predominantly type-III kerogen) in the Morrison Formation. The presence of authigenic phases that form near 100 degrees C indicates that temperatures were high enough during diagenesis to cause the thermal degradation of kerogen. The subsequent release of reactive organic acids promoted a variety of water-rock reactions. This hypothesis was corroborated by experiments in which dicarboxylic acid solutions created facets on garnets identical to those developed on naturally etched Morrison garnets. The excellent complexing ability of organic acid anions accounts for the characteristic lack of alteration products on etched surfaces.

Journal of Sedimentary Petrology↗
USGS2009

Petrology and geochronology of crustal xenoliths from the Bering Strait region: Linking deep and shallow processes in extending continental crust

Petrologic, geochemical, and metamorphic data on gneissic xenoliths derived from the middle and lower crust in the Neogene Bering Sea basalt province, coupled with U-Pb geochronology of their zircons using sensitive high-resolution ion microprobe-reverse geometry (SHRIMP-RG), yield a detailed comparison between the P-T-t and magmatic history of the lower crust and magmatic, metamorphic, and deformational history of the upper crust. Our results provide unique insights into the nature of lithospheric processes that accompany the extension of continental crust. The gneissic, mostly maficxenoliths (constituting less than two percent of the total xenolith population) from lavas in the Enmelen, RU, St. Lawrence, Nunivak, and Seward Peninsula fields most likely originated through magmatic fractionation processes with continued residence at granulite-facies conditions. Zircon single-grain ages (n ??? 125) are interpreted as both magmatic and metamorphic and are entirely Cretaceous to Paleocene in age (ca. 138-60 Ma). Their age distributions correspond to the main ages of magmatism in two belts of supracrustal volcanic and plutonic rocks in the Bering Sea region. Oscillatory-zoned igneous zircons, Late Cretaceous to Paleocene metamorphic zircons and overgrowths, and lack of any older inheritance in zircons from the xenoliths provide strong evidence for juvenile addition of material to the crust at this time. Surface exposures of Precambrian and Paleozoic rocks locally reached upper amphibolite-facies (sillimanite grade) to granulite-facies conditions within a series of extension-related metamorphic culminations or gneiss domes, which developed within the Cretaceous magmatic belt. Metamorphic gradients and inferred geotherms (??30-50 ??C/km) from both the gneiss domes and xenoliths aretoo high to be explained by crustal thickening alone. Magmatic heat input from the mantle is necessary to explain both the petrology of the magmas and elevated metamorphic temperatures. Deep-crustal seismic-reflection and refraction data reveal a 30-35-km-thick crust, a sharp Moho and refl ective lower and middle crust. Velocities do not support a largely mafic (underplated) lower crust, but together with xenolith data suggest that Late Cretaceous to early Paleocene maficintrusions are likely increasingly important with depth in the crust and that the elevated temperatures during granulite-facies metamorphism led to large-scale flow of crustal rocks to produce gneiss domes and the observed subhorizontal refl ectivity of the crust. This unique combined data set for the Bering Shelf region provides compelling evidence for the complete reconstitution/re-equilibration of continental crust from the bottom up during mantle-driven magmatic events associated with crustal extension. Thus, despite Precambrian and Paleozoic rocks at the surface and Alaska's accretionary tectonic history, it is likely that a significant portion of the Bering Sea region lower crust is much younger and related to post-accretionary tectonic and magmatic events. ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗
USGS2006

Early Paleozoic development of the Maine-Quebec boundary Mountains region

Pre-Silurian bedrock units played key roles in the early Paleozoic history of the Maine-Quebec Appalachians. These units represent peri-Laurentian material whose collision with the craton deformed the Neoproteozoic passive margin and initiated the Appalachian mountain-building cycle. We present new field, petrological, geochronological, and geochemical data to support the following interpretations related to these units. (1) The Boil Mountain Complex and Jim Pond Formation do not represent part of a coherent ophiolite. (2) Gabbro and tonalite of the Boil Mountain Complex intruded the Chain Lakes massif at ca. 477 Ma. (3) The Skinner pluton, an arc-related granodiorite, intruded the Chain Lakes massif at ca. 472 Ma. (4) The Attean pluton, with a reconfirmed age of ca. 443 Ma, is unrelated to Early Ordovician orogenesis. (5) The most likely timing for the juxtaposition of the Jim Pond Formation and the Boil Mountain Complex was during regional Devonian deformation. These interpretations suggest that the Boundary Mountains were once part of a series of arcs extending at least from central New England through Newfoundland. ?? 2006 NRC Canada.

Canadian Journal of Earth Sciences↗
USGS1993

Geologic and geomorphic controls of coal development in some Tertiary Rocky Mountain basins, USA

Previous investigations have not well defined the controls on the development of minable coals in fluvial environments. This study was undertaken to provide a clearer understanding of these controls, particularly in of the lower Tertiary coal-bearing deposits of the Raton and Powder River basins in the Rocky Mountain region of the United States. In this region, large amounts of coals accumulated in swamps formed in the flow-through fluvial systems that infilled these intermontane basins. Extrabasinal and intrabasinal tectonism partly controlled the stratigraphic and facies distributions of minable coal deposits. The regional accumulation of coals was favored by the rapid basin subsidence coupled with minimal uplift of the source area. During these events, coals developed in swamps associated with anastomosed and meandering fluvial systems and alluvial fans. The extensive and high rate of sediment input from these fluvial systems promoted the formation of ombrotrophic, raised swamps, which produced low ash and anomalously thick coals. The petrology and palynology of these coals, and the paleobotany of the associated sediments, suggest that ombrotrophic, raised swamps were common in the Powder River Basin, where the climate during the early Tertiary was paratropical. The paleoecology of these swamps is identical to that of the modern ombrotrophic, raised swamps of the Baram and Mahakam Rivers of Borneo.

International Journal of Coal Geology↗
USGS1997

The role of diffusion-controlled oscillatory nucleation in the formation of line rock in pegmatite-aplite dikes

The George Ashley Block (GAB), located in the Pala Pegmatite District, San Diego County, California, is a composite pegmatite–aplite dike of 8 m thickness displaying striking mineralogical layering in the aplite portion of the dike, referred to as line rock. Rhythmic layering is characterized by garnet-rich bands alternating with albite–quartz–muscovite-rich bands. Cumulus textures are notably absent from the layered portion of the dike. Elongated quartz megacrysts are oriented perpendicular to the garnet-rich layers and poikilitically include garnet, albite, and muscovite. Calculated crystal-free magma viscosity with 3% H 2 O is 10 6.2 Pa s and the calculated settling velocity for garnet is 0.51 cm/year. Conductive cooling calculations based on emplacement of a 650°C dike into 150°C fractured gabbroic country rock at 1.5 kbar, and accounting for latent heat of crystallization, demonstrate that the line rock portion of the dike cools to 550°C in about 1 year. Crystal size distribution studies also suggest very rapid nucleation and crystallization. Diffusion-controlled gel crystallization experiments yield textures virtually identical to those observed in the layered aplite, including rhythmic banding, colloform layering, and band discontinuities. Thus, observed textures and calculated magmatic parameters suggest that mineralogical layering in the GAB results from an in situ diffusion-controlled process of oscillatory nucleation and crystallization. We propose that any event that promotes strong undercooling has the potential to initiate rapid heterogeneous nucleation and oscillatory crystal growth, leading to the development of a layer of excluded components in front of the crystallization front, and the formation of line rock.

Journal of Petrology↗
USGS2023

Petrology and geochronology of Cretaceous–Eocene plutonic rocks in northeastern Washington, USA: Crustal thickening, slab rollback, and origin of the Challis episode

Cretaceous through Eocene plutonic rocks in northeastern Washington, USA, document a 60 m.y. history of crustal thickening and subsequent collapse and extension in response to two terrane-accretion events. Rocks emplaced 113–53 Ma have increasing La/Yb ratios reflecting orogenic plateau development after arrival of the Insular terrane by 100 Ma. Plutons emplaced 52–45 Ma (the Challis episode) document collapse of this plateau and define a SW-younging age progression attributed to breakoff and rollback of the Farallon slab following accretion of the Siletzia terrane at ca. 50 Ma. All of the rocks have chemical traits of arc magmas, likely inherited from their lower-crustal sources, but low B/Be ratios and the lack of evidence for amphibole fractionation indicate the Eocene magmas formed under drier conditions than are typical of active subduction settings. These magmas also originated at greater depth (eclogitic vs. gabbroic source) and were emplaced more shallowly than the earlier ones. All rocks have overlapping Sr-Nd and O isotopic data, indicating significant contributions from older continental crust, and depleted mantle Nd model ages become older toward the east, defining three regions that correspond with previously inferred lower-crustal domains. Farallon slab rollback also drove extension (core complex formation, dike swarms) and crustal uplift, which, along with voluminous magmatism, define the Challis episode. This tectonic model is further supported by seismic tomography, which has identified remnants of a detached slab in the upper mantle beneath the region.

Washington↗
USGS1992

Geochemical evolution of Jurassic diorites from the Bristol Lake region, California, USA, and the role of assimilation

Late Jurassic dioritic plutons from the Bristol Lake region of the eastern Mojave Desert share several geochemical attributes with high-alumina basalts, continental hawaiite basalts, and high-K are andesites including: high K2O concentrations; high Al2O3 (16-19 weight %); elevated Zr/TiO2; LREE (light-rare-earth-element) enrichment (La/YbCN=6.3-13.3); and high Nb. Pearce element ratio analysis supported by petrographic relations demonstrates that P, Hf, and Zr were conserved during differentiation. Abundances of conserved elements suggest that dioritic plutons from neighboring ranges were derived from similar parental melts. In the most voluminous suite, correlated variations in elemental concentrations and (87Sr/86Sr)i indicate differentiation by fractional crystallization of hornblende and plagioclase combined with assimilation of a component characterized by abundant radiogenic Sr. Levenberg-Marquardt and Monte Carlo techniques were used to obtain optimal solutions to non-linear inverse models for fractional crystallization-assimilation processes. Results show that the assimilated material was chemically analogous to lower crustal mafic granulites and that the mass ratio of contaminant to parental magma was on the order of 0.1. Lack of enrichment in 18O with differentiation is consistent with the model results. Elemental concentrations and O, Sr, and Nd isotopic data point to a hydrous REE-enriched subcontinental lithospheric source similar to that which produced some Cenozoic continental hawaiites from the southern Cordillera. Isotopic compositions of associated granitoids suggest that partial melting of this subcontinental lithosphere may have been an important process in the development of the Late Jurassic plutonic arc of the eastern Mojave Desert. ?? 1992 Springer-Verlag.

Contributions to Mineralogy and Petrology↗
USGS2022

The Shallow Magmatic Plumbing System of the Deccan Traps, Evidence from Plagioclase Megacrysts and Their Host Lavas

We investigate the shallow plumbing system of the Deccan Traps Large Igneous Province using rock and mineral data from Giant Plagioclase Basalt (GPB) lava flows from around the entire province, but with a focus on the Saurashtra Peninsula, the Malwa Plateau, and the base and top of the Western Ghats (WG) lava pile. GPB lavas in the WG typically occur at the transition between chemically distinct basalt formations. Most GPB samples are evolved basalts, with high Fe and Ti contents, and show major and trace elements and Sr-Nd-Pb isotopic compositions generally similar to those of previously studied Deccan basalts. Major element modeling suggests that high-Fe, evolved melts typical of GPB basalts may derive from less evolved Deccan basalts by low-pressure fractional crystallization in a generally dry magmatic plumbing system. The basalts are strongly porphyritic, with 6–25% of mm- to cm-sized plagioclase megacrysts, frequently occurring as crystal clots, plus relatively rare olivine and clinopyroxene. The plagioclase crystals are mostly labradoritic, but some show bytownitic cores (general range of anorthite mol%: 78–55). A common feature is a strong Fe enrichment at the plagioclase rims, indicating interaction with an Fe-rich melt similar to that represented by the matrix compositions (FeOt up to 16–17 wt%). Plagioclase minor and trace elements and Sr isotopic compositions analyzed by laser ablation inductively coupled plasma mass spectrometry show evidence of a hybrid and magma mixing origin. In particular, several plagioclase crystals show variable 87 Sr/ 86 Sr i , which only partially overlaps with the 87 Sr/ 86 Sr i of the surrounding matrix. Diffusion modeling suggests residence times of decades to centuries for most plagioclase megacrysts. Notably, some plagioclase crystal clots show textural evidence of deformation as recorded by electron back-scatter diffraction analyses and chemical maps, which suggest that the plagioclase megacrysts were deformed in a crystal-rich environment in the presence of melt. We interpret the plagioclase megacrysts as remnants of a crystal mush originally formed in the shallow plumbing system of the Deccan basalts. In this environment, plagioclase acquired a zoned composition due to the arrival of chemically distinct basaltic magmas. Prior to eruption, a rapidly rising but dense Fe-rich magma was capable of disrupting the shallow level crystal mush, remobilizing part of it and carrying a cargo of buoyant plagioclase megacrysts. Our findings suggest that basaltic magmas from the Deccan Traps, and possibly from LIPs in general, are produced within complex transcrustal magmatic plumbing systems with widespread crystal mushes developed in the shallow crust.

Journal of Petrology↗
USGS2021

Hydrous pyrolysis of New Albany Shale: A study examining maturation changes and porosity development

The characterization of nanoscale organic structures has improved our understanding of porosity development within source-rock reservoirs, but research linking organic porosity evolution to thermal maturity has generated conflicting results. To better understand this connection, an immature (0.25% solid bitumen reflectance; BR o ) sample of the New Albany Shale was used in four isothermal hydrous pyrolysis (HP) experiment sequences at 300°, 320°, 340°, and 370°C, with residues collected periodically for a maximum of 103 days. The HP residues, along with the original immature sample and two naturally matured (1.49 and 1.56% BR o ) New Albany Shale samples were analyzed for organic petrology, total organic carbon (TOC) content, and organic porosity evaluation using correlative light and electron microscopy (CLEM). All of the HP series increased in thermal maturity with increasing duration of pyrolysis, though reflectance for each series plateaued within 25 days of maturation. Initially, TOC in the HP residues decreases (from 14.24 wt. %) with increasing thermal maturity until ∼1.0% BR o where TOC remains at ∼9–10 wt. % for all remaining residues. Qualitative CLEM observations within the 50–100 day 300° and 340°C HP sequences (0.95–1.70% BR o ), and the naturally matured samples, develop organic porosity in smaller (<5 μm in diameter), void-filling solid bitumen that occurs in spaces between clays and other fine-grained minerals. The 370°C HP residues developed significant organic porosity, relative to the other HP temperature series in all solid bitumen accumulations regardless of size. Overall, the study indicates that temperature and duration of artificial maturation play an important role in the abundance of pores in the HP residues. This work expands on our understanding of the conditions needed for the generation and development of organic porosity in the New Albany Shale and potentially in other marine source-rock petroleum systems.

Illinois, Indiana↗
USGS2021

A review of spatially resolved techniques and applications of organic petrography in shale petroleum systems

This review examines new techniques and applications of organic petrography in source-rock reservoir petroleum systems that have occurred along with development of the global ‘shale revolution’ in energy resources. The review is limited to techniques and instrumentation that provide spatially resolved information, typically at or below microscales, for dispersed organic matter occurring in situ in samples of shale and mudrock. A brief summary of ion beam sample preparation is followed by discussion of the most common analytical techniques and applications. Advantages and limitations of each technique, including requisite sample preparation, types of information generated [e.g., molecular or elemental (isotopic) abundance], sensitivity, and resolution are discussed. In a few cases, techniques not yet applied to organic petrology of shale or mudrock are described (e.g., X-ray photoelectron spectroscopy imaging), in anticipation of near-term future application. The most common in situ techniques applied for characterization of organic matter in shale and mudrock include optical (including fluorescence) and electron microscopies, Raman, fluorescence, and infrared spectroscopies, and surficial measurements via force microscopy. Techniques that show growing application to organic petrography of shale include tip-enhanced photothermal infrared spectroscopy, mass spectrometry imaging, and synchrotron-based spectroscopies, among others. It is anticipated that the future of dispersed organic matter petrography will hold continued development of integrated instrument techniques (e.g., simultaneous or sequential correlative microscopies and/or spectroscopies of the same location), increased instrumental resolution, increased use of multiscale and multimodal organic petrography investigations, and three-dimensional imaging and chemical speciation mapping applications via multiple analytical approaches.

International Journal of Coal Geology↗
USGS1983

Distribution of oceanic and continental leads in the Arabian-Nubian Shield

New common lead data for feldspar, whole-rock, and galena samples from the Arabian-Nubian Shield, together with data from previous work, can be divided into two main groups. Group I leads have oceanic (mantle) characteristics, whereas group II leads have incorporated a continental-crustal component of at least early Proterozoic age. The group I leads are found in rocks from the Red Sea Hills of Egypt and the western and southern parts of the Arabian Shield. Group II leads are found in rocks from the northeastern and eastern parts of the Arabian Shield, as well as from the southeastern Shield near Najran. They are also found in rocks to the south in Yemen, to the east in Oman, and to the west at Aswan, Egypt. This distribution of data suggests that the Arabian-Nubian Shield has an oceanic core flanked by rocks that have developed, at least in part, from older continental material. Two mechanisms are suggested by which this older lead component could have been incorporated into the late Proterozoic rocks, and each may have operated in different parts of the Shield. The older lead component either was derived directly from an underlying early Proterozoic basement or was incorporated from subducted pelagic sediments or sediments derived from an adjacent continent. New U-Pb zircon data indicate the presence of an early Proterozoic basement southeast of Jabal Dahul in the eastern Arabian Shield. These data, together with 2,000-Ma-old zircons from the Al Amar fault zone, verify the implication of the common lead data that at least a part of the eastern Arabian Shield has an older continental basement. Because continental margins are particularly favorable locations for development of ore deposits, these findings may have important economic implications, particularly for tin, tungsten, and molybdenum exploration. ?? 1983 Springer-Verlag.

Contributions to Mineralogy and Petrology↗
USGS2015

Petrologic testament to changes in shallow magma storage and transport during 30+ years of recharge and eruption at Kīlauea Volcano, Hawai‘i

Petrologic monitoring of Kīlauea Volcano from January 1983 to October 2013 has yielded an extensive record of glass, phenocryst, melt inclusion, and bulk-lava chemistry from well-quenched lava. When correlated with 30+ years of geophysical and geologic monitoring, petrologic details testify to physical maturation of summit-to-rift magma plumbing associated with sporadic intrusion and prolonged magmatic overpressurization. Changes through time in bulk-lava major- and trace-element compositions, along with glass thermometry, record shifts in the dynamic balance of fractionation, mixing, and assimilation processes inherent to magma storage and transport during near-continuous recharge and eruption. Phenocryst composition, morphology, and texture, along with the sulfur content of melt inclusions, constrain coupled changes in eruption behavior and geochemistry to processes occurring in the shallow magmatic system. For the first 17 years of eruption, magma was steadily tapped from a summit reservoir at 1–4 km depth and circulating between 1180 and 1200°C. Furthermore, magma cooled another 30°C while flowing through the 18 km long rift conduit, before erupting olivine-spinel-phyric lava at temperatures of 1150–1170°C in a pattern linked with edifice deformation, vent formation, eruptive vigor, and presumably the flux of magma into and out of the summit reservoir. During 2000–2001, a fundamental change in steady state eruption petrology to that of relatively low-temperature, low-MgO, olivine(-spinel)-clinopyroxene-plagioclase-phryic lava points to a physical transformation of the shallow volcano plumbing uprift of the vent. Preeruptive comagmatic mixing between hotter and cooler magma is documented by resorption, overgrowth, and compositional zonation in a mixed population of phenocrysts grown at higher and lower temperatures. Large variations of sulfur (50 to >1000 ppm) in melt inclusions within individual phenocrysts and among phenocrysts in most samples provide an unequivocal glimpse of rapid crystal growth amid sulfur degassing at <30 MPa in a turbulent preeruptive environment. We speculate that, during the last decade, one or more shallow open-system reservoirs developed along the conduit between the summit and Pu‘u ‘Ō‘ō and now serve to buffer the magmatic throughput associated with ongoing recharge and eruption. Lava with identical trace-element signatures erupted simultaneously at the summit and at Pu‘u ‘Ō‘ō from 2008 to 2013 confirms magmatic continuity between the vents. Complementary changes in compositions of matrix glasses, phenocrysts, and melt inclusions of summit tephra are mirrored by similar changes in contemporaneous rift lava at eruption temperatures 20–35°C lower than those at the summit. Petrologic parameters measured at opposite ends of the shallow magmatic plumbing system are both correlated with summit deformation, demonstrating that effects of summit magma chamber pressurization are translated throughout interconnected magma pathways in the shallow edifice.

Hawaii↗
USGS1979

Inverse grading and hydraulic equivalence in grain-flow deposits

Inversely graded grain-flow deposits are characterized by a hydraulic equivalence that differs from that based on settling velocities or entrainment. Dispersive equivalence, derived from the dispersive pressure hypothesis on how inverse grading develops, was found to agree reasonably well with observed relationships between grain sizes and densities in grain-flow deposits. Furthermore, observed relationships in deposits formed in subaerial and subaqueous environments were found to be independent of fluid density as is required by dispersive equivalence. The results suggest that dispersive pressure controls the development of the inverse grading common to beach foreshore laminations, slip-face foreset strata, the basal parts of some coarse-grained turbidites, and other diverse deposits.

Journal of Sedimentary Petrology↗
USGS1986

Lower crustal xenoliths, Chinese Peak lava flow, central Sierra Nevada

An assemblage of pyroxenite, peridotite, and mafic granulite xenoliths contained in the toe of a 10 Ma trachybasalt flow remnant overlying Late Cretaceous granitoids indicates the presence of a mafic-ultramafic complex beneath the Sierra Nevada batholith. Olivine-free pyroxenites that include orthopyroxenites, websterites, and clinopyroxenites are dominant. Primary igneous textures are displayed by some pyroxenites, but commonly are masked by recrystallization. Fe-rich harzburgites and lherzolites are rare. A few of the ultramafic xenoliths contain ovoid opaque patches that are apparently pseudomorphs after garnet and have pyralspite garnet compositions. A pressure corresponding to a lower crustal depth of approximately 40 km has been determined from two of these xenoliths using a garnet-orthopyroxene geobarometer. Abundant mafic granulites can be subdivided into those containing 12 per cent or less A 12 O 3 and chemically gradational with pyroxenites and others containing more than 15 per cent A 12 O 3 and showing considerable scatter on oxide variation diagrams. The high-alumina granulite xenoliths have relatively low 87 Rb/ 86 Sr but high 87 Sr/ 86 Sr, whereas low-alumina and ultramafic xenoliths have a wide range of 87 Rb/ 86 Sr, but lower 87 Sr/ 86 Sr; the isotopic data indicate an age for the complex roughly the same as that of overlying granitoid plutons. However, the granitoids have initial 87 Sr/ 86 Sr ratios intermediate between the high-alumina and ultramafic xenoliths, suggesting that they may have resulted from mixing of basaltic magma, represented by the ultramafics, and crustal materials, with subsequent crystal fractionation. The trachybasalt may represent a partial melt of the ultramafic rocks. Rocks analogous to the Chinese Peak xenoliths are exposed in the Giles complex of central Australia, a series of several deformed layered mafic and ultramafic intrusions, emplaced in a granulite facies terrain. Contemporaneous development of mafic-ultramafic complexes and the Sierra Nevada batholith may explain the present day thick (˜ 50 km) crust in this region

Journal of Petrology↗
USGS2017

Emplacement of Holocene silicic lava flows and domes at Newberry, South Sister, and Medicine Lake volcanoes, California and Oregon

This field guide for the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly 2017 focuses on Holocene glassy silicic lava flows and domes on three volcanoes in the Cascade Range in Oregon and California: Newberry, South Sister, and Medicine Lake volcanoes. Although obsidian-rich lava flows have been of interest to geologists, archaeologists, pumice miners, and rock hounds for more than a century, many of their emplacement characteristics had not been scientifically observed until two very recent eruptions in Chile. Even with the new observations, several eruptive processes discussed in this field trip guide can only be inferred from their final products. This makes for lively debates at outcrops, just as there have been in the literature for the past 30 years. Of the three volcanoes discussed in this field guide, one (South Sister) lies along the main axis defined by major peaks of the Cascade Range, whereas the other two lie in extensional tectonic settings east of the axis. These two tectonic environments influence volcano morphology and the magmatic and volcanic processes that form silicic lava flows and domes. The geomorphic and textural features of glass-rich extrusions provide many clues about their emplacement and the magma bodies that fed them. The scope of this field guide does not include a full geologic history or comprehensive explanation of hazards associated with a particular volcano or volcanic field. The geochemistry, petrology, tectonics, and eruption history of Newberry, South Sister, and Medicine Lake volcanic centers have been extensively studied and are discussed on other field excursions. Instead, we seek to explore the structural, textural, and geochemical evolution of well-preserved individual lava flows—the goal is to understand the geologic processes, rather than the development, of a specific volcano.

California, Oregon↗
USGS2007

Iron Hill (Powderhorn) carbonatite complex, Gunnison County, CO - A potential source of several uncommon mineral resources

The Iron Hill (Powderhorn) carbonatite complex is a 31-kM2 (12-sq mile) alkalic intrusion located about 35 km (22 miles) south-southwest of Gunnison, CO. The intrusion has been well studied and described because of its classic petrology and architecture ofa carbonatite-alkalic complex. The complex is also noteworthy because it contains enrichments of titanium, rare earth elements, thorium, niobium (columbium), vanadium and deposits of vermiculite and nepheline syenite. In particular, the complex is thought to host the largest titanium and niobium resources in the United States, although neither has been developed. It may be economic to extract multiple resources from this complex with a well-coordinated mine and mill plan.

Mining Engineering↗