USGS Science⌕ Search

SEARCH · USGS Science

Results for “Civil Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2023

Maps of elevation of top of Pierre Shale and surficial deposit thickness with hydraulic properties from borehole geophysics and aquifers tests within and near Ellsworth Air Force Base, South Dakota, 2020–21

The U.S. Geological Survey, in cooperation with the U.S. Air Force Civil Engineer Center, collected borehole geophysical data and completed simple aquifer tests to estimate the thickness and hydraulic properties of surficial deposits. The purpose of data collection was to create generalized contour maps of Pierre Shale elevation and surficial deposit thickness within and near Ellsworth Air Force Base (study area). Natural gamma and electromagnetic induction data were collected to refine or determine surficial deposit thickness at selected wells. Additionally, data from previous geophysical studies and driller logs were compiled and combined with results from natural gamma and electromagnetic induction data to provide a more spatially complete image of the subsurface. Borehole nuclear magnetic resonance (bNMR) data were collected to estimate hydraulic conductivity and water content of surficial deposits overlying Pierre Shale. Simple aquifer tests using water slugs (slug tests) were completed to estimate hydraulic conductivity of surficial deposits, and results were compared to hydraulic conductivity estimates from bNMR data. All data used to construct maps and estimate hydraulic properties are provided in an accompanying U.S. Geological Survey data release (available at https://doi.org/10.5066/P9FLR79F ). Generalized contour maps were constructed using results from 26 borehole geophysical logs, 35 geophysical transects from previous studies, and 304 wells with driller logs. Pierre Shale elevation generally followed land-surface topography, sloping from high elevations in the north to lower elevations in the south. Topographic highs of Pierre Shale, where present, could act as groundwater divides that potentially affect groundwater flow direction. Surficial deposit thickness varied spatially and ranged from 0 to 86 feet. Surficial deposits generally were thickest in higher elevation areas near ephemeral streams in the northern part of the study area. Hydraulic conductivity estimated from bNMR results using two analytical methods ranged from 0.1 to 2,314 feet per day, whereas hydraulic conductivity estimated from slug tests ranged from 0.001 to 193 feet per day. Hydraulic conductivity estimates from slug tests were plotted with surficial deposit thickness contours instead of bNMR estimates because bNMR estimates were determined to overestimate hydraulic conductivity. Hydraulic conductivity values generally were greater in the southwestern part of study area than the northeastern part.

South Dakota↗
USGS2023

Potentiometric surface map of the Southern High Plains aquifer in the Cannon Air Force Base area, Curry County, New Mexico, 2020

Declining water levels and the potential impact on water resources on and around Cannon Air Force Base (AFB), New Mexico, has necessitated an up-to-date review of the potentiometric surface to evaluate the availability of water resources for future use. Analysis of groundwater-flow directions and hydraulic gradients can provide an understanding of depletion by heavy groundwater pumping and recharge through playa lakes, as well as the relationship between the groundwater levels and underlying geology. The objectives of this study, conducted by the U.S. Geological Survey in cooperation with the U.S. Air Force Civil Engineer Center, are to assist Cannon AFB in understanding and interpreting current and local hydrologic conditions and to evaluate groundwater-level change from 2015 to 2020 using new and historical data. A groundwater potentiometric surface contour map was constructed to better understand the Southern High Plains aquifer around Cannon AFB and to show the altitude of the water-table surface and groundwater-flow patterns. Four hydrographs were created from periodic measurements of groundwater levels in wells on and around Cannon AFB to provide information about historical groundwater-level changes and visualize trends from the water-level records. The long-term trend present in all four hydrographs is a steady decline in groundwater levels, with some areas declining faster than others. The groundwater-level change map presented in this study provides a visual representation of the change in groundwater level from the winter 2015 to winter 2020 measuring events. Results show that among corresponding wells measured in 2015 and 2020, 50.7 percent indicated a decline in water levels, 29.9 percent indicated neutral water levels, and 19.4 percent indicated a rise in water levels. The region to the north of the groundwater trough on Cannon AFB contained most of the groundwater-level rises, whereas the regions located near the trough and just west of Clovis, N. Mex., contained most of the declines. These results suggest that continued monitoring of declining groundwater levels in the area would provide valuable decision-support information for assessing the sustainability of this water resource.

New Mexico↗
USGS2019

Use of a Numerical Model to Simulate the Hydrologic System and Transport of Contaminants Near Joint Base Cape Cod, Western Cape Cod, Massachusetts

Historical training and operational activities at Joint Base Cape Cod (JBCC) on western Cape Cod, Massachusetts, have resulted in the release of contaminants into an underlying glacial aquifer that is the sole source of water to the surrounding communities. Remedial systems have been installed to contain and remove contamination from the aquifer. Groundwater withdrawals for public supply are expected to increase as the region continues to urbanize. Increases in water-supply withdrawals and wastewater return flow likely will affect the hydrologic system around JBCC and could affect the transport of any contamination that may remain in the aquifer following remediation of contamination from the JBCC. The U.S. Geological Survey, in cooperation with the Air Force Civil Engineer Center, developed a numerical, steady-state regional model of the Sagamore flow lens on western Cape Cod and evaluated the potential effects of future (2030) groundwater withdrawals on water levels, streamflows, hydraulic gradients, and advective transport near the JBCC. The aquifer consists generally of sandy sediments underlain by impermeable bedrock and is bounded laterally by a freshwater/saltwater interface. Data on the altitude of the bedrock surface, position of the freshwater/saltwater interface, lithology of the aquifer, spatial distribution of recharge, and hydrologic boundaries were incorporated into the three-dimensional, finite-difference groundwater flow model. Some inputs into the numerical model—aquifer properties, leakances, and recharge—are represented as parameters to facilitate estimation of optimal parameter values in an inverse calibration. A hybrid parameterization scheme, with both zones of piecewise constancy and pilot points, is used to represent hydraulic conductivity; other adjustable parameters include recharge, boundary leakance, and porosity. Data on water levels, the distribution of subsurface contamination, and groundwater ages were compiled, evaluated, and used to develop observations of long-term average hydraulic gradients and advective-transport patterns. These observations of steady-state hydrologic conditions were combined with the parameterized groundwater model in an inverse calibration to estimate model parameters that best fit the observations. Current (2010) and future (2030) conditions were simulated in the calibrated model to characterize the groundwater flow system and to determine potential effects of increased groundwater withdrawals on advective-transport patterns at the JBCC. Groundwater flow and advective transport are radially outward from a water-table divide in the northern part of the JBCC; flow diverges from the divide toward all points of the compass. Most groundwater flow and contaminant transport occur in shallow parts of the aquifer. On average, about one-half of the groundwater flux occurs in the shallowest 20 percent of the saturated thickness; shallow flow is even more predominant near streams and lakes. Projected (2030) increases in groundwater withdrawals decrease water levels by a maximum of about 1.2 feet in the northern part of the JBCC; drawdowns exceeding 1 foot generally are limited to areas near the largest increases in withdrawals, such as in the northern part of the JBCC, near Long Pond in Falmouth, and in eastern Barnstable. Streamflow decreases average about 6 percent; the largest decreases are in areas with the largest drawdowns. Changes in hydraulic-gradient directions at the water table exceed 1 degree in about 13 percent of the aquifer, generally near groundwater divides where gradient magnitudes are small and near large groundwater withdrawals. Predictions of advective transport from randomly selected locations at the water table are similar for current (2010) and future (2030) groundwater withdrawals. The results indicate that projected increases in groundwater withdrawals affect water levels and streamflows, but effects on hydraulic gradients and advective transport at the JBCC likely are small. Several underlying assumptions inherent in the model, including observations and weights used in the calibration, representation of local-scale heterogeneity, and simulation of the freshwater/saltwater interface, could affect model calibration and predictions; these assumptions were evaluated with alternative models and alternative inverse calibrations. Eight alternative calibrations were performed in which different, but reasonable, observations and weights were used. The preferred calibrated model had the best overall fit to the observations. Fine-grained silty sediments occur in many parts of the aquifer, and silt lenses can locally affect hydraulic gradients. A set of alternative models in which silts were represented with different correlation distances and hydraulic conductivities indicated that explicitly representing silt lenses could affect model calibration but that the implicit representation of local-scale heterogeneity may be sufficient at the regional scale to represent regional-scale hydraulic gradients. For the coastal boundary, two alternative models representing silty and sandy seabeds and their associated interface positions were developed to test the importance of the assumed coastal-boundary condition. The two alternative models resulted in different predictions of streamflow—streamflows increase with smaller (silty) seabed leakances. However, predictions of advective transport, particularly near the JBCC, generally were similar between the alternative and preferred calibrated models, indicating that the seabed leakance and associated interface position at the coastal boundary does not affect simulations of advective transport in inland parts of the aquifer.

Massachusetts↗
USGS2021

Hydrogeology and gain/loss assessment of two lakes contaminated with per- and polyfluoroalkyl substances, vicinity of Joint Base McGuire-Dix-Lakehurst, New Jersey, 2020–21

Per- and polyfluoroalkyl substances (PFAS) have been identified in two lakes near Joint Base McGuire-Dix-Lakehurst (JBMDL) in New Jersey—Little Pine Lake in Pemberton Township and Pine Lake in Manchester Township. The streams that enter these lakes begin in or near JBMDL where sources of PFAS contamination are located. The U.S. Geological Survey, in cooperation with the U.S. Air Force Civil Engineer Center, performed a study of the hydrogeology and the gaining or losing conditions associated with these lakes. Hydrogeologic characteristics in the vicinity of both lakes were assessed using qualitative vertical hydraulic profiling of the subsurface. Groundwater was pumped from test intervals at various depths below land surface, then groundwater levels were measured until they recovered to static conditions. Low permeability aquifer intervals were identified within the aquifer underlying both lakes, consistent with silty and (or) clayey subunits of the Kirkwood-Cohansey aquifer system indicated on geophysical and lithologic logs. Gaining or losing conditions between groundwater and lake surface water were assessed with continuous monitoring of water levels and temperature in the lakes and in three piezometers per lake screened at different depths in the underlying aquifer from August 2020 through May 2021. At Little Pine Lake, surface water levels were consistently lower than groundwater levels, which is indicative of a gaining condition with groundwater flowing into the lake. Gaining conditions also support the lack of diurnal temperature fluctuations observed in groundwater, but poor response of surface-water temperature prevents complete analysis. The potential for losing conditions at other locations around Little Pine Lake necessitates further assessment in regard to possible PFAS contamination of groundwater in the underlying aquifer. Temperature results were inconclusive at Pine Lake, but surface water levels were consistently higher than groundwater levels throughout the monitoring period, which indicates a losing condition with lake water flowing into the underlying aquifer. Because of the downward vertical hydraulic gradient identified at Pine Lake, there is a strong possibility that PFAS in the lake water has also contaminated groundwater in its vicinity.

New Jersey↗
USGS2022

Mapping the altitude of the top of the Dockum Group and paleochannel analysis using surface geophysical methods on and near Cannon Air Force Base in Curry County, New Mexico, 2020

The hydrogeology on and near Cannon Air Force Base (AFB) in eastern New Mexico was assessed to gain a better understanding of preferential groundwater flow paths through paleochannels. In and near the study area, paleochannels incised the top surface of the Dockum Group (Chinle Formation) and were subsequently filled in with electrically resistive coarse-grained sediments of the overlying Ogallala Formation, resulting in a preferential groundwater flow path in the form of a paleochannel network. A better understanding of the spatial characteristics of this preferential groundwater flow path is needed to support ongoing efforts to remediate groundwater contamination at Cannon AFB. Therefore, the U.S. Geological Survey, in cooperation with the U.S. Air Force Civil Engineer Center, used surface geophysical resistivity methods and data compiled from previous studies to better understand the spatial distribution and characteristics of the paleochannel network incised into the top of the Dockum Group. Previous studies have shown these paleochannels incised into the top of the Dockum Group with increasing resolution, but limited borehole data on and near Cannon AFB continued to make accurately mapping the top of Dockum Group challenging. For this study, surface geophysical resistivity measurements in the form of time-domain electromagnetic soundings made by the U.S. Geological Survey were used in conjunction with data previously published by Architecture, Engineering, Construction, Operations, and Management and borehole data compiled from the New Mexico Water Rights Reporting System database to prepare an updated map of the top of the Dockum Group that includes the location and characteristics of paleochannels incised into the top of the Dockum Group (Chinle Formation). A total of 149 borehole picks (determinations of the tops and bases of geologic units and their hydrogeologic-unit equivalents) were obtained from previous studies, along with 72 additional borehole picks from the New Mexico Water Rights Reporting System database and 43 picks from newly collected time-domain electromagnetic soundings. The data were gridded and contoured using Oasis Montaj v. 9.8.1. The updated map of the top of Dockum Group has many areas of uncertainty greater than 20 feet, because there are not enough data for the gridding process to reliably determine a value. However, this interpretation of the altitude of the top of the Dockum Group represents a substantial improvement in data resolution compared to previous studies. Two methodologies were used to evaluate paleochannels incised in the top of the Dockum Group across the study area: (1) trend-removal grid analysis and (2) analysis with Esri’s ArcMap Hydrology toolset. These two paleochannel analysis techniques show groundwater flow direction as well as areas having the deepest saturated thickness. Hydrologically, these techniques show where aquifer storage is highest (in the deepest parts of the paleochannel network), as well as the spatial distribution of preferential groundwater flow paths (the paleochannels). The analyses indicate a large paleochannel trending to the southeast, with smaller channels feeding in from the west. Areas where groundwater management could be more beneficial are indicated by locations where these flow lines intersect the deeper parts of the paleochannel.

New Mexico↗
USGS2023

Potential effects of projected pumping scenarios on future water-table elevations near Kirtland Air Force Base in Albuquerque, New Mexico

The U.S. Geological Survey, in cooperation with the Air Force Civil Engineer Center, simulated different groundwater pumping scenarios from 2016 to 2050 to determine the potential future changes in groundwater levels in areas around the Kirtland Air Force Base Bulk Fuels Facility and an ethylene dibromide (EDB) plume. Projections of water supply and demand created by the Albuquerque Bernalillo County Water Utility Authority were used to develop the future groundwater pumping scenarios used as inputs for a refined local-scale model within the updated Middle Rio Grande Basin regional model. The simulated water-table elevations in model cells that contain the EDB plume in the medium demand and medium supply scenario rose 29 feet (ft) until 2035, then remained within 10 ft of that elevation through 2050, whereas the water-table elevations in the high demand and low supply scenario rose about 26 ft until 2035 and then decreased by more than 10 ft. Simulated water-table elevations in the low demand and high supply scenario continued to rise throughout most of the future simulation period and peaked at about 44 ft over the 2016 water-table elevation. All of the scenarios ended the future simulation period with higher simulated water-table elevations than at the beginning of the future simulation period. Simulations that represented the potentially highest and lowest volume of groundwater pumping near the EDB plume by adjusting the spatial distribution of pumping had similar simulated water-table elevations as the nonadjusted scenarios, with maximum water-table elevation changes that only differed by about 2 ft from the nonadjusted scenarios. Consideration should be taken when using these model results to inform decisions because the model results are subject to uncertainty from many different sources, including uncertainty in the future pumping scenarios as well as the model itself because of the simplification of the hydrogeologic system.

New Mexico↗
USGS2024

Groundwater hydrology, groundwater and surface-water interactions, aquifer testing, and groundwater-flow simulations for the Fountain Creek alluvial aquifer, near Colorado Springs, Colorado, 2018–20

From 2018 through 2020, the U.S. Geological Survey, in cooperation with the Air Force Civil Engineering Center, conducted an integrated study of the Fountain Creek alluvial aquifer located near Colorado Springs, Colorado. The objective of the study was to characterize hydrologic conditions for the alluvial aquifer pertinent to the potential for transport of solutes. Specific goals of this report were to characterize the groundwater hydrology of the area, to quantify groundwater and surface-water interactions, to estimate hydraulic properties of the aquifer using aquifer testing, and to complete numerical simulations of groundwater flow. Synoptic groundwater-level elevation measurements completed throughout this study, and as part of other U.S. Geological Survey programs between 1994 and 2020, indicate groundwater-level elevations fluctuate on annual and interannual timeframes. Groundwater-level fluctuations likely were caused by temporally variable groundwater recharge and discharge components in the area, with many wells showing maximum groundwater-level elevations during the winter months (November through March). From an interannual perspective, groundwater-level fluctuations appear to have reached maximum values during 2000 to 2003, decreased during 2003 to 2006, and remained relatively constant since that time, with the exception of several wells which have displayed rising groundwater-level elevations since 2018. Spatial evaluation of groundwater-level elevations indicates groundwater flow is generally from northeast to southwest within the vicinity of several alluvial paleochannels occurring along the northeastern margin of the aquifer. Within the center of the aquifer along Fountain Creek, groundwater flow is generally from north to south, approximately paralleling surface-water flow. To quantitatively understand the potential effect of groundwater recharge and groundwater pumping on fluctuations in groundwater-level elevation, a statistical transfer-function-noise model was applied. Results of the statistical model indicate throughout most of the aquifer, fluctuations were primarily the result of recharge seasonality. In the main stem of the aquifer where groundwater pumping wells were more concentrated, however, groundwater-level elevation fluctuations were also attributable to groundwater pumping through time. Three-dimensional evaluation of the aquifer geometry near Fountain Creek was combined with synoptic streamflow measurement and accounting of stream gains and losses to evaluate groundwater and surface-water interactions in the study area. Streamflow gain or loss calculations indicate Fountain Creek both gains from and loses flow to the alluvial aquifer, and gaining or losing reaches of the stream may be partially controlled by the depth to bedrock near the stream. Reaches with streamflow gains tend to coincide with areas where the estimated depth to bedrock is decreasing, meaning the alluvial aquifer is likely thinning in these areas and groundwater-flow paths may be converging and discharging groundwater to the stream. Losing reaches tended to coincide with locally greater depth to bedrock where the alluvial aquifer is likely thicker and has greater storage potential for surface water lost from Fountain Creek. Results of aquifer testing indicate hydraulic conductivity, estimated from slug tests and single-well pumping tests, ranged from 0.32 to 1,410 feet per day (ft/d) and 4.13 to 664 ft/d, respectively. These results are similar to the range of values from previous aquifer tests in the study area. Hydraulic conductivities from aquifer testing for this study were generally greater than the estimates of previous slug tests and had a mean value less than the estimates from previous pumping tests. Spatial evaluation of aquifer testing results indicates hydraulic conductivity tends to be greater in the main stem of the alluvial aquifer and lower in paleochannels upgradient from the main stem of the aquifer. The spatial variation in hydraulic conductivity may be attributed to the geomorphologic processes that formed the alluvial aquifer. Compacted sediment in the paleochannels has not been potentially transported sufficient distance to cause grain-size sorting, resulting in a poorly sorted deposit and lower hydraulic conductivities. In the central portion of the alluvial aquifer, near Fountain Creek, the sediments have been transported farther from their source areas and are likely better sorted, removing finer grained sediments that would cause lower hydraulic conductivity. A numerical groundwater-flow model was calibrated for the Fountain Creek alluvial aquifer for 2000–19 to simulate water-budget components, groundwater-flow directions, and groundwater-flow paths. The model simulated precipitation recharge, groundwater and surface-water interactions, evapotranspiration, high-volume groundwater pumping by pumping wells, and external inflows and outflows occurring along the boundaries of the alluvial aquifer. Model calibration was completed using manual and automated approaches, the latter of which assisted in quantifying model results sensitivity to input parameters. The calibrated model corresponds well with groundwater-level elevation observations, with a mean residual (observed minus simulated groundwater-level elevation) equal to −0.60 feet. Simulated groundwater base flow to streams was typically within 10 percent of base flow estimated by independent methods. Groundwater and surface-water interactions represented the largest water-budget components of the aquifer, with the second largest groundwater discharge component coming from pumping wells. Groundwater and surface-water interactions represent both the largest gain and loss terms in the water budget, because these interactions differ spatially, meaning in some areas of the model domain groundwater is being recharged by streams, whereas in other areas, groundwater is discharged to streams. Estimates of advective groundwater-flow paths indicate pumping wells may capture groundwater recharged from losing streams and groundwater that flows into the main stem of the alluvial aquifer from paleochannels.

Colorado↗
USGS2026

Hydrogeologic conceptualization of the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory, Edwards Air Force Base, Antelope Valley, California, 2017–21

Research and testing within the Air Force Research Laboratory at Edwards Air Force Base in the southwestern Mojave Desert has been conducted since the 1950s. This testing requires large quantities of groundwater for cooling and operations involving hazardous constituents that have entered the groundwater. To better understand the potential movement of contaminants through the groundwater system, the U.S. Geological Survey entered into a cooperative agreement with the U.S. Air Force Civil Engineer Center with the purpose of (1) gaining a more detailed understanding of the hydraulic connection between the unconsolidated basin-fill sediment and the underlying weathered and crystalline bedrock and (2) investigating faults and their potential effect on groundwater flow. This study was specific to the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory. The refined hydrogeologic characterization was derived by evaluating surface geologic maps, a regional gravity model, new subsurface geophysical surveys, lithology data from boreholes, and groundwater-level data. Refinement of the hydrogeologic characterization of the study area involved developing a map of basin-fill sediment thickness, estimating the geometry and depth to bedrock, determining the presence of weathered bedrock material, and identifying the location of faults and subsurface structures. The thickness of basin-fill sediment was derived from a regional gravity model. Basin-fill sediment ranges from less than 20 feet (ft) thick to about 150 ft thick and increases substantially toward a deep structural basin in the northwestern part of the study area. The top of bedrock estimated from the new surface geophysical surveys is generally deeper than the top of bedrock from the regional gravity model. These differences in interpreted bedrock tops indicate that there may be a zone of weathered bedrock in the subsurface, overlying crystalline bedrock. Additional subsurface data evaluating the geometry and thickness of weathered bedrock are necessary for a comprehensive evaluation of weathered bedrock in the study area. Previously unmapped extensions of the Leuhman Fault, Spring Fault Zone, and Boron Gate Fault were identified in the new surface geophysical surveys. Evaluation of groundwater flow between bedrock and basin-fill sediment, and the effects of faults on groundwater flow, was done using groundwater-level data from 2020. The groundwater table was in crystalline bedrock throughout most of the Arroyos and Northeast Air Force Research Laboratory subareas, with a few exceptions where it was in basin-fill sediment and weathered bedrock. Basin-fill sediment, and likely weathered bedrock, was partially saturated in parts of the study area where basin-fill sediment was as thick as 150 ft. Weathered bedrock material may be present near the Spring Fault Zone, and if so, was likely saturated in 2020. The groundwater-level data near and within Spring Fault Zone indicate that the Spring Fault Zone acts as a vertical-along-strike conduit for, and as an across-strike impediment to, groundwater flow. In addition, steep groundwater-level gradients in the southeastern part of the study area indicate that a subsurface structure affecting groundwater flow could be related to the Leuhman Fault. Sufficient groundwater-level data were not available to conclusively determine if the Arroyos, Rich, and Boron Gate Faults, and their inferred extensions from the geophysical surveys, affect the movement or direction of groundwater flow.

California↗
USGS2001

Apparent chlorofluorocarbon age of ground water of the shallow aquifer system, Naval Weapons Station Yorktown, Yorktown, Virginia

Apparent ages of ground water are useful in the analysis of various components of flow systems, and results of this analysis can be incorporated into investigations of potential pathways of contaminant transport. This report presents the results of a study in 1997 by the U.S. Geological Survey (USGS), in cooperation with the Naval Weapons Station Yorktown, Base Civil Engineer, Environmental Directorate, to describe the apparent age of ground water of the shallow aquifer system at the Station. Chlorofluorocarbons (CFCs), tritium ( 3 H), dissolved gases, stable isotopes, and water-quality field properties were measured in samples from 14 wells and 16 springs on the Station in March 1997. Nitrogen-argon recharge temperatures range from 5.9°C to 17.3°C with a median temperature of 10.9°C, which indicates that ground-water recharge predominantly occurs in the cold months of the year. Concentrations of excess air vary depending upon geohydrologic setting (recharge and discharge areas). Apparent ground-water ages using a CFC-based dating technique range from 1 to 48 years with a median age of 10 years. The oldest apparent CFC ages occur in the upper parts of the Yorktown-Eastover aquifer, whereas the youngest apparent ages occur in the Columbia aquifer and the upper parts of the discharge area setting, especially springs. The vertical distribution of apparent CFC ages indicates that groundwater movement between aquifers is somewhat retarded by the leaky confining units, but the elapsed time is relatively short (generally less than 35 years), as evidenced by the presence of CFCs at depth. The identification of binary mixtures by CFC-based dating indicates that convergence of flow lines occurs not only at the actual point of discharge, but also in the subsurface. The CFC-based recharge dates are consistent with expected 3 H concentrations measured in the water samples from the Station. The concentration of 3H in ground water ranges from below the USGS laboratory minimum reporting limit of 0.3 to 15.9 tritium units (TU) with a median value of 10.8 TU. Water-quality field properties are highly variable for ground water with apparent CFC ages less than 15 years because of geochemical processes within local flow systems. Ground water with apparent CFC ages greater than 15 years represents more stable conditions in subregional flow systems. The range of apparent CFC ages is slightly greater than the ranges in time of travel of ground water calculated for shallow wells (less than 60- feet deep) from flow-path analysis. Calculated travel times to springs can be up to two orders of magnitude greater than the CFC-based apparent ages. Reasonable assumptions of values for hydraulic parameters can result in substantial overestimates for time of travel to springs. Recharge rates computed from apparent CFC ages range from 0.29 to 0.89 feet per year (ft/ yr) with an average value of 0.54 ft/yr. The analysis of apparent CFC ages in conjunction with geohydrologic data indicates that young water (less than 50 years) is present at depth (nearly 120 feet) and that both local and subregional flow systems occur in the shallow aquifer system at the Station. The addition of the dimension of time to the three-dimensional framework of Brockman and others (1997) will benefit current (2001) and future remediation activities by providing estimates of advective transport rates and how these rates vary depending upon geohydrologic setting and position within the ground-water-flow system. Estimated ground-water apparent ages and recharge rates can be used as calibration criteria in simulations of ground-water flow on the Station to refine and constrain future ground-water-flow models of the shallow aquifer system.

Virginia↗
USGS1995

Ground-water recharge in Escambia and Santa Rosa Counties, Florida

Ground water is a major component of Florida's water resources, accounting for 90 percent of all public-supply and self-supplied domestic water withdrawals, and 58 percent of self-supplied commercial-industrial and agricultural withdrawals of freshwater (Marella, 1992). Ground-water is also an important source of water for streams, lakes, and wetlands in Florida. Because of their importance, a good understanding of these resources is essential for their sound development, use, and protection. One area in which our understanding is lacking is in characterizing the rate at which ground water in aquifers is recharged, and how recharge rates vary geographically. Ground-water recharge (recharge) is the replenishment of ground water by downward infiltration of water from rainfall, streams, and other sources (American Society of Civil Engineers, 1987, p. 222). The recharge rates in many areas of Florida are unknown, of insufficient accuracy, or mapped at scales that are too coarse to be useful. Improved maps of recharge rates will result in improved capabilities for managing Florida's ground-water resources. In 1989, the U.S. Geological Survey, in cooperation with the Florida Department of Environmental Regulation, began a study to delineate high-rate recharge areas in several regions of Florida (Vecchioli and others, 1990). This study resulted in recharge maps that delineated areas of high (greater than 10 inches per year) and low (0 to 10 inches per year) recharge in three counties--Okaloosa, Pasco, and Volusia Counties--at a scale of 1:100,000. This report describes the results of a similar recharge mapping study for Escambia and Santa Rosa Counties (fig. 1), in which areas of high- and low-rates of recharge to the sand-and-gravel aquifer and Upper Floridan aquifer are delineated. The study was conducted in 1992 and 1993 by the U.S. Geological Survey in cooperation with the Florida Department of Environmental Protection.

Florida↗
USGS1939

Summary of records of surface waters of Texas, 1898-1937

The first gaging station In Texas urns established on the Rio Grande at El Paso on May 10, 1889, under the provisions of the Act of Congress of October 2, 1888, which authorized the organization of the Irrigation Survey by the United States Geological Survey. A few miscellaneous measurements of streams In central Texas, between Del Rio and Austin, were made, by C. C. Babb of the Geological Survey in 1894, 1895, and 1896. In 1897 T. U. Taylor, professor of civil engineering at the University of Texas, at Austin, began a systematic study for the Geological Survey of as many of the principal streams as the limited funds would permit. In the same year the American section of the International Water Commission began collecting records of flow of the Rio Grande in Texas. Records for the Rio Grande and some of its tributaries from 1897 to 1913, inclusive, collected by that commission under the immediate direction of W. W. Follett, United States consulting engineer, are contained in Geological Survey Water-supply Paper 358. It was not until 1915, when the State Legislature appropriated funds for stream measurement investigations by the Texas Board of Water Engineers, that a substantial beginning toward the systematic collection of stream-flow records was made. The work has been continued and enlarged gradually so that records have been collected at about 230 stations in Texas. In September 1937 86 gaging stations were being maintained in Texas by the Geological Survey and the cooperating agencies. Many miscellaneous discharge measurements have been made at other points. The records collected by the Geological Survey from 1889 to 1937 are now scattered through more than 50 reports, many of which are out of print.

Water Supply Paper↗
USGS2026

The path to FAIR research models: Lessons learned

Numerical modeling of Earth surface processes emerged as an important scientific tool in the late 1960s to mid-1970s, driven by the development of finite element methods in computer science. These advancements, initially applied in civil engineering, enabled scientists to simulate complex geological phenomena. At that time, models were often only described in publications, access was limited to researchers with direct connections to the developers, and the code was rarely documented for reuse, limiting their application beyond the original research context. The FAIR principles (Findability, Accessibility, Interoperability, and Reusability) as applied to data began to take shape in the 21st century with the rise of open science, digital repositories, and standardized data sharing frameworks. In the late 2010s, grassroots movements began to apply some of the FAIRness goals to numerical models. Subsequently, more formalized FAIR model principles were developed that addressed the specific needs of the scientific modeling community, resulting in the formulation of the FAIR principles for research software (FAIR4RS). In this study, we examine the development and implementation of strategies by two geoscience research infrastructures – the CSDMS (Community Surface Dynamics Modeling System) Model Repository and the U.S. Geological Survey Model Catalog – to enhance the FAIRness of models guided by FAIR4RS. Some of the development and implementation efforts described predate the formalization of FAIR and FAIR4RS principles, making this an ongoing and adaptive process. We evaluate the temporal progression towards increased FAIR4RS alignment across three phases of research infrastructure development: prototype, refinement, and growth and iteration. Although certain principles were more straightforward to implement early in prototypes of the catalog infrastructures, others required broader community collaboration during refinement, and some continue to pose practical challenges in the growth and iteration phase. By tracing these dynamics, our aim is to provide insights that can guide other modeling initiatives in effectively adopting FAIR4RS principles within their communities.

Geoscientific Model Development↗
USGS2005

Rainfall-induced landslides in Puerto Rico: An overview

Rainfall-induced landslides are common in Puerto Rico (PR). The presence of steep slopes in mountainous terrain, coupled with weathered soils and intense rainfall, leads to severe slope-stability problems throughout the island. Episodic triggering events such as hurricanes and earthquakes further exacerbate these problems. All physiographic provinces of the island have experienced landslides. The stability of natural and man-made slopes is a serious concern for government authorities and the civil engineering community in Puerto Rico. This paper presents an overview of the rainfall induced landslide problem in PR, a summary of literature published on this subject, and proposes a rainfall intensity landslide threshold based on landslide events data from 1959 to 2003. This threshold can be used as part of a potential landslide warning system.

Conference Paper↗
USGS2019

Proposed multi-period response spectra and ground motion requirements of the 2020 Recommended Provisions and ASCE 7-22

This paper summarizes a comprehensive set of proposals to the Provisions Update Committee of the Building Seismic Safety Council that would incorporate multi-period response spectra (MPRS) in the 2020 edition of the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (2020 NEHRP Provisions) and related proposals to the ASCE 7-22 Seismic Subcommittee of the American Society of Civil Engineers for incorporation of MPRS in the ASCE Standard, ASCE/SEI 7-22, Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-22). Ultimately, the intent is that the proposed MPRS and related design requirements of ASCE 7-22 would be adopted, by reference, as part of the 2024 International Building Code.

Conference Paper↗
USGS2020

Procedures for developing multi-period response spectra at non-conterminous United States sites

This study complements proposals to the Provisions Update Committee of the Building Seismic Safety Council that would incorporate multi-period response spectra (MPRS) in the 2020 edition of the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (2020 NEHRP Provisions) and related proposals to the ASCE 7-22 Seismic Subcommittee of the American Society of Civil Engineers for incorporation of MPRS in ASCE Standard, ASCE/SEI 7-22, Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-22). Ultimately, the intent is that the proposed MPRS and related design requirements of ASCE 7-22 would be adopted, by reference, as part of the 2024 International Building Code. The technical basis and associated methods herein enable the U.S. Geological Survey (USGS) to develop MPRS for sites in non-conterminous U.S. regions for which seismic hazard analyses have not yet been updated by the USGS to fully define all 22 periods and eight site classes of interest in the MPRS related proposals for the 2020 NEHRP Provisions and ASCE 7-22. These regions include Alaska, Hawaii, Guam and the Northern Mariana Islands, Puerto Rico and the U.S. Virgin Islands, and American Samoa. The methods developed can be used to derive MPRS using only the three currently available ground motion parameters S S , S 1 , and T L for all nonconterminous United States regions of interest. The methods include models that characterize generic shapes of Risk-Targeted Maximum Considered Earthquake (MCE R ) ground motions as a function of these three parameters. For deriving MPRS that represent probabilistic MCE R ground motions, models are based on statistical analyses of large sample sets of probabilistic MCE R response spectra for Western United States (WUS) and Cascadia sites in California, Oregon, Washington (including Puget Sound), Idaho, and Nevada. For deriving MPRS that represent deterministic MCE R ground motions, models are based on sets of deterministic MCE R response spectra calculated using WUS shallow crustal ground motion models for earthquake magnitudes and shaking levels typical of sites governed by deterministic MCE R ground motions.

Alaska, American Samoa, Hawaii, Guam and the North↗
USGS2021

Multi-period response spectra

Multi-period response spectra (MPRS) are incorporated in the development of seismic design ground motions in the 2020 edition of the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (2020 NEHRP Provisions) and are approved for adoption in the American Society of Civil Engineers (ASCE) Standard, Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7-22). MPRS are incorporated in these design regulations because it was discovered that the standard spectral shape based on two periods and one reference site class was substantially understating spectral response in moderately long period structures located on soft soil sites where ground motion hazard is dominated by large magnitude events. These are the motions that are relevant to tall buildings in the Los Angeles region and of interest to the Los Angeles Tall Buildings Seismic Design Council (LATBSDC). The MPRS incorporation updated Chapters 11, 20, 21, and 22 of the 2020 NEHRP Provisions (a.k.a. FEMA P-2082); changes are described in detail in the commentary of FEMA P-2082. The MPRS also influenced the development of the 2018 U.S. Geological Survey (USGS) National Seismic Hazard Model (NSHM) for the conterminous U.S. because valid ground motion models for all periods and site classes of interest were required. FEMA P-2082 is complemented by the FEMA P-2078 technical report that provides a procedure for approximating MPRS outside of the conterminous U.S. This paper presents a condensed version of the relevant sections of FEMA P-2082 and FEMA P-2078 that would interest the LATBSDC.

Conference Paper↗
USGS2020

2018 and 2023 U. S. National Seismic Hazard Models

During 2017-2018, the National Seismic Hazard Model (NSHM) was updated by incorporating (1) new median ground motion models, new estimates of their epistemic uncertainties and aleatory variabilities, and new soil amplification factors for the central and eastern U.S., (2) amplification of long-period ground motions in deep sedimentary basins in the Los Angeles, San Francisco, Seattle, and Salt Lake City areas, (3) an updated seismicity catalog, which includes new earthquakes that occurred between 2012 and 2017, and (4) improved computer code and implementation details. Results show significantly increased ground shaking in many (but not all) locations across the central and eastern U.S., and increased ground shaking in the four urban areas (listed above) that overlie deep sedimentary basins in the western U.S. During 2019-2023, the NSHM will consider additional updates for the 2023 NSHM including: 3D simulations in urban areas of Los Angeles and Seattle, additional soil amplification models for other urban areas (e.g., eastern and southern coastal plains of the U.S., Reno, and Las Vegas), non-ergodic ground motion models that reconsider epistemic and aleatory uncertainty, topographic amplification, and new geological and geodetic models for faults. These maps will be considered by the Building Seismic Safety Council, American Society of Civil Engineers, and International Building Code committees for inclusion in upcoming building codes. Due to population growth, more people live and work in areas of moderate or high seismic hazard than ever before, leading to higher risk of undesirable consequences from future ground shaking.

conterminous United States↗
USGS2021

Earthquake risk of gas pipelines in the conterminous United States and its sources of uncertainty

Relatively little research has been conducted to systematically quantify the nationwide earthquake risk of gas pipelines in the US; simultaneously, national guidance is limited for operators across the country to consistently evaluate the earthquake risk of their assets. Furthermore, many challenges and uncertainties exist in a comprehensive seismic risk assessment of gas pipelines. As a first stage in a systematic nationwide assessment, we quantify the earthquake risk of gas transmission pipelines in the conterminous US due to strong ground shaking, including the associated uncertainties. Specifically, we integrate the US Geological Survey 2018 National Seismic Hazard Model, a logic tree–based exposure model, three different vulnerability models, and a consequence model. The results enable comparison against other risk assessment efforts, encourage more transparent deliberation regarding alternative approaches, and facilitate decisions on potentially assessing localized risks due to ground failures that require site-specific data. Based on the uncertainties approximated herein, the resulting sensitivity analyses suggest that the vulnerability model is the most influential source of uncertainty. Finally, we highlight research needs such as (1) developing more vulnerability models for regional seismic risk assessment of gas pipelines; (2) identifying, prioritizing, and measuring input pipeline attributes that are important for estimating seismic damage; and (3) better quantifying seismic hazards with their uncertainties at the national scale, for both ground failures and ground shaking.

conterminous United States↗