USGS Science⌕ Search

SEARCH · USGS Science

Results for “Alaska Boundary Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2024

Database and time series of nearshore waves along the Alaskan coast from the United States-Canada border to the Bering Sea

Alaska’s Arctic coast has some of the highest coastal erosion rates in the world, primarily driven by permafrost thaw and increasing wave energy. In the Arctic, a warming climate is driving sea ice cover to decrease in space and time. A lack of long-term observational wave data along Alaska’s coast challenges the ability of engineers, scientists, and planners to study and address threats and effects from wave-driven erosion and flooding. To overcome the lack of available observational wave data in the nearshore in this study by the U.S. Geological Survey, waves were downscaled with the Simulating WAves Nearshore numerical wave model (SWAN) for the hindcast period of 1979 to 2019 from the United States-Canada border to the Bering Sea utilizing nine model domains. For each domain, the model was forced at the open boundary with 2,500 representative “sea states,” which are likely combinations of significant wave heights, mean wave periods, mean wave directions, and wind speeds and directions. The sea states were obtained from the European Centre for Medium-Range Weather Forecasts “ERA5” dataset for reanalysis of winds and waves using a multivariant maximum-dissimilarity algorithm. The SWAN runs created a downscaled wave database at each grid point, which was used to reconstruct the 40-year time series in the nearshore along the 5- and 10-meter isobaths at locations approximately 400 m apart and corresponding to transects spaced approximately 50 m alongshore, as developed for USGS shoreline-change assessments. Reconstructed time series were compared to observations to validate the numerical model and the downscaled wave database method and showed overall good agreements.

Alaska↗
USGS2011

National Assessment of Shoreline Change; historical shoreline change along the New England and Mid-Atlantic coasts

Beach erosion is a chronic problem along many open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information regarding past and present trends and rates of shoreline movement. There is also a need for a comprehensive analysis of shoreline movement that is consistent from one coastal region to another. To meet these national needs, the U.S. Geological Survey (USGS) is conducting an analysis of historical shoreline changes along open-ocean sandy shores of the conterminous United States and parts of Hawaii, Alaska, and the Great Lakes. One purpose of this work is to develop standard, repeatable methods for mapping and analyzing shoreline movement so that periodic, systematic, internally consistent updates regarding coastal erosion and land loss can be made nationally. In the case of this study, the shoreline is the interpreted boundary between the ocean water surface and the sandy beach. This report on the New England and Mid-Atlantic coasts is the fifth in a series of reports on historical shoreline change. Previous investigations include analyses and descriptive reports of the Gulf of Mexico, the Southeast Atlantic, and, for California, the sandy shoreline and the coastal cliffs. The rates of change presented in this report represent conditions up to the date of the most recent shoreline data and therefore are not intended for predicting future shoreline positions or rates of change. Because of the geomorphology of the New England and Mid-Atlantic (rocky coastlines, large embayments and beaches) as well as data gaps in some areas, this report presents beach erosion rates for 78 percent of the 1,360 kilometers of the New England and Mid-Atlantic coasts. The New England and Mid-Atlantic shores were subdivided into a total of 10 analysis regions for the purpose of reporting regional trends in shoreline change rates. The average rate of long-term shoreline change for the New England and Mid-Atlantic coasts was -0.5 meters per year with an uncertainty in the long-term trend of plus or minus 0.09 meters per year. The rate is based on shoreline change rates averaged from 21,184 individual transects, of which 68 percent were eroding. In both the long and short term, the average rates of shoreline change for New England and the Mid-Atlantic were erosional. Long-term erosion rates were generally lower in New England than in the Mid-Atlantic. This is a function of the dominant coastal geomorphology; New England has a greater percentage of shore types that tend to erode more slowly (rocky coasts, pocket beaches, and mainland beaches), whereas the Mid-Atlantic is dominated by more vulnerable barrier islands and dynamic spit/inlet environments. However, the percentage of coastline eroding was higher in New England than in the Mid-Atlantic, highlighting that although rates of shoreline erosion may not be extreme, coastal erosion is still widespread along this region of the U.S. coastline. The average rate of short-term shoreline change for the New England and Mid-Atlantic coasts was also erosional but the rate of erosion decreased in comparison to long-term rates. The net short-term rate as averaged along 17,045 transects was -0.3 meters per year. Uncertainties for these rates range from 0.06 to 0.1 meters per year depending on the data sources used in the rate calculations. Of transects used to measure short-term change, 60 percent were erosional, as compared to 65 percent of coast eroding in the long term. The slight decrease (5 percent) in the amount of coastline eroding may be related to an increase in the frequency and extent of nourishment programs and (or) the effects of hardened structures during the more recent time period. The most stable (lower rates of erosion) beaches were more commonly found in New England. Despite an overall lowering of the average rates of erosion from long-term to short-term, the amount

Open-File Report↗
USGS2013

National assessment of shoreline change: historical shoreline change along the Pacific Northwest coast

Beach erosion is a chronic problem along most open ocean shores of the United States. As coastal populations continue to increase and infrastructure is threatened by erosion, there is increased demand for accurate information regarding past and present trends and rates of shoreline movement. There is also a need for a comprehensive analysis of shoreline movement that is consistent from one coastal region to another. To meet these national needs, the U.S. Geological Survey (USGS) is conducting an analysis of historical shoreline changes along the open-ocean sandy shores of the conterminous United States and parts of Hawaii, Alaska, and the Great Lakes. One purpose of this work is to develop standard, repeatable methods for mapping and analyzing shoreline movement so that periodic, systematic, and internally consistent updates regarding coastal erosion and land loss can be made nationally. In the case of the analysis of shoreline change in the Pacific Northwest (PNW), the shoreline is the interpreted boundary between the ocean water surface and the sandy beach. This report on the PNW coasts of Oregon and Washington is the seventh in a series of regionally focused reports on historical shoreline change. Previous investigations include analyses and descriptive reports of the U.S. Gulf of Mexico (Morton and others, 2004), the southeastern Atlantic (Morton and Miller, 2005), the sandy shorelines (Hapke and others, 2006) and coastal cliffs (Hapke and Reid, 2007) of California, the New England and mid-Atlantic coasts (Hapke and others, 2011), and parts of the Hawaii coast (Fletcher and others, 2012). Like the earlier reports in this series, this report summarizes the methods of analysis, interprets the results of the analysis, provides explanations regarding long- and short-term trends and rates of shoreline change, and describes how different coastal communities are responding to coastal erosion. This report differs from the early USGS reports in the series in that those shoreline change analyses incorporated only four total shorelines to represent specific time periods. This assessment of the PNW incorporates all available shorelines that meet minimum quality standards for resolution and positional accuracy. Shoreline change evaluations are based on a comparison of historical shoreline positions digitized from maps or aerial photographic data sources with recent shorelines, at least one of which is derived from lidar surveys. The historical shorelines cover a variety of time periods ranging from the 1800s through the 1980s, whereas the lidar shoreline is from 2002. Long-term rates of change are calculated using all available shoreline data and short-term rates of change are calculated using the lidar shoreline and the historical shoreline that will produce an assessment for a 15- to 35-year period. The rates of change presented in this report represent conditions up to the date of only the most recent shoreline data and therefore are not intended for predicting future shoreline positions or rates of change. The PNW coast was subdivided into eight analysis regions for the purpose of graphically reporting regional trends in shoreline change rates. The average rate of long-term shoreline change for the entire PNW coast was 0.9 meter per year (m/yr) of progradation with an uncertainty of 0.07 m/yr. This rate is based on 8,823 individual transects, of which 36 percent was determined to be eroding. Long-term shoreline change was generally more progradational in Washington than in Oregon. This is primarily due to the influence of the Columbia River and human perturbations to the natural system, particularly the construction of jetties at both the mouth of the Columbia River and at Grays Harbor, Washington. The majority of the beaches in southwestern Washington have responded to these large-scale engineered structures by experiencing dramatic beach progradation during the past century. Although these beaches are still responding to the human effects, in several locations beaches that had been rapidly prograding are now either prograding at a slower rate or eroding. The average rate of short-term shoreline change in the PNW was also progradational at a rate of 0.9 m/yr with an uncertainty of 0.03 m/yr. This rate is based on 9,087 individual transects, of which 44 percent was determined to be eroding. Similar to the results of the long-term shoreline change analysis, the shorelines in Washington were typically more progradational than those in Oregon in the short term. However, many stretches of coast in Oregon are either less accretional, changed from accretional to erosional, or more erosional when comparing the long- and short-term rate calculations. In the long and short term, there are significantly different historical shoreline change trends for beaches deriving their modern sediments from the Columbia River in southwestern Washington and northwestern Oregon, and beaches elsewhere in the PNW. The majority of shorelines in Oregon and in Washington’s Olympic Peninsula are not influenced by the human effects to the Columbia River littoral cell and typically have not experienced the human-induced century-scale trends apparent in southwestern Washington and northwestern Oregon. An increase in erosion hazards in much of Oregon may be related to the effects of sea-level rise and increasing storm wave heights. Of importance, particularly in the short term, is the alongshore variability in land uplift rates due to tectonics, which results in an alongshore varying rate of relative sea level rise that appears to at least partially control the regional variability in short-term shoreline change rates. Other climate related processes, such as the occurrence of major El Niño events, also significantly affect the shoreline changes in the region. Major El Niño events elevate monthly mean sea levels by tens of centimeters throughout the winter and produce a shift in the storm tracks, resulting in alongshore redistributions in sand volumes on the beaches, leading to hotspot beach erosion and property losses north of headlands and tidal inlets to bays and estuaries. There are limited modern-day sources of sand to Oregon’s beaches, with much of the sand being relict in having arrived thousands of years ago at a time of lowered sea levels when headlands did not prevent the alongshore movement of the beach sediments, the result being that many beaches today are deficient in sand volumes and therefore do not provide sufficient buffer protection to backshore properties during winter storms.

Oregon;Washington↗
USGS2013

Tectonic setting of the pebble and other copper-gold-molybdenum porphyry deposits within the evolving middle cretaceous continental margin of Northwestern North America

The Pebble Cu-Au-Mo deposit in southwestern Alaska, containing the largest gold resource of any known porphyry in the world, developed in a tectonic setting significantly different from that of the present-day. It is one of a series of metalliferous middle Cretaceous porphyritic granodiorite, quartz monzonite, and diorite bodies, evolved from lower crust and metasomatized lithospheric mantle melts, which formed along much of the length of the North American craton suture with the Peninsular-Alexander-Wrangellia arc. The porphyry deposits were emplaced within the northernmost two of a series of ca. 130 to 80 Ma flysch basins that define the suture, as well as into arc rocks immediately seaward of the two basins. Deposits include the ca. 100 to 90 Ma Pebble, Neacola, and other porphyry prospects along the Kahiltna basin-Peninsula terrane boundary, and the ca. 115 to 105 Ma Baultoff, Carl Creek, Horsfeld, Orange Hill, Bond Creek, and Chisna porphyries along the Nutzotin basin-Wrangellia terrane boundary. The porphyry deposits probably formed along the craton margin more than 1,000 km to the south of their present latitude. Palinspastic reconstructions of plate kinematics from this period are particularly difficult because magmatism overlaps the 119 to 83 Ma Cretaceous Normal Superchron, a period when sea-floor magnetic data are lacking. Our favored scenario is that ore formation broadly overlaps the cessation of sedimentation and contraction and the transition to a transpressional continental margin regime, such that the remnant ocean basins were converted to strike-slip basins. The basins and outboard Peninsular-Alexander-Wrangellia composite superterrane, which are all located seaward of the deep crustal Denali-Farewell fault system, were subjected to northerly dextral transpression for as long as perhaps 50 m.y., beginning at ca. 95 ± 10 Ma. The onset of this transpression was marked by development of the mineralized bodies along fault segments on the seaward side of the basins. Geochemical and radiogenic isotopic data for igneous rocks associated with the Pebble porphyry deposit suggest continuous melt derivation from enriched lithosphere of a recently metasomatized mantle. These geochemical characteristics, coupled with the arc-continent-related collisional setting, suggest that lithospheric thickening and postcollisional lithospheric melting are the most likely cause of the ore-related magmatism. Subsequent to translation of the Alaskan margin terranes and early Tertiary oroclinal bending of Alaska, the northernmost Kahiltna basin and the Pebble deposit, as well as the other porphyry systems, reached their present-day locations along southern Alaska.

Alaska, Yukon↗
USGS1965

Ordovician, Silurian, and Devonian biostratigraphy of east-central Alaska

A predominantly shale and chert sequence has been mapped from the Canadian border at Latitude 65°00′ N. to the Nation River about 25 miles northwest. It has Ordovician and Silurian graptolites in the lower half, and Middle Devonian corals and Upper Devonian spores in the upper half. The lower half of the sequence consists of about 400 to 900 feet of predominantly dark gray graptolitic shale with lesser amounts of grayish black laminated chert. This unit has been traced by Green and Roddick from the international border southeastward into the Dawson area of the Yukon Territory and northeastward into the Ogilvie and Richardson Mountains where it has been mapped by Jackson & Lenz, Norris, and others as the Road River Formation. In the Tatonduk-Nation Rivers area the Road River Formation rests disconformably on a sequence of Middle and Upper Cambrian limestone that locally may include Lower Ordovician (Tremadoc) beds at its top. The sequence of graptolite faunas from the Road River Formation in Alaska is essentially the same as the graptolite zones established by Elles and Wood in Great Britain. All the standard series of the Ordovician and Silurian are probably represented in the formation with the exception of the Tremadoc and possibly the Arenig and Wenlock. Overlying the Road River Formation is a formation, 200 to 800 feet thick, consisting predominantly of thinly bedded and laminated light gray to black chert and siliceous shale that is here named the McCann Hill Chert. This new formation disconformably overlies the Road River Formation, and its lower boundary is at the base of a distinctive limestone and shale member. The basal limestone and shale member of the McCann Hill Chert contains a remarkably varied fauna including corals, brachiopods, trilobites, conodonts, ostracods, and fish of Eifelian (early Middle Devonian) age. Spores from the upper part of the formation resemble those from the overlying Nation River Formation and indicate a Late Devonian age. The McCann Hill Chert is conformably overlain by the Nation River Formation—a thick succession of inter-bedded graywacke, chert conglomerate, and silty shale of Late Devonian age. In the vicinity of Jones Ridge, only 7 miles north of exposures of the Road River Formation, Upper Cambrian limestone is overlain by a pure limestone section containing Ordovician, Middle Devonian, and perhaps Silurian shelly faunas contemporaneous with the Road River Formation and the thinner basal limestone and shale member of the McCann Hill Chert. The rapid change from graptolitic shale to limestone probably reflects changes in conditions of sedimentation, but could be a result of thrust faulting. The Tatonduk-Nation Rivers area seems to lie in a transitional zone between an early Paleozoic eugeosynclinal belt south of the Yukon River and a contemporaneous miogeosynclinal belt along the Porcupine River. One puzzling feature of the lower Paleozoic sequence in the Tatonduk-Nation Rivers area is its thinness in contrast to the much thicker volcanic and detrital sequence on the south and the considerably thicker carbonate sequence on the north.

Alaska↗
USGS1986

Map of Western Copper River Basin, Alaska, Showing Lake Sediments and Shorelines, Glacial Moraines, and Location of Stratigraphic Sections and Radiocarbon-Dated Samples

The purpose of this report is to make available basic data on radiocarbon dating of 61 organic samples from 40 locations in the western Copper River Basin and adjacent uplands and in the uppermost Matanuska River Valley. The former distribution of late Quaternary glacial lakes and of glaciers as mapped from field work and photo interpretation is provided as background for interpretation of the radiocarbon dates and are the basic data needed for construction of the late Quaternary chronology. The glacial boundaries, formed and expressed by moraines, ice-contact margins, marginal channels, deltas, and other features, are obscured by a drape of glaciolacustrine deposits in a series of glacial lakes. The highest lake, represented by bottom sediments as high as 914 m to 975 m above sea level, extends from Fog Lakes lowland on Susitna River upstream into the northwestern part of the Copper River Basin (the part now draining to Susitna River) where it apparently was held in by an ice border. It was apparently dammed by ice from the Mt. McKinley area, by Talkeetna G1acier, and may have had a temporary drainage threshold at the headwaters of Chunilna Creek. No shorelines have been noted within the map area, although Nichols and Yehle (1961) reported shorelines within the 914-975 m range in the Denali area to the north of that mapped. Recent work by geologic consultants for the Susitna Hydroelectric Project has confirmed the early inferences (Karlstrom, 1964) about the existence of a lake in the Susitna canyon, based originally on drilling by the Bureau of Reclamation about 35 years ago. According to dating of deposits at Tyone Bluff (map locations 0, P), Thorson and others (1981) concluded that a late Wisconsin advance of the glaciers between 11,535 and 21,730 years ago was followed by a brief interval of lacustrine sedimentation, and was preceded by a long period of lake deposition broken by a lowering of the lake between 32,000 and about 25,000 years ago. An alternate interpretation of the late Wisconsin till at Tyone Bluff is that it is a glaciolacustrine diamicton of the 914-975 m lake into which the ice advanced to the Hatchet Lake and to the Old Man moraines. The level of this regional lake in the Susitna drainage and on Heartland Ridge then dropped from over 914 m to about 777 m, to uncover the Tyone Spillway. An intermediate lake level in the Susitna-Tyone-Louise lake region was lowered rapidly by erosion of the spillway to 747 m. The drainage of the 747 m lake was concentrated in the spillway leading west from the West Fork Gulkana River. This spillway or a rock threshold downstream apparently was stable enough to permit formation of basin-wide, apparently undeformed, shoreline systems at 747 m, and, on recession, local shorelines at 717 m and 700 m and lower levels. The level of the 747 m lake that was confined to about 9000 km2 of the present Copper River Basin fluctuated for one or more reasons such as: the volume of ice added to or withdrawn from the system, because of changes in water budget (assuming no outflow), and/or because of temporary releases through the only outlets, perhaps Mentasta Pass, but importantly, the Copper River canyon. The 747 m lake persisted until glaciers had withdrawn to well within the Chugach Mountains, perhaps 10 to 20 km from the present glaciers.

Open-File Report↗
USGS2015

Geologic map of Alaska

Summary This map and associated digital databases are the result of compilation and interpretation of published and unpublished 1:250,000-scale and limited 1:500,000- to 1:63,360-scale maps. Covering the entire state of Alaska, it reflects more than a century of work by a host of geologists and almost two decades of compilation work. There are two versions of the map: a detailed digital version, and a simplified, “generalized” map for print. The map units described in the accompanying pamphlet reflect those of the detailed digital map. At the end of each unit description, the generalized map unit for that unit is listed. Compilation of this map began in September 1996, using available 1:250,000-scale data to compile and release a regional map of central Alaska (Wilson and others, 1998). An ongoing iterative process was used to describe and correlate individual geologic units to produce the units for this statewide map and its interim products—a series of regional geologic map compilations—which were released as the process continued (in the references cited in the pamphlet that are shown with an *). As additional geologic data were acquired, previously released data, correlations, and interpretations were updated as needed. Compilation of this map was complex, because the original source maps were made by different generations of geologists, mapping with very different ideas. Several of the older maps were completed before the concepts of accreted (suspect) terranes or even plate tectonics existed. On the other hand, some of the more recent maps were so governed by terrane analysis that conventional stratigraphic nomenclature was not used or is obscured. We adopted a traditional stratigraphic approach and avoided use of the sometimes controversial and commonly inconsistently defined or applied terrane terminology. Our decision to adopt a traditional approach is evident in a map that emphasizes the age and lithology of map units, rather than differences among fault-bounded packages of rocks. We did our best to resolve conflicting interpretations and map data from the regional compilations and from the individual source maps in areas where regional compilations had not been produced. We made every effort to preserve the original geologic map information, incorporating, where available, new data, but we were careful to not overinterpret the geologic data. Yet even our willingness to make interpretations and revisions did not enable us in some areas to resolve mapping conflicts or to reconcile different mapping styles. Therefore, there are several areas on the map where map units are separated by “quadrangle boundary faults.” More data and fieldwork may allow resolution of these conflicts. This Alaska compilation is unique in that it is integrated with a rich database of information provided in the spatial datasets and standalone attribute databases. Within the spatial files every line and polygon is attributed to its original source; the references to these sources are contained in related tables, as well as in stand-alone tables. Additional attributes include typical lithology, geologic setting, and age range for the map units. Also included are tables of radiometric ages.

Alaska↗
USGS2025

Chemostratigraphy of the Cretaceous Hue Shale in Arctic Alaska: Exploring paleoceanographic controls on trace element enrichment, organic matter accumulation, and source-rock evolution

We document chemostratigraphy in an outcrop of late Albian to early Campanian (∼103–82 Ma) marine source rocks to better understand paleoenvironmental controls on trace element (TE) enrichment and organic matter accumulation in the distal Colville foreland basin of Arctic Alaska and how those drivers are linked to arc volcanism and successions of Cretaceous oceanographic and climatic biogeochemical events. This unique, 113-m-thick section of Cretaceous Hue Shale deposited during a series of previously undocumented Arctic Cretaceous oceanic anoxic events (Lease et al., 2024) is the only known exposure of thermally immature (0.48–0.52% R o , random vitrinite reflectance) Hue Shale in Arctic Alaska. Strata comprise mainly clay-rich mudstone with elevated total organic carbon (TOC) and hydrogen index values reaching 26.3 wt% (mean = 7.5 wt%) and 689 mg hydrocarbon (HC)/g TOC (mean = 385 mg HC/g TOC), respectively. Maceral composition consists predominantly of fluorescent amorphous organic matter, with abundant brightly fluorescent alginite, including Tasmanites , acritarchs, and Leiosphaeridia . Discrete layers of volcanic ash (preserved as bentonite) are present throughout the section and provide quantitative age control based on U–Pb dates. Chemostratigraphic trends are investigated to advance our understanding of local oceanographic conditions and controls on stratigraphic and temporal heterogeneity of Brookian source rocks. Concurrent sedimentary enrichment in Mo, U, V, Pb, and Cu across the Albian–Cenomanian boundary of the exposed basal gamma-ray zone, may reflect anoxic to euxinic benthic redox conditions favoring organic matter accumulation and preservation. Fluctuating degrees of anoxia-euxinia are inferred throughout the overlying Hue Shale succession, reflected by varying patterns of TE enrichment and TE–TOC covariation. Elevated C org /P molar ratios (>250) across most of the section, with several values exceeding 690, signify that enhanced biological productivity is sustained throughout deposition. Enhanced productivity, recorded by both C org /P and excess Ba, also parallels increases in source rock richness (elevated TOC and S 2 values) during the late Albian–early Cenomanian and late Cenomanian – Turonian. Enhanced productivity and variations in oceanic circulation/stratification likely both drove changes in benthic redox conditions that favored organic carbon accumulation and preservation. Increased continental arc volcanism (e.g., Okhotsk–Chukotka volcanic belt) and High Arctic Large Igneous Province magmatic eruptions throughout the Cretaceous, inferred to have influenced nutrient cycling and local aqueous nutrient availability, also have been invoked as potential drivers of organic carbon burial and source-rock development across the sedimentary sequence. Results presented here document the organic-rich and oil-prone source-rock quality of the Hue Shale in the distal part of the Colville foreland basin and bolster the potential for a Cretaceous petroleum system beneath the eastern North Slope.

Alaska↗
USGS2014

National Assessment of Oil and Gas Project: geologic assessment of undiscovered gas hydrate resources on the North Slope, Alaska

Scientists with the U.S. Geological Survey have completed the first assessment of the undiscovered, technically recoverable gas hydrate resources beneath the North Slope of Alaska. This assessment indicates the existence of technically recoverable gas hydrate resources—that is, resources that can be discovered, developed, and produced using current technology. The approach used in this assessment followed standard geology-based USGS methodologies developed to assess conventional oil and gas resources. In order to use the USGS conventional assessment approach on gas hydrate resources, three-dimensional industry-acquired seismic data were analyzed. The analyses indicated that the gas hydrates on the North Slope occupy limited, discrete volumes of rock bounded by faults and downdip water contacts. This assessment approach also assumes that the resource can be produced by existing conventional technology, on the basis of limited field testing and numerical production models of gas hydrate-bearing reservoirs. The area assessed in northern Alaska extends from the National Petroleum Reserve in Alaska on the west through the Arctic National Wildlife Refuge on the east and from the Brooks Range northward to the State-Federal offshore boundary (located 3 miles north of the coastline). This area consists mostly of Federal, State, and Native lands covering 55,894 square miles. Using the standard geology-based assessment methodology, the USGS estimated that the total undiscovered technically recoverable natural-gas resources in gas hydrates in northern Alaska range between 25.2 and 157.8 trillion cubic feet, representing 95 percent and 5 percent probabilities of greater than these amounts, respectively, with a mean estimate of 85.4 trillion cubic feet.

Alaska↗
USGS2010

Combined effects of tectonic and landslide-generated Tsunami Runup at Seward, Alaska during the Mw 9.2 1964 earthquake

We apply a recently developed and validated numerical model of tsunami propagation and runup to study the inundation of Resurrection Bay and the town of Seward by the 1964 Alaska tsunami. Seward was hit by both tectonic and landslide-generated tsunami waves during the M W "> M W MW 9.2 1964 megathrust earthquake. The earthquake triggered a series of submarine mass failures around the fjord, which resulted in landsliding of part of the coastline into the water, along with the loss of the port facilities. These submarine mass failures generated local waves in the bay within 5 min of the beginning of strong ground motion. Recent studies estimate the total volume of underwater slide material that moved in Resurrection Bay to be about 211 million m 3 (Haeussler et al. in Submarine mass movements and their consequences, pp 269–278, 2007 ). The first tectonic tsunami wave arrived in Resurrection Bay about 30 min after the main shock and was about the same height as the local landslide-generated waves. Our previous numerical study, which focused only on the local landslide-generated waves in Resurrection Bay, demonstrated that they were produced by a number of different slope failures, and estimated relative contributions of different submarine slide complexes into tsunami amplitudes (Suleimani et al. in Pure Appl Geophys 166:131–152, 2009 ). This work extends the previous study by calculating tsunami inundation in Resurrection Bay caused by the combined impact of landslide-generated waves and the tectonic tsunami, and comparing the composite inundation area with observations. To simulate landslide tsunami runup in Seward, we use a viscous slide model of Jiang and LeBlond (J Phys Oceanogr 24(3):559–572, 1994 ) coupled with nonlinear shallow water equations. The input data set includes a high resolution multibeam bathymetry and LIDAR topography grid of Resurrection Bay, and an initial thickness of slide material based on pre- and post-earthquake bathymetry difference maps. For simulation of tectonic tsunami runup, we derive the 1964 coseismic deformations from detailed slip distribution in the rupture area, and use them as an initial condition for propagation of the tectonic tsunami. The numerical model employs nonlinear shallow water equations formulated for depth-averaged water fluxes, and calculates a temporal position of the shoreline using a free-surface moving boundary algorithm. We find that the calculated tsunami runup in Seward caused first by local submarine landslide-generated waves, and later by a tectonic tsunami, is in good agreement with observations of the inundation zone. The analysis of inundation caused by two different tsunami sources improves our understanding of their relative contributions, and supports tsunami risk mitigation in south-central Alaska. The record of the 1964 earthquake, tsunami, and submarine landslides, combined with the high-resolution topography and bathymetry of Resurrection Bay make it an ideal location for studying tectonic tsunamis in coastal regions susceptible to underwater landslides.

Alaska↗
USGS2004

Two stages of deformation and fluid migration in the west-central Brooks Range fold and thrust belt, Northern Alaska

The Brooks Range is a north-directed fold and thrust belt that forms the southern boundary of the North Slope petroleum province in northern Alaska. Field-based studies have long recognized that large-magnitude, thin-skinned folding and thrusting in the Brooks Range occurred during arc-continent collision in the Middle Jurassic to Early Cretaceous (Neocomian). Folds and thrusts, however, also deform middle and Upper Cretaceous strata of the Colville foreland basin and thus record a younger phase of deformation that apatite fission-track data have shown to occur primarily during the early Tertiary (~60 and ~45 Ma). A structural and kinematic model that reconciles these observations is critical to understanding the petroleum system of the Brooks Range fold and thrust belt. New interpretations of outcrop and regional seismic reflection data indicate that from the modern mountain front northward to near the deformation front under the coastal plain, the basal thrust detachment for the orogen is located in the Jurassic and Lower Cretaceous Kingak Shale in the upper part of the regionally extensive, gently south-dipping, north-derived Mississippian to Early Cretaceous Ellesmerian sequence. The frontal part of the orogen lies in middle Cretaceous foreland basin strata and consists of a thin-skinned fold belt at the deformation front and a fully developed passive-roof duplex to the south. Near the mountain front, the orogen is composed of a stacked series of allochthons and thrust duplexes and associated Neocomian syntectonic deposits that are unconformably overlain by proximal foreland basin strata. The foreland basin strata and underlying deformed rocks are truncated by a younger generation of folds and thrusts. Vitrinite reflectance and stable isotope compositions of veins provide evidence of two fluid events in these rocks, including an earlier higher temperature (~250-300°C) event that was buffered by limestone and a younger, lower temperature (~150°C) event that had distinctly lower δ 13 C values as a result of oxidation of organic matter and/or methane. Zircon fission-track data from the host rocks of the veins show that the higher temperature fluid event occurred at 160-120 Ma, whereas the lower temperature event probably occurred at about 60-45 Ma. It is proposed that the Brooks Range consists of two superposed contractional orogens that used many of the same mechanically incompetent stratigraphic units (e.g., Kayak Shale, Kingak Shale) as sites of thrust detachment. The older orogen formed in a north-directed arc-continent collisional zone that was active from 160 to 120 Ma. This deformation produced a thin-skinned deformational wedge that is characterized by far-traveled allochthons with relatively low structural relief, because it involved a thin (1-4-km [0.6-2.5-mi]-thick) stratigraphic section. Deeper parts of the deformational wedge are envisioned to have contained relatively high-temperature fluids that presumably migrated from or through limestone-rich source areas in the underlying autochthon or from deeper parts of the orogen. The younger orogen, which formed initially at about 60 Ma and reactivated at 45 Ma, produced a thrust belt and frontal triangle zone with low amounts of shortening and relatively high structural relief, because it involved a structural section 5-10 km (3-6 mi) thick. Fluids associated with this deformation were relatively of lower temperature and suggest that hydrocarbon migration occurred at this time. We conclude that hydrocarbon generation from Triassic and Jurassic source strata and migration into stratigraphic traps occurred primarily by sedimentary burial principally at 100-90 Ma, between the times of the two major episodes of deformation. Subsequent sedimentary burial caused deep stratigraphic traps to become overmature, cracking oil to gas, and initiated some new hydrocarbon generation progressively higher in the section. Structural disruption of the traps in the early Tertiary released sequestered hydrocarbons. The hydrocarbons remigrated into newly formed structural traps, which formed at higher structural levels or were lost to the surface. Because of the generally high maturation of the Colville basin at the time of the deformation and remigration, most of the hydrocarbons available to fill traps were gas.

Alaska↗
USGS2004

Structure of the Red Dog District, western Brooks Range, Alaska

The Red Dog district of the western Brooks Range of northern Alaska, which includes the sediment-hosted Zn-Pb-Ag ± Ba deposits at Red Dog, Su-Lik, and Anarraaq, contains one of the world's largest reserves of zinc. This paper presents a new model for the structural development of the area and shows that understanding the structure is crucial for future exploration efforts and new mineral discoveries in the district. In the Red Dog district, a telescoped Late Devonian through Jurassic continental passive margin is exposed in a series of subhorizontally stacked, internally imbricated, and regionally folded thrust sheets. These sheets were emplaced during the Middle Jurassic to Late Cretaceous Brookian orogeny and subsequently were uplifted by late tectonic activity in the Tertiary. The thrust sheet stack comprises seven tectonostratigraphically distinct allochthonous sheets, three of which have been subject to regional and detailed structural analysis. The lowermost of these is the Endicott Mountains allochthon, which is overlain by the structurally higher Picnic Creek and Kelly River allochthons. Each individual allochthon is itself internally imbricated into a series of tectonostratigraphically coherent and distinct thrust plates and subplates. This structural style gives rise to duplex development and imbrication at a range of scales, from a few meters to tens of kilometers. The variable mechanical properties of the lithologic units of the ancient passive margin resulted in changes in structural styles and scales of structures across allochthon boundaries. Structural mapping and analysis of the district indicate a dominant northwest to west-northwest direction of regional tectonic transport. Local north to north-northeast transport of thrust sheets is interpreted to reflect the influence of underlying lateral and/or oblique ramps, which may have been controlled by inherited basin margin structures. Some thrust-sheet stacking patterns suggest out-of-sequence thrusting. The west-northwest-east-southeast-trending Wrench Creek and Sivukat Mountain faults were previously interpreted to be strike-slip faults, but this study shows that they are Tertiary (Eocene?) late extensional faults with little or no lateral displacement.

Alaska↗
USGS2007

The National Assessment of Shoreline Change: A GIS compilation of vector cliff edges and associated cliff erosion data for the California coast

The U.S. Geological Survey has generated a comprehensive data clearinghouse of digital vector cliff edges and associated rates of cliff retreat along the open-ocean California coast. These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Cliff erosion is a chronic problem along many coastlines of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of coastal cliff retreat. There is also a critical need for these data to be consistent from one region to another. One objective of this work is to a develop standard, repeatable methodology for mapping and analyzing cliff edge retreat so that periodic, systematic, and internally consistent updates of cliff edge position and associated rates of erosion can be made at a national scale. This data compilation for open-ocean cliff edges for the California coast is a separate, yet related study to Hapke and others, 2006 documenting shoreline change along sandy shorelines of the California coast, which is itself one in a series that includes the Gulf of Mexico and the Southeast Atlantic coast (Morton and others, 2004; Morton and Miller, 2005). Future reports and data compilations will include coverage of the Northeast U.S., the Great Lakes, Hawaii and Alaska. Cliff edge change is determined by comparing the positions of one historical cliff edge digitized from maps with a modern cliff edge derived from topographic LIDAR (light detection and ranging) surveys. Historical cliff edges for the California coast represent the 1920s-1930s time-period; the most recent cliff edge was delineated using data collected between 1998 and 2002. End-point rate calculations were used to evaluate rates of erosion between the two cliff edges. Please refer to our full report on cliff edge erosion along the California coastline at http://pubs.usgs.gov/of/2007/1133/ for additional information regarding methods and results (Hapke and others, 2007). Data in this report are organized into downloadable layers by region (Northern, Central and Southern California) and are provided as vector datasets with accompanying metadata. Vector cliff edges may represent a compilation of data from one or more sources and the sources used are included in the dataset metadata. This project employs the Environmental Systems Research Institute's (ESRI) ArcGIS as it's Geographic Information System (GIS) mapping tool and contains several data layers (shapefiles) that are used to create a geographic view of the California coast. The vector data form a basemap comprising polygon and line themes that include a U.S. coastline (1:80,000), U.S. cities, and state boundaries.

California↗
USGS2006

The National Assessment of Shoreline Change: A GIS compilation of vector shorelines and associated shoreline change data for the sandy shorelines of the California coast

Introduction The Coastal and Marine Geology Program of the U.S. Geological Survey has generated a comprehensive data clearinghouse of digital vector shorelines and shoreline change rates for the sandy shoreline along the California open coast. These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Beach erosion is a chronic problem along many open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of shoreline migration. There is also a critical need for shoreline change data that is consistent from one coastal region to another. One purpose of this work is to develop standard, repeatable methods for mapping and analyzing shoreline movement so that periodic, systematic, and internally consistent updates of shorelines and shoreline change rates can be made at a National Scale. This data compilation for open-ocean, sandy shorelines of the California coast is one in a series that already includes the Gulf of Mexico and the Southeast Atlantic Coast (Morton et al., 2004; Morton et al., 2005) and will eventually cover Washington, Oregon, and parts of Hawaii and Alaska. Short- and long-term shoreline change evaluations are determined by comparing the positions of three historical shorelines digitized from maps, with a modern shoreline derived from LIDAR (light detection and ranging) topographic surveys. Historical shorelines generally represent the following time-periods: 1850s-1880s, 1920s-1930s, and late 1940s-1970s. The most recent shoreline is from data collected between 1997 and 2002. Long-term rates of change are calculated by linear regression using all four shorelines. Short-term rates of change are end-point rate calculations using the two most recent shorelines. Please refer to our full report on shoreline change of the California coastline at http://pubs.usgs.gov/of/2006/1219/ for additional information regarding methods and results (Hapke et al., 2006). Data in this report are organized into downloadable layers by region (Northern, Central and Southern California) and are provided as vector datasets with metadata. Vector shorelines may represent a compilation of data from one or more sources and these sources are included in the dataset metadata. This project employs the Environmental Systems Research Institute's (ESRI) ArcGIS as it's GIS mapping tool and contains several data layers (shapefiles) that are used to create a geographic view of the California Coast. These vector data form a basemap comprised of polygon and line themes that include a U.S. coastline (1:80,000), U.S. cities, and state boundaries.

California↗
USGS1984

Neogene molluscan stages of the West Coast of North America

Neogene marine sediments of the West Coast of North America were deposited in a series of widely spaced basins that extended geographically from the western and northern Gulf of Alaska (60°N) to southern California (33°N). Rich molluscan faunas occur extensively throughout these deposits and form the basis for biostratigraphic schemes that are useful for correlating within and between individual basins. Early biostratigraphic work was concerned with faunas from particular horizons and with the stratigraphic range of diverse taxa, such as Pecten and Turritella , without reference to other fossil groups. Succeeding work increasingly dealt with the relationships of molluscan zones to benthic and, later, planktonic foraminiferal stages. In recent years the age limits of Neogene molluscan stages have become better documented by reference to planktonic microfossils from dated DSDP cores and onshore faunas. Neogene molluscan faunas from California, the Pacific Northwest states (Oregon and Washington), and southern Alaska have been treated separately due to differences in faunal composition and geographic isolation. As a result, a different biostratigraphic sequence has been described for each region. Pacific Northwest stages have been formally named and defined, and their names are also used informally for Alaskan faunas. California Neogene stages were proposed early in this century, are in need of redescription, and their usage is informal. Precise correlations between the three regional sequences have not yet been achieved, due to the low number of co-occurring species and the general lack of planktonic microfossils in these largely shallow-water faunas. The objectives of ongoing research include: fuller documentation of the faunas of California and Pacific Northwest stages; formal description of California stages; improved correlation between regional stage sequences; refinement of age estimates for stage boundaries; and, establishment of Neogene stages for Alaskan faunas.

California, Oregon, Washington↗
USGS2004

The National Assessment of Shoreline Change: A GIS Compilation of Vector Shorelines and Associated Shoreline Change Data for the U.S. Gulf of Mexico

Introduction The Coastal and Marine Geology Program of the U.S. Geological Survey has generated a comprehensive database of digital vector shorelines and shoreline change rates for the U.S. Gulf of Mexico. These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Beach erosion is a chronic problem along most open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of shoreline migration. There is also a critical need for shoreline change data that is consistent from one coastal region to another. One purpose of this work is to develop standard repeatable methods for mapping and analyzing shoreline movement so that periodic updates regarding coastal erosion and land loss can be made nationally that are systematic and internally consistent. This data compilation for open-ocean, sandy shorelines of the Gulf of Mexico is the first in a series that will eventually include the Atlantic Coast, Pacific Coast, and parts of Hawaii and Alaska. Short- and long-term shoreline change evaluations are based on merging three historical shorelines with a modern shoreline derived from lidar (light detection and ranging) topographic surveys. Historical shorelines generally represent the following time periods: 1800s, 1920s-1930s, and 1970s. The most recent shoreline is derived from data collected over the period of 1998-2002. Long-term rates of change are calculated by linear regression using all four shorelines. Short-term rates of change are simple end-point rate calculations using the two most recent shorelines. Please refer to our full report on shoreline change in the Gulf of Mexico, National Assessment of Shoreline Change: Part 1, Historical Shoreline Changes and Associated Coastal Land Loss Along the U.S. Gulf of Mexico (USGS Open File Report 2004-1043) for additional information regarding methods and results. Data in this report are organized into data layers by state and are provided as single-point vector datasets with metadata. Vector shorelines may represent a compilation of data from one or more sources and these sources are attributed in the dataset. All data are intended to be GIS-ready inasmuch as the data should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System (GIS). This project employs the Environmental Systems Research Institute's (ESRI) ArcView as its GIS mapping tool and contains several data layers (or themes) that are used to create a geographic view of the margin off the U.S. Gulf of Mexico. These vector data form a basemap comprised of polygon and line themes that include a U.S. coastline (1:80,000), U.S. cities, and state boundaries.

Open-File Report↗
USGS2001

Geologic studies in Alaska by the U.S. Geological Survey, 1999

The collection of nine papers that follow continue the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. The series presents new and sometimes preliminary findings that are of interest to earth scientists in academia, government, and industry; to land and resource managers; and to the general public. Reports presented in Geologic Studies in Alaska cover a broad spectrum of topics from various parts of the State (fig. 1), serving to emphasize the diversity of USGS efforts to meet the Nation's needs for earth-science information in Alaska. The papers in this volume are organized under the topics: Hazards, Geologic Framework, Environment and Climate, and Resources. This organization is intended to reflect the scope and objectives of USGS geologic programs currently active in Alaska. The two Hazards studies discuss volcano-related topics in the seismically active southcentral Alaska region. The first paper revisits the eruptive events of Redoubt Volcano that occurred more than a decade ago and the subsequent development of the Alaska Volcano Observatory (AVO). This treatise documents the historic impact of this eruption and briefly summarizes the state of our knowledge of the other Cook Inlet, Alaska Peninsula, and Aleutian Island volcanoes. Finally, it discusses the recent role that AVO has had in seismic station installation and hazard assessment at volcanically active sites throughout the world. The second paper discusses the eruptive history of Snowy Mountain in the upper Alaska Peninsula. Because subsets of its 25-30 lava flows erupted as packages in short episodes, calculation of the volcano's lifetime average volumetric eruption rate is problematic. A portion of the cone was hydrothermally weakened and collapsed in the late Holocene producing a 22-km2 debris avalanche. Geologic Framework studies provide background information that is the scientific basis for present and future earth science investigations. The first paper compares and contrasts the Insular-Intermontane suture zone (IISZ) of southeast Alaska with the Adria-Europe suture zone (AESZ) of Switzerland and Hungary. The study develops the hypothesis that the zones have distinct differences as well as similarities and neither is a simple lithotectonic terrane boundary. The second paper discusses the relation among volcanic, glacial, and tectonic activity in the Cold Bay and False Pass 1 :250,000-scale quadrangles on the Alaska Peninsula. During Pleistocene time, continental-shelf glaciations and two massive volcanic centers were the dominant controls over landscape development. The third paper gives detailed geologic information for Paleozoic rocks within the Taylor Mountains D-1 quadrangle portion of the Holitna Lowland of southwestern Alaska. Because of the excellent preservation of megafossils, these Silurian and Ordovician strata lend themselves to detailed statigraphic investigations. Further, low thermal alteration indices of this area have made them a potential target of petroleum exploration. The final report in this section discusses the development of a new spectral enhancement approach for interpreting Multispectral Scanner (MSS) and Thematic Mapper (TM) satellite images. This technique enhances the use of remote sensing data in identifying geologic units in areas that have been poorly investigated. This study used this technique to better define the distribution of a JMtu (mafic, ultramafic, and sedimentary) unit and a PzZrqs (pelitic and quartzitic schist) unit. Environment and climate studies are the emphasis of two papers. One presents the first radiocarbon-dated postglacial vegetation history of the Kenai Mountains of southcentral Alaska. This reconstruction is the result of the analysis of pollen assemblages and peat from sediments collected in Tern Lake and presents a minimum age for deglaciation of these interior valleys at 9,31 0±200 yr B .P. Current vegetation, however, developed within the past ca. 2,500 years. A second study discusses the cycling of arsenic and cadmium in sub-arctic boreal forest ecosystems typical of interior Alaska and defines the importance of various natural (geogenic) sources. The transport and uptake into vegetation of these elements from soils developed from loess as well as soils developed from the major rock units is presented. The bioaccumulation of cadmium in willow (Salix sp.) and its potential consequence to the health of browsing animals is discussed. Papers related to resource issues comprise the topic of the final report. This paper presents a brief statistical summary of the geochemistry of rock samples collected in the east-central portion of the Eagle 1 :250,000-scale quadrangle. This study helps define the rock unit source of both resource- and environmental-based chemical elements of interest in the Fortymile mining district. Two bibliographies at the end of the volume list reports covering Alaska earth science topics in USGS publications during 1999 and reports about Alaska by USGS authors in non-USGS publications during the same period.

Alaska↗
USGS1967

Surface faults on Montague Island associated with the 1964 Alaska earthquake

Two reverse faults on southwestern Montague Island in Prince William Sound were reactivated during the earthquake of March 27, 1964. New fault scarps, fissures, cracks, and flexures appeared in bedrock and unconsolidated surficial deposits along or near the fault traces. Average strike of the faults is between N. 37° E. and N. 47° E.; they dip northwest at angles ranging from 50° to 85°. The dominant motion was dip slip; the blocks northwest of the reactivated faults were relatively upthrown, and both blocks were upthrown relative to sea level. No other earthquake faults have been found on land. The Patton Bay fault on land is a complex system of en echelon strands marked by a series of spectacular landslides along the scarp and (or) by a zone of fissures and flexures on the upthrown block that locally is as much as 3,000 feet wide. The fault can be traced on land for 22 miles, and it has been mapped on the sea floor to the southwest of Montague Island an additional 17 miles. The maximum measured vertical component of slip is 20 to 23 feet and the maximum indicated dip slip is about 26 feet. A left-lateral strike-slip component of less than 2 feet occurs near the southern end of the fault on land where its strike changes from northeast to north. Indirect evidence from the seismic sea waves and aftershocks associated with the earthquake, and from the distribution of submarine scarps, suggests that the faulting on and near Montague Island occurred at the northeastern end of a reactivated submarine fault system that may extend discontinuously for more than 300 miles from Montague Island to the area offshore of the southeast coast of Kodiak Island. The Hanning Bay fault is a minor rupture only 4 miles long that is marked by an exceptionally well defined almost continuous scarp. The maximum measured vertical component of slip is 16⅓ feet near the midpoint, and the indicated dip slip is about 20 feet. There is a maximum left-lateral strike-slip component of one-half foot near the southern end of the scarp. Warping and extension cracking occurred in bedrock near the midpoint on the upthrown block within about 1,000 feet of the fault scarp. The reverse faults on Montague Island and their postulated submarine extensions lie within a tectonically important narrow zone of crustal attenuation and maximum uplift associated with the earthquake. However, there are no significant lithologic differences in the rock sequences across these faults to suggest that they form major tectonic boundaries. Their spatial distribution relative to the regional uplift associated with the earthquake, the earthquake focal region, and the epicenter of the main shock suggest that they are probably subsidiary features rather than the causative faults along which the earthquake originated. Approximately 70 percent of the new breakage along the Patton Bay and the Hanning Bay faults on Montague Island was along obvious preexisting active fault traces. The estimated ages of undisturbed trees on and near the fault trace indicate that no major disc placement had occurred on these faults for at least 150 to 300 years before the 1964 earthquake.

Alaska↗