USGS Science⌕ Search

SEARCH · USGS Science

Results for “Working Group Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources

Water resources of the Palau Islands

The Palau Islands are a group of 350 islands, ranging in size from a few hundred square feet to the 153-square-mile island of Babelthuap. Babelthuap is the second largest island in the Western Pacific and comprises more than 80 percent of the total land area of the Palau Islands. Most of the islands are uninhabited limestone ridges covered with dense vegetation. These islands have no freshwater resources and are not included in this report. The island of Koror with an area of 3.6 square miles is the administrative, commercial, and population center of Palau and has an annual average rainfall of 148 inches. Short-term rainfall records at other locations in the islands indicate little variation in annual rainfall throughout the Palau Islands. Runoff-to-rainfall ratios for streams on Babelthuap show that about 70 percent of the rain falling on the island runs off to the ocean. The uniformity of rainfall and basin characteristics is shown by the excellent correlation between mean annual rainfall on Koror and streamflow on Babelthuap and by the close correlations between discharge at gaging stations and partial-record sites. Surface water quality is generally very good as shown by 55 chemical analyses of water from 18 sources. The dissolved solids concentration of water samples did not exceed 66 milligrams per liter. This report summarizes in one volume hydrologic data collection in a 14-year period of study and provides interpretations of the data than can be used by planners and public works officials as a basis for making decisions on the development and management of the islands' water resources.

Water-Resources Investigations Report↗

Duttonite, a new quadrivalent vanadium oxide from the Peanut mine, Montrose County, Colorado

Duttonite, a new quadrivalent vanadium oxide from the Peanut mine, Montrose County, Colo., has the formula VO(OH) 2 . The mineral occurs as crusts and coatings of pale-brown transparent platy crystals, as one of the first oxidation products of montroseite ore. It is associated with melanovanadite and abundant crystals of hexagonal native selenium. Duttonite is biaxial positive, 2V is about 60°, dispersion is r < v , moderate; X = a , pale pinkish brown; Y = c , pale yellow-brown; Z = b , pale brown; α = 1.810 ± 0.003, β = 1.900 ± 0.003, γ > 2.01. The hardness is about 2.5; the calculated specific gravity is 3.24. The chemical analysis shows, in percent: V 2 o 3 2.6, V 2 O 4 75.3, FeO 0.4, H 2 O 18.1, insoluble 4.2, total 100.6. Duttonite is monoclinic, a o = 8.80 ± 0.02A, b o - 3.95 ± 0.01A, c o - 5.96 ± 0.02A, β = 90°40 1 ± 5 1 . The space group is I 2/ c , ( C 6 2 h ); the cell contents are 4[VO(OH) 2 ]. The crystals are strongly pseudo-orthorhombic, and the structure departs only slightly from the space group Imcm . Duttonite is named for Captain Clarence Edward Dutton (1841-1912). A detailed study of the geology, geochemistry, and mineralogy of the vanadium-uranium ore at the Peanut mine, Montrose County, Colo., was begun early in 1954 by Carl H. Roach of the U. S. Geological Survey. A number of rare and new minerals were found in the ore and the study of these samples was undertaken by Mary E. Thompson. Duttonite is the first new vanadium mineral to be described from the Peanut mine. It is named for Captain Clarence Edward Dutton (1841-1912), who was one of the first geologists to work in the Colorado Plateau region and who was a member of the U. s. Geological Survey from 1879-91. We are indebted to the following members of the Geological Surbey: K. E. Valentine for spectrographic analyses of duttonite, and M. E. Mrose and H. T. Evans, Jr., for measurement of the unit cell constants. This work is part of a program being conducted by the U. S. Geological Survey on behalf of the Division of Raw Materials of the U. S. Atomic Energy Commission.

Colorado↗

Benthic macroinvertebrate assemblages and their relations with environmental variables in the Sacramento and San Joaquin River drainages, California, 1993-1997

Data were collected in the San Joaquin and Sacramento river drainages to evaluate associations between macroinvertebrate assemblages and environmental variables as part of the National Water-Quality Assessment Program of the U.S. Geological Survey. Samples were collected at 53 sites from 1993 to 1995 in the San Joaquin River drainage and in 1996 and 1997 in the Sacramento River drainage. Macroinvertebrates were collected from riffles or from large woody debris (snags) when riffles were absent. Macroinvertebrate taxa were aggregated to the family (or higher) level of taxonomic organization, resulting in 81 taxa for analyses. Only the 50 most common taxa were used for two-way indicator species analysis (TWINSPAN) and canonical correspondence analysis. TWINSPAN analysis defined four groups of riffle samples and four groups of snag samples based on macroinvertebrate assemblages. Analysis of variance identified differences in environmental and biotic characteristics of the groups. These results combined with the results of canonical correspondence analysis indicated that patterns in riffle sample assemblage structure were highly correlated with a gradient in physical and chemical conditions associated with elevation. The results also suggested that flow regulation associated with large storage reservoirs has negative effects on the total number of taxa and density of macroinvertebrates below foothill dams. Analysis of the snag samples showed that, although elevation remained a significant variable, mean dominant substrate size, gradient, specific conductance, water temperature, percentage of the basin in agricultural land use, and percentage of the basin in combined agricultural and urban land uses were more important factors in explaining assemblage structure. Macroinvertebrate assemblages on snags may be useful in family level bioassessments of environmental conditions in valley floor habitats. In the Sierra Nevada and its foothills, the strong influence of elevation made it difficult to attribute differences in macroinvertebrate assemblage structure among sites to specific environmental conditions. Additional work is needed in the foothills and Sierra Nevada to better define macroinvertebrate assemblages and their relations to environmental variables.

Water-Resources Investigations Report↗

Mapping of Florida's coastal and marine resources: Setting priorities workshop

The importance of mapping habitats and bioregions as a means to improve resource management has become increasingly clear. Large areas of the waters surrounding Florida are unmapped or incompletely mapped, possibly hindering proper management and good decisionmaking. Mapping of these ecosystems is among the top priorities identified by the Florida Oceans and Coastal Council in their Annual Science Research Plan. However, lack of prioritization among the coastal and marine areas and lack of coordination of agency efforts impede efficient, cost–effective mapping. A workshop on Mapping of Florida’s Coastal and Marine Resources was sponsored by the U.S. Geological Survey (USGS), Florida Department of Environmental Protection (FDEP), and Southeastern Regional Partnership for Planning and Sustainability (SERPPAS). The workshop was held at the USGS Florida Integrated Science Center (FISC) in St. Petersburg, FL, on February 7-8, 2007. The workshop was designed to provide State, Federal, university, and non-governmental organizations (NGOs) the opportunity to discuss their existing data coverage and create a prioritization of areas for new mapping data in Florida. Specific goals of the workshop were multifold, including to: provide information to agencies on state-of-the-art technology for collecting data; inform participants of the ongoing mapping programs in waters off Florida; present the mapping needs and priorities of the State and Federal agencies and entities operating in Florida; work with State of Florida agencies to establish an overall priority for areas needing mapping; initiate discussion of a unified classification of habitat and bioregions; discuss and examine the need to standardize terminology and data collection/storage so that data, in particular habitat data, can be shared; identify opportunities for partnering and leveraging mapping efforts among agencies and entities; identify impediments and organizational gaps that hinder collection of data for mapping; seek innovative solutions to the primary obstacles identified; identify the steps needed to move mapping of Florida’s oceans and coasts forward, in preparation for a better coordinated, more cost-effective mapping program to allow State and Federal agencies to make better decisions on coastal-resource issues. Over 90 invited participants representing more than 30 State and Federal agencies, universities, NGOs, and private industries played a large role in the success of this two-day workshop. State of Florida agency participants created a ranked priority order for mapping 13 different regions around Florida. The data needed for each of the 13 priority regions were outlined. A matrix considering State and Federal priorities was created, utilizing input from all agencies. The matrix showed overlapping interests of the entities and will allow for partnering and leveraging of resources. The five most basic mapping needs were determined to be bathymetry, high-vertical resolution coastline for sea-level rise scenarios, shoreline change, subsurface geology, and benthic habitats at sufficient scale. There was a clear convergence on the need to coordinate mapping activities around the state. Suggestions for coordination included: creating a glossary of terms: a standard for specifying agency data-mapping needs; creating a geographic information officer (GIO) position or permanent organizing group to maintain communications established at this workshop and to maintain progress on the issues identified during the workshop. The person or group could develop a website, maintain a project-status matrix, develop a list of contacts, create links to legislative updates and links to funding sources; developing a web portal and one-stop/clearinghouse of data. There was general consensus on the need to adopt a single habitat classification system and a strategy to accommodate existing systems smoothly. Unresolved aspects of the systems warrant that a separate workshop would be needed to work out details. Participants recognized that the State priority list would necessarily be updated periodically. An annual review of priorities would facilitate information exchange, mapping activities updates, and re-allocation of funding among changing priorities. It was recognized that mapping of State waters would take billions of dollars and in light of tightening budgets there was need for processes that could be used to appropriate or leverage monies for mapping and reduce data-collection costs. Fourteen different avenues were explored. There was a clear consensus that the linking of public to private partnerships to support mapping was imperative, and ways to achieve this were discussed.

Florida↗

Decision support system development at the Upper Midwest Environmental Sciences Center

A Decision Support System (DSS) can be defined in many ways. The working definition used by the U.S. Geological Survey Upper Midwest Environmental Sciences Center (UMESC) is, “A spatially based computer application or data that assists a researcher or manager in making decisions.” This is quite a broad definition—and it needs to be, because the possibilities for types of DSSs are limited only by the user group and the developer’s imagination. There is no one DSS; the types of DSSs are as diverse as the problems they help solve. This diversity requires that DSSs be built in a variety of ways, using the most appropriate methods and tools for the individual application. The skills of potential DSS users vary widely as well, further necessitating multiple approaches to DSS development. Some small, highly trained user groups may want a powerful modeling tool with extensive functionality at the expense of ease of use. Other user groups less familiar with geographic information system (GIS) and spatial data may want an easy-to-use application for a nontechnical audience. UMESC has been developing DSSs for almost 20 years. Our DSS developers offer our partners a wide variety of technical skills and development options, ranging from the most simple Web page or small application to complex modeling application development.

Upper Midwest↗

A more representative community of ecologists

Ecologists play a crucial role in providing solutions to the challenges facing the world. For most of the history of the field, however, the science of ecology has been pursued by white men, and increasingly, by white women. This lack of diversity is untenable today, not only because it is socially unjust, but also because solving environmental problems requires diversity. Ecology as a science is an extremely rewarding and fun career choice for many, but how can the field recruit a more diverse workforce to do this important and gratifying work? Attracting and retaining future ecologists of color is the focus of this Forum. How do young people choose a career in ecology and environmental sciences? For many ecologists, environmental scientists and managers, and future natural resource professionals, an early field experience provides a crucial introduction and gateway. A sojourn at a field station, an extended field trip, or field expedition has introduced many of today’s professionals to their fields, but at the same time, a growing literature documents problematic behavior, discrimination, and other forms of harassment that have been far too frequently reported, and little attention has been given to conscious or implicit exclusion of students from diverse backgrounds. In their lead article, Bowser and Cid, two leading researchers and long-time champions of diversity in ecology, build on experience in long-running programs as well as the literature to diagnose challenges facing diverse youth, and present approaches to encourage, rather than discourage, further engagement. They describe affirmative and creative measures that foster a sense of inclusion and community among young scholars; this sense of belonging and empowerment allows many to advance to studies and careers in ecology and environmental science. In the subsequent six papers, authors explore topics either responding to, or inspired by, the lead paper. They explore alternatives to a field experience as a gateway to a career in ecology or environmental sciences through, for example, data science or the social sciences. Other comment papers describe challenges faced in the next phases of an academic career, barriers faced by specific cultural groups and the approaches, challenges, and outcomes of programs aiming to increase the diversity of the environmental STEM workforce. All responses sound a clarion call for change to hear and value different voices and perspectives to be heard and valued. These include (1) structural and cultural change to our institutions and reward structures; (2) developing and nurturing personal relationships among students and their mentors, within teams and in internships; (3) making entry to ecology inviting and making advancement in ecology free from systemic barriers; and (4) broadening our vision of ecology, and the ways we learn about the world’s ecosystems. The Ecological Society of America, the home for Ecological Applications , is committed to the diversity, equity and inclusion needed to tackle environmental challenges in unity (https://www.esa.org/esablog/2020/09/24/time-for-action-esa-initiates-a-diversity-equity-inclusion-and-justice-deij-task-force/). The world needs all available talent and perspectives to meet environmental challenges today. Ecological Applications has long published occasional papers on the profession of ecology and never ones more important or timely than these. The editorial team is proud to provide an outlet for the voices of our field, in all its current, if inadequate, diversity and honored to host the passionate and committed views of our authors.

Ecological Applications↗

Network global navigation satellite system surveys to harmonize American and Canadian datum for the Lake Champlain Basin

Historically high flood levels were observed during flooding in Lake Champlain and the Richelieu River from late April through May 2011. Flooding was caused by record spring precipitation and snowmelt from the third highest cumulative snowfall year on record, which included a warm, saturated late spring snowpack. Flood stage was exceeded for a total of 67 days from April 13 to June 19, 2011. During this flooding, shoreline erosion and lake flood inundation were exacerbated by wind-driven waves associated with local fetch and lake-wide seiche effects. In May 2011, a new water-surface-elevation record was set for Lake Champlain. Peak lake-level water-surface elevations varied at the three U.S. Geological Survey lake-level gages on Lake Champlain in 2011. The May 2011 peak water-surface elevations for Lake Champlain ranged from 103.20 feet above the National Geodetic Vertical Datum of 1929 at the northern end of Lake Champlain (at its outlet into the Richelieu River at Rouses Point, New York) to 103.57 feet above the National Geodetic Vertical Datum of 1929 at the southern end of the Lake in Whitehall, New York. The water-surface elevations for the Richelieu River in Canada are referenced to a different vertical datum than are those in Lake Champlain in the United States, which causes difficulty in assessing real-time flood water-surface elevations and comparing of flood peaks in the Lake Champlain Basin in the United States and Canada. On March 19, 2012, as a result of the flood event of April and May 2011, the Governments of Canada and the United States asked the International Joint Commission to draft a plan of study to examine the causes and the effects of the spring 2011 flooding on Lake Champlain and the Richelieu River and develop potential mitigation measures. Specific challenges noted by the International Lake Champlain-Richelieu River Technical Working Group (established by the International Joint Commission) included harmonization of vertical datums within the drainage basin. Harmonization of the vertical datum discrepancy is needed for flood assessment and future efforts to model the flow of water through the Lake Champlain Basin in the United States and Canada. In April 2015, the U.S. Geological Survey and Environment Canada began a joint field effort with the goal of obtaining precise elevations representing a common vertical datum for select reference marks used to determine water-surface elevations throughout Lake Champlain and the Richelieu River. To harmonize the datum difference between the United States and Canada, Global Navigation Satellite System surveys were completed at nine locations in the Lake Champlain Basin to collect simultaneous satellite data. These satellite data were processed to produce elevations for two reference marks associated with dams and seven reference marks associated with active water-level gages (lake gages in Lake Champlain and streamgages in the Richelieu River) to harmonize vertical datums throughout the Lake Champlain Basin. The Global Navigation Satellite System surveys were completed from April 14 to 16, 2015, at locations ranging from southern Lake Champlain near Whitehall, New York, to the northern end of the Richelieu River in Sorel, Quebec, at its confluence with the St. Lawrence River in Canada. Lake-gage water-surface elevations determined during the 3 days of surveys were converted to water-surface elevations referenced to the North American Vertical Datum of 1988 by using calculated offsets and historical water-surface elevations. In this report, an &ldquo;offset&rdquo; refers to the adjustment that needs to be applied to published data from a particular gage to produce elevation data referenced to the North American Vertical Datum of 1988. Offsets presented in this report can be used in the evaluation of water-surface elevations in a common datum for Lake Champlain and the Richelieu River. In addition, the water-level data referenced to the common datum (as determined from the offsets) may be used to calibrate flow models and support future modeling studies developed for Lake Champlain and the Richelieu River.

New York, Quebec, Vermont↗

U.S. Geological Survey Karst Interest Group: proceedings, St Petersburg, Florida February 13-16, 2001

Karst and similar landscapes are found in a wide range of biogeographic classes. In the U.S. for example, Everglades, Mammoth Cave, and Hawaii Volcanoes National Parks have little in common - except karst or pseudokarst, and a cultural past (even though these are very different). This diversity of geologic settings makes karst difficult to categorize and work with when designing a national program such as the recent NPS-USGS Geo-Indicators effort. A GIS-based approach with multiple datalayers is the only sane way to understand and convey the many relationships, in X, Y, and Z axes, between component ecosystems and cultural resources within karst and pseudokarst landscapes. Obviously, karst and cultural landscapes cross modern political as well as biogeographic boundaries. Here again, three-dimensional data are the foundation for understanding similar to that in anatomy and physiology: structure and function. In understanding where the most vulnerable 'pressure points' exist within karst landscapes, we can target landscape-scale ecosystem management to greatest effect. USGS and the National Cave and Karst research Institute could play an extremely significant role in cave and karst management on a national scale beyond NPS or other agency boundaries via cooperative management of three-dimensional karst datasets analogous to programs in several states.

Florida↗

Effects of 6PPD, 6PPD-quinone, and potential alternatives on freshwater mussels.

N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD) is an antioxidant and antiozonant widely used in tires. When 6PPD reacts with ozone, it transforms into a breakdown product called 6PPD-quinone (6PPDQ). Both compounds are currently being studied because of their high aquatic toxicity to fish, particularly coho salmon ( Oncorhynchus kisutch ). The Washington State Legislature directed Ecology to perform an Alternatives Assessment on 6PPD in motor vehicle tires. The goal is to identify and evaluate potential replacement compounds for these products. As part of this work, Ecology is studying how potential alternatives interact with species of concern and compare those effects with what is already known about 6PPD and 6PPDQ. One of those species of concern is freshwater mussels. Freshwater mussels are an imperiled group of organisms with high cultural and ecological significance. However, there are major data gaps concerning how 6PPD affects aquatic species other than salmonids. Mussels are of particular concern due to their unique parasitic life cycle where a fish host is required to fully develop into a juvenile. If their fish host is sensitive to 6PPD, mussel populations could also be at risk. This project aims to determine lethal and sublethal toxicity of 6PPD, 6PPDQ, and any potential alternatives to freshwater mussels. This objective will be accomplished by conducting acute toxicity tests with the compounds to determine median lethal concentrations (LC 50 s) of the tested compounds to freshwater mussels. Sublethal toxicity will be studied by then determining if the presence of 6PPD, 6PPDQ, and potential alternatives impacts the mussel’s ability to use a fish host for the important parasitic stage of its life cycle.

Washington↗

Kelp forest monitoring at Naval Base Ventura County, San Nicolas Island, California: Fall 2018 and Spring 2019, fifth annual report

Introduction Kelp forests and rocky reefs are among the most recognized marine ecosystems and provide the primary habitat for several species of fishes, invertebrates, and algal assemblages (Stephens and others, 2006). In addition, kelp forests have been shown to be important carbon dioxide sinks (Wilmers and others, 2012) and are an important source of nearshore marine primary production (Duggins and others, 1989). These highly dynamic ecosystems are extremely variable, and both top-down and bottom-up ecological controls drive this rich trophic environment. Giant kelp ( Macrocystis pyrifera ) forests and the species that inhabit these ecosystems are influenced by several environmental conditions, such as wave exposure, water temperature, water clarity, bottom depth and composition, species composition, and the density of kelp and other algal assemblages (Schiel and Foster, 2015). However, in addition to “normal” variability, kelp forests can undergo extreme regime shifts from kelp canopy forested areas to barrens characterized by high densities of urchins and encrusting coralline algae (Harrold and Reed, 1985). San Nicolas Island (SNI), outermost of the California Channel Islands, is home to a diverse group of terrestrial and marine organisms and includes kelp bed and rocky reef habitats ( fig. 1 ). The SNI kelp forests not only provide food and shelter for fishes and invertebrates within the habitat, but also they support higher trophic level consumers such as marine birds and several marine mammal species including the southern sea otter ( Enhydra lutris nereis) , a major predator on sea urchins and other marine invertebrates. Owing to concern about the vulnerability of the California population, the U.S. Fish and Wildlife Service (USFWS) translocated 140 southern sea otters from the central California coast to SNI between 1987 and 1990. Although only approximately 14 translocated otters are thought to have remained at SNI (U.S. Fish and Wildlife Service, 2012), their population at the island has increased and is currently greater than 120 individuals (Hatfield and others, 2019). Sea otters are a natural part of the kelp forest ecosystem, but their presence has implications for community dynamics as they repopulate a region from which they were extirpated in the 19th century. At SNI, sea otters have been concentrated mostly around the west end of the island, with some use of the south side and very little, but expanding, use of the northeast side. An ecosystem shift from urchin dominated to kelp dominated, that occurred at a site at the west end of the island in the early 2000s, though initiated by sea urchin disease, was likely facilitated to some degree by sea otter foraging (Kenner and Tinker, 2018). These ecosystems also are the target of many fisheries, including urchin and lobster. Urchin fisheries, which target the larger red sea urchin, may release the smaller but more mobile purple sea urchin from competitive control (Dayton and others, 1998). Lobster fisheries may release purple sea urchins from predatory control (Lafferty, 2004). Owing to the distance from the mainland, however, SNI kelp forests and reefs have been somewhat protected from the degree of harvest and other anthropogenic impacts experienced by the southern California mainland. Invasive species are another issue, and there are a few invasive subtidal macroalgae of concern in southern California waters. Although the brown alga Sargassum muticum has been established at the island for decades, S. horneri has only recently been seen at SNI and, so far, the invasive kelp Undaria pinnatifida and the green alga Caulerpa taxifolia have not been observed there. Sargassum horneri , in particular, has demonstrated a capability to outcompete native kelps at some of the other Channel Islands but it is unclear what indirect effects it may have on community structure (Marks and others, 2015). Because the surrounding kelp forests fall within the management boundary of the SNI Integrated Natural Resources Management Plan (INRMP; U.S. Navy, 2015), USGS works with the Navy to provide surveys of this ecologically important ecosystem that inform natural resource managers of trends in the population abundance of particular species. In addition, long-term surveys allow for an understanding of potential changes in species diversity and community composition as a result of trophic or other interactions. The U.S. Geological Survey (USGS) implemented a kelp forest monitoring program for the U.S. Navy at San Nicolas Island in 2014, building on sites and methods established by USFWS scientists in 1980 ( appendix 1 ). This report focuses on data collected during sampling expeditions to these sites in fall 2018 (October 2–5) and spring 2019 (April 3–6). Together they will be herein referred to as year 5 because, although the trips were made in different calendar years, they were approximately 6 months apart and were conducted under the fifth year of this contract. The previous sampling year (fall 2017 and spring 2018) is referred to as year 4. The year 5 data are compared with data collected during eight trips from fall 2014 through spring 2018. Differences in counts between these expeditions can result from seasonal factors, stochastic variation, or sampling error, but temporal comparison can reveal population trends. Where appropriate, long-term data collected during the 33 years prior to the implementation of these slightly revised protocols will be presented in order to lend some context to the observations reported here. Genus and species names used in this report are those currently recognized as valid in the Integrated Taxonomic Information System (ITIS.gov). Upon first use, the name recognized as valid by the World Register of Marine Species (WoRMS; marinespecies.org) is shown in brackets if different. The exception is Sargassum horneri which does not show up in any discernable form in ITIS.gov.

California↗

Geologic framework for the national assessment of carbon dioxide storage resources: Alaska North Slope and Kandik Basin, Alaska

This report presents fourteen storage assessment units (SAUs) from the Alaska North Slope and two SAUs from the Kandik Basin of Alaska. The Alaska North Slope is a broad, north-dipping coastal plain that is underlain by a thick succession of sedimentary rocks that accumulated steadily throughout much of the Phanerozoic during three major tectonic sequences: the Mississippian through Triassic Ellesmerian sequence, the Jurassic through Lower Cretaceous Beaufortian sequence, and the Cretaceous and Tertiary Brookian sequence. Stratigraphic packages associated with all three of these tectonic sequences are suited to geologic carbon dioxide (CO 2 ) sequestration. The lower part of the Ellesmerian sequence contains five potential SAUs, two of which have reservoirs within the Endicott Group and three of which have reservoirs within the Lisburne Group. Another potential SAU has sandstone-prone reservoir units interbedded with the upper part of the Ellesmerian Shublik Formation and the Beaufortian Kingak Shale. The Brookian sequence contains eight potential SAUs that have reservoirs that are defined by the various Cretaceous and Tertiary deltaic topset strata of the Colville foreland basin as well as associated slope aprons and submarine turbidite fan complexes. In east-central Alaska, Kandik Basin is an extension of cratonic North America and straddles the border between Alaska and Canada. The basin contains a section of Neoproterozoic to Mesozoic rocks, which have been multiply deformed during the Phanerozoic. Paleozoic strata within the basin appear to be suited to geologic CO 2 sequestration. We defined two SAUs within this interval, which are the Upper Devonian and Mississippian Nation River Formation SAU and the Lower Permian to Lower Cretaceous Step Conglomerate and Tahkandit Limestone SAU. For each SAU in both of the basins, we discuss the areal distribution of suitable CO 2 sequestration reservoir rock. We also characterize the overlying sealing unit and describe the geologic characteristics that influence the potential CO 2 storage volume and reservoir performance. These characteristics include reservoir depth, gross thickness, net thickness, porosity, permeability, and groundwater salinity. Case-by-case strategies for estimating the pore volume existing within structurally and (or) stratigraphically closed traps are presented. Although assessment results are not contained in this report, the geologic information included herein was employed to calculate the potential storage volume in the various SAUs. Lastly, in this report, we present the rationale for not conducting assessment work in fifteen sedimentary basins distributed across the Alaskan interior and within Alaskan State waters.

Alaska↗

Statistical Stationarity of Sediment Interbed Thicknesses in a Basalt Aquifer, Idaho National Laboratory, Eastern Snake River Plain, Idaho

The statistical stationarity of distributions of sedimentary interbed thicknesses within the southwestern part of the Idaho National Laboratory (INL) was evaluated within the stratigraphic framework of Quaternary sediments and basalts at the INL site, eastern Snake River Plain, Idaho. The thicknesses of 122 sedimentary interbeds observed in 11 coreholes were documented from lithologic logs and independently inferred from natural-gamma logs. Lithologic information was grouped into composite time-stratigraphic units based on correlations with existing composite-unit stratigraphy near these holes. The assignment of lithologic units to an existing chronostratigraphy on the basis of nearby composite stratigraphic units may introduce error where correlations with nearby holes are ambiguous or the distance between holes is great, but we consider this the best technique for grouping stratigraphic information in this geologic environment at this time. Nonparametric tests of similarity were used to evaluate temporal and spatial stationarity in the distributions of sediment thickness. The following statistical tests were applied to the data: (1) the Kolmogorov-Smirnov (K-S) two-sample test to compare distribution shape, (2) the Mann-Whitney (M-W) test for similarity of two medians, (3) the Kruskal-Wallis (K-W) test for similarity of multiple medians, and (4) Levene's (L) test for the similarity of two variances. Results of these analyses corroborate previous work that concluded the thickness distributions of Quaternary sedimentary interbeds are locally stationary in space and time. The data set used in this study was relatively small, so the results presented should be considered preliminary, pending incorporation of data from more coreholes. Statistical tests also demonstrated that natural-gamma logs consistently fail to detect interbeds less than about 2-3 ft thick, although these interbeds are observable in lithologic logs. This should be taken into consideration when modeling aquifer lithology or hydraulic properties based on lithology.

Scientific Investigations Report↗

Incorporating climate data into emergency planning and exercises: A primer for emergency management practioners and data developers

Climate change has and will continue to sharpen climate-related risks to communities and natural resources in California and elsewhere, as the probabilities of more extreme weather, floods, and fires continue to increase. This poses a problem of novel situations for emergency management. Progress has been made in terms of formally incorporating climate projections, data, and research on expected changes in climate-driven hazards into long-term hazard mitigation and climate adaptation strategies at both state and national levels. However, there are fewer examples of how climate change considerations have, or could be, incorporated into shorter-term emergency preparedness and response strategies. This is an important gap to fill, as climate resilience depends not only on mitigation and prevention measures, but also on the ability of agencies to coordinate and effectively minimize impacts when prevention measures fall short. The goal of this primer is to provide guidance on how to incorporate the best available information on climate variability and change into emergency management planning, with a focus on the development and use of extreme weather event scenarios for use in exercises. The first section is aimed toward a broad audience, including emergency management practitioners who use extreme weather event scenarios. It provides an overview of available data and tools that can inform scenario design as well as techniques for scenario design based on the hazard of interest, the audience and application, and the technical skills and resources required to develop, summarize, and/or visualize the data. This section concludes with an overview of approaches and lessons learned related to extreme event response planning and exercise design. Overall, this section highlights the advantages of developing quantitative scenarios based on spatial data, which allows visualizations and interactive data explorations that can provide greater specificity in discussions related to preparedness and response strategies. It further highlights the advantages of developing a core expert working group to guide planning, holding pre-exercise workshops to engage diverse communities outside of the emergency management sector, and engaging decisionmakers post-exercise to communicate key issues and outcomes as well as potential approaches for mitigating consequences that were identified by participants. The second section is aimed toward the scientific community and data developers involved in the creation of extreme weather event scenarios. This section provides technical guidance and detailed descriptions of four types of data resources and five analytical approaches that can be used to create extreme weather event scenarios based on the design considerations highlighted in section one. The computational resources and expertise required varies substantially across the options presented and is a primary consideration. These requirements, in addition to considerations related to audience and application, may determine the novelty and detail of the event, the detail of weather forecast information that can be provided, and the spatial extent across which the event can reasonably be modeled. The importance of, and approaches for, delivering information in a form that is accessible to emergency management practitioners is also discussed.

Report↗

Spatial scale dependence of error in fractional component cover maps

Geospatial products such as fractional vegetation cover maps often report overall, pixel-wise accuracy, but decision-making with these products often occurs at coarser scales. As such, data users often desire guidance on the appropriate spatial scale to apply these data. We worked toward establishing this guidance by assessing RCMAP (Rangeland Condition Monitoring Assessment and Projection) accuracy relative to a series of high-resolution predictions of component cover. We scale the 2-m and RCMAP predictions to various focal window sizes scales ranging from 30 to 1 500 m using focal averaging. We also evaluated variation in scaling effects on error at ecoregion and pasture (mean area of 1 050 ha) scales. Our results demonstrate increased accuracy at broader windows, across all components, and most increases in accuracy level off at ∼200–600 m scales. At the scale with highest accuracy, cross-component average correlation ( r ) increased by 6.5%, and root mean square error (RMSE) was reduced 46.4% relative to 30-m scale data. Scaling-related improvements to accuracy were greatest in components such as shrub and tree with more spatially heterogeneous cover and in ecoregions with more spatially heterogenous cover. When components were aggregated at the pasture scale, r increased 10% and RMSE decreased 34.3% on average relative to the 30-m scale. Our results provide empirical data on the scale dependence of error, which fractional cover data users may consider alongside their needs when using these data. Although the general principle remains that remotely sensed products are intended to address landscape-scale questions, our analysis indicates that applying data at finer than landscape spatial scales and grouping even a handful of pixels resulted in lowered error compared to pixel-level comparisons. Our results quantify the trade-offs between data granularity and error related to scale for fractional vegetation cover.

western United States↗

Forward

No abstract available.

Book chapter↗

Lower trophic level monitoring implementation plan for Barataria Basin: Protocols and programmatic management

Prior work completed by Kiskaddon et al. (2021, 2022b, 2022a) identified critical data gaps for Lower Trophic Level (LTL) organisms in Barataria Basin, Louisiana. A Monitoring and Adaptive Management (MAM) Activity Implementation Plan (MAIP) was subsequently developed to describe a MAM Activity that would address and fill these critical data gaps (hereafter termed the “LTL project”). As the lead implementing Trustee of the LTL project, the National Oceanic and Atmospheric Administration (NOAA), in collaboration with the Louisiana Trustee Implementation Group (LA TIG), is charged with implementing the LTL project (NOAA, 2022). The Water Institute (the Institute), in cooperation with federal, state, and private entities including NOAA, the U.S. Geological Survey (USGS), Louisiana State University (LSU), University of Louisiana at Lafayette (UL Lafayette), University of California (UC) Santa Cruz, and Dynamic Solutions, LLC developed this implementation plan to further detail LTL data collection in Barataria Basin that will fulfill the MAIP. This monitoring implementation plan describes procedures and protocols critical for data collection and project management.

Louisiana↗

Geologic/geomorphologic map of the Chryse Planitia region of Mars

Since the 1970’s, when the Mariner 9 spacecraft revealed the geologic diversity of Mars, the Chryse Planitia region has been noted for its immense outflow channels and chaotic terrain (McCauley and others, 1972; Sharp and Malin , 1975; Baker, 1982, chap. 3; Mars Channel Working Group , 1983). Various proposals for the origin of these features have been offered; most workers have favored a mechanism in which ground water or water-rich debris was expelled from beneath a frozen crust, leading to catastrophic debris flows o r floods that may have contained significant amounts of ice (Baker and Milton, 1974; Carr , 19 79; Nummedal and Prior, 1981; Lucchitta , 1982 ; MacKinnon and Tanaka, 1989). The channels originated on or near the flanks of the volcanotectonic rises of Tharsis (whose east margin is in the west edge of the map region) and Valles Marineris , which suggests that tectonics and igneous activity led to the conditions for discharge. Estimated discharge rates for some channels exceed thos of prehistoric floods on Earth ( Carr , 1979; Komar , 1979; Robinson and Tanaka, 1990) . Some workers think that the discharges may have led to the development of temporary oceans that filled the northern lowlands (Parker and others, 1989; Baker and others, 1991). The Chryse basin ( Chryse and southern Acid alia Planitiae ), which is part of those lowlands, apparently has been the site of lava and sediment deposition (Greeley and others, 1977; Scot and T anaka, 1986).

IMAP↗

The Longview/Lakeview barite deposits, southern National Petroleum Reserve, Alaska (NPRA) — Potential-field models and preliminary size estimates

Longview and Lakeview are two of the larger stratiform barite deposits hosted in Mississippian Akmalik Chert in the Cutaway Basin area (Howard Pass C-3 quadrangle) of the southern National Petroleum Reserve, Alaska (NPRA). Geologic studies for the South NPRA Integrated Activity Plan and Environmental Impact Statement process included an attempt to evaluate the possible size of barite resources at Longview and Lakeview by using potential-field geophysical methods (gravity and magnetics). Gravity data from 227 new stations measured by the U.S. Geological Survey, sparse regional gravity data, and new, high-resolution aeromagnetic data were forward modeled simultaneously along seven profiles perpendicular to strike and two profiles along strike of the Longview and Lakeview deposits. These models indicate details of the size and shape of the barite deposits and suggest thicknesses of 15 to 24 m, and 9 to 24 m for the Longview and Lakeview deposits, respectively. Two groups of outcrops span 1.8 km of strike length and are likely connected below the surface by barite as much as 10 m thick. Barite of significant thickness (>-5 m) is unlikely to occur north of the presently known exposures of the Longview deposit. The barite bodies have irregular (nonplanar) bases suggestive of folding; northwest-trending structures of small apparent offset cross strike at several locations. Dip of the barite is 10 to 25 degrees to the southeast. True width of the bodies (the least certain dimension) is estimated to be 160 to 200 m for Longview and 220 to 260 m for Lakeview. The two bodies contain a minimum of 4.5 million metric tons of barite and more than 38 million metric tons are possible. Grades of the barite are relatively high, with high specific gravities and low impurities. The potential for the Cutaway Basin to host economically minable quantities of barite is uncertain. Heavy-mineral concentrate samples from streams in the area, trace-element analyses, and physicalproperty measurements of bulk samples derived from trenching or drilling would be valuable for future assessment work.

Alaska↗