USGS Science⌕ Search

SEARCH · USGS Science

Results for “Scanning”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources
USGS2022

Microbially induced anaerobic oxidation of magnetite to maghemite in a hydrocarbon-contaminated aquifer

Iron mineral transformations occurring in hydrocarbon-contaminated sites are linked to the biodegradation of the hydrocarbons. At a hydrocarbon-contaminated site near Bemidji, Minnesota, USA, measurements of magnetic susceptibility (MS) are useful for monitoring the natural attenuation of hydrocarbons related to iron cycling. However, a transient MS, previously observed at the site, remains poorly understood and the iron mineral phases acting as reactants and products associated with this MS perturbation remain largely unknown. To address these unknowns, we acquired mineral magnetism measurements, including hysteresis loops, backfield curves, and isothermal remanent magnetizations on sediment core samples retrieved from the site and magnetite-filled mineral packets installed within the aquifer. Our data show that the core samples and magnetite packs display decreasing magnetization with time and that this loss in magnetization is accompanied by increasing bulk coercivity consistent with decreased average grain size and/or partial oxidation. Low-temperature magnetometry on all samples displayed behavior consistent with magnetite, but samples within the plume also show evidence of maghemitization. This interpretation is supported by the occurrence of shrinkage cracks on the surface of the grains imaged via scanning electron microscopy. Magnetite transformation to maghemite typically occurs under oxic conditions, here, we propose that maghemitization occurs within the anoxic portions of the plume via microbially mediated anaerobic oxidation. Mineral dissolution also occurs within the plume. Microorganisms capable of such anaerobic oxidation have been identified within other areas at the Bemidji site, but additional microbiological studies are needed to link specific anaerobic iron oxidizers with this loss of magnetization.

Minnesota↗
USGS2025

A method to obtain remotely sensed grain size distributions from nonplanar granular deposits

Constraining the grain size distribution of granular deposits with complex surfaces is difficult with existing approaches. Field and laboratory techniques are time consuming and limited by the maximum grain size that laboratories can accommodate. In this study, we present a new method to identify the coarse fraction of the grain size distribution at a debris-flow fan deposit surveyed with terrestrial laser scanning (TLS) in Glenwood Canyon, Colorado, USA. This method is a novel grain segmentation algorithm developed for application to point cloud data of deposits with complex surfaces and angular grains ranging in size from centimeters to a meter. This approach combines an existing random forest machine learning method with a novel iterative clustering algorithm. We compared the grain size distribution from our algorithm with a Wolman pebble count conducted in the field, and found a root mean squared error of less than 2 cm from the 5th to 95th percentile of the grain size distribution of grains ranging from cobble to boulder sized (6.3–78 cm in our application). Finally, we compared our new algorithm with an existing open-source grain segregation algorithm, and our method outperformed the selected alternative when applied to the debris-flow deposit point cloud.

Colorado↗
USGS2012

Upper crustal densities derived from sea floor gravity measurements: Northern Juan De Fuca Ridge

A transect of sea floor gravity stations has been analyzed to determine upper crustal densities on the Endeavour segment of the northern Juan de Fuca Ridge. Data were obtained using ALVIN along a corridor perpendicular to the axis of spreading, over crustal ages from 0 to 800,000 years. Calculated elevation factors from the gravity data show an abrupt increase in density with age (distance) for the upper 200 m of crust. This density change is interpreted as a systematic reduction in bulk porosity of the upper crustal section, from 23% for the axial ridge to 10% for the off-axis flanking ridges. The porosity decrease is attributed to the collapse and filling of large-scale voids as the abyssal hills move out of the crustal formation zone. Forward modeling of a plausible density structure for the near-axis region agrees with the observed anomaly data only if the model includes narrow, along-strike, low-density regions adjacent to both inner and outer flanks of the abyssal hills. The required low density zones could be regions of systematic upper crustal fracturing and faulting that were mapped by submersible observers and side-scan sonar images, and whose presence was suggested by the distribution of heat flow data in the same area.

Geophysical Research Letters↗
USGS2010

Turbidite systems: State of the art and future directions

The study of turbidite systems covering a wide range of physical scales has led to confus ion regarding the use of certain key terms and hence a breakdown in communication between workers involved in turbidite research. There are three fundamentally different scales and types of observations derived from the study of outcrop data (ancient systems), high-resolution seismic reflection and side scan sonar data (modern systems), and multichannel seismic reflection data (modern and older buried systems). Despite the variability of scale the same terms are used to describe features that may have little in common. Consequently, turbidite system terminology has become imprecise and even misleading in some cases, thus providing impediments to developing useful predictive models for processes, depositional environments, and lateral and vertical distribution of sand bodies within turbidite systems. To address this concern, we review the principal elements critical to deepwater systems: slump scars, submarine canyons, channels, channel fill deposits, overbank deposits, and lobes and discuss some of their recognition criteria with each different type of data base. Local and regional tectonic setting, relative sea level variations, and bottom current activity are probably the main factors that control size, external geometry, internal stratal configuration, and facies characteristics of both modern and ancient turbidite systems. These factors ultimately control the timing and bounding characteristics between stages of growth of deepwater systems. If comparison of elements from different turbidite deposits using various data types is carried out at similar physical and temporal scales, predictive models eventually may be improved.

Reviews of Geophysics↗
USGS1996

Submarine landslides

Landslides are common on inclined areas of the seafloor, particularly in environments where weak geologic materials such as rapidly deposited, finegrained sediment or fractured rock are subjected to strong environmental stresses such as earthquakes, large storm waves, and high internal pore pressures. Submarine landslides can involve huge amounts of material and can move great distances: slide volumes as large as 20,000 km3 and runout distances in excess of 140 km have been reported. They occur at locations where the downslope component of stress exceeds the resisting stress, causing movement along one or several concave to planar rupture surfaces. Some recent slides that originated nearshore and retrogressed back across the shoreline were conspicuous by their direct impact on human life and activities. Most known slides, however, occurred far from land in prehistoric time and were discovered by noting distinct to subtle characteristics, such as headwall scarps and displaced sediment or rock masses, on acoustic-reflection profiles and side-scan sonar images. Submarine landslides can be analyzed using the same mechanics principles as are used for occurrences on land. However, some loading mechanisms are unique, for example, storm waves, and some, such as earthquakes, can have greater impact. The potential for limited-deformation landslides to transform into sediment flows that can travel exceedingly long distances is related to the density of the slope-forming material and the amount of shear strength that is lost when the slope fails.

Reviews of Geophysics↗
USGS2011

Airborne laser study quantifies El Niño-induced coastal change

Winter storms during the 1997–1998 El Niño caused extensive changes to the beaches and cliffs of the west coast of the United States, a NASA-NOAA-USGS investigation using a scanning airborne laser has found. For example, near Pacifica in central California, the cliff eroded locally as much as 10–13 m landward during the El Niño winter, at least 40 times the long term average erosion rate. However, only several hundred meters away the cliff was stable. This variability in cliff response may be related to differences in local beach changes where an accreting beach protected part of the cliff and an eroding beach exposed another part to attack by waves.

Pacific Coast↗
USGS2012

The giant submarine alika debris slide, Mauna Loa, Hawaii

A 4000‐km 2 area of submarine slump and slide deposits along the west flank of Mauna Loa volcano has been mapped with GLORIA side‐scan sonar images, seismic reflection profiles, and new bathymetry. The youngest deposits are two debris avalanche lobes that travelled from their breakaway area near the present shoreline as much as 100 km into the Hawaiian Deep at water depths of 4800 m. The two lobes partly overlap and together are designated the Alika slide. They were derived from the same source area and probably formed in rapid succession. Distinction hummocky topography, marginal levees, and other features on lower slopes (0.3°–0.6°) of these deposits resemble subaerial volcanic debris avalanche deposits such as 1980 Mount St. Helens and suggest high emplacement velocities. The breakaway area for the Alika slide (10°–15° slopes) is characterized by large block slumps, bounded by normal faults, that probably represent multiple subsidence events before, during, and after the debris avalanches. Lower slopes of the slide contain distinctive lobate‐terraced deposits that are interpreted as having been emplaced more slowly, prior to the debris avalanches. Estimated thicknesses of 50–200 m suggest volumes of 200–600 km 3 for the two lobes. The combined volume of the entire slide and slump terrane is probably 1500–2000 km 3 . The slide deposits predate a 13‐ka coral reef and probably postdate the block‐faulted Ninole Basalt, roughly dated as a few hundred thousand years old. The Alika slide, or a similar deposit recognized on GLORIA images further north along the Hawaiian Ridge, probably triggered a giant wave that washed 325 m high on Lanai at about 100 ka. Slumping on Mauna Loa has been most intense adjacent to the large arcuate bend in its southwest rift zone, as the rift zone migrated westward away from the growing Kilauea volcano. Slumping events were probably triggered by seismic activity accompanying dike injection along the rift zone. Such massive slumps, landslides, and distal submarine turbidity flows appear to be widespread on the flanks of Hawaiian volcanoes.

Journal of Geophysical Research↗
USGS2012

Morphology and growth history of Delgada Fan: Implications for the Neogene evolution of Point Arena Basin and the Mendocino Triple Junction

Long-range side scan (GLORIA) sonographs and seismic reflection data acquired during a survey of the western U.S. Exclusive Economic Zone in 1984, coupled with information from Deep Sea Drilling Project sites, provide new insights into the growth and evolution of the Delgada Fan. Construction of the fan commenced in the latest Miocene (∼6 Ma) following the filling of the Neogene Point Arena Basin. The fan presently covers more than 50×10 3 km 2 of the Pacific plate and contains approximately 15×10 3 km 3 of predominantly terrigenous detritus. The large size of the fan is incompatible with the small present-day supply of sediment to the canyon system. The GLORIA data show the Delgada Fan to be a hybrid-type fan, exhibiting characteristics of both elongate and radial fans. The morphology and volume of the fan, along with evidence for a decline in accumulation rates on the lower fan during the Quaternary period, suggest that the fan experienced an early growth phase (latest Miocene and Pliocene) characterized by relatively rapid progradation of elongate fan lobes followed by a period (Quaternary) of slower growth that has featured a shift of depocenters to sites closer to the canyons and a transition to distributary channels bordered by less prominent levees and overbank deposits. We examine the growth of Delgada Fan in relation to the Neogene evolution of the North American-Pacific plate boundary using a series of paleogeographic reconstructions based on recently published time displacement histories of the Mendocino triple junction (MTJ), the San Andreas fault (SAF), and the Pacific plate, upon which the fan rests. The time displacement curves for the SAF and the MTJ suggest that the MTJ and Mendocino Fracture Zone overtook and passed Point Arena Basin at about 10 Ma when the basin lay immediately southwest of the present San Francisco Bay area. We suggest that the MTJ joined the SAF at approximately that time and location, thus making the SAF the master fault in the transform system. This interpretation is compatible with evidence from seismic reflection profiles over the fan, which demonstrate that the fan and the canyon system and therefore Point Arena Basin have moved as a unit since the inception of fan growth (∼6–7 Ma). Point Arena Basin lay southwest of the San Francisco area at 10–12 Ma, and the passage of the MTJ caused the disruption of the forearc shelf and slope and the development of local uplifted and subsiding blocks. In particular, uplift of the “bay block” immediately east of the SAF may have provided the source area for the late Miocene sediments that filled Point Arena Basin and set the stage for the growth of Delgada Canyon and Fan system. The growth rate of the fan has decreased, and the style of deposition has changed as the system was tectonically transported to its present location adjacent to the small youthful drainages of the King Range.

Journal of Geophysical Research Solid Earth↗
USGS1970

Geological significance of coccoliths in fine-grained carbonate bands of postglacial Black Sea sediments

The origin of fine carbonate muds in deep parts of the Black Sea has been explained in various ways, but details of how the carbonate was formed are poorly understood. We have studied samples containing fine carbonate from cores obtained during the cruise of Atlantis II (Woods Hole Oceanographic Institute) to the Black Sea in April and May 1969. Examination of the light-coloured bands and darker bands by scanning electron micrographs and light microscopy shows that Holocene coccoliths are the overwhelmingly dominant constituents in the light bands, whereas Cretaceous and Eocene coccoliths are important components of the carbonate in the darker matrix.

Nature↗
USGS2020

Mechanics of near-field deformation during co- and post-seismic shallow fault slip

Poor knowledge of how faults slip and distribute deformation in the shallow crust hinders efforts to mitigate hazards where faults increasingly intersect with the expanding global population at Earth’s surface. Here we analyze two study sites along the 2014 M 6.0 South Napa, California, earthquake rupture, each dominated by either co- or post-seismic shallow fault slip. We combine mobile laser scanning (MLS), active-source seismic tomography, and finite element modeling to investigate how deformation rate and mechanical properties of the shallow crust affect fault behavior. Despite four orders-of-magnitude difference in the rupture velocities, MLS-derived shear strain fields are remarkably similar at the two sites and suggest deceleration of the co-seismic rupture near Earth’s surface. Constrained by the MLS and seismic data, finite element models indicate shallow faulting is more sensitive to lithologic layering and plastic yielding than to the presence of fault compliant zones (i.e., regions surrounding faults with reduced stiffness). Although both elastic and elastoplastic models can reproduce the observed surface displacement fields within the uncertainty of MLS data, elastoplastic models likely provide the most reliable representations of subsurface fault behavior, as they produce geologically reasonable stress states and are consistent with field, geodetic, and seismological observations.

California↗
USGS2020

Morphological, elemental, and boron isotopic insights into pathophysiology of diseased coral growth anomalies

Growth anomalies (GAs) impact both coral skeleton and soft tissues and are detrimental to reef health. This tumor-like disease is increasingly found throughout the tropics and is commonly associated with high human population density, yet little is known about the etiology, pathology, or calcification behavior of the disease. Here, we investigate potential mechanisms involved in the development of GAs through chemical and morphological characterization of GA skeletons in Porites compressa from a site of high disease prevalence (Coconut Island, Hawaii). A comprehensive suite of trace elements and boron isotopes (δ11B) were measured in skeletal GAs to assess calcification behavior and uptake of essential and toxic metals. Scanning electron microscopy of GA skeleton revealed it to be highly porous consisting of a matrix with a disorganized crystal structure, in contrast to the dense well-organized normal skeleton of P. compressa. Elemental analyses revealed decreased Mg/Ca and increased U/Ca in GA skeletons relative to paired unaffected samples, suggesting a decreased abundance of rapidly accreting microstructures “centers of calcification” in the GAs. Estimates of carbonate system parameters based on δ11B and B/Ca measurements indicate reduced pH (–0.05 units) and [CO32–] within the calcifying fluid of GAs, which may have implications for GA calcification. Higher levels of essential (V/Ca and Mo/Ca) elements in GAs potentially indicate increased abundance of holobiont-associated, nitrogen-fixing bacteria and higher Sb/Ca and Nd/Ca indicate alteration in the accumulation/depuration of these toxic metals. In aggregate, our findings show that dystrophic calcification processes could explain structural differences seen in GA vs unaffected skeletons and highlight the use of approaches herein to shed light on disease pathophysiology in corals.

Scientific Reports↗
USGS2024

Cathodoluminescence differentiates sedimentary organic matter types

High-resolution scanning electron microscopy (SEM) visualization of sedimentary organic matter is widely utilized in the geosciences for evaluating microscale rock properties relevant to depositional environment, diagenesis, and the processes of fluid generation, transport, and storage. However, despite thousands of studies which have incorporated SEM methods, the inability of SEM to differentiate sedimentary organic matter types has hampered the pace of scientific advancement. In this study, we show that SEM-cathodoluminescence (CL) properties can be used to identify and characterize sedimentary organic matter at low thermal maturity conditions. Eleven varied mudstone samples with a broad array of sedimentary organic matter types, ranging from the Paleoproterozoic to Eocene in age, were investigated. Sedimentary organic matter fluorescence intensity and CL intensity showed an almost one-to-one correspondence, with certain exceptions in three samples potentially related to radiolytic alteration. Therefore, because CL emission can be used as a proxy for fluorescence emission from sedimentary organic matter, CL emission during SEM visualization can be used to differentiate fluorescent from non-fluorescent sedimentary organic matter. This result will allow CL to be used as a visual means to quickly differentiate sedimentary organic matter types without employing correlative optical microscopy and could be widely and rapidly adapted for SEM-based studies in the geosciences.

Scientific Reports↗
USGS2017

Evaluation of laser ablation double-focusing SC-ICPMS for “common” lead isotopic measurements in silicate glasses and mineral

An analytical method for the in situ measurement of “common” Pb isotope ratios in silicate glasses and minerals using a 193-nm excimer laser ablation (LA) system with a double-focusing single-collector (SC)-ICPMS is presented and evaluated as a possible alternative to multiple-collector (MC)-ICPMS. This LA-SC-ICPMS technique employs fast-scanning ion deflectors to sequentially place a series of flat-topped isotope peaks into a single ion-counting detector at a fixed accelerating voltage and magnetic field strength. Reference materials (including NIST, MPI-DING, and USGS glasses) are used to identify two analytical artifacts on the Pb isotope ratios (expressed here as heavier/lighter isotopes) when corrected for mass bias relative to NIST SRM610. The first artifact is characterized by anomalously low Pb isotope ratios (~0.1%/AMU) when SRM610 is analyzed in raster mode as an unknown at small spot sizes (<25 µm), which may indicate that (1) SRM610 is isotopically heterogeneous on a small length scale and/or (2) there is a non-spectral matrix effect on the Pb isotope ratios related to differences in spot size. The second artifact is characterized by anomalously high Pb isotope ratios (<0.1%/AMU) for NIST SRM612 (in raster mode) and some Fe-rich glass reference materials (BCR-2G, GOR132-G, and T1-G). These offsets are thought to be caused by one or more non-spectral matrix effects related to differences in the ablation behavior, composition, or physical properties of these reference materials compared to the bracketing SRM610 standard. The precision (±2SD) of our LA-SC-ICPMS Pb isotopic measurements is similar to ( 207 Pb/ 206 Pb and 208 Pb/ 206 Pb, or 20X Pb/ 206 Pb) or better than ( 206 Pb/ 204 Pb, 207 Pb/ 204 Pb, and 208 Pb/ 204 Pb, or 20X Pb/ 204 Pb) a series of published studies that used a different type of SC-ICPMS and obtained a factor of ~3-4 higher sensitivity for Pb. An increase in the sensitivity of our LA-SC-ICPMS would likely improve the precision of the 20X Pb/ 206 Pb and 20X Pb/ 204P b ratios for low-Pb materials (<5 ppm), possibly making the technique broadly similar to LA-MC-ICPMS (particularly compared to methods that rely upon at least one ion-counting detector). Further improvement in the precision of the 20X Pb/ 206 Pb and 20X Pb/ 204 Pb ratios for high-Pb materials (>5 ppm) by LA-SC-ICPMS is unlikely, and in this case, LA-MC-ICPMS remains the preferable analytical technique.

Journal of Analytical Atomic Spectrometry↗
USGS2002

The significance of pockmarks to understanding fluid flow processes and geohazards

Underwater gas and liquid escape from the seafloor has long been treated as a mere curiosity. It was only after the advent of the side-scan sonar and the subsequent discovery of pockmarks that the scale of fluid escape and the moonlike terrain on parts of the ocean floor became generally known. Today, pockmarks ranging in size from the 'unit pockmark' (1-10 m wide, <0.6 m deep) to the normal pockmark (10-700 m wide, up to 45 m deep) are known to occur in most seas, oceans, lakes and in many diverse geological settings. In addition to indicating areas of the seabed that are 'hydraulically active', pockmarks are known to occur on continental slopes with gas hydrates and in association with slides and slumps. However, possibly their potentially greatest significance is as an indicator of deep fluid pressure build-up prior to earthquakes. Whereas only a few locations containing active (bubbling) pockmarks are known, those that become active a few days prior to major earthquakes may be important precursors that have been overlooked. Pockmark fields and individual pockmarks need to be instrumented with temperature and pressure sensors, and monitoring should continue over years. The scale of such research calls for a multinational project in several pockmark fields in various geological settings.

Geofluids↗
USGS2000

Monitoring beach morphology changes using small-format aerial photography and digital softcopy photogrammetry

Current methods of monitoring beach morphology changes commonly involve the establishment of Global Positioning System profiles that are surveyed on a regular basis. Although this method produces precise measurements of coastal topography, it is costly in time and effort and may result in large data gaps between profiles. Much of our understanding of coastal dynamics is thus limited by profile spacing and survey frequency. Softcopy photogrammetry is increasingly being used as an alternative to assess shoreline change and study beach morphodynamics. This method of producing three-dimensional topographic models and orthophotographs from digitized aerial photography can aid in filling in the gaps between established profiles. A limiting factor to this technology is the cost of obtaining high-resolution aerial photography. We have developed an aerial mapping system designed to collect data in an efficient and cost-effective way. We use a small-format aerial photography system that can be mounted on a variety of small aircraft on short notice. After a flight, the photographs are scanned, and softcopy photogrammetry software is used to create both DTMs (Digital Terrain Models) and orthophotographs. The DTMs can be compared with existing profiles for accuracy, and volumetric changes can be computed. The orthophotos are used to make precise measurements of the position and morphology of shoreline features. This aerial mapping system is advantageous over previous methods of beach morphology change monitoring because it allows for rapid response to storm events and provides a cost-effective method of establishing a continual monitoring program in erosion hazard areas.

Environmental Geosciences↗
USGS2009

Use of airborne and terrestrial lidar to detect ground displacement hazards to water systems

We investigate the use of multiepoch airborne and terrestrial lidar to detect and measure ground displacements of sufficient magnitude to damage buried pipelines and other water system facilities that might result, for example, from earthquake or rainfall-induced landslides. Lidar scans are performed at three sites with coincident measurements by total station surveying. Relative horizontal accuracy is evaluated by measurements of lateral dimensions of well defined objects such as buildings and tanks; we find misfits ranging from approximately 5 to 12 cm, which is consistent with previous work. The bias and dispersion of lidar elevation measurements, relative to total station surveying, is assessed at two sites: (1) a power plant site (PP2) with vegetated steeply sloping terrain; and (2) a relatively flat and unvegetated site before and after trenching operations were performed. At PP2, airborne lidar showed minimal elevation bias and a standard deviation of approximately 70 cm, whereas terrestrial lidar did not produce useful results due to beam divergence issues and inadequate sampling of the study region. At the trench site, airborne lidar showed minimal elevation bias and reduced standard deviation relative to PP2 (6-20 cm), whereas terrestrial lidar was nearly unbiased with very low dispersion (4-6 cm). Pre- and posttrench bias-adjusted normalized residuals showed minimal to negligible correlation, but elevation change was affected by relative bias between epochs. The mean of elevation change bias essentially matches the difference in means of pre- and posttrench elevation bias, whereas elevation change standard deviation is sensitive to the dispersion of individual epoch elevations and their correlation coefficient. The observed lidar bias and standard deviations enable reliable detection of damaging ground displacements for some pipelines types (e.g., welded steel) but not all (e.g., concrete with unwelded, mortared joints). ?? ASCE 2009.

Journal of Surveying Engineering↗
USGS2009

Small-footprint, waveform-resolving lidar estimation of submerged and sub-canopy topography in coastal environments

The experimental advanced airborne research lidar (EAARL) is an airborne lidar instrument designed to map near-shore submerged topography and adjacent land elevations simultaneously. This study evaluated data acquired by the EAARL system in February 2003 and March 2004 along the margins of Tampa Bay, Florida, USA, to map bare-earth elevations under a variety of vegetation types and submerged topography in shallow, turbid water conditions. A spatial filtering algorithm, known as the iterative random consensus filter (IRCF), was used to extract ground elevations from a point cloud of processed last-surface EAARL returns. Filtered data were compared with acoustic and field measurements acquired in shallow submerged (0-2.5 m water depth) and sub-canopy environments. Root mean square elevation errors (RMSEs) ranged from 10-14 cm for submerged topography to 16-20 cm for sub-canopy topography under a variety of vegetation communities. The effect of lidar sampling angles and global positioning system (GPS) satellite configuration on accuracy was investigated. Results show high RMSEs for data acquired during periods of poor satellite configuration and at large sampling angles along the edges of the lidar scan. The results presented in this study confirm the cross-environment capability of a green-wavelength, waveform-resolving lidar system, making it an ideal tool for mapping coastal environments.

International Journal of Remote Sensing↗
USGS2012

Cross-sensor comparisons between Landsat 5 TM and IRS-P6 AWiFS and disturbance detection using integrated Landsat and AWiFS time-series images

Routine acquisition of Landsat 5 Thematic Mapper (TM) data was discontinued recently and Landsat 7 Enhanced Thematic Mapper Plus (ETM+) has an ongoing problem with the scan line corrector (SLC), thereby creating spatial gaps when covering images obtained during the process. Since temporal and spatial discontinuities of Landsat data are now imminent, it is therefore important to investigate other potential satellite data that can be used to replace Landsat data. We thus cross-compared two near-simultaneous images obtained from Landsat 5 TM and the Indian Remote Sensing (IRS)-P6 Advanced Wide Field Sensor (AWiFS), both captured on 29 May 2007 over Los Angeles, CA. TM and AWiFS reflectances were compared for the green, red, near-infrared (NIR), and shortwave infrared (SWIR) bands, as well as the normalized difference vegetation index (NDVI) based on manually selected polygons in homogeneous areas. All R 2 values of linear regressions were found to be higher than 0.99. The temporally invariant cluster (TIC) method was used to calculate the NDVI correlation between the TM and AWiFS images. The NDVI regression line derived from selected polygons passed through several invariant cluster centres of the TIC density maps and demonstrated that both the scene-dependent polygon regression method and TIC method can generate accurate radiometric normalization. A scene-independent normalization method was also used to normalize the AWiFS data. Image agreement assessment demonstrated that the scene-dependent normalization using homogeneous polygons provided slightly higher accuracy values than those obtained by the scene-independent method. Finally, the non-normalized and relatively normalized ‘Landsat-like’ AWiFS 2007 images were integrated into 1984 to 2010 Landsat time-series stacks (LTSS) for disturbance detection using the Vegetation Change Tracker (VCT) model. Both scene-dependent and scene-independent normalized AWiFS data sets could generate disturbance maps similar to what were generated using the LTSS data set, and their kappa coefficients were higher than 0.97. These results indicate that AWiFS can be used instead of Landsat data to detect multitemporal disturbance in the event of Landsat data discontinuity.

International Journal of Remote Sensing↗