USGS ScienceSearch

SEARCH · USGS Science

Results for “River Research and Applications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 29Linked to original sources

Geochemical geodatabase of sedimentary strata (coal, coal-adjacent rocks, tuffaceous oil shale, phosphate-rich rocks) and produced water in the Uinta region, Utah and Colorado

The Geochemical Geodatabase of Sedimentary Strata (Coal, Coal-adjacent Rocks, Tuffaceous Oil Shale, Phosphate-rich Rocks) and Produced Water in the Uinta Region, Utah and Colorado, consists of compiled datasets acquired as part of the Carbon Ore, Rare Earth, and Critical Mineral (CORE-CM) Uinta Region assessment funded by the U.S. Department of Energy (DEFE0032046, 2021–2024; Birgenheier et al., 2024). The CORE-CM assessment focused on providing comprehensive geological and geochemical characterization of current and prospective sedimentary-hosted resources including coal, oil shale, phosphatic limestone, and produced water from oil and gas targets present in eastern Utah and northwestern Colorado (Figure 1). This Data Series includes a geodatabase that consists of analytical geochemical data collected September 2021 through December 2024 via portable X-ray fluorescence (pXRF), and laboratory measured analyses produced by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectroscopy (ICP-OES). The coal-related geochemical data are derived primarily from the Cretaceous Blackhawk Formation and Ferron Sandstone of Utah, and the Mesaverde Group of Colorado. Additional non-coal resources assessed include oil shale-bearing strata of the Eocene upper Green River Formation (Utah and Colorado), phosphate-rich limestone of the Permian Park City Formation (Utah) and produced water from oil and gas-bearing strata of the Eocene Green River and Wasatch Formations (Uinta Basin) and the Pennsylvanian Paradox Formation (Paradox Basin) (Table 1). The CORE-CM assessment included a wide range of lithologies present in the coal, oil shale, and phosphate geologic resource systems whether or not the specific lithology has current economic value. Geochemical analyses of produced water from oil and gas wells focused on current and emerging hydrocarbon targets in the central Uinta Basin and northern Paradox Basin. A total of 13,092 geochemical analyses from these geologic systems is provided in the included geodatabase. A series of coal quality data (e.g., composition and maceral analyses) is also included in the database and was digitized from archived coal samples from the Utah Geological Survey (Appendix A).

Colorado, Utah

Developing, testing, and communicating earthquake forecasts: Current practices and future directions

While deterministically predicting the time and location of earthquakes remains impossible, earthquake forecasting models can provide estimates of the probabilities of earthquakes occurring within some region over time. To enable informed decision-making of civil protection, governmental agencies, or the public, Operational Earthquake Forecasting (OEF) systems aim to provide authoritative earthquake forecasts based on current earthquake activity in near-real time. Establishing OEF systems involves several nontrivial choices. This review captures the current state of OEF worldwide and analyzes expert recommendations on the development, testing, and communication of earthquake forecasts. An introductory summary of OEF-related research is followed by a description of OEF systems in Italy, New Zealand, and the United States. Combined, these two parts provide an informative and transparent snapshot of today's OEF landscape. In Section 4, we analyze the results of an expert elicitation that was conducted to seek guidance for the establishment of OEF systems. The elicitation identifies consensus and dissent on OEF issues among a non-representative group of 20 international earthquake forecasting experts. While the experts agree that communication products should be developed in collaboration with the forecast user groups, they disagree on whether forecasting models and testing methods should be user-dependent. No recommendations of strict model requirements could be elicited, but benchmark comparisons, prospective testing, reproducibility, and transparency are encouraged. Section 5 gives an outlook on the future of OEF. Besides covering recent research on earthquake forecasting model development and testing, upcoming OEF initiatives are described in the context of the expert elicitation findings.

Reviews of Geophysics

Water resources related to breccia pipe uranium mining in the Grand Canyon region

Introduction In the arid Grand Canyon region, water resources are limited to primarily the Colorado River and associated tributaries and to groundwater in the form of seeps and springs. Groundwater resources in the region supply water for human use and support diverse and rich ecosystems in the locations immediately surrounding the seeps and springs. Throughout the region, uranium resources occur and may interact with water resources in both mined and unmined uranium deposits. There is a need to better understand groundwater in the region and the effects from uranium mining in order to better manage the limited water resources in the area. This Fact Sheet summarizes results from U.S. Geological Survey studies that were conducted on this topic from 2012 to 2023.

Arizona

Seismic moment and local magnitude scales in Ridgecrest, CA from the SCEC/USGS Community Stress Drop Validation Study

We illustrate the systematic difference between moment magnitude and local magnitude caused by underlying earthquake source physics, using seismic moments submitted to the Statewide California Earthquake Center/United States Geological Survey Community Stress Drop Validation Study 2019 Ridgecrest data set. While the relationship between seismic moment and moment magnitude ( M or M w ) of log 10 ( M 0 ) ~ 1.5* M is uniformly valid for all earthquake sizes by definition (Hanks and Kanamori, 1979), the relationship between local magnitude M L and moment is itself magnitude dependent. For moderate events, ~3< M < ~6, M and M L are coincident; for earthquakes smaller than ~3, M L ~ 1.0 log 10 M 0 (Hanks and Boore, 1984). This is a physical consequence of the corner frequency fc becoming larger than the upper frequency of observation and implies that M L and M differ systematically by a factor of 1.5 for these small events. While this idea is not new, we propose a new, continuous relationship between local magnitude and moment, for magnitudes 2 to 6 which extrapolates to smaller and larger magnitudes, applicable to southern California specific to the Ridgecrest region. We make use of the plethora of seismic moments as submitted by many participants of the Community Stress Drop study, compared to the Southern California Seismic Network (SCSN) catalog magnitudes. Overall, the seismic moments in the Community Study recover moment magnitude well, so we use our new M L - M 0 to convert M L to M , refining the SCSN operational M Lr scale. This systematic difference of 50% in slope between local and moment magnitude at small magnitudes has implications for spectral stress drop estimates, earthquake ground motion modeling, as well as other magnitude scales and earthquake occurrence statistics.

California

Deep subsurface organic-rich shale supports abundant, diverse, and novel fungi

As Earth’s principal reservoir of organic carbon and microbial biomass, the deep subsurface hosts microorganisms capable of mobilizing this once-sequestered carbon. Contrary to standard assumptions of eukaryotic scarcity, this study documents abundant fungal communities, ranging from 4.2 × 10 3 to 6.8 × 10 3 fungal cells mL −1 , across a methane-producing organic-rich shale 247–556 meters below the surface. Although fungal:bacterial cell ratios ranged from 1:7028 to 1:713, application of biomass conversion factors developed for oceanic systems yielded a median fungal:bacterial biomass ratio of 1:4.7. 16S rRNA gene amplicons revealed bacterial and archaeal communities mirroring those found in well-characterized extremophilic, carbon-degrading environments, while sequencing of 18S rRNA gene and ITS rRNA spacer amplicons collectively identified a eukaryotic hotspot with 689 fungal OTUs across six phyla. The dominant fungal classes, Agaricomycetes and Dothideomycetes, are well-established degraders of recalcitrant carbon compounds at the surface, suggesting they may similarly contribute to organic matter degradation and ecosystem maintenance in the subsurface. Cultivation and isolation efforts yielded 205 fungal strains, including 13 candidate novel taxa, underscoring the deep subsurface as an underexplored eukaryotic habitat. Stable carbon isotopes indicate methane is predominantly generated via microbial conversion of the fossil carbon, while water isotopes suggest in situ geochemical conditions have been relatively stable since the Late Pleistocene, with subglacial recharge as a plausible mechanism for microbial introduction. Collectively, these findings suggest that fungi are underrecognized contributors to organic matter transformation and functional diversity in the deep biosphere, revealing a critical gap in our understanding of deep subsurface ecosystem processes.

Indiana, Michigan, Ohio

Recent scientific contributions by the U.S. Geological Survey in the San Francisco Bay and Sacramento–San Joaquin Delta Estuary

Introduction The San Francisco Bay and Sacramento–San Joaquin Delta Estuary (hereafter, Bay-Delta) is the largest estuary on the West Coast of the United States. The Bay-Delta covers more than 1,600 square miles and drains a watershed of more than 75,000 square miles, which is greater than 40 percent of California. The region surrounding the Bay-Delta is home to about 10 million people, and its habitats (fig. 1) support more than 800 plant and animal species. The waterways of the Bay-Delta are the central hub of California’s extensive freshwater delivery system, supplying water to more than 27 million Californians and 4 million acres of farmland in the Central Valley. The U.S. Geological Survey (USGS) is the primary science agency of the U.S. Department of the Interior, providing a broad range of Earth, water, biological, and mapping data and expertise to inform natural resource management across the country. This fact sheet focuses on research conducted by the USGS in the Bay-Delta region, mostly within the past 5 years. The fact sheet is organized across five major themes: water flow and water quality, fish and wildlife, wetland restoration, invasive species, and hazards. In each of these areas, the USGS works closely with Federal, State, and local agencies; academia; and non-governmental organizations to provide objective, evidence-based science. The data and knowledge gained from USGS research and monitoring are publicly available and are routinely used by agencies, including the U.S. Bureau of Reclamation, U.S. Army Corps of Engineers, U.S. Fish and Wildlife Service, California Department of Water Resources, California Department of Fish and Wildlife, California State Water Resources Control Board, Delta Stewardship Council, and many additional organizations and stakeholders to inform management of the Bay-Delta region and its resources.

California

Debris-flow entrainment modelling under climate change: Considering antecedent moisture conditions along the flow path

Debris-flow volumes can increase along their flow path by entraining sediment stored in the channel bed and banks, thus also increasing hazard potential. Theoretical considerations, laboratory experiments and field investigations all indicate that the saturation conditions of the sediment along the flow path can greatly influence the amount of sediment entrained. However, this process is usually not considered for practical applications. This study aims to close this gap by combining runout and hydrological models into a predictive framework that is calibrated and tested using unique observations of sediment erosion and debris-flow properties available at a Swiss debris-flow observation station (Illgraben). To this end, hourly water input to the erodible channel is predicted using a simple, process-based hydrological model, and the resulting water saturation level in the upper sediment layer of the channel is modelled based on a Hortonian infiltration concept. Debris-flow entrainment is then predicted using the RAMMS debris-flow runout model. We find a strong correlation between the modelled saturation level of the sediment on the flow path and the channel-bed erodibility for single-surge debris-flow events with distinct fronts, indicating that the modelled water content is a good predictor for erosion simulated in RAMMS. Debris-flow properties with more complex flow behaviour (e.g., multiple surges or roll waves) are not as well predicted using this procedure, indicating that more physically complete models are necessary. Finally, we demonstrate how this modelling framework can be used for climate change impact assessment and show that earlier snowmelt may shift the peak of the debris-flow season to earlier in the year. Our novel modelling framework provides a plausible approach to reproduce saturation-dependent entrainment and thus better constrain event volumes for current and future hazard assessment.

Illgraben basin

Site response models based on geometric parameters for southern California sedimentary basins

Site response in sedimentary basins is influenced by complex three-dimensional (3D) features, including trapping of seismic waves, focusing of seismic energy and basin resonance. Current ground motion models (GMMs) incorporate basin effects using one-dimensional parameters like V S30 and shear wave velocity isosurface depths, which are limited in capturing lateral and 3D effects. To address these limitations, we develop seismic site response models based on novel parameters that represent multi-dimensional properties of the Los Angeles Basin (LAB) geometry and shear wave velocity. We define a basin shape for the LAB using depth to subsurface geologic interfaces associated with the oldest sedimentary deposits (depth to a particular shear wave velocity horizon, i.e., 1.5 km/s - z 1.5 ) and the depth to the crystalline basement ( z cb ) which are determined using geologic cross sections and community seismic velocity model profiles. We explore a suite of geometric descriptors computed for the LAB and southern California, from which three parameters with the greatest predictive potential are selected and evaluated using empirical ground motion residual analyses in combination with the Boore et al. GMM. The results demonstrate that the zonal heterogeneity index ( ), standard deviation of the absolute difference between z 1.5 and z cb ( ) and standard deviation of z cb ( ) each provide a reduction in site-to-site variability ( ϕ S2S ) of empirical GMMs. The reduction in ϕ S2S is period-dependent, with average decreases of 3%, 26% and 6% for , , and , respectively. Although these reductions are modest from an engineering application perspective, they are statistically significant, underscoring the inherent difficulty in fully characterising complex basin effects. Collectively, these findings indicate that the inclusion of basin-specific geometric parameters yields measurable, albeit incremental, improvements in site response prediction and establishes a framework for the progressive refinement of seismic hazard characterisation within sedimentary basins.

California

A global assessment of SAOCOM-1 L-band stripmap data for InSAR characterization of volcanic, tectonic, cryospheric, and anthropogenic deformation

SAOCOM-1 is an L-band (23.5 cm) synthetic aperture radar (SAR) constellation made up of two satellites launched in 2018 and 2020 by Comisión Nacional de Actividades Espaciales (CONAE, Argentina). In this contribution, we present a global summary of interferometric SAR (InSAR) observations of ground deformation with SAOCOM-1 stripmap data for tracking volcanic, tectonic, glacier, and anthropogenic deformation. These examples include: 1) episodes of unrest at volcanoes in the Aleutian Islands, Southern Andes, and Italy, with line-of-sight (LOS) deformation from 4 cm/yr in InSAR time series to ~70 cm in interferograms; 2) dike intrusions in Hawai’i; 3) earthquakes in the Andean fold and thrust belt and the East Anatolian fault; 4) ice flow of the Southern Patagonia icefield; and 5) subsidence due to lithium brine extraction in the Salar de Atacama basin (northern Chile). Comparisons between SAOCOM-1, ALOS-2 SM3, Sentinel-1, and TerraSAR-X/ TanDEM-X/PAZ (TSX/TDX/PAZ) mean velocities from InSAR time series show a 1:1 ± 3% correlation in the LOS velocity, which highlights the high accuracy of SAOCOM-1 data. The minimum deformation that we measured in individual interferograms is 4 ± 0.6 cm. One limitation of SAOCOM-1 is the lack of a global acquisition program, which reduces its global and broader applications. Considering the repeat periods, background observation program, and lack of a controlled orbital tube, the best suited targets for SAOCOM-1 InSAR are two. First, volcanoes that deform with secular rates located in vegetated regions in mid- and high-latitudes, and/or that undergo transient episodes of fast deformation in which C-band coherence is lost quickly. Second, glaciers where coherence can be sustained during the repeat period of eight days.

IEEE Transactions on Geoscience and Remote Sensing

Treatability study to evaluate bioremediation of trichloroethene at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, 2020–22

Executive Summary Chlorinated solvents, including trichloroethene (TCE) and other chlorinated volatile organic compounds (cVOCs), are widespread contaminants that can be treated by bioremediation approaches that enhance anaerobic reductive dechlorination. Reductive dechlorination can be enhanced either through the addition of an electron donor (biostimulation) or the addition of a known dechlorinating culture (bioaugmentation) along with an electron donor. Although bioremediation has been applied at many TCE-contaminated groundwater sites, application in source zones at sites where residual dense nonaqueous phase liquid (DNAPL) is present is more limited. In this study, laboratory and field treatability tests were completed to evaluate the potential application of anaerobic bioremediation for a shallow groundwater plume containing TCE in a perched alluvial aquifer at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, which was on the National Priorities List as the New Brighton/Arden Hills Superfund site until 2019. In addition to the presence of residual DNAPL at the site, temporal variability in groundwater flow directions and input of oxygenated recharge were possible complicating factors for the application of enhanced anaerobic biodegradation in the shallow plume. The Site K plume extends beneath the footprint of Building 103, which was demolished in 2006, and soil excavations to a maximum depth of 6 feet (ft) below ground surface in 2014 were known to leave some deeper contaminated soil in place in the TCE source area. Groundwater treatment at the site, formalized as part of the 1997 Record of Decision, has been in operation since 1986 and consists of an extraction trench at the downgradient edge of the plume to collect groundwater, which is then pumped to an on-site air stripper. Groundwater concentrations in the plume have been relatively stable since treatment began, indicating a continued source of TCE in the aquifer. The desire for a destructive remedy that would enhance the removal of cVOCs in the aquifer at Site K and shorten the remediation timeframe led the U.S. Army to request that the U.S. Geological Survey conduct a groundwater treatability study to assess bioremediation. This report describes the U.S. Geological Survey bioremediation treatability study conducted during 2020–22, including pre-design site characterization to assist in formulating the bioremediation approach, laboratory experiments to support the design of the field pilot test, and implementation and 1-year performance monitoring results for the pilot test. Pre-design site characterization included the collection of soil cores for cVOC analysis and lithologic descriptions and the re-installment of three wells to obtain hydrologic measurements and initial groundwater chemistry. Relatively flat head gradients were measured at the site, and substantial decreases in water-level elevations occurred from spring to summer (May–July 2021). Continuous water-level monitoring indicated a rapid response to precipitation. Groundwater flow velocities were consistently less than 0.5 foot per day, and the pilot bioremediation test was therefore designed with short lateral distances (about 5 ft) between injection and individual monitoring points. Soil analyses confirmed that high volatile organic compound contamination was left in place in the source area. The highest concentrations were near or in clay at the base of the perched aquifer. Concentrations of cVOCs measured in the replaced wells were consistent with historical data and had a maximum TCE concentration of 57,700 micrograms per liter (μg/L), indicative of nearby residual DNAPL based on the general rule of observed concentrations exceeding 1 percent of solubility. The primary TCE daughter product detected was 1,2-cis-dichloroethene (cisDCE), which indicated limited reductive dechlorination in the plume. Groundwater in both the source and downgradient areas was relatively reducing during the pre-design characterization, particularly in the source area where methane concentrations greater than 400 μg/L were measured. Initial laboratory tests conducted using native aquifer microorganisms from the three replacement wells showed that anaerobic TCE biodegradation rates were low when biostimulated with the addition of sodium lactate as an electron donor, also known as a carbon donor, and resulted in the production of only cisDCE. Addition of a known dechlorinating culture, WBC-2, however, resulted in rapid biodegradation and production of ethene, verifying complete reductive dechlorination of TCE. Microcosms constructed with aquifer soil collected from the site were used to evaluate other electron donors besides lactate to support reductive dechlorination by WBC-2, including corn syrup as an alternative fast-release compound and whey, soy-based vegetable oil, and 3-D Microemulsion (Regenesis, San Clemente, California) as slow-release compounds. First-order rate constants for total organic chlorine removal in these WBC-2 amended microcosms were greatest with either lactate or vegetable oil as the donor, ranging between 0.061 and 0.047 per day or corresponding half-lives of 11–15 days. Testing of commercial products in other WBC-2-bioaugmented microcosms led to selection for the field pilot test of an emulsified vegetable oil product that also contained some sodium lactate as a fast-release donor. Delaying the addition of WBC-2 relative to the donor in the microcosms resulted in the most rapid overall biodegradation rates. The selected design for the pilot test utilized three separate test plots, each about 30-ft wide and 60-ft long: plots GS1 and GS2 in the source area of the plume and plot GS3 in the downgradient area of the plume near the excavation trench. Each test plot had one injection well, one monitoring well upgradient from the injection point, and 12 surrounding monitoring wells in a grid to capture variable groundwater flow directions. Donor injections, which included a bromide tracer, were completed in October 2021, immediately following baseline sampling, and the WBC-2 culture was injected about 40 days later, between November 30 and December 2, 2021. Performance monitoring conducted until December 2022 included hydrologic measurements and analyses of cVOCs, redox-sensitive constituents, dissolved organic carbon, bromide, volatile fatty acids, compound-specific carbon isotopes, and microbial communities. The biogeochemical data collected during the pilot tests in the three treatment plots showed that enhanced, complete reductive dechlorination of cVOCs in the groundwater was achieved in the GS1 and GS3 plots. In contrast, evidence of distribution of the injected amendments and subsequent biodegradation was limited in GS2, which was in an area of more heterogeneous soil lithology and low water table elevations. The molar composition of volatile organic compounds in the GS1 and GS3 plots was dominated by ethene in wells that were reached by the injected amendments by the end of the monitoring period. In the GS1 and GS3 plots, similar patterns were observed of cVOC concentrations decreasing to near detection levels, or below, at some wells sampled in July and October 2022, whereas ethene became dominant and indicated sustained complete reductive dechlorination. Baseline cVOC concentrations were more than a factor of 10 higher in the groundwater in the GS1 plot than in GS3, but no apparent inhibition of complete dechlorination occurred. As expected from the initial pre-design site data and the laboratory experiments, enhanced dissolution of residual DNAPL coupled to biodegradation was evident in the GS1 plot, where a marked increase in dichloroethene (DCE) above the initial baseline and upgradient TCE and DCE concentrations occurred. DCE concentrations subsequently declined where DNAPL dissolution was evident, concurrent with production of vinyl chloride and then predominantly ethene. Thus, overall biodegradation rates outpaced the DNAPL dissolution and desorption and DCE production in the source area. This success in complete degradation to predominantly ethene was achieved even in areas where the DCE concentrations reached a maximum of about 30,000 μg/L. Compound specific isotope analysis of carbon in TCE, cisDCE, trans-1,2-dichloroethene, and vinyl chloride was conducted to provide another line of evidence of the occurrence and extent of anaerobic biodegradation. Along a flow path in each plot that was affected by the injected amendments, carbon isotopes in the TCE and daughter cVOCs in the groundwater became isotopically heavier, indicating biodegradation. Enhanced biodegradation rates calculated from the field tests in GS1 and GS3 showed half-lives of 36.9–75.3 days for DCE degradation and 9.48–38.5 days for ethene production. Notably, these ethene production rates calculated from the field tests are consistent with the results of WBC-2-bioaugmented microcosms amended with either lactate or vegetable oil, which had half-lives for total organic chlorine removal that ranged from 11 to 15 days. These rates indicated rapid enhanced biodegradation, which is promising for application of a full-scale bioremediation remedy. Ultimately, however, the mass of residual or sorbed TCE in the aquifer that remains accessible for dissolution and biodegradation would likely control the time required for a full-scale bioremediation effort to achieve performance goals for TCE and cisDCE specified in the Record of Decision for Site K. The field pilot tests showed that the relatively low hydraulic head gradients and temporal changes in groundwater flow directions in the shallow aquifer would add complexity to a full-scale bioremediation effort. The radius of influence (ROI) at GS1 and GS3 (16.3 ft and 12.7 ft, respectively) were close to the design ROI of 15 ft. The estimated ROI at GS2 was about four times the design ROI, but may be less reliable at this location owing to groundwater flow direction. In addition, the low temperatures following WBC-2 injection in late November to early December 2021, in combination with the low hydraulic head gradients, were probably major factors in the delay observed before the onset of enhanced biodegradation following injection of the culture. Additional test injections could be beneficial to optimize the timing of donor and culture injections with the variable temperatures and hydraulic head in the shallow aquifer.

Minnesota

The 3D Elevation Program—Supporting the economy of Massachusetts

Introduction Massachusetts extends from the mountains of the Appalachian system in the west of the State to the sandy beaches and rocky shorelines of the Atlantic coast in the east. Inland topographic data support a wide range of important activities, including geologic mapping, transportation planning, forest and wildlife management, quantifying ecological services, water supply protection, commonwealth-wide infrastructure planning, local site planning, and flood-plain management. Nearshore bathymetry can be used to support coastal portions of the Commonwealth by addressing the combined threats of ocean warming, strong storm surge, and rising sea levels. The maintenance and (or) expansion of Massachusetts ports (for instance, Boston, New Bedford) and Cape Cod sediment management depends upon the accurate mapping of bathymetry and the frequent influx of sediment and redeposition. Critical applications that address the broad range of requirements depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Massachusetts. The status of available and in-progress 3DEP baseline lidar data in Massachusetts is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $1.23 million in new benefits annually to Massachusetts. The top 10 Massachusetts business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Massachusetts

Simulation-based scenario ShakeMaps for large magnitude (MW6.5+) crustal earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults, Washington, USA

Scenario ground‐motion maps based on empirical ground‐motion models (GMMs) provide a rapid and generally reliable means of estimating the amplitude and distribution of earthquake shaking. However, because GMMs are designed for broad applicability, they often rely on simplified representations of Earth structure, which can limit their accuracy in regions with complex source, path, and site effects. This can substantially impact the accuracy of predicted shaking in areas like western Washington State, where deep, interconnected basin structure exerts a strong influence on seismic‐wave propagation. In this study, we present a new suite of simulation‐based scenario ShakeMaps that characterize ground shaking from large‐magnitude ( ⁠ M W 6.5–7.5) earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults. These maps are developed using results from recent 3D wave propagation simulations ( Stone et al. , 2022 , 2023 , 2025 ) that incorporate realistic rupture geometries, variable slip distributions, and a regional 3D seismic velocity model with shallow soils. Broadband ground motions are estimated by combining the low‐frequency (<1 Hz) deterministic seismograms from these studies with high‐frequency (1–10 Hz) stochastic seismograms. Simulated ground motions are corrected to account for the enforced minimum shear‐wave velocity and nonlinear site response. The resulting ShakeMaps represent median ground‐shaking estimates derived from multiple rupture scenarios with varying slip distributions and hypocenter locations for each fault. To extend ShakeMap coverage beyond the simulation domain (i.e., into eastern Washington, northern Oregon, and southwestern British Columbia), we scale GMM‐based ground‐motion estimates using amplification patterns observed in the simulations. These new ShakeMaps reveal the substantial influence of deep basin structure on shaking intensity, underscoring the importance of considering crustal structure complexity in regional hazard assessments for the Pacific Northwest.

Washington

New York and Landsat

From the iconic skyline of New York City to the forested landscapes of the Adirondack Mountains and the countryside of the Allegheny Plateau, the State of New York is overflowing with diversity and life. Bordered by the Atlantic Ocean on the east and two of the Great Lakes to the north and west, New York has more than 7,600 lakes, ponds, and reservoirs and more than 70,000 miles of rivers and streams. New York’s stewardship of its freshwater resources is fundamental to the health and well-being of all who work at, reside in, and visit the State’s landmarks and places. Harmful algal blooms in the State’s waterbodies are a growing concern and threaten the health of the region and its inhabitants. Images and data from Landsat satellites continue to provide critical information to scientists, public health officials, and resource managers who are studying the effects and risks of the problem.

New York

Hydrogeology of stratified drift in Farmington, Connecticut: Available data and future needs

The purpose of this report is twofold. The first is to update hydrogeologic information on the major stratified-drift deposits that underlie much of Farmington. The second is to outline data requirements for future ground-water evaluation and management. The scope of the report is limited to the stratified drift, as it is the only aquifer capable of sustaining large withdrawals for public or industrial supply. This aquifer is composed of interbedded layers of gravel, sand, silt and clay. Most of this material was deposited by glacial meltwaters, but locally the aquifer contains some unconsolidated deposits of nonglacial origin. The most extensive stratified-drift deposits are in the valleys of the Farmington and Pequabuck Rivers.(See plate B.) A few small areas of stratified drift near East Farmington Heights and Oakland Gardens are not discussed in this report as their potential for large-scale development is slight.

Connecticut

Generalized potentiometric maps of the Fort Union, Hell Creek, and Fox Hills aquifers within the Standing Rock Reservation

Generalized potentiometric surfaces of the Fort Union, Hell Creek, and Fox Hills aquifers were constructed to assess the groundwater resources of the Standing Rock Reservation. Additionally, this information can provide water managers with tools and data to effectively manage water resources in the future. Previous studies that mapped the geology and hydrogeology of the area at differing scales were used to confirm in which aquifer the study wells were completed. Water-level data from wells are provided by the U.S. Geological Survey Groundwater System Inventory database, the South Dakota Department of Agriculture and Natural Resources, and the North Dakota Department of Water Resources. Hydrographs were constructed for five selected observation wells to evaluate historical water-level fluctuations and trends. Hydrographs for the Hell Creek aquifer showed a flat trend with a rise in 2020. Hydrographs for the deeper Fox Hills aquifer showed that water levels fluctuated in response to climatic conditions and demonstrated an increasing trend in water-level elevations starting in 2010. Hydrographs were not constructed for any wells completed in the Fort Union Formation because none of the wells had continuous long-term measurements. Generalized potentiometric surfaces, constructed from interpolating water-level elevations, gave insight into groundwater flow directions. Groundwater in the Fort Union aquifer likely flows radially outward from the northwest part of the study area to the northeast and south-southeast parts. Groundwater in the Hell Creek aquifer generally flows from higher elevations in the northwest towards lower areas, where surface-water tributaries have incised into the aquifer. Groundwater in the Fox Hills aquifer likely flows from higher elevations in the west, southwest, and central parts of the study area towards the valleys of the Grand River and Missouri River. Most wells used for constructing potentiometric maps had only one recorded water-level measurement from drillers at the time of well construction. These measurements are often subject to error because the well is still recovering and because of spatial limitations of data availability. Also, because single water-level measurements were recorded at different points in time, additional uncertainty is introduced by fluctuating climatic conditions effect on water levels. Potentiometric map interpretation limitations are a result of areas with sparse data. Limitations also arise from potentiometric surfaces generalizing a complex and dynamic hydrogeologic system; however, the generalized potentiometric surface maps can be used to assist water managers and can help prioritize locations for future monitoring in areas with high uncertainty from sparse existing data.

North Dakota, South Dakota

Regional models for postfire debris-flow likelihood and rainfall thresholds across the western United States

The U.S. Geological Survey (USGS) uses an empirical model developed with logistic regression (the ‘M1’ model) to rapidly assess debris-flow likelihood and to identify quantitative rainfall thresholds for debris flows after wildfire in the western United States. The M1 model was calibrated to a debris-flow inventory from southern California (United States) and has been applied throughout the western United States. Limited spatial coverage in the calibration dataset has motivated evaluation of M1 model accuracy outside the calibration region (e.g., the Sierra Nevada or the eastern Cascade Range, United States). Previous test cases showed that M1 overpredicts debris-flow likelihood and underpredicts rainfall thresholds for some locations (e.g., Arizona, northern California, Colorado, New Mexico, United States). We sought to improve the regional applicability of a debris-flow likelihood model by expanding the debris-flow inventory used for calibration, testing multiple potential models and generating an updated model framework. The updated inventory includes 3788 observations from 67 burned areas paired with short duration rainfall ratios. The updated model framework consists of a modified model structure and sets of coefficients calibrated separately to the entire updated inventory and to subsets of the inventory that intersect three Environmental Protection Agency (EPA) Level 2 ecoregions (Mediterranean California, Upper Gila Mountains and Western Cordillera). Comparisons of predictions from the updated models with observed rainfall and debris-flow activity show that the updated models outperform the M1 model by ~15%–60% and improve the uniformity of predictive performance across the western United States. The updated models also reduce false positive rates relative to M1 and generate rainfall thresholds that are better aligned with relative differences in regional climatology and debris-flow activity.

Arizona, California, Colorado, Idaho, Montana, Nev

Spatio-temporal modeling for assessing geoenergy resources: A workflow applied to gas in place variation in coal beds

The ability to estimate spatio-temporal changes in hydrocarbon reservoir properties and energy resources within pore volumes is essential for optimizing production, reservoir management, geologic energy storage, and safety in underground mining operations. In coal seams, predicting remaining methane gas-in-place (GIP) is critical for quantifying producible gas and improving mine safety and productivity through effective ventilation planning. Although such changes are commonly evaluated using physics-based numerical simulation models, these approaches often require extensive data, calibration effort, and time. This study presents a spatio-temporal geostatistical modeling approach that bridges the gap between purely spatial models and full numerical simulations. The method is applied to a case study of coal seam degasification in the Mary Lee coal group, Black Warrior Basin, Alabama, USA, to estimate GIP evolution over time within a selected mining district. The analysis uses published data from prior natural gas production history-matching of degasification using vertical wells. Empirical spatial and temporal statistics were calculated for reservoir pressure and water saturation, and spatio-temporal variogram models were fitted to experimental variograms. These models provided the structural basis for spatio-temporal kriging, integrated with spatial estimates of time-invariant parameters (porosity, density, and thickness) to estimate GIP. This approach enabled estimation of GIP changes over time, including periods without data. Boxplots of GIP estimates indicated systematic depletion and decreasing spatial variability, reflecting the impacts of degasification. Comparison with cumulative gas production from empirical well records showed approximately 85% agreement based on a relative similarity metric. Spatio-temporal GIP estimates were also used to estimate methane emissions to longwall ventilation systems and compared with reported emissions from the U.S. EPA Greenhouse Gas Reporting Program, showing similar distributions (≈80%) given data limitations. Overall, this integrated modeling approach provides time-dependent GIP estimates with broader implications for resource assessment applications.

Alabama

Groundwater hydrology, groundwater and surface-water interactions, water quality, and groundwater-flow simulations for the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado, 2017–19

In 2017, the U.S. Geological Survey, in cooperation with the Upper Arkansas Water Conservancy District, began a study to provide a comprehensive analysis of the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado. The study included collection of data pertaining to groundwater hydrology, groundwater and surface-water interactions, and water quality in the alluvial aquifer. In addition to providing foundational information on the hydrology of the alluvial aquifer, a numerical groundwater-flow model was developed to estimate the potential effects of additional storage of groundwater in the alluvial aquifer. Groundwater-level elevation data from 30 wells were used to estimate groundwater-flow directions in the alluvial aquifer, which were generally from the southwest to northeast, away from the Sangre de Cristo Mountains and towards perennial streams in the center of the valley. Although some seasonal variation was apparent in groundwater-level elevation records, no statistically significant seasonal trends were indicated. Statistically significant long-term trends were indicated in groundwater-level elevation records for 8 of the 30 wells, and of these wells with statistically significant trends, all but 1 indicated a negative trend of groundwater-level elevations. Spatial evaluation of wells with statistically significant negative groundwater-level elevation trends showed many are in areas of denser well drilling for domestic or other uses, indicating increasing groundwater use could potentially be causing groundwater-level elevation declines. There were instances of wells with no statistically significant groundwater-level elevation trends also located in areas of greater density of well completions. Additional investigations may be necessary to more fully characterize the processes responsible for negative groundwater-level elevation trends. Streamflow gain or loss calculations were completed for low flow in 2017–19 and for high flow in 2018 in nine reaches of streams within the study area. Stream reaches of the upper Texas Creek, upper Grape Creek, upper-middle Grape Creek, and Taylor Creek displayed consistent streamflow loss in each period from 2017 to 2019. These stream reaches represent long-term sources of recharge to the alluvial aquifer. Streamflow gain or loss varies through time in other stream reaches (lower Texas Creek, lower-middle Grape Creek, lower Grape Creek below Westcliffe, and lower Grape Creek above DeWeese Reservoir). The temporally variable behavior indicates these stream reaches may be sources of groundwater recharge or areas of groundwater discharge, likely depending on temporal dynamics between the elevation of the water table and the stream. Water-quality samples were collected from 10 groundwater wells and 10 stream sites during September through November 2019. All groundwater and stream samples were analyzed for major and trace elements and stable isotopes of water. A subset of groundwater samples was also analyzed for the environmental tracers sulfur hexafluoride, tritium, and noble gases. Comparison of water-quality results to U.S. Environmental Protection Agency drinking water-quality standards indicated no constituents exceeded primary standards for human health. Spatial evaluation of water quality indicated the concentrations of various constituents are likely controlled by groundwater and surface-water interactions and by spatial variability in bedrock geology underlying the alluvial aquifer. Specifically, streams shown to gain from groundwater had water chemistry constituent compositions similar to groundwater, whereas streams exiting the Sangre de Cristo Mountains tended to have compositions consistent with snowmelt. Groundwater geochemistry appeared to be partially controlled by oxidation-reduction processes and by proximity to igneous rocks in the Wet Mountains. Environmental tracers used to estimate groundwater age indicated all sampled groundwater contained tracers representing modern recharge (approximately less than 65 years old) but mixing of premodern recharge (approximately more than 65 years old) also occurs. Spatial evaluation of environmental tracers indicated large faults may be conduits for upwelling of older groundwater. No trends were observed in groundwater age with well depth, indicating all sampled wells are located within the zone of active groundwater flow. The presence of modern groundwater in wells with statistically significant negative groundwater-level elevation trends indicates groundwater storage depletions may be partially offset by capture of modern recharge. Repeated sampling of groundwater age would be necessary, however, to determine if any trends in groundwater age exist, which may indicate changing groundwater recharge, storage, or discharge. Additional investigations could also consider quantifying groundwater age in deeper wells to more fully define the depth of active groundwater flow. A numerical groundwater-flow model was developed to estimate components of the water budget, simulate groundwater and surface-water interactions, and evaluate the potential effects of aquifer storage and recovery. Simulated groundwater-level elevations from the calibrated groundwater-flow model are similar to the observed pattern of groundwater-level elevations with higher elevations in the western part of the study area along the Sangre de Cristo Mountains. Simulated water-budget components indicate most of the recharge to the alluvial aquifer is derived from streamflow losses, which is consistent with observations of losing streams along the mountain front. The largest groundwater discharge component of the alluvial aquifer was to streams in the center of the valley, where observations of stream gain or loss indicated the predominance of gaining conditions. Comparison of groundwater and surface-water interactions between the calibrated groundwater-flow model for 2000-19 (the base-case model) and a simulation including additional recharge, representing potential aquifer storage and recovery operations, indicated the additional recharge distributed throughout the area had minimal effects on streamflow in the nearby Grape Creek. An analysis of subregional groundwater budgets showed approximately 54 percent of the additional recharge flowed back to nearby Grape Creek, and the other 46 percent was distributed laterally into adjacent cells in the alluvial aquifer. The comparison of simulations and subregional water budget show the additional recharge did not substantially alter groundwater-level elevations or basin wide groundwater storage. Although the analysis of additional recharge provided in the numerical groundwater-flow model considers only one of many possible recharge scenarios, the model provides a useful tool that could be modified for various scenarios to understand potential effects of managed aquifer recharge.

Colorado