SEARCH · USGS Science

Results for “Engineering Analysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources

USGS1998

Chlorofluorocarbons, sulfur hexafluoride, and dissolved permanent gases in ground water from selected sites in and near the Idaho National Engineering and Environmental Laboratory, Idaho, 1994-97

From July 1994 through May 1997, the U.S. Geological Survey in cooperation with the Department of Energy, sampled 86 wells completed in the Snake River Plain aquifer at and near the Idaho N ationa1 Engineering and Environmental Laboratory (INEEL). The wells were sampled for a variety of constituents including one- and two-carbon halocarbons. Concentrations of dichlorodifluoromethane (CFC-12), trichlorofluoromethane (CFC-11) and trichlorotrifluororoethane (CFC-113) were determined. The samples for halocarbon analysis were collected in 62-milliliter flame sealed borosilicate glass ampoules in the field. The data will be used to evaluate the ages of ground waters at INEEL. The ages of the ground water will be used to determine recharge rates, residence time, and travel time of water in the Snake River Plain aquifer in and near INEEL. The chromatograms of 139 ground waters are presented showing a large number of halomethanes, haloethanes, and haloethenes present in the ground waters underlying the INEEL. The chromatograms can be used to qualitatively evaluate a large number of contaminants at parts per trillion to parts per billion concentrations. The data can be used to study temporal and spatial distribution of contaminants in the Snake River Plain aquifer. Representative compressed chromatograms for all ground waters sampled in this study are available on two 3.5-inch high density computer disks. The data and the program required to decompress the data can be obtained from the U.S. Geological Survey office at Idaho Falls, Idaho. Sulfur hexafluoride (SF6) concentrations were measured in selected wells to determine the feasibility of using this environmental tracer as an age dating tool of ground water. Concentrations of dissolved nitrogen, argon, carbon dioxide, oxygen, and methane were measured in 79 ground waters. Concentrations of dissolved permanent gases are tabulated and will be used to evaluate the temperature of recharge of ground water in and near the INEEL.

Idaho↗

USGS2023

Techniques for estimating the magnitude and frequency of peak flows on small streams in Minnesota, excluding the Rainy River Basin, based on data through water year 2019

Annual peak-flow data collected at U.S. Geological Survey streamgages in Minnesota and adjacent areas of neighboring states of Iowa and South Dakota were analyzed to develop and update regional regression equations that can be used to estimate the magnitude and frequency of peak streamflow for ungaged streams in Minnesota, excluding the Lake of the Woods-Rainy River Basin upstream from Kenora, Ontario, Canada. Hydraulic engineers use peak-flow frequency estimates to inform designs of bridges, culverts, and dams, and water managers use the estimates for regulation and planning activities. Peak-flow estimates are provided for the 66.7-, 50-, 20-, 10-, 4-, 2-, 1-, and 0.2-percent annual exceedance probabilities (AEPs), which are equivalent to annual flood-frequency recurrence intervals of 1.5-, 2-, 5-, 10-, 25-, 50-, 100-, and 500-years, respectively. The estimates were computed by applying the expected moments algorithm to fit a Pearson Type III distribution to the logarithms of annual peak flows for 298 streamgages based on annual peak-flow data collected through water year 2019. The study area is represented by six hydrologic regions delineated on the basis of a pattern of residuals of statewide regressions, using basin characteristics such as drainage area, main-channel slope, lake area, storage area, and mean annual runoff as explanatory variables. The concept and principles of hydrologic landscape units was used to validate the regions. Residual analysis of the regional regression equations was used to subsequently develop equations relating the peak flow estimates for selected AEPs using 17 characteristics tested as explanatory variables in the regression analysis. The equations developed in this study can be used to produce AEPs within the six regions and to update equations developed in earlier, similar studies in Minnesota. Furthermore, updating the equations in StreamStats, a web-based geographic information system tool developed by the U.S. Geological Survey, will allow hydraulic engineers and water managers to obtain AEPs and basin characteristics for user-selected locations on streams through an interactive map.

Minnesota↗

USGS1977

Strong-motion earthquake accelerograms digitization and analysis records from Lima, Peru, 1951 to 1974

This is the second of a series of reports planned to include the results of digitization and routine analyses of strong-motion earthquake accelerograms published by the U.S. Geological Survey. Serving as a model for this effort is the collection of data reports published by the Earthquake Engineering Research Laboratory of the California Institute of Technology during the years 1969 - 1975 and covering the significant records of the period from 1933 up to the San Fernando earthquake of February 9, 1971. The first of the present series of reports, Open File Report No. 76-609, covered the significant records of 1971 subsequent to the San Fernando earthquake. The present report includes the results of some ongoing work on Peru records.

Open-File Report↗

USGS2009

Web-based decision support and visualization tools for water quality management in the Chesapeake Bay watershed

Federal, State, and local water quality managers charged with restoring the Chesapeake Bay ecosystem require tools to maximize the impact of their limited resources. To address this need, the U.S. Geological Survey (USGS) and the Environmental Protection Agency's Chesapeake Bay Program (CBP) are developing a suite of Web-based tools called the Chesapeake Online Assessment Support Toolkit (COAST). The goal of COAST is to help CBP partners identify geographic areas where restoration activities would have the greatest effect, select the appropriate management strategies, and improve coordination and prioritization among partners. As part of the COAST suite of tools focused on environmental restoration, a water quality management visualization component called the Nutrient Yields Mapper (NYM) tool is being developed by USGS. The NYM tool is a web application that uses watershed yield estimates from USGS SPAtially Referenced Regressions On Watershed (SPARROW) attributes model (Schwarz et al., 2006) [6] to allow water quality managers to identify important sources of nitrogen and phosphorous within the Chesapeake Bay watershed. The NYM tool utilizes new open source technologies that have become popular in geospatial web development, including components such as OpenLayers and GeoServer. This paper presents examples of water quality data analysis based on nutrient type, source, yield, and area of interest using the NYM tool for the Chesapeake Bay watershed. In addition, we describe examples of map-based techniques for identifying high and low nutrient yield areas; web map engines; and data visualization and data management techniques.

Conference Paper↗

USGS1999

Assessing environmental contaminant threats to lands and biota managed by the U.S. Fish and Wildlife Service

The Contaminant Assessment Process (CAP) is a standardized approach for documenting and assessing threats posed by environmental contaminants to lands and biota managed by the Department of the Interior (DOI). The Biomonitoring of Environmental Status and Trends (BEST) Program of the U.S. Geological Survey Biological Resources Division (USGS/BRD) developed the CAP cooperatively with the U.S. Fish and Wildlife Service's (FWS) Division of Environmental Contaminants (DEC). The CAP involves two parts, a retrospective analysis, and if needed, field-sampling. The retrospective analysis documents the ecological characteristics, management goals, areas potentially vulnerable to hazardous substance spills, and habitats of importance for the DOI land unit of interest. In addition, contaminant transport pathways and sources (point and nonpoint) are identified and potentially contaminated areas delineated. The second part of the CAP involves developing field-sampling plans to confirm the presence or effects of contaminants identified in the retrospective analysis. Field-sampling deemed necessary to confirm contaminant issues on national wildlife refuges identified through the retrospective analyses of CAP is handled as part of DECs on- and off-refuge investigation programs. By gathering and interpreting information, the CAP generates valuable insight regarding contaminant issues that may be affecting refuges. Findings from the CAP can help FWS stewards select options that reduce contaminant impacts on the habitats and species that they manage. Information synthesized through the CAP also contributes to the development of Comprehensive Conservation Plans mandated through the National Wildlife Refuge System Improvement Act of 1997. To insure that this information has the maximum benefit to the agency, DEC and the BEST Program jointly developed a data management system to support the CAP. This system facilitates information acquisition from remote sources and serves as a permanent data repository. Thus, the system documents CAP findings, enhances FWS's institutional memory, and supports informed management decisions. This document is a user's guide, intended for use by FWS field biologists responsible for applying the retrospective analysis portion of the CAP to FWS national wildlife refuge lands and provides instructions for entering information into the data management system. This is the third revision of the original document written in 1993 by scientists of the Idaho National Engineering and Environmental Laboratory.

Open-File Report↗

USGS2014

Virtual Beach 3: user's guide

Virtual Beach version 3 (VB 3 ) is a decision support tool that constructs site-specific statistical models to predict fecal indicator bacteria (FIB) concentrations at recreational beaches. VB 3 is primarily designed for beach managers responsible for making decisions regarding beach closures or the issuance of swimming advisories due to pathogen contamination. However, researchers, scientists, engineers, and students interested in studying relationships between water quality indicators and ambient environmental conditions will find VB 3 useful. VB 3 reads input data from a text file or Excel document, assists the user in preparing the data for analysis, enables automated model selection using a wide array of possible model evaluation criteria, and provides predictions using a chosen model parameterized with new data. With an integrated mapping component to determine the geographic orientation of the beach, the software can automatically decompose wind/current/wave speed and magnitude information into along-shore and onshore/offshore components for use in subsequent analyses. Data can be examined using simple scatter plots to evaluate relationships between the response and independent variables (IVs). VB 3 can produce interaction terms between the primary IVs, and it can also test an array of transformations to maximize the linearity of the relationship The software includes search routines for finding the "best" models from an array of possible choices. Automated censoring of statistical models with highly correlated IVs occurs during the selection process. Models can be constructed either using previously collected data or forecasted environmental information. VB 3 has residual diagnostics for regression models, including automated outlier identification and removal using DFFITs or Cook's Distances.

Report↗

USGS2009

Implementation of the SSHAC Guidelines for Level 3 and 4 PSHAs - Experience gained from actual applications

In April 1997, after four years of deliberations, the Senior Seismic Hazard Analysis Committee released its report 'Recommendations for Probabilistic Seismic Hazard Analysis: Guidance on Uncertainty and Use of Experts' through the U.S. Nuclear Regulatory Commission as NUREG/CR-6372, hereafter SSHAC (1997). Known informally ever since as the 'SSHAC Guidelines', SSHAC (1997) addresses why and how multiple expert opinions - and the intrinsic uncertainties that attend them - should be used in Probabilistic Seismic Hazard Analyses (PSHA) for critical facilities such as commercial nuclear power plants. Ten years later, in September 2007, the U.S. Geological Survey (USGS) entered into a 13-month agreement with the U.S. Nuclear Regulatory Commission (NRC) titled 'Practical Procedures for Implementation of the SSHAC Guidelines and for Updating PSHAs'. The NRC was interested in understanding and documenting lessons learned from recent PSHAs conducted at the higher SSHAC Levels (3 and 4) and in gaining input from the seismic community for updating PSHAs as new information became available. This study increased in importance in anticipation of new applications for nuclear power facilities at both existing and new sites. The intent of this project was not to replace the SSHAC Guidelines but to supplement them with the experience gained from putting the SSHAC Guidelines to work in practical applications. During the course of this project, we also learned that updating PSHAs for existing nuclear power facilities involves very different issues from the implementation of the SSHAC Guidelines for new facilities. As such, we report our findings and recommendations from this study in two separate documents, this being the first. The SSHAC Guidelines were written without regard to whether the PSHAs to which they would be applied were site-specific or regional in scope. Most of the experience gained to date from high-level SSHAC studies has been for site-specific cases, although three ongoing (as of this writing) studies are regional in scope. Updating existing PSHAs will depend more critically on the differences between site-specific and regional studies, and we will also address these differences in more detail in the companion report. Most of what we report here and in the second report on updating PSHAs emanates from three workshops held by the USGS at their Menlo Park facility: 'Lessons Learned from SSHAC Level 3 and 4 PSHAs' on January 30-31, 2008; 'Updates to Existing PSHAs' on May 6-7, 2008; and 'Draft Recommendations, SSHAC Implementation Guidance' on June 4-5, 2009. These workshops were attended by approximately 40 scientists and engineers familiar with hazard studies for nuclear facilities. This company included four of the authors of SSHAC (1997) and four other experts whose contributions to this document are mentioned in the Acknowledgments section; numerous scientists and engineers who in one role or another have participated in one or more high-level SSHAC PSHAs summarized later in this report; and representatives of the nuclear industry, the consulting world, the regulatory community, and academia with a keen interest and expertise in hazard analysis. This report is a community-based set of recommendations to NRC for improved practical procedures for implementation of the SSHAC Guidelines. In an early publication specifically addressing the SSHAC Guidelines, Hanks (1997) noted that the SSHAC Guidelines were likely to evolve for some time to come, and this remains true today. While the broad philosophical and theoretical dimensions of the SSHAC Guidelines will not change, much has been learned during the past decade from various applications of the SSHAC Guidelines to real PSHAs in terms of how they are implemented. We anticipate that, in their practical applications, the SSHAC Guidelines will continue to evolve as more experience is gained from future SSHAC applications. Indeed, to the extent that every PSHA has its

Open-File Report↗

USGS2002

Comparing shear-wave velocity profiles inverted from multichannel surface wave with borehole measurements

Recent field tests illustrate the accuracy and consistency of calculating near-surface shear (S)-wave velocities using multichannel analysis of surface waves (MASW). S-wave velocity profiles (S-wave velocity vs. depth) derived from MASW compared favorably to direct borehole measurements at sites in Kansas, British Columbia, and Wyoming. Effects of changing the total number of recording channels, sampling interval, source offset, and receiver spacing on the inverted S-wave velocity were studied at a test site in Lawrence, Kansas. On the average, the difference between MASW calculated Vs and borehole measured Vs in eight wells along the Fraser River in Vancouver, Canada was less than 15%. One of the eight wells was a blind test well with the calculated overall difference between MASW and borehole measurements less than 9%. No systematic differences were observed in derived Vs values from any of the eight test sites. Surface wave analysis performed on surface data from Wyoming provided S-wave velocities in near-surface materials. Velocity profiles from MASW were confirmed by measurements based on suspension log analysis. ?? 2002 Elsevier Science Ltd. All rights reserved.

Soil Dynamics and Earthquake Engineering↗

USGS2011

Regional skew for California, and flood frequency for selected sites in the Sacramento-San Joaquin River Basin, based on data through water year 2006

Improved flood-frequency information is important throughout California in general and in the Sacramento-San Joaquin River Basin in particular, because of an extensive network of flood-control levees and the risk of catastrophic flooding. A key first step in updating flood-frequency information is determining regional skew. A Bayesian generalized least squares (GLS) regression method was used to derive a regional-skew model based on annual peak-discharge data for 158 long-term (30 or more years of record) stations throughout most of California. The desert areas in southeastern California had too few long-term stations to reliably determine regional skew for that hydrologically distinct region; therefore, the desert areas were excluded from the regional skew analysis for California. Of the 158 long-term stations used to determine regional skew, 145 have minimally regulated annual-peak discharges, and 13 stations are dam sites for which unregulated peak discharges were estimated from unregulated daily maximum discharge data furnished by the U.S. Army Corp of Engineers. Station skew was determined by using an expected moments algorithm (EMA) program for fitting the Pearson Type 3 flood-frequency distribution to the logarithms of annual peak-discharge data. The Bayesian GLS regression method previously developed was modified because of the large cross correlations among concurrent recorded peak discharges in California and the use of censored data and historical flood information with the new expected moments algorithm. In particular, to properly account for these cross-correlation problems and develop a suitable regression model and regression diagnostics, a combination of Bayesian weighted least squares and generalized least squares regression was adopted. This new methodology identified a nonlinear function relating regional skew to mean basin elevation. The regional skew values ranged from -0.62 for a mean basin elevation of zero to 0.61 for a mean basin elevation of 11,000 feet. This relation between skew and elevation reflects the interaction of snow with rain, which increases with increased elevation. The equivalent record length for the new regional skew ranges from 52 to 65 years of record, depending upon mean basin elevation. The old regional skew map in Bulletin 17B, published by the Hydrology Subcommittee of the Interagency Advisory Committee on Water Data (1982), reported an equivalent record length of only 17 years. The newly developed regional skew relation for California was used to update flood frequency for the 158 sites used in the regional skew analysis as well as 206 selected sites in the Sacramento-San Joaquin River Basin. For these sites, annual-peak discharges having recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years were determined on the basis of data through water year 2006. The expected moments algorithm was used for determining the magnitude and frequency of floods at gaged sites by using regional skew values and using the basic approach outlined in Bulletin

Scientific Investigations Report↗

USGS2016

Particle size distribution of main-channel-bed sediments along the upper Mississippi River, USA

In this study, we compared pre-lock-and-dam (ca. 1925) with a modern longitudinal survey of main-channel-bed sediments along a 740-km segment of the upper Mississippi River (UMR) between Davenport, IA, and Cairo, IL. This comparison was undertaken to gain a better understanding of how bed sediments are distributed longitudinally and to assess change since the completion of the UMR lock and dam navigation system and Missouri River dams (i.e., mid-twentieth century). The comparison of the historic and modern longitudinal bed sediment surveys showed similar bed sediment sizes and distributions along the study segment with the majority (> 90%) of bed sediment samples having a median diameter ( D 50 ) of fine to coarse sand. The fine tail (≤ D 10 ) of the sediment size distributions was very fine to medium sand, and the coarse tail (≥ D 90 ) of sediment-size distribution was coarse sand to gravel. Coarsest sediments in both surveys were found within or immediately downstream of bedrock-floored reaches. Statistical analysis revealed that the particle-size distributions between the survey samples were statistically identical, suggesting no overall difference in main-channel-bed sediment-size distribution between 1925 and present. This was a surprising result given the magnitude of river engineering undertaken along the study segment over the past ~ 90 years. The absence of substantial differences in main-channel-bed-sediment size suggests that flow competencies within the highly engineered navigation channel today are similar to conditions within the less-engineered historic channel.

Upper Mississippi River↗

USGS1994

Piezometer performance at Wildlife liquefaction site, California

In response to an urgent need for field data from instrumented liquefaction sites, the U.S. Geological Survey in 1982 selected and instrumented a site in southern California called the Wildlife site. Two accelerometers (one at ground surface and one at a depth of 7.5 m) and six electrical pore‐pressure transducers (five in a liquefiable silty sand layer) were placed at the site. The November 1987 Superstition Hills earthquake triggered sand boils and the desired instrumental response by generating excess pore‐water pressure that approximately equaled the initial effective overburden pressure. These records are the first from a field site to trace ground motions and pore pressures through the entire liquefaction process. Because pore pressure continued to rise after most of the seismic energy had propagated through the site, questions about the fidelity of the pore‐pressure records have been raised. Because of the importance of the Wildlife records, we reexamine pertinent aspects of the instruments and their placement, review their 1987 response, evaluate and respond to criticisms by Hushmand et al. (1992a, 1992b), and examine analyses of the records by other investigators that are pertinent to an evaluation of the fidelity of the piezometer records. This review concludes that no data or analyses have been developed that convincingly demonstrate that the pore‐pressure piezometers responded incorrectly. Conversely, an analysis by Zeghal and Elgamal (1994) provides strong evidence that the piezometers responded with a high degree of fidelity.

California↗

USGS2003

Well-Production Data and Gas-Reservoir Heterogeneity -- Reserve Growth Applications

Oil and gas well production parameters, including peakmonthly production (PMP), peak-consecutive-twelve month production (PYP), and cumulative production (CP), are tested as tools to quantify and understand the heterogeneity of reservoirs in fields where current monthly production is 10 percent or less of PMP. Variation coefficients, defined as VC= (F5-F95)/F50, where F5, F95, and F50 are the 5th, 95th, and 50th (median) fractiles of a probability distribution, are calculated for peak and cumulative production and examined with respect to internal consistency, type of production parameter, conventional versus unconventional accumulations, and reservoir depth. Well-production data for this study were compiled for 69 oil and gas fields in the Lower Pennsylvanian Morrow Formation of the Anadarko Basin, Oklahoma. Of these, 47 fields represent production from marine clastic facies. The Morrow data were supplemented by data from the Upper Cambrian and Lower Ordovician Arbuckle Group, Middle Ordovician Simpson Group, Middle Pennsylvanian Atoka Formation, and Silurian and Lower Devonian Hunton Group of the Anadarko Basin, one large gas field in Upper Cretaceous reservoirs of north-central Montana (Bowdoin field), and three areas of the Upper Devonian and Lower Mississippian Bakken Formation continuous-type (unconventional) oil accumulation in the Williston Basin, North Dakota and Montana. Production parameters (PMP, PYP, and CP) measure the net result of complex geologic, engineering, and economic processes. Our fundamental hypothesis is that well-production data provide information about subsurface heterogeneity in older fields that would be impossible to obtain using geologic techniques with smaller measurement scales such as petrographic, core, and well-log analysis. Results such as these indicate that quantitative measures of production rates and production volumes of wells, expressed as dimensionless variation coefficients, are potentially valuable tools for documenting reservoir heterogeneity in older fields for field redevelopment and risk analysis.

Bulletin↗

USGS1993

Economics of utilization of high sulfur coal resources - an integrated market approach

Before the Clean Air Act Amendments of 1990, coal policies - especially coal research policies - were geared to find a solution to the sulfur emission problem. However, technologies to reduce sulfur emissions cannot be tailored for a single coal. A technology that will clean Illinois coal to compliance levels will do the same, or nearly the same, for most other types of coal. This paper will discuss an integrated approach to the analysis of the future of coals from different regions in the United States and its implications for coal-related policies by government and industry.

Mining Engineering↗

USGS2006

Statistical characteristics of storm interevent time, depth, and duration for eastern New Mexico, Oklahoma, and Texas

The design of small runoff-control structures, from simple floodwater-detention basins to sophisticated best-management practices, requires the statistical characterization of rainfall as a basis for cost-effective, risk-mitigated, hydrologic engineering design. The U.S. Geological Survey, in cooperation with the Texas Department of Transportation, has developed a framework to estimate storm statistics including storm interevent times, distributions of storm depths, and distributions of storm durations for eastern New Mexico, Oklahoma, and Texas. The analysis is based on hourly rainfall recorded by the National Weather Service. The database contains more than 155 million hourly values from 774 stations in the study area. Seven sets of maps depicting ranges of mean storm interevent time, mean storm depth, and mean storm duration, by county, as well as tables listing each of those statistics, by county, were developed. The mean storm interevent time is used in probabilistic models to assess the frequency distribution of storms. The Poisson distribution is suggested to model the distribution of storm occurrence, and the exponential distribution is suggested to model the distribution of storm interevent times. The four-parameter kappa distribution is judged as an appropriate distribution for modeling the distribution of both storm depth and storm duration. Preference for the kappa distribution is based on interpretation of L-moment diagrams. Parameter estimates for the kappa distributions are provided. Separate dimensionless frequency curves for storm depth and duration are defined for eastern New Mexico, Oklahoma, and Texas. Dimension is restored by multiplying curve ordinates by the mean storm depth or mean storm duration to produce quantile functions of storm depth and duration. Minimum interevent time and location have slight influence on the scale and shape of the dimensionless frequency curves. Ten example problems and solutions to possible applications are provided.

New Mexico, Oklahoma, Texas↗

USGS2019

Relaxation response of critically stressed macroscale surficial rock sheets

Rock environments both underground and on Earth’s surface show indications of energetic macroscale fracture. In tunnels and excavations, these manifest as rockbursts—energetic explosions of rock that can damage engineering projects, and may pose ongoing financial and safety risk as rock stresses adjust during post-failure relaxation. In natural settings at the surface, evidence for rockbursts exist in the form of tent-like structures of ruptured exfoliation sheets, but few direct observations of such events exist, precluding the analysis of how natural rock formations may evolve after rupture. Here we investigate the post-failure evolution of a granitic rock dome following rapid fracture events (i.e., surficial rockbursts) that occurred in California, USA during 2014–2016. Building upon previous work that showed a thermal stress origin for the observed fracturing, we investigate the return to background stress conditions (i.e., stress relaxation) observed in both short- (week, month) and long-term (multi-year) rock deformation trends. Acoustic emissions, deformation, and environmental monitoring data indicate that partially detached rock sheets forming the surface of the dome undergo fracture aperture closing during cooling periods, concurrent with reduction of rock stress by the source of forcing (i.e., thermal stress). However, with sufficient critical and/or subcritical fracture, our observations also show that rock sheets can become decoupled from the source of stress, resulting in a long-term return to background stress conditions. Our results provide insight into the cyclic and likely ephemeral nature of rock fracture in surficial rock domes, as well as in underground rockburst environments.

Rock Mechanics and Rock Engineering↗

USGS2011

USGS remote sensing coordination for the 2010 Haiti earthquake

In response to the devastating 12 January 2010, earthquake in Haiti, the US Geological Survey (USGS) provided essential coordinating services for remote sensing activities. Communication was rapidly established between the widely distributed response teams and data providers to define imaging requirements and sensor tasking opportunities. Data acquired from a variety of sources were received and archived by the USGS, and these products were subsequently distributed using the Hazards Data Distribution System (HDDS) and other mechanisms. Within six weeks after the earthquake, over 600,000 files representing 54 terabytes of data were provided to the response community. The USGS directly supported a wide variety of groups in their use of these data to characterize post-earthquake conditions and to make comparisons with pre-event imagery. The rapid and continuing response achieved was enabled by existing imaging and ground systems, and skilled personnel adept in all aspects of satellite data acquisition, processing, distribution and analysis. The information derived from image interpretation assisted senior planners and on-site teams to direct assistance where it was most needed.

Photogrammetric Engineering and Remote Sensing↗

USGS2012

Evaluation of long-term gas hydrate production testing locations on the Alaska North Slope

The results of short-duration formation tests in northern Alaska and Canada have further documented the energy-resource potential of gas hydrates and have justified the need for long-term gas-hydrate-production testing. Additional data acquisition and long-term production testing could improve the understanding of the response of naturally occurring gas hydrate to depressurization-induced or thermal-, chemical-, or mechanical-stimulated dissociation of gas hydrate into producible gas. The Eileen gashydrate accumulation located in the Greater Prudhoe Bay area in northern Alaska has become a focal point for gas-hydrate geologic and production studies. BP Exploration (Alaska) Incorporated and ConocoPhillips have each established research partnerships with the US Department of Energy to assess the production potential of gas hydrates in northern Alaska. A critical goal of these efforts is to identify the most suitable site for production testing. A total of seven potential locations in the Prudhoe Bay, Kuparuk River, and Milne Point production units were identified and assessed relative to their suitability as a long-term gas-hydrate-production test sites. The test-site-assessment criteria included the analysis of the geologic risk associated with encountering reservoirs for gas-hydrate testing. The site-selection process also dealt with the assessment of the operational/logistical risk associated with each of the potential test sites. From this review, a site in the Prudhoe Bay production unit was determined to be the best location for extended gas-hydrate-production testing. The work presented in this report identifies the key features of the potential test site in the Greater Prudhoe Bay area and provides new information on the nature of gas-hydrate occurrence and the potential impact of production testing on existing infrastructure at the most favorable sites. These data were obtained from well-log analysis, geological correlation and mapping, and numerical simulation.

Alaska↗

USGS1992

US GeoData

US GeoData tapes are computer tapes which contain cartographic data in digital form. The 1:2,000,000-scale data are available in two forms. The graphic form can be used to generate computer-plotted maps. The content and scale of the maps can be varied to meet your needs. The topologically-structured form of US GeoData is suitable for input to geographic information systems for use in spatial analysis and geographic studies. Both forms must be used in conjunction with appropriate software. US GeoData tapes offer convenience, accuracy, flexibility, and cost effectiveness to many map users. Business, industry, and government users who are involved in network planning and analysis, transportation, demography, land use, or any activity where data can be related to, or plotted on a map will find US GeoData a valuable resource.

General Information Product↗