USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources

Assessment of regional change in nitrate concentrations in groundwater in the Central Valley, California, USA, 1950s-2000s

A regional assessment of multi-decadal changes in nitrate concentrations was done using historical data and a spatially stratified non-biased approach. Data were stratified into physiographic subregions on the basis of geomorphology and soils data to represent zones of historical recharge and discharge patterns in the basin. Data were also stratified by depth to represent a shallow zone generally representing domestic drinking-water supplies and a deep zone generally representing public drinking-water supplies. These stratifications were designed to characterize the regional extent of groundwater with common redox and age characteristics, two factors expected to influence changes in nitrate concentrations over time. Overall, increasing trends in nitrate concentrations and the proportion of nitrate concentrations above 5 mg/L were observed in the east fans subregion of the Central Valley. Whereas the west fans subregion has elevated nitrate concentrations, temporal trends were not detected, likely due to the heterogeneous nature of the water quality in this area and geologic sources of nitrate, combined with sparse and uneven data coverage. Generally low nitrate concentrations in the basin subregion are consistent with reduced geochemical conditions resulting from low permeability soils and higher organic content, reflecting the distal portions of alluvial fans and historical groundwater discharge areas. Very small increases in the shallow aquifer in the basin subregion may reflect downgradient movement of high nitrate groundwater from adjacent areas or overlying intensive agricultural inputs. Because of the general lack of regionally extensive long-term monitoring networks, the results from this study highlight the importance of placing studies of trends in water quality into regional context. Earlier work concluded that nitrate concentrations were steadily increasing over time in the eastern San Joaquin Valley, but clearly those trends do not apply to other physiographic subregions within the Central Valley, even where land use and climate are similar.

California↗

A GIS and statistical approach to identify variables that control water quality in hydrothermally altered and mineralized watersheds, Silverton, Colorado, USA

Hydrothermally altered bedrock in the Silverton mining area, southwest Colorado, USA, contains sulfide minerals that weather to produce acidic and metal-rich leachate that is toxic to aquatic life. This study utilized a geographic information system (GIS) and statistical approach to identify watershed-scale geologic variables in the Silverton area that influence water quality. GIS analysis of mineral maps produced using remote sensing datasets including Landsat Thematic Mapper, advanced spaceborne thermal emission and reflection radiometer, and a hybrid airborne visible infrared imaging spectrometer and field-based product enabled areas of alteration to be quantified. Correlations between water quality signatures determined at watershed outlets, and alteration types intersecting both total watershed areas and GIS-buffered areas along streams were tested using linear regression analysis. Despite remote sensing datasets having varying watershed area coverage due to vegetation cover and differing mineral mapping capabilities, each dataset was useful for delineating acid-generating bedrock. Areas of quartz–sericite–pyrite mapped by AVIRIS have the highest correlations with acidic surface water and elevated iron and aluminum concentrations. Alkalinity was only correlated with area of acid neutralizing, propylitically altered bedrock containing calcite and chlorite mapped by AVIRIS. Total watershed area of acid-generating bedrock is more significantly correlated with acidic and metal-rich surface water when compared with acid-generating bedrock intersected by GIS-buffered areas along streams. This methodology could be useful in assessing the possible effects that alteration type area has in either generating or neutralizing acidity in unmined watersheds and in areas where new mining is planned.

Colorado↗

Factors affecting the movement and persistence of nitrate and pesticides in the surficial and upper Floridan aquifers in two agricultural areas in the southeastern United States

Differences in the degree of confinement, redox conditions, and dissolved organic carbon (DOC) are the main factors that control the persistence of nitrate and pesticides in the Upper Floridan aquifer (UFA) and overlying surficial aquifer beneath two agricultural areas in the southeastern US. Groundwater samples were collected multiple times from 66 wells during 1993–2007 in a study area in southwestern Georgia (ACFB) and from 48 wells in 1997–98 and 2007–08 in a study area in South Carolina (SANT) as part of the US Geological Survey National Water-Quality Assessment Program. In the ACFB study area, where karst features are prevalent, elevated nitrate-N concentrations in the oxic unconfined UFA (median 2.5 mg/L) were significantly (p = 0.03) higher than those in the overlying oxic surficial aquifer (median 1.5 mg/L). Concentrations of atrazine and deethylatrazine (DEA; the most frequently detected pesticide and degradate) were higher in more recent groundwater samples from the ACFB study area than in samples collected prior to 2000. Conversely, in the SANT study area, nitrate-N concentrations in the UFA were mostly <0.06 mg/L, resulting from anoxic conditions and elevated DOC concentrations that favored denitrification. Although most parts of the partially confined UFA in the SANT study area were anoxic or had mixed redox conditions, water from 28 % of the sampled wells was oxic and had low DOC concentrations. Based on the groundwater age information, nitrate concentrations reflect historic fertilizer N usage in both the study areas, but with a lag time of about 15–20 years. Simulated responses to future management scenarios of fertilizer N inputs indicated that elevated nitrate-N concentrations would likely persist in oxic parts of the surficial aquifer and UFA for decades even with substantial decreases in fertilizer N inputs over the next 40 years.

Florida;Georgia;South Carolina↗

The long-term trends (1982-2006) in vegetation greenness of the alpine ecosystem in the Qinghai-Tibetan Plateau

The increased rate of annual temperature in the Qinghai-Tibetan Plateau exceeded all other areas of the same latitude in recent decades. The influence of the warming climate on the alpine ecosystem of the plateau was distinct. An analysis of alpine vegetation under changes in climatic conditions was conducted in this study. This was done through an examination of vegetation greenness and its relationship with climate variability using the Advanced Very High Resolution Radiometer satellite imagery and climate datasets. Vegetation in the plateau experienced a positive trend in greenness, with 18.0 % of the vegetated areas exhibiting significantly positive trends, which were primarily located in the eastern and southwestern parts of the plateau. In grasslands, 25.8 % of meadows and 14.1 % of steppes exhibited significant upward trends. In contrast, the broadleaf forests experienced a trend of degradation. Temperature, particularly summer temperature, was the primary factor promoting the vegetation growth in the plateau. The wetter and warmer climate in the east contributed to the favorable conditions for vegetation. The alpine meadow was mostly sensitive to temperature, while the steppes were sensitive to both temperature and precipitation. Although a warming climate was expected to be beneficial to vegetation growth in the alpine region, the rising temperature coupled with reduced precipitation in the south did not favor vegetation growth due to low humidity and poor soil moisture conditions.

Qinghai-tibetan Plateau↗

Geochemical evolution of groundwater in the Mud Lake area, eastern Idaho, USA

Groundwater with elevated dissolved-solids concentrations&mdash;containing large concentrations of chloride, sodium, sulfate, and calcium&mdash;is present in the Mud Lake area of Eastern Idaho. The source of these solutes is unknown; however, an understanding of the geochemical sources and processes controlling their presence in groundwater in the Mud Lake area is needed to better understand the geochemical sources and processes controlling the water quality of groundwater at the Idaho National Laboratory. The geochemical sources and processes controlling the water quality of groundwater in the Mud Lake area were determined by investigating the geology, hydrology, land use, and groundwater geochemistry in the Mud Lake area, proposing sources for solutes, and testing the proposed sources through geochemical modeling with PHREEQC. Modeling indicated that sources of water to the eastern Snake River Plain aquifer were groundwater from the Beaverhead Mountains and the Camas Creek drainage basin; surface water from Medicine Lodge and Camas Creeks, Mud Lake, and irrigation water; and upward flow of geothermal water from beneath the aquifer. Mixing of groundwater with surface water or other groundwater occurred throughout the aquifer. Carbonate reactions, silicate weathering, and dissolution of evaporite minerals and fertilizer explain most of the changes in chemistry in the aquifer. Redox reactions, cation exchange, and evaporation were locally important. The source of large concentrations of chloride, sodium, sulfate, and calcium was evaporite deposits in the unsaturated zone associated with Pleistocene Lake Terreton. Large amounts of chloride, sodium, sulfate, and calcium are added to groundwater from irrigation water infiltrating through lake bed sediments containing evaporite deposits and the resultant dissolution of gypsum, halite, sylvite, and bischofite.

Idaho↗

Effect of phytoremediation on concentrations of benzene, toluene, naphthalene, and dissolved oxygen in groundwater at a former manufactured gas plant site, Charleston, South Carolina, USA, 1998–2014

Concentrations of benzene, toluene, naphthalene, and dissolved oxygen in groundwater at a former manufactured gas plant site near Charleston, South Carolina, USA, have been monitored since the installation of a phytoremediation system of hybrid poplar trees in 1998. Between 2000 and 2014, the concentrations of benzene, toluene, and naphthalene (BT&N) in groundwater in the planted area have decreased. For example, in the monitoring well containing the highest concentrations of BT&N, benzene concentrations decreased from 10,200 &micro;g/L to less than 4000 &micro;g/L, toluene concentrations decreased from 2420 &micro;g/L to less than 20 &micro;g/L, and naphthalene concentrations decreased from 6840 &micro;g/L to less than 3000 &micro;g/L. Concentrations of BT&N in groundwater in all wells were observed to be lower during the summer months relative to the winter months of a particular year during the first few years after installing the phytoremediation system, most likely due to increased transpiration and contaminant uptake by the hybrid poplar trees during the warm summer months; this pathway of uptake by trees was confirmed by the detection of benzene, toluene, and naphthalene in trees during sampling events in 2002, and later in the study in 2012. These data suggest that the phytoremediation system affects the groundwater contaminants on a seasonal basis and, over multiple years, has resulted in a cumulative decrease in dissolved-phase contaminant concentrations in groundwater. The removal of dissolved organic contaminants from the aquifer has resulted in a lower demand on dissolved oxygen supplied by recharge and, as a result, the redox status of the groundwater has changed from anoxic to oxic conditions. This study provides much needed information for water managers and other scientists on the viability of the long-term effectiveness of phytoremediation in decreasing groundwater contaminants and increasing dissolved oxygen at sites contaminated by benzene, toluene, and naphthalene.

South Carolina↗

In-well time-of-travel approach to evaluate optimal purge duration during low-flow sampling of monitoring wells

A common assumption with groundwater sampling is that low (<0.5 L/min) pumping rates during well purging and sampling captures primarily lateral flow from the formation through the well-screened interval at a depth coincident with the pump intake. However, if the intake is adjacent to a low hydraulic conductivity part of the screened formation, this scenario will induce vertical groundwater flow to the pump intake from parts of the screened interval with high hydraulic conductivity. Because less formation water will initially be captured during pumping, a substantial volume of water already in the well (preexisting screen water or screen storage) will be captured during this initial time until inflow from the high hydraulic conductivity part of the screened formation can travel vertically in the well to the pump intake. Therefore, the length of the time needed for adequate purging prior to sample collection (called optimal purge duration) is controlled by the in-well, vertical travel times. A preliminary, simple analytical model was used to provide information on the relation between purge duration and capture of formation water for different gross levels of heterogeneity (contrast between low and high hydraulic conductivity layers). The model was then used to compare these time–volume relations to purge data (pumping rates and drawdown) collected at several representative monitoring wells from multiple sites. Results showed that computation of time-dependent capture of formation water (as opposed to capture of preexisting screen water), which were based on vertical travel times in the well, compares favorably with the time required to achieve field parameter stabilization. If field parameter stabilization is an indicator of arrival time of formation water, which has been postulated, then in-well, vertical flow may be an important factor at wells where low-flow sampling is the sample method of choice.

Environmental Earth Sciences↗

Rebuttal to “The case of the Biscayne Bay and aquifer near Miami, Florida: density-driven flow of seawater or gravitationally driven discharge of deep saline groundwater?” by Weyer (Environ Earth Sci 2018, 77:1–16)

A recent paper by Weyer (Environ Earth Sci 2018, 77:1–16) challenges the widely accepted interpretation of groundwater heads and salinities in the coastal Biscayne aquifer near Miami, Florida, USA. Weyer (2018) suggests that the body of saltwater that underlies fresh groundwater just inland of the coast is not a recirculating wedge of seawater, but results instead from upward migration of deep saline groundwater driven by regional flow. Perhaps more significantly, Weyer (2018) also asserts that established hydrologic theory is fundamentally incorrect with respect to buoyancy. Instead of acting along the direction of gravity (that is, vertically), Weyer (2018) claims, buoyancy acts instead along the direction of the pressure gradient. As a result, Weyer (2018) considers currently available density-dependent groundwater flow and transport modeling codes, and the analyses based on them, to be in error. In this rebuttal, we clarify the inaccuracies in the main points of Weyer’s (2018) paper. First, we explain that Weyer (2018) has misinterpreted observed equivalent freshwater heads in the Biscayne aquifer and that his alternative hypothesis concerning the source of the saltwater does not explain the observed salinities. Then, we review the established theory of buoyancy to identify the problem with Weyer’s (2018) alternative theory. Finally, we present theory and cite successful benchmark simulations to affirm the suitability of currently available codes for modeling density-dependent groundwater flow and transport.

Environmental Earth Sciences↗

Identifying natural and anthropogenic variability of uranium at the well scale, Homestake Superfund site, near Milan, New Mexico, USA

The San Mateo Creek Basin in New Mexico, USA is located within the Grants Mineral Belt-an area with numerous uranium (U) ore deposits, mines, and milling operations. Six monitoring wells set in an alluvial aquifer near the Homestake Mining Co. Superfund site in the lower San Mateo Creek Basin were logged with a suite of borehole geophysical tools including spectral gamma-ray (SGR), vertically profiled with passive samplers for U and selenium (Se) concentrations, and purged sampled for same constituents. The integrated approach allowed for an assessment on the role of heterogeneity (both physical and chemical) in determining U concentrations in groundwater. Uranium, as measured with SGR logging, is ubiquitous in the alluvial aquifer and the underlying Chinle Group. Aqueous U concentrations appear to be inversely related to thorium (Th) concentrations, as measured by the SGR log, indicating the possibility that U is bound in or adsorbed to clays in the aquifer. The stratigraphy of the alluvium likely plays a role in elevated concentrations of aqueous U. Interbedded clay and sand layers allow for the mobilization of U in oxic sandy layers from U adsorbed in sediments in reduced clay layers. The stratigraphy also plays a role in the degree of mixing of groundwater in the formation and well. Mixing can obscure the ability to identify U sources. Mixing is exacerbated by the relatively long screens (> 20 ft long or > 6.1 m) of the monitoring wells.

New Mexico↗

Differentiating anthropogenic and natural sources of uranium by geochemical fingerprinting of groundwater at the Homestake Uranium Mill, Milan, New Mexico, USA

A multiparameter geochemical-isotopic fingerprinting approach was used to differentiate natural and anthropogenic signatures of uranium contamination near the Homestake uranium mill site (Site), near Milan, New Mexico, USA. The Site consists of two tailings piles from milling operations and groundwater contamination from these tailings have been noted. The Site lies within the lower San Mateo Creek Basin with multiple regional sources of U contamination from mining and mill operations and is underlain by a heterogeneous alluvial aquifer, which is underlain by basement rock of the Chinle Group and the lowermost San Andres-Glorieta aquifer. To help decipher signatures, several statistical approaches were used including PCA, NMDS, and cluster analysis. Trilinear piper diagrams indicate two end member water types at the Site, sulfate-Na-K and sulfate-Ca. Natural alluvial aquifer groundwater in this area, relatively unaffected by mining or milling, appears to be more dominated by bicarbonate than sulfate and the deeper San Andres-Glorieta aquifer that has a mixture of sulfate and bicarbonate. Uranium concentrations from the Site fall into three broad categories, less than the drinking water standard of 30 µg/L (n=3), from 30 to 100 µg/L (n=9) and greater than 100 µg/L (n=8). Component loadings in a principal component analysis are highest for uranium isotopes, 228Ra, gross alpha-beta, molybdenum, chloride, uranium, and sodium, which affect the similarities or differences among wells sampled. Results suggest that several alluvial wells upgradient from the Site have anthropogenic fingerprints from regional sources related to upgradient mining. Wells with higher uranium concentrations have uranium activity ratios close to 1, which is indicative of mining or milling signatures. These same wells have elevated radon activities. This information can be used to inform Site managers on the source of water related to uranium at the Site and provide an approach for geochemical fingerprinting.

New Mexico↗

Sediment record of mining legacy and water quality from a drinking-water reservoir, Aztec, New Mexico, USA

The record of mining legacy and water quality was investigated in sediments collected in 2018 from four trenches in the Aztec, New Mexico, drinking-water reservoir #1. Bulk chemical analysis of sediments with depth in the reservoir revealed variable trace-element (uranium, vanadium, arsenic, copper, sulfur, silver, lead, and zinc) concentrations, which appear to coincide with historical mining and milling operations. Cesium-137 age dating, which identified the location of the 1963 radioactive fallout maximum, combined with the known age of the bottom and top of the sediment trenches, was used to estimate a polynomial sedimentation rate (average rate = 1.7 cm/yr). The clay size fraction (< 0.004 mm) was the dominant grain-size fraction of the sediments. Abundant fine-grained phyllosilicate (clay) minerals, predominantly montmorillonite and kaolinite, may explain sorption properties of trace elements. Scanning electron microscopy evaluation of sediments from two trenches showed copper and zinc associated with sulfur, and arsenic associated with iron and aluminum oxides. Results from laboratory batch experiments indicated that uranium, vanadium, and arsenic were released when sediments were reacted with a 150 mg/L sodium bicarbonate solution whereas copper was released when sediments were reacted with 2 mMol/L acetic acid. Observed concentrations from the two leach tests were below regulatory thresholds for delivery of solids to a landfill and were below drinking-water standards. Diatom relative abundance indicates that the water quality in the reservoir was not impaired by high metal concentrations.

Colorado, New Mexico↗

Geologic controls on groundwater salinity reversal in North Coles Levee Oil Field, southern San Joaquin Valley, California, USA

This paper documents a reversal in the groundwater salinity depth gradient in the North Coles Levee Oil Field in the San Joaquin Valley, California. Salinity, measured in mg/L, was mapped with water quality data from groundwater and oil and gas wells and salinity estimated from oil and gas well borehole geophysical logs using Archie's equation. The resulting three-dimensional salinity volume shows groundwater salinity increasing with depth through the Tulare and San Joaquin Formations to about 50,000 mg/L at 1100 m depth, then decreasing to 10,000–31,000 mg/L in the Etchegoin Formation at 1400 m depth. The high salinity zone occurs near the base of the San Joaquin Formation in sand lenses in shales that have been interpreted as representing a mudflat environment. The groundwater and produced water geochemistry show formation waters lie on the seawater dilution line, indicating the salinity structure is largely the result of dilution or evaporation of seawater and not due to water–rock interactions. Instead, changing depositional environments linked to decreasing sea level may be responsible for variably saline water at or near the time of deposition, leading to a salinity reversal preserved in connate waters. The steepness of the salinity reversal varies laterally, possibly due to post-depositional freshwater recharge allowed by thick sands, alternatively, by a change in connate water composition due to a lateral facies change present at the time of deposition. These results illustrate geologic and paleogeographic processes that drive the vertical salinity structure of groundwater in shallow alluvial basins.

California↗

Hydrologic compartmentalization and analytic-element groundwater-flow simulations for a draining mine tunnel

Draining mine tunnels contribute contaminants to groundwater and surface water, but remediation strategies may be hindered as hydrogeologic characterization and modeling of these heterogeneous features generally relies on sparse data sets. The Captain Jack mine site in Colorado, USA, presents a unique data set allowing for temporal evaluation of groundwater connectivity in the vicinity of an abandoned mine, where a hydraulic bulkhead is impounding water within the mine workings. This study applied statistical analysis of system pressure responses to bulkheading and used an analytic-element modeling approach to characterize heterogeneity and groundwater flow. Groundwater-level elevation data collected over a period of 4 years, both prior to and after bulkheading, indicate that the mine workings act as a sink to the local groundwater system. Despite groundwater flow being generally oriented towards the mine workings, there are also large vertical and horizontal hydraulic gradients which persist through time. Although the groundwater system is highly compartmentalized, statistical analysis using Kendall’s Tau indicates correlations between hydraulic head changes in the mine workings and several wells completed in crystalline bedrock, indicating the influence of fracture flow. An analytic-element model was parameterized to account for uncertainty in hydraulic conductivity, recharge, and discharge. Model results reproduced the range of observed hydraulic heads in the mine workings and adjacent igneous dikes but failed to closely simulate hydraulic heads in several wells located distal from the mine workings in granitic bedrock. The modeling approach shows potential promise, however, for conducting preliminary modeling to guide data collection at other similar mine sites.

Colorado↗

Attenuation of acid rock drainage by stimulating sulfur-reducing bacteria

Iron-sulfide minerals found in shale formations are stable under anaerobic conditions. However, in the presence of oxygen and water, acid-loving chemolithotrophic bacteria can transform the iron-sulfide minerals into a toxic solution of sulfuric acid and dissolved iron and minerals known as acid rock drainage (ARD). The objective of this study was to disrupt chemolithotrophic bacteria responsible for ARD using chemical treatments and to foster an environment favorable for competing microorganisms to attenuate the biologically induced ARD. Chemical treatments were injected into flow-through microcosms consisting of 501 g of pyrite-rich shale pieces inoculated with ARD bacteria. Three treatments were tested in the microcosms: (1) a sodium hydroxide-bleach mix, (2) a sodium lactate solution, and (3) a sodium lactate-soy infant formula mix. The effectiveness of the treatments was assessed by monitoring pH, dissolved iron, and other geochemical constituents in the discharge waters. The optimal treatment was a sequential injection of 1.5 g sodium hydroxide, followed by 0.75 g lactate and 1.5 g soy formula dissolved in 20 mL water. The pH of the discharge water rose to 6.0 within 10 days, dissolved iron concentrations dropped below 1 mg/L, the median alkalinity increased to 98 mg/L CaCO 3 , and sulfur-reducing and slime-producing bacteria populations were stimulated. The ARD attenuating benefits of this treatment were still evident after 231 days. Other treatments provided a number of ARD attenuating effects but were tempered by problems such as high phosphate concentrations, short longevity, or other shortcomings. The results of these laboratory microcosm experiments were promising for the attenuation of ARD. Additional investigations and careful selection of treatment methods will be needed for field application.

Tennessee↗

Interlaboratory comparison of testing hydraulic, elastic, and failure properties in compression: Lessons learned

Many geoscientific problems require us to exploit synergies of experimental and numerical approaches, which in turn lead to questions regarding the significance of experimental details for validation of numerical codes. We report results of an interlaboratory comparison regarding experimental determination of mechanical and hydraulic properties of samples from five rock types, three sandstone varieties with porosities ranging from 5% to 20%, a marble, and a granite. The objective of this study was to build confidence in the participating laboratories’ testing approaches and to establish tractable standards for several physical properties of rocks. We addressed the issue of sample-to-sample variability by investigating the variability of basic physical properties of samples of a particular rock type and by performing repeat tests. Compressive strength of the different rock types spans an order of magnitude and shows close agreement between the laboratories. However, differences among stress–strain relations indicate that the external measurement of axial displacement and the determination of system stiffness require special attention, apparently more so than the external load measurement. Furthermore, post-failure behavior seems to exhibit some machine-dependence. The different methods used for the determination of hydraulic permeability, covering six orders of magnitude for the sample suite, yield differences in absolute values and pressure dependence for some rocks but not for others. The origin of the differences in permeability, in no case exceeding an order of magnitude, correlate with the compressive strength and potentially reflect a convolution of end plug–sample interaction, sample-to-sample variability, heterogeneity on sample scale, and/or anisotropy, the last two aspects are notably not accounted for by the applied evaluation procedures. Our study provides an extensive data set apt for “benchmarking” considerations, be it regarding new laboratory equipment or numerical modeling approaches.

Environmental Earth Sciences↗

Ambient flow and transport in long-screened, sand-packed wells: Insights into cross contamination and wellbore flow

The presence of long-screened wells with a surrounding sand pack can have a major effect on the redistribution of contaminants in groundwater, particularly when the wells are set in low-hydraulic conductivity aquifers. Such redistribution, or cross contamination, can occur through vertical flow and advective transport or by in-well mixing via multiple non-advective transport processes. A multi-method approach, including the use of single borehole dilution tracer (SBDT) logging, was undertaken to estimate vertical transport of trichloroethylene (TCE) in 8 discontinued remedial extraction wells, all constructed with long screens (100 ft, or 30.6 m long) and surrounding sand packs, at Site 25, Edwards Air Force Base, California. The site is within an enclosed drainage basin that is underlain primarily by quartz-monzonite-granitic rocks in various states of weathering. Prior to this study, little information was available on the depths of fracture zones intersecting the wellbores. Results indicate that because of in-well mixing processes, a potential redistribution of TCE of up to 9 g/d per well occurs as a consequence of leaving the wells inactive (unpumped) and unsealed, as measured by SBDT logging. Simulations of flow made with a generic model of the site show that if the wells were to be sealed with well liners, with the intent of reducing vertical TCE transport but the sand pack left intact, TCE transport decreases by 53% overall compared to leaving the wells unlined.

Environmental Earth Sciences↗

The initial instability and finite-amplitude stability of alternate bars in straight channels

The initial instability and fully developed stability of alternate bars in straight channels are investigated using linearized and nonlinear analyses. The fundamental instability leading to these features is identified through a linear stability analysis of the equations governing the flow and sediment transport fields. This instability is explained in terms of topographically induced steering of the flow and the associated pattern of erosion and deposition on the bed. While the linear theory is useful for examining the instability mechanism, this approach is shown to yield relatively little information about well-developed alternate bars and, specifically, the linear analysis is shown to yield poor predictions of the fully developed bar wavelength. A fully nonlinear approach is presented that permits computation of the evolution of these bed features from an initial perturbation to their fully developed morphology. This analysis indicates that there is typically substantial elongation of the bar wavelength during the evolution process, a result that is consistent with observations of bar development in flumes and natural channels. The nonlinear approach demonstrates that the eventual stability of these features is a result of the interplay between topographic steering effects, secondary flow production as a result of streamline curvature, and gravitationally induced modifications of sediment fluxes over a sloping bed.

Earth-Science Reviews↗

Ground-water research in the U.S.A.

Ground-water reservoirs and the overlying unsaturated zone-collectively, the "subsurface"-have an enormous capacity to supply water to wells and useful plants, to store water to meet future needs for the same purposes, and, under suitable precautions, to accept wastes. This capacity can be exploited on a maximum scale, however, only on the basis of information one or more orders of magnitude greater than that available at present on the distribution, recoverability, and replenishability of subsurface water. Because usable water must be made available, and waste water must be disposed of, at costs of only a cent or a few cents per cubic meter, there is a critical need for research to devise methods of accomplishing these water-management tasks at reasonable cost. Among the chief target areas for research in subsurface hydrology are permeability distribution, including vertical permeability; prediction of the departure of the storage coefficient from the theoretically "instantaneous" property assumed in flow equations; theory of unsaturated flow based on fundamental soil characteristics that can be measured practicably; geochemical relations including the effects of injecting water of one composition into zones occupied by waters of different composition, generation of acid mine water, occurrence of saline water, and salt-fresh-water relations in coastal and other areas; prediction of the fate of wastes injected underground; geophysical techniques both surface and subsurface to extend, at low cost, information obtained by other means; and practical techniques of artificial recharge, especially through wells. ?? 1967.

Earth-Science Reviews↗