SEARCH · USGS Science
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This report lists the streamflow and reservoir stations in The Great Basin for which records have been or are to be published in reports of the Geological Survey for periods through September 30, 1970. It supersedes Geological Survey Circular 580. It was updated by personnel of the Data Reports Unit, Water Resources Division, Geological Survey.
Several studies from the 1970s and more recently (for example, Hall (1975), Daley and others (2009) and Mullaney (2009)) have found that concentrations of chloride and sodium in groundwater in New Hampshire have increased during the past 50 years. Increases likely are related to road salt and other anthropogenic sources, such as septic systems, wastewater, and contamination from landfills and salt-storage areas. According to water-quality data reported to the New Hampshire Department of Environmental Services (NHDES), about 100 public water systems (5 percent) in 2010 had at least one groundwater sample with chloride concentrations that were equal to or exceeded the U.S. Environmental Protection Agency (USEPA) secondary maximum contaminant level (SMCL) of 250 mg/L before the water was treated for public consumption. The SMCL for chloride is a measurement of potential cosmetic or aesthetic effects of chloride in water. High concentrations of chloride and sodium in drinking-water sources can be costly to remove. A new cooperative study between the U.S. Geological Survey (USGS) and the NHDES (Medalie, 2012) assessed chloride and sodium levels in groundwater in New Hampshire from the 1960s through 2011. The purpose of the study was to integrate all data on concentrations of chloride and sodium from groundwater in New Hampshire available from various Federal and State sources, including from the NHDES, the New Hamsphire Department of Health and Human Services, the USGS, and the U.S. Environmental Protection SurveyAgency (USEPA), for public and private (domestic) wells and to organize the data into a database. Medalie (2012) explained the many assumptions and limitations of disparate data that were collected to meet wide-ranging objectives. This fact sheet summarizes the most important findings of the data.
Population level studies of genetic diversity can provide information about population structure, individual genetic distinctiveness and former population size. They are especially important for rare and threatened species like the Alala, where they can be used to assess extinction risks and evolutionary potential. In an ideal situation multiple methods should be used to detect variation, and these methods should be comparable across studies. In this report, we discuss AFLP (Amplified Fragment Length Polymorphism) as a genetic approach for detecting variation in the Alala , describe our findings, and discuss these in relation to mtDNA and microsatellite data reported elsewhere in this same population. AFLP is a technique for DNA fingerprinting that has wide applications. Because little or no prior knowledge of the particular species is required to carry out this method of analysis, AFLP can be used universally across varied taxonomic groups. Within individuals, estimates of diversity or heterozygosity across genomes may be complex because levels of diversity differ between and among genes. One of the more traditional methods of estimating diversity employs the use of codominant markers such as microsatellites. Codominant markers detect each allele at a locus independently. Hence, one can readily distinguish heterozygotes from homozygotes, directly assess allele frequencies and calculate other population level statistics. Dominant markers (for example, AFLP) are scored as either present or absent (null) so heterozygotes cannot be directly distinguished from homozygotes. However, the presence or absence data can be converted to expected heterozygosity estimates which are comparable to those determined by codominant markers. High allelic diversity and heterozygosity inherent in microsatellites make them excellent tools for studies of wild populations and they have been used extensively. One limitation to the use of microsatellites is that heterozygosity estimates are affected by the mutation rate at microsatellite loci, thus introducing a bias. Also, the number of loci that can be studied is frequently limited to fewer than 10. This theoretically represents a maximum of one marker for each of 10 chromosomes. Dominant markers like AFLP allow a larger fraction of the genome to be screened. Large numbers of loci can be screened by AFLP to resolve very small individual differences that can be used for identification of individuals, estimates of pairwise relatedness and, in some cases, for parentage analyses. Since AFLP is a dominant marker (can not distinguish between +/+ homozygote versus +/- heterozygote), it has limitations for parentage analyses. Only when both parents are homozygous for the absence of alleles (-/-) and offspring show a presence (+/+ or +/-) can the parents be excluded. In this case, microsatellites become preferable as they have the potential to exclude individual parents when the other parent is unknown. Another limitation of AFLP is that the loci are generally less polymorphic (only two alleles/locus) than microsatellite loci (often >10 alleles/locus). While generally fewer than 10 highly polymorphic microsatellite loci are enough to exclude and assign parentage, it might require up to 100 or more AFLP loci. While there are pros and cons to different methodologies, the total number of loci evaluated by AFLP generally offsets the limitations imposed due to the dominant nature of this approach and end results between methods are generally comparable. Overall objectives of this study were to evaluate the level of genetic diversity in the captive population of Alala, to compare genetic data with currently available pedigree information, and to determine the extent of relatedness of mating pairs and among founding individuals.
Selected aquifer-test data from 36 counties in eastern Kansas were collected from numerous sources and publications in order to produce a documented compilation of aquifer tests in one report. Data were obtained chiefly from private consulting firms and from government agencies. Hydraulic properties determined included transmissivity, storage coefficient (where observation well was available), and in some cases hydraulic properties of a confining layer. The aquifers tested comprised three main types of rocks--consolidated rock deposits, glacial deposits, and alluvial deposits that include the ' Equus beds, ' an extensive alluvial deposit in south-central Kansas. The Theis recovery equation and the Cooper-Jacob modified nonequilibrium equation were the two principal solution methods used. Other methods used included the Theis nonequilibrium equation, the Hantush-Jacob equation for a leaky confined aquifer, Hantush 's modified leaky equation in which storage from a confining layer was considered, the Boulton 's delayed-yield equation. Additionally, a specific-capacity method of estimating transmissivity was used when only a single drawdown value was available. (USGS)
The Bath valley-fill aquifer, southern New York, composed of outwash, ice-contact, and ice-disintegration sand and gravel, is highly productive and is in many areas in hydraulic contact with the Cohocton River. Potential well yields range 50 to more than 1,000 gallons per minute. Most of the aquifer is under shallow water-table conditions and vulnerable to surface contamination. Thickness ranges from 20 to 40 feet. Buried aquifers are present locally. The aquifer system underlies an area containing only a few small communities and therefore is not heavily pumped. Geohydrologic data are compiled on six maps at 1:24,000 scale and on a sheet of geologic sections. The maps depict surficial geology, soil-infiltration capacity, potentiometric surface, aquifer thickness, well yields, and land use. This map report set is one in a series of four that depict selected aquifers in Wester New York. It supplements a series that is being done by the U.S. Geological Survey in cooperation with State agencies. The maps are based largely on published reports, data filled in several State agencies, and some additional field data collection. (USGS)
A review of publicly available coal quality data during the coal resource assessment of the southwestern part of the Powder River Basin, Wyoming (SWPRB), revealed significant problems and limitations with those data. Subsequent citations of data from original sources often omitted important information, such as moisture integrity and information needed to evaluate the issue of representativeness. Occasionally, only selected data were quoted, and some data were misquoted. Therefore, it was important to try to resolve issues concerning both the accuracy and representativeness of each available dataset. The review processes demonstrated why it is always preferable to research and evaluate the circumstances regarding the sampling and analytical methodology from the original data sources when evaluating coal quality information, particularly if only limited data are available. Use of the available published data at face value would have significantly overestimated the coal quality for all the coal fields from both the Fort Union and Wasatch Formations in the SWPRB assessment area. However, by using the sampling and analytical information from the original reports, it was possible to make reasonable adjustments to reported data to derive more realistic estimates of coal quality.
Hydrologic data collected during 1977-79 as part of a water-resources investigation of storm runoff in Upper Grange Hall Creek basin, Adams County, Colo., are presented in this report. Data presented in tabular form consist of: (1) Estimated daily precipitation at one site (April through October, 1978 and 1979); (2) mean daily streamflow at two sites (December 1977 through September 1979); (3) instantaneous streamflow at two sites along Grange Hall Creek and corresponding cumulative rainfall at one to three sites for 17 storms (April 1, 1978, to August 26, 1979); (4) concentrations of selected major ions, fecal-coliform bacteria, suspended sediment, nutrients, and trace elements at five sites during dry-weather flow, at three sites during rainfall runoff, and at five sites during snowmelt runoff; and (5) concentrations of pesticides and polychlorinated biphenyls at two sites during dry-weather flow and rainfall runoff. (USGS)
Water-resources data were collected to describe the hydrologic conditions at the Allison Woods research station near Statesville, North Carolina, in the Piedmont Physiographic Province of North Carolina. Data collected by the U.S. Geological Survey and the North Carolina Department of Environment and Natural Resources, Division of Water Quality, from April 2005 through September 2008 are presented in this report. Data presented include well-construction characteristics and periodic groundwater-level measurements for 29 wells, borehole geophysical logs for 8 wells, hourly groundwater-level measurements for 5 wells, continuous water-quality measurements for 3 wells, periodic water-quality samples for 12 wells and 1 surface-water station, slug-test results for 11 wells, and shallow groundwater-flow maps. In addition, the geology and hydrogeology at the site are summarized.
In 2003, a study was conducted to evaluate the accuracy and precision of 10 laboratories that analyze water-quality samples for phosphorus concentrations in the Catskill Mountain region of New York State. Many environmental studies in this region rely on data from these different laboratories for water-quality analyses, and the data may be used in watershed modeling and management decisions. Therefore, it is important to determine whether the data reported by these laboratories are of comparable accuracy and precision. Each laboratory was sent 12 samples for triplicate analysis for total phosphorus, total dissolved phosphorus, and soluble reactive phosphorus. Eight of these laboratories reported results that met comparability criteria for all samples; the remaining two laboratories met comparability criteria for only about half of the analyses. Neither the analytical method used nor the sample concentration ranges appeared to affect the comparability of results. The laboratories whose results were comparable gave consistently comparable results throughout the concentration range analyzed, and the differences among methods did not diminish comparability. All laboratories had high data precision as indicated by sample triplicate results. In addition, the laboratories consistently reported total phosphorus values greater than total dissolved phosphorus values, and total dissolved phosphorus values greater than soluble reactive phosphorus values, as would be expected. The results of this study emphasize the importance of regular laboratory participation in sample-exchange programs.
Limnological data on major streams in Chester County, Pennsylvania are tabulated to provide a base line as to the present stream conditions. As land-use patterns change and further urbanization takes place, it is anticipated that these data will serve as a basis for comparison of conditions in the future. The 13 basins encompass a total drainage area of 1,812 km2 (697 mi2) of the 1,976 km2 (760 mi2) within Chester County. Four of the streams are tributaries to the Schuylkill River and include Pickering, Stony Run, Pigeon, and French Creek. Tributaries to the Delaware River include Darby, Crum, Ridley, Chester, Red Clay, and White Clay Creeks. The Elk Creeks flow into the Chesapeake Bay. The Brandywine is a tributary to the Christiana River, itself a tributary to the Delaware. The Octoraro Creek is a tributary to the Susquehanna River. Chester County, which is located in the Piedmont area of Pennsylvania, is undergoing rapid transition from a rural to suburban condition as the population increases. This basic-data report contains the chemical, physical, and biological information collected for the period fall 1969 through fall 1974. The network of 50 stations is shown in figure 1, which is followed by a listing (table 1) of station numbers and a brief description of station locations. Table 2 shows the physical, chemical, and bacteriological data collected by station and date. Table 3 shows the benthic invertebrate data collected by station and date.
A bibliography was compiled of the water-resources investigations published by the U.S. Geological Survey, Water Resources Division, in Tennessee. The bibliography includes an alphabetical listing by author, as well as listings by general and specific areas in Tennessee. The publications are classified also by discipline and type of report: open- file reports, water-supply papers, water-resources investigations, professional papers, circulars, hydrologic investigations atlases, miscellaneous investigations maps, journal and symposium articles, water-resources bulletin articles, and water-resources data reports.
The purpose of this study is to geochemically evaluate three areas within the Greenville 1° x 2° quadrangle (see index map) that have been shown by previous studies to contain anomalously high amounts of tin. Jackson and Moore (1992) reported the presence of cassiterite (SnO 2 )-bearing heavy-mineral concentrates from stream sediment samples that were collected during a regional geochemical reconnaissance of the Greenville 1° x 2° quadrangle. The data reported here confirm identified in selected heavy-mineral concentrate samples. In addition, anomalously high concentrations of barium, beryllium, lanthanum, and thorium are also reported for parts of the same areas. No significant mineral deposits are known to occur in the study areas. There was, however, minor production of monazite from several nearby localities (Sloan, 1908), and gold was produced from deposits in the northeastern part of Greenville County and nearby Spartanburg County (McCauley and Butler, 1966). The three areas selected for resampling are located in the Inner Piedmont physiographic province of South Carolina (see index map). The generalized tectonic setting of the region and the locations of the study is just north of Greenville, S.C. Much of it is within the moderately to steeply sloped terrane of Paris Mountain State Park where elevations reach approximately 600 m. Simpsonville, S.C., is neat the center of the second study area, and the southernmost study area is near Hickory Tavern, S.C. Both the Simpsonville and Hickory Tavern study areas are in more gently rolling Piedmont terrane. Each of the sampled areas is drained by tributaries of the Enoree and Reedy Rivers. Parts of three different thrust sheets underlie the region covered by this study (fig. 1); in ascending structural position, they are the Six Mile, Paris Mountain, and Laurens thrust sheets (Nelson and others, 1987). Nelson (1988, p. 7) described the contacts between these sheets as being along unnamed faults. The rocks in and around the study areas have undergone sillimanite-muscovite-grade metamorphism (Nelson, 1988, p. 9). Nelson (1988, p. 13) reports that the Six Mile thrust sheet was metamorphosed about 344 Ma. The geology of these sheets as described in this study, including geologic contacts, rock descriptions, and unit names, generally follows that of Nelson and others (1987, 1989). Within the Paris Mountain study area, rocks of the Paris Mountain thrust sheet predominate (fig. 2) and consist of a biotite-muscovite-sillimanite schist (EZsp) that has extensive lenses of fine- to medium- grained biotite granite gneiss (Pzgp). Areas of biotite granite gneiss that occur in the southern part of the Paris Mountain study area contain extensive pegmatitic and leucogranitic phases. These pegmatitic zones consist mostly of coarse-grained microcline feldspar and quartz with minor amounts of muscovite, biotite, and garnet. Smaller pegmatite lenses (<0.5 m thick) that occur within the biotite-muscovite-sillimanite schist of the Paris Mountain study area are generally of similar mineralogy, although some contain tourmaline crystals up to 5 cm in length. The Six Mile thrust sheet underlies the northern edge of the Paris Mountain study area, where it is composed of gneissic biotitic granites of the Caesars Head Granite (figs. 1 and 2). The northwestern part of the Simpsonville study area (figs. 1 and 3), within the Paris Mountain thrust sheet, is underlain by a biotite-muscovite-sillimanite schist (EZsp) that contains lenses of biotite granite gneiss (Pzgp). In the southeastern part of the Simpsonville study area, within the Laurens thrust sheet, biotite gneiss (EZgl), biotite granite gneiss (Pzgf), and minor amphibolite (EZal) are interlayered biotite (EZgl), granite gneiss (Dgg), and amphibolite (EZal) of the Laurens thrust sheet (fig. 4).
Three gravity profiles and principal facts of 2,604 gravity stations in the southwest quadrant of the Nevada Test Site are documented in this data report. The residual gravity profiles show the gravity measurements and the smoothed curves derived from these points that were used in geophysical interpretations. The principal facts include station label, latitude, longitude, elevation, observed gravity value, and terrain correction for each station as well as the derived complete Bouguer and isostatic anomalies, reduced at 2.67 g/cm 3. Accuracy codes, where available, further document the data.
The mining industry, in most cases, targets a specific valuable commodity that is present in small quantities within large volumes of extracted material. After milling and processing, most of the extracted material and the effluents are stored as waste (tailings) in impoundments, such as dams or waste dumps, or are backfilled into underground mines. In time, tailing materials may become an issue of environmental and health concern due to the hazardous elements, ions, and oxides contained within the waste material. In addition, handling and storage of such waste in dams may pose the risk of dam failure with catastrophic consequences to nature and nearby communities. On the other hand, tailings may offer potential as secondary sources of critical elements (CEs), including rare earth elements (REEs), which may have been overlooked during primary production and processing. Therefore, treating mine tailings as a resource has economic and environmental benefits by reducing the waste from new and historical mine sites through remining. One of the critical steps for taking advantage of these benefits is to spatially quantify the resources and the pollutants, which require the application of adequate data analysis and modeling methods, often to compositional geochemical data. Utilizing adequate methods is especially important for correctly quantifying resource potential, as the quantities will often be at low concentrations. This work presents quantification of resource potential (Au, Ag, Cu, Zn, Pb) and elements of environmental concern (Hg and As) from the tailings of a historic mine site, Katherine Mine, AZ, USA. Data reported by the U.S. Bureau of Mines (USBM) after extensive field campaigns in the 1990s, including sampling from tailing impoundment and surrounding areas for geochemical characterization and geophysical surveys, were used. First, compositional data (CoDa) analysis was employed to explore associations of sampling locations, geochemical parts, and the clustering of samples. Next, sequential Gaussian simulation (SGSIM) was applied to samples that showed a genetic link to tailing material after isometric log-ratio transformation (ilr) and mix/max autocorrelation factor (MAF) transformation for spatial modeling and uncertainty evaluation. Geostatistical results revealed spatial variability of concentrations within the tailing area. Uncertainty evaluation based on realizations indicated that Cu (14.27–20.01 t), Zn (44.23–76.23 t), and Pb (22.56–38.28 t) are the most abundant elements within a 5 %–95 % interval, followed by Ag and Au (~5.3 and 0.18 t, at 50th percentile), respectively. Of the elements of health concern, As was found to be ~4.8 t (50th percentile) in the tailing area. The work also showed that ~0.51 t As, 0.005 t Hg, 0.020 t of Au, and 0.62 t of Ag were carried to Lake Mohave by an ephemeral stream called Katherine Wash, which transects the tailings.
This is the second of a series of reports planned to include the results of digitization and routine analyses of strong-motion earthquake accelerograms published by the U.S. Geological Survey. Serving as a model for this effort is the collection of data reports published by the Earthquake Engineering Research Laboratory of the California Institute of Technology during the years 1969 - 1975 and covering the significant records of the period from 1933 up to the San Fernando earthquake of February 9, 1971. The first of the present series of reports, Open File Report No. 76-609, covered the significant records of 1971 subsequent to the San Fernando earthquake. The present report includes the results of some ongoing work on Peru records.
This is the third of a series of reports planned to include the results of digitization and routine analyses of strong-motion earthquake accelerograms published by the U.S. Geological Survey. Serving as a model for this effort is the collection of data reports published by the Earthquake Engineering Research Laboratory of the California Institute of Technology during the years 1969 - 1975 and covering the significant records of the period from 133 up to the San Fernando earthquake of February 9, 1971. Earlier reports in the present series have covered the significant records of 1971 subsequent to San Fernando (Open file report No. 76-609) and Peru records from 1951 to 1974 (Open file report No. 77-587). The present report includes a selection of 1972 records.
We present strontium isotopic ( 88 Sr/ 86 Sr and 87 Sr/ 86 Sr) results obtained by 87 Sr– 84 Sr double spike thermal ionization mass-spectrometry (DS-TIMS) for several standards as well as natural water samples and mineral samples of abiogenic and biogenic origin. The detailed data reduction algorithm and a user-friendly Sr-specific stand-alone computer program used for the spike calibration and the data reduction are also presented. Accuracy and precision of our δ 88 Sr measurements, calculated as permil (‰) deviations from the NIST SRM-987 standard, were evaluated by analyzing the NASS-6 seawater standard, which yielded δ 88 Sr = 0.378 ± 0.009‰. The first DS-TIMS data for the NIST SRM-607 potassium feldspar standard and for several US Geological Survey carbonate, phosphate, and silicate standards (EN-1, MAPS-4, MAPS-5, G-3, BCR-2, and BHVO-2) are also reported. Data obtained during this work for Sr-bearing solids and natural waters show a range of δ 88 Sr values of about 2.4‰, the widest observed so far in terrestrial materials. This range is easily resolvable analytically because the demonstrated external error (±SD, standard deviation) for measured δ 88 Sr values is typically ≤0.02‰. It is shown that the “true” 87 Sr/ 86 Sr value obtained by the DS-TIMS or any other external normalization method combines radiogenic and mass-dependent mass-fractionation effects, which cannot be separated. Therefore, the “true” 87 Sr/ 86 Sr and the δ 87 Sr parameter derived from it are not useful isotope tracers. Data presented in this paper for a wide range of naturally occurring sample types demonstrate the potential of the δ 88 Sr isotope tracer in combination with the traditional radiogenic 87 Sr/ 86 Sr tracer for studying a variety of biological, hydrological, and geological processes.
The U.S. Geological Survey began a Regional Aquifer- System Analysis of the Northern Rocky Mountains Intermontane Basins of western Montana and central and central and northern Idaho in 1990 to establish a regional framework of information for aquifers in 54 intermontane basins in an area of about 77,500 square miles. Selected hydrogeologic data have been used as part of this analysis to define the hydro- logic systems. Records of 1,376 wells completed in 31 of the 34 intermontane basins in the Montana part of the study area are tabulated in this report. Data consist of location, alttiude of land surface, date well constructed, geologic unit, depth of well, diameter of casing, type of finish, top of open interval, primary use of water, water level, date water level measured, discharge, specific capacity, source of discharge data, type of log available, date water-quality parameters measured, specific conductance, pH, and temperature. Hydrographs for selected wells also are included. Locations of wells and basins are shown on the accompanying plate.