USGS Science⌕ Search

SEARCH · USGS Science

Results for “Chemistry”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources
USGS2014

Report of committee on the chemistry of natural waters, 1941–42

The membership of the Committee during the past year was as follows: I. A. Dennison, National Bureau of Standards; C S. Howard (Chairman), Geological Survey; C. S. Scofield, Department of Agriculture; D. G. Thompson, Geological Survey; and T. G. Thompson, University of Washington, Seattle, Washington. SCOFIELD has continued his studies in connection with the salt balance in irrigated areas and has made progress‐reports to interested parties concerning the salt balance on the El Paso Project, Wapato Project, and the Yuma Project. These studies are of great interest to those responsible for the operation of the projects and should be of considerable value to other projects in indicating the volumes of water that may be necessary under certain conditions to insure proper drainage of the project.

Eos, Transactions, American Geophysical Union↗
USGS2010

Applications of factor analysis in study of chemistry of groundwater quality, Mojave River Valley, California

Factor analysis is applied to results of chemical analyses of 103 water samples from wells in the Upper and Middle Mojave River valley, San Bernardino County, California. Chemical analyses showed that there are three principal chemical types of water, calcium bicarbonate, sodium sulfate, and sodium chloride, as well as many mixtures of the three. Data were studied by factor analysis to learn the relative importance of each principal ion in determining the variations among the samples, and to examine the possibility of chemical equilibrium between aqueous and solid phases in the aquifers. Most of the covariance in the system may be accounted for by variances of Ca +2 , Mg +2 , Na +1 , SO 4 −2 , and Cl −1 . There is almost identical loading on the constituents Na +1 and Cl −1 . The variance in chemical composition of the hydrochemical system is governed largely by sources of sodium chloride. None of the components is controlled by equilibrium between ions in the water and minerals in the aquifers. Concentrations of NO 3 −1 and F −1 vary independently of other constituents. Geographic distribution of statistical loadings of the principal constituents at individual wells does not reveal sources of the constituents, which must be deduced from geologic and hydrologic evidence. Factor analysis, however, furnished the critical information on chemical relationships basic to the deduction.

California↗
USGS2010

Variation of rain chemistry during storms at two sites in northern California

The chemical composition of rainfall at Menlo Park, on San Francisco Bay, is compared with rainfall at Petrolia, which is near the coast about 500 km north of San Francisco. Sequential samples representing 1.35 to 5.4 mm of rain were collected from November 1971 to January 1972. At rural Petrolia the Cl:Na ratio was that of seawater for Cl concentrations ranging from 0.02 to 38 mg/l. In metropolitan Menlo Park the Cl:Na ratio in rain closely approximated that in seawater above about 0.5 mg/l Cl, but at lower Cl concentrations the ratio exceeded that in seawater, a fact attributed to the presence of anthropogenic Cl. Other constituents dissolved in Menlo Park rain (along with their concentration ranges in milligrams per liter), and believed to be derived in part from anthropogenic sources, were Ca (0.01–1.07), Mg (<0.01–1.08), Pb (0.003–0.035), Zn (0.002–0.013), Mn (0.0001–0.0057), Cu (0.0008–0.0024), NO 3 ‐N (0.02–0.54), and Br (<0.01–0.12). The range of p H values was smaller in the rural than in the metropolitan areas; average H + activity corresponded to a p H of 5.1 to 5.2 in both areas. At Petrolia, p H decreased with increased dissolved salts in rainfall, but no relation between p H and dissolved salts was evident at Menlo Park.

California↗
USGS2005

An integrated view of the chemistry and mineralogy of martian soils

The mineralogical and elemental compositions of the martian soil are indicators of chemical and physical weathering processes. Using data from the Mars Exploration Rovers, we show that bright dust deposits on opposite sides of the planet are part of a global unit and not dominated by the composition of local rocks. Dark soil deposits at both sites have similar basaltic mineralogies, and could reflect either a global component or the general similarity in the compositions of the rocks from which they were derived. Increased levels of bromine are consistent with mobilization of soluble salts by thin films of liquid water, but the presence of olivine in analysed soil samples indicates that the extent of aqueous alteration of soils has been limited. Nickel abundances are enhanced at the immediate surface and indicate that the upper few millimetres of soil could contain up to one per cent meteoritic material.

Nature↗
USGS2020

Gas hydrates in sustainable chemistry

Gas hydrates have received considerable attention due to their important role in flow assurance for the oil and gas industry, their extensive natural occurrence on Earth and extraterrestrial planets, and their significant applications in sustainable technologies including but not limited to gas and energy storage, gas separation, and water desalination. Given not only their inherent structural flexibility depending on the type of guest gas molecules and formation conditions, but also the synthetic effects of a wide range of chemical additives on their properties, these variabilities could be exploited to optimise the role of gas hydrates. This includes increasing their industrial applications, understanding and utilising their role in Nature, identifying potential methods for safely extracting natural gases stored in naturally occurring hydrates within the Earth, and for developing green technologies. This review summarizes the different properties of gas hydrates as well as their formation and dissociation kinetics and then reviews the fast-growing literature reporting their role and applications in the aforementioned fields, mainly concentrating on advances during the last decade. Challenges, limitations, and future perspectives of each field are briefly discussed. The overall objective of this review is to provide readers with an extensive overview of gas hydrates that we hope will stimulate further work on this riveting field.

Chemical Society Reviews↗
USGS2019

A 20-year record of water chemistry in an alpine setting, Mount Emmons, Colorado, USA

From 1997 to the present, the U.S. Geological Survey and other agencies have been collecting water samples for chemical analyses on Mount Emmons in central Colorado, USA. The geology of Mount Emmons is dominated by Upper Cretaceous to Paleogene sediments of marine to continental origin, with felsic intrusive rocks interrupting the sedimentary block. Extensive sulphide-rich alteration accompanied the intrusive events and forms an alteration halo in the sediments. Weathering of these sulphide minerals has led to numerous springs and seeps with a naturally low pH and high concentrations of metals, especially Fe and Zn. Superimposed on the natural geochemical signature are acid, metal-rich drainages from several mines and drill holes. Thus, streams on Mt. Emmons have a mix of natural and anthropogenic metal sources. Nearly 450 samples compose the database, with numerous sample locations replicated from the late 1990s to the present. Although there does not appear to be any temporal pattern in the data, consistent spatial variations are observed that allow us to characterize the natural and anthropogenic water sources.

Colorado↗
USGS2011

A revised 87Sr/86Sr curve for the Silurian: Implications for global ocean chemistry and the Silurian timescale

Recent recalibration of the Silurian timescale and improved global chronostratigraphic correlation of Silurian strata significantly altered the Silurian 87 Sr/ 86 Sr curve and the temporal extent of available data. Whereas previous Silurian 87 Sr/ 86 Sr composites showed a generally monotonic increase throughout the Silurian, revisions to the Silurian timescale now require a major increase in the rate of change in 87 Sr/ 86 Sr at or near the onset of the Gorstian Age of the Ludlow Epoch. Similarly, improved chronostratigraphic correlations between Silurian outcrops on Anticosti Island, Canada, and Gotland, Sweden, indicate that the middle part of the Telychian Age, which is roughly 10%–15% of the total duration of the Silurian period, is undersampled and underrepresented in Silurian 87 Sr/ 86 Sr composites. A revised Silurian 87 Sr/ 86 Sr curve based on 241 new and published analyses confirms the significant increase in the rate of change of 87 Sr/ 86 Sr toward more radiogenic values near the base of the Ludlow Series. On the basis of these data, we propose that the rapid trend toward more radiogenic 87 Sr/ 86 Sr values is indicative of increased weathering of old sialic crust exposed during the Silurian uplift of portions of Baltica, Laurentia, and Avalonia. Importantly, however, the actual rate of change of 87 Sr/ 86 Sr will remain equivocal until the durations of Silurian epochs and ages are better constrained.

Journal of Geology↗
USGS2005

Use of tree-ring chemistry to document historical ground-water contamination events

The annual growth rings of tulip trees ( Liriodendron tulipifera L.) appear to preserve a chemical record of ground-water contamination at a landfill in Maryland. Zones of elevated iron and chlorine concentrations in growth rings from trees immediately downgradient from the landfill are closely correlated temporally with activities in the landfill expected to generate iron and chloride contamination in the ground water. Successively later iron peaks in trees increasingly distant from the landfill along the general direction of ground-water flow imply movement of iron-contaminated ground water away from the landfill. The historical velocity of iron movement (2 to 9 m/yr) and chloride movement (at least 40 m/yr) in ground water at the site was estimated from element-concentration trends of trees at successive distances from the landfill. The tree-ring-derived chloride-transport velocity approximates the known ground-water velocity (30 to 80 m/yr). A minimum horizontal hydraulic conductivity (0.01 to .02 cm/s) calculated from chloride velocity agrees well with values derived from aquifer tests (about 0.07 cm/s) and from ground-water modeling results (0.009 to 0.04 cm/s).

Groundwater↗
USGS2005

Influence of fracture anisotropy on ground water ages and chemistry, Valley and Ridge province, Pennsylvania

Model ground water ages based on chlorofluorocarbons (CFCs) and tritium/helium-3 (3H/3He) data were obtained from two arrays of nested piezometers located on the north limb of an anticline in fractured sedimentary rocks in the Valley and Ridge geologic province of Pennsylvania. The fracture geometry of the gently east plunging fold is very regular and consists predominately of south dipping to subhorizontal to north dipping bedding-plane parting and east striking, steeply dipping axial-plane spaced cleavage. In the area of the piezometer arrays, which trend north-south on the north limb of the fold, north dipping bedding-plane parting is a more dominant fracture set than is steeply south dipping axial-plane cleavage. The dating of ground water from the piezometer arrays reveals that ground water traveling along paths parallel to the dip direction of bedding-plane parting has younger 3H/3He and CFC model ages, or a greater component of young water, than does ground water traveling along paths opposite to the dip direction. In predominantly unmixed samples there is a strong positive correlation between age of the young fraction of water and dissolved sodium concentration. The travel times inferred from the model ages are significantly longer than those previously calculated by a ground water flow model, which assumed isotropically fractured layers parallel to topography. A revised model factors in the directional anisotropy to produce longer travel times. Ground water travel times in the watershed therefore appear to be more influenced by anisotropic fracture geometry than previously realized. This could have significant implications for ground water models in other areas underlain by similarly tilted or folded sedimentary rock, such as elsewhere in the Valley and Ridge or the early Mesozoic basins.

Pennsylvania↗
USGS2005

Long-term changes in ground water chemistry at a phytoremediation demonstration site

A field-scale demonstration project was conducted to evaluate the capability of eastern cottonwood trees ( Populus deltoides ) to attenuate trichloroethene (TCE) contamination of ground water. By the middle of the sixth growing season, trees planted where depth to water was <3 m delivered enough dissolved organic carbon to the underlying aquifer to lower dissolved oxygen concentrations, to create iron-reducing conditions along the plume centerline and sulfate-reducing or methanogenic conditions in localized areas, and to initiate in situ reductive dechlorination of TCE. Apparent biodegradation rate constants for TCE along the centerline of the plume beneath the phytoremediation system increased from 0.0002/d to 0.02/d during the first six growing seasons. The corresponding increase in natural attenuation capacity of the aquifer along the plume centerline, from 0.0004/m to 0.024/m, is associated with a potential decrease in plume-stabilization distance from 9680 to 160 m. Demonstration results provide insight into the amount of vegetation and time that may be needed to achieve cleanup objectives at the field scale.

Ground Water↗
USGS2005

Implications of ground water chemistry and flow patterns for earthquake studies

Ground water can facilitate earthquake development and respond physically and chemically to tectonism. Thus, an understanding of ground water circulation in seismically active regions is important for earthquake prediction. To investigate the roles of ground water in the development and prediction of earthquakes, geological and hydrogeological monitoring was conducted in a seismogenic area in the Yanhuai Basin, China. This study used isotopic and hydrogeochemical methods to characterize ground water samples from six hot springs and two cold springs. The hydrochemical data and associated geological and geophysical data were used to identify possible relations between ground water circulation and seismically active structural features. The data for ??18O, ??D, tritium, and 14C indicate ground water from hot springs is of meteoric origin with subsurface residence times of 50 to 30,320 years. The reservoir temperature and circulation depths of the hot ground water are 57??C to 160??C and 1600 to 5000 m, respectively, as estimated by quartz and chalcedony geothermometers and the geothermal gradient. Various possible origins of noble gases dissolved in the ground water also were evaluated, indicating mantle and deep crust sources consistent with tectonically active segments. A hard intercalated stratum, where small to moderate earthquakes frequently originate, is present between a deep (10 to 20 km), high-electrical conductivity layer and the zone of active ground water circulation. The ground water anomalies are closely related to the structural peculiarity of each monitoring point. These results could have implications for ground water and seismic studies in other seismogenic areas. Copyright ?? 2005 National Ground Water Association.

Yanhuai Basin↗
USGS2007

Fracture control of ground water flow and water chemistry in a rock aquitard

There are few studies on the hydrogeology of sedimentary rock aquitards although they are important controls in regional ground water flow systems. We formulate and test a three-dimensional (3D) conceptual model of ground water flow and hydrochemistry in a fractured sedimentary rock aquitard to show that flow dynamics within the aquitard are more complex than previously believed. Similar conceptual models, based on regional observations and recently emerging principles of mechanical stratigraphy in heterogeneous sedimentary rocks, have previously been applied only to aquifers, but we show that they are potentially applicable to aquitards. The major elements of this conceptual model, which is based on detailed information from two sites in the Maquoketa Formation in southeastern Wisconsin, include orders of magnitude contrast between hydraulic diffusivity (K/Ss) of fractured zones and relatively intact aquitard rock matrix, laterally extensive bedding-plane fracture zones extending over distances of over 10 km, very low vertical hydraulic conductivity of thick shale-rich intervals of the aquitard, and a vertical hydraulic head profile controlled by a lateral boundary at the aquitard subcrop, where numerous surface water bodies dominate the shallow aquifer system. Results from a 3D numerical flow model based on this conceptual model are consistent with field observations, which did not fit the typical conceptual model of strictly vertical flow through an aquitard. The 3D flow through an aquitard has implications for predicting ground water flow and for planning and protecting water supplies. ?? 2007 National Ground Water Association.

Ground Water↗
USGS2014

An assessment of morphometric indices, blood chemistry variables and an energy meter as indicators of the whole body lipid content in Micropterus dolomieu , Sander vitreus and Ictalurus punctatus

The effectiveness of several non-lethal techniques as indicators of total lipid content in smallmouth bass Micropterus dolomieu , walleye Sander vitreus and channel catfish Ictalurus punctatus was investigated. The techniques included (1) the Fulton and relative condition factors, (2) relative mass, (3) plasma indicators of nutritional status (alkaline phosphatase, calcium, cholesterol, protein, triglycerides and glucose) and (4) readings from a hand-held, microwave energy meter. Although simple linear regression analysis showed that lipid content was significantly correlated with several predictor variables in each species, the r 2 values for the relations ranged from 0&middot;17 to 0&middot;50 and no single approach was consistent for all species. Only one model, between energy-meter readings and lipid content in I. punctatus , had an r 2 value (0&middot;83) high enough to justify using it as a predictive tool. Results indicate that no single variable was an accurate and reliable indicator of whole body lipid content in these fishes, except the energy meter for I. punctatus .

Journal of Fish Biology↗