USGS Science⌕ Search

SEARCH · USGS Science

Results for “American Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources

Olivine friction at the base of oceanic seismogenic zones

We investigate the strength and frictional behavior of olivine aggregates at temperatures and effective confining pressures similar to those at the base of the seismogenic zone on a typical ridge transform fault. Triaxial compression tests were conducted on dry olivine powder (grain size ???60 ??m) at effective confining pressures between 50 and 300 MPa (using Argon as a pore fluid), temperatures between 600??C and 1000??C, and axial displacement rates from 0.06 to 60 ??m/s (axial strain rates from 3 ?? 10-6 to 3 ?? 10-3 s-1). Yielding shows a negative pressure dependence, consistent with predictions for shear enhanced compaction and with the observation that samples exhibit compaction during the initial stages of the experiments. A combination of mechanical data and microstructural observations demonstrate that deformation was accommodated by frictional processes. Sample strengths were pressure-dependent and nearly independent of temperature. Localized shear zones formed in initially homogeneous aggregates early in the experiments. The frictional response to changes in loading rate is well described by rate and state constitutive laws, with a transition from velocity-weakening to velocity-strengthening at 1000??C. Microstructural observations and physical models indicate that plastic yielding of asperities at high temperatures and low axial strain rates stabilizes frictional sliding. Extrapolation of our experimental data to geologic strain rates indicates that a transition from velocity weakening to velocity strengthening occurs at approximately 600??C, consistent with the focal depths of earthquakes in the oceanic lithosphere. Copyright 2007 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

Basement and regional structure along strike of the Queen Charlotte Fault in the context of modern and historical earthquake ruptures

The Queen Charlotte fault (QCF) is a dextral transform system located offshore of southeastern Alaska and western Canada, accommodating ∼4.4  cm/yr of relative motion between the Pacific and North American plates. Oblique convergence along the fault increases southward, and how this convergence is accommodated is still debated. Using seismic reflection data, we interpret offshore basement structure, faulting, and stratigraphy to provide a geological context for two recent earthquakes, an M w 7.5 strike‐slip event near Craig, Alaska, and an M w 7.8 thrust event near Haida Gwaii, Canada. We map downwarped Pacific oceanic crust near 54° N, between the two rupture zones. Observed downwarping decreases north and south of 54° N, parallel to the strike of the QCF. Bending of the Pacific plate here may have initiated with increased convergence rates due to a plate motion change at ∼6  Ma. Tectonic reconstruction implies convergence‐driven Pacific plate flexure, beginning at 6 Ma south of a 10° bend the QCF (which is currently at 53.2° N) and lasting until the plate translated past the bend by ∼2  Ma. Normal‐faulted approximately late Miocene sediment above the deep flexural depression at 54° N, topped by relatively undeformed Pleistocene and younger sediment, supports this model. Aftershocks of the Haida Gwaii event indicate a normal‐faulting stress regime, suggesting present‐day plate flexure and underthrusting, which is also consistent with reconstruction of past conditions. We thus favor a Pacific plate underthrusting model to initiate flexure and accommodation space for sediment loading. In addition, mapped structures indicate two possible fault segment boundaries along the QCF at 53.2° N and at 56° N.

Alaska↗

Black ducks and their Chesapeake Bay habitats: Proceedings of a symposium

The symposium 'Black Ducks and Their Chesapeake Bay Habitats,' held October 4, 2000, provided a forum for scientists to share research about the American black duck (Anas rubripes), an important breeding and wintering waterfowl species dependent upon the Chesapeake Bay habitats. American black ducks have declined significantly in the last 50 years and continue to be a species of management concern. The symposium, sponsored by the Wildfowl Trust of North America and the U.S. Geological Survey, highlighted papers and posters on a range of topics, from the traditional concerns of hunting, habitat, and hybridization to the more recent concerns of human disturbance and neophobia. Other presentations provided a historical perspective of black duck management. The direction that black duck conservation initiatives could and/or should take in the future was also discussed. As populations of humans in the Chesapeake Bay region continue to increase, we can expect that these subjects will receive increased discussion in the future.

Chesapeake Bay↗

Geochemical and mineralogical data for soils of the conterminous United States

In 2007, the U.S. Geological Survey initiated a low-density (1 site per 1,600 square kilometers, 4,857 sites) geochemical and mineralogical survey of soils of the conterminous United States as part of the North American Soil Geochemical Landscapes Project. Sampling and analytical protocols were developed at a workshop in 2003, and pilot studies were conducted from 2004 to 2007 to test and refine these recommended protocols. The final sampling protocol for the national-scale survey included, at each site, a sample from a depth of 0 to 5 centimeters, a composite of the soil A horizon, and a deeper sample from the soil C horizon or, if the top of the C horizon was at a depth greater than 1 meter, from a depth of approximately 80–100 centimeters. The <2-millimeter fraction of each sample was analyzed for a suite of 45 major and trace elements by methods that yield the total or near-total elemental content. The major mineralogical components in the samples from the soil A and C horizons were determined by a quantitative X-ray diffraction method using Rietveld refinement. Sampling in the conterminous United States was completed in 2010, with chemical and mineralogical analyses completed in May 2013. The resulting dataset provides an estimate of the abundance and spatial distribution of chemical elements and minerals in soils of the conterminous United States and represents a baseline for soil geochemistry and mineralogy against which future changes may be recognized and quantified. This report (1) describes the sampling, sample preparation, and analytical methods used; (2) gives details of the quality control protocols used to monitor the quality of chemical and mineralogical analyses over approximately six years; and (3) makes available the soil geochemical and mineralogical data in downloadable tables.

Data Series↗

Geologic map of the Dog River and northern part of the Badger Lake 7.5′ quadrangles, Hood River County, Oregon

The Dog River and northern part of the Badger Lake 7.5' quadrangles encompasses an area of ~201 km2 (77.6 mi2) of the High Cascades of north-central Oregon, lying across the eastern slopes of Mount Hood volcano (Figure 1-1; Plate 1; referred to herein as Dog River–Badger Lake area). Mount Hood, known as Wy’east to Native Americans, is Oregon’s tallest peak (3,427 m [11,241 ft]). The volcano has erupted episodically for the past 500,000 years, experiencing two major eruptive periods during the last 1,500 years (Scott and others, 1997a; Scott and others, 2003; Scott and Gardner, 2017). Cascade Range volcanism and structural development in the area dates back longer, with eruptive activity dating from latest Miocene to recent time; part of that volcano-tectonic record is detailed by new high-resolution geologic mapping presented here. The geology of the Dog River–Badger Lake area was mapped by the Oregon Department of Geology and Mineral Industries (DOGAMI) between 2017 and 2020, in collaboration with geoscientists from the U. S. Geological Survey Cascade Volcano Observatory (USGS CVO) and Hamilton College, New York. The primary objective of this investigation is to provide an updated and spatially accurate geologic framework for the Dog River–Badger Lake area as part of a multi-year study of the geology of the larger Middle Columbia Basin (Figure 1-1, Figure 1-2). Additional key objectives of this project are to: 1) determine the geologic history of volcanic rocks in this part of the northern Oregon Cascade Range, including lava flows and volcaniclastic deposits erupted from Middle Pleistocene to Holocene Mount Hood volcano; 2) provide significant new details about the structure and fault history along the northern segment of the High Cascades intra-arc graben (Hood River graben); and 3) better understand geologic hazards in the region, related to earthquakes, volcanoes, and landslides. New detailed geologic data presented here also provides a basis for future geologic, geohydrologic, and geohazard studies in the greater Middle Columbia Basin. Detailed geologic mapping in this part of the Middle Columbia Basin is a high priority of the Oregon Geologic Map Advisory Committee (OGMAC), supported in part by grants from the STATEMAP component of the USGS National Cooperative Geologic Mapping Program (G17AC00210, G19AC00160). Additional funds were provided by the State of Oregon. The core products of this study are this report, an accompanying geologic map and cross sections (Plate 1), an Esri ArcGIS™ geodatabase, and Microsoft Excel® spreadsheets tabulating point data for geochemistry, geochronology, magnetic polarity, orientation points, and well data. The geodatabase presents the new geologic mapping in a digital format consistent with the USGS National Cooperative Geologic Mapping Program Geologic Map Schema (GeMS) (U.S. Geological Survey National Cooperative Geologic Mapping Program, 2020). This geodatabase contains spatial information, including geologic polygons, contacts, structures, geochemistry, geochronology, magnetic observation, orientation points, and well data, as well as data about each geologic unit such as age, lithology, mineralogy, and structure. Digitization at scales of 1:8,000 or better was accomplished using a combination of high-resolution lidar topography and imagery. Surficial and bedrock geologic units contained in the geodatabase are depicted on the Plate 1 at a scale of 1:24,000. Both the geodatabase and geologic map are supported by this report describing the geology in detail.

Oregon↗

Local evidence of Pleistocene to recent orogeny in the Argentine Andes

Deformed continental sedimentary rocks are exposed in the province of Salta, northwestern Argentina, in one of many intermontane basins of the Puna, a high desert region of subparallel north-trending block-fault ranges. These rocks, formerly thought to be Tertiary but recently dated by fossil diatoms as Pleistocene or younger, comprise several thousand feet of elastics and evaporites interpreted as having accumulated in a structural basin under geologic and climatic conditions much like those of today. They are overlain unconformably by sedimentary rocks and sediments of three distinct depositional periods. The stratigraphic section is as follows: Fan gravels and playa deposits ( Recent ) - Disconformity - Flat-lying lacustrine sandstones and siltstones, minor salines - Angular unconformity - Gently folded conglomerates and sandstones - Angular unconformity - Folded and faulted conglomerate, sandstone, shale, evaporites, and tuffs The basin rocks are folded along north-trending axes and are cut by northeast- to southeast-trending normal faults and by a north-trending reverse fault; the next younger conglomerates and sandstones are gently folded; the two youngest units are undisturbed. The three unconformities, the faults and folds in the older beds, and post-lake-bed faulting of an erosion surface on an adjacent block all indicate intermittent late Pleistocene to Recent local deformation. Neither regional tension nor regional compression can explain both the Pleistocene to Recent movements on the regional block faults and the contemporaneous compressional structures within the basin. The mechanism of horst-wedging, suggested by a current explanation of the analogous ranges of the Great Basin, is proposed as a solution to the dilemma; the horst blocks, forced directly upward along Miocene normal faults, acted as wedges and compressed the sediments accumulating in the graben, creating the pattern of faults and folds now observed. If such structures are ever discovered in the North American Great Basin, as seems reasonable, they should offer new insight into the understanding of basin-and-range structure.

Andes Mountains↗

The quest for the perfect gravity anomaly: Part 2 - Mass effects and anomaly inversion

Gravity anomalies have become an important tool for geologic studies since the widespread use of high-precision gravimeters after the Second World War. More recently the development of instrumentation for airborne gravity observations, procedures for acquiring data from satellite platforms, the readily available Global Positioning System for precise vertical and horizontal control, improved global data bases, and enhancement of computational hardware and software have accelerated the use of the gravity method. As a result, efforts are being made to improve the gravity databases that are made available to the geoscience community by broadening their observational holdings and increasing the accuracy and precision of the included data. Currently the North American Gravity Database as well as the individual databases of Canada, Mexico, and the United States of America are being revised using new formats and standards. The objective of this paper is to describe the use of the revised standards for gravity data processing and modeling and there impact on geological interpretations. ?? 2005 Society of Exploration Geophysicists.

SEG Technical Program Expanded Abstracts↗

A rain splash transport equation assimilating field and laboratory measurements

Process-based models of hillslope evolution require transport equations relating sediment flux to its major controls. An equation for rain splash transport in the absence of overland flow was constructed by modifying an approach developed by Reeve (1982) and parameterizing it with measurements from single-drop laboratory experiments and simulated rainfall on a grassland in East Africa. The equation relates rain splash to hillslope gradient, the median raindrop diameter of a storm, and ground cover density; the effect of soil texture on detachability can be incorporated from other published results. The spatial and temporal applicability of such an equation for rain splash transport in the absence of overland flow on uncultivated hillslopes can be estimated from hydrological calculations. The predicted transport is lower than landscape-averaged geologic erosion rates from Kenya but is large enough to modify short, slowly eroding natural hillslopes as well as microtopographic interrill surfaces between which overland flow transports the mobilized sediment. Copyright 2010 by the American Geophysical Union. Copyright 2010 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗

A seismic refraction survey of the Imperial Valley Region, California

The U.S. Geological Survey conducted an extensive seismic refraction survey in the Imperial Valley region of California in 1979. The Imperial Valley is located in the Salton Trough, an active rift between the Pacific and North American plates. Forty shots fired at seven shot points were recorded by 100 portable seismic instruments at typical spacing of 0.5–1 km. More than 1300 recording locations were occupied, and more than 3000 usable seismograms were obtained. We analyzed five profiles using a standard ray‐tracing program, constructed a contour map of reduced travel times from our most widely recorded shot point, and modeled an existing gravity profile across the Salton Trough. Results are itemized: (1) All models have in common a sedimentary layer ( V p = 1.8–5.0 km/s), a “transition zone” ( V p = 5.0–5.65 km/s), a basement ( V p = 5.65 km/s in the Imperial Valley, 5.9 km/s on the bordering mesas), and subbasement ( V p = 7.2 km/s). (2) The sedimentary layer ranges in thickness along the axis of the Salton Trough from 3.7 km (Salton Sea) to 4.8 km (U.S.‐Mexican border). On the bordering mesas it is quite variable in thickness. (3) The “transition” zone is about 1 km thick in most places. In the Imperial Valley there are no marked velocity discontinuities in this zone between the sedimentary layer and basement. On the bordering mesas, however, there is a discontinuity at the top of this zone. (4) There are apparently two types of basement. On the bordering mesas, basement is crystalline igneous and metamorphic rocks. In the Imperial Valley, basement is mostly lower‐greenshist‐facies sedimentary rocks, based primarily on the smooth transition in character from sediment to basement arrivals, the low value of basement velocity, and the fact that deep (4 km) wells in the valley penetrate only the upper part of the known Cenozoic stratigraphic column for the Salton Trough. (5) The subbasement, or intermediate crustal layer, ranges in depth along the axis of the Salton Trough from 16 km (Salton Sea) to 10 km (U.S.‐Mexican border). Gravity modeling requires that this layer deepen and/or pinch out beneath the bordering mesas and mountain ranges. Based on its high velocity and the presence of intrusive basaltic rocks in the sedimentary section in the Imperial Valley, the subbasement is thought to be a mafic intrusive complex similar to oceanic middle crust. (6) Several structures are seen that affect basement, transition zone, and deeper parts of the sedimentary layer. They include a scarp along the Imperial fault, as much as 1 km down to the northeast, and a scarp passing roughly along the topographic boundary between the Imperial Valley and the bordering mesa to the west, as much as 3½ km down to the east. We interpret the latter scarp to be the suture, or rift boundary, between the older crystalline basement on the mesa and the younger metasedimentary basement in the Imperial Valley. (7) On a contour map of reduced travel time from our most widely recorded shot point, subtle patches of early arrivals among otherwise late arrivals in the central Imperial Valley correlate well with known geothermal resource areas having reservoir temperatures of more than 150°C. Apparently the Salton Trough is a location where new crust is being generated. As the rift opens, mafic intrusive rocks fill it from below as sedimentary rocks fill it from above. Rifting and intrusion produce high heat flow that metamorphoses the sedimentary rocks to shallow depth (metasedimentary basement in the Imperial Valley) and thus consolidates the new crust.

California↗

Documentation for initial seismic hazard maps for Haiti

In response to the urgent need for earthquake-hazard information after the tragic disaster caused by the moment magnitude (M) 7.0 January 12, 2010, earthquake, we have constructed initial probabilistic seismic hazard maps for Haiti. These maps are based on the current information we have on fault slip rates and historical and instrumental seismicity. These initial maps will be revised and improved as more data become available. In the short term, more extensive logic trees will be developed to better capture the uncertainty in key parameters. In the longer term, we will incorporate new information on fault parameters and previous large earthquakes obtained from geologic fieldwork. These seismic hazard maps are important for the management of the current crisis and the development of building codes and standards for the rebuilding effort. The boundary between the Caribbean and North American Plates in the Hispaniola region is a complex zone of deformation. The highly oblique ~20 mm/yr convergence between the two plates (DeMets and others, 2000) is partitioned between subduction zones off of the northern and southeastern coasts of Hispaniola and strike-slip faults that transect the northern and southern portions of the island. There are also thrust faults within the island that reflect the compressional component of motion caused by the geometry of the plate boundary. We follow the general methodology developed for the 1996 U.S. national seismic hazard maps and also as implemented in the 2002 and 2008 updates. This procedure consists of adding the seismic hazard calculated from crustal faults, subduction zones, and spatially smoothed seismicity for shallow earthquakes and Wadati-Benioff-zone earthquakes. Each one of these source classes will be described below. The lack of information on faults in Haiti requires many assumptions to be made. These assumptions will need to be revisited and reevaluated as more fieldwork and research are accomplished. We made two sets of maps using different assumptions about site conditions. One set of maps is for a firm-rock site condition (30-m averaged shear-wave velocity, Vs30, of 760 m/s). We also developed hazard maps that contain site amplification based on a grid of Vs30 values estimated from topographic slope. These maps take into account amplification from soils. We stress that these new maps are designed to quantify the hazard for Haiti; they do not consider all the sources of earthquake hazard that affect the Dominican Republic and therefore should not be considered as complete hazard maps for eastern Hispaniola. For example, we have not included hazard from earthquakes in the Mona Passage nor from large earthquakes on the subduction zone interface north of Puerto Rico. Furthermore, they do not capture all the earthquake hazards for eastern Cuba.

Open-File Report↗

California State Waters Map Series — Offshore of Tomales Point, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California&rsquo;s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 200 m) subsurface geology. Tomales Bay, approximately 20-km long and 1- to 2-km wide, formed along a submerged portion of the San Andreas Fault, which forms a right-lateral transform boundary between the North American and Pacific tectonic plates. The fault juxtaposes Cretaceous granitic rock to the southwest (exposed on Tomales Point) with the Jurassic and Cretaceous Franciscan Complex to the northeast (exposed on the northeast coast of the Tomales Bay), and has an estimated slip rate of about 17 to 30 mm/yr in this area. The destructive great 1906 California earthquake (M7.8, 4/18/1906) is thought to have nucleated on the San Andreas Fault about 60 km to the south, offshore of San Francisco, with the rupture extending northward through Tomales Bay and for an additional about 230 km to the south flank of Cape Mendocino. The northwest coast of Tomales Point is characterized by steep, high (as much as 100 m), barren, granitic cliffs and a rugged shoreline with a few small pocket beaches. There has been as much as 48 m of Tomales Point cliff retreat from 1929&ndash;30 to 2002. The granite is overlain by less resistant Tertiary sandstones at Kehoe Beach, the northern end of a continuous, wide, sandy beach backed by a large coastal dune field that extends for about 20 km south to Point Reyes Head. This long beach has a mixed history of accretion and retreat since the late 1800s. Tomales Point relief is asymmetrical so that most small coastal watersheds in the map area drain eastward from Inverness Ridge into Tomales Bay. Many of these steep drainages have small sandy beaches at their mouths. The east coast of Tomales Bay is characterized by more gentle, hummocky, hilly relief underlain by the landslide-prone Franciscan Complex. Keys Creek, the most prominent small watershed entering Tomales Bay from the east, has a small subaqueous delta at its mouth. Central Tomales Bay is relatively flat and underlain by fine sand and silt. The mouth of Tomales Bay is characterized by sand waves, dunes, and flats that have formed in response to strong tidal flow. Sand Point and Dillon Beach are located at the mouth of Tomales Bay and on the southeasternmost shores of Bodega Bay, respectively. The wide beach in this area is backed by an extensive (4.8 km 2 ) sand-dune complex. The enormous volume of sand on the beach and in the dune field is derived from southward littoral drift. This sediment is trapped by Tomales Bay and Tomales Point, which function as the south end of the Bodega Bay littoral cell. The continental shelf in California&rsquo;s State Waters in the Offshore of Tomales Point map area extends to water depths of about 70 m (mean slope of about 0.7&deg;) and is characterized by extensive, rugged, rocky seafloor. Granitic seafloor has a massive and fractured texture, whereas seafloor sedimentary rock outcrops commonly form distinctive &ldquo;ribs&rdquo; created by differential seafloor erosion of dipping beds of variable resistance. Direct sediment supply to this shelf is minimal because littoral drift is blocked to the north by Tomales Bay and Tomales Point, and to the south by the Point Reyes headland. Circulation over the continental shelf in the map area (and in the broader northern California region) is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. As a result, net flow over the continental shelf can be more southerly during the spring and summer and more northerly during the fall and winter. Throughout the year, this part of the central California coast is exposed to four wave climate regimes&mdash;the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months (typically November through March), with wave heights at offshore buoys ranging from 2 to 10 m and wave periods ranging from 10 to 25 s. During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore Central America. Characteristically, these swells have smaller wave heights (0.3 to 3 m) and similarly long periods (range 10 to 25 s). Northwest wind waves affect the coast throughout the year, while local wind waves are most common from October to April. These two wind-wave regimes typically have wave heights of 1 to 4 m and short periods (3 to 10 s). Potential marine benthic habitats in the Offshore of Tomales Point map area range from unconsolidated continental-shelf sediment, to rocky continental-shelf substrate, to unconsolidated estuary sediments. Rocky-shelf outcrops and rubble are considered to be promising potential habitats for rockfish and lingcod, both of which are recreationally and commercially important species. Dynamic bedforms, such as the sand waves at the mouth of Tomales Bay, are considered potential foraging habitat for juvenile lingcod and possibly migratory fishes, as well as for forage fish such as Pacific sand lance.

California↗

Geometeorological data collected by the USGS Desert Winds Project at Gold Spring, Great Basin desert, northeastern Arizona, 1979-1992

The primary purpose of the Desert Winds Project (DWP) is to obtain high-resolution meteorological data and related surface geological and vegetation data for natural (e.g., uncultivated) desert sites where wind is or has been a major erosive or depositional force. The objectives are twofold: (1) to provide the detailed field measurements needed to carry out quantitative studies of wind as an agent of surface geologic change; and (2) to establish a baseline for defining the 'normal' range of climatic conditions that can be expected to occur on a decadal time scale, in areas considered representative of the major American deserts. The Gold Spring locality was selected to represent that part of the Great Basin Desert that extends into northeastern Arizona. The long-term goal for acquiring and analyzing the Desert Winds Project data is to use them to address problems of land resource degradation by wind, whether resulting from climatic variation aridification) or human activities (desertification), or both (see techinfo.doc).

Arizona↗

Geology of the Southern Guadalupe Mountains, Texas

This report deals with an area of 425 square miles in the western part of Texas, immediately south of the New Mexico line. The area comprises the south end of the Guadalupe Mountains and the adjacent part of the Delaware Mountains; it includes the highest peaks in the State of Texas. The area is a segment of a large mountain mass that extends 50 miles or more northward and southward. The report describes the geology of the area, that is, the nature of its rocks, tectonics, and surface features, and the evidence that they give as to the evolution of the area through geologic time. Incidental reference is made to the geology of surrounding regions in order to place the area in its environment. The Permian system of the southwestern United States has been until recently one of the intriguing but little known subjects of American stratigraphy. In the latter half of the nineteenth century after the western. United States was settled, the "red bed" sections of the Permian were studied and reported on by many geologists, but up to 1920 the existence of a contemporaneous marine sequence in western Texas and southeastern New Mexico was little appreciated. Since that year the discovery of extensive oil fields and potash beds in this region gave an impetus to the study of the Permian rocks, and furnished the geologist with records of hundreds of drill holes from which to deduce the nature of the strata not exposed at the surface. At the same time geologists have studied the rocks in the outcropping areas, and have compared them with the strata encountered by drilling. Much remains to be done in order to understand the history of Permian time in the region. The physical and chemical conditions that caused. the deposition of .the various and often complexly related deposits need to be better understood. More of the fossils of the rich and interesting marine faunas should be described, and the relations of the fossils to their environments should be determined. Further, a satisfactory scheme of correlation is needed, and also a subdivision into series that will express the contemporaneity of strata in different areas. One useful contribution to the solution of these problems is the detailed study of sequences of rocks exposed at the surface in the different mountain ranges of Texas and New Mexico. This report deals with one such sequence of rocks in western Texas, the one exposed in the southern Guadalupe Mountains (fig. 1). Here, the Permian rocks are magnificently exposed, to a thickness of about 4,000 feet (pl. 1). They are all of marine origin, and belong to the middle part of the system, with the base concealed and the top absent. Overlying and underlying beds, however, are found in nearby areas.

Texas↗

Bulletin of the United States Geological and Geographical Survey of the Territories: Volume IV, Number 3

Table of Contents ART. XXV.----Field-notes on Birds observed in Dakota and Montana along the Forty-ninth Parallel during the seasons of 1873 and 1874. By Dr. Elliott Coues, U.S.A., late Surgeon and Naturalist U.S. Northern Boundary Commission.....545-662 ART. XXVI.----Notes on a Collection of Fishes from the Rio Grande, at Brownsville, Texas-Continued. By D.S. Jordan, M.D......663-668 ART. XXVII.---Preliminary Studies on the North American Pyralidae. I. By A.R. Grote..... 669-706 ART. XXVIII.--Paleontological Papers No.6: Descriptions of New Species of Invertebrate Fossils from the Laramie Group. By C.A. White, M.D......707-720 ART. XXIX.----Paleontological Papers No.7: On the Distribution of Molluscan Species in the Laramie Group. By C. A. White, M.D......721-724 ART. XXX.-----On some Dark Shale recently discovered below the Devonian Limestones, at Independence, Iowa\; with a Notice of its Fossils and Description of New Species. By S. Calvin, Professor of Geology, State University of Iowa.....725-730 ART. XXXI.----On the Mineralogy of Nevada. By W.J. Hoffman, M.D......731-745

Report↗

The case for planetary sample return missions

The essential role of planetary sample studies in exploration of the solar system has been well established “Drake et al., 1987”. As part of the larger pursuit of comparative planetology, samples of other rocky planets (Mercury, Venus, Mars), planetary satellites, asteroids, and comets should reveal much about the materials and processes that formed Earth. In that context, Mars is an especially appealing sample target because of its distinctive, Earth‐like characteristics. Here, we review the scientific objectives and justifications for collecting documented samples of Mars and returning them to Earth for laboratory study. A Mars sample‐return mission will be technologically challenging but represents the only way to acquire definitive knowledge about formation of the planet, its geologic and climatic history, and its potential as a haven of life.

Eos, Transactions, American Geophysical Union↗

Phanerozoic strike-slip faulting in the continental interior platform of the United States: examples from the Laramide Orogen, Midcontinent, and Ancestral Rocky Mountains

The continental interior platform of the United States is that part of the North American craton where a thin veneer of Phanerozoic strata covers Precambrian crystalline basement. N- to NE-trending and W- to NW-trending fault zones, formed initially by Proterozoic/Cambrian rifting, break the crust of the platform into rectilinear blocks. These zones were reactivated during the Phanerozoic, most notably in the late Palaeozoic Ancestral Rockies event and the Mesozoic-Cenozoic Laramide orogeny — some remain active today. Dip-slip reactivation can be readily recognized in cross section by offset stratigraphic horizons and monoclinal fault-propagation folds. Strike-slip displacement is hard to document because of poor exposure. Though offset palaeochannels, horizontal slip lineations, and strain at fault bends locally demonstrate strike-slip offset, most reports of strike-slip movements for interior-platform faults are based on occurrence of map-view belts of en echelon faults and anticlines. Each belt overlies a basement-penetrating master fault, which typically splays upwards into a flower structure. In general, both strike-slip and dip-slip components of displacement occur in the same fault zone, so some belts of en echelon structures occur on the flanks of monoclinal folds. Thus, strike-slip displacement represents the lateral component of oblique fault reactivation; dip-slip and strike-slip components are the same order of magnitude (tens of metres to tens of kilometres). Effectively, faults with strike-slip components of displacement act as transfers accommodating jostling of rectilinear crustal blocks. In this context, the sense of slip on an individual strike-slip fault depends on block geometry, not necessarily on the trajectory of regional σ 1 . Strike-slip faulting in the North American interior differs markedly from that of southern and central Eurasia, possibly because of a contrast in lithosphere strength. Weak Eurasia strained significantly during the Alpine-Himalayan collision, forcing crustal blocks to undergo significant lateral escape. The strong North American craton strained relatively little during collisional-convergent orogeny, so crustal blocks underwent relatively small displacements.

Geological Society Special Publication↗

Procedures for developing multi-period response spectra at non-conterminous United States sites

This study complements proposals to the Provisions Update Committee of the Building Seismic Safety Council that would incorporate multi-period response spectra (MPRS) in the 2020 edition of the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (2020 NEHRP Provisions) and related proposals to the ASCE 7-22 Seismic Subcommittee of the American Society of Civil Engineers for incorporation of MPRS in ASCE Standard, ASCE/SEI 7-22, Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-22). Ultimately, the intent is that the proposed MPRS and related design requirements of ASCE 7-22 would be adopted, by reference, as part of the 2024 International Building Code. The technical basis and associated methods herein enable the U.S. Geological Survey (USGS) to develop MPRS for sites in non-conterminous U.S. regions for which seismic hazard analyses have not yet been updated by the USGS to fully define all 22 periods and eight site classes of interest in the MPRS related proposals for the 2020 NEHRP Provisions and ASCE 7-22. These regions include Alaska, Hawaii, Guam and the Northern Mariana Islands, Puerto Rico and the U.S. Virgin Islands, and American Samoa. The methods developed can be used to derive MPRS using only the three currently available ground motion parameters S S , S 1 , and T L for all nonconterminous United States regions of interest. The methods include models that characterize generic shapes of Risk-Targeted Maximum Considered Earthquake (MCE R ) ground motions as a function of these three parameters. For deriving MPRS that represent probabilistic MCE R ground motions, models are based on statistical analyses of large sample sets of probabilistic MCE R response spectra for Western United States (WUS) and Cascadia sites in California, Oregon, Washington (including Puget Sound), Idaho, and Nevada. For deriving MPRS that represent deterministic MCE R ground motions, models are based on sets of deterministic MCE R response spectra calculated using WUS shallow crustal ground motion models for earthquake magnitudes and shaking levels typical of sites governed by deterministic MCE R ground motions.

Alaska, American Samoa, Hawaii, Guam and the North↗

Clockwise rotation and implications for northward drift of the western Transverse Ranges from paleomagnetism of the Piuma Member, Sespe Formation, near Malibu, California

New paleomagnetic results from mid-Tertiary sedimentary beds in the Santa Monica Mountains reinforce the evidence for large-scale rotation of the western Transverse Ranges, and anisotropy measurements indicate that compaction-induced inclination flattening may resolve a long-standing controversy regarding the original paleolatitude of the rotated block. Previously published paleomagnetic data indicate that post-Oligocene rotation amounts to 70°–110° clockwise, affecting the Channel Islands, Santa Monica Mountains, and Santa Ynez Mountains. The Sespe Formation near Malibu consists of a lower member dominated by nonmarine sandstone and conglomerate and an upper section, the Piuma Member, which consists of gray-red sandstone and mudstone interbedded with minor tuff and limestone beds. The Piuma Member has a paleomagnetic pole at 36.6°N, 326.7°E (A 95min = 5.0°, A 95max = 9.6°), obtained by thermal demagnetization of 34 oriented cores from Oligocene and early Miocene beds. After correcting for plunge of the geologic structure, the data are consistent with significant clockwise rotation (77° ± 7°) of the region relative to stable North America. Rotation of the western Transverse Ranges is generally viewed as a consequence of Pacific–North American plate interactions after 28 Ma, when east–west subduction gave way to northwest transform motion in southern California. Inclinations from the Piuma study indicate a paleolatitude anomaly of 11° ± 7° and are consistent with a mean northward drift that exceeds generally accepted San Andreas fault displacement by a factor of 3. However, sedimentary inclination error may accentuate the anomaly. Anisotropy of isothermal remanent magnetization indicates inclination flattening of approximately 8°, and correction for the effect reduces the paleolatitude anomaly to 5.3° ± 5.8°. Compaction may explain the inclination flattening in these sedimentary rocks, but the process does not adequately explain lower-than-expected inclinations found in previous studies of Miocene volcanic rocks of the western Transverse Ranges.

Geochemistry, Geophysics, Geosystems↗