USGS Science⌕ Search

SEARCH · USGS Science

Results for “Test”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
USGS1957

Core logs from two test holes near Kramer, San Bernardino County, California

Between July 1954 and May 1955 two test holes were drilled near Kramer Calif., on the Mojave Desert. Four Corners test hole 1 was drilled in sec. 20 T. 10 N., R. 6 W., San Bernardino base line and meridian, to a depth of 1,561 feet in a basin filled with Quaternary and Tertiary sediments. The core is predominantly sand and conglomerate composed of mostly unweathered quartz monzonite debris. Four Corners test hole 2 was drilled in sec. 5, T. 10 N., R. 8 W., in a separate sediment-filled basin. The core from this hole is less consolidated and more weathered. It is predominantly clay, silt, sand, and gravel composed of quartz monzonitic and volcanic material. Detailed logs of the cores are given in this report.

Bulletin↗
USGS2010

Geographic information system datasets of regolith-thickness data, regolith-thickness contours, raster-based regolith thickness, and aquifer-test and specific-capacity data for the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado

These datasets were compiled in support of U.S. Geological Survey Scientific-Investigations Report 2010-5082-Hydrogeology and Steady-State Numerical Simulation of Groundwater Flow in the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado. The datasets were developed by the U.S. Geological Survey in cooperation with the Lost Creek Ground Water Management District and the Colorado Geological Survey. The four datasets are described as follows and methods used to develop the datasets are further described in Scientific-Investigations Report 2010-5082: (1) ds507_regolith_data: This point dataset contains geologic information concerning regolith (unconsolidated sediment) thickness and top-of-bedrock altitude at selected well and test-hole locations in and near the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado. Data were compiled from published reports, consultant reports, and from lithologic logs of wells and test holes on file with the U.S. Geological Survey Colorado Water Science Center and the Colorado Division of Water Resources. (2) ds507_regthick_contours: This dataset consists of contours showing generalized lines of equal regolith thickness overlying bedrock in the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado. Regolith thickness was contoured manually on the basis of information provided in the dataset ds507_regolith_data. (3) ds507_regthick_grid: This dataset consists of raster-based generalized thickness of regolith overlying bedrock in the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado. Regolith thickness in this dataset was derived from contours presented in the dataset ds507_regthick_contours. (4) ds507_welltest_data: This point dataset contains estimates of aquifer transmissivity and hydraulic conductivity at selected well locations in the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado. This dataset also contains hydrologic information used to estimate transmissivity from specific capacity at selected well locations. Data were compiled from published reports, consultant reports, and from well-test records on file with the U.S. Geological Survey Colorado Water Science Center and the Colorado Division of Water Resources.

Data Series↗
USGS2011

Drilling a deep geologic test well at Hilton Head Island, South Carolina

The U.S. Geological Survey, in cooperation with the South Carolina Department of Health and Environmental Control (SCDHEC), is drilling a deep geologic test well at Hilton Head Island, S.C. The test well is scheduled to run between mid-March and early May 2011. When completed, the well will be about 1,000 feet deep. The purpose of this test well is to gain knowledge about the regional-scale Floridan aquifer, an important source of groundwater in the Hilton Head area. Also, cores obtained during drilling will enable geologists to study the last 60 million years of Earth history in this area.

Alabama, Florida, Georgia, Mississippi, South Caro↗
USGS2000

Estimation of hydraulic parameters from an unconfined aquifer test conducted in a glacial outwash deposit, Cape Cod, Massachusetts

An aquifer test conducted in a sand and gravel, glacial outwash deposit on Cape Cod, Massachusetts was analyzed by means of a model for flow to a partially penetrating well in a homogeneous, anisotropic unconfined aquifer. The model is designed to account for all significant mechanisms expected to influence drawdown in observation piezometers and in the pumped well. In addition to the usual fluid-flow and storage processes, additional processes include effects of storage in the pumped well, storage in observation piezometers, effects of skin at the pumped-well screen, and effects of drainage from the zone above the water table. The aquifer was pumped at a rate of 320 gallons per minute for 72-hours and drawdown measurements were made in the pumped well and in 20 piezometers located at various distances from the pumped well and depths below the land surface. To facilitate the analysis, an automatic parameter estimation algorithm was used to obtain relevant unconfined aquifer parameters, including the saturated thickness and a set of empirical parameters that relate to gradual drainage from the unsaturated zone. Drainage from the unsaturated zone is treated in this paper as a finite series of exponential terms, each of which contains one empirical parameter that is to be determined. It was necessary to account for effects of gradual drainage from the unsaturated zone to obtain satisfactory agreement between measured and simulated drawdown, particularly in piezometers located near the water table. The commonly used assumption of instantaneous drainage from the unsaturated zone gives rise to large discrepancies between measured and predicted drawdown in the intermediate-time range and can result in inaccurate estimates of aquifer parameters when automatic parameter estimation procedures are used. The values of the estimated hydraulic parameters are consistent with estimates from prior studies and from what is known about the aquifer at the site. Effects of heterogeneity at the site were small as measured drawdowns in all piezometers and wells were very close to the simulated values for a homogeneous porous medium. The estimated values are: specific yield, 0.26; saturated thickness, 170 feet; horizontal hydraulic conductivity, 0.23 feet per minute; vertical hydraulic conductivity, 0.14 feet per minute; and specific storage, 1.3x10-5 per foot. It was found that drawdown in only a few piezometers strategically located at depth near the pumped well yielded parameter estimates close to the estimates obtained for the entire data set analyzed simultaneously. If the influence of gradual drainage from the unsaturated zone is not taken into account, specific yield is significantly underestimated even in these deep-seated piezometers. This helps to explain the low values of specific yield often reported for granular aquifers in the literature. If either the entire data set or only the drawdown in selected deep-seated piezometers was used, it was found unnecessary to conduct the test for the full 72-hours to obtain accurate estimates of the hydraulic parameters. For some piezometer groups, practically identical results would be obtained for an aquifer test conducted for only 8-hours. Drawdowns measured in the pumped well and piezometers at distant locations were diagnostic only of aquifer transmissivity.

Massachusetts↗
USGS2001

Vertical-deformation, water-level, microgravity, geodetic, water-chemistry, and flow-rate data collected during injection, storage, and recovery tests at Lancaster, Antelope Valley, California, September 1995 through September 1998

A series of freshwater injection, storage, and recovery tests were conducted from September 1995 through September 1998 to evaluate the feasibility of artificially recharging ground water in the Lancaster area of the Antelope Valley, California. The tests used two production wells at a well field located in the southern part of the city of Lancaster. Monitoring networks were established at or in the vicinity of the test site to measure vertical deformation of the aquifer system, water-level fluctuations, land-surface deformation, water chemistry, and injection well flow rates during water injection and recovery. Data presented in this report were collected from a dual extensometer; 10 piezometers; 1 barometer; 27 active or abandoned production wells; 31 gravity stations; 124 bench marks; 1 permanent and 1 temporary continuous Global Positioning System (GPS) station; 3 tiltmeters; and 2 electromagnetic flowmeters from September 1995 through September 1998. This report discusses the location and design of the monitoring networks and the methods used to collect and process the data, and presents the data in tables and graphs.

Open-File Report↗
USGS2004

Analysis of minimally disruptive brief pumping tests of domestic wells completed in bedrock in the Appalachian Plateau of New York

One normal episode of pump operation in domestic wells drilled into bedrock in New York typically lasts about 1 minute and lowers the water level about 1 meter. Measurement of water levels in the pumped well before and during pumping and recovery can be completed in 2 to 3 hours and requires negligible disturbance of the well, so can be easily arranged. Such a test involves less turbulent flow or well loss than longer tests, and can be conveniently analyzed by a new computer program. Tests of 25 wells completed in shale, siltstone, or sandstone in the Appalachian Plateau of New York have been analyzed by this program and by two alternative methods, all of which yield similar transmissivity values and are equally insensitive to storativity.

New York↗
USGS2006

Magnetotelluric Data, Rainier Mesa/Shoshone Mountain, Nevada Test Site, Nevada

Introduction: The United States Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) at their Nevada Site Office (NSO) are addressing ground-water contamination resulting from historical underground nuclear testing through the Environmental Management (EM) program and, in particular, the Underground Test Area (UGTA) project. During 2005, the U.S. Geological Survey (USGS), in cooperation with the DOE and NNSA-NSO, collected and processed data from twenty-six magnetotelluric (MT) and audio-magnetotelluric (AMT) sites at the Nevada Test Site. The 2005 data stations were located on and near Rainier Mesa and Shoshone Mountain to assist in characterizing the pre-Tertiary geology in those areas. These new stations extend the area of the hydrogeologic study previously conducted in Yucca Flat. The MT data presented in this report will help refine what is known about the character, thickness, and lateral extent of pre Tertiary confining units. Subsequent interpretation will include a three dimensional (3 D) character analysis and a two-dimensional (2 D) resistivity model. The purpose of this report is to release the MT sounding data. No interpretation of the data is included here.

Open-File Report↗
USGS2007

Magnetotelluric Data, Mid Valley, Nevada Test Site, Nevada

Introduction The United States Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) at their Nevada Site Office (NSO) are addressing ground-water contamination resulting from historical underground nuclear testing through the Environmental Management (EM) program and, in particular, the Underground Test Area (UGTA) project. One issue of concern is the nature of the somewhat poorly constrained pre-Tertiary geology and its effects on ground-water flow. Ground-water modelers would like to know more about the hydrostratigraphy and geologic structure to support a hydrostratigraphic framework model that is under development for the Rainier Mesa/Shoshone Mountain Corrective Action Unit (CAU). During 2003, the U.S. Geological Survey (USGS), in cooperation with the DOE and NNSA-NSO, collected and processed data at the Nevada Test Site in and near Yucca Flat (YF) to help define the character, thickness, and lateral extent of the pre-Tertiary confining units. We collected 51 magnetotelluric (MT) and audio-magnetotelluric (AMT), stations for that research. In early 2005 we extended that research with 26 additional MT data stations, located on and near Rainier Mesa and Shoshone Mountain (RM-SM). The new stations extended the area of the hydrogeologic study previously conducted in Yucca Flat. This work was done to help refine what is known about the character, thickness, and lateral extent of pre-Tertiary confining units. In particular, a major goal was to define the upper clastic confining unit (UCCU). The UCCU is comprised of late Devonian to Mississippian siliciclastic rocks assigned to the Eleana Formation and Chainman Shale. The UCCU underlies the Yucca Flat area and extends westward towards Shoshone Mountain, southward to Buckboard Mesa, and northward to Rainier Mesa. Late in 2005 we collected another 14 MT stations in Mid Valley and in northern Yucca Flat basin. That work was done to better determine the extent and thickness of the UCCU near the southeastern RM-SM CAU boundary with the southwestern YF CAU, and also in the northern YF CAU. The purpose of this report is to release the MT data at those 14 stations. No interpretation of the data is included here.

Open-File Report↗
USGS2009

Cone penetration test and soil boring at the Bayside Groundwater Project Site in San Lorenzo, Alameda County, California

Aquifer-system deformation associated with ground-water-level changes is being investigated cooperatively by the U.S. Geological Survey (USGS) and the East Bay Municipal Utility District (EBMUD) at the Bayside Groundwater Project (BGP) near the modern San Francisco Bay shore in San Lorenzo, California. As a part of this project, EBMUD has proposed an aquifer storage and recovery (ASR) program to store and recover as much as 3.78x104 m3/d of water. Water will be stored in a 30-m sequence of coarse-grained sediment (the 'Deep Aquifer') underlying the east bay alluvium and the adjacent ground-water basin. Storing and recovering water could cause subsidence and uplift at the ASR site and adjacent areas because the land surface will deform as aquifers and confining units elastically expand and contract with ASR cycles. The Deep Aquifer is overlain by more than 150 m of clayey fine-grained sediments and underlain by comparable units. These sediments are similar to the clayey sediments found in the nearby Santa Clara Valley, where inelastic compaction resulted in about 4.3 m of subsidence near San Jose from 1910 to 1995 due to overdraft of the aquifer. The Deep Aquifer is an important regional resource, and EBMUD is required to demonstrate that ASR activities will not affect nearby ground-water management, salinity levels, or cause permanent land subsidence. Subsidence in the east bay area could induce coastal flooding and create difficulty conveying winter storm runoff from urbanized areas. The objective of the cooperative investigation is to monitor and analyze aquifer-system compaction and expansion, as well as consequent land subsidence and uplift resulting from natural causes and any anthropogenic causes related to ground-water development and ASR activities at the BGP. Therefore, soil properties related to compressibility (and the potential for deformation associated with ground-water-level changes) are of the most concern. To achieve this objective, 3 boreholes were drilled at the BGP for the purpose of monitoring pore-fluid pressure changes and aquifer-system deformation. One 308-m deep borehole contains six piezometers, the other two boreholes are 182 and 299 m deep and contain a dual-stage extensometer. To investigate the physical properties of the sediments, two phases of subsurface exploration were conducted. In the first phase, a USGS drilling crew obtained numerous core samples, 5.8 cm in diameter by 1.5 m long. The samples were extracted between July 28, 2006, and August 5, 2006; nine samples were tested for this study at the USGS soils laboratory in Menlo Park, California. Phase two began on June 22, 2006, when a seismic cone penetration test (SCPT) sounding was made to a depth of 32.3 m. Additional field work was completed May 8, 2007, with a hollow-stem auger boring that took continuous 9.8-cm-diameter samples from the depth interval of 6.1 to 10.7 m to supplement poor recovery from the first phase of sampling. These samples were also tested in the soils laboratory at the USGS.

California↗
USGS2009

Estimation of Unsaturated Zone Traveltimes for Rainier Mesa and Shoshone Mountain, Nevada Test Site, Nevada, Using a Source-Responsive Preferential-Flow Model

Traveltimes for contaminant transport by water from a point in the unsaturated zone to the saturated zone are a concern at Rainier Mesa and Shoshone Mountain in the Nevada Test Site, Nevada. Where nuclear tests were conducted in the unsaturated zone, contaminants must traverse hundreds of meters of variably saturated rock before they enter the saturated zone in the carbonate rock, where the regional groundwater system has the potential to carry them substantial distances to a location of concern. The unsaturated-zone portion of the contaminant transport path may cause a significant delay, in addition to the time required to travel within the saturated zone, and thus may be important in the overall evaluation of the potential hazard from contamination. Downward contaminant transport through the unsaturated zone occurs through various processes and pathways; this can lead to a broad distribution of contaminant traveltimes, including exceedingly slow and unexpectedly fast extremes. Though the bulk of mobile contaminant arrives between the time-scale end members, the fastest contaminant transport speed, in other words the speed determined by the combination of possible processes and pathways that would bring a measureable quantity of contaminant to the aquifer in the shortest time, carries particular regulatory significance because of its relevance in formulating the most conservative hazard-prevention scenarios. Unsaturated-zone flow is usually modeled as a diffusive process responding to gravity and pressure gradients as mediated by the unsaturated hydraulic properties of the materials traversed. The mathematical formulation of the diffuse-flow concept is known as Richards' equation, which when coupled to a solute transport equation, such as the advection-dispersion equation, provides a framework to simulate contaminant migration in the unsaturated zone. In recent decades awareness has increased that much fluid flow and contaminant transport within the unsaturated zone takes place as preferential flow, faster than would be predicted by the coupled Richards' and advection-dispersion equations with hydraulic properties estimated by traditional means. At present the hydrologic community has not achieved consensus as to whether a modification of Richards' equation, or a fundamentally different formulation, would best quantify preferential flow. Where the fastest contaminant transport speed is what needs to be estimated, there is the possibility of simplification of the evaluation process. One way of doing so is by a two-step process in which the first step is to evaluate whether significant preferential flow and solute transport is possible for the media and conditions of concern. The second step is to carry out (a) a basic Richards' and advection-dispersion equation analysis if it is concluded that preferential flow is not possible or (b) an analysis that considers only the fastest possible preferential-flow processes, if preferential flow is possible. For the preferential-flow situation, a recently published model describable as a Source-Responsive Preferential-Flow (SRPF) model is an easily applied option. This report documents the application of this two-step process to flow through the thick unsaturated zones of Rainier Mesa and Shoshone Mountain in the Nevada Test Site. Application of the SRPF model involves distinguishing between continuous and intermittent water supply to preferential flow paths. At Rainier Mesa and Shoshone Mountain this issue is complicated by the fact that contaminant travel begins at a location deep in the subsurface, where there may be perched water that may or may not act like a continuous supply, depending on such features as the connectedness of fractures and the nature of impeding layers. We have treated this situation by hypothesizing both continuous and intermittent scenarios for contaminant transport to the carbonate aquifer and reporting estimation of the fastest speed for both of th

Open-File Report↗
USGS2019

Effectiveness of fish screens in protecting lamprey (Entosphenus and Lampetra spp.) ammocoetes—Pilot testing of variable screen angle

Thousands of screened water diversions throughout the Columbia River Basin of the Pacific Northwest are sources of entrainment (unintended diversion into an unsafe passage route), injury, and mortality for a range of fish species and screening criteria have been developed to reduce and mitigate these effects. Large knowledge gaps exist concerning the potential effects of these screens on juvenile and larval lampreys ( Entosphenus and Lampetra spp. ) that may be particularly vulnerable to screening effects owing to their small size, unique morphology, and poor swimming performance. The few studies that have evaluated screen impacts for lampreys have compared common screen materials in a laboratory setting using a large, recirculating flume, and have reported that screen size and material influence the risk of entrainment. We compared entrainment rate, impingement rate and duration, injury rate, and delayed (24-hour) mortality of larval lamprey (ammocoetes) exposed to two screen angles. A 20-degree screen was tested because it is a common configuration, and a 12-degree screen was selected to represent a screen more parallel to flow than the 20-degree screen. We included juvenile rainbow trout ( Oncorhynchus mykiss ) in tests for both screen angles so that any screen interaction improvements observed for lamprey could be considered in light of their effect on salmonids ( Oncorhynchus spp. ). Study fish were released singly into the flume at two locations: near-screen (SCR) releases at about 30 centimeters upstream of the screen and mid-channel (MID) releases at about 1.4 meters upstream of the screen. We completed 120 screen trials with ammocoetes and 117 screen trials with juvenile tout during April–May 2018. Ammocoetes had short mean trial durations (less than 30 seconds) and were most frequently bypassed. Over one-half of the ammocoetes briefly (for less than 1 second) contacted the screen. Rates of screen contact were similar between the two screen angles, but higher for SCR releases (about 83–90 percent) than for MID releases (about 28–44 percent). Screen impingements were not common (8.3 percent of ammocoetes) and did not result in significant injury or delayed mortality. The final logistic regression model showed that screen angle and release location did not significantly affect whether ammocoetes were bypassed. The size of the lamprey, expressed as mass or length, was the only significant predictor of fate. We noted an estimated 4.7-percent increase in the odds of being bypassed for every 1-milligram increase in ammocoete mass and a 49-percent increase in the odds of being bypassed for every 1-millimeter increase in length. Trout did not experience negative effects with the 12-degree screen; they had short mean trial durations (less than 40 seconds) and limited contact with the screens (11.1 percent of trout), were most commonly bypassed, and none were entrained. Screen angle and release location were not significant drivers of fate for trout. The 12-degree and 20-degree screens performed comparably for both lamprey and trout and effectively bypassed these fishes. Some metrics showed advantages for the 12-degree screen, suggesting that screens installed more parallel to flow might warrant further testing.

Columbia River Basin↗
USGS2020

A standard operating procedure for the preparation of purposely killed juvenile salmon used to test survival model assumptions

This document describes a standard operating procedure (SOP) for the preparation of purposely killed juvenile salmon, implanted with telemetry transmitters, to be released into rivers, lakes, or streams to test one of the survival model assumptions. Procedures for releases of purposely killed fish (hereinafter dead fish releases) were developed by staff from the U.S. Geological Survey’s Columbia River Research Laboratory, on the basis of laboratory experiments and practical experience with telemetry studies in the Columbia River Basin. Initially, we used extended exposure to high dose anesthetic baths to euthanize fish for dead fish releases. This approach was selected on the basis of euthanization procedures described in the literature for studies that required an effective and rapid procedure, such as stress physiology assessments. Ultimately, this technique was deemed insufficient because detection records suggested that some fish seemed to revive and continue their migration with limited effect. That is, the detection histories of dead fish were very similar to those of live fish. To overcome this challenge, we adapted our procedures to require a combination of euthanization procedures on individual fish to ensure that there was no opportunity for revival. A combination of euthanization procedures for dead fish releases was used in one study in Germany. This SOP has been used by the U.S. Geological Survey to test survival model assumptions in several field studies and has consistently performed well. In addition, limited laboratory tests were completed to ensure that no live juvenile salmon were found in holding tanks for 24 hours following the procedures described in this SOP.

Open-File Report↗
USGS1948

Results of pumping tests on artesian wells in the Milwaukee - Waukesha area, Wisconsin

As a result of a bill passed by the Wisconsin State Legislature in 1945, ground-water investigations in Wisconsin have been under way since February 1946 under the terms of an agreement between the U. S. Geological Survey and the University of Wisconsin. Pumping tests on wells that yield water from the Ordovician and Cambrian sandstones underlying the Milwaukee-Waukesha area have been made as a part a larger regional investigation. The purpose of the tests has been to determine the water-bearing characteristics of the aquifer. These characteristics, the coefficients of transmissibility and storage, are used to determine the effect on water levels caused by changes in the rate of withdrawal from the aquifer. Average coefficients of transmissibility and storage determined from the results of 47 pumping tests at five different locations are 23,800 gallons a day per foot, and 0.00039, respectively. The amount of drawdown in the water level at any point caused by pumping a well for a given length of time may be computed by the nonequilibrium formula, using the coefficients and correcting for the effects of boundaries and of any changes in the character of the aquifer. Further study of the geology is needed to determine the location of the recharge area, the location of possible boundaries, and changes in the character of the aquifer. Collection of water-level and pumpage data is continuing and will serve as a check of the computations using the coefficients of transmissibility and storage.

Wisconsin↗
USGS1965

Ground-water data of selected test holes and wells along the Arkansas river in Muskogee County, Oklahoma

The data in this report were collected during the period 1958-64 by the U.S. Geological Survey in cooperation with the U.S. Army, Corps of Engineers, as part of a comprehensive study of the ground-water resources of the alluvium along the Arkansas and Verdigris Rivers between Moffett and Catoosa, Oklahoma (fig. 1). The purpose of this report is to make the hydrologic data obtained during the study of ground water in the alluvium along the Arkansas River in Muskogee County readily available to the public. The data in this report should be useful in predicting geologic and hydrologic conditions when drilling new wells. Table 1 gives information on the sizes, depths, yields, and other characteristics of wells in the area. The table also provides a key to the additional information for each well site given in tables 2 through 6. Table 2 gives logs for the materials penetrated at test holes and wells in the report area; table 3 gives depths to water measured in wells; table 4 includes chemical analyses of water from wells; table 5 gives laboratory determinations of particle-size distribution of earth samples collected from test holes and wells; and table 6 gives coefficients of permeability and other hydrologic properties of earth samples from the selected test holes. Similar data for Sequoyah County, LeFlore-Haskell Counties, and Wagoner-Rogers Counties are available in other open-file reports. An interpretive report, 'Hydrology of the alluvium of the Arkansas River, Muskogee, Oklahoma, to Fort Smith, Arkansas,' by Harry H. Tanaka and Jerrald R. Hollowell will be published as U.S. Geological Survey Water-Supply Paper 1809-T.

Open-File Report↗
USGS1965

Ground-water data of selected test holes and wells along the Verdigris River in Wagoner and Rogers Counties, Oklahoma

The data in this report were collected during the period 1958-64 by the U.S. Geological Survey in cooperation with the U.S. Army, Corps of Engineers, as part of a comprehensive study of the ground-water resources of the alluvium along the Arkansas and Verdigris Rivers between Moffett and Catoosa, Oklahoma (fig. 1). The purpose of this report is to make the hydrologic data obtained during the study of ground water in the alluvium along the Verdigris River in Wagoner and Rogers Counties readily available to the public. The data in this report should be useful in predicting geologic and hydrologic conditions when drilling new wells. Table 1 gives information on the sizes, depths, yields, and other characteristics of wells in the area. The table also provides a key to the additional information for each well site given in tables 2 through 6. Table 2 gives logs for the materials penetrated at test holes and wells in the report area; table 3 gives depths to water measured in wells; table 4 includes chemical analyses of water from wells; table 5 gives laboratory determinations of particle-size distribution of earth samples collected from test holes and wells; and table 6 gives coefficients of permeability and other hydrologic properties of earth samples from the selected test holes. Similar data for Sequoyah County, LeFlore-Haskell Counties, and Muskogee County are available in other open-file reports. An interpretive report, 'Hydrology of the alluvium of the Arkansas River, Muskogee, Oklahoma, to Fort Smith, Arkansas,' by Harry H. Tanaka and Jerrald R. Hollowell will be published as U.S. Geological Survey Water-Supply Paper 1809-T.

Oklahoma↗
USGS1965

Ground-water data of selected test holes and wells along the Arkansas River in Sequoyah County, Oklahoma

The data in this report were collected during the period 1958-64 by the U.S. Geological Survey in cooperation with the U.S. Army, Corps of Engineers, as part of a comprehensive study of the ground-water resources of the alluvium along the Arkansas and Verdigris Rivers between Moffett and Catoosa, Oklahoma (fig. 1). The purpose of this report is to make the hydrologic data obtained during the study of ground water in the alluvium along the Arkansas River in Sequoyah County readily available to the public. The data in this report should be useful in predicting geologic and hydrologic conditions when drilling new wells. Table 1 gives information on the sizes, depths, yields, and other characteristics of wells in the area. The table also provides a key to the additional information for each well site given in tables 2 through 6. Table 2 gives logs for the materials penetrated at test holes and wells in the report area; table 3 gives depths to water measured in wells; table 4 includes chemical analyses of water from wells; table 5 gives laboratory determinations of particle-size distribution of earth samples collected from test holes and wells; and table 6 gives coefficients of permeability and other hydrologic properties of earth samples from the selected test holes. Similar data for LeFlore-Haskell Counties, Muskogee County, and Wagoner-Rogers Counties are available in other open-file reports. An interpretive report, 'Hydrology of the alluvium of the Arkansas River, Muskogee, Oklahoma, to Fort Smith, Arkansas,' by Harry H. Tanaka and Jerrald R. Hollowell will be published as U.S. Geological Survey Water-Supply Paper 1809-T.

Open-File Report↗
USGS1965

Ground-water data of selected test holes and wells along the Arkansas River in LeFlore and Haskell Counties, Oklahoma

The data in this report were collected during the period 1958-64 by the U.S. Geological Survey in cooperation with the U.S. Army, Corps of Engineers, as part of a comprehensive study of the ground-water resources of the alluvium along the Arkansas and Verdigris Rivers between Moffett and Catoosa, Oklahoma (fig. 1). The purpose of this report is to make the hydrologic data obtained during the study of ground water in the alluvium along the Arkansas River in Le Flore and Haskell Counties readily available to the public. The data in this report should be useful in predicting geologic and hydrologic conditions when drilling new wells. Table 1 gives information on the sizes, depths, yields, and other characteristics of wells in the area. The table also provides a key to the additional information for each well site given in tables 2 through 6. Table 2 gives logs for the materials penetrated at test holes and wells in the report area; table 3 gives depths to water measured in wells; table 4 includes chemical analyses of water from wells; table 5 gives laboratory determinations of particle-size distribution of earth samples collected from test holes and wells; and table 6 gives coefficients of permeability and other hydrologic properties of earth samples from the selected test holes. Similar data for Sequoyah County, Muskogee County, and Wagoner-Rogers Counties are available in other open-file reports. An interpretive report, 'Hydrology of the alluvium of the Arkansas River, Muskogee, Oklahoma, to Fort Smith, Arkansas,' by Harry H. Tanaka and Jerrald R. Hollowell will be published as U.S. Geological Survey Water-Supply Paper 1809-T.

Open-File Report↗
USGS1966

A progress report on the test-well drilling program in the west part of Antelope Valley, California

This progress report presents the results of a test-well drilling program undertaken by the Antelope Valley-East Kern Water Agency and the U.S. Geological Survey in the western part of Antelope Valley, Calif. Eight test wells were drilled by the rotary method, and electric and lithologic logs were made of each well. A water-level-contour map was drawn, based on water-level measurements in the test wells and other wells. On the basis of data from these wells, the Neenach and Randsburg-Mojave faults were located. The concealed trace of another fault, north of the Randsburg-Mojave fault, was postulated from water-level data. This progress report considers the feasibility of utilizing a part of the Antelope Valley ground-water basin as a natural water-storage reservoir. The West Antelope ground-water subunit could probably be used as a large-volume holdover storage reservoir.

California↗