USGS Science⌕ Search

SEARCH · USGS Science

Results for “Reliability Engineering and System Safety (RESS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,692 records · Page 28Linked to original sources
USGS1976

Uranium and trace elements in stream sediments as an exploration tool

More than 45 trace elements have been reported in anomalous amounts in the uranium ores. The specific suite of elements associated with any one uranium deposit varies according to deposit type and geologic province. The primary geochemical halo of uranium and associated trace elements in the host rock, together with secondary dispersion halo in soils and alluvium, offers a potential geochemical exploration target. Sediment from streams near low-grade uranium occurrences in arkosic sandstone of the Denver basin, Colorado, and sediment from streams in the igneous and metamorphic terrace near the Midnite mine of eastern Washington have been analyzed for acid-extractable U, Cu,Pb, Zn, Ni, Co, Fe, Mn, Mo, Cd, Cr, Ag, V, and Se, and for total Fe, Mn, Hg, As, and organic C. The -80 mesh fraction of the alluvium downstream from a small uraniferous limonite occurrence in the Denver basin shows anomalous concentrations of U, Pb, As, Ni, Mo, V, Zn, and Se. Anomalous concentrations of U persist farther downstream (as much as 1,000 m) than any of the trace elements. In another stream system southeast of Denver, above-background levels of U, Pb, As, Zn, V, Fe, and Mn occur near a uranium anomaly (defined by other methods) which has no surface mineralization. In the Midnite mine area, sediments of streams draining prospect areas showed anomalous concentrations of uranium (as much as 10 times background), but no accompanying anomalous trace-element concentrations, although analyses of Midnite mine ores show that a broad suite of trace elements are associated with uranium.

Open-File Report↗
USGS2025

Hydrologic variability and groundwater age of springs in eastern Oregon and northern Nevada, USA

The ecological importance of springs in semiarid regions is far greater than their small size and sparse distribution, yet little is known about the hydrologic functioning of these systems. During 2016–22, 261 springs were visited in the volcanic terrane of eastern Oregon and northern Nevada. When conditions were suitable, measurements of discharge, water temperature, and specific conductance were made, and samples for the analysis of carbon-14, tritium, and water stable isotopes (WSI) were collected. A subset of 60 springs was revisited during different seasons in the same year and during the dry season in multiple years to evaluate variability in discharge, chemistry, and groundwater age. Specific conductance and WSI varied considerably among springs across the study area but were unexpectedly stable across seasons and years at individual springs. Seasonal and interannual variability in spring discharge was related to the residence time of the discharging groundwater. Springs discharging older groundwater (10 3 –10 4 years) had significantly less variability in their discharge compared to springs discharging younger groundwater (10 0 –10 1 years). Variability among springs discharging younger groundwater included cessation of late-summer discharge at 18 % of the repeat-visit springs. A logistic regression model predicted the age of discharging spring water with 89 % accuracy using only the spring latitude, longitude, elevation, and δ 2 H value. This study framework provides a simple, inexpensive, and robust method to provisionally assess the hydrologic behavior of springs having little or no prior information in understudied, semiarid regions across the globe.

Nevada, Oregon↗
USGS2024

Elastic stress coupling between supraglacial lakes

Supraglacial lakes have been observed to drain within hours of each other, leading to the hypothesis that stress transmission following one drainage may be sufficient to induce hydro-fracture-driven drainages of other nearby lakes. However, available observations characterizing drainage-induced stress perturbations have been insufficient to evaluate this hypothesis. Here, we use ice-sheet surface-displacement observations from a dense global positioning system array deployed in the Greenland Ice Sheet ablation zone to investigate elastic stress transmission between three neighboring supraglacial lake basins. We find that drainage of a central lake can place neighboring basins in either tensional or compressional stress relative to their hydro-fracture scarp orientations, either promoting or inhibiting hydro-fracture initiation beneath those lakes. For two lakes located within our array that drain close in time, we identify tensional surface stresses caused by ice-sheet uplift due to basal-cavity opening as the physical explanation for these lakes' temporally clustered hydro-fracture-driven drainages and frequent triggering behavior. However, lake-drainage-induced stresses in the up-flowline direction remain low beyond the margins of the drained lakes. This short stress-coupling length scale is consistent with idealized lake-drainage scenarios for a range of lake volumes and ice-sheet thicknesses. Thus, on elastic timescales, our observations and idealized-model results support a stress-transmission hypothesis for inducing hydro-fracture-driven drainage of lakes located within the region of basal cavity opening produced by the initial drainage, but refute this hypothesis for distal lakes.

JGR Earth Surface↗
USGS2025

Quality of groundwater used for domestic supply in the Gilroy-Hollister basin and surrounding areas, California, 2022

More than 2 million Californians rely on groundwater from domestic wells for drinking-water supply. This report summarizes a 2022 California Groundwater Ambient Monitoring and Assessment Priority Basin Project (GAMA-PBP) water-quality survey of 33 domestic and small-system drinking-water supply wells in the Gilroy-Hollister Valley groundwater basin and the surrounding areas, where more than 20,000 residents are estimated to utilize privately owned domestic wells. The study area includes the Llagas subbasin in the north, the North San Benito subbasin in the south, and the surrounding uplands. The study was focused on groundwater resources used for domestic drinking-water supply, which are mostly drawn from shallower parts of aquifer systems rather than those of groundwater resources used for public drinking-water supply in the same area. This assessment characterized the quality of ambient groundwater in the aquifer before filtration or treatment, rather than the quality of drinking water delivered to the tap. To provide context, the measured concentrations of constituents in groundwater were compared to Federal and California State regulatory and non-regulatory benchmarks for drinking-water quality. A grid-based method was used to estimate the areal proportions of groundwater resources used for domestic drinking wells that have water-quality constituents present at high concentrations (above the benchmark), moderate concentrations (between one-half of the benchmark and the benchmark for inorganic constituents, or between one-tenth of the benchmark and the benchmark for organic constituents), and low concentrations (less than one-half or one-tenth the benchmark for inorganic and organic constituents, respectively). This method provides statistically representative results at the study-area scale and permits comparisons to other GAMA-PBP study areas. In the study area, inorganic constituents in groundwater were greater than regulatory benchmarks (U.S. Environmental Protection Agency [EPA] or State of California maximum contaminant levels [MCLs]) for public drinking-water quality in 24 percent of domestic groundwater resources. The inorganic constituents present at concentrations greater than MCLs for drinking water were nitrate (as nitrogen), barium, chromium, and selenium. Total dissolved solids (TDS) or manganese were present at concentrations greater than the secondary maximum contaminant levels (SMCLs) that the State of California uses as aesthetic-based benchmarks in 48 percent of domestic groundwater resources. No volatile organic compounds or pesticide constituents were present at concentrations greater than regulatory benchmarks. Total coliform bacteria and enterococci were detected in 4 percent of domestic groundwater resources. Per- and polyfluoroalkyl substances (PFAS) were detected in 19 percent of domestic groundwater resources, and 10 percent had concentrations greater than recently enacted (April 2024) EPA MCLs. Physical and chemical factors from natural and anthropogenic sources that could affect the groundwater quality were evaluated using results from statistical testing of associations between constituent concentrations and potential explanatory variables. In this study, relevant physical factors include well construction characteristics, groundwater age, site proximity to groundwater recharge or discharge zones, and potential sources of contamination. Relevant chemical factors include the initial chemistry of the recharge water, the mineralogy of the aquifer sediments, and the subsequent shifts in chemistry as biologic and geologic reactions alter groundwater in the subsurface. Nitrate concentrations were correlated to agricultural land use, distance from the boundary of the Gilroy-Hollister Valley groundwater basin, and the proportion of modern (post-1950s) water captured by the well. Denitrification under anoxic redox conditions can mitigate some nitrate derived from fertilizer application. Total dissolved solids primarily were derived from water-rock interactions with soils and aquifer materials in the study area, but there were high concentrations where agricultural practices contributed additional TDS. Mineralogy of aquifer sediments and rocks also affect barium, selenium, boron, and chromium concentrations in the Gilroy-Hollister Valley groundwater basin. PFAS were positively correlated with urban land use and the proportion of modern water captured by the well.

California↗
USGS2025

What 25+ years of "Did You Feel It" intensities tell us about shaking in California

“When will the Big One happen?” is a question that people often have for earthquake scientists. But while waiting for the “Big One” to occur, people will usually experience frightening or damaging shaking from multiple relatively smaller‐magnitude earthquakes. Given this context, it raises the question: “Where does most of the damage come from?” Could smaller, yet more frequent, earthquakes account for the majority of reported impactful shaking? To explore this question, we consider reports of earthquake damage and felt shaking experiences from a catalog of community‐collected intensity values from the U.S. Geological Survey’s “Did You Feel It?” system. Comparing these intensities to expectations from a ground‐motion model, we find that earthquakes of magnitudes smaller than expected are responsible for most reported intensities of community decimal intensities (CDI) 4.5 and above (moderate and higher shaking intensity levels). (Here “expected value” is meant in its mathematical sense of the mean or equivalently median shaking intensity.) We also present a regional analysis of observed earthquake shaking for specific areas, detailing the maximum intensity experienced within a predetermined area. We identify several instances of M < 4.5 events that generated maximum intensities of CDI > 5 in regions in California surrounding the cities of Eureka, San Francisco, Los Angeles, and San Diego. Our results motivate the need to include smaller‐magnitude earthquakes in communications about earthquake hazard and risk reduction.

California↗
USGS2024

Geospatial PDF map of the compilation of GIS data for the mineral industries and related infrastructure of Africa

Introduction In 2021, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries and related infrastructure of Africa." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of the African region and expand the NMIC's understanding on the impact of mineral industry of African nations in the global economy. The African region, which comprises the independent nations that make up the African continent and its associated islands and dependencies, consists of a total of 58 mineral producing countries. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and development capacity across Africa along with the related infrastructure capable of supporting current (for the reference year 2018) and future extractive industry operations in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries and Related Infrastructure of Africa." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry and related infrastructure GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within Africa.

Open-File Report↗
USGS2026

Surface-wave relocation and characterization of the 2024–2025 dyking episode along the Fentale–Dofen segment of the Ethiopian rift

From late-December 2024 to mid-March 2025, a 50-km-long dyke intrusion triggered over 300 earthquakes (magnitude 4 to 5.9) between Fentale and Dofen volcanoes along the Northern Main Ethiopian Rift. Dyke intrusions periodically occur along the Fentale–Dofen magmatic segment and are an expression of ongoing rift extension. Preliminary analyses using interferometric synthetic aperture radar revealed extensive ground deformation (up to 60 cm), which closely matched the temporal and spatial evolution of surface manifestations and earthquake locations from global catalogues. While global catalogues are critical for real-time monitoring, the precision of locations in remote and or sparsely instrumented regions can be low. In this investigation, we present surface-wave relocation results of the dyking episode that began near Fentale volcano in December 2024. We estimate relative locations using differential traveltimes measured from regional-to-teleseismic distance surface-wave observations of earthquakes reported by the U.S. Geological Survey. Relative relocations reduce the initial region of diffuse seismicity to a 50-km-long narrow band bounding the strike of surface manifestations and the zone of maximum surface deformation. We demonstrate the precision of surface-wave relocations over incremental time periods, capturing the progression of dyking from seismic onset through seismic migration and caldera subsidence. Results showcase the utility of surface-wave relocations in the characterization of dyking episodes and provide complementary insights into the current understanding of the Fentale–Dofen volcanic plumbing system.

Geophysical Journal International↗
USGS2023

Preliminary geologic map of the Southern Santa Rosa Mountains and Borrego Badlands, San Diego County, Southern California

This investigation delineates the geologic framework of an area of 75 square kilometers (km 2 ) located west of the Salton Sea in southern California (fig. 1, on sheet 1). The study area encompasses the south flank of the Santa Rosa Mountains and the eastern part of the Borrego Badlands (sheet 1). In this study area, regionally important stratigraphic and structural elements collectively inform the late Cenozoic geologic evolution of the Anza-Borrego sector of the Salton Trough province. Critical stratigraphic and structural elements in the map area include the following: The well exposed sequence of late Cenozoic, nonmarine sedimentary rocks that filled the Anza-Borrego subbasin (fig. 1) of the Salton Trough; A tectonic boundary that—in the southern Santa Rosa Mountains—separates the sedimentary strata from underlying crystalline rocks of Peninsular Ranges type. This tectonic boundary, named the West Salton Detachment Fault System by Axen and Fletcher (1998), is projected to underlie all late Cenozoic sedimentary strata in the Anza-Borrego subbasin of the Salton Trough; A variety of transpressional, transtensional, and strike-slip structures that have deformed the late Cenozoic sedimentary strata and collectively guided syntectonic and posttectonic depositional events within the Anza-Borrego subbasin of the Salton Trough; and The southeasternmost surface expression of the Clark Fault, a major strand of the dextral San Jacinto Fault Zone. Geologic mapping and analysis for this investigation focused on clarifying geologic relations among these four stratigraphic and structural aspects in the map area.

California↗
USGS2023

Eruptive history within the vicinity of Al Madīnah in northern Harrat Rahat, Kingdom of Saudi Arabia

The northernmost part of the Harrat Rahat volcanic field contains early Pleistocene to Holocene mafic eruptive products within the vicinity of the city of Al Madīnah, Kingdom of Saudi Arabia. A detailed geologic investigation into the eruptive history of a 570 square kilometer (km 2 ) area covering Al Madīnah and the surrounding area has yielded 33 mapped Quaternary volcanic units consisting of lava flows, scoria cones, and shield volcanoes. These eruptive products consist of continental, intraplate alkalic and minor transitional basalts, hawaiites, and a single mugearite that were emplaced from at least 1,014±14 thousand years ago (ka) to a single Holocene eruption in 1256 C.E. Lava flows are generally 10 to 15 kilometers (km) long (but can reach 23 km long), 1 to 3 km wide, and at least 10 meters thick. Most of the mapped units erupted episodically between 400 and 340 ka and 180 and 100 ka. Despite small individual volumes (less than 1 cubic kilometers dense rock equivalent), each unit represents eruption of a distinct magma batch that was strongly influenced by clinopyroxene, olivine, and plagioclase fractionation. Some of these units are interpreted to have undergone magma mixing pre- and (or) syneruptively. Integrating eruption ages, geochemistry, and paleomagnetic data yields evidence that some eruptions were temporally and (or) spatially clustered. Aligned scoria cones and elongate vent edifices were constructed atop fissure vent systems that reflect the local stress field, which controls dike ascent through the middle and upper crust.

Professional Paper↗
USGS2026

Deep groundwater total dissolved solids mapping in the Dakota Group, Williston Basin, USA

Growing concern about the quantity of available freshwater around the world has led to interest in surveying groundwater total dissolved solids (TDS) below water well depths. Deep TDS has not been systematically mapped, and there is much to learn about the distribution and controls on deeper groundwater. In sedimentary basins across the United States, groundwater resources often overlie hydrocarbon resources, providing an opportunity to use borehole geophysical data collected for hydrocarbons to characterize groundwater and pore space resources. This study adapts a recently developed subsurface geostatistical and geophysical modeling approach to continuously map groundwater TDS, porosity, and temperature in the Dakota Group of the Williston Basin—an undercharacterized regional aquifer system overlying deeper hydrocarbon reservoirs. Groundwater TDS in the Dakota Group ranges from approximately 4800 to 26,900 mg/L. TDS patterns are stratified with higher TDS in the lower and upper Dakota Group, and relatively lower TDS in the middle Dakota Group. The lower TDS in the middle zone may represent a preferential regional flow path for lower-TDS meteoric recharge from the west. The alternating pattern of TDS may also be evidence of higher-TDS inflows into the Dakota Group from underlying and potentially from overlying aquifers. Porosity is lower near the center of the Williston Basin and tends to be higher to the east, which may be related to grain size distributions. The new regional TDS and porosity modeling serves as a quantitative reference for water users and provides supporting evidence for hypotheses on Dakota Group recharge.

Montana, North Dakota, South Dakota↗
USGS2024

Conceptual hydrogeologic framework and groundwater budget near the southeastern part of Puget Sound, Washington

More than 1 million people live within the active model area (AMA) in the southeastern part of the lowlands surrounding Puget Sound, or Puget Lowland, Washington, and groundwater is the source for approximately one-half of their public, domestic, and irrigation water demands. The 887-square-mile AMA, located in King and Pierce Counties, represents the area of analysis for the conceptual hydrogeologic framework and numerical groundwater-flow models within the study area and includes the Puyallup River and Chambers-Clover Creek watersheds. To assess the potential hydrologic and anthropogenic impacts to groundwater and the connected surface-water resources, conceptual and numerical groundwater-flow models of groundwater flow were developed by the U.S. Geological Survey Washington Water Science Center in close cooperation with 18 water-resource agencies and stakeholders. This report presents information used to characterize the groundwater-flow system and the development of a numerical model in the AMA. Included are descriptions of the geology and conceptual hydrogeologic framework, groundwater levels and flow directions, groundwater recharge and discharge, numerical groundwater-flow model construction and results, and model limitations. The study area encompasses the western part of Pierce County and the southwestern part of King County, Washington. The study area extends south to the Nisqually River, southwest to Tanwax Creek, northeast to the Green River, and north through the valley near Auburn and adjacent uplands. It is bounded on the east by foothills of the Cascade Range, and on the northwest by Puget Sound.

Washington↗
USGS2024

The 2023 U.S. 50-state National Seismic Hazard Model: Changes in 2023 compared to 2018 ground motions

We present the 2023 U.S. National Seismic Hazard Model (NSHM) for all 50 states that applies new smoothed seismicity, fault rupture, and ground motion models. New data and methods are introduced in the 2023 earthquake rupture forecast that include: new earthquake catalogs - excluding induced earthquakes, alternative declustering methods, spatially smoothed seismicity distributions, full-catalog scaled rates to account for aftershocks, updated CEUS-WUS attenuation boundary, new magnitude-scaling equations, new geodetic and geologic deformation models, and alternative fault system solutions accounting for a more complete representation of epistemic uncertainty potential for earthquake generation in Alaska, Hawaii, and the conterminous U.S. Improved ground motion models consider new Next Generation Attenuation NGASubduction, modified NGA-East, and adjustments to account for regional biases in ground shaking observations. Semi-empirical and 3D simulations of ground motion are applied to account for shaking at 21 oscillator periods, 2 peak motions, and 8 site conditions. Site effects models are constructed for western U.S. basins (Seattle, Portland/Tualatin, San Francisco, Central Valley of California, Los Angeles, and Salt Lake City) and for sites with deep sedimentary wedges found across the central and eastern U.S. Gulf Coast and Atlantic coastal plain regions. These models result in substantial changes compared to the older NSHMs and are differentiated for the earthquake rupture forecast and ground motion model changes to display sensitivities and impacts.

Conference Paper↗
USGS2025

Generalized Bancroft algorithm for locating earthquakes with P- and S-wave arrival times

Because of similarities between locating an earthquake with seismic stations and locating a Global Positioning System (GPS) receiver from satellites, the Bancroft algorithm developed for GPS processing can be used to locate earthquakes. Such an approach to earthquake location differs from the conventional method of choosing an initial or trial solution and then iteratively improving the solution until convergence. The Bancroft algorithm has the advantage of being a direct, noniterative solution but with the disadvantage of only being able to accommodate a homogeneous velocity model. An additional limitation of the standard Bancroft algorithm is that it considers arrival times in a medium with a single propagation velocity. This poses no problem for GPS processing because electromagnetic waves travel at the speed of light; however, for seismic waves it means the algorithm can be applied to collections of either P ‐ or S ‐wave arrival times. Here, I show how the Bancroft algorithm can be generalized to handle both P ‐ and S ‐wave arrival‐time measurements simultaneously. I also show how to accommodate depth‐varying P ‐ and S ‐wave velocity models. I apply the generalized Bancroft algorithm to microearthquakes beneath Tanaga Volcano in Alaska and compare standard locations from the widely used HYPOINVERSE location code to Bancroft locations and to the output of HYPOINVERSE when setting the trial location to the Bancroft location. I find the Bancroft locations outperform the results from the other methods for shallow earthquakes near sea level, where a quantity known as the geometric dilution of precision is large and linearized approaches such as HYPOINVERSE are expected to struggle.

Alaska↗
USGS2026

Continuous monitoring and temporal variability of fluorescence of dissolved organic matter in karst groundwater of the Edwards aquifer, south-central Texas, 2019–24

Widespread urbanization on the Edwards aquifer recharge zone in south-central Texas has prompted the development of new approaches and tools for evaluating the current and future status of water quality in the San Antonio and Barton Springs segments of the Edwards aquifer. The U.S. Geological Survey, in cooperation with the San Antonio Water System and the City of Austin, applied continuous monitoring of fluorescence of dissolved organic matter (fDOM) to characterize the sources and transport of dissolved organic matter and associated constituents in the Edwards aquifer. Continuous fDOM time-series data were adjusted using empirically derived temperature, turbidity, and inner-filter-effect correction factors prior to analysis and interpretation. Fully corrected fDOM time-series data from the study sites were evaluated for short- and long-term temporal variability in fDOM in the context of the hydrologic and climatic conditions that occurred during the 5-year study period to understand vulnerability of the aquifer to potential contaminants in recharge. Study results indicate that fDOM is an effective proxy for dissolved organic carbon that, in turn, is indicative of the influx of recent surface water and associated contaminants, and thus, aquifer vulnerability to those contaminants. Although other continuously monitored water-quality parameters provide insights into changes in water quality in response to varying hydrologic conditions, the quantitative relation between fDOM and dissolved organic carbon directly indicates the timing and magnitude of pulses of organic constituents derived from the land surface, whereas other water-quality parameters do not.

Texas↗
USGS2026

Hydrologic variability drives environmental and geospatial relationships in Smallmouth Bass (Micropterus dolomieu) distribution

Hydrologic variation is a primary driver of stream ecosystems. Changing hydrology can lead to assemblage shifts and alterations in suitable habitat for freshwater species. As climate change is predicted to alter flow patterns in addition to increasing water temperatures, insight into relationships between species occupancy, hydrology, and temperature is critical for understanding current and future distributions. We examined how hydrologic variability, temperature, and other environmental variables interact to influence Micropterus dolomieu (Smallmouth Bass) occurrence. We used Spatial Stream Network models, allowing for the incorporation of spatial autocorrelation along streams' unique dendritic network, to examine Smallmouth Bass occupancy across a range of hydrologic variation in the Ozark-Ouachita Interior Highlands, USA. Hydrologic variation was the main driver of Smallmouth Bass occurrence, with occurrence more likely in groundwater streams with low hydrologic variation and high flow permanence. For groundwater streams, occurrence was positively associated with summer stream temperature and negatively associated with annual stream temperature. As variation increased, more variables showed significant relationships with occurrence. Distance metrics were important for all models, however as hydrologic disturbance increased, flow connected distance played a lesser role and stream distance played a greater role. Hydrologic variability was the overarching determinant of Smallmouth Bass occurrence and strongly influenced the predictive importance of environmental variables and geospatial relationships. Greater hydrologic variability resulted in stronger statistical relationships between occurrence and environmental variables and an increased importance of system connectivity. As climate change alters hydrologic processes and streams become more variable, understanding and accounting for these shifting relationships is essential.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS2026

The Sand AbrasioN Device for Aeolian Research (SANDAR): A new experimental device for investigating how wind transport affects sand on Earth and Mars

On Earth and Mars, aeolian transport causes sand grains to become abraded, resulting in mineralogic and textural changes. Understanding how sands evolve, or mature, with transport via experimental studies is important for understanding the origins, geologic history, and cycling of sediments, as well as dust production. Previous experimental works have used a variety of methods to simulate aeolian transport in the laboratory, but practical limitations and similitude concerns have limited such research. Here, we present and validate the Sand AbrasioN Device for Aeolian Research (SANDAR), a modified air mill that uses pressurized air to circulate sand around a small abrasion chamber, simulating the effects of aeolian transport. This device is re-circulating to simulate long-distance transport, and it allows for repeated analyses of well-constrained sediment samples, revealing their evolution over time. It is compatible with the grain sizes (74–500 μm) and grain impact velocities (∼0.6–3.7 m/s) typically expected for natural aeolian environments, and is also adaptable for diverse applications simulating different wind conditions. We show that the SANDAR achieves similitude of kinetic energy with respect to saltating sand on both Earth and Mars. SEM and optical microscope imaging reveal that the SANDAR produces microtextures on the surfaces of sand grains similar to those found with natural aeolian transport, demonstrating that it effectively simulates the mechanical effects of aeolian processes. Thus, the SANDAR is a valid tool for use in experimental research to improve our understanding of sedimentary processes across the Solar System.

Aeolian Research↗
USGS2025

Extremophile hotspots linked to containerized industrial waste dumping in a deep-sea basin

Decaying barrels on the seafloor linked to DDT contamination have raised concerns about the public health implications of decades old industrial waste dumped off the coast of Los Angeles. To explore their contents, we collected sediment cores perpendicular to five deep-sea barrels. The concentration of DDT and its breakdown products were highly elevated relative to control sites yet did not vary with distance from the barrels, suggesting that they were not associated with the contamination. Sediment cores collected through white halos surrounding three barrels were enriched in calcite and had elevated pH. The associated microbial communities were low diversity and dominated by alkalophilic bacteria with metagenome-assembled genomes adapted to high pH. A solid concretion sampled between a white halo and barrel was composed of brucite, a magnesium hydroxide mineral that forms at high pH. Based on these findings, we postulate that leakage of containerized alkaline waste triggered the formation of mineral concretions that are slowly dissolving and raising the pH of the surrounding sediment pore water. This selects for taxa adapted to extreme alkalinity and drives the precipitation of “anthropogenic” carbonates forming white halos, which serve as a visual identifier of barrels that contained alkaline waste. Remarkably, containerized alkaline waste discarded >50 years ago represents a persistent pollutant creating localized mineral formations and microbial communities that resemble those observed at some hydrothermal systems. These formations were observed at one-third of the visually identified barrels in the San Pedro Basin and have unforeseen, long-term consequences for benthic communities in the region.

California↗
USGS2025

Central Valley Hydrologic Model version 2 (CVHM2): Decision support tool for groundwater and land subsidence management

The San Joaquin Valley (SJV) of California is one of the world’s most productive agricultural regions. Reliance on groundwater has led to some of the greatest rates of human-induced land subsidence in the world in the 20th century, as well as more recently. The United States Geological Survey (USGS) has recently developed an integrated surface–subsurface hydrologic model, the Central Valley Hydrologic Model 2 (CVHM2), that represents the major components of the hydrologic system of California’s Central Valley. In this study, CVHM2 was applied as a decision support tool while simulating various management strategies to mitigate the land subsidence caused by the extraction of groundwater. CVHM2 was extended through to 2073 and applied to simulate management scenarios in terms of three primary drivers and their impact on subsidence along the Delta–Mendota Canal (DMC), a critical piece of infrastructure in the western SJV. The drivers considered were agricultural water demands, managed aquifer recharge (MAR), and changes in future climate. The results show that future subsidence is most sensitive to water demands, second most sensitive to future changes in climate, and relatively insensitive to MAR when it is applied as a surface application in the western SJV. However, we demonstrate via proof-of-concept scenarios that the MAR is capable of arresting subsidence when implemented via injection below the Corcoran Clay Member of the Tulare Formation instead of as a surface application. We also examine the uncertainty that is the result of climate variability and how to use the tool to identify the most appropriate strategies to constrain future subsidence to acceptable levels.

California↗