USGS Science⌕ Search

SEARCH · USGS Science

Results for “Outcrop”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
USGS1997

Digital data sets that describe aquifer characteristics of the Tillman terrace and alluvial aquifer in southwestern Oklahoma

ARC/INFO export and nonproprietary format files This diskette contains digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the Tillman terrace and alluvial aquifer in southwestern Oklahoma. The Tillman terrace aquifer encompasses the unconsolidated terrace deposits and alluvium associated with the North Fork of the Red River and the Red River in the western half of Tillman County. These sediments consist of discontinuous layers of clay, sandy clay, sand, and gravel. The aquifer extends over an area of 285 square miles and is used for irrigation and domestic purposes. Granite and the Hennessey Formation outcrop in northern parts of the aquifer where alluvial deposits are absent. These outcrops were included as part of the aquifer in a thesis that modeled the ground-water flow in the aquifer. Most of the aquifer boundaries and some of the lines in the hydraulic conductivity and recharge data sets were extracted from a published digital surficial geology data set based on a scale of 1:250,000. Most of the lines in the hydraulic conductivity, recharge, and 1969 water-level elevation contour data sets, and one line in the aquifer boundary data set were digitized from a paper map published at a scale of 1:249,695 in a thesis in which the ground-water flow in the aquifer was modeled. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Oklahoma↗
USGS1997

Preliminary geologic map of the Simi 7.5' quadrangle, southern California: A digital database

The Simi Quadrangle covers an area of about 62 square miles in southern Ventura County. The Santa Clara River Valley occupies the northwestern corner of the quadrangle. Mountainous terrain of South Mountain and Oak Ridge characterizes the northern and central area. Elevation within the quadrangle ranges from about 250 feet along the arroyo bottoms to over 2200 feet. Steep, highly dissected slopes form much of the boundary of the area. In the southeast, Little Simi Valley, drained by Arroyo Simi/Arroyo Las Posas, separates the southern flank of Oak Ridge from the Las Posas Hills. The Las Posas upland area, a broad elevated region that slopes gently to the south, separates the South Mountain-Oak Ridge highlands from the Las Posas-Camarillo Hills between Little Simi Valley on the east and the Oxnard Plain on the west. This relatively low-lying area is also referred to as the Las Posas Valley. Numerous north-south-trending drainages cut South Mountain and Oak Ridge creating steep narrow canyons on north-facing slopes and wide flat-bottomed canyons with incised streams on south-facing slopes. A network of residential streets and ranch and oilfield roads that traverse the area from U.S. Highway 101 and State Highways 118, 23, and 126 provides access to the area. Current land use includes citrus and avocado orchards, oil well drilling and production, sand and gravel quarries, decorative-rock quarries, cattle grazing, suburban residential development, and golf courses. The oldest geologic unit mapped in the Simi Quadrangle is the upper Eocene to lower Miocene Sespe Formation. The Sespe Formation consists of alluvial fan and floodplain deposits of interbedded pebble-cobble conglomerate, massive to thick-bedded sandstone, and thin-bedded siltstone and claystone. In the northern part of the map area, Sespe Formation is overlain by and interfingers with the upper Oligocene to lower Miocene Vaqueros Formation that is composed of transitional and marine sandstone, siltstone, and claystone with local sandy coquina beds. In the Las Posas Hills, Sespe Formation is unconformably overlain by marine sandstones of the middle Miocene Topanga Group that are interlayered with and intruded by basalt flows, breccia, and diabase dikes of the Conejo Volcanics. Deep-marine strata of the upper Miocene Modelo Formation cover the Vaqueros Formation and Topanga Group along the crests and southern flanks of South Mountain and Oak Ridge. They also occur as isolated outcrops in the Las Posas Hills. Locally, Modelo Formation consists of interbedded diatomaceous shale, claystone, mudstone, and siltstone with minor sandstone, limestone, chert, and tuff beds. The most widely exposed rock units in the area are the Plio-Pleistocene marine and non-marine Pico and Saugus Formations that crop out on the southern flank of South Mountain-Oak Ridge. Locally, the Pico Formation consists of marine siltstone and silty shale with minor sandstone and pebbly sandstone. The Saugus Formation overlies and interfingers with the Pico Formation and is composed of interbedded shallow-marine to brackish water sandstone, siltstone, pebble-to-cobble conglomerate, and coquina beds that grade laterally and vertically into non-marine sandstone, siltstone, and conglomerate. A local member of the Saugus Formation is exposed in the southwest corner of the map area. It is predominantly a volcanic breccia conglomerate that resembles the Conejo Volcanics breccia, but is believed to represent remnants of landslide debris shed from the Conejo Volcanics into a local trough during Saugus time. Quaternary surficial deposits cover the floor and margins of the Little Simi Valley, Santa Clara River Valley in the north, and Arroyo Las Posas in the south, and extend up into the larger canyons that drain South Mountain and Oak Ridge. Extensive surficial deposits are also present in the Las Posas upland area in the southwest. These upper Pleistocene to Holocene sediments consist of older and younger alluvial fan and valley deposits, colluvium, active alluvial fans, and active stream deposits. Pleistocene- to Holocene-age landslide deposits are widespread throughout the Simi Quadrangle, especially in the finer grained Tertiary sedimentary units where bedding planes are dip slopes. In addition, massive slumps are present in the Sespe and Vaqueros Formations on anti-dip slopes. Seismic and well data from the San Fernando Valley (SFV) document evolution of that region from mid-Miocene rifting to north-south contraction. Formations in the western SFV subsurface (Cretaceous to Paleogene strata, and Miocene Topanga and Modelo Formations) trace southward to outcrops in the Santa Monica Mountains that constrain faulting along the valley's south basin edge. Cretaceous strata in the Simi Uplift to the west are over 2 km higher than equivalent strata beneath the western SFV across a boundary marked by the Chatsworth Reservoir fault, and Neogene thinning and offlap. The Simi fault, located at the eastern end of the Simi-Santa Rosa fault system, bounds the northern margins of the Simi and Tierra Rejada Valleys. West of Simi Valley, the Simi fault has placed Miocene Conejo Volcanics over Plio-Pleistocene Saugus Formation rocks. The 15.5 ± 0.8 m.y.a. base of the Conejo Volcanics, identified in oil well logs, is inferred to have a dip-slip separation of about 425 to 550 m, suggesting a low long-term slip rate of about 0.03 mm/yr. However, substantial late Quaternary offset is suggested by the presence of more than 150 m of Pleistocene and younger alluvium that fills the east-west trending, down-dropped bedrock trough beneath western Simi Valley. In addition, trenching within faulted colluvial deposits in Tierra Rejada Valley has revealed evidence of multiple shears within Holocene (?) deposits.

California↗
USGS1999

Quality of stormwater runoff from an urbanizing watershed and a rangeland watershed in the Edwards aquifer recharge zone, Bexar and Uvalde counties, Texas, 1996-98

Encroachment of urban development on the outcrop of the Edwards aquifer (the recharge zone), particularly in Bexar County, has raised the issue of possible contamination of water that enters the aquifer. Increasing residential and commercial development on the recharge zone increases the potential for runoff containing toxic substances, oil spills, or leakage of hazardous materials to contaminate the regional drinking water supply. The Edwards aquifer is a dipping sequence of extensively faulted, fractured, and dissolutioned limestone and dolostone that yields large quantities of water to wells and springs. The recharge zone is essentially coincident with the area in which the aquifer crops out. Recharge to the aquifer is derived mainly from seepage from streams crossing the recharge zone and by direct infiltration of precipitation on the outcrop. In 1996, the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority and the Nature Conservancy of Texas, began a study to compare stormwater runoff from two sites in the recharge zone in watersheds of similar size and different land use. One site is located on Lorence Creek, a tributary to Salado Creek in northern Bexar County, and the other site is on an unnamed tributary of the Frio River in northern Uvalde County (fig. 1). Flow at the two sites results only from storm runoff. Both watersheds have similar climate, topography, soils, and vegetation. Land use in the Lorence Creek watershed is primarily single-family residential, commercial, and transportation. Land use in the watershed of the Frio River tributary is primarily rangeland. The drainage area of each watershed is less than 2 square miles.

Texas↗
USGS1981

Lithostratigraphy of the Silurian rocks exposed on the west side of the Cincinnati Arch in Kentucky

This report discusses the Silurian rocks that crop out in Kentucky west of the axis of the Cincinnati arch. The Silurian System has a maximum thickness in this outcrop area of about 190 feet. It is in most places separated from the underlying Ordovician System by a minor erosional unconformity. It is separated from the overlying Devonian System by a major erosional unconformity along which the entire Silurian section has been removed in some areas. The Silurian is divided into five formations, which are, from lowest to highest: (1) Brassfield Dolomite (or Formation), composed of dolomite in the south and both limestone and dolomite in the north; (2) Osgood Formation, shale and minor dolomite; (3) Laurel Dolomite, dolomite; (4) Waldron Shale, shale and minor dolomite; and (5) Louisville Limestone, calcitic dolomite and dolomitic limestone. The Brassfield is of Early Silurian age; the other formations are Middle Silurian. The main outcrop area of the rocks considered in this re- port extends about 85 miles south from the Ohio River and has a maximum width of about 20 miles. The rocks in this belt generally dip westward about 30 feet per mile. Part of this dip was imparted to the rocks prior to the cutting of the overlying unconformity, but most of it came later. Minor tectonic movement along west-northwest and east-northeast trends probably took place during Silurian time. Thickening of the Brassfield and Osgood southward across the westnorthwest-trending Bardstown monocline and thickening of the Brassfield in the axial zone of the east-northeast-trending Lyndon syncline indicate that movement took place along these structures during or immediately before the deposition of these formations. Several remarkably persistent thin units of dolomite and shale that make up the Osgood, the Laurel, and the Waldron indicate a depositional strike about north. The dolomite was originally mostly fossiliferous limestone deposited in shallow marginal seas. The source of the shale was to the east.

Professional Paper↗
USGS1984

Sandstone units of the Lee Formation and related strata in eastern Kentucky

Most of the Cumberland Plateau region of southeastern Kentucky is underlain by thick sequences of quartzose sandstone which are assigned for the most part to the Lee Formation. Much new information has been gathered about the Lee and related strata as a result of the cooperative mapping program of the U. S. Geological Survey and the Kentucky Geological Survey between 1960 and 1978. This report summarizes the age, lithology, distribution, sedimentary structures, and stratigraphic relations of the sandstone units of the Lee within and between each of three major outcrop belts in Kentucky: Cumberland Mountain, Pine Mountain, and the Pottsville Escarpment area. The Lee Formation generally has been regarded as Early Pennsylvanian in age and separated from Mississippian strata in Kentucky by an unconformity. However, lithostratigraphic units included in the formation as presently defined are broadly time-transgressive and range in age from Late Mississippian in parts of the Cumberland Mountain outcrop belt to Middle Pennsylvanian in the Pottsville Escarpment area. Members of the Lee intertongue with and grade into the underlying Pennington Formation and overlying Breathitt Formation. Sandstone and conglomeratic sandstone members of the Lee of Mississippian age found only in parts of the Cumberland overthrust sheet are closely associated with marine rocks; Pennsylvanian members are mostly associated with continental coal-bearing strata. Sandstone members of the Lee are mostly quartz rich and range from more than 90 percent to more than 99 percent quartz. They are relatively coarse grained, commonly pebbly, and in places conglomeratic. The units are southwest-trending linear or broadly lobate bodies. The Lee Formation is as much as 1,500 ft thick in the type area in Cumberland Mountain where it has been divided into eight members. The Pinnacle Overlook, Chadwell, White Rocks Sandstone, Middlesboro, Bee Rock Sandstone, and Naese Sandstone Members are mostly quartzose sandstone and conglomerate. The Dark Ridge and Hensley Members are mostly shale, siltstone, thin-bedded silty sandstone, and coal. The lower three of these members, the Pinnacle Overlook, Chadwell, and White Rocks Sandstone, are assigned to the Upper Mississippian Series because they intertongue with marine reddish or greenish shale and siltstone of the Pennington Formation or equivalent strata that contain a Late Mississippian fauna. The overlying quartzose sandstone members of the Lee commonly have coalified plant remains and impressions of plants and are Early to Middle Pennsylvanian in age; they are generally associated with terrestrial shale and siltstone containing coal beds and pinch out eastward into subgraywacke, siltstone, and shale. Although marine members commonly are bimodal, resultant transport directions for both marine and terrestrial members are southwesterly as determined by crossbedding. Thickness variations of the Middlesboro Member in the Cumberland overthrust sheet suggest that it represents tills of at least three major southwesterly trending paleovalleys. Thickness variations of the Bee Rock Sandstone Member east of Rocky Face fault and the combined Bee Rock and Naese Sandstone Members west of Rocky Face fault suggest that these members represent tills of at least two major southwesterly trending paleovalleys. East of Rocky Face fault, the Bee Rock is generally the uppermost member of the Lee; west of the fault, the overlying Naese is at the top. The Naese may range in age from Early to Middle Pennsylvanian and is partly or wholly equivalent to the Rockcastle Sandstone member of the Lee Formation in the area of the Pottsville Escarpment. The Mississippian-Pennsylvanian systemic boundary in the area of the Cumberland overthrust sheet in most places has been placed at an unconformity at the base of the Middlesboro Member; locally it is projected at the base of shales of the underlying Dark Ridge Member or equivalent strata in the Penningto

Professional Paper↗
USGS1981

Deformation of host rocks and flow of magma during growth of minette dikes and breccia-bearing intrusions near Ship Rock, New Mexico

We have studied a small group of minette dikes and plugs that crop out within a flat-lying sequence of siltstone and shale near Ship Rock, a prominent volcanic throat of tuff breccia in northwestern New Mexico. Seven dikes form a radial pattern about Ship Rock we describe in detail the northeastern dike, which has an outcrop length of about 2,900 m, an average thickness of 2.3 m, and a maximum thickness of 7.2 m. The dike is composed of 35 discrete segments arranged in echelon; orientation. of dike segments ranges systematically from N. 52? E. to N. 66? E. A prominent joint set strikes parallel to the segments and is localized within several tens of meters of the dike. Regional joint patterns display no obvious relation to dike orientation. Small offsets of segment contacts, as well as wedge-shaped bodies of crumpled host rock within segments mark the sites of coalescence of smaller segments during dike growth. Bulges in the dike contact, which represent a nondilational component of growth, indicate that wall rocks were brecciated and eroded during the flow of magma. Breccias make up about 9 percent of the 7,176-m 2 area of the dike, are concentrated in its southwest half, and are commonly associated with its thickest parts. We also describe three subcircular plugs; each plug is smaller than 30 m in diameter, is laterally associated with a dike, and contains abundant breccias. Field evidence indicates that these plugs grew from the dikes by brecciation and erosion of wallrocks and that the bulges in the contact of the northeastern dike represent an initial stage of this process. From continuum-mechanical models of host-rock deformation, we conclude that dike propagation was the dominant mechanism for creating conduits for magma ascent where the host rock was brittle and elastic. At a given driving pressure, dikes dilate to accept greater volumes of magma than plugs, and for a given dilation, less work is done on the host rocks. In addition, the pressure required for dike growth decreases with dike length. From numerical solutions for dilation of cracks oriented like segments of the northeastern dike, we find that we can best model the form of the dike by treating it as composed of 10 cracks rather than 35. We attribute this result to coalescence of adjacent segments below the present outcrop and to inelastic deformation at segment ends. Using a driving pressure of 2 MPa (20 bars), we estimate a shear modulus of about 10^3 MPa for the host rocks, in agreement with laboratory tests on soft shale. A propagation criterion based on stress intensity at the segment ends indicates a fracture toughness of the host rocks of about 100 MPa-m^? , a hundredfold greater than values reported from laboratory tests. Segmentation of fractures is common in many materials and has been observed during fissure eruptions at Kilauea Volcano in Hawaii. At the northeastern dike, we attribute segmentation to local rotation of the direction of least principal compressive stress. From continuum-mechanical models of magma and heat flow in idealized conduits, we conclude that magma flows far more rapidly and with less relative heat loss in plugs than in dikes. Although dikes are the preferred form for emplacement, plugs are the preferred form for the flow of magma. We present a numerical solution for volumetric flow rate and wall heat flux for the northeastern dike and find that although the flow rate is extremely sensitive to conduit geometry, the rate of heat loss to wall rocks is not. During emplacement of the northeastern dike, local flow rate increased where wall rocks were eroded and reached a maximum of about 45 times the mean initial rate, whereas the maximum rate of heat loss to wallrocks increased to only 1.6 times the mean initial rate. An inferred progression from continuous magma flow along a dike to flow from a plug agrees well with observations of volcanic eruptions that begin from fissures and later are localized at discrete vents. We

Professional Paper↗
USGS1983

Stratigraphy and paleontology of Mid-Cretaceous rocks in Minnesota and contiguous areas

PART A: Molluscan fossils are locally abundant at outcrops of Upper Cretaceous rocks in eastern North and South Dakota, northeastern Nebraska, northwestern Iowa, and western and northern Minnesota. Other Cretaceous mollusks have been found in the glacial deposits in Minnesota, Iowa, and Illinois. The oldest well dated marine mollusks are of earliest late Cenomanian age and occur in northwestern Iowa. Mollusks of marginal marine and nonmarine environments in northwestern Iowa and south-central Minnesota are probably of slightly younger late Cenomanian age. The youngest mollusks treated in this report are bivalves of Santonian age found in the Niobrara Formation in eastern North and South Dakota. The collections indicate the presence or former presence of the following ammonite zones in the northeastern part of the Western Interior seaway: Santonian: Scaphites depressus-Clioscaphites choteauensis Coniacian: Scaphites uentrocosus; Scaphites preuentricosus Turonian: Scaphites coruensis; Scaphites whitfieldi; Prionocyclus hyatti; Subprionocyclus percarinatus; Collignoniceras woollgari; Watinoceras coloradoense Cenomanian: Dunueganoceras albertense; Dunueganoceras pondi PART B: Sedimentary rocks of early Late Cretaceous age occur in the eastern parts of North Dakota, South Dakota, and Nebraska, and in Minnesota and western Iowa. They are generally included in, from oldest to youngest, the Dakota Formation, Graneros Shale, Greenhorn Formation, Carlile Shale, and Niobrara Formation. However, in eastern North Dakota, they are also assigned to, in ascending order, the Belle Fourche Shale, Greenhorn Formation, Carlile Shale, and Niobrara Formation. The Graneros Shale and laterally equivalent strata in the Belle Fourche Shale grade eastward into the Coleraine Formation of northeastern Minnesota and probably into the Windrow Formation of southeastern Minnesota. Cretaceous beds locally overlie rocks of Precambrian, Paleozoic, and Jurassic ages, and they are generally overlain by glacial drift and alluvium of Quaternary age. In Minnesota and adjoining areas, formations of mid-Cretaceous age commonly overlap the dissected surface of Precambrian rocks. The thickness of the lower Upper Cretaceous sequence ranges from about 223 m in eastern North Dakota and about 200 m in northeastern Nebraska to a featheredge in Minnesota and Iowa. These lower Upper Cretaceous formations are composed mainly of shale, siltstone, sandstone, and limestone units of marine and nonmarine origin and were deposited near the eastern shore of a transgressing and regressing epicontinental sea in Cenomanian Turonian Coniacian. and Santonian time. During the late Cenoanian, the strandline was in Minnesota and was oriented generally northnortheast. Interpretations of the depositional environments of the strata and of fossils from outcrops and from clasts in glacial drift indicate that the Cretaceous seaway extended from this region northeastward across Canada to Greenland in the Turonian Coniacian, and Santonian. The Cretaceous formations are deformed into broad, shallow synclines in eastern North and South Dakota and in northeastern Nebraska. A west-trending anticline, the Sioux uplift, separates the synclines in southeastern South Dakota. Sparse evidence of minor faulting in the formations exists in northeastern South Dakota, along the strike of a major southwest-trending zone of tectonism in the Precambrian basement rocks. The structural relief in the region, on the top of the Greenhorn Formation, is at least 250 m between eastern North Dakota and northeastern Minnesota, and at least 200 m between northeastern Nebraska and northwestern Iowa. A comparison of the Cretaceous stratigraphy of the Minnesota region and of areas in Wyoming indicates that some marine transgressions and regressions were synchronous in the two regions. The transgression during Greenhorn time, the regression during early Carlile time, and the transgression dur

Iowa, Minnesota, Nebraska, North Dakota, South Dak↗
USGS1984

The Mid-Cretaceous Frontier Formation near the Moxa Arch, southwestern Wyoming

The Frontier Formation in the Green River Basin of Wyoming, Utah, and Colorado, consists of sandstone, siltstone, and shale, and minor conglomerate, coal, and bentonite. These strata were deposited in several marine and nonmarine environments during early Late Cretaceous time. At north-trending outcrops along the eastern edge of the overthrust belt, the Frontier is of Cenomanian, Turonian, and early Coniacian age, and commonly is about 610 m (2,000 ft) thick. The formation in that area conformably overlies the Lower Cretaceous Aspen Shale and is divided into the following members, in ascending order: Chalk Creek, Coalville, Allen Hollow, Oyster Ridge Sandstone, and Dry Hollow. In west-trending outcrops on the northern flank of the Uinta Mountains in Utah, the Frontier is middle and late Turonian, and is about 60 m (200 ft) thick. These strata disconformably overlie the Lower Cretaceous Mowry Shale. In boreholes on the Moxa arch, the upper part of the Frontier is of middle Turonian to early Coniacian age and unconformably overlies the lower part of the formation, which is early Cenomanian at the south end and probably Cenomanian to early Turonian at the north end. The Frontier on the arch thickens northward from less than 100 m (328 ft) to more than 300 m (984 ft) and conformably overlies the Mowry. The marine and nonmarine Frontier near the Uinta Mountains, marine and mnmarine beds in the upper part of the formation on the Moxa arch and the largely nonmarine Dry Hollow Member at the top of the Frontier in the overthrust belt are similar in age. Older strata in the formation, which are represented by the disconformable basal contact of the Frontier near the Uinta Mountains, thicken northward along the Moxa arch and westward between the arch and the overthrust belt. The large changes in thickness of the Frontier in the Green River Basin were caused mainly by differential uplift and truncation of the lower part of the formation during the early to middle Turonian and by the shoreward addition of progressively younger sandstone units at the top of the formation during the late Turonian and early Coniacian. The sandstone in cores of the Frontier, from boreholes on the Moxa arch and the northern plunge of the Rock Springs uplift, consists of very fine grained and fine-grained litharenites and sublitharenites that were deposited in deltaic and shallow-water marine environments. These rocks consist mainly of quartz, chert, rock fragments, mixed-layer illite-smectite, mica-illite, and chlorite. Samples of the sandstone have porosities of 4.7 to 23.0 percent and permeabilities of 0.14 to 6.80 millidarcies, and seem to represent poor to fair reservoir beds for oil and gas. The shale in cores of the Frontier Formation and the overlying basal Hilliard Shale, from the Moxa arch, Rock Springs uplift, and overthrust belt, was deposited in deltaic and offshore-marine environments. Samples of the shale are composed largely of quartz, micaillite, mixed-layer illite-smectite, kaolin, and chlorite. They also contain from 0.27 to 4.42 percent organic carbon, in humic and sapropelic organic matter. Most of the sampled shale units are thermally mature, in terms of oil generation, and a few probably are source rocks for oil and gas.

Professional Paper↗
USGS1989

Geochemistry of the Floridan aquifer system in Florida and in parts of Georgia, South Carolina, and Alabama

The chemical quality of the ground water in the Floridan aquifer system is determined primarily by mineral-water interaction. However, some changes in water quality have been imposed by development, particularly near coastal pumping centers. A total of 601 chemical analyses, all from different wells, most completed in the upper part of the aquifer system, were used to describe the variations in water chemistry and to study the processes responsible for observed changes. The Floridan aquifer system is a vertically continuous sequence of Tertiary carbonate rocks that are of generally high permeability and are hydraulically connected in varying degrees. The rocks are principally limestone and dolomite, but they grade into limy sands and clays near the aquifer system's updip limits. Major minerals in the aquifer system are calcite, dolomite, and, locally, gypsum or quartz; minor minerals include apatite, glauconite, and clay minerals such as kaolinite and montmorillonite. Trace amounts of metallic oxides or sulfides are present in some areas. The aquifer system consists of the Upper and Lower Floridan aquifers, separated in most places by a less permeable confining unit that has highly variable hydraulic properties. Only the Upper Floridan aquifer is present throughout the study area. Freshwater enters the aquifer system in outcrop areas located primarily in central Georgia and north-central Florida. Discharge occurs chiefly to streams and springs and, to a lesser extent, directly into the sea. Most of the flow into and out of the system takes place where it is unconfined or where the upper confining unit is thin. Secondary permeability developed by dissolution of aquifer material is most prominent in these areas of dynamic flow. Dissolved-solids concentrations in water from the Upper Floridan aquifer generally range from less than 25 milligrams per liter near outcrops to more than 25,000 milligrams per liter along the coasts. The dominant cations in the ground water are Ca2+, Mg2+, and Na+; the dominant anions are HCO3-, Cl-, and SO42-, The concentration of Ca2+ is controlled primarily by calcite saturation. Concentrations of Mg2+, NA+, and Cl- are highest where mixing of freshwater and saltwater occurs. Concentrations of HCO3- reflect the control of calcite solubility. The concentration of SO42- is highest where gypsiferous rock units are present in the aquifer system. The major geochemical processes that occur in the Upper Floridan aquifer, based on water-quality maps and computations using a geochemical model, are (1) dissolution of aquifer minerals toward equilibrium, (2) mixing of ground water with recharge, leakage, or seawater, (3) sulfate reduction, and (4) cation exchange between water and aquifer minerals. Similar processes apparently control minor dissolved constituents, although quantification is difficult with the available data. Statistical tests of available nutrient data indicate that concentrations of N (nitrogen) species in unconfined recharge areas may be increasing over time; more detailed studies of all N species are needed to test this hypothesis, however. Data on trace metals, radionuclides, and man-made organic contaminants are limited. Available data indicate that most freshwater within the Upper Floridan is potable, but detection of pesticides in a few samples indicates that the system is susceptible to contamination from the land surface in some areas, particularly where its upper confining unit is thin or absent. Geochemical models were used to examine changes in major chemical elements along selected ground-water paths within the Upper Floridan aquifer. Water in the Upper Floridan aquifer can be categorized into four hydrochemical facies, whose exact distribution is determined by confined or unconfined conditions of the aquifer and by chloride concentrations. The reaction models are considered plausible based on available chemical, isotopic, and hydrologic information, and they

Alabama, Florida, Georgia, South Carolina↗
USGS1991

Geohydrologic units of the Mississippi embayment and Texas coastal uplands aquifer systems, south-central United States

As part of the U.S. Geological Survey's Regional Aquifer-System Analysis (RASA) program, the Gulf Coast RASA was initiated to investigate all Tertiary and Quaternary aquifers underlying the Coastal Plain in the south-central United States. Geohydrologic units that make up two of the three regional aquifer systems Mississippi embayment and Texas coastal uplands in the area are described in this report. The gulfward boundary of the outcrop of the two aquifer systems is the southernmost outcrop or subcrop of the Vicksburg-Jackson confining unit, and the updip boundary is the contact between Cretaceous and Tertiary deposits, extending northward to the southern tip of Illinois. The uppermost Cretaceous aquifer, the McNairy-Nacatoch aquifer in the northern part of the Mississippi embayment, is also included where it may be hydraulically connected to the younger sediments. Major regional geohydrologic units generally are coincident with previously defined geologic units. Most of the geohydrologic units consist of alternating sand and clay; however, the entire sequence becomes a clay and carbonate facies gulfward. The regional geohydrologic units delineated in this study, from youngest to oldest, are (1) Mississippi River Valley alluvial aquifer, (2) Vicksburg-Jackson confining unit, (3) upper Claiborne aquifer, (4) middle Claiborne confining unit, (5) middle Claiborne aquifer, (6) lower Claiborne confining unit, (7) lower Claiborne-upper Wilcox aquifer, (8) middle Wilcox aquifer, (9) lower Wilcox aquifer, (10) Midway confining unit, and (11) McNairy-Nacatoch aquifer. The Mississippi embayment aquifer system contains all of these units and has a maximum thickness of about 5,000 feet. The Texas coastal uplands aquifer system, which is contiguous with the Mississippi embayment aquifer system and extends westward and southwestward from the Sabinc uplift, contains all of the foregoing geohydrologic units except the Mississippi River Valley alluvial aquifer, the lower Wilcox aquifer, and the McNairy-Nacatoch aquifer. The Texas coastal uplands aquifer system has a maximum thickness of about 7,000 feet.

Alabama, Arkansas, Illinois, Kentucky, Louisiana, ↗
USGS2005

Sedimentology and sequence stratigraphy of the Cretaceous Nanushuk, Seabee, and Tuluvak formations exposed on Umiat Mountain, north-central Alaska

Upper Cretaceous strata of the upper part of the Nanushuk Formation, the Seabee Formation, and the lower part of the Tuluvak Formation are exposed along the Colville River on the east flank of Umiat Mountain in north-central Alaska. The Ninuluk sandstone, which is the uppermost unit of the Nanushuk Formation, displays a vertical succession of facies indicative of deposition in an upward-deepening estuarine through shoreface setting. A marine-flooding surface lies between the Ninuluk sandstone and organic-rich shale of the basal part of the Seabee Formation. The Ninuluk sandstone and the lower part of the Seabee Formation are interpreted as components of a transgressive-systems tract. The lowest, well-exposed strata in the Seabee Formation are a succession of shoreface sandstone beds in the middle of the formation. Integration of outcrop information and the Umiat No. 11 well log suggests that this sandstone succession rests on a sequence boundary and is capped by a marine-flooding surface. The sandstone succession is interpreted as a lowstand-systems tract. The upper part of the Seabee Formation includes a thick interval of organic-rich shale deposited in a dysaerobic offshore environment, and the gradational Seabee-Tuluvak contact is a coarsening-upward shale-to-sandstone succession deposited in a prodelta/delta-front environment. The observation that the upper part of the Seabee Formation correlates with seismic clinoforms suggests that dysaerobic conditions extended well up onto the prodelta slope during intervals of transgression and highstand. Correlation of the Umiat Mountain outcrop section with well logs and seismic data suggests that sequence boundaries and lowstand shoreface deposits may be common in the Seabee Formation and that wave action may have been important in transporting sand to the paleoshelf margin. These conclusions may contribute to an enhanced understanding of sand distribution in prospective lowstand turbidite deposits in the subsurface of the central North Slope of Alaska.

Professional Paper↗
USGS1989

Geology of the Arabian Peninsula; shield area of western Saudi Arabia

Western Arabia lies within the low-latitude desert of north Africa and the Middle East, the core being the Arabian segment of the African Shield. The core of complex basement rocks accounts for about 670,000 km 2 , or one-third of the Arabian Peninsula. Reconnaissance mapping of these crystalline rocks, together with bordering sedimentary rocks and volcanic flows, begun in 1950, resulted during the next 13 years in a series of geologic and geographic maps without extensive texts. The maps served as general guides for development of natural resources, including water supplies, ore deposits, and building materials. An intensive exploration program that began in 1963 and involved numerous geologists has vastly increased geologic information. Rainfall in Arabia is meager and episodic, and vegetation is sparse except in isolated copses on the crest of the Hejaz Range. Comparison of flora with similar species in the Sudan, where records of rainfall have long been kept, allows evaluation of mean annual precipitation. Wandering bedouin following fodder created a delicate balance between population and water supply-now disturbed by wells drilled in alluvium and lava fields. A trapezoidal region of Precambrian crystalline rocks lies along the northeast flank of the Red Sea, with two long prongs extending northwest and southeast for a total of 1,800 km. These basement rocks of the Arabian Shield are well exposed on the uplands, scarp mountains, and coastal pediments where the Phanerozoic cover rocks have been stripped as a result of Paleozoic epeirogeny and Tertiary ramping. The shield outcrops are divided into three tectonic provinces by N. 45°W.- trending shear zones of the Najd fault system of latest Proterozoic and possibly earliest Paleozoic time. The southwestern province, the 'Asir1 upland, was sharply uplifted and tilted to the northeast during the Neogene. The northwestern province, consisting of the Ash Shifa'- Hisma upland as well as Jabal Shammar farther east, similarly was uplifted and tilted. These two provinces are separated by the flat-lying median N ajd province, which is chiefly bounded by the principal Najd faults. The outcrops of the shield rocks are of the Late Proterozoic Eonupper Riphean to Vendian or Infracambrian epochs, including the Ediacarian System. The most reliable isotopic ages range from about 900 to 560 m.y., but some Middle Proterozoic rocks may be present in the easternmost shield. The rocks are divided into six lithostratigraphic sequences, two plutonic suites, and an ophiolitic suite. The mafic and ultramafic volcanic and plutonic rocks of the ophiolitic suite everywhere were emplaced tectonically and are probably of different ages in different places. Some ophiolite occurs as obducted blocks, but most is highly deformed and altered to serpentinite in fault zones that mostly define sutures between different tectonic blocks or terranes within the shield. Three of the lithostratigraphic sequences consist of mafic to silicic volcanic rocks and volcanic-derived clastic rocks which, with their subvolcanic plutonic rocks of a dioritic suite, probably formed in oceanic island arcs during convergent plate tectonism. These rocks make up the primary, or first-formed, crust of the shield. Chemical analyses show that the primary shield rocks, regardless of age, are principally calc-alkalic with some associated tholeiitic varieties. Most of the layered rocks are andesitic, but they range from basalt to dacite and in places contain intercalated pillow basalt, marble, chert, and carbonaceous or graphitic schist. Most of the plutonic rocks of the dioritic suite are dioritic, but they range from gabbro to trondhjemite and rarely contain potassium feldspar. The sequences and an associated dioritic suite become younger toward the eastern shield, that is, the primary crust of the shield youngs toward the east. Two western sequences consist of the Jiddah (Samran) and BaishBahah Groups and range in radiometric age from about 900 to 800 m.y.; the eastern sequence consists of the Halaban (Hulayfah) Group and ranges from 800 to about 700 m.y. During subsequent orogeny, most of the rocks were intensely deformed and mostly metamorphosed to upper greenschist facies, but rising in places to the almandine-amphibolite facies. Two other lithostratigraphic sequences with an associated plutonic granitic suite are the products of two mountain-building episodes during which the primary crust was greatly thickened and converted into craton. The two sequences, including largely the Ablah (Al Ays) and Murdama (Shammar) Groups, consist of abundant sedimentary rocks, commonly arkosic, that are the erosional products of the orogenic mountains. They are several thousand meters thick. Less abundant calc-alkalic to alkalic volcanic rocks, commonly dacitic and rhyolitic, are intercalated with the sedimentary rocks. The plutonic rocks of the granitic suite in association with both sequences have syntectonic and posttectonic phases, are products of the orogenies, and are the principal new ingredients making up the craton. Gneiss domes were a significant part of these cratonization orogenies. In association with orogenic crustal heating, some of the low-density, more silicic tonalitic and trondhjemitic rocks of the primary crust rose as gneiss domes. Partial melting in the middle or lower crust below the gneiss domes produced large volumes of granitic magma that intruded the gneiss domes as granodioritic batholiths. The Ablah Group and the older part of the granitic suite are about 775 to 740 Ma old and are associated with the Ablah orogeny and early cratonization in the western and earlier formed half of the shield. The Murdama (Shammar) Group and the younger part of the granitic suite are about 660 to 580 Ma old and are associated with the culminant orogeny and late cratonization that was shieldwide. The granitic suite during both orogenies consists of early, syntectonic granodiorite batholiths associated with the gneiss domes and late, posttectonic monzogranite plutons. Only during the culminant orogeny, late magmatic evolution produced syenogranite and alkali-feldspar granite commonly in circular and ring-structured plutons and with associated explosive volcanic deposits (Shammar Group); final products, some of which have economic potential, were peralkalic and peraluminous. The late plutonism of the culminant orogeny was distinctly bimodal in that subordinate gabbroic rocks are associated with the granites. Various building blocks or terranes of the andesitic and dioritic primary crust were collisionally agglomerated during the Ablah orogeny, early cratonization, whereas the entire shield as currently exposed was further collisionally accreted and compressionally consolidated during the culminant orogeny, final cratonization. Thousands of kilometers of oceanic crust had to be subducted in about 300 m.y. to form the large primary crust of the Arabian Shield. The inevitable collisional events during consumption of such a large volume of oceanic crust invariably led to numerous collisional orogenies that collectively encompass the widely known Pan African tectonic episode. The youngest lithostratigraphic sequence, the Jubaylah Group, is essentially postcratonic, although it is the end product of the collisional culminant orogeny. Final east-west compression of the entire shield from about 580 to 560 m.y. caused the craton to fracture along the large northwest-trending, left-lateral faults and elsewhere along lesser, northeast-trending, right-lateral, conjugate faults of the N ajd fault system. Erosional products of this more localized deformation were the sedimentary rocks of the Jubaylah Group, which also includes intercalated andesitic to basaltic volcanic rocks of a mafic alkalic compositional trend. The collisional edge of an old continental plate (or tectonic fragments thereof), suspected on the eastern edge of the Arabian Shield, has not been shown with certainty to be exposed. Presumably, widespread contamination from such an old continental crust affects U/Pb, Sm/Nd, Rb/Sr, and common lead ratios in the young plutonic rocks of the easternmost shield. One mass of anorthosite near Jabal Khida' on the central eastern edge of the shield may be a fragment of this old continental plate in that associated granodiorite may be as old as 1,600 to 1,800 Ma. Epeirogenic uplift, erosion, and cooling of the uppermost shield during Early and Middle Cambrian time is indicated by an average fission track age of 510±52 m.y., on sphene from diorite (hornblende K-Ar age of 615±12 m.y.) in the southwestern part of the shield. The hiatus was followed by extensive deposition of the Cambro-Ordovician Saq Sandstone in the north and northeast and the Wajid Sandstone in the southeast and south of the shield. The Cambrian Siq Sandstone had already been deposited in the northern part. During the middle and late Paleozoic, broad epeirogeny caused further erosion of the shield until marine transgression deposited the Upper Permian Khuff Formation at least in the eastern part of the shield. In the southwestern shield, the nonmarine Upper Triassic Khums Sandstone was deposited variably on Wajid or Precambrian rocks and is overlain by limestone of the middle Upper Jurassic Amran Formation. Except for shallow marine sandstone of problematic Cretaceous age deposited on the Amran Formation in the south.western shield and on Precambrian rocks in the northwestern shield, the younger beds on the shield are Paleocene and younger, with the possibility that the lowermost are upper Maestrichtian. The early Tertiary beds contain vertebrate fossils of coastal marine or estuarine environment 250 km east of the Red Sea in the central shield. Marginal marine sediments were deposited in a western tongue of the latest Tethys Sea as late as Eocene on the western shield and at least as far south as Jiddah. The great harrats of flood basalt erupted on th~ western shield during late Oligocene and early Miocene at the same time a 2,000-kmlong continental rift valley developed along the future Red Sea axis. Within this rift valley, Baid freshwater tuffaceous lakebeds were deposited between mafic and silicic volcanoes. During late early Miocene time, the Red Sea opened at a rate of 4.4 cm/yr in a firststage movement while continental dikes and swarms of oceanic tholeiitic dikes, gabbro, and granophyre plutonic rocks were intruded into the rift sedimentary and volcanic rocks at the newly formed continental margin. The continental margin was deformed and greatly extended at this time. About 14 or 15 m.y., as the first-stage spreading stopped, the Red Sea Escarpment rose; its erosion caused deposition of coarse conglomerate of the Bathan Formation. About 3,000 m of evaporite was deposited on the young Red Sea oceanic crust during the late Miocene desiccation crisis. A second stage of sea-floor spreading about 4-5 m.y. produced the Red Sea axial trough, consisting of oceanic crust, as well as renewed uplift and tilting of the three tectonic provinces in response to compression from counterclockwise rotation against the Dead Sea Rift. This late movement caused widespread major stream capture, especially along the wadis that formerly drained southwesterly or northwesterly, the channels turning westward through narrow gorges to the coastal plain and the Red Sea.

Professional Paper↗
USGS1966

Geology of the Arabian Peninsula: Sedimentary geology of Saudi Arabia

Systematic mapping of the sedimentary geology of Saudi Arabia by Arabian-American Oil Co. (Aramco) began in 1933. By 1959, exploration parties of one type or another had surveyed more than 1,300,000 square kilometers (500,000 square miles) of sedimentary outcrop. The foundation for sedimentary deposition is the Arabian Shield a vast Precambrian complex of igneous and metamorphic rocks that occupies roughly one-third of the Arabian Peninsula in the west and crops out sporadically along the southern coast. Since the outset of the Paleozoic Era the shield has been amazingly stable, subject only to gentle, epeirogenic movement. On this rigid land mass was deposited an aggregate total of nearly 5,500 meters (18,000 feet) of sedimentary rocks ranging in age from presumed Cambrian to Pliocene(?). Paleozoic, Mesozoic, and lower Tertiary strata are magnificently exposed in central Arabia where they crop out in a great curved belt bordering the shield. Here the landscape is dominated by a series of essentially parallel west-facing escarpments, each supported by a resistant limestone cap. Exposures are unusually good, and many rock units can be traced without significant interruption for 500 to nearly 1,000 km. Beds reflecting buried basement configuration dip gently and uniformly away from the escarpment region into the Persian Gulf and Rub' al Khali basins. East of the escarpment belt is a broad expanse of relatively low-relief terrain in which Tertiary and younger deposits effectively mask older units. Clues to the character of pre-Tertiary rocks in this large area, which includes the Rub' al Khali desert and most of northeastern Arabia, are afforded only by widely scattered bore holes and oil wells. In extreme northwestern Arabia, largely lower Paleozoic sedimentary rocks are exposed, although a basinal area bordering the Paleozoic rocks on the north is characterized by thick Upper Cretaceous to Tertiary strata. Tertiary to Recent volcanic rocks cover substantial parts of the area. In general the older sedimentary rocks are exposed in north-central and northwestern Arabia near the Precambrian basement where as much as 2,000 m of lower Paleozoic rocks are present. Although unfossiliferous, the lower 600 m can be equated, at least in part, to rocks of certain Cambrian age in Jordan. Higher beds contain intervals confidently dated as Lower Ordovician, Silurian, and Lower Devonian. Lower Paleozoic rocks are chiefly coarse-grained sandstone of terrestrial origin, although marine shale occurs at several levels and the upper 300 m is mainly shale with thin beds of limestone. Lower Paleozoic strata are succeeded in the central escarpment region by a thick sequence (about 1,000 m) of Upper Permian and Triassic sedimentary rocks. The initial deposit, the Khuff Formation, is mostly shallow-water limestone; overlying beds are nonmarine elastics except for thick carbonate units in the middle part of the section. Above the Triassic System is some 200 to 500 m of Lower and Middle Jurassic rocks which, near the middle of the escarpment region, are interbedded marine shale and shelf limestone. These grade to sandstone, in part continental, in the northern and southern areas of outcrop. The Middle Jurassic is overlain by a great sequence-of nearly pure carbonate rocks, highly fossiliferous and accurately dated as Upper Jurassic and early Lower Cretaceous. The Jurassic System is spectacularly displayed in central Arabia where it forms the backbone of the escarpment region the Tuwayq Mountains. Carbonate sedimentation was interrupted several times in the closing stages of the Jurassic b^ the onset of evaporite conditions which gave rise to cyclic deposits of anhydrite and calcarenite. The resulting sequence the Arab Formation is of prime importance for its porous carbonate members contain billions of barrels of proved oil reserves The carbonate sequence is succeeded by a thick body of late Lower and Middle Cretaceous sandstone. (The Middle Cretaceous Series and Epoch, as defined by European geologist-, are used in this report.) Late Lower Cretaceous rocks are nonmarine and appear only in the middle and southern parts of the escarpment region. Middle Cretaceous rocks, nonmarine in the south, become progressively more marine in the north where they follow a transgressive path northwest across older beds as far as Jordan. Upper Cretaceous and Eocene rocks, almost exclusively in limestone and dolomite facies, are extensively exposed alorc the eastern edge of the escarpment belt and continue northwest into Iraq. The sequence, with an average thickness of about 5^0 m, includes rocks of Upper Cretaceous, Paleocene, lower Eocene, and middle Eocene ages. The stratigraphic sequence above the Eocene consists of 200 to 600 m of Miocene and Pliocene rocks, mostly of nonmarine origin. These deposits a heterogeneous assemblage of marly sandstone, sandy marl, and sandy limestone blanket the Rub' al Khali and northeastern Arabia. Above the Miocene and Pliocene rocks are unconsolidated Quaternary deposits which comprise great sand deserts and widespread gravel sheets. Sand of the Rub' al Khali Desert alone covers about 600,000 sq km (230,000 sq mi) or most of southern Arabia. Two major structural provinces are recognized within the Arabian Peninsula and adjacent areas. One is the comparatively stable interior region whose rigidity is controlled by the Precambrian basement. The other is the great mobile belt of Taurus, Zagros, and Oman Mountains, bordering the stable region on the north and east. Saudi Arabia falls entirely within the stable region. The interior stable region contains the Arabian shield as well as the Arabian Shelf an extension of the basement thinly veneered with little-disturbed sedimentary rocks. Widespread structural events, presumably related to epeirogenic movement within the basement, have divided the Arabian Shelf into several distinct and significant structural elements the Interior Homocline, the Interior Platform, and several basinal areas. Bordering the shield is a great belt of sedimentary rocks whose dip basinward is so slight and uniform as to be impreceptible to the eye. This Interior Homocline has an average width of about 400 km and a persistent dip varying from slightly more than 1°00' in older units to less than 0°30' in the youngest. One structural feature of the homocline the central Arabian arch has greatly influenced the present surface distribution of sedimentary rocks in the interior escarpment region. The arch, which affects all rocks from the basement up, marks the area of maximum curvature of the homocline in central Arabia. Although the arch has a varied history, it is apparently a residual high between the periodically sinking Persian Gulf and Rub' al Khali basins rather than a true independent positive feature. Support for this concept conies from the presence of a great arc of tensional structures the central Arabian graben and trough system near the crest of the arch and along the hinge line between the Persian Gulf basin and the stable western block. Bordering the homocline is the Interior Platform, a remarkably flat area of varying width in which systematic dip off the crystalline core no longer prevails. Superimposed on the platform are several major north-south anticlinal trends which include the great oil fields of Arabia Adjacent to the platform are several basinal areas that have from time to time received thick sedimentary deposits. Such basinal sags have developed on the shelf in the northeastern Rub' al Khali, northern Persian Gulf, Dibdibah and Sirhan-Turayf areas.

Professional Paper↗
USGS1975

Geology of the Sierra Foothills Melange and adjacent areas, Amador County, California

Detailed outcrop mapping in the western Sierra foothills of Amador County, Calif., has resulted in some major changes in the interpretation of stratigraphy and structure. The Amador Group was originally defined at its type locality on the south bank of the Cosumnes River in Amador County to include the Cosumnes Formation and the conformably overlying Logtown Ridge Formation, but the new data indicate that the lower boundary of the type Logtown Ridge should be located 600 m farther west (downsection) than originally designated and that this boundary is a fault. The strata that were originally called the Cosumnes Formation are part of a lithologically diverse assemblage of tectonically intermixed rocks that constitute a newly recognized melange and thus are not a formational rock-stratigraphic unit as the earlier workers believed. Thus, the names Cosumnes Formation and Amador Group are both inappropriate in their type area and are abandoned. The Logtown Ridge Formation is here divided into four members, some of which cross what earlier was considered to be a formational boundary of the Logtown Ridge with overlapping pyroclastic strata. The outcrop mapping requires additional changes, although of lesser importance, in the identification and correlation of other Mesozoic rocks in Amador County. The newly recognized melange forms a 4-km-wide belt underlying the Logtown Ridge Formation. In addition to the type section of the abandoned Cosumnes Formation and scattered fault-bounded blocks of strata of Cosumnes lithology, the melange comprises rocks heretofore mapped as "western belt of Calaveras Formation," considered to be of Paleozoic age. Single clasts of this huge tectonic breccia range from a few centimeters to a few kilometers in maximum dimension. Distinctive strata are generally disrupted, and pervasive shearing is common. In the absence of fossils, no age of original deposition can be assigned to any clast or matrix of the melange, but on the basis of indirect structural evidence, the intermixing that formed the melange probably took place during the Late Jurassic or before, and therefore the now sheared and faulted strata must originally have been at least this old. Available data are ambiguous but suggest that rocks were intermixed to form the melange when the strata were horizontal or nearly so. Similarly, the overlying Logtown Ridge and Mariposa Formations were faulted when these rocks were essentially horizontal. The entire section was subsequently tilted to its present, nearly vertical position. Traditional syntheses of the tectonic history of the Sierra foothills argue that the faults there have always been steeply dipping. Although this may be true for some faults, the new interpretation suggests that most faulting occurred before the section was steeply tilted. Neither suggestion can yet be proved, but we maintain that the highly deformed rocks mapped in Amador County represent primarily the effects of subduction at a continental margin, possibly augmented by gravity tectonics in a trough of sediment accumulation there. On the basis of the ages of affected strata, this period of subduction was Late Jurassic but possibly began at an earlier time. If this interpretation of the melange in Amador County is correct, a belt of similarly deformed rocks should extend far beyond the limits of the study area.

California↗
USGS2011

Biostratigraphic data from Upper Cretaceous formations-eastern Wyoming, central Colorado, and northeastern New Mexico

Lithological and paleontological studies of outcrops of Upper Cretaceous formations were conducted at 12 localities in eastern Wyoming, central Colorado, and northeastern New Mexico. The sequence extends upward from the top of the Mowry Shale, or age-equivalent rocks, through the Graneros Shale, Greenhorn Limestone, Carlile Shale, Niobrara Formation, Pierre Shale, and Fox Hills Sandstone, or age-equivalent formations, to the top of the Laramie Formation, or laterally equivalent formations. The strata are mainly siliciclastic and calcareous, with thicknesses ranging from about 3,300 ft in northeastern New Mexico to as much as 13,500 ft in eastern Wyoming. Deposition was mainly in marine environments and molluscan fossils of Cenomanian through Maastrichtian ages are common. Radiometric ages were determined from beds of bentonite that are associated with fossil zones. The Upper Cretaceous formations at the 12 study localities are herein divided into three informal time-stratigraphic units based on fossil content and contact relations with adjacent strata. The basal unit in most places extends from the base of the Graneros to the top of the Niobrara, generally to the horizon of the fossil Scaphites hippocrepis, and spans a period of about 14 million years. The middle unit generally extends from the top of the Niobrara to the approximate middle of the Pierre, the horizon of the fossil Baculites gregoryensis, and represents a period of about 5 million years. The upper unit includes strata between the middle of the Pierre and the top of the Upper Cretaceous Series, which is the top of the Laramie Formation or of laterally equivalent formations; it represents a period of deposition of as much as 11 million years. Comparisons of the collections of fossils from each outcrop with the complete sequence of Upper Cretaceous index fossils can indicate disconformable contacts and lacunae. Widespread disconformities have been found within the Carlile Shale and between the Carlile Shale and the Niobrara Formation. Less extensive disconformities are within the Greenhorn Formation, the Niobrara Formation, and the Pierre Shale.

Scientific Investigations Map↗
USGS2013

Map Showing Principal Coal Beds and Bedrock Geology of the Ucross-Arvada Area, Central Powder River Basin, Wyoming

The Ucross-Arvada area is part of the Powder River Basin, a large, north-trending structural depression between the Black Hills on the east and the Bighorn Mountains on the west. Almost all of the study area is within Sheridan and Johnson Counties, Wyoming. Most of the Ucross-Arvada area lies within the outcrop of the Wasatch Formation of Eocene age; the extreme northeast corner falls within the outcrop of the Tongue River Member of the Fort Union Formation of Paleocene age. Within the Powder River Basin, both the Wasatch Formation and the Tongue River Member of the Fort Union Formation contain significant coal resources. The map includes locations and elevations of coal beds at 1:50,000 scale for an area that includes ten 7½-minute quadrangles covering some 500 square miles. The Wasatch Formation coal beds shown (in descending order) are Monument Peak, Walters (also called Ulm 1), Healy (also called Ulm 2), Truman, Felix, and Arvada. The Fort Union Formation coal beds shown (in descending order) are Roland (of Baker, 1929) and Smith.

Wyoming↗
USGS2014

Geology and hydrostratigraphy of Guadalupe River State Park and Honey Creek State Natural Area, Kendall and Comal Counties, Texas

Hydrogeologic mapping and descriptions of the lithostratigraphy and hydrostratigraphy of Guadalupe River State Park and Honey Creek State Natural Area, Kendall and Comal Counties, Texas, are presented in this first detailed 1:24,000 geologic map, along with proposed names and descriptions of the hydrostratigraphic units in the study area. Variations in the amount and type of porosity of the lithostratigraphic unit, which vary depending on the depositional environment, lithology, structural history and diagenesis support the resulting hydrostratigraphy proposed herein. Rocks exposed in the study area consist of Early Cretaceous sedimentary rocks that are assigned to the Trinity Group. The lithostratigraphy includes the Hammett Shale, Cow Creek Limestone, Hensell Sand Members of the Pearsall Formation, and the lower member of the Glen Rose Limestone. These lithologic units contain shale, grainstone, sandstone, and fossiliferous limestone, alternating and interfingering with mudstone, wackestone, packstone, and grainstone. The Trinity aquifer hydrostratigraphic units shown on the map and described herein are characterized by their porosity types. Porosity types were first determined from an analysis of two boreholes conducted in comparison with 143 geophysical logs from northern Bexar County, Texas. The cores and geophysical log comparison resulted in division of the lower member of the Glen Rose Limestone into six hydrostratigraphic units, designated A through F. Of those six units, only three remain in the study area because of erosion. The proposed naming of these three hydrostratigraphic units is based on topographic or historical features that occur in the outcrop area of those units. Hydrostratigraphic units that correlate with the boundaries of the formation have been given formational names excluding the lithologic modifier. The Doeppenschmidt hydrostratigraphic unit is stratigraphically the highest interval in the study area, characterized by interparticle, moldic, burrowed, bedding plane, fracture, and cave porosity. The underlying Rust hydrostratigraphic unit appears to be a confining unit with springs/seeps issuing near the contact with the overlying Doeppenschmidt unit. The Rust unit has interparticle, fracture, and cave porosity with cave porosity primarily associated with faulting. The Honey Creek hydrostratigraphic unit is an aquifer in the subsurface and exhibits extremely, well developed porosity and permeability including— interparticle, moldic, burrowed, bedding plane, fracture, channel, and cave porosity. This unit is named for Honey Creek Cave, which discharges water into Honey Creek. The Hensell hydrostratigraphic unit contains primarily interparticle porosity, but also exhibits some moldic and cave porosity in its upper parts. The Cow Creek hydrostratigraphic unit contains interparticle, moldic, vug, burrowed, fracture, bedding plane, channel, and cave porosity. The Cow Creek hydrostratigraphic unit is an aquifer in the subsurface and is the primary target for water-well drillers in the area. The Hammett hydrostratigraphic unit is not exposed in the study area but is thought to underlie parts of the Guadalupe River, based on mapping of the overlying units and comparisons with subsurface thicknesses obtained from the geophysical log. The Hammett unit restricts the downward migration of groundwater, resulting in springs that discharge at the base of the Cow Creek unit. These springs also create some base flow to the Guadalupe River during periods of extreme drought. The faulting and fracturing in the study area are part of the Miocene Balcones Fault Zone, which is an extensional system of faults that generally trend southwest to northeast in south-central Texas. An igneous dike, containing aphanitic texture, cuts through the center of the study area near the confluence of Honey Creek and the Guadalupe River. The dike penetrates the Cow Creek Limestone and the lower part of the Hensell Sand, which outcrops at three locations.

Texas↗
USGS2015

Bedrock geologic map of the Worcester South quadrangle, Worcester County, Massachusetts

The bedrock geology of the 7.5-minute Worcester South quadrangle, Massachusetts, consists of deformed Neoproterozoic to Paleozoic crystalline metamorphic and intrusive igneous rocks in three fault-bounded terranes (zones), including the Avalon, Nashoba, and Merrimack zones (Zen and others, 1983). This quadrangle spans the easternmost occurrence of Ganderian margin arc-related rocks (Nashoba zone) in the southern New England part of the northern Appalachians, and coincides with the trailing edge of Ganderia (Merrimack and Nashoba zones) where it structurally overlies Avalonia (Hibbard and others, 2006; Pollock and others, 2012; van Staal and others, 2009, 2012). Neoproterozoic intrusive rocks and minor metasedimentary rocks crop out in the Avalon zone and structurally underlie the rocks of the Nashoba zone along the Bluddy Bluff fault. Due to poor exposure, the position of the Bloody Bluff fault is not well-constrained and its location is partly extrapolated from mapping in adjacent areas (Barosh, 2005; Walsh and others, 2011a). Cambrian intrusive rocks and Cambrian to Silurian metasedimentary and metavolcanic rocks crop out in the Nashoba zone, and are overlain by largely Silurian metasedimentary rocks of the Merrimack zone along the Clinton-Newbury fault. Ordovician to Permian(?) plutonic rocks intrude the Merrimack and Nashoba zone rocks. Paleozoic metamorphism in the Merrimack and Nashoba zones peaked during Salinic, Acadian, and Neoacadian orogenesis from the Silurian to Mississippian (Wintsch and others, 2007; Stroud and others, 2009; Walsh and others, 2011a; Hepburn and others, 2014). Metamorphism in the Avalon zone peaked during Alleghanian orogenesis in the Mississippian to Permian (Wintsch and others, 1992, 1993, 2001; Attenoukon, 2008). Evidence for garnet-grade extensional Alleghanian mylonitization showing normal motion along the Clinton-Newbury fault occurred after presumed original terrane juxtaposition by left-lateral Acadian thrusting (Goldstein, 1994). Subsequent post-peak metamorphic deformation produced outcrop-scale open folds and weak cleavage, local faults, veins, shear bands, and pegmatite dikes. Locally, along re-activated ductile faults such as the Bloody Bluff fault and along the Wekepeke fault, late Paleozoic to Mesozoic mainly brittle normal fault motion led to the current configuration of fault-bounded lithotectonic terranes (Goldstein, 1982, 1994, 1998; Goldstein and Hepburn, 1999; Goldsmith, 1991; Attenoukon, 2008; Wintsch and others, 2012). The youngest deformation includes kink bands, brittle faults, and joints. The bedrock geology was mapped to study the tectonic history of the area and to provide a framework for ongoing hydrogeologic characterization of the fractured bedrock of Massachusetts. This report presents mapping by Gregory J. Walsh and Arthur J. Merschat from 2008 to 2010. The report consists of a map and GIS database, both of which are available for download at http://dx.doi.org/ 10.3133/sim3345. The database includes contacts of bedrock geologic units, faults, outcrop locations, structural information, and photographs.

Massachusetts↗